! Started logfile: ./0753+5352_X_uvs.log on Thu Oct 17 23:09:41 2013
obs 0753+5352_X_uvm.fits
! Reading UV FITS file: 0753+5352_X_uvm.fits
! AN table 1: 3 integrations on 45 of 45 possible baselines.
! AN table 2: 3 integrations on 21 of 21 possible baselines.
! AN table 3: 3 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.895425 visibilities/baseline/integration-bin.
! Found source: J0753+5352
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1    7.392e+09      3.2e+07          1      3.2e+07
!  02        2    7.424e+09      3.2e+07          1      3.2e+07
!  03        3    7.456e+09      3.2e+07          1      3.2e+07
!  04        4    7.552e+09      3.2e+07          1      3.2e+07
!  05        5    7.744e+09      3.2e+07          1      3.2e+07
!  06        6    7.776e+09      3.2e+07          1      3.2e+07
!  07        7    7.808e+09      3.2e+07          1      3.2e+07
!  08        8     7.84e+09      3.2e+07          1      3.2e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 2192 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 1024 
print "field_cell =",field_cell
! field_cell = 0.2 
print "taper_size =",taper_size
! taper_size = 70 
![@/home/lpetrov/bin/01_muppet ./0753+5352_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 5.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 6.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 7.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 8.
!  A total of 2 telescope corrections were flagged in sub-array 1.
!  A total of 2 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.112289Jy  sigma=23.528564
! Fit after  self-cal, rms=0.563506Jy  sigma=8.847433
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8417 mas, bmaj=2.741 mas, bpa=-45.8 degrees
! Estimated noise=1.46889 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.362705 Jy
! Component: 100  -  total flux cleaned = 0.497498 Jy
! Total flux subtracted in 100 components = 0.497498 Jy
! Clean residual min=-0.022082 max=0.063479 Jy/beam
! Clean residual mean=0.000041 rms=0.007450 Jy/beam
! Combined flux in latest and established models = 0.497498 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.497498 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.133250Jy  sigma=3.369158
! Fit after  self-cal, rms=0.133080Jy  sigma=3.367027
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0720305 Jy
! Component: 100  -  total flux cleaned = 0.113477 Jy
! Total flux subtracted in 100 components = 0.113477 Jy
! Clean residual min=-0.017958 max=0.023053 Jy/beam
! Clean residual mean=0.000025 rms=0.003959 Jy/beam
! Combined flux in latest and established models = 0.610975 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 23 components and 0.610974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.086077Jy  sigma=1.895043
! Fit after  self-cal, rms=0.086434Jy  sigma=1.893035
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0201721 Jy
! Component: 100  -  total flux cleaned = 0.0302235 Jy
! Total flux subtracted in 100 components = 0.0302235 Jy
! Clean residual min=-0.015023 max=0.018713 Jy/beam
! Clean residual mean=0.000021 rms=0.003270 Jy/beam
! Combined flux in latest and established models = 0.641198 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 33 components and 0.641198 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.077208Jy  sigma=1.610444
! Fit after  self-cal, rms=0.077214Jy  sigma=1.607175
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.254 mas, bmaj=2.999 mas, bpa=-47.7 degrees
! Estimated noise=0.836622 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.021265 Jy
! Component: 100  -  total flux cleaned = 0.0329093 Jy
! Component: 150  -  total flux cleaned = 0.0382301 Jy
! Component: 200  -  total flux cleaned = 0.0405492 Jy
! Total flux subtracted in 200 components = 0.0405492 Jy
! Clean residual min=-0.013235 max=0.014927 Jy/beam
! Clean residual mean=0.000041 rms=0.003728 Jy/beam
! Combined flux in latest and established models = 0.681747 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 57 components and 0.681747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.072988Jy  sigma=1.431127
! Fit after  self-cal, rms=0.072542Jy  sigma=1.428137
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.11     HN        0.94     KP        1.00     
!   LA        0.99     MK        1.11     NL        1.02     OV        0.96     
!   PT        0.86     SC        1.15     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.03     HN        0.92     KP        1.04     LA        1.05     
