! Started logfile: ./J1810+1608_X_uvs.log on Mon Oct 28 15:39:42 2013
obs J1810+1608_X_uvm.fits
! Reading UV FITS file: J1810+1608_X_uvm.fits
! AN table 1: 19 integrations on 28 of 28 possible baselines.
! AN table 2: 10 integrations on 36 of 36 possible baselines.
! AN table 3: 15 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.919207 visibilities/baseline/integration-bin.
! Found source: J1810+1608
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 9648 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet ./J1810+1608_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 16 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.000325Jy  sigma=1.356034
! Fit after  self-cal, rms=0.972464Jy  sigma=1.310255
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8313 mas, bmaj=1.954 mas, bpa=-2.445 degrees
! Estimated noise=10.9756 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0233241 Jy
! Component: 100  -  total flux cleaned = 0.0285752 Jy
! Total flux subtracted in 100 components = 0.0285752 Jy
! Clean residual min=-0.001387 max=0.001882 Jy/beam
! Clean residual mean=-0.000000 rms=0.000326 Jy/beam
! Combined flux in latest and established models = 0.0285752 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0285752 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018075Jy  sigma=0.024500
! Fit after  self-cal, rms=0.015513Jy  sigma=0.021349
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00305309 Jy
! Component: 100  -  total flux cleaned = 0.00441778 Jy
! Total flux subtracted in 100 components = 0.00441778 Jy
! Clean residual min=-0.001068 max=0.001109 Jy/beam
! Clean residual mean=-0.000001 rms=0.000247 Jy/beam
! Combined flux in latest and established models = 0.0329929 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 18 components and 0.032993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015494Jy  sigma=0.019603
! Fit after  self-cal, rms=0.015488Jy  sigma=0.019594
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.09 mas, bmaj=2.367 mas, bpa=-1.74 degrees
! Estimated noise=5.74336 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0012965 Jy
! Component: 100  -  total flux cleaned = 0.00200025 Jy
! Component: 150  -  total flux cleaned = 0.00241402 Jy
! Component: 200  -  total flux cleaned = 0.00266709 Jy
! Total flux subtracted in 200 components = 0.00266709 Jy
! Clean residual min=-0.000799 max=0.001537 Jy/beam
! Clean residual mean=-0.000003 rms=0.000250 Jy/beam
! Combined flux in latest and established models = 0.03566 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 39 components and 0.03566 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015568Jy  sigma=0.019179
! Fit after  self-cal, rms=0.015564Jy  sigma=0.019172
! Inverting map 
! Added new window around map position (1.6, 4.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00154352 Jy
! Component: 100  -  total flux cleaned = 0.00240093 Jy
! Component: 150  -  total flux cleaned = 0.00297849 Jy
! Component: 200  -  total flux cleaned = 0.00338951 Jy
! Total flux subtracted in 200 components = 0.00338951 Jy
! Clean residual min=-0.000724 max=0.000771 Jy/beam
! Clean residual mean=-0.000002 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0390496 Jy
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 77 components and 0.0390496 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015418Jy  sigma=0.018881
! Fit after  self-cal, rms=0.015383Jy  sigma=0.018823
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        0.85     KP        0.95     LA        0.98     
!   MK        0.94     NL        1.08     OV        0.97     PT        0.88     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     HN        0.83     KP        1.01     LA        0.95     
!   MK        1.05     NL        1.07     OV        1.05     PT        0.87     
!   SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.99     HN        0.98     KP        0.98     LA        0.99     
!   NL        1.02     OV        0.97     PT        0.90     SC        0.97     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     HN        0.94     KP        0.97     LA        0.94     
!   MK        0.94     NL        1.02     OV        1.00     PT        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     HN        0.88     KP        1.05     LA        0.97     
!   MK        0.94     NL        1.03     OV        0.96     PT        0.93     
!   SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.13     HN        0.90     KP        0.98     LA        0.98     
!   NL        1.02     OV        0.91     PT        0.88     SC        0.94     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.73     HN        0.93     KP        1.08     LA        0.92     
!   MK        1.06     NL        0.96     OV        1.01     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.82     HN        0.96     KP        1.14     LA        0.98     
!   MK        1.03     NL        1.08     OV        0.96     PT        0.96     
!   SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.86     HN        0.93     KP        1.01     LA        0.92     
!   NL        1.06     OV        0.98     PT        0.94     SC        0.95     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     HN        0.92     KP        0.94     LA        0.94     
