! Started logfile: /scr/pima/s3111b_uvs/J1735-1117_X_uvs.log on Mon Jul 23 22:53:23 2012
obs /scr/pima/s3111b_uvs/J1735-1117_X_uva.fits
! Reading UV FITS file: /scr/pima/s3111b_uvs/J1735-1117_X_uva.fits
! AN table 1: 44 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.876446 visibilities/baseline/integration-bin.
! Found source: J1735-1117
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.41193e+09      1.6e+07          1      1.6e+07
!  02        2  8.42793e+09      1.6e+07          1      1.6e+07
!  03        3  8.52393e+09      1.6e+07          1      1.6e+07
!  04        4  8.57193e+09      1.6e+07          1      1.6e+07
!  05        5  8.65193e+09      1.6e+07          1      1.6e+07
!  06        6  8.82793e+09      1.6e+07          1      1.6e+07
!  07        7  8.85993e+09      1.6e+07          1      1.6e+07
!  08        8  8.89193e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 16968 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.1 
print "taper_size =",taper_size
! taper_size = 120 
![@/home/lpetrov/bin/01_muppet /scr/pima/s3111b_uvs/J1735-1117_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.100x0.100 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 122 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 36 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.002466Jy  sigma=0.708728
! Fit after  self-cal, rms=0.970242Jy  sigma=0.685949
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6723 mas, bmaj=1.823 mas, bpa=1.769 degrees
! Estimated noise=15.6228 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.023935 Jy
! Component: 100  -  total flux cleaned = 0.0299663 Jy
! Total flux subtracted in 100 components = 0.0299663 Jy
! Clean residual min=-0.002701 max=0.005901 Jy/beam
! Clean residual mean=0.000085 rms=0.001044 Jy/beam
! Combined flux in latest and established models = 0.0299663 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.0299663 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.037210Jy  sigma=0.026309
! Fit after  self-cal, rms=0.034680Jy  sigma=0.024520
! Inverting map 
! Added new window around map position (6.9, -10.9).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00631229 Jy
! Component: 100  -  total flux cleaned = 0.00983107 Jy
! Total flux subtracted in 100 components = 0.00983107 Jy
! Clean residual min=-0.002230 max=0.004011 Jy/beam
! Clean residual mean=0.000050 rms=0.000809 Jy/beam
! Combined flux in latest and established models = 0.0397974 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 35 components and 0.0397974 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033544Jy  sigma=0.023717
! Fit after  self-cal, rms=0.033381Jy  sigma=0.023602
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7965 mas, bmaj=2.076 mas, bpa=0.7303 degrees
! Estimated noise=7.8598 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00353298 Jy
! Component: 100  -  total flux cleaned = 0.00575409 Jy
! Component: 150  -  total flux cleaned = 0.00727876 Jy
! Component: 200  -  total flux cleaned = 0.00836096 Jy
! Total flux subtracted in 200 components = 0.00836096 Jy
! Clean residual min=-0.002337 max=0.002887 Jy/beam
! Clean residual mean=0.000054 rms=0.000743 Jy/beam
! Combined flux in latest and established models = 0.0481583 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 65 components and 0.0481583 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032956Jy  sigma=0.023302
! Fit after  self-cal, rms=0.032907Jy  sigma=0.023267
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        1.08     GB        0.95     HN        0.97     
!   KP        0.93     LA        0.95     MK        1.11     NL        1.57     
!   OV        1.08     PT        0.98     SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.21     FD        1.09     GB        0.96     HN        0.96     
!   KP        0.98     LA        0.98     MK        1.12     NL        1.78     
!   OV        1.12     PT        1.00     SC        0.98     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        1.06     GB        0.97     HN        0.96     
!   KP        1.02     LA        0.94     MK        1.13     NL        1.58     
!   OV        1.02     PT        0.92     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     FD        1.03     GB        1.01     HN        0.96     
!   KP        0.91     LA        0.96     MK        1.09     NL        1.72     
!   OV        1.12     PT        0.97     SC        1.12     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.22     FD        0.89     GB        0.95     HN        0.93     
!   KP        0.99     LA        0.94     MK        1.11     NL        1.46     
!   OV        1.05     PT        0.99     SC        0.94     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.86     GB        1.03     HN        1.01     
!   KP        0.91     LA        0.97     MK        1.02     NL        1.56     
!   OV        0.97     PT        0.91     SC        0.93     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.90     GB        1.04     HN        1.00*    
!   KP        0.84     LA        0.98     MK        1.00*    NL        1.43     
!   OV        0.99     PT        0.95     SC        0.94     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.85     FD        0.75     GB        0.89     HN        0.92     
!   KP        0.90     LA        0.85     MK        0.84     NL        1.46     
!   OV        0.98     PT        0.90     SC        0.85     
! 
! 
