! Started logfile: /scr/pima/s3111c_uvs/J2359-3037_X_uvs.log on Tue Jul 24 09:24:40 2012
obs /scr/pima/s3111c_uvs/J2359-3037_X_uva.fits
! Reading UV FITS file: /scr/pima/s3111c_uvs/J2359-3037_X_uva.fits
! AN table 1: 75 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.626667 visibilities/baseline/integration-bin.
! Found source: J2359-3037
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.41193e+09      1.6e+07          1      1.6e+07
!  02        2  8.42793e+09      1.6e+07          1      1.6e+07
!  03        3  8.52393e+09      1.6e+07          1      1.6e+07
!  04        4  8.57193e+09      1.6e+07          1      1.6e+07
!  05        5  8.65193e+09      1.6e+07          1      1.6e+07
!  06        6  8.82793e+09      1.6e+07          1      1.6e+07
!  07        7  8.85993e+09      1.6e+07          1      1.6e+07
!  08        8  8.89193e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 16920 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.1 
print "taper_size =",taper_size
! taper_size = 120 
![@/home/lpetrov/bin/01_muppet /scr/pima/s3111c_uvs/J2359-3037_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.100x0.100 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 189 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 87 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002699Jy  sigma=0.709016
! Fit after  self-cal, rms=0.977664Jy  sigma=0.691314
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8473 mas, bmaj=2.688 mas, bpa=11.53 degrees
! Estimated noise=15.7969 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0163494 Jy
! Component: 100  -  total flux cleaned = 0.0203389 Jy
! Total flux subtracted in 100 components = 0.0203389 Jy
! Clean residual min=-0.002609 max=0.002661 Jy/beam
! Clean residual mean=0.000083 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.0203389 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 15 components and 0.0203389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.040459Jy  sigma=0.028609
! Fit after  self-cal, rms=0.038087Jy  sigma=0.026931
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00526593 Jy
! Component: 100  -  total flux cleaned = 0.00696068 Jy
! Total flux subtracted in 100 components = 0.00696068 Jy
! Clean residual min=-0.002458 max=0.002629 Jy/beam
! Clean residual mean=0.000045 rms=0.000656 Jy/beam
! Combined flux in latest and established models = 0.0272996 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 29 components and 0.0272996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037281Jy  sigma=0.026362
! Fit after  self-cal, rms=0.037265Jy  sigma=0.026350
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.05 mas, bmaj=3.093 mas, bpa=5.116 degrees
! Estimated noise=7.83621 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00158115 Jy
! Component: 100  -  total flux cleaned = 0.00224631 Jy
! Component: 150  -  total flux cleaned = 0.0023309 Jy
! Component: 200  -  total flux cleaned = 0.00240174 Jy
! Total flux subtracted in 200 components = 0.00240174 Jy
! Clean residual min=-0.002042 max=0.002472 Jy/beam
! Clean residual mean=0.000080 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.0297014 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 44 components and 0.0297014 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037203Jy  sigma=0.026306
! Fit after  self-cal, rms=0.037188Jy  sigma=0.026296
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.84     FD        1.07     GB        1.15     HN        0.89     
!   KP        0.98     LA        1.04     NL        1.63     OV        1.07     
!   PT        1.02     SC        1.11     
! 
! 
! Correcting IF 2.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.92     FD        0.99     GB        1.10     HN        0.84     
!   KP        0.98     LA        0.96     NL        1.50     OV        1.04     
!   PT        1.06     SC        1.15     
! 
! 
! Correcting IF 3.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        1.02     GB        1.20     HN        0.85     
!   KP        0.97     LA        0.97     NL        1.47     OV        1.04     
!   PT        0.99     SC        1.16     
! 
! 
! Correcting IF 4.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.97     GB        1.28     HN        0.88     
!   KP        0.89     LA        1.00     NL        1.63     OV        1.00     
!   PT        1.02     SC        1.20     
! 
! 
! Correcting IF 5.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        0.84     GB        1.32     HN        0.78     
!   KP        0.98     LA        1.01     NL        1.31     OV        1.02     
!   PT        1.05     SC        1.12     
! 
! 
! Correcting IF 6.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.67     FD        0.74     GB        1.57     HN        0.79     
!   KP        0.86     LA        0.98     NL        1.13     OV        0.94     
!   PT        1.02     SC        1.14     
! 
! 
! Correcting IF 7.
