! Started logfile: ./J1624+1110_X_uvs.log on Mon Oct 28 15:39:27 2013
obs J1624+1110_X_uva.fits
! Reading UV FITS file: J1624+1110_X_uva.fits
! AN table 1: 14 integrations on 36 of 36 possible baselines.
! AN table 2: 11 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.930931 visibilities/baseline/integration-bin.
! Found source: J1624+1110
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 7440 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet ./J1624+1110_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 5 telescope corrections were flagged in sub-array 1.
!  A total of 4 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.000043Jy  sigma=1.518521
! Fit after  self-cal, rms=0.968431Jy  sigma=1.454087
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8938 mas, bmaj=2.036 mas, bpa=-1.166 degrees
! Estimated noise=11.1054 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0279615 Jy
! Component: 100  -  total flux cleaned = 0.0372202 Jy
! Total flux subtracted in 100 components = 0.0372202 Jy
! Clean residual min=-0.002461 max=0.004385 Jy/beam
! Clean residual mean=-0.000001 rms=0.000666 Jy/beam
! Combined flux in latest and established models = 0.0372201 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0372201 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.021005Jy  sigma=0.033795
! Fit after  self-cal, rms=0.019410Jy  sigma=0.032065
! Inverting map 
! Added new window around map position (-0.8, 2.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00513311 Jy
! Component: 100  -  total flux cleaned = 0.00812898 Jy
! Total flux subtracted in 100 components = 0.00812898 Jy
! Clean residual min=-0.001874 max=0.002751 Jy/beam
! Clean residual mean=-0.000001 rms=0.000481 Jy/beam
! Combined flux in latest and established models = 0.0453491 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 34 components and 0.0453491 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018851Jy  sigma=0.028146
! Fit after  self-cal, rms=0.018851Jy  sigma=0.028121
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.201 mas, bmaj=2.533 mas, bpa=-2.202 degrees
! Estimated noise=6.00946 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00231096 Jy
! Component: 100  -  total flux cleaned = 0.0035402 Jy
! Component: 150  -  total flux cleaned = 0.00424396 Jy
! Component: 200  -  total flux cleaned = 0.00462849 Jy
! Total flux subtracted in 200 components = 0.00462849 Jy
! Clean residual min=-0.001695 max=0.003207 Jy/beam
! Clean residual mean=-0.000000 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.0499776 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 50 components and 0.0499776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018966Jy  sigma=0.027073
! Fit after  self-cal, rms=0.018971Jy  sigma=0.027065
! Inverting map 
! Added new window around map position (-2.6, -8.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00275358 Jy
! Component: 100  -  total flux cleaned = 0.00391145 Jy
! Component: 150  -  total flux cleaned = 0.00447566 Jy
! Component: 200  -  total flux cleaned = 0.00492811 Jy
! Total flux subtracted in 200 components = 0.00492811 Jy
! Clean residual min=-0.001540 max=0.001294 Jy/beam
! Clean residual mean=-0.000002 rms=0.000337 Jy/beam
! Combined flux in latest and established models = 0.0549057 Jy
! Performing phase self-cal
! Adding 43 model components to the UV plane model.
