! Started logfile: /scr/pima/s3111c_uvs/J0045+2127_X_uvs.log on Tue Jul 24 09:20:59 2012
obs /scr/pima/s3111c_uvs/J0045+2127_X_uva.fits
! Reading UV FITS file: /scr/pima/s3111c_uvs/J0045+2127_X_uva.fits
! AN table 1: 128 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.683333 visibilities/baseline/integration-bin.
! Found source: J0045+2127
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.41193e+09      1.6e+07          1      1.6e+07
!  02        2  8.42793e+09      1.6e+07          1      1.6e+07
!  03        3  8.52393e+09      1.6e+07          1      1.6e+07
!  04        4  8.57193e+09      1.6e+07          1      1.6e+07
!  05        5  8.65193e+09      1.6e+07          1      1.6e+07
!  06        6  8.82793e+09      1.6e+07          1      1.6e+07
!  07        7  8.85993e+09      1.6e+07          1      1.6e+07
!  08        8  8.89193e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 31488 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.1 
print "taper_size =",taper_size
! taper_size = 120 
![@/home/lpetrov/bin/01_muppet /scr/pima/s3111c_uvs/J0045+2127_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.100x0.100 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 359 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 102 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.003218Jy  sigma=0.709381
! Fit after  self-cal, rms=0.959692Jy  sigma=0.678602
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8957 mas, bmaj=2.041 mas, bpa=17.09 degrees
! Estimated noise=12.7392 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0320353 Jy
! Component: 100  -  total flux cleaned = 0.039043 Jy
! Total flux subtracted in 100 components = 0.039043 Jy
! Clean residual min=-0.001953 max=0.002559 Jy/beam
! Clean residual mean=0.000019 rms=0.000505 Jy/beam
! Combined flux in latest and established models = 0.039043 Jy
! Performing phase self-cal
! Adding 2 model components to the UV plane model.
! The established model now contains 2 components and 0.039043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031817Jy  sigma=0.022498
! Fit after  self-cal, rms=0.030278Jy  sigma=0.021410
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00260506 Jy
! Component: 100  -  total flux cleaned = 0.00314592 Jy
! Total flux subtracted in 100 components = 0.00314592 Jy
! Clean residual min=-0.001621 max=0.002086 Jy/beam
! Clean residual mean=0.000015 rms=0.000461 Jy/beam
! Combined flux in latest and established models = 0.0421889 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 14 components and 0.0421889 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030084Jy  sigma=0.021272
! Fit after  self-cal, rms=0.030054Jy  sigma=0.021251
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=2.203 mas, bpa=14.74 degrees
! Estimated noise=5.77986 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00114829 Jy
! Component: 100  -  total flux cleaned = 0.0013309 Jy
! Component: 150  -  total flux cleaned = 0.00134755 Jy
! Component: 200  -  total flux cleaned = 0.0013989 Jy
! Total flux subtracted in 200 components = 0.0013989 Jy
! Clean residual min=-0.000970 max=0.001022 Jy/beam
! Clean residual mean=0.000016 rms=0.000292 Jy/beam
! Combined flux in latest and established models = 0.0435878 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 25 components and 0.0435878 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.030010Jy  sigma=0.021220
! Fit after  self-cal, rms=0.030007Jy  sigma=0.021218
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        1.10     GB        0.95     HN        0.98     
!   KP        1.00     LA        1.02     NL        1.05     OV        1.14     
!   PT        1.05     SC        1.05     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        1.18     GB        0.93     HN        1.03     
!   KP        0.97     LA        1.02     NL        1.05     OV        1.09     
!   PT        1.03     SC        1.03     
! 
! 
! Correcting IF 3.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        1.10     GB        0.97     HN        1.00     
!   KP        1.00     LA        1.03     NL        1.06     OV        1.13     
!   PT        1.05     SC        1.07     
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.09     GB        1.02     HN        1.01     
!   KP        0.93     LA        1.03     NL        1.06     OV        1.15     
!   PT        1.05     SC        1.10     
! 
! 
! Correcting IF 5.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.98     GB        0.95     HN        1.01     
!   KP        0.96     LA        0.94     NL        1.04     OV        1.13     
!   PT        1.01     SC        1.06     
! 
! 