!  A total of 9 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.71     GB        1.71     HN        0.82     
!   KP        0.80     LA        0.96     NL        1.21     OV        0.90     
!   PT        1.00*    SC        1.01     
! 
! 
! Correcting IF 8.
!  A total of 6 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.79     FD        0.61     GB        1.71     HN        0.66     
!   KP        0.90     LA        1.02     NL        0.84     OV        0.93     
!   PT        1.05     SC        0.75     
! 
! 
! Fit before self-cal, rms=0.037188Jy  sigma=0.026296
! Fit after  self-cal, rms=0.035717Jy  sigma=0.025515
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.045 mas, bmaj=3.102 mas, bpa=4.564 degrees
! Estimated noise=7.84098 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000849559 Jy
! Component: 100  -  total flux cleaned = -0.00103123 Jy
! Component: 150  -  total flux cleaned = -0.00105601 Jy
! Component: 200  -  total flux cleaned = -0.00105621 Jy
! Total flux subtracted in 200 components = -0.00105621 Jy
! Clean residual min=-0.001307 max=0.001607 Jy/beam
! Clean residual mean=0.000033 rms=0.000478 Jy/beam
! Combined flux in latest and established models = 0.0286451 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 60 components and 0.0286451 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035680Jy  sigma=0.025509
! Fit after  self-cal, rms=0.036014Jy  sigma=0.025405
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036014Jy  sigma=0.025405
! Fit after  self-cal, rms=0.037811Jy  sigma=0.025289
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=3.069 mas, bpa=4.899 degrees
! Estimated noise=7.81896 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000389313 Jy
! Component: 100  -  total flux cleaned = -0.000477615 Jy
! Component: 150  -  total flux cleaned = -0.000546525 Jy
! Component: 200  -  total flux cleaned = -0.000592203 Jy
! Total flux subtracted in 200 components = -0.000592203 Jy
! Clean residual min=-0.001307 max=0.001679 Jy/beam
! Clean residual mean=0.000022 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.0280529 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 66 components and 0.0280529 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037785Jy  sigma=0.025287
! Fit after  self-cal, rms=0.037986Jy  sigma=0.025251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.17756e-05 Jy
! Component: 100  -  total flux cleaned = -0.000160783 Jy
! Component: 150  -  total flux cleaned = -0.000222263 Jy
! Component: 200  -  total flux cleaned = -0.00026269 Jy
! Total flux subtracted in 200 components = -0.00026269 Jy
! Clean residual min=-0.001196 max=0.001761 Jy/beam
! Clean residual mean=0.000030 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.0277902 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 70 components and 0.0277902 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037971Jy  sigma=0.025251
! Fit after  self-cal, rms=0.037973Jy  sigma=0.025247
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037973Jy  sigma=0.025247
! Fit after  self-cal, rms=0.039122Jy  sigma=0.025233
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.036 mas, bmaj=3.057 mas, bpa=5.35 degrees
! Estimated noise=7.81894 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000205817 Jy
! Component: 100  -  total flux cleaned = -0.00028386 Jy
! Component: 150  -  total flux cleaned = -0.00031451 Jy
! Component: 200  -  total flux cleaned = -0.000339968 Jy
! Total flux subtracted in 200 components = -0.000339968 Jy
! Clean residual min=-0.001213 max=0.001704 Jy/beam
! Clean residual mean=0.000026 rms=0.000427 Jy/beam
! Combined flux in latest and established models = 0.0274503 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 80 components and 0.0274503 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039101Jy  sigma=0.025233
! Fit after  self-cal, rms=0.039175Jy  sigma=0.025229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -4.42369e-05 Jy
! Component: 100  -  total flux cleaned = -0.000100139 Jy
! Component: 150  -  total flux cleaned = -0.000144032 Jy
! Component: 200  -  total flux cleaned = -0.000144027 Jy
! Total flux subtracted in 200 components = -0.000144027 Jy
! Clean residual min=-0.001179 max=0.001703 Jy/beam
! Clean residual mean=0.000030 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.0273063 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 87 components and 0.0273063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039164Jy  sigma=0.025229