!   NL        1.04     OV        1.07     PT        0.88     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.05     HN        0.98     KP        0.99     LA        1.03     
!   MK        0.86     NL        1.00     OV        1.03     PT        0.87     
!   SC        1.08     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.00     HN        0.94     KP        0.98     
!   LA        0.94     MK        1.14     NL        1.00     OV        0.92     
!   PT        0.89     SC        1.09     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.08     HN        0.91     KP        1.04     LA        1.00     
!   NL        1.06     OV        1.03     PT        0.92     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.09     HN        0.98     KP        1.00     LA        0.99     
!   MK        0.88     NL        1.03     OV        0.97     PT        0.91     
!   SC        1.10     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.80     FD        1.11     HN        1.00     KP        1.06     
!   LA        0.95     MK        1.16     NL        1.00     OV        1.01     
!   PT        0.93     SC        1.18     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.83     HN        0.98     KP        1.13     LA        0.99     
!   NL        1.04     OV        1.09     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.85     HN        1.02     KP        1.09     LA        0.97     
!   MK        0.92     NL        1.00     OV        1.02     PT        0.94     
!   SC        1.14     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        1.13     HN        1.04     KP        0.97     
!   LA        0.96     MK        1.20     NL        0.95     OV        1.03     
!   PT        0.95     SC        1.18     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.97     HN        1.02     KP        1.02     LA        1.02     
!   NL        1.02     OV        1.07     PT        0.98     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.96     HN        1.07     KP        0.96     LA        1.00     
!   MK        0.92     NL        0.97     OV        1.02     PT        0.98     
!   SC        1.17     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        1.04     HN        1.00     KP        1.05     
!   LA        0.99     MK        1.10     NL        0.92     OV        0.99     
!   PT        0.90     SC        1.14     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.94     HN        0.99     KP        1.17     LA        1.03     
!   NL        0.99     OV        1.07     PT        0.94     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.92     HN        1.06     KP        1.11     LA        1.03     
!   MK        0.85     NL        0.95     OV        1.01     PT        0.93     
!   SC        1.13     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.06     HN        1.12     KP        1.04     
!   LA        1.05     MK        1.13     NL        0.99     OV        1.05     
!   PT        0.92     SC        1.16     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.04     HN        1.08     KP        1.15     LA        1.09     
!   NL        1.05     OV        1.13     PT        0.97     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.02     HN        1.17     KP        1.08     LA        1.08     
!   MK        0.86     NL        0.99     OV        1.06     PT        0.96     
!   SC        1.18     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.05     HN        1.04     KP        1.03     
!   LA        0.93     MK        1.14     NL        0.99     OV        1.07     
!   PT        0.90     SC        1.17     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.00     HN        0.99     KP        1.10     LA        1.00     
!   NL        1.05     OV        1.15     PT        0.93     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.98     HN        1.08     KP        1.03     LA        0.97     
!   MK        0.86     NL        1.00     OV        1.07     PT        0.91     
!   SC        1.12     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.04     HN        1.04     KP        1.08     
!   LA        0.89     MK        1.10     NL        0.96     OV        1.01     
!   PT        0.84     SC        1.33     
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.15     HN        1.00     KP        1.15     LA        0.93     
!   NL        1.02     OV        1.15     PT        0.87     
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.13     HN        1.07     KP        1.09     LA        0.92     
!   MK        0.85     NL        0.97     OV        1.07     PT        0.85     
!   SC        1.28     
! 
! 
