! Started logfile: /scr/pima/s3111c_uvs/J1737+8717_X_uvs.log on Tue Jul 24 09:23:58 2012
obs /scr/pima/s3111c_uvs/J1737+8717_X_uva.fits
! Reading UV FITS file: /scr/pima/s3111c_uvs/J1737+8717_X_uva.fits
! AN table 1: 82 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.727913 visibilities/baseline/integration-bin.
! Found source: J1737+8717
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.41193e+09      1.6e+07          1      1.6e+07
!  02        2  8.42793e+09      1.6e+07          1      1.6e+07
!  03        3  8.52393e+09      1.6e+07          1      1.6e+07
!  04        4  8.57193e+09      1.6e+07          1      1.6e+07
!  05        5  8.65193e+09      1.6e+07          1      1.6e+07
!  06        6  8.82793e+09      1.6e+07          1      1.6e+07
!  07        7  8.85993e+09      1.6e+07          1      1.6e+07
!  08        8  8.89193e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 21488 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.1 
print "taper_size =",taper_size
! taper_size = 120 
![@/home/lpetrov/bin/01_muppet /scr/pima/s3111c_uvs/J1737+8717_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.100x0.100 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 201 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 42 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001478Jy  sigma=0.708150
! Fit after  self-cal, rms=0.985175Jy  sigma=0.696623
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8512 mas, bmaj=2.39 mas, bpa=-33.31 degrees
! Estimated noise=17.5042 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0126677 Jy
! Component: 100  -  total flux cleaned = 0.0155154 Jy
! Total flux subtracted in 100 components = 0.0155154 Jy
! Clean residual min=-0.001935 max=0.002198 Jy/beam
! Clean residual mean=-0.000013 rms=0.000600 Jy/beam
! Combined flux in latest and established models = 0.0155154 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0155154 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030662Jy  sigma=0.021681
! Fit after  self-cal, rms=0.028197Jy  sigma=0.019938
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0042499 Jy
! Component: 100  -  total flux cleaned = 0.0055698 Jy
! Total flux subtracted in 100 components = 0.0055698 Jy
! Clean residual min=-0.001745 max=0.002050 Jy/beam
! Clean residual mean=-0.000011 rms=0.000541 Jy/beam
! Combined flux in latest and established models = 0.0210852 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 15 components and 0.0210852 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027750Jy  sigma=0.019622
! Fit after  self-cal, rms=0.027745Jy  sigma=0.019619
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.042 mas, bmaj=2.723 mas, bpa=-33.79 degrees
! Estimated noise=7.01258 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000552348 Jy
! Component: 100  -  total flux cleaned = 0.0005736 Jy
! Component: 150  -  total flux cleaned = 0.000586128 Jy
! Component: 200  -  total flux cleaned = 0.000568081 Jy
! Total flux subtracted in 200 components = 0.000568081 Jy
! Clean residual min=-0.001115 max=0.001609 Jy/beam
! Clean residual mean=-0.000026 rms=0.000370 Jy/beam
! Combined flux in latest and established models = 0.0216533 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 39 components and 0.0216533 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027720Jy  sigma=0.019601
! Fit after  self-cal, rms=0.027711Jy  sigma=0.019595
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.11     GB        1.19     HN        0.94     
!   KP        1.07     LA        1.13     NL        0.99     OV        1.04     
!   PT        1.26     SC        1.06     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.04     GB        1.12     HN        1.02     
!   KP        1.00     LA        1.21     NL        1.02     OV        1.09     
!   PT        1.18     SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.11     FD        1.10     GB        1.23     HN        0.88     
!   KP        1.04     LA        1.08     NL        1.12     OV        1.09     
!   PT        1.12     SC        1.16     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        1.06     GB        1.26     HN        0.96     
!   KP        0.99     LA        1.15     NL        1.12     OV        1.07     
!   PT        1.15     SC        1.13     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.84     GB        1.26     HN        0.86     
!   KP        1.07     LA        1.05     NL        0.95     OV        0.92     
!   PT        1.21     SC        1.06     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.88     FD        0.75     GB        1.37     HN        0.86     
!   KP        0.99     LA        1.06     NL        0.90     OV        0.86     
!   PT        1.10     SC        0.96     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.66     GB        1.47     HN        0.94     
!   KP        0.83     LA        1.10     NL        0.88     OV        0.83     
!   PT        1.00*    SC        0.96     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.75     FD        0.57     GB        1.26     HN        0.82     
!   KP        0.90     LA        1.01     NL        0.77     OV        0.89     
!   PT        1.02     SC        0.79     
! 