! Correcting IF 6.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     FD        0.90     GB        1.04     HN        1.02     
!   KP        0.86     LA        0.97     NL        0.96     OV        1.04     
!   PT        0.98     SC        1.04     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.88     GB        1.10     HN        1.02     
!   KP        0.82     LA        1.00     NL        0.94     OV        1.07     
!   PT        1.00*    SC        0.97     
! 
! 
! Correcting IF 8.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        0.76     GB        0.98     HN        0.97     
!   KP        0.84     LA        0.93     NL        0.89     OV        0.97     
!   PT        0.95     SC        0.83     
! 
! 
! Fit before self-cal, rms=0.030007Jy  sigma=0.021218
! Fit after  self-cal, rms=0.028308Jy  sigma=0.020737
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.062 mas, bmaj=2.192 mas, bpa=14.46 degrees
! Estimated noise=5.78657 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000256853 Jy
! Component: 100  -  total flux cleaned = 0.00029221 Jy
! Component: 150  -  total flux cleaned = 0.000310551 Jy
! Component: 200  -  total flux cleaned = 0.000322047 Jy
! Total flux subtracted in 200 components = 0.000322047 Jy
! Clean residual min=-0.000786 max=0.000857 Jy/beam
! Clean residual mean=0.000003 rms=0.000228 Jy/beam
! Combined flux in latest and established models = 0.0439099 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 36 components and 0.0439098 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028305Jy  sigma=0.020734
! Fit after  self-cal, rms=0.028334Jy  sigma=0.020726
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028334Jy  sigma=0.020726
! Fit after  self-cal, rms=0.028513Jy  sigma=0.020677
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.06 mas, bmaj=2.189 mas, bpa=14.34 degrees
! Estimated noise=5.79704 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00025367 Jy
! Component: 100  -  total flux cleaned = 0.000310138 Jy
! Component: 150  -  total flux cleaned = 0.000347178 Jy
! Component: 200  -  total flux cleaned = 0.000380701 Jy
! Total flux subtracted in 200 components = 0.000380701 Jy
! Clean residual min=-0.000738 max=0.000741 Jy/beam
! Clean residual mean=0.000006 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.0442906 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 48 components and 0.0442906 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028509Jy  sigma=0.020674
! Fit after  self-cal, rms=0.028519Jy  sigma=0.020673
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.95234e-05 Jy
! Component: 100  -  total flux cleaned = 5.42205e-05 Jy
! Component: 150  -  total flux cleaned = 6.76446e-05 Jy
! Component: 200  -  total flux cleaned = 7.6009e-05 Jy
! Total flux subtracted in 200 components = 7.6009e-05 Jy
! Clean residual min=-0.000748 max=0.000738 Jy/beam
! Clean residual mean=0.000005 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.0443666 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 53 components and 0.0443666 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028518Jy  sigma=0.020672
! Fit after  self-cal, rms=0.028518Jy  sigma=0.020672
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028518Jy  sigma=0.020672
! Fit after  self-cal, rms=0.028614Jy  sigma=0.020664
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=2.186 mas, bpa=14.27 degrees
! Estimated noise=5.80691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000179369 Jy
! Component: 100  -  total flux cleaned = 0.000236499 Jy
! Component: 150  -  total flux cleaned = 0.000263763 Jy
! Component: 200  -  total flux cleaned = 0.000280519 Jy
! Total flux subtracted in 200 components = 0.000280519 Jy
! Clean residual min=-0.000751 max=0.000706 Jy/beam
! Clean residual mean=0.000006 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.0446471 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 55 components and 0.0446471 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028612Jy  sigma=0.020662
! Fit after  self-cal, rms=0.028614Jy  sigma=0.020662
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.23699e-05 Jy
! Component: 100  -  total flux cleaned = 2.76417e-05 Jy
! Component: 150  -  total flux cleaned = 3.13097e-05 Jy
! Component: 200  -  total flux cleaned = 3.48772e-05 Jy
! Total flux subtracted in 200 components = 3.48772e-05 Jy
! Clean residual min=-0.000753 max=0.000708 Jy/beam
