! Started logfile: ./J0839+3540_X_uvs.log on Mon Oct 28 15:38:00 2013
obs J0839+3540_X_uvm.fits
! Reading UV FITS file: J0839+3540_X_uvm.fits
! AN table 1: 11 integrations on 15 of 15 possible baselines.
! AN table 2: 19 integrations on 28 of 28 possible baselines.
! AN table 3: 23 integrations on 28 of 28 possible baselines.
! Apparent sampling: 0.941834 visibilities/baseline/integration-bin.
! Found source: J0839+3540
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 10104 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet ./J0839+3540_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 13 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 13 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 13 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 13 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 5.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 13 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 6.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 13 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 7.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 13 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 8.
!  A total of 1 telescope corrections were flagged in sub-array 1.
!  A total of 13 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.000790Jy  sigma=1.364024
! Fit after  self-cal, rms=0.973838Jy  sigma=1.317050
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.913 mas, bmaj=1.663 mas, bpa=6.364 degrees
! Estimated noise=11.0788 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0218952 Jy
! Component: 100  -  total flux cleaned = 0.027582 Jy
! Total flux subtracted in 100 components = 0.027582 Jy
! Clean residual min=-0.001643 max=0.003003 Jy/beam
! Clean residual mean=-0.000004 rms=0.000368 Jy/beam
! Combined flux in latest and established models = 0.027582 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.027582 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.018065Jy  sigma=0.025572
! Fit after  self-cal, rms=0.015206Jy  sigma=0.022222
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00383143 Jy
! Component: 100  -  total flux cleaned = 0.00570598 Jy
! Total flux subtracted in 100 components = 0.00570598 Jy
! Clean residual min=-0.001115 max=0.002897 Jy/beam
! Clean residual mean=-0.000003 rms=0.000274 Jy/beam
! Combined flux in latest and established models = 0.0332879 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 11 components and 0.0332879 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014819Jy  sigma=0.019416
! Fit after  self-cal, rms=0.014796Jy  sigma=0.019390
! Inverting map 
! Added new window around map position (-1.4, -1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243004 Jy
! Component: 100  -  total flux cleaned = 0.00359366 Jy
! Total flux subtracted in 100 components = 0.00359366 Jy
! Clean residual min=-0.000888 max=0.001078 Jy/beam
! Clean residual mean=-0.000002 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.0368816 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 26 components and 0.0368816 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014441Jy  sigma=0.018427
! Fit after  self-cal, rms=0.014370Jy  sigma=0.018347
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.197 mas, bmaj=2.085 mas, bpa=5.868 degrees
! Estimated noise=5.61192 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00149999 Jy
! Component: 100  -  total flux cleaned = 0.00235429 Jy
! Component: 150  -  total flux cleaned = 0.0029371 Jy
! Component: 200  -  total flux cleaned = 0.00334109 Jy
! Total flux subtracted in 200 components = 0.00334109 Jy
! Clean residual min=-0.000869 max=0.000828 Jy/beam
! Clean residual mean=-0.000004 rms=0.000186 Jy/beam
! Combined flux in latest and established models = 0.0402227 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 38 components and 0.0402227 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.014295Jy  sigma=0.017914
! Fit after  self-cal, rms=0.014277Jy  sigma=0.017888
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     HN        0.91     KP        1.00     LA        1.04     