! 
! Fit before self-cal, rms=0.027711Jy  sigma=0.019595
! Fit after  self-cal, rms=0.025818Jy  sigma=0.019201
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.036 mas, bmaj=2.685 mas, bpa=-33.75 degrees
! Estimated noise=6.99787 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-12.1, -5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0011206 Jy
! Component: 100  -  total flux cleaned = 0.00178035 Jy
! Component: 150  -  total flux cleaned = 0.00231165 Jy
! Component: 200  -  total flux cleaned = 0.00274713 Jy
! Total flux subtracted in 200 components = 0.00274713 Jy
! Clean residual min=-0.000622 max=0.000604 Jy/beam
! Clean residual mean=-0.000009 rms=0.000175 Jy/beam
! Combined flux in latest and established models = 0.0244004 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 92 components and 0.0244004 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025755Jy  sigma=0.019163
! Fit after  self-cal, rms=0.025835Jy  sigma=0.019091
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025835Jy  sigma=0.019091
! Fit after  self-cal, rms=0.026190Jy  sigma=0.019053
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=2.691 mas, bpa=-33.7 degrees
! Estimated noise=7.00264 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000692225 Jy
! Component: 100  -  total flux cleaned = 0.00116924 Jy
! Component: 150  -  total flux cleaned = 0.00156167 Jy
! Component: 200  -  total flux cleaned = 0.00189259 Jy
! Total flux subtracted in 200 components = 0.00189259 Jy
! Clean residual min=-0.000534 max=0.000566 Jy/beam
! Clean residual mean=-0.000007 rms=0.000154 Jy/beam
! Combined flux in latest and established models = 0.026293 Jy
selfcal
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 128 components and 0.026293 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026162Jy  sigma=0.019036
! Fit after  self-cal, rms=0.026214Jy  sigma=0.019015
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000471192 Jy
! Component: 100  -  total flux cleaned = 0.000839212 Jy
! Component: 150  -  total flux cleaned = 0.00111624 Jy
! Component: 200  -  total flux cleaned = 0.00132354 Jy
! Total flux subtracted in 200 components = 0.00132354 Jy
! Clean residual min=-0.000482 max=0.000511 Jy/beam
! Clean residual mean=-0.000010 rms=0.000148 Jy/beam
! Combined flux in latest and established models = 0.0276165 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 145 components and 0.0276165 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026199Jy  sigma=0.019006
! Fit after  self-cal, rms=0.026199Jy  sigma=0.019003
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026199Jy  sigma=0.019003
! Fit after  self-cal, rms=0.026299Jy  sigma=0.018993
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.04 mas, bmaj=2.692 mas, bpa=-33.73 degrees
! Estimated noise=6.97691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000340137 Jy
! Component: 100  -  total flux cleaned = 0.00056732 Jy
! Component: 150  -  total flux cleaned = 0.000764179 Jy
! Component: 200  -  total flux cleaned = 0.000946538 Jy
! Total flux subtracted in 200 components = 0.000946538 Jy
! Clean residual min=-0.000442 max=0.000528 Jy/beam
! Clean residual mean=-0.000007 rms=0.000140 Jy/beam
! Combined flux in latest and established models = 0.0285631 Jy
selfcal
! Performing phase self-cal
! Adding 40 model components to the UV plane model.
! The established model now contains 162 components and 0.0285631 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026290Jy  sigma=0.018987
! Fit after  self-cal, rms=0.026324Jy  sigma=0.018980
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000269036 Jy
! Component: 100  -  total flux cleaned = 0.00043103 Jy
! Component: 150  -  total flux cleaned = 0.000556915 Jy
! Component: 200  -  total flux cleaned = 0.000676551 Jy
! Total flux subtracted in 200 components = 0.000676551 Jy
! Clean residual min=-0.000446 max=0.000491 Jy/beam
! Clean residual mean=-0.000010 rms=0.000135 Jy/beam
! Combined flux in latest and established models = 0.0292396 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 171 components and 0.0292396 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026317Jy  sigma=0.018976
! Fit after  self-cal, rms=0.026315Jy  sigma=0.018973
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026315Jy  sigma=0.018973
! Fit after  self-cal, rms=0.026413Jy  sigma=0.018969
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.352 mas, bmaj=2.982 mas, bpa=-33.12 degrees
! Estimated noise=7.44879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000330832 Jy
! Component: 100  -  total flux cleaned = 0.000571419 Jy
! Component: 150  -  total flux cleaned = 0.000702812 Jy
! Component: 200  -  total flux cleaned = 0.000782305 Jy
! Total flux subtracted in 200 components = 0.000782305 Jy
! Clean residual min=-0.000421 max=0.000516 Jy/beam
! Clean residual mean=-0.000011 rms=0.000148 Jy/beam
! Combined flux in latest and established models = 0.0300219 Jy
selfcal
! Performing phase self-cal
! Adding 48 model components to the UV plane model.
