! Started logfile: ./J1744-1726_X_uvs.log on Mon Oct 28 15:39:39 2013
obs J1744-1726_X_uvm.fits
! Reading UV FITS file: J1744-1726_X_uvm.fits
! AN table 1: 10 integrations on 21 of 21 possible baselines.
! AN table 2: 22 integrations on 28 of 28 possible baselines.
! AN table 3: 10 integrations on 28 of 28 possible baselines.
! AN table 4: 22 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.948367 visibilities/baseline/integration-bin.
! Found source: J1744-1726
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 14400 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet ./J1744-1726_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 7 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
!  A total of 4 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 2.
!  A total of 7 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
!  A total of 4 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 3.
!  A total of 7 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
!  A total of 4 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 4.
!  A total of 7 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
!  A total of 4 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 5.
!  A total of 7 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
!  A total of 4 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 6.
!  A total of 7 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
!  A total of 4 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 7.
!  A total of 7 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
!  A total of 4 telescope corrections were flagged in sub-array 4.
! 
! Correcting IF 8.
!  A total of 7 telescope corrections were flagged in sub-array 2.
!  A total of 1 telescope corrections were flagged in sub-array 3.
!  A total of 4 telescope corrections were flagged in sub-array 4.
! 
! Fit before self-cal, rms=1.000272Jy  sigma=0.832641
! Fit after  self-cal, rms=0.989889Jy  sigma=0.817868
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7409 mas, bmaj=2.248 mas, bpa=-8.096 degrees
! Estimated noise=15.093 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0102523 Jy
! Component: 100  -  total flux cleaned = 0.0128241 Jy
! Total flux subtracted in 100 components = 0.0128241 Jy
! Clean residual min=-0.001158 max=0.001289 Jy/beam
! Clean residual mean=0.000000 rms=0.000286 Jy/beam
! Combined flux in latest and established models = 0.0128241 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0128241 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020535Jy  sigma=0.018174
! Fit after  self-cal, rms=0.018523Jy  sigma=0.016563
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00326146 Jy
! Component: 100  -  total flux cleaned = 0.00445451 Jy
! Total flux subtracted in 100 components = 0.00445451 Jy
! Clean residual min=-0.001141 max=0.001057 Jy/beam
! Clean residual mean=0.000000 rms=0.000256 Jy/beam
! Combined flux in latest and established models = 0.0172786 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 29 components and 0.0172786 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018675Jy  sigma=0.015441
! Fit after  self-cal, rms=0.018671Jy  sigma=0.015438
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9818 mas, bmaj=2.785 mas, bpa=-8.338 degrees
! Estimated noise=7.95584 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00101752 Jy
! Component: 100  -  total flux cleaned = 0.00141784 Jy
! Component: 150  -  total flux cleaned = 0.00158955 Jy
! Component: 200  -  total flux cleaned = 0.00158014 Jy
! Total flux subtracted in 200 components = 0.00158014 Jy
! Clean residual min=-0.000576 max=0.000654 Jy/beam
! Clean residual mean=0.000000 rms=0.000153 Jy/beam
! Combined flux in latest and established models = 0.0188587 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 42 components and 0.0188587 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018851Jy  sigma=0.015231
! Fit after  self-cal, rms=0.018850Jy  sigma=0.015230
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     HN        0.73     KP        0.91     LA        1.15     
!   NL        0.80     OV        0.90     PT        0.88     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.89     HN        0.70     KP        0.96     LA        1.02     
!   MK        0.81     NL        1.08     OV        0.94     PT        0.85     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.88     HN        0.81     KP        0.79     LA        1.35     
!   NL        1.28     OV        0.97     PT        1.11     SC        0.90     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.03     HN        0.76     KP        0.94     LA        1.06     
!   MK        0.98     NL        1.13     OV        1.11     PT        1.03     
!   SC        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     HN        0.84     KP        1.00     LA        0.83     
!   NL        0.90     OV        1.11     PT        0.89     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.95     HN        0.70     KP        0.91     LA        0.81     
!   MK        0.98     NL        0.89     OV        0.93     PT        0.86     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.11     HN        0.72     KP        0.75     LA        1.07     