! Fit before self-cal, rms=0.032907Jy  sigma=0.023267
! Fit after  self-cal, rms=0.034704Jy  sigma=0.022746
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7927 mas, bmaj=2.086 mas, bpa=1.541 degrees
! Estimated noise=8.16478 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000592332 Jy
! Component: 100  -  total flux cleaned = -0.000566438 Jy
! Component: 150  -  total flux cleaned = -0.000473782 Jy
! Component: 200  -  total flux cleaned = -0.000458705 Jy
! Total flux subtracted in 200 components = -0.000458705 Jy
! Clean residual min=-0.001158 max=0.002257 Jy/beam
! Clean residual mean=0.000028 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.0476996 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 79 components and 0.0476996 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034665Jy  sigma=0.022723
! Fit after  self-cal, rms=0.034743Jy  sigma=0.022703
! Inverting map 
! Added new window around map position (7.2, -4.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00189718 Jy
! Component: 100  -  total flux cleaned = 0.00266447 Jy
! Component: 150  -  total flux cleaned = 0.00279744 Jy
! Component: 200  -  total flux cleaned = 0.00287019 Jy
! Total flux subtracted in 200 components = 0.00287019 Jy
! Clean residual min=-0.000977 max=0.001174 Jy/beam
! Clean residual mean=0.000013 rms=0.000345 Jy/beam
! Combined flux in latest and established models = 0.0505698 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 112 components and 0.0505698 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034650Jy  sigma=0.022624
! Fit after  self-cal, rms=0.034640Jy  sigma=0.022615
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034640Jy  sigma=0.022615
! Fit after  self-cal, rms=0.035276Jy  sigma=0.022605
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7884 mas, bmaj=2.081 mas, bpa=1.283 degrees
! Estimated noise=8.15874 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000391906 Jy
! Component: 100  -  total flux cleaned = 0.000555042 Jy
! Component: 150  -  total flux cleaned = 0.00072091 Jy
! Component: 200  -  total flux cleaned = 0.000779688 Jy
! Total flux subtracted in 200 components = 0.000779688 Jy
! Clean residual min=-0.000892 max=0.001188 Jy/beam
! Clean residual mean=0.000005 rms=0.000312 Jy/beam
! Combined flux in latest and established models = 0.0513495 Jy
selfcal
! Performing phase self-cal
! Adding 50 model components to the UV plane model.
! The established model now contains 154 components and 0.0513495 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035254Jy  sigma=0.022587
! Fit after  self-cal, rms=0.035262Jy  sigma=0.022585
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000170775 Jy
! Component: 100  -  total flux cleaned = 0.000253397 Jy
! Component: 150  -  total flux cleaned = 0.000265781 Jy
! Component: 200  -  total flux cleaned = 0.000265831 Jy
! Total flux subtracted in 200 components = 0.000265831 Jy
! Clean residual min=-0.000874 max=0.001166 Jy/beam
! Clean residual mean=0.000003 rms=0.000306 Jy/beam
! Combined flux in latest and established models = 0.0516153 Jy
! Performing phase self-cal
! Adding 44 model components to the UV plane model.
! The established model now contains 182 components and 0.0516153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035253Jy  sigma=0.022578
! Fit after  self-cal, rms=0.035252Jy  sigma=0.022578
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035252Jy  sigma=0.022578
! Fit after  self-cal, rms=0.035716Jy  sigma=0.022574
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7859 mas, bmaj=2.078 mas, bpa=1.208 degrees
! Estimated noise=8.17002 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000109203 Jy
! Component: 100  -  total flux cleaned = 0.000234703 Jy
! Component: 150  -  total flux cleaned = 0.000305297 Jy
! Component: 200  -  total flux cleaned = 0.000347618 Jy
! Total flux subtracted in 200 components = 0.000347618 Jy
! Clean residual min=-0.000855 max=0.001163 Jy/beam
! Clean residual mean=0.000003 rms=0.000293 Jy/beam
! Combined flux in latest and established models = 0.051963 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 191 components and 0.0519629 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035707Jy  sigma=0.022567
! Fit after  self-cal, rms=0.035711Jy  sigma=0.022566
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.51954e-05 Jy
! Component: 100  -  total flux cleaned = 6.52456e-05 Jy
! Component: 150  -  total flux cleaned = 5.60442e-05 Jy
! Component: 200  -  total flux cleaned = 3.93873e-05 Jy
! Total flux subtracted in 200 components = 3.93873e-05 Jy
! Clean residual min=-0.000850 max=0.001143 Jy/beam
! Clean residual mean=0.000002 rms=0.000290 Jy/beam
! Combined flux in latest and established models = 0.0520023 Jy
! Performing phase self-cal
! Adding 42 model components to the UV plane model.