! The established model now contains 89 components and 0.0549057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018598Jy  sigma=0.026395
! Fit after  self-cal, rms=0.018542Jy  sigma=0.026311
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.10     HN        0.97     KP        0.98     
!   LA        0.99     NL        1.06     OV        0.99     PT        0.87     
!   SC        0.84     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.98     FD        1.12     HN        0.89     KP        0.95     
!   LA        1.01     MK        1.00     NL        0.90     OV        0.95     
!   PT        0.96     SC        1.00     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.03     HN        0.91     KP        0.94     
!   LA        0.95     NL        0.98     OV        0.98     PT        0.89     
!   SC        0.84     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.14     FD        1.02     HN        0.90     KP        0.95     
!   LA        0.92     MK        1.00     NL        0.95     OV        0.87     
!   PT        0.87     SC        0.97     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.80     FD        1.11     HN        0.94     KP        1.05     
!   LA        0.94     NL        1.04     OV        1.01     PT        0.87     
!   SC        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.80     FD        1.12     HN        0.93     KP        1.05     
!   LA        0.91     MK        1.02     NL        1.03     OV        1.04     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.09     HN        1.04     KP        0.97     
!   LA        0.98     NL        0.96     OV        0.95     PT        0.94     
!   SC        0.89     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     FD        1.07     HN        1.00     KP        0.91     
!   LA        0.93     MK        1.13     NL        0.99     OV        0.89     
!   PT        0.98     SC        0.93     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.77     FD        1.06     HN        0.95     KP        1.12     
!   LA        0.93     NL        0.97     OV        0.92     PT        0.89     
!   SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.91     FD        1.01     HN        0.94     KP        1.04     
!   LA        0.96     MK        1.09     NL        0.91     OV        0.98     
!   PT        0.95     SC        0.90     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        1.04     HN        1.05     KP        1.13     
!   LA        1.01     NL        1.01     OV        1.04     PT        0.90     
!   SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.83     FD        1.01     HN        1.09     KP        1.06     
!   LA        1.02     MK        1.05     NL        0.90     OV        1.20     
!   PT        0.93     SC        1.01     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        1.04     HN        1.08     KP        1.01     
!   LA        0.95     NL        1.09     OV        1.01     PT        0.88     
!   SC        0.92     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     FD        1.12     HN        0.99     KP        1.01     
!   LA        1.02     MK        1.00     NL        0.94     OV        0.95     
!   PT        0.83     SC        0.97     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        0.99     KP        1.12     
!   LA        0.91     NL        0.97     OV        0.98     PT        0.88     
!   SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.26     FD        1.05     HN        1.06     KP        1.07     
!   LA        0.84     MK        0.92     NL        0.83     OV        0.98     
!   PT        0.90     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.018542Jy  sigma=0.026311
! Fit after  self-cal, rms=0.017737Jy  sigma=0.024943
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.212 mas, bmaj=2.505 mas, bpa=-1.692 degrees
! Estimated noise=5.6717 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0017159 Jy
! Component: 100  -  total flux cleaned = -0.00163071 Jy
! Component: 150  -  total flux cleaned = -0.00152552 Jy
! Component: 200  -  total flux cleaned = -0.00151335 Jy
! Total flux subtracted in 200 components = -0.00151335 Jy
! Clean residual min=-0.000693 max=0.000623 Jy/beam
! Clean residual mean=-0.000002 rms=0.000149 Jy/beam
! Combined flux in latest and established models = 0.0533924 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 99 components and 0.0533924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017175Jy  sigma=0.025137
! Fit after  self-cal, rms=0.017200Jy  sigma=0.025124
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.017200Jy  sigma=0.025124
! Fit after  self-cal, rms=0.016736Jy  sigma=0.024900
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.208 mas, bmaj=2.485 mas, bpa=-1.361 degrees
! Estimated noise=5.37313 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00162352 Jy
! Component: 100  -  total flux cleaned = -0.00199826 Jy
! Component: 150  -  total flux cleaned = -0.00208211 Jy
! Component: 200  -  total flux cleaned = -0.00206204 Jy
! Total flux subtracted in 200 components = -0.00206204 Jy
! Clean residual min=-0.000627 max=0.000606 Jy/beam
! Clean residual mean=-0.000001 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.0513303 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 108 components and 0.0513303 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016236Jy  sigma=0.025119
! Fit after  self-cal, rms=0.016236Jy  sigma=0.025117
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.50249e-06 Jy