! Clean residual mean=0.000006 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.044682 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 59 components and 0.044682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028613Jy  sigma=0.020662
! Fit after  self-cal, rms=0.028613Jy  sigma=0.020662
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028613Jy  sigma=0.020662
! Fit after  self-cal, rms=0.028626Jy  sigma=0.020657
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.391 mas, bmaj=2.405 mas, bpa=6.179 degrees
! Estimated noise=6.19768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000114569 Jy
! Component: 100  -  total flux cleaned = 0.000139901 Jy
! Component: 150  -  total flux cleaned = 0.000148034 Jy
! Component: 200  -  total flux cleaned = 0.000151901 Jy
! Total flux subtracted in 200 components = 0.000151901 Jy
! Clean residual min=-0.000885 max=0.000647 Jy/beam
! Clean residual mean=0.000008 rms=0.000217 Jy/beam
! Combined flux in latest and established models = 0.0448339 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 62 components and 0.0448339 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028626Jy  sigma=0.020656
! Fit after  self-cal, rms=0.028626Jy  sigma=0.020656
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.6573e-05 Jy
! Component: 100  -  total flux cleaned = 1.63075e-05 Jy
! Component: 150  -  total flux cleaned = 1.9665e-05 Jy
! Component: 200  -  total flux cleaned = 2.28029e-05 Jy
! Total flux subtracted in 200 components = 2.28029e-05 Jy
! Clean residual min=-0.000886 max=0.000654 Jy/beam
! Clean residual mean=0.000008 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.0448567 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 65 components and 0.0448567 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028626Jy  sigma=0.020656
! Fit after  self-cal, rms=0.028626Jy  sigma=0.020656
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=2.184 mas, bpa=14.27 degrees
! Estimated noise=5.81151 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.059 x 2.184 at 14.27 degrees (North through East)
! Clean map  min=-0.00076914  max=0.042125 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8878 mas, bmaj=2.036 mas, bpa=17.1 degrees
! Estimated noise=12.4916 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0322262 Jy
! Component: 100  -  total flux cleaned = 0.0393158 Jy
! Component: 150  -  total flux cleaned = 0.0416011 Jy
! Component: 200  -  total flux cleaned = 0.0425669 Jy
! Total flux subtracted in 200 components = 0.0425669 Jy
! Clean residual min=-0.001158 max=0.001356 Jy/beam
! Clean residual mean=0.000013 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.0425669 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 22 model components to the UV plane model.
! The established model now contains 22 components and 0.0425669 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=2.184 mas, bpa=14.27 degrees
! Estimated noise=5.81151 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00105151 Jy
! Component: 100  -  total flux cleaned = 0.00158616 Jy
! Component: 150  -  total flux cleaned = 0.00190578 Jy
! Component: 200  -  total flux cleaned = 0.00200688 Jy
! Total flux subtracted in 200 components = 0.00200688 Jy
! Clean residual min=-0.000769 max=0.000728 Jy/beam
! Clean residual mean=0.000007 rms=0.000224 Jy/beam
! Combined flux in latest and established models = 0.0445737 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 54 components and 0.0445737 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.391 mas, bmaj=2.405 mas, bpa=6.179 degrees
! Estimated noise=6.19768 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000115589 Jy
! Component: 100  -  total flux cleaned = 0.000174152 Jy
! Component: 150  -  total flux cleaned = 0.000188348 Jy
! Component: 200  -  total flux cleaned = 0.000201678 Jy
! Total flux subtracted in 200 components = 0.000201678 Jy
! Clean residual min=-0.000890 max=0.000701 Jy/beam
! Clean residual mean=0.000009 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.0447754 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.21044e-05 Jy
! Component: 100  -  total flux cleaned = 2.35403e-05 Jy
! Component: 150  -  total flux cleaned = 2.35206e-05 Jy
! Component: 200  -  total flux cleaned = 2.88011e-05 Jy
! Total flux subtracted in 200 components = 2.88011e-05 Jy
! Clean residual min=-0.000893 max=0.000673 Jy/beam
! Clean residual mean=0.000009 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0448042 Jy
! Adding 14 model components to the UV plane model.