!   NL        1.03     OV        0.91     PT        0.82     SC        0.76     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.03     HN        0.90     KP        0.93     LA        0.98     
!   MK        0.92     NL        1.05     OV        0.95     PT        0.93     
!   SC        0.93     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.63     HN        0.82     KP        0.93     LA        0.73     
!   NL        1.32     OV        0.92     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     HN        1.02     KP        0.95     LA        0.80     
!   MK        0.89     NL        0.94     OV        1.02     PT        0.90     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.86     HN        0.81     KP        0.89     LA        0.91     
!   NL        0.93     OV        1.14     PT        0.80     SC        1.12     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.85     HN        0.83     KP        1.02     LA        1.02     
!   MK        1.09     NL        1.03     OV        0.84     PT        1.03     
!   SC        0.77     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.74     HN        0.84     KP        0.93     LA        0.91     
!   NL        1.09     OV        0.86     PT        0.81     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.78     HN        0.75     KP        0.86     LA        0.86     
!   MK        1.03     NL        0.97     OV        0.97     PT        0.95     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.87     HN        1.10     KP        0.83     LA        0.91     
!   NL        0.73     OV        1.09     PT        0.87     SC        0.88     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.92     HN        0.91     KP        1.00     LA        1.06     
!   MK        0.91     NL        0.93     OV        0.96     PT        0.97     
!   SC        1.01     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.79     HN        0.86     KP        0.98     LA        0.88     
!   NL        0.86     OV        0.83     PT        0.81     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.82     HN        0.90     KP        0.87     LA        1.03     
!   MK        1.02     NL        0.94     OV        0.90     PT        0.81     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.67     HN        0.83     KP        0.81     LA        1.13     
!   NL        0.86     OV        1.02     PT        0.78     SC        0.81     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.82     HN        0.87     KP        1.33     LA        0.88     
!   MK        0.84     NL        1.07     OV        0.88     PT        1.03     
!   SC        0.98     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     HN        1.00     KP        0.92     LA        0.98     
!   NL        0.77     OV        0.97     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.05     HN        0.81     KP        0.87     LA        0.95     
!   MK        0.91     NL        0.96     OV        0.84     PT        1.10     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.86     HN        0.98     KP        1.17     LA        1.08     
!   NL        0.76     OV        1.02     PT        0.81     SC        0.91     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        0.90     HN        0.89     KP        0.99     LA        1.04     
!   MK        0.87     NL        0.93     OV        1.06     PT        0.95     
!   SC        0.88     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.75     HN        0.90     KP        0.92     LA        0.83     
!   NL        0.87     OV        1.11     PT        0.81     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.84     HN        0.76     KP        0.82     LA        0.97     
!   MK        0.89     NL        0.92     OV        1.05     PT        0.80     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.71     HN        0.95     KP        0.86     LA        0.90     
!   NL        0.91     OV        0.98     PT        1.15     SC        0.75     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.10     HN        0.87     KP        1.04     LA        0.81     
!   MK        0.92     NL        0.97     OV        0.95     PT        0.83     
!   SC        0.90     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     HN        0.83     KP        1.37     LA        0.69     
!   NL        0.89     OV        1.00     PT        0.81     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     HN        0.80     KP        1.05     LA        0.79     
!   MK        0.97     NL        0.98     OV        1.04     PT        0.86     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.78     HN        0.83     KP        0.94     LA        1.03     
!   NL        0.90     OV        1.17     PT        0.99     SC        0.81     
! 
!  Telescope amplitude corrections in sub-array 4:
!   BR        1.28     HN        0.90     KP        1.06     LA        0.85     
!   MK        1.00     NL        1.03     OV        1.02     PT        0.94     
!   SC        0.82     
! 
! 