! The established model now contains 205 components and 0.0520023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035707Jy  sigma=0.022563
! Fit after  self-cal, rms=0.035706Jy  sigma=0.022562
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035706Jy  sigma=0.022562
! Fit after  self-cal, rms=0.036090Jy  sigma=0.022560
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.271 mas, bmaj=2.891 mas, bpa=5.038 degrees
! Estimated noise=9.35766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000111828 Jy
! Component: 100  -  total flux cleaned = 0.000166036 Jy
! Component: 150  -  total flux cleaned = 0.000225019 Jy
! Component: 200  -  total flux cleaned = 0.000235229 Jy
! Total flux subtracted in 200 components = 0.000235229 Jy
! Clean residual min=-0.001089 max=0.001479 Jy/beam
! Clean residual mean=0.000002 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.0522376 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 214 components and 0.0522376 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036084Jy  sigma=0.022557
! Fit after  self-cal, rms=0.036086Jy  sigma=0.022556
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.92546e-05 Jy
! Component: 100  -  total flux cleaned = 2.93778e-05 Jy
! Component: 150  -  total flux cleaned = 4.6599e-05 Jy
! Component: 200  -  total flux cleaned = 4.67474e-05 Jy
! Total flux subtracted in 200 components = 4.67474e-05 Jy
! Clean residual min=-0.001086 max=0.001463 Jy/beam
! Clean residual mean=0.000001 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.0522843 Jy
! Performing phase self-cal
! Adding 30 model components to the UV plane model.
! The established model now contains 228 components and 0.0522843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036084Jy  sigma=0.022554
! Fit after  self-cal, rms=0.036083Jy  sigma=0.022554
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.7841 mas, bmaj=2.075 mas, bpa=1.187 degrees
! Estimated noise=8.17913 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7841 x 2.075 at 1.187 degrees (North through East)
! Clean map  min=-0.00081201  max=0.030577 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6584 mas, bmaj=1.824 mas, bpa=1.875 degrees
! Estimated noise=15.6818 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0256856 Jy
! Component: 100  -  total flux cleaned = 0.0334757 Jy
! Component: 150  -  total flux cleaned = 0.0378725 Jy
! Component: 200  -  total flux cleaned = 0.0407444 Jy
! Total flux subtracted in 200 components = 0.0407444 Jy
! Clean residual min=-0.001461 max=0.001851 Jy/beam
! Clean residual mean=0.000052 rms=0.000522 Jy/beam
! Combined flux in latest and established models = 0.0407444 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 25 model components to the UV plane model.
! The established model now contains 25 components and 0.0407444 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.7841 mas, bmaj=2.075 mas, bpa=1.187 degrees
! Estimated noise=8.17913 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 2.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00315714 Jy
! Component: 100  -  total flux cleaned = 0.00522438 Jy
! Component: 150  -  total flux cleaned = 0.00678239 Jy
! Component: 200  -  total flux cleaned = 0.00800283 Jy
! Total flux subtracted in 200 components = 0.00800283 Jy
! Clean residual min=-0.000862 max=0.000962 Jy/beam
! Clean residual mean=0.000036 rms=0.000321 Jy/beam
! Combined flux in latest and established models = 0.0487472 Jy
! Adding 83 model components to the UV plane model.
! The established model now contains 103 components and 0.0487472 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.271 mas, bmaj=2.891 mas, bpa=5.038 degrees
! Estimated noise=9.35766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00137235 Jy
! Component: 100  -  total flux cleaned = 0.00231409 Jy
! Component: 150  -  total flux cleaned = 0.00296344 Jy
! Component: 200  -  total flux cleaned = 0.00325127 Jy
! Total flux subtracted in 200 components = 0.00325127 Jy
! Clean residual min=-0.000967 max=0.000977 Jy/beam
! Clean residual mean=0.000009 rms=0.000315 Jy/beam
! Combined flux in latest and established models = 0.0519985 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000183492 Jy
! Component: 100  -  total flux cleaned = 0.000309365 Jy
! Component: 150  -  total flux cleaned = 0.000427645 Jy
! Component: 200  -  total flux cleaned = 0.000498545 Jy
! Total flux subtracted in 200 components = 0.000498545 Jy
! Clean residual min=-0.000950 max=0.001023 Jy/beam
! Clean residual mean=0.000001 rms=0.000300 Jy/beam
! Combined flux in latest and established models = 0.052497 Jy
! Adding 90 model components to the UV plane model.
