! Started logfile: /scr/pima/s3111b_uvs/J0319+1845_X_uvs.log on Mon Jul 23 22:50:25 2012
obs /scr/pima/s3111b_uvs/J0319+1845_X_uva.fits
! Reading UV FITS file: /scr/pima/s3111b_uvs/J0319+1845_X_uva.fits
! AN table 1: 66 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.917631 visibilities/baseline/integration-bin.
! Found source: J0319+1845
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.41193e+09      1.6e+07          1      1.6e+07
!  02        2  8.42793e+09      1.6e+07          1      1.6e+07
!  03        3  8.52393e+09      1.6e+07          1      1.6e+07
!  04        4  8.57193e+09      1.6e+07          1      1.6e+07
!  05        5  8.65193e+09      1.6e+07          1      1.6e+07
!  06        6  8.82793e+09      1.6e+07          1      1.6e+07
!  07        7  8.85993e+09      1.6e+07          1      1.6e+07
!  08        8  8.89193e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 26648 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.1 
print "taper_size =",taper_size
! taper_size = 120 
![@/home/lpetrov/bin/01_muppet /scr/pima/s3111b_uvs/J0319+1845_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.100x0.100 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 166 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000115Jy  sigma=0.707185
! Fit after  self-cal, rms=0.982511Jy  sigma=0.694736
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6324 mas, bmaj=1.715 mas, bpa=-3.504 degrees
! Estimated noise=15.9791 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.014168 Jy
! Component: 100  -  total flux cleaned = 0.0167597 Jy
! Total flux subtracted in 100 components = 0.0167597 Jy
! Clean residual min=-0.002321 max=0.002438 Jy/beam
! Clean residual mean=0.000039 rms=0.000724 Jy/beam
! Combined flux in latest and established models = 0.0167597 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.0167597 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033954Jy  sigma=0.024009
! Fit after  self-cal, rms=0.032401Jy  sigma=0.022911
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00293997 Jy
! Component: 100  -  total flux cleaned = 0.00286836 Jy
! Total flux subtracted in 100 components = 0.00286836 Jy
! Clean residual min=-0.002158 max=0.002339 Jy/beam
! Clean residual mean=0.000048 rms=0.000663 Jy/beam
! Combined flux in latest and established models = 0.019628 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 14 components and 0.019628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032130Jy  sigma=0.022719
! Fit after  self-cal, rms=0.032120Jy  sigma=0.022712
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8152 mas, bmaj=2.048 mas, bpa=-2.171 degrees
! Estimated noise=6.26719 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000878823 Jy
! Component: 100  -  total flux cleaned = 0.00135077 Jy
! Component: 150  -  total flux cleaned = 0.0016212 Jy
! Component: 200  -  total flux cleaned = 0.00166234 Jy
! Total flux subtracted in 200 components = 0.00166234 Jy
! Clean residual min=-0.001064 max=0.001790 Jy/beam
! Clean residual mean=0.000045 rms=0.000395 Jy/beam
! Combined flux in latest and established models = 0.0212904 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 21 components and 0.0212904 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032096Jy  sigma=0.022695
! Fit after  self-cal, rms=0.032092Jy  sigma=0.022692
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        1.06     GB        1.03     HN        1.03     
!   KP        0.88     LA        0.99     MK        1.16     NL        1.70     
!   OV        1.22     PT        0.92     SC        1.12     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        1.00     GB        1.03     HN        1.06     
!   KP        0.86     LA        1.06     MK        1.05     NL        1.82     
!   OV        1.08     PT        1.01     SC        1.04     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.19     FD        1.01     GB        1.09     HN        0.96     
!   KP        0.89     LA        0.98     MK        0.96     NL        1.74     
!   OV        1.00     PT        0.92     SC        1.09     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        0.95     GB        1.09     HN        1.05     
!   KP        0.84     LA        0.98     MK        1.03     NL        1.78     
!   OV        1.09     PT        0.99     SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.81     GB        1.14     HN        0.97     
!   KP        0.91     LA        0.91     MK        0.96     NL        1.73     
!   OV        0.96     PT        0.90     SC        1.07     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.76     GB        1.26     HN        0.79     
!   KP        0.86     LA        0.91     MK        1.01     NL        1.50     
!   OV        0.96     PT        0.99     SC        0.99     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.93     FD        0.73     GB        1.27     HN        1.00*    
!   KP        0.80     LA        0.95     MK        1.00*    NL        1.44     
!   OV        0.91     PT        0.91     SC        0.96     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.80     FD        0.65     GB        1.22     HN        0.78     
!   KP        0.98     LA        0.97     MK        0.75     NL        1.21     
!   OV        0.93     PT        0.88     SC        0.80     
! 