! Fit before self-cal, rms=0.072542Jy  sigma=1.428137
! Fit after  self-cal, rms=0.049450Jy  sigma=0.653847
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.257 mas, bmaj=3.008 mas, bpa=-47.67 degrees
! Estimated noise=0.83619 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00371874 Jy
! Component: 100  -  total flux cleaned = -0.00358142 Jy
! Component: 150  -  total flux cleaned = -0.0032225 Jy
! Component: 200  -  total flux cleaned = -0.00300964 Jy
! Total flux subtracted in 200 components = -0.00300964 Jy
! Clean residual min=-0.005976 max=0.006371 Jy/beam
! Clean residual mean=-0.000002 rms=0.000998 Jy/beam
! Combined flux in latest and established models = 0.678738 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 65 components and 0.678738 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047663Jy  sigma=0.639820
! Fit after  self-cal, rms=0.047410Jy  sigma=0.636495
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.047410Jy  sigma=0.636495
! Fit after  self-cal, rms=0.047313Jy  sigma=0.634962
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.256 mas, bmaj=3.007 mas, bpa=-47.65 degrees
! Estimated noise=0.835381 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00277628 Jy
! Component: 100  -  total flux cleaned = -0.00267537 Jy
! Component: 150  -  total flux cleaned = -0.00250577 Jy
! Component: 200  -  total flux cleaned = -0.00251 Jy
! Total flux subtracted in 200 components = -0.00251 Jy
! Clean residual min=-0.005608 max=0.005538 Jy/beam
! Clean residual mean=-0.000002 rms=0.000944 Jy/beam
! Combined flux in latest and established models = 0.676228 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 70 components and 0.676228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.046471Jy  sigma=0.628813
! Fit after  self-cal, rms=0.046207Jy  sigma=0.627359
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000258347 Jy
! Component: 100  -  total flux cleaned = -0.000110227 Jy
! Component: 150  -  total flux cleaned = 2.62759e-05 Jy
! Component: 200  -  total flux cleaned = 9.20505e-05 Jy
! Total flux subtracted in 200 components = 9.20505e-05 Jy
! Clean residual min=-0.005372 max=0.005093 Jy/beam
! Clean residual mean=-0.000002 rms=0.000927 Jy/beam
! Combined flux in latest and established models = 0.67632 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 72 components and 0.67632 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045755Jy  sigma=0.624153
! Fit after  self-cal, rms=0.045491Jy  sigma=0.623246
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045491Jy  sigma=0.623246
! Fit after  self-cal, rms=0.045455Jy  sigma=0.622094
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.255 mas, bmaj=3.007 mas, bpa=-47.65 degrees
! Estimated noise=0.834278 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00186145 Jy
! Component: 100  -  total flux cleaned = -0.00192204 Jy
! Component: 150  -  total flux cleaned = -0.00204136 Jy
! Component: 200  -  total flux cleaned = -0.00215672 Jy
! Total flux subtracted in 200 components = -0.00215672 Jy
! Clean residual min=-0.005443 max=0.004753 Jy/beam
! Clean residual mean=-0.000002 rms=0.000905 Jy/beam
! Combined flux in latest and established models = 0.674163 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 77 components and 0.674163 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045110Jy  sigma=0.618609
! Fit after  self-cal, rms=0.044857Jy  sigma=0.617860
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000272755 Jy
! Component: 100  -  total flux cleaned = -0.000216406 Jy
! Component: 150  -  total flux cleaned = -0.000163483 Jy
! Component: 200  -  total flux cleaned = -0.000165063 Jy
! Total flux subtracted in 200 components = -0.000165063 Jy
! Clean residual min=-0.005199 max=0.004518 Jy/beam
