! Started logfile: ./J0950+4553_X_uvs.log on Mon Oct 28 15:38:26 2013
obs J0950+4553_X_uva.fits
! Reading UV FITS file: J0950+4553_X_uva.fits
! AN table 1: 11 integrations on 45 of 45 possible baselines.
! AN table 2: 11 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.963885 visibilities/baseline/integration-bin.
! Found source: J0950+4553
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 6192 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet ./J0950+4553_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 3 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.001109Jy  sigma=1.358282
! Fit after  self-cal, rms=0.975834Jy  sigma=1.311212
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.686 mas, bmaj=1.996 mas, bpa=8.654 degrees
! Estimated noise=14.8417 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0211584 Jy
! Component: 100  -  total flux cleaned = 0.0259693 Jy
! Total flux subtracted in 100 components = 0.0259693 Jy
! Clean residual min=-0.001847 max=0.002446 Jy/beam
! Clean residual mean=0.000002 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.0259693 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.0259693 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.020008Jy  sigma=0.029765
! Fit after  self-cal, rms=0.016166Jy  sigma=0.025270
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00339411 Jy
! Component: 100  -  total flux cleaned = 0.00483637 Jy
! Total flux subtracted in 100 components = 0.00483637 Jy
! Clean residual min=-0.001599 max=0.002628 Jy/beam
! Clean residual mean=0.000001 rms=0.000389 Jy/beam
! Combined flux in latest and established models = 0.0308057 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0308057 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.016193Jy  sigma=0.022788
! Fit after  self-cal, rms=0.016197Jy  sigma=0.022786
! Inverting map 
! Added new window around map position (-4.2, 3.4).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00277071 Jy
! Component: 100  -  total flux cleaned = 0.00441847 Jy
! Total flux subtracted in 100 components = 0.00441847 Jy
! Clean residual min=-0.001324 max=0.001640 Jy/beam
! Clean residual mean=0.000001 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.0352242 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 26 components and 0.0352242 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.015351Jy  sigma=0.021155
! Fit after  self-cal, rms=0.015279Jy  sigma=0.021079
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9059 mas, bmaj=2.277 mas, bpa=6.892 degrees
! Estimated noise=7.25979 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00308495 Jy
! Component: 100  -  total flux cleaned = 0.00512543 Jy
! Component: 150  -  total flux cleaned = 0.00669168 Jy
! Component: 200  -  total flux cleaned = 0.00794919 Jy
! Total flux subtracted in 200 components = 0.00794919 Jy
! Clean residual min=-0.001305 max=0.002542 Jy/beam
! Clean residual mean=0.000001 rms=0.000444 Jy/beam
! Combined flux in latest and established models = 0.0431733 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 60 components and 0.0431733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014872Jy  sigma=0.019258
! Fit after  self-cal, rms=0.014810Jy  sigma=0.019149
! Inverting map 
! Added new window around map position (-2.8, 2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00235145 Jy
! Component: 100  -  total flux cleaned = 0.00364528 Jy
! Component: 150  -  total flux cleaned = 0.00462707 Jy
! Component: 200  -  total flux cleaned = 0.00540553 Jy
! Total flux subtracted in 200 components = 0.00540553 Jy
! Clean residual min=-0.001002 max=0.001408 Jy/beam
! Clean residual mean=0.000001 rms=0.000295 Jy/beam
! Combined flux in latest and established models = 0.0485789 Jy
! Performing phase self-cal
! Adding 36 model components to the UV plane model.