! 
! Fit before self-cal, rms=0.032092Jy  sigma=0.022692
! Fit after  self-cal, rms=0.031713Jy  sigma=0.022255
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8108 mas, bmaj=2.052 mas, bpa=-2.17 degrees
! Estimated noise=6.24389 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-0.3, 3).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000988681 Jy
! Component: 100  -  total flux cleaned = 0.00127821 Jy
! Component: 150  -  total flux cleaned = 0.00150539 Jy
! Component: 200  -  total flux cleaned = 0.00163661 Jy
! Total flux subtracted in 200 components = 0.00163661 Jy
! Clean residual min=-0.000620 max=0.000729 Jy/beam
! Clean residual mean=0.000003 rms=0.000189 Jy/beam
! Combined flux in latest and established models = 0.022927 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 45 components and 0.022927 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031670Jy  sigma=0.022225
! Fit after  self-cal, rms=0.031816Jy  sigma=0.022165
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.031816Jy  sigma=0.022165
! Fit after  self-cal, rms=0.032483Jy  sigma=0.022119
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8122 mas, bmaj=2.044 mas, bpa=-2.216 degrees
! Estimated noise=6.26474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00061374 Jy
! Component: 100  -  total flux cleaned = 0.000819621 Jy
! Component: 150  -  total flux cleaned = 0.000902899 Jy
! Component: 200  -  total flux cleaned = 0.00096509 Jy
! Total flux subtracted in 200 components = 0.00096509 Jy
! Clean residual min=-0.000573 max=0.000632 Jy/beam
! Clean residual mean=0.000003 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0238921 Jy
selfcal
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 70 components and 0.0238921 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032468Jy  sigma=0.022109
! Fit after  self-cal, rms=0.032501Jy  sigma=0.022090
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000309278 Jy
! Component: 100  -  total flux cleaned = 0.000338244 Jy
! Component: 150  -  total flux cleaned = 0.000362241 Jy
! Component: 200  -  total flux cleaned = 0.000376326 Jy
! Total flux subtracted in 200 components = 0.000376326 Jy
! Clean residual min=-0.000650 max=0.000603 Jy/beam
! Clean residual mean=0.000001 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.0242684 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 83 components and 0.0242684 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032495Jy  sigma=0.022086
! Fit after  self-cal, rms=0.032493Jy  sigma=0.022085
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032493Jy  sigma=0.022085
! Fit after  self-cal, rms=0.032883Jy  sigma=0.022076
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8144 mas, bmaj=2.031 mas, bpa=-2.178 degrees
! Estimated noise=6.32231 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000441914 Jy
! Component: 100  -  total flux cleaned = 0.000655659 Jy
! Component: 150  -  total flux cleaned = 0.000702116 Jy
! Component: 200  -  total flux cleaned = 0.000749735 Jy
! Total flux subtracted in 200 components = 0.000749735 Jy
! Clean residual min=-0.000605 max=0.000626 Jy/beam
! Clean residual mean=0.000003 rms=0.000165 Jy/beam
! Combined flux in latest and established models = 0.0250181 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 94 components and 0.0250181 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032874Jy  sigma=0.022071
! Fit after  self-cal, rms=0.032891Jy  sigma=0.022068
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000122846 Jy
! Component: 100  -  total flux cleaned = 0.000157277 Jy
! Component: 150  -  total flux cleaned = 0.000181065 Jy
! Component: 200  -  total flux cleaned = 0.000191594 Jy
! Total flux subtracted in 200 components = 0.000191594 Jy
! Clean residual min=-0.000656 max=0.000595 Jy/beam
! Clean residual mean=0.000001 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.0252097 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 101 components and 0.0252097 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032888Jy  sigma=0.022066
! Fit after  self-cal, rms=0.032885Jy  sigma=0.022064
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032885Jy  sigma=0.022064
