! Started logfile: /scr/pima/s3111c_uvs/J2029-1837_X_uvs.log on Tue Jul 24 09:24:14 2012
obs /scr/pima/s3111c_uvs/J2029-1837_X_uva.fits
! Reading UV FITS file: /scr/pima/s3111c_uvs/J2029-1837_X_uva.fits
! AN table 1: 71 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.756495 visibilities/baseline/integration-bin.
! Found source: J2029-1837
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.41193e+09      1.6e+07          1      1.6e+07
!  02        2  8.42793e+09      1.6e+07          1      1.6e+07
!  03        3  8.52393e+09      1.6e+07          1      1.6e+07
!  04        4  8.57193e+09      1.6e+07          1      1.6e+07
!  05        5  8.65193e+09      1.6e+07          1      1.6e+07
!  06        6  8.82793e+09      1.6e+07          1      1.6e+07
!  07        7  8.85993e+09      1.6e+07          1      1.6e+07
!  08        8  8.89193e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 19336 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.1 
print "taper_size =",taper_size
! taper_size = 120 
![@/home/lpetrov/bin/01_muppet /scr/pima/s3111c_uvs/J2029-1837_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.100x0.100 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 162 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 18 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002628Jy  sigma=0.708954
! Fit after  self-cal, rms=0.972942Jy  sigma=0.687964
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7859 mas, bmaj=2.927 mas, bpa=16.26 degrees
! Estimated noise=13.6012 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0208477 Jy
! Component: 100  -  total flux cleaned = 0.0259224 Jy
! Total flux subtracted in 100 components = 0.0259224 Jy
! Clean residual min=-0.002305 max=0.003357 Jy/beam
! Clean residual mean=0.000010 rms=0.000767 Jy/beam
! Combined flux in latest and established models = 0.0259224 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0259224 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035726Jy  sigma=0.025262
! Fit after  self-cal, rms=0.031538Jy  sigma=0.022300
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00667547 Jy
! Component: 100  -  total flux cleaned = 0.00985004 Jy
! Total flux subtracted in 100 components = 0.00985004 Jy
! Clean residual min=-0.001542 max=0.002989 Jy/beam
! Clean residual mean=-0.000006 rms=0.000490 Jy/beam
! Combined flux in latest and established models = 0.0357724 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 6 components and 0.0357725 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030039Jy  sigma=0.021240
! Fit after  self-cal, rms=0.030025Jy  sigma=0.021231
! Inverting map 
! Added new window around map position (1.6, 1).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00273716 Jy
! Component: 100  -  total flux cleaned = 0.00417092 Jy
! Total flux subtracted in 100 components = 0.00417092 Jy
! Clean residual min=-0.001354 max=0.001429 Jy/beam
! Clean residual mean=-0.000012 rms=0.000394 Jy/beam
! Combined flux in latest and established models = 0.0399434 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 20 components and 0.0399434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029758Jy  sigma=0.021041
! Fit after  self-cal, rms=0.029732Jy  sigma=0.021023
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9848 mas, bmaj=3.133 mas, bpa=13.35 degrees
! Estimated noise=7.3694 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00125886 Jy
! Component: 100  -  total flux cleaned = 0.00152623 Jy
! Component: 150  -  total flux cleaned = 0.001556 Jy
! Component: 200  -  total flux cleaned = 0.00156663 Jy
! Total flux subtracted in 200 components = 0.00156663 Jy
! Clean residual min=-0.000890 max=0.000980 Jy/beam
! Clean residual mean=-0.000029 rms=0.000258 Jy/beam
! Combined flux in latest and established models = 0.04151 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 42 components and 0.04151 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.029680Jy  sigma=0.020987
! Fit after  self-cal, rms=0.029673Jy  sigma=0.020982
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.11     GB        0.94     HN        1.02     
!   KP        1.03     LA        1.06     NL        1.09     OV        1.15     
!   PT        1.12     SC        1.04     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        1.12     GB        0.95     HN        0.98     
!   KP        0.99     LA        0.97     NL        1.06     OV        1.10     
!   PT        1.07     SC        1.03     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.12     GB        0.96     HN        0.96     
!   KP        1.02     LA        1.02     NL        1.07     OV        1.16     
!   PT        1.13     SC        1.10     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.07     GB        1.01     HN        1.05     
!   KP        0.97     LA        1.06     NL        1.08     OV        1.15     
!   PT        1.08     SC        1.07     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.93     GB        0.93     HN        0.97     
!   KP        0.97     LA        1.09     NL        1.02     OV        1.14     
!   PT        1.03     SC        1.08     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.90     FD        0.86     GB        0.99     HN        0.97     
!   KP        0.87     LA        1.04     NL        0.96     OV        1.04     
!   PT        1.03     SC        1.00     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.84     GB        1.02     HN        0.96     
!   KP        0.81     LA        1.03     NL        0.94     OV        1.05     
!   PT        1.00*    SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.87     FD        0.73     GB        0.90     HN        0.90     
!   KP        0.87     LA        0.96     NL        0.84     OV        0.93     
!   PT        0.96     SC        0.82     
! 