! Fit before self-cal, rms=0.018850Jy  sigma=0.015230
! Fit after  self-cal, rms=0.016571Jy  sigma=0.014682
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9773 mas, bmaj=2.794 mas, bpa=-8.109 degrees
! Estimated noise=6.70855 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00209934 Jy
! Component: 100  -  total flux cleaned = -0.00258784 Jy
! Component: 150  -  total flux cleaned = -0.00274482 Jy
! Component: 200  -  total flux cleaned = -0.00274976 Jy
! Total flux subtracted in 200 components = -0.00274976 Jy
! Clean residual min=-0.000471 max=0.000409 Jy/beam
! Clean residual mean=0.000000 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.016109 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 52 components and 0.016109 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015832Jy  sigma=0.014916
! Fit after  self-cal, rms=0.015882Jy  sigma=0.014899
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015882Jy  sigma=0.014899
! Fit after  self-cal, rms=0.014200Jy  sigma=0.014585
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9747 mas, bmaj=2.78 mas, bpa=-8.115 degrees
! Estimated noise=5.73926 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00171657 Jy
! Component: 100  -  total flux cleaned = -0.00211168 Jy
! Component: 150  -  total flux cleaned = -0.00225187 Jy
! Component: 200  -  total flux cleaned = -0.0022649 Jy
! Total flux subtracted in 200 components = -0.0022649 Jy
! Clean residual min=-0.000396 max=0.000394 Jy/beam
! Clean residual mean=0.000000 rms=0.000089 Jy/beam
! Combined flux in latest and established models = 0.0138441 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 54 components and 0.0138441 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013603Jy  sigma=0.014826
! Fit after  self-cal, rms=0.013605Jy  sigma=0.014817
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.0157e-05 Jy
! Component: 100  -  total flux cleaned = -7.69621e-06 Jy
! Component: 150  -  total flux cleaned = -3.16102e-06 Jy
! Component: 200  -  total flux cleaned = 9.14845e-07 Jy
! Total flux subtracted in 200 components = 9.14845e-07 Jy
! Clean residual min=-0.000405 max=0.000386 Jy/beam
! Clean residual mean=0.000000 rms=0.000090 Jy/beam
! Combined flux in latest and established models = 0.013845 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 56 components and 0.013845 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013601Jy  sigma=0.014820
! Fit after  self-cal, rms=0.013603Jy  sigma=0.014819
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013603Jy  sigma=0.014819
! Fit after  self-cal, rms=0.012285Jy  sigma=0.014562
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9726 mas, bmaj=2.756 mas, bpa=-7.804 degrees
! Estimated noise=4.90956 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0014322 Jy
! Component: 100  -  total flux cleaned = -0.00176486 Jy
! Component: 150  -  total flux cleaned = -0.00188289 Jy
! Component: 200  -  total flux cleaned = -0.00190134 Jy
! Total flux subtracted in 200 components = -0.00190134 Jy
! Clean residual min=-0.000381 max=0.000292 Jy/beam
! Clean residual mean=0.000000 rms=0.000080 Jy/beam
! Combined flux in latest and established models = 0.0119437 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 62 components and 0.0119437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011801Jy  sigma=0.014796
! Fit after  self-cal, rms=0.011809Jy  sigma=0.014794
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.0138e-05 Jy
! Component: 100  -  total flux cleaned = -2.01371e-05 Jy
! Component: 150  -  total flux cleaned = -1.86531e-05 Jy
! Component: 200  -  total flux cleaned = -1.58571e-05 Jy
! Total flux subtracted in 200 components = -1.58571e-05 Jy
! Clean residual min=-0.000381 max=0.000298 Jy/beam
! Clean residual mean=0.000000 rms=0.000080 Jy/beam
! Combined flux in latest and established models = 0.0119278 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 63 components and 0.0119278 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011804Jy  sigma=0.014798
! Fit after  self-cal, rms=0.011805Jy  sigma=0.014798
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011805Jy  sigma=0.014798
! Fit after  self-cal, rms=0.010541Jy  sigma=0.014558