!   OV        0.98     SC        0.90     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.02     HN        0.89     KP        0.93     LA        1.07     
!   MK        1.09     NL        0.92     OV        0.95     PT        0.86     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.05     HN        0.92     KP        0.94     LA        1.03     
!   NL        1.03     OV        1.02     PT        0.86     SC        0.91     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     HN        0.90     KP        0.95     LA        0.96     
!   OV        0.93     SC        0.96     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     HN        0.94     KP        0.95     LA        0.86     
!   MK        1.08     NL        1.05     OV        0.93     PT        0.91     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.08     HN        0.89     KP        0.94     LA        0.99     
!   NL        1.01     OV        0.96     PT        0.94     SC        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.77     HN        0.89     KP        1.13     LA        0.97     
!   OV        1.01     SC        1.01     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.82     HN        0.94     KP        1.13     LA        0.90     
!   MK        1.07     NL        0.98     OV        1.01     PT        0.93     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.83     HN        0.86     KP        1.10     LA        0.96     
!   NL        1.01     OV        0.96     PT        0.89     SC        0.96     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     HN        0.90     KP        0.96     LA        0.94     
!   OV        1.05     SC        0.94     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     HN        0.86     KP        0.97     LA        0.98     
!   MK        1.01     NL        0.96     OV        0.98     PT        0.93     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.94     HN        0.95     KP        0.96     LA        0.98     
!   NL        0.97     OV        0.98     PT        0.97     SC        1.02     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        0.89     KP        1.09     LA        0.99     
!   OV        0.91     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.90     HN        0.89     KP        1.08     LA        0.94     
!   MK        1.04     NL        0.94     OV        1.00     PT        0.88     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.91     HN        0.96     KP        1.08     LA        1.00     
!   NL        0.86     OV        0.95     PT        0.93     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     HN        0.95     KP        1.07     LA        1.01     
!   OV        1.02     SC        1.00     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.06     HN        1.01     KP        1.12     LA        1.00     
!   MK        1.00     NL        1.00     OV        0.99     PT        0.97     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.95     HN        0.95     KP        1.11     LA        1.02     
!   NL        0.94     OV        1.03     PT        0.96     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     HN        0.94     KP        0.93     LA        0.98     
!   OV        1.06     SC        0.97     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     HN        0.89     KP        1.01     LA        0.92     
!   MK        1.02     NL        1.02     OV        1.04     PT        0.90     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.99     HN        0.98     KP        1.01     LA        0.90     
!   NL        1.00     OV        1.00     PT        0.89     SC        0.98     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        0.89     KP        1.08     LA        0.92     
!   OV        1.02     SC        1.05     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.10     HN        0.97     KP        1.04     LA        0.92     
!   MK        1.02     NL        0.95     OV        1.04     PT        0.86     
! 
!  A total of 3 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.06     HN        0.98     KP        1.11     LA        0.88     