! 
! Fit before self-cal, rms=0.029673Jy  sigma=0.020982
! Fit after  self-cal, rms=0.027869Jy  sigma=0.020541
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.986 mas, bmaj=3.111 mas, bpa=13.27 degrees
! Estimated noise=7.31937 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000336502 Jy
! Component: 100  -  total flux cleaned = 0.000411987 Jy
! Component: 150  -  total flux cleaned = 0.0004253 Jy
! Component: 200  -  total flux cleaned = 0.000414348 Jy
! Total flux subtracted in 200 components = 0.000414348 Jy
! Clean residual min=-0.000464 max=0.000516 Jy/beam
! Clean residual mean=-0.000001 rms=0.000159 Jy/beam
! Combined flux in latest and established models = 0.0419243 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 72 components and 0.0419243 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027862Jy  sigma=0.020535
! Fit after  self-cal, rms=0.027894Jy  sigma=0.020524
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027894Jy  sigma=0.020524
! Fit after  self-cal, rms=0.027976Jy  sigma=0.020498
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9853 mas, bmaj=3.112 mas, bpa=13.31 degrees
! Estimated noise=7.32527 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000196145 Jy
! Component: 100  -  total flux cleaned = 0.000220508 Jy
! Component: 150  -  total flux cleaned = 0.000230723 Jy
! Component: 200  -  total flux cleaned = 0.000235092 Jy
! Total flux subtracted in 200 components = 0.000235092 Jy
! Clean residual min=-0.000408 max=0.000480 Jy/beam
! Clean residual mean=0.000000 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.0421594 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 89 components and 0.0421594 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027973Jy  sigma=0.020496
! Fit after  self-cal, rms=0.027982Jy  sigma=0.020495
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.9988e-05 Jy
! Component: 100  -  total flux cleaned = 2.43321e-05 Jy
! Component: 150  -  total flux cleaned = 3.16928e-05 Jy
! Component: 200  -  total flux cleaned = 3.83392e-05 Jy
! Total flux subtracted in 200 components = 3.83392e-05 Jy
! Clean residual min=-0.000409 max=0.000489 Jy/beam
! Clean residual mean=-0.000000 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.0421978 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 103 components and 0.0421978 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027981Jy  sigma=0.020494
! Fit after  self-cal, rms=0.027981Jy  sigma=0.020494
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027981Jy  sigma=0.020494
! Fit after  self-cal, rms=0.028021Jy  sigma=0.020490
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9846 mas, bmaj=3.112 mas, bpa=13.32 degrees
! Estimated noise=7.31978 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000113294 Jy
! Component: 100  -  total flux cleaned = 0.000121498 Jy
! Component: 150  -  total flux cleaned = 0.000132197 Jy
! Component: 200  -  total flux cleaned = 0.000138532 Jy
! Total flux subtracted in 200 components = 0.000138532 Jy
! Clean residual min=-0.000403 max=0.000475 Jy/beam
! Clean residual mean=0.000000 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0423363 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 108 components and 0.0423363 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028020Jy  sigma=0.020489
! Fit after  self-cal, rms=0.028023Jy  sigma=0.020489
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.22514e-06 Jy
! Component: 100  -  total flux cleaned = 1.04137e-05 Jy
! Component: 150  -  total flux cleaned = 1.33408e-05 Jy
! Component: 200  -  total flux cleaned = 1.86508e-05 Jy
! Total flux subtracted in 200 components = 1.86508e-05 Jy
! Clean residual min=-0.000405 max=0.000480 Jy/beam
! Clean residual mean=0.000000 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.042355 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 116 components and 0.0423549 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028023Jy  sigma=0.020489
! Fit after  self-cal, rms=0.028023Jy  sigma=0.020489
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028023Jy  sigma=0.020489
! Fit after  self-cal, rms=0.028018Jy  sigma=0.020487
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.322 mas, bmaj=3.394 mas, bpa=8.621 degrees