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.104 mas, bmaj=4.702 mas, bpa=-4.198 degrees
! Estimated noise=5.22125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00127718 Jy
! Component: 100  -  total flux cleaned = -0.00155662 Jy
! Component: 150  -  total flux cleaned = -0.00158726 Jy
! Component: 200  -  total flux cleaned = -0.00158536 Jy
! Total flux subtracted in 200 components = -0.00158536 Jy
! Clean residual min=-0.000397 max=0.000350 Jy/beam
! Clean residual mean=0.000001 rms=0.000102 Jy/beam
! Combined flux in latest and established models = 0.0103424 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 63 components and 0.0103424 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010119Jy  sigma=0.014812
! Fit after  self-cal, rms=0.010119Jy  sigma=0.014811
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.17861e-05 Jy
! Component: 100  -  total flux cleaned = 1.83442e-05 Jy
! Component: 150  -  total flux cleaned = 2.2042e-05 Jy
! Component: 200  -  total flux cleaned = 2.87522e-05 Jy
! Total flux subtracted in 200 components = 2.87522e-05 Jy
! Clean residual min=-0.000395 max=0.000352 Jy/beam
! Clean residual mean=0.000001 rms=0.000101 Jy/beam
! Combined flux in latest and established models = 0.0103712 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 69 components and 0.0103712 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010118Jy  sigma=0.014813
! Fit after  self-cal, rms=0.010118Jy  sigma=0.014813
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.97 mas, bmaj=2.734 mas, bpa=-7.526 degrees
! Estimated noise=4.19763 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.97 x 2.734 at -7.526 degrees (North through East)
! Clean map  min=-0.00030573  max=0.0088446 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7347 mas, bmaj=2.233 mas, bpa=-7.34 degrees
! Estimated noise=7.88321 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00655452 Jy
! Component: 100  -  total flux cleaned = 0.008259 Jy
! Component: 150  -  total flux cleaned = 0.00905162 Jy
! Component: 200  -  total flux cleaned = 0.00953148 Jy
! Total flux subtracted in 200 components = 0.00953148 Jy
! Clean residual min=-0.000548 max=0.000524 Jy/beam
! Clean residual mean=-0.000000 rms=0.000129 Jy/beam
! Combined flux in latest and established models = 0.00953147 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.00953147 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.97 mas, bmaj=2.734 mas, bpa=-7.526 degrees
! Estimated noise=4.19763 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000477348 Jy
! Component: 100  -  total flux cleaned = 0.000683517 Jy
! Component: 150  -  total flux cleaned = 0.000771378 Jy
! Component: 200  -  total flux cleaned = 0.000779634 Jy
! Total flux subtracted in 200 components = 0.000779634 Jy
! Clean residual min=-0.000324 max=0.000265 Jy/beam
! Clean residual mean=0.000000 rms=0.000069 Jy/beam
! Combined flux in latest and established models = 0.0103111 Jy
! Adding 16 model components to the UV plane model.
! The established model now contains 36 components and 0.0103111 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.104 mas, bmaj=4.702 mas, bpa=-4.198 degrees
! Estimated noise=5.22125 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.17347e-05 Jy
! Component: 100  -  total flux cleaned = 8.81388e-05 Jy
! Component: 150  -  total flux cleaned = 9.17877e-05 Jy
! Component: 200  -  total flux cleaned = 9.35252e-05 Jy
! Total flux subtracted in 200 components = 9.35252e-05 Jy
! Clean residual min=-0.000393 max=0.000356 Jy/beam
! Clean residual mean=0.000001 rms=0.000101 Jy/beam
! Combined flux in latest and established models = 0.0104046 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.08135e-06 Jy
! Component: 100  -  total flux cleaned = 7.19424e-06 Jy
! Component: 150  -  total flux cleaned = 1.10746e-05 Jy
! Component: 200  -  total flux cleaned = 1.35993e-05 Jy
! Total flux subtracted in 200 components = 1.35993e-05 Jy
! Clean residual min=-0.000393 max=0.000356 Jy/beam
! Clean residual mean=0.000001 rms=0.000101 Jy/beam
! Combined flux in latest and established models = 0.0104182 Jy
! Adding 11 model components to the UV plane model.