! Fit after  self-cal, rms=0.039172Jy  sigma=0.025228
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039172Jy  sigma=0.025228
! Fit after  self-cal, rms=0.039558Jy  sigma=0.025222
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.372 mas, bmaj=3.701 mas, bpa=1.262 degrees
! Estimated noise=8.32529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000245115 Jy
! Component: 100  -  total flux cleaned = -0.000265687 Jy
! Component: 150  -  total flux cleaned = -0.000292146 Jy
! Component: 200  -  total flux cleaned = -0.000307109 Jy
! Total flux subtracted in 200 components = -0.000307109 Jy
! Clean residual min=-0.001377 max=0.001645 Jy/beam
! Clean residual mean=0.000036 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0269991 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 94 components and 0.0269991 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039543Jy  sigma=0.025223
! Fit after  self-cal, rms=0.039571Jy  sigma=0.025222
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -6.15156e-05 Jy
! Component: 100  -  total flux cleaned = -9.36012e-05 Jy
! Component: 150  -  total flux cleaned = -0.000100167 Jy
! Component: 200  -  total flux cleaned = -0.000106112 Jy
! Total flux subtracted in 200 components = -0.000106112 Jy
! Clean residual min=-0.001379 max=0.001642 Jy/beam
! Clean residual mean=0.000040 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.026893 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 98 components and 0.026893 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039562Jy  sigma=0.025223
! Fit after  self-cal, rms=0.039566Jy  sigma=0.025222
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=3.046 mas, bpa=5.692 degrees
! Estimated noise=7.8088 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.033 x 3.046 at 5.692 degrees (North through East)
! Clean map  min=-0.001764  max=0.027331 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.796 mas, bmaj=2.632 mas, bpa=12.71 degrees
! Estimated noise=15.6965 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0197266 Jy
! Component: 100  -  total flux cleaned = 0.0247355 Jy
! Component: 150  -  total flux cleaned = 0.0254281 Jy
! Component: 200  -  total flux cleaned = 0.0259922 Jy
! Total flux subtracted in 200 components = 0.0259922 Jy
! Clean residual min=-0.001808 max=0.001891 Jy/beam
! Clean residual mean=0.000015 rms=0.000603 Jy/beam
! Combined flux in latest and established models = 0.0259922 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 29 model components to the UV plane model.
! The established model now contains 29 components and 0.0259922 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=3.046 mas, bpa=5.692 degrees
! Estimated noise=7.8088 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00113903 Jy
! Component: 100  -  total flux cleaned = 0.00113993 Jy
! Component: 150  -  total flux cleaned = 0.00111999 Jy
! Component: 200  -  total flux cleaned = 0.00110229 Jy
! Total flux subtracted in 200 components = 0.00110229 Jy
! Clean residual min=-0.001289 max=0.001703 Jy/beam
! Clean residual mean=0.000027 rms=0.000437 Jy/beam
! Combined flux in latest and established models = 0.0270945 Jy
! Adding 17 model components to the UV plane model.
! The established model now contains 44 components and 0.0270945 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.372 mas, bmaj=3.701 mas, bpa=1.262 degrees
! Estimated noise=8.32529 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000171492 Jy
! Component: 100  -  total flux cleaned = -0.000196083 Jy
! Component: 150  -  total flux cleaned = -0.000217775 Jy
! Component: 200  -  total flux cleaned = -0.000237096 Jy
! Total flux subtracted in 200 components = -0.000237096 Jy
! Clean residual min=-0.001460 max=0.001654 Jy/beam
! Clean residual mean=0.000041 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.0268574 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.44705e-06 Jy
! Component: 100  -  total flux cleaned = -1.63112e-05 Jy
! Component: 150  -  total flux cleaned = -1.58366e-05 Jy
! Component: 200  -  total flux cleaned = -8.67305e-06 Jy
! Total flux subtracted in 200 components = -8.67305e-06 Jy
! Clean residual min=-0.001432 max=0.001632 Jy/beam
! Clean residual mean=0.000041 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0268487 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 63 components and 0.0268487 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.033 mas, bmaj=3.046 mas, bpa=5.692 degrees