! Component: 100  -  total flux cleaned = 6.14751e-06 Jy
! Component: 150  -  total flux cleaned = 3.0448e-05 Jy
! Component: 200  -  total flux cleaned = 5.34638e-05 Jy
! Total flux subtracted in 200 components = 5.34638e-05 Jy
! Clean residual min=-0.000606 max=0.000598 Jy/beam
! Clean residual mean=-0.000001 rms=0.000138 Jy/beam
! Combined flux in latest and established models = 0.0513838 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 116 components and 0.0513838 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016217Jy  sigma=0.025118
! Fit after  self-cal, rms=0.016216Jy  sigma=0.025117
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016216Jy  sigma=0.025117
! Fit after  self-cal, rms=0.015770Jy  sigma=0.024883
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.204 mas, bmaj=2.468 mas, bpa=-1.103 degrees
! Estimated noise=5.0862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00150016 Jy
! Component: 100  -  total flux cleaned = -0.0019281 Jy
! Component: 150  -  total flux cleaned = -0.00214431 Jy
! Component: 200  -  total flux cleaned = -0.00216919 Jy
! Total flux subtracted in 200 components = -0.00216919 Jy
! Clean residual min=-0.000558 max=0.000570 Jy/beam
! Clean residual mean=-0.000001 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.0492146 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 122 components and 0.0492146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015318Jy  sigma=0.025106
! Fit after  self-cal, rms=0.015317Jy  sigma=0.025106
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-14.6, -19.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00043125 Jy
! Component: 100  -  total flux cleaned = 0.000431124 Jy
! Component: 150  -  total flux cleaned = 0.000450376 Jy
! Component: 200  -  total flux cleaned = 0.000492823 Jy
! Total flux subtracted in 200 components = 0.000492823 Jy
! Clean residual min=-0.000567 max=0.000536 Jy/beam
! Clean residual mean=-0.000001 rms=0.000125 Jy/beam
! Combined flux in latest and established models = 0.0497074 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 137 components and 0.0497074 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015291Jy  sigma=0.025077
! Fit after  self-cal, rms=0.015290Jy  sigma=0.025074
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015290Jy  sigma=0.025074
! Fit after  self-cal, rms=0.014885Jy  sigma=0.024841
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.385 mas, bmaj=3.703 mas, bpa=-11.14 degrees
! Estimated noise=5.32297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00134823 Jy
! Component: 100  -  total flux cleaned = -0.00162182 Jy
! Component: 150  -  total flux cleaned = -0.00167683 Jy
! Component: 200  -  total flux cleaned = -0.0016975 Jy
! Total flux subtracted in 200 components = -0.0016975 Jy
! Clean residual min=-0.000514 max=0.000499 Jy/beam
! Clean residual mean=-0.000001 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.0480099 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 158 components and 0.0480099 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014485Jy  sigma=0.025042
! Fit after  self-cal, rms=0.014486Jy  sigma=0.025040
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.94319e-05 Jy
! Component: 100  -  total flux cleaned = 8.49114e-06 Jy
! Component: 150  -  total flux cleaned = 8.73384e-06 Jy
! Component: 200  -  total flux cleaned = 4.30534e-06 Jy
! Total flux subtracted in 200 components = 4.30534e-06 Jy
! Clean residual min=-0.000520 max=0.000502 Jy/beam
! Clean residual mean=-0.000001 rms=0.000131 Jy/beam
! Combined flux in latest and established models = 0.0480142 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 171 components and 0.0480142 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014467Jy  sigma=0.025059
! Fit after  self-cal, rms=0.014466Jy  sigma=0.025059
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.201 mas, bmaj=2.452 mas, bpa=-0.8835 degrees
! Estimated noise=4.82022 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.201 x 2.452 at -0.8835 degrees (North through East)
! Clean map  min=-0.00053139  max=0.025697 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9011 mas, bmaj=1.975 mas, bpa=0.3452 degrees
! Estimated noise=8.74901 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0226159 Jy
! Component: 100  -  total flux cleaned = 0.0303782 Jy
! Component: 150  -  total flux cleaned = 0.0342498 Jy
! Component: 200  -  total flux cleaned = 0.0368144 Jy
! Total flux subtracted in 200 components = 0.0368144 Jy
! Clean residual min=-0.001381 max=0.001951 Jy/beam
! Clean residual mean=-0.000001 rms=0.000324 Jy/beam
! Combined flux in latest and established models = 0.0368144 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 38 model components to the UV plane model.
! The established model now contains 38 components and 0.0368144 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.201 mas, bmaj=2.452 mas, bpa=-0.8835 degrees
! Estimated noise=4.82022 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.4, -2.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00269692 Jy
! Component: 100  -  total flux cleaned = 0.00445353 Jy
! Component: 150  -  total flux cleaned = 0.00570978 Jy
! Component: 200  -  total flux cleaned = 0.00667763 Jy
! Total flux subtracted in 200 components = 0.00667763 Jy
! Clean residual min=-0.000719 max=0.000743 Jy/beam
! Clean residual mean=-0.000002 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.043492 Jy
! Adding 64 model components to the UV plane model.