! Clean residual mean=-0.000002 rms=0.000895 Jy/beam
! Combined flux in latest and established models = 0.673998 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 79 components and 0.673998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044659Jy  sigma=0.615260
! Fit after  self-cal, rms=0.044434Jy  sigma=0.614645
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044434Jy  sigma=0.614645
! Fit after  self-cal, rms=0.044429Jy  sigma=0.613835
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.651 mas, bmaj=3.462 mas, bpa=-63.94 degrees
! Estimated noise=0.810638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00197491 Jy
! Component: 100  -  total flux cleaned = -0.00217192 Jy
! Component: 150  -  total flux cleaned = -0.00209599 Jy
! Component: 200  -  total flux cleaned = -0.00202907 Jy
! Total flux subtracted in 200 components = -0.00202907 Jy
! Clean residual min=-0.003544 max=0.003421 Jy/beam
! Clean residual mean=-0.000003 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.671969 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 85 components and 0.671969 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044359Jy  sigma=0.612600
! Fit after  self-cal, rms=0.044256Jy  sigma=0.612299
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.78072e-06 Jy
! Component: 100  -  total flux cleaned = -8.12375e-06 Jy
! Component: 150  -  total flux cleaned = -9.87284e-06 Jy
! Component: 200  -  total flux cleaned = 4.82087e-05 Jy
! Total flux subtracted in 200 components = 4.82087e-05 Jy
! Clean residual min=-0.003550 max=0.003442 Jy/beam
! Clean residual mean=-0.000003 rms=0.000881 Jy/beam
! Combined flux in latest and established models = 0.672017 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 90 components and 0.672017 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.044242Jy  sigma=0.612033
! Fit after  self-cal, rms=0.044124Jy  sigma=0.611836
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.253 mas, bmaj=3.007 mas, bpa=-47.65 degrees
! Estimated noise=0.833382 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.253 x 3.007 at -47.65 degrees (North through East)
! Clean map  min=-0.011577  max=0.47597 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8411 mas, bmaj=2.747 mas, bpa=-45.74 degrees
! Estimated noise=1.47312 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.365709 Jy
! Component: 100  -  total flux cleaned = 0.499384 Jy
! Component: 150  -  total flux cleaned = 0.56944 Jy
! Component: 200  -  total flux cleaned = 0.608396 Jy
! Total flux subtracted in 200 components = 0.608396 Jy
! Clean residual min=-0.016580 max=0.019846 Jy/beam
! Clean residual mean=0.000010 rms=0.002887 Jy/beam
! Combined flux in latest and established models = 0.608396 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.608396 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.253 mas, bmaj=3.007 mas, bpa=-47.65 degrees
! Estimated noise=0.833382 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0327805 Jy
! Component: 100  -  total flux cleaned = 0.0475102 Jy
! Component: 150  -  total flux cleaned = 0.0505165 Jy
! Component: 200  -  total flux cleaned = 0.0524845 Jy
! Total flux subtracted in 200 components = 0.0524845 Jy
! Clean residual min=-0.005868 max=0.005214 Jy/beam
! Clean residual mean=0.000003 rms=0.001180 Jy/beam
! Combined flux in latest and established models = 0.66088 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 46 components and 0.66088 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.651 mas, bmaj=3.462 mas, bpa=-63.94 degrees
! Estimated noise=0.810638 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00621552 Jy
! Component: 100  -  total flux cleaned = 0.00911823 Jy
! Component: 150  -  total flux cleaned = 0.00963444 Jy