!   NL        0.99     OV        1.08     PT        0.82     SC        1.08     
! 
! 
! Fit before self-cal, rms=0.014277Jy  sigma=0.017888
! Fit after  self-cal, rms=0.013641Jy  sigma=0.016946
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.204 mas, bmaj=2.093 mas, bpa=5.948 degrees
! Estimated noise=5.26575 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00147401 Jy
! Component: 100  -  total flux cleaned = -0.0016905 Jy
! Component: 150  -  total flux cleaned = -0.00165282 Jy
! Component: 200  -  total flux cleaned = -0.00164491 Jy
! Total flux subtracted in 200 components = -0.00164491 Jy
! Clean residual min=-0.000459 max=0.000597 Jy/beam
! Clean residual mean=-0.000001 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.0385778 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 45 components and 0.0385778 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013164Jy  sigma=0.017138
! Fit after  self-cal, rms=0.013175Jy  sigma=0.017128
! Inverting map 
! Added new window around map position (-3, -3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000614674 Jy
! Component: 100  -  total flux cleaned = 0.00078192 Jy
! Component: 150  -  total flux cleaned = 0.000792948 Jy
! Component: 200  -  total flux cleaned = 0.000802242 Jy
! Total flux subtracted in 200 components = 0.000802242 Jy
! Clean residual min=-0.000439 max=0.000415 Jy/beam
! Clean residual mean=-0.000000 rms=0.000100 Jy/beam
! Combined flux in latest and established models = 0.03938 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 66 components and 0.03938 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013127Jy  sigma=0.017082
! Fit after  self-cal, rms=0.013122Jy  sigma=0.017074
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.013122Jy  sigma=0.017074
! Fit after  self-cal, rms=0.012776Jy  sigma=0.016750
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.199 mas, bmaj=2.071 mas, bpa=5.219 degrees
! Estimated noise=4.97111 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00133114 Jy
! Component: 100  -  total flux cleaned = -0.00142964 Jy
! Component: 150  -  total flux cleaned = -0.00141014 Jy
! Component: 200  -  total flux cleaned = -0.0014099 Jy
! Total flux subtracted in 200 components = -0.0014099 Jy
! Clean residual min=-0.000381 max=0.000381 Jy/beam
! Clean residual mean=-0.000000 rms=0.000084 Jy/beam
! Combined flux in latest and established models = 0.0379701 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 77 components and 0.0379701 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012359Jy  sigma=0.016928
! Fit after  self-cal, rms=0.012359Jy  sigma=0.016925
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-43.6, -29.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000330266 Jy
! Component: 100  -  total flux cleaned = 0.000531894 Jy
! Component: 150  -  total flux cleaned = 0.000674559 Jy
! Component: 200  -  total flux cleaned = 0.000746129 Jy
! Total flux subtracted in 200 components = 0.000746129 Jy
! Clean residual min=-0.000361 max=0.000340 Jy/beam
! Clean residual mean=-0.000000 rms=0.000079 Jy/beam
! Combined flux in latest and established models = 0.0387162 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 98 components and 0.0387162 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012343Jy  sigma=0.016911
! Fit after  self-cal, rms=0.012341Jy  sigma=0.016908
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.012341Jy  sigma=0.016908
! Fit after  self-cal, rms=0.012039Jy  sigma=0.016721
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.195 mas, bmaj=2.065 mas, bpa=4.962 degrees
! Estimated noise=4.70664 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00121121 Jy
! Component: 100  -  total flux cleaned = -0.00150121 Jy
! Component: 150  -  total flux cleaned = -0.00150565 Jy
! Component: 200  -  total flux cleaned = -0.00146509 Jy
! Total flux subtracted in 200 components = -0.00146509 Jy
! Clean residual min=-0.000353 max=0.000319 Jy/beam
! Clean residual mean=-0.000000 rms=0.000075 Jy/beam
! Combined flux in latest and established models = 0.0372511 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 102 components and 0.0372511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011669Jy  sigma=0.016903