! The established model now contains 92 components and 0.043492 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.385 mas, bmaj=3.703 mas, bpa=-11.14 degrees
! Estimated noise=5.32297 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00106675 Jy
! Component: 100  -  total flux cleaned = 0.00184524 Jy
! Component: 150  -  total flux cleaned = 0.00245665 Jy
! Component: 200  -  total flux cleaned = 0.00294574 Jy
! Total flux subtracted in 200 components = 0.00294574 Jy
! Clean residual min=-0.000519 max=0.000696 Jy/beam
! Clean residual mean=-0.000002 rms=0.000161 Jy/beam
! Combined flux in latest and established models = 0.0464378 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-21, 22.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000632028 Jy
! Component: 100  -  total flux cleaned = 0.00101816 Jy
! Component: 150  -  total flux cleaned = 0.00133217 Jy
! Component: 200  -  total flux cleaned = 0.00159562 Jy
! Total flux subtracted in 200 components = 0.00159562 Jy
! Clean residual min=-0.000460 max=0.000489 Jy/beam
! Clean residual mean=-0.000000 rms=0.000117 Jy/beam
! Combined flux in latest and established models = 0.0480334 Jy
! Adding 92 model components to the UV plane model.
! The established model now contains 175 components and 0.0480334 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.201 mas, bmaj=2.452 mas, bpa=-0.8835 degrees
! Estimated noise=4.82022 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0001913 Jy
! Component: 100  -  total flux cleaned = 0.000308543 Jy
! Component: 150  -  total flux cleaned = 0.000362055 Jy
! Component: 200  -  total flux cleaned = 0.000382828 Jy
! Total flux subtracted in 200 components = 0.000382828 Jy
! Clean residual min=-0.000486 max=0.000486 Jy/beam
! Clean residual mean=-0.000000 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.0484162 Jy
selfcal
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 204 components and 0.0484162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014419Jy  sigma=0.025094
! Fit after  self-cal, rms=0.014409Jy  sigma=0.025076
wmodel ./J1624+1110_X_map.mod
! Writing 204 model components to file: ./J1624+1110_X_map.mod
wobs ./J1624+1110_X_uvs.fits
! Writing UV FITS file: ./J1624+1110_X_uvs.fits
wwins ./J1624+1110_X_map.win
! wwins: Wrote 6 windows to ./J1624+1110_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 4.73682e-05 Jy
! Component: 100  -  total flux cleaned = 1.75359e-05 Jy
! Component: 150  -  total flux cleaned = -2.5055e-05 Jy
! Component: 200  -  total flux cleaned = -7.3085e-05 Jy
! Component: 250  -  total flux cleaned = -0.000119756 Jy
! Component: 300  -  total flux cleaned = -0.00015212 Jy
! Component: 350  -  total flux cleaned = -0.000183578 Jy
! Component: 400  -  total flux cleaned = -0.000208141 Jy
! Component: 450  -  total flux cleaned = -0.000231996 Jy
! Component: 500  -  total flux cleaned = -0.000278693 Jy
! Component: 550  -  total flux cleaned = -0.000307338 Jy
! Component: 600  -  total flux cleaned = -0.000341237 Jy
! Component: 650  -  total flux cleaned = -0.000385597 Jy
! Component: 700  -  total flux cleaned = -0.000391073 Jy
! Component: 750  -  total flux cleaned = -0.000428746 Jy
! Component: 800  -  total flux cleaned = -0.000439307 Jy
! Component: 850  -  total flux cleaned = -0.000465411 Jy
! Component: 900  -  total flux cleaned = -0.000496204 Jy
! Component: 950  -  total flux cleaned = -0.000501277 Jy
! Component: 1000  -  total flux cleaned = -0.000521314 Jy
! Component: 1050  -  total flux cleaned = -0.000536197 Jy
! Component: 1100  -  total flux cleaned = -0.000541168 Jy
! Component: 1150  -  total flux cleaned = -0.000560589 Jy
! Component: 1200  -  total flux cleaned = -0.000574862 Jy
! Component: 1250  -  total flux cleaned = -0.00058419 Jy
! Component: 1300  -  total flux cleaned = -0.000588819 Jy
! Component: 1350  -  total flux cleaned = -0.000611767 Jy
! Component: 1400  -  total flux cleaned = -0.000611747 Jy
! Component: 1450  -  total flux cleaned = -0.000620767 Jy
! Component: 1500  -  total flux cleaned = -0.000625243 Jy