! Component: 200  -  total flux cleaned = 0.0100104 Jy
! Total flux subtracted in 200 components = 0.0100104 Jy
! Clean residual min=-0.003670 max=0.003282 Jy/beam
! Clean residual mean=-0.000002 rms=0.000887 Jy/beam
! Combined flux in latest and established models = 0.670891 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000243432 Jy
! Component: 100  -  total flux cleaned = 0.000406735 Jy
! Component: 150  -  total flux cleaned = 0.000490718 Jy
! Component: 200  -  total flux cleaned = 0.000514236 Jy
! Total flux subtracted in 200 components = 0.000514236 Jy
! Clean residual min=-0.003592 max=0.003286 Jy/beam
! Clean residual mean=-0.000002 rms=0.000872 Jy/beam
! Combined flux in latest and established models = 0.671405 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 81 components and 0.671405 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.253 mas, bmaj=3.007 mas, bpa=-47.65 degrees
! Estimated noise=0.833382 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00148468 Jy
! Component: 100  -  total flux cleaned = -0.00147884 Jy
! Component: 150  -  total flux cleaned = -0.00135547 Jy
! Component: 200  -  total flux cleaned = -0.00123774 Jy
! Total flux subtracted in 200 components = -0.00123774 Jy
! Clean residual min=-0.005663 max=0.005764 Jy/beam
! Clean residual mean=-0.000001 rms=0.000914 Jy/beam
! Combined flux in latest and established models = 0.670167 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 86 components and 0.670167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.045821Jy  sigma=0.625194
! Fit after  self-cal, rms=0.044466Jy  sigma=0.615085
wmodel ./0753+5352_X_map.mod
! Writing 86 model components to file: ./0753+5352_X_map.mod
wobs ./0753+5352_X_uvs.fits
! Writing UV FITS file: ./0753+5352_X_uvs.fits
wwins ./0753+5352_X_map.win
! wwins: Wrote 1 windows to ./0753+5352_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00108532 Jy
! Component: 100  -  total flux cleaned = -0.00132607 Jy
! Component: 150  -  total flux cleaned = -0.0014013 Jy
! Component: 200  -  total flux cleaned = -0.00132918 Jy
! Component: 250  -  total flux cleaned = -0.00167036 Jy
! Component: 300  -  total flux cleaned = -0.00199756 Jy
! Component: 350  -  total flux cleaned = -0.00237611 Jy
! Component: 400  -  total flux cleaned = -0.00261886 Jy
! Component: 450  -  total flux cleaned = -0.00291394 Jy
! Component: 500  -  total flux cleaned = -0.00320058 Jy
! Component: 550  -  total flux cleaned = -0.00331222 Jy
! Component: 600  -  total flux cleaned = -0.00347485 Jy
! Component: 650  -  total flux cleaned = -0.00368449 Jy
! Component: 700  -  total flux cleaned = -0.00373555 Jy
! Component: 750  -  total flux cleaned = -0.00398621 Jy
! Component: 800  -  total flux cleaned = -0.00403544 Jy
! Component: 850  -  total flux cleaned = -0.00422701 Jy
! Component: 900  -  total flux cleaned = -0.00455532 Jy
! Component: 950  -  total flux cleaned = -0.00483096 Jy
! Component: 1000  -  total flux cleaned = -0.00519152 Jy
! Component: 1050  -  total flux cleaned = -0.00541269 Jy
! Component: 1100  -  total flux cleaned = -0.00576205 Jy
! Component: 1150  -  total flux cleaned = -0.00614789 Jy
! Component: 1200  -  total flux cleaned = -0.00640166 Jy
! Component: 1250  -  total flux cleaned = -0.00669335 Jy
! Component: 1300  -  total flux cleaned = -0.00702161 Jy
! Component: 1350  -  total flux cleaned = -0.00726424 Jy
! Component: 1400  -  total flux cleaned = -0.00758354 Jy
! Component: 1450  -  total flux cleaned = -0.00793798 Jy
! Component: 1500  -  total flux cleaned = -0.0082093 Jy
! Component: 1550  -  total flux cleaned = -0.00859202 Jy
! Component: 1600  -  total flux cleaned = -0.00885639 Jy
! Component: 1650  -  total flux cleaned = -0.00915517 Jy
! Component: 1700  -  total flux cleaned = -0.00945045 Jy