! Fit after  self-cal, rms=0.011668Jy  sigma=0.016902
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000101953 Jy
! Component: 100  -  total flux cleaned = 0.000153274 Jy
! Component: 150  -  total flux cleaned = 0.000181664 Jy
! Component: 200  -  total flux cleaned = 0.000203725 Jy
! Total flux subtracted in 200 components = 0.000203725 Jy
! Clean residual min=-0.000350 max=0.000310 Jy/beam
! Clean residual mean=-0.000000 rms=0.000074 Jy/beam
! Combined flux in latest and established models = 0.0374549 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 107 components and 0.0374549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011661Jy  sigma=0.016901
! Fit after  self-cal, rms=0.011660Jy  sigma=0.016900
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011660Jy  sigma=0.016900
! Fit after  self-cal, rms=0.011385Jy  sigma=0.016715
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.26 mas, bmaj=2.901 mas, bpa=0.8545 degrees
! Estimated noise=5.01473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00116123 Jy
! Component: 100  -  total flux cleaned = -0.00138836 Jy
! Component: 150  -  total flux cleaned = -0.00137435 Jy
! Component: 200  -  total flux cleaned = -0.00133427 Jy
! Total flux subtracted in 200 components = -0.00133427 Jy
! Clean residual min=-0.000360 max=0.000292 Jy/beam
! Clean residual mean=-0.000000 rms=0.000080 Jy/beam
! Combined flux in latest and established models = 0.0361206 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 113 components and 0.0361206 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011038Jy  sigma=0.016905
! Fit after  self-cal, rms=0.011038Jy  sigma=0.016903
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.79424e-05 Jy
! Component: 100  -  total flux cleaned = 0.000131289 Jy
! Component: 150  -  total flux cleaned = 0.000142743 Jy
! Component: 200  -  total flux cleaned = 0.000147917 Jy
! Total flux subtracted in 200 components = 0.000147917 Jy
! Clean residual min=-0.000356 max=0.000290 Jy/beam
! Clean residual mean=-0.000000 rms=0.000078 Jy/beam
! Combined flux in latest and established models = 0.0362685 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 128 components and 0.0362685 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011033Jy  sigma=0.016910
! Fit after  self-cal, rms=0.011033Jy  sigma=0.016909
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.192 mas, bmaj=2.061 mas, bpa=4.806 degrees
! Estimated noise=4.46041 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.192 x 2.061 at 4.806 degrees (North through East)
! Clean map  min=-0.00032431  max=0.024433 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.914 mas, bmaj=1.645 mas, bpa=4.783 degrees
! Estimated noise=8.70834 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0183279 Jy
! Component: 100  -  total flux cleaned = 0.0236658 Jy
! Component: 150  -  total flux cleaned = 0.0265071 Jy
! Component: 200  -  total flux cleaned = 0.0282515 Jy
! Total flux subtracted in 200 components = 0.0282515 Jy
! Clean residual min=-0.000768 max=0.000924 Jy/beam
! Clean residual mean=-0.000002 rms=0.000173 Jy/beam
! Combined flux in latest and established models = 0.0282515 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0282515 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.192 mas, bmaj=2.061 mas, bpa=4.806 degrees
! Estimated noise=4.46041 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00196013 Jy
! Component: 100  -  total flux cleaned = 0.00322447 Jy
! Component: 150  -  total flux cleaned = 0.00411211 Jy
! Component: 200  -  total flux cleaned = 0.0047658 Jy
! Total flux subtracted in 200 components = 0.0047658 Jy
! Clean residual min=-0.000427 max=0.000512 Jy/beam
! Clean residual mean=-0.000002 rms=0.000102 Jy/beam
! Combined flux in latest and established models = 0.0330173 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 57 components and 0.0330173 Jy
! Inverting map 
! Added new window around map position (-7.8, 4.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000532614 Jy
! Component: 100  -  total flux cleaned = 0.000939735 Jy
! Component: 150  -  total flux cleaned = 0.00127582 Jy