! The established model now contains 95 components and 0.0485789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014483Jy  sigma=0.018294
! Fit after  self-cal, rms=0.014470Jy  sigma=0.018257
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.13     HN        0.88     KP        0.94     
!   LA        1.00     MK        1.01     NL        1.02     OV        0.98     
!   PT        0.83     SC        0.95     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     HN        0.90     KP        1.04     LA        1.04     
!   MK        1.05     NL        1.06     OV        0.98     SC        0.99     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.96     HN        0.87     KP        0.95     
!   LA        0.95     MK        1.05     NL        1.01     OV        0.89     
!   PT        0.90     SC        0.90     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.13     HN        0.90     KP        0.89     LA        0.93     
!   MK        0.97     NL        0.99     OV        0.99     SC        0.86     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        1.14     HN        0.91     KP        1.04     
!   LA        0.94     MK        1.06     NL        1.01     OV        0.91     
!   PT        0.89     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.78     HN        0.93     KP        1.05     LA        0.91     
!   MK        1.12     NL        1.09     OV        1.00     SC        0.94     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.11     HN        1.02     KP        0.91     
!   LA        0.96     MK        1.08     NL        0.97     OV        0.92     
!   PT        0.88     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.92     HN        0.99     KP        0.96     LA        0.99     
!   MK        1.03     NL        0.96     OV        1.05     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        1.00     HN        0.86     KP        1.05     
!   LA        0.98     MK        0.97     NL        0.90     OV        0.91     
!   PT        0.92     SC        0.86     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     HN        0.92     KP        1.12     LA        1.02     
!   MK        0.85     NL        0.87     OV        1.00     SC        0.91     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     FD        1.00     HN        1.04     KP        1.04     
!   LA        1.00     MK        1.01     NL        0.97     OV        0.96     
!   PT        0.89     SC        0.93     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     HN        1.06     KP        1.01     LA        1.05     
!   MK        0.92     NL        0.99     OV        1.03     SC        0.92     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.08     FD        0.96     HN        0.94     KP        0.98     
!   LA        0.85     MK        0.97     NL        0.94     OV        1.04     
!   PT        0.88     SC        0.91     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.88     HN        0.85     KP        1.09     LA        0.96     
!   MK        1.00     NL        1.05     OV        1.01     SC        0.95     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.03     HN        0.96     KP        1.14     
!   LA        0.79     MK        0.90     NL        1.01     OV        0.94     
!   PT        0.81     SC        1.02     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     HN        0.94     KP        1.13     LA        0.87     
!   MK        0.98     NL        0.97     OV        0.99     SC        1.02     
! 
! 
! Fit before self-cal, rms=0.014470Jy  sigma=0.018257
! Fit after  self-cal, rms=0.013733Jy  sigma=0.016893
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9076 mas, bmaj=2.277 mas, bpa=6.871 degrees
! Estimated noise=6.73363 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00153031 Jy
! Component: 100  -  total flux cleaned = -0.0017095 Jy
! Component: 150  -  total flux cleaned = -0.00168485 Jy
! Component: 200  -  total flux cleaned = -0.0016731 Jy
! Total flux subtracted in 200 components = -0.0016731 Jy
! Clean residual min=-0.000531 max=0.000974 Jy/beam
! Clean residual mean=0.000000 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.0469058 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 104 components and 0.0469058 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013225Jy  sigma=0.017078
! Fit after  self-cal, rms=0.013233Jy  sigma=0.017067
! Inverting map 
! Added new window around map position (-5.8, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000807936 Jy
! Component: 100  -  total flux cleaned = 0.000919148 Jy
! Component: 150  -  total flux cleaned = 0.000931677 Jy
! Component: 200  -  total flux cleaned = 0.000940892 Jy
! Total flux subtracted in 200 components = 0.000940892 Jy
! Clean residual min=-0.000492 max=0.000523 Jy/beam
! Clean residual mean=0.000000 rms=0.000121 Jy/beam
! Combined flux in latest and established models = 0.0478467 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 132 components and 0.0478466 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013165Jy  sigma=0.016988
! Fit after  self-cal, rms=0.013154Jy  sigma=0.016975
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013154Jy  sigma=0.016975
! Fit after  self-cal, rms=0.012826Jy  sigma=0.016770
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9043 mas, bmaj=2.268 mas, bpa=6.88 degrees
! Estimated noise=6.36396 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00131846 Jy
! Component: 100  -  total flux cleaned = -0.00145052 Jy
! Component: 150  -  total flux cleaned = -0.00144091 Jy
! Component: 200  -  total flux cleaned = -0.0014023 Jy
! Total flux subtracted in 200 components = -0.0014023 Jy
! Clean residual min=-0.000439 max=0.000454 Jy/beam