! Component: 1750  -  total flux cleaned = -0.00981508 Jy
! Component: 1800  -  total flux cleaned = -0.0100674 Jy
! Component: 1850  -  total flux cleaned = -0.0103878 Jy
! Component: 1900  -  total flux cleaned = -0.0106694 Jy
! Component: 1950  -  total flux cleaned = -0.0109127 Jy
! Component: 2000  -  total flux cleaned = -0.0110512 Jy
! Component: 2050  -  total flux cleaned = -0.0112566 Jy
! Component: 2100  -  total flux cleaned = -0.0114932 Jy
! Component: 2150  -  total flux cleaned = -0.0116608 Jy
! Component: 2200  -  total flux cleaned = -0.0117933 Jy
! Component: 2250  -  total flux cleaned = -0.0120231 Jy
! Component: 2300  -  total flux cleaned = -0.0120886 Jy
! Component: 2350  -  total flux cleaned = -0.0123138 Jy
! Component: 2400  -  total flux cleaned = -0.0125049 Jy
! Component: 2450  -  total flux cleaned = -0.0125684 Jy
! Component: 2500  -  total flux cleaned = -0.0126941 Jy
! Component: 2550  -  total flux cleaned = -0.0129425 Jy
! Component: 2600  -  total flux cleaned = -0.0130656 Jy
! Component: 2650  -  total flux cleaned = -0.013279 Jy
! Component: 2700  -  total flux cleaned = -0.0134001 Jy
! Component: 2750  -  total flux cleaned = -0.0136398 Jy
! Component: 2800  -  total flux cleaned = -0.0137881 Jy
! Component: 2850  -  total flux cleaned = -0.0139353 Jy
! Component: 2900  -  total flux cleaned = -0.0140816 Jy
! Component: 2950  -  total flux cleaned = -0.0142268 Jy
! Component: 3000  -  total flux cleaned = -0.014457 Jy
! Component: 3050  -  total flux cleaned = -0.0145144 Jy
! Component: 3100  -  total flux cleaned = -0.0146278 Jy
! Component: 3150  -  total flux cleaned = -0.0148807 Jy
! Component: 3200  -  total flux cleaned = -0.0151316 Jy
! Component: 3250  -  total flux cleaned = -0.0151867 Jy
! Component: 3300  -  total flux cleaned = -0.0153241 Jy
! Component: 3350  -  total flux cleaned = -0.0155147 Jy
! Component: 3400  -  total flux cleaned = -0.0156229 Jy
! Component: 3450  -  total flux cleaned = -0.015784 Jy
! Component: 3500  -  total flux cleaned = -0.0158908 Jy
! Component: 3550  -  total flux cleaned = -0.0161558 Jy
! Component: 3600  -  total flux cleaned = -0.0163135 Jy
! Component: 3650  -  total flux cleaned = -0.0163918 Jy
! Component: 3700  -  total flux cleaned = -0.016651 Jy
! Component: 3750  -  total flux cleaned = -0.0167798 Jy
! Component: 3800  -  total flux cleaned = -0.0170356 Jy
! Component: 3850  -  total flux cleaned = -0.0171879 Jy
! Component: 3900  -  total flux cleaned = -0.0173898 Jy
! Component: 3950  -  total flux cleaned = -0.0175648 Jy
! Component: 4000  -  total flux cleaned = -0.0176894 Jy
! Component: 4050  -  total flux cleaned = -0.0178378 Jy
! Total flux subtracted in 4096 components = -0.0180835 Jy
! Clean residual min=-0.001313 max=0.001308 Jy/beam
! Clean residual mean=-0.000006 rms=0.000423 Jy/beam
! Combined flux in latest and established models = 0.652084 Jy
keep
! Adding 256 model components to the UV plane model.
! The established model now contains 341 components and 0.652084 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "./0753+5352_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.253 x 3.007 at -47.65 degrees (North through East)
! Clean map  min=-0.0093788  max=0.47609 Jy/beam
! Writing clean map to FITS file: ./0753+5352_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.476094 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000420687 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.265087 0.265087 0.530173 1.06035 2.12069 4.24139 8.48277 16.9655 33.9311 67.8622
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0012 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.476 
quit
! Quitting program
! Log file ./0753+5352_X_uvs.log closed on Thu Oct 17 23:09:45 2013