!   MK        1.00     NL        0.95     OV        1.00     PT        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.96     HN        0.91     KP        0.96     LA        0.97     
!   MK        1.08     NL        1.01     OV        1.04     PT        0.98     
!   SC        0.98     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.93     HN        0.93     KP        0.96     LA        0.95     
!   NL        1.01     OV        1.02     PT        0.93     SC        0.95     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.89     HN        0.97     KP        1.11     LA        0.96     
!   MK        0.93     NL        0.89     OV        1.00     PT        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     HN        0.92     KP        1.07     LA        0.95     
!   MK        0.95     NL        0.99     OV        1.05     PT        0.99     
!   SC        0.86     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.90     HN        1.01     KP        1.06     LA        1.00     
!   NL        0.94     OV        0.97     PT        0.91     SC        1.01     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.02     KP        0.99     LA        1.04     
!   MK        1.00     NL        1.02     OV        1.02     PT        0.90     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.11     HN        0.97     KP        1.07     LA        1.04     
!   MK        0.97     NL        1.04     OV        1.02     PT        0.97     
!   SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.02     HN        0.94     KP        0.98     LA        1.08     
!   NL        1.06     OV        1.00     PT        0.90     SC        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     HN        0.92     KP        1.01     LA        0.93     
!   MK        0.98     NL        1.06     OV        1.01     PT        0.87     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     HN        1.08     KP        1.02     LA        0.96     
!   MK        0.99     NL        0.97     OV        0.95     PT        0.99     
!   SC        0.93     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.94     HN        0.92     KP        0.96     LA        0.93     
!   NL        0.99     OV        1.10     PT        0.90     SC        0.88     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     HN        0.99     KP        1.05     LA        0.92     
!   MK        0.91     NL        0.96     OV        1.02     PT        0.83     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.24     HN        0.97     KP        1.11     LA        0.89     
!   MK        1.02     NL        0.94     OV        1.01     PT        0.88     
!   SC        1.07     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.12     HN        0.90     KP        1.02     LA        0.94     
!   NL        0.93     OV        1.06     PT        0.86     SC        1.12     
! 
! 
! Fit before self-cal, rms=0.015383Jy  sigma=0.018823
! Fit after  self-cal, rms=0.014807Jy  sigma=0.018030
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.088 mas, bmaj=2.364 mas, bpa=-1.794 degrees
! Estimated noise=5.40374 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00147766 Jy
! Component: 100  -  total flux cleaned = -0.00140879 Jy
! Component: 150  -  total flux cleaned = -0.00139496 Jy
! Component: 200  -  total flux cleaned = -0.00136508 Jy
! Total flux subtracted in 200 components = -0.00136508 Jy
! Clean residual min=-0.000430 max=0.000611 Jy/beam
! Clean residual mean=-0.000000 rms=0.000114 Jy/beam
! Combined flux in latest and established models = 0.0376845 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 90 components and 0.0376845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014289Jy  sigma=0.018200
! Fit after  self-cal, rms=0.014299Jy  sigma=0.018186
! Inverting map 
! Added new window around map position (-2.8, 17.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000598597 Jy
! Component: 100  -  total flux cleaned = 0.000927957 Jy
! Component: 150  -  total flux cleaned = 0.00114726 Jy
! Component: 200  -  total flux cleaned = 0.0012357 Jy
! Total flux subtracted in 200 components = 0.0012357 Jy
! Clean residual min=-0.000405 max=0.000355 Jy/beam
! Clean residual mean=0.000000 rms=0.000097 Jy/beam
! Combined flux in latest and established models = 0.0389202 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 127 components and 0.0389202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014260Jy  sigma=0.018155
! Fit after  self-cal, rms=0.014259Jy  sigma=0.018150
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014259Jy  sigma=0.018150
! Fit after  self-cal, rms=0.013875Jy  sigma=0.017850
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.085 mas, bmaj=2.359 mas, bpa=-1.826 degrees
! Estimated noise=5.09681 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00140478 Jy
! Component: 100  -  total flux cleaned = -0.00158022 Jy
! Component: 150  -  total flux cleaned = -0.00150108 Jy
! Component: 200  -  total flux cleaned = -0.00142566 Jy
! Total flux subtracted in 200 components = -0.00142566 Jy
! Clean residual min=-0.000349 max=0.000305 Jy/beam
! Clean residual mean=-0.000000 rms=0.000083 Jy/beam
! Combined flux in latest and established models = 0.0374945 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 140 components and 0.0374945 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013437Jy  sigma=0.018052