! The established model now contains 206 components and 0.0300219 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026408Jy  sigma=0.018966
! Fit after  self-cal, rms=0.026427Jy  sigma=0.018963
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000217208 Jy
! Component: 100  -  total flux cleaned = 0.000326025 Jy
! Component: 150  -  total flux cleaned = 0.000402334 Jy
! Component: 200  -  total flux cleaned = 0.000469853 Jy
! Total flux subtracted in 200 components = 0.000469853 Jy
! Clean residual min=-0.000426 max=0.000489 Jy/beam
! Clean residual mean=-0.000012 rms=0.000144 Jy/beam
! Combined flux in latest and established models = 0.0304918 Jy
! Performing phase self-cal
! Adding 49 model components to the UV plane model.
! The established model now contains 228 components and 0.0304918 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026425Jy  sigma=0.018962
! Fit after  self-cal, rms=0.026424Jy  sigma=0.018960
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=2.69 mas, bpa=-33.74 degrees
! Estimated noise=6.97509 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.039 x 2.69 at -33.74 degrees (North through East)
! Clean map  min=-0.00042054  max=0.020011 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8489 mas, bmaj=2.372 mas, bpa=-33.54 degrees
! Estimated noise=16.8675 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0152984 Jy
! Component: 100  -  total flux cleaned = 0.018872 Jy
! Component: 150  -  total flux cleaned = 0.0205877 Jy
! Component: 200  -  total flux cleaned = 0.021812 Jy
! Total flux subtracted in 200 components = 0.021812 Jy
! Clean residual min=-0.001081 max=0.001302 Jy/beam
! Clean residual mean=0.000001 rms=0.000332 Jy/beam
! Combined flux in latest and established models = 0.021812 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 18 model components to the UV plane model.
! The established model now contains 18 components and 0.021812 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=2.69 mas, bpa=-33.74 degrees
! Estimated noise=6.97509 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00148379 Jy
! Component: 100  -  total flux cleaned = 0.00257114 Jy
! Component: 150  -  total flux cleaned = 0.00345768 Jy
! Component: 200  -  total flux cleaned = 0.00420169 Jy
! Total flux subtracted in 200 components = 0.00420169 Jy
! Clean residual min=-0.000587 max=0.000687 Jy/beam
! Clean residual mean=0.000003 rms=0.000197 Jy/beam
! Combined flux in latest and established models = 0.0260137 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 74 components and 0.0260137 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.352 mas, bmaj=2.982 mas, bpa=-33.12 degrees
! Estimated noise=7.44879 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000787409 Jy
! Component: 100  -  total flux cleaned = 0.00142189 Jy
! Component: 150  -  total flux cleaned = 0.00195072 Jy
! Component: 200  -  total flux cleaned = 0.00239516 Jy
! Total flux subtracted in 200 components = 0.00239516 Jy
! Clean residual min=-0.000478 max=0.000581 Jy/beam
! Clean residual mean=-0.000005 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.0284089 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000362447 Jy
! Component: 100  -  total flux cleaned = 0.000597844 Jy
! Component: 150  -  total flux cleaned = 0.000816513 Jy
! Component: 200  -  total flux cleaned = 0.00100927 Jy
! Total flux subtracted in 200 components = 0.00100927 Jy
! Clean residual min=-0.000453 max=0.000534 Jy/beam
! Clean residual mean=-0.000009 rms=0.000157 Jy/beam
! Combined flux in latest and established models = 0.0294181 Jy
! Adding 122 model components to the UV plane model.