! Fit after  self-cal, rms=0.033040Jy  sigma=0.022060
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.265 mas, bmaj=2.375 mas, bpa=-1.21 degrees
! Estimated noise=7.12591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000434996 Jy
! Component: 100  -  total flux cleaned = 0.000636126 Jy
! Component: 150  -  total flux cleaned = 0.000657064 Jy
! Component: 200  -  total flux cleaned = 0.00066915 Jy
! Total flux subtracted in 200 components = 0.00066915 Jy
! Clean residual min=-0.000648 max=0.000765 Jy/beam
! Clean residual mean=0.000004 rms=0.000206 Jy/beam
! Combined flux in latest and established models = 0.0258789 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 116 components and 0.0258789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033034Jy  sigma=0.022058
! Fit after  self-cal, rms=0.033046Jy  sigma=0.022056
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.73726e-05 Jy
! Component: 100  -  total flux cleaned = 8.99461e-05 Jy
! Component: 150  -  total flux cleaned = 8.98112e-05 Jy
! Component: 200  -  total flux cleaned = 8.97956e-05 Jy
! Total flux subtracted in 200 components = 8.97956e-05 Jy
! Clean residual min=-0.000663 max=0.000726 Jy/beam
! Clean residual mean=0.000003 rms=0.000210 Jy/beam
! Combined flux in latest and established models = 0.0259687 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 136 components and 0.0259687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033044Jy  sigma=0.022056
! Fit after  self-cal, rms=0.033043Jy  sigma=0.022056
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8148 mas, bmaj=2.018 mas, bpa=-2.095 degrees
! Estimated noise=6.35945 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8148 x 2.018 at -2.095 degrees (North through East)
! Clean map  min=-0.00075809  max=0.021115 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6326 mas, bmaj=1.657 mas, bpa=-2.993 degrees
! Estimated noise=15.859 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0161895 Jy
! Component: 100  -  total flux cleaned = 0.0202586 Jy
! Component: 150  -  total flux cleaned = 0.0218502 Jy
! Component: 200  -  total flux cleaned = 0.022978 Jy
! Total flux subtracted in 200 components = 0.022978 Jy
! Clean residual min=-0.001875 max=0.001814 Jy/beam
! Clean residual mean=0.000022 rms=0.000449 Jy/beam
! Combined flux in latest and established models = 0.022978 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.022978 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8148 mas, bmaj=2.018 mas, bpa=-2.095 degrees
! Estimated noise=6.35945 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00130904 Jy
! Component: 100  -  total flux cleaned = 0.0018642 Jy
! Component: 150  -  total flux cleaned = 0.00211594 Jy
! Component: 200  -  total flux cleaned = 0.00230013 Jy
! Total flux subtracted in 200 components = 0.00230013 Jy
! Clean residual min=-0.000673 max=0.000725 Jy/beam
! Clean residual mean=0.000006 rms=0.000193 Jy/beam
! Combined flux in latest and established models = 0.0252782 Jy
! Adding 36 model components to the UV plane model.
! The established model now contains 52 components and 0.0252782 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.265 mas, bmaj=2.375 mas, bpa=-1.21 degrees
! Estimated noise=7.12591 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000294603 Jy
! Component: 100  -  total flux cleaned = 0.000365204 Jy
! Component: 150  -  total flux cleaned = 0.000438487 Jy
! Component: 200  -  total flux cleaned = 0.000498998 Jy
! Total flux subtracted in 200 components = 0.000498998 Jy
! Clean residual min=-0.000654 max=0.000738 Jy/beam
! Clean residual mean=0.000004 rms=0.000216 Jy/beam
! Combined flux in latest and established models = 0.0257772 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.10703e-05 Jy
! Component: 100  -  total flux cleaned = 5.84454e-05 Jy
! Component: 150  -  total flux cleaned = 8.29578e-05 Jy
! Component: 200  -  total flux cleaned = 0.000104563 Jy
! Total flux subtracted in 200 components = 0.000104563 Jy
! Clean residual min=-0.000650 max=0.000728 Jy/beam
! Clean residual mean=0.000003 rms=0.000213 Jy/beam
! Combined flux in latest and established models = 0.0258817 Jy
! Adding 54 model components to the UV plane model.