! Fit after  self-cal, rms=0.013439Jy  sigma=0.018049
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.97619e-05 Jy
! Component: 100  -  total flux cleaned = 0.000157302 Jy
! Component: 150  -  total flux cleaned = 0.000212747 Jy
! Component: 200  -  total flux cleaned = 0.000239671 Jy
! Total flux subtracted in 200 components = 0.000239671 Jy
! Clean residual min=-0.000341 max=0.000304 Jy/beam
! Clean residual mean=-0.000000 rms=0.000082 Jy/beam
! Combined flux in latest and established models = 0.0377342 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 146 components and 0.0377342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013430Jy  sigma=0.018051
! Fit after  self-cal, rms=0.013430Jy  sigma=0.018051
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013430Jy  sigma=0.018051
! Fit after  self-cal, rms=0.013071Jy  sigma=0.017834
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.082 mas, bmaj=2.353 mas, bpa=-1.845 degrees
! Estimated noise=4.81219 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00129595 Jy
! Component: 100  -  total flux cleaned = -0.00157359 Jy
! Component: 150  -  total flux cleaned = -0.00159033 Jy
! Component: 200  -  total flux cleaned = -0.00158347 Jy
! Total flux subtracted in 200 components = -0.00158347 Jy
! Clean residual min=-0.000323 max=0.000284 Jy/beam
! Clean residual mean=-0.000000 rms=0.000077 Jy/beam
! Combined flux in latest and established models = 0.0361507 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 156 components and 0.0361507 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012668Jy  sigma=0.018044
! Fit after  self-cal, rms=0.012667Jy  sigma=0.018043
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.34281e-05 Jy
! Component: 100  -  total flux cleaned = 6.64967e-05 Jy
! Component: 150  -  total flux cleaned = 8.16751e-05 Jy
! Component: 200  -  total flux cleaned = 8.7286e-05 Jy
! Total flux subtracted in 200 components = 8.7286e-05 Jy
! Clean residual min=-0.000319 max=0.000288 Jy/beam
! Clean residual mean=-0.000000 rms=0.000076 Jy/beam
! Combined flux in latest and established models = 0.036238 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 168 components and 0.036238 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012663Jy  sigma=0.018045
! Fit after  self-cal, rms=0.012663Jy  sigma=0.018045
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012663Jy  sigma=0.018045
! Fit after  self-cal, rms=0.012324Jy  sigma=0.017829
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.047 mas, bmaj=3.351 mas, bpa=-6.756 degrees
! Estimated noise=5.34988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00117585 Jy
! Component: 100  -  total flux cleaned = -0.00144142 Jy
! Component: 150  -  total flux cleaned = -0.00150072 Jy
! Component: 200  -  total flux cleaned = -0.00152211 Jy
! Total flux subtracted in 200 components = -0.00152211 Jy
! Clean residual min=-0.000316 max=0.000301 Jy/beam
! Clean residual mean=-0.000000 rms=0.000087 Jy/beam
! Combined flux in latest and established models = 0.0347159 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 174 components and 0.0347159 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011961Jy  sigma=0.018022
! Fit after  self-cal, rms=0.011961Jy  sigma=0.018021
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.51694e-05 Jy
! Component: 100  -  total flux cleaned = 3.79149e-05 Jy
! Component: 150  -  total flux cleaned = 3.54672e-05 Jy
! Component: 200  -  total flux cleaned = 3.54711e-05 Jy
! Total flux subtracted in 200 components = 3.54711e-05 Jy
! Clean residual min=-0.000311 max=0.000300 Jy/beam
! Clean residual mean=-0.000000 rms=0.000086 Jy/beam
! Combined flux in latest and established models = 0.0347514 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 181 components and 0.0347514 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011955Jy  sigma=0.018026
! Fit after  self-cal, rms=0.011956Jy  sigma=0.018026
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=2.347 mas, bpa=-1.836 degrees
! Estimated noise=4.54353 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.079 x 2.347 at -1.836 degrees (North through East)
! Clean map  min=-0.00028638  max=0.02526 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8274 mas, bmaj=1.948 mas, bpa=-2.765 degrees
! Estimated noise=8.61478 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0192512 Jy
! Component: 100  -  total flux cleaned = 0.0238841 Jy
! Component: 150  -  total flux cleaned = 0.0257758 Jy
! Component: 200  -  total flux cleaned = 0.0269356 Jy
! Total flux subtracted in 200 components = 0.0269356 Jy
! Clean residual min=-0.000718 max=0.000723 Jy/beam
! Clean residual mean=-0.000000 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.0269356 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0269356 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=2.347 mas, bpa=-1.836 degrees
! Estimated noise=4.54353 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00163553 Jy
! Component: 100  -  total flux cleaned = 0.00274852 Jy
! Component: 150  -  total flux cleaned = 0.0036023 Jy
! Component: 200  -  total flux cleaned = 0.00427935 Jy
! Total flux subtracted in 200 components = 0.00427935 Jy
! Clean residual min=-0.000436 max=0.000478 Jy/beam
! Clean residual mean=-0.000001 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.0312149 Jy
! Adding 57 model components to the UV plane model.