! The established model now contains 45 components and 0.0104182 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.97 mas, bmaj=2.734 mas, bpa=-7.526 degrees
! Estimated noise=4.19763 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.24191e-05 Jy
! Component: 100  -  total flux cleaned = -4.21323e-05 Jy
! Component: 150  -  total flux cleaned = -4.84817e-05 Jy
! Component: 200  -  total flux cleaned = -5.4106e-05 Jy
! Total flux subtracted in 200 components = -5.4106e-05 Jy
! Clean residual min=-0.000325 max=0.000265 Jy/beam
! Clean residual mean=0.000000 rms=0.000069 Jy/beam
! Combined flux in latest and established models = 0.0103641 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 51 components and 0.0103641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.010122Jy  sigma=0.014810
! Fit after  self-cal, rms=0.010122Jy  sigma=0.014809
wmodel ./J1744-1726_X_map.mod
! Writing 51 model components to file: ./J1744-1726_X_map.mod
wobs ./J1744-1726_X_uvs.fits
! Writing UV FITS file: ./J1744-1726_X_uvs.fits
wwins ./J1744-1726_X_map.win
! wwins: Wrote 1 windows to ./J1744-1726_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000100377 Jy
! Component: 100  -  total flux cleaned = -0.000115019 Jy
! Component: 150  -  total flux cleaned = -0.000115055 Jy
! Component: 200  -  total flux cleaned = -0.000115115 Jy
! Component: 250  -  total flux cleaned = -0.000110891 Jy
! Component: 300  -  total flux cleaned = -0.00011082 Jy
! Component: 350  -  total flux cleaned = -0.000106761 Jy
! Component: 400  -  total flux cleaned = -0.000114527 Jy
! Component: 450  -  total flux cleaned = -0.000110669 Jy
! Component: 500  -  total flux cleaned = -0.000110622 Jy
! Component: 550  -  total flux cleaned = -9.94721e-05 Jy
! Component: 600  -  total flux cleaned = -9.21156e-05 Jy
! Component: 650  -  total flux cleaned = -8.13231e-05 Jy
! Component: 700  -  total flux cleaned = -7.4259e-05 Jy
! Component: 750  -  total flux cleaned = -7.08433e-05 Jy
! Component: 800  -  total flux cleaned = -7.78099e-05 Jy
! Component: 850  -  total flux cleaned = -6.75845e-05 Jy
! Component: 900  -  total flux cleaned = -8.10628e-05 Jy
! Component: 950  -  total flux cleaned = -7.10858e-05 Jy
! Component: 1000  -  total flux cleaned = -8.43135e-05 Jy
! Component: 1050  -  total flux cleaned = -7.78008e-05 Jy
! Component: 1100  -  total flux cleaned = -8.75069e-05 Jy
! Component: 1150  -  total flux cleaned = -9.07066e-05 Jy
! Component: 1200  -  total flux cleaned = -8.75296e-05 Jy
! Component: 1250  -  total flux cleaned = -8.43853e-05 Jy
! Component: 1300  -  total flux cleaned = -9.05296e-05 Jy
! Component: 1350  -  total flux cleaned = -8.13047e-05 Jy
! Component: 1400  -  total flux cleaned = -8.1351e-05 Jy
! Component: 1450  -  total flux cleaned = -8.43483e-05 Jy
! Component: 1500  -  total flux cleaned = -8.43538e-05 Jy
! Component: 1550  -  total flux cleaned = -8.14025e-05 Jy
! Component: 1600  -  total flux cleaned = -9.02292e-05 Jy
! Component: 1650  -  total flux cleaned = -8.44155e-05 Jy
! Component: 1700  -  total flux cleaned = -8.44946e-05 Jy
! Component: 1750  -  total flux cleaned = -9.02193e-05 Jy
! Component: 1800  -  total flux cleaned = -9.59155e-05 Jy
! Component: 1850  -  total flux cleaned = -9.02811e-05 Jy
! Component: 1900  -  total flux cleaned = -9.8702e-05 Jy
! Component: 1950  -  total flux cleaned = -9.86927e-05 Jy
! Component: 2000  -  total flux cleaned = -0.00010147 Jy