! The established model now contains 62 components and 0.0448042 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.059 mas, bmaj=2.184 mas, bpa=14.27 degrees
! Estimated noise=5.81151 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.99281e-05 Jy
! Component: 100  -  total flux cleaned = -3.7765e-05 Jy
! Component: 150  -  total flux cleaned = -3.1073e-05 Jy
! Component: 200  -  total flux cleaned = -3.67521e-05 Jy
! Total flux subtracted in 200 components = -3.67521e-05 Jy
! Clean residual min=-0.000785 max=0.000702 Jy/beam
! Clean residual mean=0.000006 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.0447674 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 75 components and 0.0447674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028630Jy  sigma=0.020659
! Fit after  self-cal, rms=0.028629Jy  sigma=0.020659
wmodel /scr/pima/s3111c_uvs/J0045+2127_X_map.mod
! Writing 75 model components to file: /scr/pima/s3111c_uvs/J0045+2127_X_map.mod
wobs /scr/pima/s3111c_uvs/J0045+2127_X_uvs.fits
! Writing UV FITS file: /scr/pima/s3111c_uvs/J0045+2127_X_uvs.fits
wwins /scr/pima/s3111c_uvs/J0045+2127_X_map.win
! wwins: Wrote 1 windows to /scr/pima/s3111c_uvs/J0045+2127_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000116188 Jy
! Component: 100  -  total flux cleaned = -6.70461e-05 Jy
! Component: 150  -  total flux cleaned = 2.46748e-05 Jy
! Component: 200  -  total flux cleaned = 0.000101461 Jy
! Component: 250  -  total flux cleaned = 0.000122257 Jy
! Component: 300  -  total flux cleaned = 0.000142589 Jy
! Component: 350  -  total flux cleaned = 0.000142489 Jy
! Component: 400  -  total flux cleaned = 0.000161364 Jy
! Component: 450  -  total flux cleaned = 0.000152142 Jy
! Component: 500  -  total flux cleaned = 0.000143074 Jy
! Component: 550  -  total flux cleaned = 0.000134418 Jy
! Component: 600  -  total flux cleaned = 0.000142884 Jy
! Component: 650  -  total flux cleaned = 0.000134344 Jy
! Component: 700  -  total flux cleaned = 0.000118029 Jy
! Component: 750  -  total flux cleaned = 0.000126296 Jy
! Component: 800  -  total flux cleaned = 0.000126446 Jy
! Component: 850  -  total flux cleaned = 0.000141911 Jy
! Component: 900  -  total flux cleaned = 0.000149464 Jy
! Component: 950  -  total flux cleaned = 0.00014202 Jy
! Component: 1000  -  total flux cleaned = 0.000156775 Jy
! Component: 1050  -  total flux cleaned = 0.000164055 Jy
! Component: 1100  -  total flux cleaned = 0.000192433 Jy
! Component: 1150  -  total flux cleaned = 0.000185373 Jy
! Component: 1200  -  total flux cleaned = 0.000164733 Jy
! Component: 1250  -  total flux cleaned = 0.000151201 Jy
! Component: 1300  -  total flux cleaned = 0.000177878 Jy
! Component: 1350  -  total flux cleaned = 0.000158 Jy
! Component: 1400  -  total flux cleaned = 0.000144946 Jy
! Component: 1450  -  total flux cleaned = 0.000132067 Jy
! Component: 1500  -  total flux cleaned = 0.000119446 Jy
! Component: 1550  -  total flux cleaned = 0.000125767 Jy
! Component: 1600  -  total flux cleaned = 0.000125638 Jy
! Component: 1650  -  total flux cleaned = 0.000113277 Jy
! Component: 1700  -  total flux cleaned = 0.000113321 Jy
! Component: 1750  -  total flux cleaned = 0.00011326 Jy
! Component: 1800  -  total flux cleaned = 0.000107233 Jy
! Component: 1850  -  total flux cleaned = 0.000113079 Jy
! Component: 1900  -  total flux cleaned = 0.000101386 Jy
! Component: 1950  -  total flux cleaned = 0.000107105 Jy
! Component: 2000  -  total flux cleaned = 0.000101397 Jy
! Total flux subtracted in 2048 components = 0.00012402 Jy
! Clean residual min=-0.000295 max=0.000325 Jy/beam
! Clean residual mean=0.000003 rms=0.000132 Jy/beam
! Combined flux in latest and established models = 0.0448915 Jy
keep
! Adding 155 model components to the UV plane model.
! The established model now contains 230 components and 0.0448915 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s3111c_uvs/J0045+2127_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.059 x 2.184 at 14.27 degrees (North through East)
! Clean map  min=-0.00057134  max=0.042012 Jy/beam
! Writing clean map to FITS file: /scr/pima/s3111c_uvs/J0045+2127_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0420122 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000131388 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.938213 0.938213 1.87643 3.75285 7.50571 15.0114 30.0228 60.0457
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.042 
quit
! Quitting program
! Log file /scr/pima/s3111c_uvs/J0045+2127_X_uvs.log closed on Tue Jul 24 09:21:02 2012