! Clean residual mean=0.000000 rms=0.000111 Jy/beam
! Combined flux in latest and established models = 0.0464443 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 146 components and 0.0464443 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012402Jy  sigma=0.016946
! Fit after  self-cal, rms=0.012399Jy  sigma=0.016942
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-26, 24.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105299 Jy
! Component: 100  -  total flux cleaned = 0.0001025 Jy
! Component: 150  -  total flux cleaned = 9.33041e-05 Jy
! Component: 200  -  total flux cleaned = 0.000101074 Jy
! Total flux subtracted in 200 components = 0.000101074 Jy
! Clean residual min=-0.000422 max=0.000408 Jy/beam
! Clean residual mean=0.000000 rms=0.000104 Jy/beam
! Combined flux in latest and established models = 0.0465454 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 171 components and 0.0465454 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012371Jy  sigma=0.016915
! Fit after  self-cal, rms=0.012367Jy  sigma=0.016912
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012367Jy  sigma=0.016912
! Fit after  self-cal, rms=0.012070Jy  sigma=0.016723
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9008 mas, bmaj=2.262 mas, bpa=6.872 degrees
! Estimated noise=6.03019 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00119449 Jy
! Component: 100  -  total flux cleaned = -0.001488 Jy
! Component: 150  -  total flux cleaned = -0.00161595 Jy
! Component: 200  -  total flux cleaned = -0.00164056 Jy
! Total flux subtracted in 200 components = -0.00164056 Jy
! Clean residual min=-0.000422 max=0.000384 Jy/beam
! Clean residual mean=0.000000 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.0449048 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 177 components and 0.0449048 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011697Jy  sigma=0.016902
! Fit after  self-cal, rms=0.011696Jy  sigma=0.016901
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.00285e-05 Jy
! Component: 100  -  total flux cleaned = 5.006e-05 Jy
! Component: 150  -  total flux cleaned = 4.36067e-05 Jy
! Component: 200  -  total flux cleaned = 4.3526e-05 Jy
! Total flux subtracted in 200 components = 4.3526e-05 Jy
! Clean residual min=-0.000419 max=0.000384 Jy/beam
! Clean residual mean=0.000000 rms=0.000097 Jy/beam
! Combined flux in latest and established models = 0.0449484 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 194 components and 0.0449484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011682Jy  sigma=0.016897
! Fit after  self-cal, rms=0.011681Jy  sigma=0.016897
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011681Jy  sigma=0.016897
! Fit after  self-cal, rms=0.011410Jy  sigma=0.016712
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.946 mas, bmaj=2.881 mas, bpa=3.903 degrees
! Estimated noise=7.12691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00102554 Jy
! Component: 100  -  total flux cleaned = -0.0014244 Jy
! Component: 150  -  total flux cleaned = -0.00157008 Jy
! Component: 200  -  total flux cleaned = -0.00161133 Jy
! Total flux subtracted in 200 components = -0.00161133 Jy
! Clean residual min=-0.000481 max=0.000403 Jy/beam
! Clean residual mean=0.000000 rms=0.000118 Jy/beam
! Combined flux in latest and established models = 0.043337 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 215 components and 0.0433371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011111Jy  sigma=0.016857
! Fit after  self-cal, rms=0.011109Jy  sigma=0.016855
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.5587e-06 Jy
! Component: 100  -  total flux cleaned = -1.21905e-05 Jy
! Component: 150  -  total flux cleaned = -2.42987e-05 Jy
! Component: 200  -  total flux cleaned = -2.99817e-05 Jy
! Total flux subtracted in 200 components = -2.99817e-05 Jy
! Clean residual min=-0.000475 max=0.000400 Jy/beam
! Clean residual mean=0.000000 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.0433071 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 227 components and 0.0433071 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011096Jy  sigma=0.016864
! Fit after  self-cal, rms=0.011095Jy  sigma=0.016863
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8978 mas, bmaj=2.258 mas, bpa=6.874 degrees
! Estimated noise=5.71894 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8978 x 2.258 at 6.874 degrees (North through East)
! Clean map  min=-0.00037147  max=0.023998 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6817 mas, bmaj=1.98 mas, bpa=8.702 degrees
! Estimated noise=11.5965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0179816 Jy
! Component: 100  -  total flux cleaned = 0.0223255 Jy
! Component: 150  -  total flux cleaned = 0.0246938 Jy
! Component: 200  -  total flux cleaned = 0.0265232 Jy
! Total flux subtracted in 200 components = 0.0265232 Jy
! Clean residual min=-0.001037 max=0.001311 Jy/beam
! Clean residual mean=0.000001 rms=0.000270 Jy/beam
! Combined flux in latest and established models = 0.0265232 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0265232 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8978 mas, bmaj=2.258 mas, bpa=6.874 degrees
! Estimated noise=5.71894 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00332055 Jy
! Component: 100  -  total flux cleaned = 0.00571872 Jy
! Component: 150  -  total flux cleaned = 0.00756045 Jy
! Component: 200  -  total flux cleaned = 0.00901987 Jy
! Total flux subtracted in 200 components = 0.00901987 Jy
! Clean residual min=-0.000722 max=0.000945 Jy/beam
! Clean residual mean=0.000000 rms=0.000276 Jy/beam
! Combined flux in latest and established models = 0.0355431 Jy
! Adding 58 model components to the UV plane model.