! The established model now contains 75 components and 0.0312149 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.047 mas, bmaj=3.351 mas, bpa=-6.756 degrees
! Estimated noise=5.34988 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000858612 Jy
! Component: 100  -  total flux cleaned = 0.00143544 Jy
! Component: 150  -  total flux cleaned = 0.00186368 Jy
! Component: 200  -  total flux cleaned = 0.00219798 Jy
! Total flux subtracted in 200 components = 0.00219798 Jy
! Clean residual min=-0.000403 max=0.000330 Jy/beam
! Clean residual mean=-0.000001 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.0334129 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00026489 Jy
! Component: 100  -  total flux cleaned = 0.000477045 Jy
! Component: 150  -  total flux cleaned = 0.000649283 Jy
! Component: 200  -  total flux cleaned = 0.0007902 Jy
! Total flux subtracted in 200 components = 0.0007902 Jy
! Clean residual min=-0.000350 max=0.000294 Jy/beam
! Clean residual mean=-0.000000 rms=0.000092 Jy/beam
! Combined flux in latest and established models = 0.0342031 Jy
! Adding 111 model components to the UV plane model.
! The established model now contains 169 components and 0.0342031 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.079 mas, bmaj=2.347 mas, bpa=-1.836 degrees
! Estimated noise=4.54353 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000131869 Jy
! Component: 100  -  total flux cleaned = 0.000184576 Jy
! Component: 150  -  total flux cleaned = 0.000231659 Jy
! Component: 200  -  total flux cleaned = 0.000269431 Jy
! Total flux subtracted in 200 components = 0.000269431 Jy
! Clean residual min=-0.000305 max=0.000274 Jy/beam
! Clean residual mean=-0.000000 rms=0.000074 Jy/beam
! Combined flux in latest and established models = 0.0344725 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 187 components and 0.0344725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011958Jy  sigma=0.018053
! Fit after  self-cal, rms=0.011957Jy  sigma=0.018051
wmodel ./J1810+1608_X_map.mod
! Writing 187 model components to file: ./J1810+1608_X_map.mod
wobs ./J1810+1608_X_uvs.fits
! Writing UV FITS file: ./J1810+1608_X_uvs.fits
wwins ./J1810+1608_X_map.win
! wwins: Wrote 3 windows to ./J1810+1608_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000141688 Jy
! Component: 100  -  total flux cleaned = -0.000261553 Jy
! Component: 150  -  total flux cleaned = -0.000350485 Jy
! Component: 200  -  total flux cleaned = -0.000407627 Jy
! Component: 250  -  total flux cleaned = -0.000421532 Jy
! Component: 300  -  total flux cleaned = -0.000453225 Jy
! Component: 350  -  total flux cleaned = -0.000479757 Jy
! Component: 400  -  total flux cleaned = -0.000497053 Jy
! Component: 450  -  total flux cleaned = -0.000518221 Jy
! Component: 500  -  total flux cleaned = -0.000539038 Jy
! Component: 550  -  total flux cleaned = -0.000559522 Jy
! Component: 600  -  total flux cleaned = -0.00058385 Jy
! Component: 650  -  total flux cleaned = -0.000615742 Jy
! Component: 700  -  total flux cleaned = -0.000639362 Jy
! Component: 750  -  total flux cleaned = -0.000662658 Jy
! Component: 800  -  total flux cleaned = -0.000693372 Jy
! Component: 850  -  total flux cleaned = -0.000712329 Jy
! Component: 900  -  total flux cleaned = -0.000727397 Jy
! Component: 950  -  total flux cleaned = -0.000753388 Jy
! Component: 1000  -  total flux cleaned = -0.000775371 Jy
! Component: 1050  -  total flux cleaned = -0.000786276 Jy
! Component: 1100  -  total flux cleaned = -0.000797049 Jy
! Component: 1150  -  total flux cleaned = -0.00081839 Jy
! Component: 1200  -  total flux cleaned = -0.000828943 Jy
! Component: 1250  -  total flux cleaned = -0.000842872 Jy
! Component: 1300  -  total flux cleaned = -0.00086708 Jy
! Component: 1350  -  total flux cleaned = -0.000873907 Jy
! Component: 1400  -  total flux cleaned = -0.000890902 Jy
! Component: 1450  -  total flux cleaned = -0.00091105 Jy
! Component: 1500  -  total flux cleaned = -0.000904405 Jy