! The established model now contains 182 components and 0.052497 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.7841 mas, bmaj=2.075 mas, bpa=1.187 degrees
! Estimated noise=8.17913 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.77451e-05 Jy
! Component: 100  -  total flux cleaned = 5.7563e-05 Jy
! Component: 150  -  total flux cleaned = 5.73185e-05 Jy
! Component: 200  -  total flux cleaned = 4.92738e-05 Jy
! Total flux subtracted in 200 components = 4.92738e-05 Jy
! Clean residual min=-0.000774 max=0.000765 Jy/beam
! Clean residual mean=0.000000 rms=0.000218 Jy/beam
! Combined flux in latest and established models = 0.0525463 Jy
selfcal
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 212 components and 0.0525463 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036044Jy  sigma=0.022531
! Fit after  self-cal, rms=0.036032Jy  sigma=0.022525
wmodel /scr/pima/s3111b_uvs/J1735-1117_X_map.mod
! Writing 212 model components to file: /scr/pima/s3111b_uvs/J1735-1117_X_map.mod
wobs /scr/pima/s3111b_uvs/J1735-1117_X_uvs.fits
! Writing UV FITS file: /scr/pima/s3111b_uvs/J1735-1117_X_uvs.fits
wwins /scr/pima/s3111b_uvs/J1735-1117_X_map.win
! wwins: Wrote 4 windows to /scr/pima/s3111b_uvs/J1735-1117_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.7706e-05 Jy
! Component: 100  -  total flux cleaned = 0.000100887 Jy
! Component: 150  -  total flux cleaned = 7.82717e-05 Jy
! Component: 200  -  total flux cleaned = 5.78226e-05 Jy
! Component: 250  -  total flux cleaned = 6.74189e-05 Jy
! Component: 300  -  total flux cleaned = 6.75484e-05 Jy
! Component: 350  -  total flux cleaned = 5.02775e-05 Jy
! Component: 400  -  total flux cleaned = 2.51656e-05 Jy
! Component: 450  -  total flux cleaned = 9.68417e-07 Jy
! Component: 500  -  total flux cleaned = -3.00064e-05 Jy
! Component: 550  -  total flux cleaned = -5.2294e-05 Jy
! Component: 600  -  total flux cleaned = -6.65453e-05 Jy
! Component: 650  -  total flux cleaned = -7.35324e-05 Jy
! Component: 700  -  total flux cleaned = -7.35917e-05 Jy
! Component: 750  -  total flux cleaned = -8.00873e-05 Jy
! Component: 800  -  total flux cleaned = -9.28878e-05 Jy
! Component: 850  -  total flux cleaned = -0.000111316 Jy
! Component: 900  -  total flux cleaned = -0.000111224 Jy
! Component: 950  -  total flux cleaned = -0.000117168 Jy
! Component: 1000  -  total flux cleaned = -0.000128762 Jy
! Component: 1050  -  total flux cleaned = -0.000145603 Jy
! Component: 1100  -  total flux cleaned = -0.000167528 Jy
! Component: 1150  -  total flux cleaned = -0.000178376 Jy
! Component: 1200  -  total flux cleaned = -0.000189094 Jy
! Component: 1250  -  total flux cleaned = -0.00022531 Jy
! Component: 1300  -  total flux cleaned = -0.000265742 Jy
! Component: 1350  -  total flux cleaned = -0.00028551 Jy
! Component: 1400  -  total flux cleaned = -0.000309824 Jy
! Component: 1450  -  total flux cleaned = -0.000333638 Jy
! Component: 1500  -  total flux cleaned = -0.000338379 Jy
! Component: 1550  -  total flux cleaned = -0.000356894 Jy
! Component: 1600  -  total flux cleaned = -0.000375228 Jy
! Component: 1650  -  total flux cleaned = -0.000397719 Jy
! Component: 1700  -  total flux cleaned = -0.000419852 Jy
! Component: 1750  -  total flux cleaned = -0.000445894 Jy
! Component: 1800  -  total flux cleaned = -0.000467246 Jy
! Component: 1850  -  total flux cleaned = -0.000467228 Jy
! Component: 1900  -  total flux cleaned = -0.000492257 Jy
! Component: 1950  -  total flux cleaned = -0.000500469 Jy
! Component: 2000  -  total flux cleaned = -0.000508571 Jy
! Total flux subtracted in 2048 components = -0.00052865 Jy
! Clean residual min=-0.000228 max=0.000241 Jy/beam
! Clean residual mean=0.000002 rms=0.000089 Jy/beam
! Combined flux in latest and established models = 0.0520177 Jy
keep
! Adding 149 model components to the UV plane model.
! The established model now contains 361 components and 0.0520177 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s3111b_uvs/J1735-1117_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.7841 x 2.075 at 1.187 degrees (North through East)
! Clean map  min=-0.00060481  max=0.03099 Jy/beam
! Writing clean map to FITS file: /scr/pima/s3111b_uvs/J1735-1117_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0309897 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.98212e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.869525 0.869525 1.73905 3.4781 6.9562 13.9124 27.8248 55.6496
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.03 
quit
! Quitting program
! Log file /scr/pima/s3111b_uvs/J1735-1117_X_uvs.log closed on Mon Jul 23 22:53:25 2012