! Component: 200  -  total flux cleaned = 0.00155885 Jy
! Total flux subtracted in 200 components = 0.00155885 Jy
! Clean residual min=-0.000379 max=0.000310 Jy/beam
! Clean residual mean=-0.000001 rms=0.000078 Jy/beam
! Combined flux in latest and established models = 0.0345762 Jy
! Adding 45 model components to the UV plane model.
! The established model now contains 95 components and 0.0345761 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.26 mas, bmaj=2.901 mas, bpa=0.8545 degrees
! Estimated noise=5.01473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000357114 Jy
! Component: 100  -  total flux cleaned = 0.000630649 Jy
! Component: 150  -  total flux cleaned = 0.000854417 Jy
! Component: 200  -  total flux cleaned = 0.00103962 Jy
! Total flux subtracted in 200 components = 0.00103962 Jy
! Clean residual min=-0.000389 max=0.000307 Jy/beam
! Clean residual mean=-0.000001 rms=0.000084 Jy/beam
! Combined flux in latest and established models = 0.0356158 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.94597e-05 Jy
! Component: 100  -  total flux cleaned = 0.000163847 Jy
! Component: 150  -  total flux cleaned = 0.000235933 Jy
! Component: 200  -  total flux cleaned = 0.000287363 Jy
! Total flux subtracted in 200 components = 0.000287363 Jy
! Clean residual min=-0.000382 max=0.000294 Jy/beam
! Clean residual mean=-0.000000 rms=0.000079 Jy/beam
! Combined flux in latest and established models = 0.0359031 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 146 components and 0.0359031 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.192 mas, bmaj=2.061 mas, bpa=4.806 degrees
! Estimated noise=4.46041 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.35435e-05 Jy
! Component: 100  -  total flux cleaned = 1.03627e-05 Jy
! Component: 150  -  total flux cleaned = 4.56416e-05 Jy
! Component: 200  -  total flux cleaned = 6.44043e-05 Jy
! Total flux subtracted in 200 components = 6.44043e-05 Jy
! Clean residual min=-0.000345 max=0.000297 Jy/beam
! Clean residual mean=-0.000000 rms=0.000068 Jy/beam
! Combined flux in latest and established models = 0.0359675 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 166 components and 0.0359675 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.011022Jy  sigma=0.016916
! Fit after  self-cal, rms=0.011019Jy  sigma=0.016912
wmodel ./J0839+3540_X_map.mod
! Writing 166 model components to file: ./J0839+3540_X_map.mod
wobs ./J0839+3540_X_uvs.fits
! Writing UV FITS file: ./J0839+3540_X_uvs.fits
wwins ./J0839+3540_X_map.win
! wwins: Wrote 5 windows to ./J0839+3540_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -9.0546e-05 Jy
! Component: 100  -  total flux cleaned = -0.000149772 Jy
! Component: 150  -  total flux cleaned = -0.000190672 Jy
! Component: 200  -  total flux cleaned = -0.000216922 Jy
! Component: 250  -  total flux cleaned = -0.000229614 Jy
! Component: 300  -  total flux cleaned = -0.000233795 Jy
! Component: 350  -  total flux cleaned = -0.000225676 Jy
! Component: 400  -  total flux cleaned = -0.000221682 Jy
! Component: 450  -  total flux cleaned = -0.000206094 Jy
! Component: 500  -  total flux cleaned = -0.000198474 Jy
! Component: 550  -  total flux cleaned = -0.000179586 Jy
! Component: 600  -  total flux cleaned = -0.000164719 Jy
! Component: 650  -  total flux cleaned = -0.000153683 Jy
! Component: 700  -  total flux cleaned = -0.000149994 Jy
! Component: 750  -  total flux cleaned = -0.000142773 Jy
! Component: 800  -  total flux cleaned = -0.000128622 Jy
! Component: 850  -  total flux cleaned = -0.000125148 Jy
! Component: 900  -  total flux cleaned = -0.000125098 Jy
! Component: 950  -  total flux cleaned = -0.00011825 Jy
! Component: 1000  -  total flux cleaned = -0.000111494 Jy
! Component: 1050  -  total flux cleaned = -0.000114872 Jy
! Component: 1100  -  total flux cleaned = -0.000114858 Jy
! Component: 1150  -  total flux cleaned = -0.000118134 Jy
! Component: 1200  -  total flux cleaned = -0.000111595 Jy
! Component: 1250  -  total flux cleaned = -0.000108402 Jy
! Component: 1300  -  total flux cleaned = -0.000111627 Jy
! Component: 1350  -  total flux cleaned = -0.00011479 Jy