! Component: 1550  -  total flux cleaned = -0.000924202 Jy
! Component: 1600  -  total flux cleaned = -0.000940564 Jy
! Component: 1650  -  total flux cleaned = -0.00094378 Jy
! Component: 1700  -  total flux cleaned = -0.00093737 Jy
! Component: 1750  -  total flux cleaned = -0.000959785 Jy
! Component: 1800  -  total flux cleaned = -0.000966116 Jy
! Component: 1850  -  total flux cleaned = -0.000972424 Jy
! Component: 1900  -  total flux cleaned = -0.00100363 Jy
! Component: 1950  -  total flux cleaned = -0.00100047 Jy
! Component: 2000  -  total flux cleaned = -0.00100353 Jy
! Component: 2050  -  total flux cleaned = -0.00101575 Jy
! Component: 2100  -  total flux cleaned = -0.00101572 Jy
! Component: 2150  -  total flux cleaned = -0.00101873 Jy
! Component: 2200  -  total flux cleaned = -0.00102773 Jy
! Component: 2250  -  total flux cleaned = -0.00104559 Jy
! Component: 2300  -  total flux cleaned = -0.00103376 Jy
! Component: 2350  -  total flux cleaned = -0.00104548 Jy
! Component: 2400  -  total flux cleaned = -0.00105424 Jy
! Component: 2450  -  total flux cleaned = -0.00105132 Jy
! Component: 2500  -  total flux cleaned = -0.00106862 Jy
! Component: 2550  -  total flux cleaned = -0.00106858 Jy
! Component: 2600  -  total flux cleaned = -0.00107713 Jy
! Component: 2650  -  total flux cleaned = -0.0010828 Jy
! Component: 2700  -  total flux cleaned = -0.00109122 Jy
! Component: 2750  -  total flux cleaned = -0.00108843 Jy
! Component: 2800  -  total flux cleaned = -0.00109119 Jy
! Component: 2850  -  total flux cleaned = -0.00109676 Jy
! Component: 2900  -  total flux cleaned = -0.00109402 Jy
! Component: 2950  -  total flux cleaned = -0.00111589 Jy
! Component: 3000  -  total flux cleaned = -0.00111317 Jy
! Component: 3050  -  total flux cleaned = -0.00111588 Jy
! Component: 3100  -  total flux cleaned = -0.00112125 Jy
! Component: 3150  -  total flux cleaned = -0.00112127 Jy
! Component: 3200  -  total flux cleaned = -0.00112657 Jy
! Component: 3250  -  total flux cleaned = -0.00113184 Jy
! Component: 3300  -  total flux cleaned = -0.00112132 Jy
! Component: 3350  -  total flux cleaned = -0.00112397 Jy
! Component: 3400  -  total flux cleaned = -0.0011344 Jy
! Component: 3450  -  total flux cleaned = -0.00114736 Jy
! Component: 3500  -  total flux cleaned = -0.00114996 Jy
! Component: 3550  -  total flux cleaned = -0.00114485 Jy
! Component: 3600  -  total flux cleaned = -0.00114997 Jy
! Component: 3650  -  total flux cleaned = -0.00115762 Jy
! Component: 3700  -  total flux cleaned = -0.00116522 Jy
! Component: 3750  -  total flux cleaned = -0.00115767 Jy
! Component: 3800  -  total flux cleaned = -0.00116771 Jy
! Component: 3850  -  total flux cleaned = -0.00118018 Jy
! Component: 3900  -  total flux cleaned = -0.00118267 Jy
! Component: 3950  -  total flux cleaned = -0.00118021 Jy
! Component: 4000  -  total flux cleaned = -0.00118756 Jy
! Component: 4050  -  total flux cleaned = -0.00120714 Jy
! Total flux subtracted in 4096 components = -0.00120227 Jy
! Clean residual min=-0.000146 max=0.000176 Jy/beam
! Clean residual mean=0.000000 rms=0.000045 Jy/beam
! Combined flux in latest and established models = 0.0332702 Jy
keep
! Adding 313 model components to the UV plane model.
! The established model now contains 500 components and 0.0332703 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "./J1810+1608_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.079 x 2.347 at -1.836 degrees (North through East)
! Clean map  min=-0.00026802  max=0.02527 Jy/beam
! Writing clean map to FITS file: ./J1810+1608_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.02527 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 4.45055e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.52836 0.52836 1.05672 2.11344 4.22688 8.45376 16.9075 33.8151 67.6301
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.025 
quit
! Quitting program
! Log file ./J1810+1608_X_uvs.log closed on Mon Oct 28 15:39:55 2013