! Estimated noise=7.88505 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000118165 Jy
! Component: 100  -  total flux cleaned = 0.000138058 Jy
! Component: 150  -  total flux cleaned = 0.000147424 Jy
! Component: 200  -  total flux cleaned = 0.000151739 Jy
! Total flux subtracted in 200 components = 0.000151739 Jy
! Clean residual min=-0.000464 max=0.000429 Jy/beam
! Clean residual mean=-0.000000 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.0425067 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 131 components and 0.0425067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028018Jy  sigma=0.020487
! Fit after  self-cal, rms=0.028018Jy  sigma=0.020487
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.07657e-05 Jy
! Component: 100  -  total flux cleaned = 2.74096e-05 Jy
! Component: 150  -  total flux cleaned = 2.73944e-05 Jy
! Component: 200  -  total flux cleaned = 2.74982e-05 Jy
! Total flux subtracted in 200 components = 2.74982e-05 Jy
! Clean residual min=-0.000470 max=0.000433 Jy/beam
! Clean residual mean=-0.000000 rms=0.000146 Jy/beam
! Combined flux in latest and established models = 0.0425342 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 137 components and 0.0425342 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028018Jy  sigma=0.020487
! Fit after  self-cal, rms=0.028018Jy  sigma=0.020487
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9843 mas, bmaj=3.111 mas, bpa=13.33 degrees
! Estimated noise=7.31775 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9843 x 3.111 at 13.33 degrees (North through East)
! Clean map  min=-0.0005097  max=0.033432 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7832 mas, bmaj=2.905 mas, bpa=16.43 degrees
! Estimated noise=13.2423 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.024541 Jy
! Component: 100  -  total flux cleaned = 0.0314359 Jy
! Component: 150  -  total flux cleaned = 0.035322 Jy
! Component: 200  -  total flux cleaned = 0.0375953 Jy
! Total flux subtracted in 200 components = 0.0375953 Jy
! Clean residual min=-0.000804 max=0.001239 Jy/beam
! Clean residual mean=0.000005 rms=0.000308 Jy/beam
! Combined flux in latest and established models = 0.0375953 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.0375953 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9843 mas, bmaj=3.111 mas, bpa=13.33 degrees
! Estimated noise=7.31775 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00204348 Jy
! Component: 100  -  total flux cleaned = 0.00317285 Jy
! Component: 150  -  total flux cleaned = 0.00389799 Jy
! Component: 200  -  total flux cleaned = 0.00434432 Jy
! Total flux subtracted in 200 components = 0.00434432 Jy
! Clean residual min=-0.000416 max=0.000481 Jy/beam
! Clean residual mean=0.000003 rms=0.000162 Jy/beam
! Combined flux in latest and established models = 0.0419396 Jy
! Adding 47 model components to the UV plane model.
! The established model now contains 60 components and 0.0419396 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.322 mas, bmaj=3.394 mas, bpa=8.621 degrees
! Estimated noise=7.88505 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00032118 Jy
! Component: 100  -  total flux cleaned = 0.000438392 Jy
! Component: 150  -  total flux cleaned = 0.000519057 Jy
! Component: 200  -  total flux cleaned = 0.000535935 Jy
! Total flux subtracted in 200 components = 0.000535935 Jy
! Clean residual min=-0.000472 max=0.000436 Jy/beam
! Clean residual mean=-0.000000 rms=0.000151 Jy/beam
! Combined flux in latest and established models = 0.0424755 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.06628e-05 Jy
! Component: 100  -  total flux cleaned = 2.03744e-05 Jy
! Component: 150  -  total flux cleaned = 2.57334e-05 Jy
! Component: 200  -  total flux cleaned = 3.08027e-05 Jy
! Total flux subtracted in 200 components = 3.08027e-05 Jy
! Clean residual min=-0.000467 max=0.000431 Jy/beam
! Clean residual mean=-0.000000 rms=0.000148 Jy/beam
! Combined flux in latest and established models = 0.0425063 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 101 components and 0.0425063 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9843 mas, bmaj=3.111 mas, bpa=13.33 degrees
! Estimated noise=7.31775 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.0684e-05 Jy
! Component: 100  -  total flux cleaned = -7.5517e-05 Jy