! The established model now contains 98 components and 0.0258817 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8148 mas, bmaj=2.018 mas, bpa=-2.095 degrees
! Estimated noise=6.35945 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.63114e-05 Jy
! Component: 100  -  total flux cleaned = 1.95252e-05 Jy
! Component: 150  -  total flux cleaned = 2.77599e-05 Jy
! Component: 200  -  total flux cleaned = 5.00509e-05 Jy
! Total flux subtracted in 200 components = 5.00509e-05 Jy
! Clean residual min=-0.000653 max=0.000639 Jy/beam
! Clean residual mean=0.000002 rms=0.000177 Jy/beam
! Combined flux in latest and established models = 0.0259318 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 118 components and 0.0259318 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.033048Jy  sigma=0.022063
! Fit after  self-cal, rms=0.033045Jy  sigma=0.022060
wmodel /scr/pima/s3111b_uvs/J0319+1845_X_map.mod
! Writing 118 model components to file: /scr/pima/s3111b_uvs/J0319+1845_X_map.mod
wobs /scr/pima/s3111b_uvs/J0319+1845_X_uvs.fits
! Writing UV FITS file: /scr/pima/s3111b_uvs/J0319+1845_X_uvs.fits
wwins /scr/pima/s3111b_uvs/J0319+1845_X_map.win
! wwins: Wrote 2 windows to /scr/pima/s3111b_uvs/J0319+1845_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.73773e-06 Jy
! Component: 100  -  total flux cleaned = 4.0997e-05 Jy
! Component: 150  -  total flux cleaned = 7.07043e-05 Jy
! Component: 200  -  total flux cleaned = 7.09094e-05 Jy
! Component: 250  -  total flux cleaned = 2.67149e-05 Jy
! Component: 300  -  total flux cleaned = 9.45305e-06 Jy
! Component: 350  -  total flux cleaned = -6.92882e-06 Jy
! Component: 400  -  total flux cleaned = -6.81176e-06 Jy
! Component: 450  -  total flux cleaned = -1.4756e-05 Jy
! Component: 500  -  total flux cleaned = -2.99969e-05 Jy
! Component: 550  -  total flux cleaned = -2.26054e-05 Jy
! Component: 600  -  total flux cleaned = -3.71962e-05 Jy
! Component: 650  -  total flux cleaned = -3.71514e-05 Jy
! Component: 700  -  total flux cleaned = -4.41147e-05 Jy
! Component: 750  -  total flux cleaned = -5.09248e-05 Jy
! Component: 800  -  total flux cleaned = -5.08989e-05 Jy
! Component: 850  -  total flux cleaned = -6.42781e-05 Jy
! Component: 900  -  total flux cleaned = -7.74205e-05 Jy
! Component: 950  -  total flux cleaned = -8.38642e-05 Jy
! Component: 1000  -  total flux cleaned = -0.000102688 Jy
! Component: 1050  -  total flux cleaned = -0.000102607 Jy
! Component: 1100  -  total flux cleaned = -0.000108743 Jy
! Component: 1150  -  total flux cleaned = -0.000114659 Jy
! Component: 1200  -  total flux cleaned = -0.000114587 Jy
! Component: 1250  -  total flux cleaned = -0.000120426 Jy
! Component: 1300  -  total flux cleaned = -0.000126237 Jy
! Component: 1350  -  total flux cleaned = -0.000120539 Jy
! Component: 1400  -  total flux cleaned = -0.000126158 Jy
! Component: 1450  -  total flux cleaned = -0.000126149 Jy
! Component: 1500  -  total flux cleaned = -0.000137175 Jy
! Component: 1550  -  total flux cleaned = -0.00013714 Jy
! Component: 1600  -  total flux cleaned = -0.000142499 Jy
! Component: 1650  -  total flux cleaned = -0.000163648 Jy
! Component: 1700  -  total flux cleaned = -0.000158444 Jy
! Component: 1750  -  total flux cleaned = -0.00016375 Jy
! Component: 1800  -  total flux cleaned = -0.000194556 Jy
! Component: 1850  -  total flux cleaned = -0.000209756 Jy
! Component: 1900  -  total flux cleaned = -0.000234911 Jy
! Component: 1950  -  total flux cleaned = -0.000249822 Jy
! Component: 2000  -  total flux cleaned = -0.000269564 Jy
! Total flux subtracted in 2048 components = -0.000289078 Jy
! Clean residual min=-0.000281 max=0.000254 Jy/beam
! Clean residual mean=-0.000001 rms=0.000113 Jy/beam
! Combined flux in latest and established models = 0.0256427 Jy
keep
! Adding 159 model components to the UV plane model.
! The established model now contains 277 components and 0.0256427 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s3111b_uvs/J0319+1845_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8148 x 2.018 at -2.095 degrees (North through East)
! Clean map  min=-0.00079766  max=0.020858 Jy/beam
! Writing clean map to FITS file: /scr/pima/s3111b_uvs/J0319+1845_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0208583 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000112631 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.61995 1.61995 3.2399 6.47979 12.9596 25.9192 51.8383
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.02 
quit
! Quitting program
! Log file /scr/pima/s3111b_uvs/J0319+1845_X_uvs.log closed on Mon Jul 23 22:50:27 2012