! The established model now contains 67 components and 0.0355431 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.946 mas, bmaj=2.881 mas, bpa=3.903 degrees
! Estimated noise=7.12691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00232258 Jy
! Component: 100  -  total flux cleaned = 0.00385271 Jy
! Component: 150  -  total flux cleaned = 0.00493604 Jy
! Component: 200  -  total flux cleaned = 0.00572934 Jy
! Total flux subtracted in 200 components = 0.00572934 Jy
! Clean residual min=-0.000686 max=0.000755 Jy/beam
! Clean residual mean=0.000000 rms=0.000212 Jy/beam
! Combined flux in latest and established models = 0.0412725 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000527365 Jy
! Component: 100  -  total flux cleaned = 0.000826642 Jy
! Component: 150  -  total flux cleaned = 0.00107071 Jy
! Component: 200  -  total flux cleaned = 0.00127125 Jy
! Total flux subtracted in 200 components = 0.00127125 Jy
! Clean residual min=-0.000518 max=0.000502 Jy/beam
! Clean residual mean=0.000000 rms=0.000138 Jy/beam
! Combined flux in latest and established models = 0.0425437 Jy
! Adding 136 model components to the UV plane model.
! The established model now contains 188 components and 0.0425437 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8978 mas, bmaj=2.258 mas, bpa=6.874 degrees
! Estimated noise=5.71894 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000191743 Jy
! Component: 100  -  total flux cleaned = 0.000266604 Jy
! Component: 150  -  total flux cleaned = 0.000294634 Jy
! Component: 200  -  total flux cleaned = 0.00032893 Jy
! Total flux subtracted in 200 components = 0.00032893 Jy
! Clean residual min=-0.000391 max=0.000360 Jy/beam
! Clean residual mean=0.000000 rms=0.000094 Jy/beam
! Combined flux in latest and established models = 0.0428727 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 215 components and 0.0428727 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011068Jy  sigma=0.016935
! Fit after  self-cal, rms=0.011065Jy  sigma=0.016925
wmodel ./J0950+4553_X_map.mod
! Writing 215 model components to file: ./J0950+4553_X_map.mod
wobs ./J0950+4553_X_uvs.fits
! Writing UV FITS file: ./J0950+4553_X_uvs.fits
wwins ./J0950+4553_X_map.win
! wwins: Wrote 5 windows to ./J0950+4553_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000130138 Jy
! Component: 100  -  total flux cleaned = -0.000196168 Jy
! Component: 150  -  total flux cleaned = -0.000202687 Jy
! Component: 200  -  total flux cleaned = -0.000166979 Jy
! Component: 250  -  total flux cleaned = -0.000155449 Jy
! Component: 300  -  total flux cleaned = -0.000138758 Jy
! Component: 350  -  total flux cleaned = -0.000133158 Jy
! Component: 400  -  total flux cleaned = -0.000100818 Jy
! Component: 450  -  total flux cleaned = -0.000100699 Jy
! Component: 500  -  total flux cleaned = -7.4802e-05 Jy
! Component: 550  -  total flux cleaned = -5.95674e-05 Jy
! Component: 600  -  total flux cleaned = -4.47518e-05 Jy
! Component: 650  -  total flux cleaned = -3.0172e-05 Jy
! Component: 700  -  total flux cleaned = -1.09851e-05 Jy
! Component: 750  -  total flux cleaned = 7.89108e-06 Jy
! Component: 800  -  total flux cleaned = 7.92067e-06 Jy
! Component: 850  -  total flux cleaned = 3.08833e-05 Jy
! Component: 900  -  total flux cleaned = 1.72369e-05 Jy
! Component: 950  -  total flux cleaned = 2.17966e-05 Jy
! Component: 1000  -  total flux cleaned = 3.52044e-05 Jy
! Component: 1050  -  total flux cleaned = 3.96082e-05 Jy
! Component: 1100  -  total flux cleaned = 4.83705e-05 Jy
! Component: 1150  -  total flux cleaned = 5.6932e-05 Jy
! Component: 1200  -  total flux cleaned = 4.83802e-05 Jy
! Component: 1250  -  total flux cleaned = 5.25604e-05 Jy
! Component: 1300  -  total flux cleaned = 3.19394e-05 Jy
! Component: 1350  -  total flux cleaned = 1.96632e-05 Jy
! Component: 1400  -  total flux cleaned = 1.5604e-05 Jy
! Component: 1450  -  total flux cleaned = -4.4239e-06 Jy
! Component: 1500  -  total flux cleaned = -2.82451e-05 Jy