! Component: 150  -  total flux cleaned = -7.53948e-05 Jy
! Component: 200  -  total flux cleaned = -7.12994e-05 Jy
! Total flux subtracted in 200 components = -7.12994e-05 Jy
! Clean residual min=-0.000426 max=0.000484 Jy/beam
! Clean residual mean=0.000001 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.042435 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 121 components and 0.042435 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028019Jy  sigma=0.020488
! Fit after  self-cal, rms=0.028019Jy  sigma=0.020488
wmodel /scr/pima/s3111c_uvs/J2029-1837_X_map.mod
! Writing 121 model components to file: /scr/pima/s3111c_uvs/J2029-1837_X_map.mod
wobs /scr/pima/s3111c_uvs/J2029-1837_X_uvs.fits
! Writing UV FITS file: /scr/pima/s3111c_uvs/J2029-1837_X_uvs.fits
wwins /scr/pima/s3111c_uvs/J2029-1837_X_map.win
! wwins: Wrote 2 windows to /scr/pima/s3111c_uvs/J2029-1837_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.80804e-05 Jy
! Component: 100  -  total flux cleaned = 0.000103118 Jy
! Component: 150  -  total flux cleaned = 6.17818e-05 Jy
! Component: 200  -  total flux cleaned = 3.56189e-05 Jy
! Component: 250  -  total flux cleaned = -2.1055e-05 Jy
! Component: 300  -  total flux cleaned = -4.5293e-05 Jy
! Component: 350  -  total flux cleaned = -7.45497e-05 Jy
! Component: 400  -  total flux cleaned = -9.69987e-05 Jy
! Component: 450  -  total flux cleaned = -9.69036e-05 Jy
! Component: 500  -  total flux cleaned = -0.000102245 Jy
! Component: 550  -  total flux cleaned = -0.000102185 Jy
! Component: 600  -  total flux cleaned = -8.69692e-05 Jy
! Component: 650  -  total flux cleaned = -8.7003e-05 Jy
! Component: 700  -  total flux cleaned = -8.21778e-05 Jy
! Component: 750  -  total flux cleaned = -8.68447e-05 Jy
! Component: 800  -  total flux cleaned = -8.21683e-05 Jy
! Component: 850  -  total flux cleaned = -8.2187e-05 Jy
! Component: 900  -  total flux cleaned = -8.22287e-05 Jy
! Component: 950  -  total flux cleaned = -7.3641e-05 Jy
! Component: 1000  -  total flux cleaned = -8.64849e-05 Jy
! Component: 1050  -  total flux cleaned = -8.23398e-05 Jy
! Component: 1100  -  total flux cleaned = -8.23288e-05 Jy
! Component: 1150  -  total flux cleaned = -7.8268e-05 Jy
! Component: 1200  -  total flux cleaned = -7.82594e-05 Jy
! Component: 1250  -  total flux cleaned = -7.05598e-05 Jy
! Component: 1300  -  total flux cleaned = -5.5363e-05 Jy
! Component: 1350  -  total flux cleaned = -5.54438e-05 Jy
! Component: 1400  -  total flux cleaned = -4.43903e-05 Jy
! Component: 1450  -  total flux cleaned = -4.43586e-05 Jy
! Component: 1500  -  total flux cleaned = -2.99526e-05 Jy
! Component: 1550  -  total flux cleaned = -2.64671e-05 Jy
! Component: 1600  -  total flux cleaned = -1.59531e-05 Jy
! Component: 1650  -  total flux cleaned = -9.02084e-06 Jy
! Component: 1700  -  total flux cleaned = 8.0043e-06 Jy
! Component: 1750  -  total flux cleaned = 2.14418e-05 Jy
! Component: 1800  -  total flux cleaned = 3.80792e-05 Jy
! Component: 1850  -  total flux cleaned = 5.11948e-05 Jy
! Component: 1900  -  total flux cleaned = 5.76716e-05 Jy
! Component: 1950  -  total flux cleaned = 7.36773e-05 Jy
! Component: 2000  -  total flux cleaned = 8.62471e-05 Jy
! Total flux subtracted in 2048 components = 8.93999e-05 Jy
! Clean residual min=-0.000164 max=0.000203 Jy/beam
! Clean residual mean=-0.000001 rms=0.000072 Jy/beam
! Combined flux in latest and established models = 0.0425244 Jy
keep
! Adding 159 model components to the UV plane model.
! The established model now contains 280 components and 0.0425244 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s3111c_uvs/J2029-1837_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9843 x 3.111 at 13.33 degrees (North through East)
! Clean map  min=-0.00038536  max=0.033406 Jy/beam
! Writing clean map to FITS file: /scr/pima/s3111c_uvs/J2029-1837_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0334059 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.15827e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.642845 0.642845 1.28569 2.57138 5.14276 10.2855 20.571 41.1421 82.2842
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.033 
quit
! Quitting program
! Log file /scr/pima/s3111c_uvs/J2029-1837_X_uvs.log closed on Tue Jul 24 09:24:16 2012