! Component: 1400  -  total flux cleaned = -0.000117866 Jy
! Component: 1450  -  total flux cleaned = -9.91861e-05 Jy
! Component: 1500  -  total flux cleaned = -8.9935e-05 Jy
! Component: 1550  -  total flux cleaned = -9.3042e-05 Jy
! Component: 1600  -  total flux cleaned = -8.69261e-05 Jy
! Component: 1650  -  total flux cleaned = -8.69483e-05 Jy
! Component: 1700  -  total flux cleaned = -8.08636e-05 Jy
! Component: 1750  -  total flux cleaned = -6.30012e-05 Jy
! Component: 1800  -  total flux cleaned = -5.40928e-05 Jy
! Component: 1850  -  total flux cleaned = -3.64977e-05 Jy
! Component: 1900  -  total flux cleaned = -3.65115e-05 Jy
! Component: 1950  -  total flux cleaned = -3.64788e-05 Jy
! Component: 2000  -  total flux cleaned = -2.20883e-05 Jy
! Component: 2050  -  total flux cleaned = -1.63921e-05 Jy
! Component: 2100  -  total flux cleaned = -1.35289e-05 Jy
! Component: 2150  -  total flux cleaned = -2.25064e-06 Jy
! Component: 2200  -  total flux cleaned = -2.26773e-06 Jy
! Component: 2250  -  total flux cleaned = 6.08603e-06 Jy
! Component: 2300  -  total flux cleaned = -4.96594e-06 Jy
! Component: 2350  -  total flux cleaned = 1.4305e-05 Jy
! Component: 2400  -  total flux cleaned = 2.80284e-05 Jy
! Component: 2450  -  total flux cleaned = 1.98492e-05 Jy
! Component: 2500  -  total flux cleaned = 2.52517e-05 Jy
! Component: 2550  -  total flux cleaned = 3.8711e-05 Jy
! Component: 2600  -  total flux cleaned = 3.60605e-05 Jy
! Component: 2650  -  total flux cleaned = 4.13848e-05 Jy
! Component: 2700  -  total flux cleaned = 5.46176e-05 Jy
! Component: 2750  -  total flux cleaned = 5.98625e-05 Jy
! Component: 2800  -  total flux cleaned = 6.76911e-05 Jy
! Component: 2850  -  total flux cleaned = 6.51011e-05 Jy
! Component: 2900  -  total flux cleaned = 7.02817e-05 Jy
! Component: 2950  -  total flux cleaned = 8.0561e-05 Jy
! Component: 3000  -  total flux cleaned = 8.05516e-05 Jy
! Component: 3050  -  total flux cleaned = 8.81921e-05 Jy
! Component: 3100  -  total flux cleaned = 9.5791e-05 Jy
! Component: 3150  -  total flux cleaned = 0.000100818 Jy
! Component: 3200  -  total flux cleaned = 0.000103325 Jy
! Component: 3250  -  total flux cleaned = 0.000105818 Jy
! Component: 3300  -  total flux cleaned = 0.000120736 Jy
! Component: 3350  -  total flux cleaned = 0.000115807 Jy
! Component: 3400  -  total flux cleaned = 0.000128135 Jy
! Component: 3450  -  total flux cleaned = 0.000130572 Jy
! Component: 3500  -  total flux cleaned = 0.00012815 Jy
! Component: 3550  -  total flux cleaned = 0.000145123 Jy
! Component: 3600  -  total flux cleaned = 0.000154751 Jy
! Component: 3650  -  total flux cleaned = 0.000152356 Jy
! Component: 3700  -  total flux cleaned = 0.000161902 Jy
! Component: 3750  -  total flux cleaned = 0.000169025 Jy
! Component: 3800  -  total flux cleaned = 0.000169026 Jy
! Component: 3850  -  total flux cleaned = 0.000171374 Jy
! Component: 3900  -  total flux cleaned = 0.000173712 Jy
! Component: 3950  -  total flux cleaned = 0.000176046 Jy
! Component: 4000  -  total flux cleaned = 0.000183026 Jy
! Component: 4050  -  total flux cleaned = 0.000189943 Jy
! Total flux subtracted in 4096 components = 0.000199169 Jy
! Clean residual min=-0.000140 max=0.000139 Jy/beam
! Clean residual mean=-0.000000 rms=0.000041 Jy/beam
! Combined flux in latest and established models = 0.0361667 Jy
keep
! Adding 292 model components to the UV plane model.
! The established model now contains 458 components and 0.0361667 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "./J0839+3540_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.192 x 2.061 at 4.806 degrees (North through East)
! Clean map  min=-0.00023511  max=0.024375 Jy/beam
! Writing clean map to FITS file: ./J0839+3540_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0243749 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 4.10165e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.504821 0.504821 1.00964 2.01928 4.03856 8.07713 16.1543 32.3085 64.617
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.024 
quit
! Quitting program
! Log file ./J0839+3540_X_uvs.log closed on Mon Oct 28 15:38:14 2013