! Component: 1550  -  total flux cleaned = -0.000634126 Jy
! Component: 1600  -  total flux cleaned = -0.000642885 Jy
! Component: 1650  -  total flux cleaned = -0.000651563 Jy
! Component: 1700  -  total flux cleaned = -0.00066445 Jy
! Component: 1750  -  total flux cleaned = -0.000664437 Jy
! Component: 1800  -  total flux cleaned = -0.000660328 Jy
! Component: 1850  -  total flux cleaned = -0.000660324 Jy
! Component: 1900  -  total flux cleaned = -0.000643871 Jy
! Component: 1950  -  total flux cleaned = -0.00063577 Jy
! Component: 2000  -  total flux cleaned = -0.000639814 Jy
! Component: 2050  -  total flux cleaned = -0.000643846 Jy
! Component: 2100  -  total flux cleaned = -0.00064377 Jy
! Component: 2150  -  total flux cleaned = -0.000635871 Jy
! Component: 2200  -  total flux cleaned = -0.000631974 Jy
! Component: 2250  -  total flux cleaned = -0.000643637 Jy
! Component: 2300  -  total flux cleaned = -0.000628258 Jy
! Component: 2350  -  total flux cleaned = -0.000620636 Jy
! Component: 2400  -  total flux cleaned = -0.000609304 Jy
! Component: 2450  -  total flux cleaned = -0.000594274 Jy
! Component: 2500  -  total flux cleaned = -0.000586852 Jy
! Component: 2550  -  total flux cleaned = -0.000586904 Jy
! Component: 2600  -  total flux cleaned = -0.000590543 Jy
! Component: 2650  -  total flux cleaned = -0.000586979 Jy
! Component: 2700  -  total flux cleaned = -0.000583422 Jy
! Component: 2750  -  total flux cleaned = -0.00059061 Jy
! Component: 2800  -  total flux cleaned = -0.000594165 Jy
! Component: 2850  -  total flux cleaned = -0.000590632 Jy
! Component: 2900  -  total flux cleaned = -0.000604674 Jy
! Component: 2950  -  total flux cleaned = -0.000594226 Jy
! Component: 3000  -  total flux cleaned = -0.000611561 Jy
! Component: 3050  -  total flux cleaned = -0.000628779 Jy
! Component: 3100  -  total flux cleaned = -0.000621934 Jy
! Component: 3150  -  total flux cleaned = -0.000625343 Jy
! Component: 3200  -  total flux cleaned = -0.000635432 Jy
! Component: 3250  -  total flux cleaned = -0.000635402 Jy
! Component: 3300  -  total flux cleaned = -0.000645379 Jy
! Component: 3350  -  total flux cleaned = -0.000648675 Jy
! Component: 3400  -  total flux cleaned = -0.000661822 Jy
! Component: 3450  -  total flux cleaned = -0.000638941 Jy
! Component: 3500  -  total flux cleaned = -0.000651964 Jy
! Component: 3550  -  total flux cleaned = -0.000655186 Jy
! Component: 3600  -  total flux cleaned = -0.000677669 Jy
! Component: 3650  -  total flux cleaned = -0.000671253 Jy
! Component: 3700  -  total flux cleaned = -0.000674429 Jy
! Component: 3750  -  total flux cleaned = -0.000680745 Jy
! Component: 3800  -  total flux cleaned = -0.000683909 Jy
! Component: 3850  -  total flux cleaned = -0.00070268 Jy
! Component: 3900  -  total flux cleaned = -0.000696456 Jy
! Component: 3950  -  total flux cleaned = -0.000702679 Jy
! Component: 4000  -  total flux cleaned = -0.000711922 Jy
! Component: 4050  -  total flux cleaned = -0.000718075 Jy
! Total flux subtracted in 4096 components = -0.000721105 Jy
! Clean residual min=-0.000191 max=0.000213 Jy/beam
! Clean residual mean=0.000000 rms=0.000055 Jy/beam
! Combined flux in latest and established models = 0.0476951 Jy
keep
! Adding 293 model components to the UV plane model.
! The established model now contains 497 components and 0.0476951 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "./J1624+1110_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.201 x 2.452 at -0.8835 degrees (North through East)
! Clean map  min=-0.00033399  max=0.026028 Jy/beam
! Writing clean map to FITS file: ./J1624+1110_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0260279 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 5.4154e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.624184 0.624184 1.24837 2.49674 4.99348 9.98695 19.9739 39.9478 79.8956
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.026 
quit
! Quitting program
! Log file ./J1624+1110_X_uvs.log closed on Mon Oct 28 15:39:40 2013