! Component: 2050  -  total flux cleaned = -0.000106937 Jy
! Component: 2100  -  total flux cleaned = -0.000104287 Jy
! Component: 2150  -  total flux cleaned = -0.000120407 Jy
! Component: 2200  -  total flux cleaned = -0.000115088 Jy
! Component: 2250  -  total flux cleaned = -0.000123039 Jy
! Component: 2300  -  total flux cleaned = -0.000125676 Jy
! Component: 2350  -  total flux cleaned = -0.000133506 Jy
! Component: 2400  -  total flux cleaned = -0.000130922 Jy
! Component: 2450  -  total flux cleaned = -0.000138655 Jy
! Component: 2500  -  total flux cleaned = -0.000130991 Jy
! Component: 2550  -  total flux cleaned = -0.000138636 Jy
! Component: 2600  -  total flux cleaned = -0.00014871 Jy
! Component: 2650  -  total flux cleaned = -0.000158722 Jy
! Component: 2700  -  total flux cleaned = -0.000156238 Jy
! Component: 2750  -  total flux cleaned = -0.000163658 Jy
! Component: 2800  -  total flux cleaned = -0.000158724 Jy
! Component: 2850  -  total flux cleaned = -0.000170931 Jy
! Component: 2900  -  total flux cleaned = -0.000170926 Jy
! Component: 2950  -  total flux cleaned = -0.000178153 Jy
! Component: 3000  -  total flux cleaned = -0.000180559 Jy
! Component: 3050  -  total flux cleaned = -0.000180571 Jy
! Component: 3100  -  total flux cleaned = -0.000187669 Jy
! Component: 3150  -  total flux cleaned = -0.000192375 Jy
! Component: 3200  -  total flux cleaned = -0.000194728 Jy
! Component: 3250  -  total flux cleaned = -0.000194704 Jy
! Component: 3300  -  total flux cleaned = -0.000197022 Jy
! Component: 3350  -  total flux cleaned = -0.000199344 Jy
! Component: 3400  -  total flux cleaned = -0.000199334 Jy
! Component: 3450  -  total flux cleaned = -0.000213009 Jy
! Component: 3500  -  total flux cleaned = -0.000217527 Jy
! Component: 3550  -  total flux cleaned = -0.000219768 Jy
! Component: 3600  -  total flux cleaned = -0.000206311 Jy
! Component: 3650  -  total flux cleaned = -0.000208554 Jy
! Component: 3700  -  total flux cleaned = -0.000219676 Jy
! Component: 3750  -  total flux cleaned = -0.000224073 Jy
! Component: 3800  -  total flux cleaned = -0.000228485 Jy
! Component: 3850  -  total flux cleaned = -0.000226292 Jy
! Component: 3900  -  total flux cleaned = -0.000235001 Jy
! Component: 3950  -  total flux cleaned = -0.000230688 Jy
! Component: 4000  -  total flux cleaned = -0.000230691 Jy
! Component: 4050  -  total flux cleaned = -0.00024352 Jy
! Total flux subtracted in 4096 components = -0.000249904 Jy
! Clean residual min=-0.000115 max=0.000111 Jy/beam
! Clean residual mean=0.000000 rms=0.000041 Jy/beam
! Combined flux in latest and established models = 0.0101142 Jy
keep
! Adding 346 model components to the UV plane model.
! The established model now contains 397 components and 0.0101142 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "./J1744-1726_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.97 x 2.734 at -7.526 degrees (North through East)
! Clean map  min=-0.00026403  max=0.008791 Jy/beam
! Writing clean map to FITS file: ./J1744-1726_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.00879105 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 4.0429e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.37966 1.37966 2.75933 5.51866 11.0373 22.0746 44.1493 88.2985
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.008 
quit
! Quitting program
! Log file ./J1744-1726_X_uvs.log closed on Mon Oct 28 15:39:53 2013