! Component: 1550  -  total flux cleaned = -4.7872e-05 Jy
! Component: 1600  -  total flux cleaned = -5.56634e-05 Jy
! Component: 1650  -  total flux cleaned = -7.87811e-05 Jy
! Component: 1700  -  total flux cleaned = -7.87376e-05 Jy
! Component: 1750  -  total flux cleaned = -0.000109075 Jy
! Component: 1800  -  total flux cleaned = -0.000101598 Jy
! Component: 1850  -  total flux cleaned = -0.000135088 Jy
! Component: 1900  -  total flux cleaned = -0.000142465 Jy
! Component: 1950  -  total flux cleaned = -0.000160762 Jy
! Component: 2000  -  total flux cleaned = -0.000178928 Jy
! Component: 2050  -  total flux cleaned = -0.000182514 Jy
! Component: 2100  -  total flux cleaned = -0.000196854 Jy
! Component: 2150  -  total flux cleaned = -0.000221654 Jy
! Component: 2200  -  total flux cleaned = -0.000235715 Jy
! Component: 2250  -  total flux cleaned = -0.000235692 Jy
! Component: 2300  -  total flux cleaned = -0.00024263 Jy
! Component: 2350  -  total flux cleaned = -0.000249507 Jy
! Component: 2400  -  total flux cleaned = -0.000273388 Jy
! Component: 2450  -  total flux cleaned = -0.000280129 Jy
! Component: 2500  -  total flux cleaned = -0.000300282 Jy
! Component: 2550  -  total flux cleaned = -0.00030694 Jy
! Component: 2600  -  total flux cleaned = -0.000306898 Jy
! Component: 2650  -  total flux cleaned = -0.000313491 Jy
! Component: 2700  -  total flux cleaned = -0.000297135 Jy
! Component: 2750  -  total flux cleaned = -0.00031671 Jy
! Component: 2800  -  total flux cleaned = -0.000316715 Jy
! Component: 2850  -  total flux cleaned = -0.000313472 Jy
! Component: 2900  -  total flux cleaned = -0.000326241 Jy
! Component: 2950  -  total flux cleaned = -0.000319868 Jy
! Component: 3000  -  total flux cleaned = -0.000319827 Jy
! Component: 3050  -  total flux cleaned = -0.000310421 Jy
! Component: 3100  -  total flux cleaned = -0.000310434 Jy
! Component: 3150  -  total flux cleaned = -0.000304223 Jy
! Component: 3200  -  total flux cleaned = -0.000316596 Jy
! Component: 3250  -  total flux cleaned = -0.000313555 Jy
! Component: 3300  -  total flux cleaned = -0.000319664 Jy
! Component: 3350  -  total flux cleaned = -0.000334816 Jy
! Component: 3400  -  total flux cleaned = -0.000328781 Jy
! Component: 3450  -  total flux cleaned = -0.000331775 Jy
! Component: 3500  -  total flux cleaned = -0.00033775 Jy
! Component: 3550  -  total flux cleaned = -0.000337756 Jy
! Component: 3600  -  total flux cleaned = -0.000334799 Jy
! Component: 3650  -  total flux cleaned = -0.000337723 Jy
! Component: 3700  -  total flux cleaned = -0.000343575 Jy
! Component: 3750  -  total flux cleaned = -0.00033777 Jy
! Component: 3800  -  total flux cleaned = -0.000334855 Jy
! Component: 3850  -  total flux cleaned = -0.000334854 Jy
! Component: 3900  -  total flux cleaned = -0.000343474 Jy
! Component: 3950  -  total flux cleaned = -0.00035489 Jy
! Component: 4000  -  total flux cleaned = -0.0003492 Jy
! Component: 4050  -  total flux cleaned = -0.000366222 Jy
! Total flux subtracted in 4096 components = -0.000369041 Jy
! Clean residual min=-0.000187 max=0.000191 Jy/beam
! Clean residual mean=0.000000 rms=0.000049 Jy/beam
! Combined flux in latest and established models = 0.0425036 Jy
keep
! Adding 320 model components to the UV plane model.
! The established model now contains 535 components and 0.0425036 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "./J0950+4553_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8978 x 2.258 at 6.874 degrees (North through East)
! Clean map  min=-0.00028383  max=0.024069 Jy/beam
! Writing clean map to FITS file: ./J0950+4553_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.024069 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 4.94012e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.615744 0.615744 1.23149 2.46298 4.92595 9.85191 19.7038 39.4076 78.8153
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.024 
quit
! Quitting program
! Log file ./J0950+4553_X_uvs.log closed on Mon Oct 28 15:38:40 2013