! Estimated noise=7.8088 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.5285e-05 Jy
! Component: 100  -  total flux cleaned = 9.45112e-05 Jy
! Component: 150  -  total flux cleaned = 8.52699e-05 Jy
! Component: 200  -  total flux cleaned = 6.91214e-05 Jy
! Total flux subtracted in 200 components = 6.91214e-05 Jy
! Clean residual min=-0.001205 max=0.001684 Jy/beam
! Clean residual mean=0.000029 rms=0.000430 Jy/beam
! Combined flux in latest and established models = 0.0269178 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 73 components and 0.0269178 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.039575Jy  sigma=0.025231
! Fit after  self-cal, rms=0.039574Jy  sigma=0.025224
wmodel /scr/pima/s3111c_uvs/J2359-3037_X_map.mod
! Writing 73 model components to file: /scr/pima/s3111c_uvs/J2359-3037_X_map.mod
wobs /scr/pima/s3111c_uvs/J2359-3037_X_uvs.fits
! Writing UV FITS file: /scr/pima/s3111c_uvs/J2359-3037_X_uvs.fits
wwins /scr/pima/s3111c_uvs/J2359-3037_X_map.win
! wwins: Wrote 1 windows to /scr/pima/s3111c_uvs/J2359-3037_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000696748 Jy
! Component: 100  -  total flux cleaned = 0.0010371 Jy
! Component: 150  -  total flux cleaned = 0.00128342 Jy
! Component: 200  -  total flux cleaned = 0.00139944 Jy
! Component: 250  -  total flux cleaned = 0.00139907 Jy
! Component: 300  -  total flux cleaned = 0.00143466 Jy
! Component: 350  -  total flux cleaned = 0.00146882 Jy
! Component: 400  -  total flux cleaned = 0.00148491 Jy
! Component: 450  -  total flux cleaned = 0.00151712 Jy
! Component: 500  -  total flux cleaned = 0.00156441 Jy
! Component: 550  -  total flux cleaned = 0.00165676 Jy
! Component: 600  -  total flux cleaned = 0.00177665 Jy
! Component: 650  -  total flux cleaned = 0.00184988 Jy
! Component: 700  -  total flux cleaned = 0.00193587 Jy
! Component: 750  -  total flux cleaned = 0.00203447 Jy
! Component: 800  -  total flux cleaned = 0.00214486 Jy
! Component: 850  -  total flux cleaned = 0.00222588 Jy
! Component: 900  -  total flux cleaned = 0.00229225 Jy
! Component: 950  -  total flux cleaned = 0.00238358 Jy
! Component: 1000  -  total flux cleaned = 0.00248559 Jy
! Component: 1050  -  total flux cleaned = 0.00256067 Jy
! Component: 1100  -  total flux cleaned = 0.00262218 Jy
! Component: 1150  -  total flux cleaned = 0.00269505 Jy
! Component: 1200  -  total flux cleaned = 0.00277882 Jy
! Component: 1250  -  total flux cleaned = 0.00286129 Jy
! Component: 1300  -  total flux cleaned = 0.00293103 Jy
! Component: 1350  -  total flux cleaned = 0.00298836 Jy
! Component: 1400  -  total flux cleaned = 0.00304476 Jy
! Component: 1450  -  total flux cleaned = 0.00308937 Jy
! Component: 1500  -  total flux cleaned = 0.00314429 Jy
! Component: 1550  -  total flux cleaned = 0.00319851 Jy
! Component: 1600  -  total flux cleaned = 0.00325204 Jy
! Component: 1650  -  total flux cleaned = 0.00328384 Jy
! Component: 1700  -  total flux cleaned = 0.00337779 Jy
! Component: 1750  -  total flux cleaned = 0.003419 Jy
! Component: 1800  -  total flux cleaned = 0.00345976 Jy
! Component: 1850  -  total flux cleaned = 0.00350013 Jy
! Component: 1900  -  total flux cleaned = 0.00354996 Jy
! Component: 1950  -  total flux cleaned = 0.00361874 Jy
! Component: 2000  -  total flux cleaned = 0.00363818 Jy
! Total flux subtracted in 2048 components = 0.00370545 Jy
! Clean residual min=-0.000513 max=0.000535 Jy/beam
! Clean residual mean=0.000010 rms=0.000238 Jy/beam
! Combined flux in latest and established models = 0.0306233 Jy
keep
! Adding 212 model components to the UV plane model.
! The established model now contains 285 components and 0.0306233 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s3111c_uvs/J2359-3037_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.033 x 3.046 at 5.692 degrees (North through East)
! Clean map  min=-0.0018371  max=0.027128 Jy/beam
! Writing clean map to FITS file: /scr/pima/s3111c_uvs/J2359-3037_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0271281 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000237427 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -2.62562 2.62562 5.25125 10.5025 21.005 42.01 84.02
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0007 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.027 
quit
! Quitting program
! Log file /scr/pima/s3111c_uvs/J2359-3037_X_uvs.log closed on Tue Jul 24 09:24:42 2012