! The established model now contains 181 components and 0.0294181 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.039 mas, bmaj=2.69 mas, bpa=-33.74 degrees
! Estimated noise=6.97509 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00016572 Jy
! Component: 100  -  total flux cleaned = 0.000313355 Jy
! Component: 150  -  total flux cleaned = 0.000453381 Jy
! Component: 200  -  total flux cleaned = 0.000588585 Jy
! Total flux subtracted in 200 components = 0.000588585 Jy
! Clean residual min=-0.000453 max=0.000482 Jy/beam
! Clean residual mean=-0.000009 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.0300067 Jy
selfcal
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 205 components and 0.0300067 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026427Jy  sigma=0.018964
! Fit after  self-cal, rms=0.026426Jy  sigma=0.018963
wmodel /scr/pima/s3111c_uvs/J1737+8717_X_map.mod
! Writing 205 model components to file: /scr/pima/s3111c_uvs/J1737+8717_X_map.mod
wobs /scr/pima/s3111c_uvs/J1737+8717_X_uvs.fits
! Writing UV FITS file: /scr/pima/s3111c_uvs/J1737+8717_X_uvs.fits
wwins /scr/pima/s3111c_uvs/J1737+8717_X_map.win
! wwins: Wrote 2 windows to /scr/pima/s3111c_uvs/J1737+8717_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000139519 Jy
! Component: 100  -  total flux cleaned = 0.000178886 Jy
! Component: 150  -  total flux cleaned = 0.000186403 Jy
! Component: 200  -  total flux cleaned = 0.000200174 Jy
! Component: 250  -  total flux cleaned = 0.000206572 Jy
! Component: 300  -  total flux cleaned = 0.000200108 Jy
! Component: 350  -  total flux cleaned = 0.000199985 Jy
! Component: 400  -  total flux cleaned = 0.000194304 Jy
! Component: 450  -  total flux cleaned = 0.000183235 Jy
! Component: 500  -  total flux cleaned = 0.00016199 Jy
! Component: 550  -  total flux cleaned = 0.000151746 Jy
! Component: 600  -  total flux cleaned = 0.000131561 Jy
! Component: 650  -  total flux cleaned = 0.000106963 Jy
! Component: 700  -  total flux cleaned = 0.000102255 Jy
! Component: 750  -  total flux cleaned = 7.87556e-05 Jy
! Component: 800  -  total flux cleaned = 5.11339e-05 Jy
! Component: 850  -  total flux cleaned = 3.31246e-05 Jy
! Component: 900  -  total flux cleaned = 1.53989e-05 Jy
! Component: 950  -  total flux cleaned = -1.06412e-05 Jy
! Component: 1000  -  total flux cleaned = -2.76225e-05 Jy
! Component: 1050  -  total flux cleaned = -4.85438e-05 Jy
! Component: 1100  -  total flux cleaned = -8.14298e-05 Jy
! Component: 1150  -  total flux cleaned = -0.000109687 Jy
! Component: 1200  -  total flux cleaned = -0.000137474 Jy
! Component: 1250  -  total flux cleaned = -0.000153125 Jy
! Component: 1300  -  total flux cleaned = -0.000187867 Jy
! Component: 1350  -  total flux cleaned = -0.000214439 Jy
! Component: 1400  -  total flux cleaned = -0.000236937 Jy
! Component: 1450  -  total flux cleaned = -0.000266559 Jy
! Component: 1500  -  total flux cleaned = -0.000288446 Jy
! Component: 1550  -  total flux cleaned = -0.000299299 Jy
! Component: 1600  -  total flux cleaned = -0.000334924 Jy
! Component: 1650  -  total flux cleaned = -0.0003525 Jy
! Component: 1700  -  total flux cleaned = -0.000376828 Jy
! Component: 1750  -  total flux cleaned = -0.000400855 Jy
! Component: 1800  -  total flux cleaned = -0.000424608 Jy
! Component: 1850  -  total flux cleaned = -0.000444697 Jy
! Component: 1900  -  total flux cleaned = -0.000464584 Jy
! Component: 1950  -  total flux cleaned = -0.000494063 Jy
! Component: 2000  -  total flux cleaned = -0.000513461 Jy
! Total flux subtracted in 2048 components = -0.000523109 Jy
! Clean residual min=-0.000167 max=0.000190 Jy/beam
! Clean residual mean=-0.000007 rms=0.000071 Jy/beam
! Combined flux in latest and established models = 0.0294836 Jy
keep
! Adding 125 model components to the UV plane model.
! The established model now contains 330 components and 0.0294836 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s3111c_uvs/J1737+8717_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.039 x 2.69 at -33.74 degrees (North through East)
! Clean map  min=-0.00039479  max=0.020002 Jy/beam
! Writing clean map to FITS file: /scr/pima/s3111c_uvs/J1737+8717_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0200022 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.16958e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.07532 1.07532 2.15064 4.30128 8.60257 17.2051 34.4103 68.8205
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.02 
quit
! Quitting program
! Log file /scr/pima/s3111c_uvs/J1737+8717_X_uvs.log closed on Tue Jul 24 09:24:00 2012