! Started logfile: /scr/pima/s3111b_uvs/J0154+4433_X_uvs.log on Mon Jul 23 22:50:06 2012
obs /scr/pima/s3111b_uvs/J0154+4433_X_uva.fits
! Reading UV FITS file: /scr/pima/s3111b_uvs/J0154+4433_X_uva.fits
! AN table 1: 64 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.927557 visibilities/baseline/integration-bin.
! Found source: J0154+4433
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.41193e+09      1.6e+07          1      1.6e+07
!  02        2  8.42793e+09      1.6e+07          1      1.6e+07
!  03        3  8.52393e+09      1.6e+07          1      1.6e+07
!  04        4  8.57193e+09      1.6e+07          1      1.6e+07
!  05        5  8.65193e+09      1.6e+07          1      1.6e+07
!  06        6  8.82793e+09      1.6e+07          1      1.6e+07
!  07        7  8.85993e+09      1.6e+07          1      1.6e+07
!  08        8  8.89193e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 26120 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.1 
print "taper_size =",taper_size
! taper_size = 120 
![@/home/lpetrov/bin/01_muppet /scr/pima/s3111b_uvs/J0154+4433_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.100x0.100 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 155 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 29 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001808Jy  sigma=0.708285
! Fit after  self-cal, rms=0.975412Jy  sigma=0.689623
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6688 mas, bmaj=1.399 mas, bpa=1.289 degrees
! Estimated noise=14.1296 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0182577 Jy
! Component: 100  -  total flux cleaned = 0.024673 Jy
! Total flux subtracted in 100 components = 0.024673 Jy
! Clean residual min=-0.002311 max=0.002952 Jy/beam
! Clean residual mean=0.000058 rms=0.000708 Jy/beam
! Combined flux in latest and established models = 0.024673 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.024673 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.036236Jy  sigma=0.025620
! Fit after  self-cal, rms=0.033648Jy  sigma=0.023790
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00624151 Jy
! Component: 100  -  total flux cleaned = 0.0092792 Jy
! Total flux subtracted in 100 components = 0.0092792 Jy
! Clean residual min=-0.001939 max=0.002605 Jy/beam
! Clean residual mean=0.000041 rms=0.000627 Jy/beam
! Combined flux in latest and established models = 0.0339522 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 10 components and 0.0339522 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032471Jy  sigma=0.022958
! Fit after  self-cal, rms=0.032449Jy  sigma=0.022943
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8842 mas, bmaj=1.748 mas, bpa=3.525 degrees
! Estimated noise=6.32787 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0018635 Jy
! Component: 100  -  total flux cleaned = 0.00269458 Jy
! Component: 150  -  total flux cleaned = 0.00315018 Jy
! Component: 200  -  total flux cleaned = 0.00344715 Jy
! Total flux subtracted in 200 components = 0.00344715 Jy
! Clean residual min=-0.001546 max=0.003091 Jy/beam
! Clean residual mean=0.000063 rms=0.000608 Jy/beam
! Combined flux in latest and established models = 0.0373993 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 28 components and 0.0373993 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.032352Jy  sigma=0.022874
! Fit after  self-cal, rms=0.032346Jy  sigma=0.022870
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.97     GB        0.90     HN        1.08     
!   KP        0.91     LA        0.95     MK        1.06     NL        2.03     
!   OV        1.07     PT        0.92     SC        1.10     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        1.02     GB        0.89     HN        1.13     
!   KP        0.89     LA        0.94     MK        1.09     NL        2.09     
!   OV        1.12     PT        0.93     SC        1.12     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.97     GB        0.93     HN        1.03     
!   KP        0.86     LA        0.92     MK        1.02     NL        2.00     
!   OV        1.04     PT        0.93     SC        1.12     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.97     GB        0.95     HN        1.08     
!   KP        0.86     LA        0.94     MK        1.08     NL        2.06     
!   OV        1.09     PT        0.96     SC        1.11     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.99     FD        0.91     GB        0.89     HN        1.03     
!   KP        0.88     LA        0.89     MK        1.02     NL        2.16     
!   OV        1.02     PT        0.91     SC        1.05     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     FD        0.82     GB        0.98     HN        1.14     
!   KP        0.80     LA        0.91     MK        0.99     NL        1.91     
!   OV        0.95     PT        0.91     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.96     FD        0.84     GB        1.00     HN        1.00*    
!   KP        0.76     LA        0.89     MK        1.00*    NL        1.76     
!   OV        0.98     PT        0.92     SC        0.93     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        0.69     GB        0.90     HN        1.01     
!   KP        0.77     LA        0.87     MK        0.82     NL        1.88     
!   OV        0.98     PT        0.84     SC        0.80     
! 
! 
! Fit before self-cal, rms=0.032346Jy  sigma=0.022870
! Fit after  self-cal, rms=0.034781Jy  sigma=0.021982
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8863 mas, bmaj=1.755 mas, bpa=4.051 degrees
! Estimated noise=6.34068 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.60578e-05 Jy
! Component: 100  -  total flux cleaned = -1.08657e-05 Jy
! Component: 150  -  total flux cleaned = -5.14219e-07 Jy
! Component: 200  -  total flux cleaned = -6.05942e-07 Jy
! Total flux subtracted in 200 components = -6.05942e-07 Jy
! Clean residual min=-0.000679 max=0.000841 Jy/beam
! Clean residual mean=0.000010 rms=0.000195 Jy/beam
! Combined flux in latest and established models = 0.0373987 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 35 components and 0.0373987 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034774Jy  sigma=0.021975
! Fit after  self-cal, rms=0.034982Jy  sigma=0.021930
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.034982Jy  sigma=0.021930
! Fit after  self-cal, rms=0.035650Jy  sigma=0.021883
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8807 mas, bmaj=1.759 mas, bpa=3.907 degrees
! Estimated noise=6.32219 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.69754e-05 Jy
! Component: 100  -  total flux cleaned = 3.12994e-05 Jy
! Component: 150  -  total flux cleaned = 1.5976e-05 Jy
! Component: 200  -  total flux cleaned = 1.64464e-05 Jy
! Total flux subtracted in 200 components = 1.64464e-05 Jy
! Clean residual min=-0.000500 max=0.000774 Jy/beam
! Clean residual mean=0.000010 rms=0.000164 Jy/beam
! Combined flux in latest and established models = 0.0374152 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 40 components and 0.0374152 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035645Jy  sigma=0.021880
! Fit after  self-cal, rms=0.035668Jy  sigma=0.021876
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-3.9, 5.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000586767 Jy
! Component: 100  -  total flux cleaned = 0.000789701 Jy
! Component: 150  -  total flux cleaned = 0.000900119 Jy
! Component: 200  -  total flux cleaned = 0.000969703 Jy
! Total flux subtracted in 200 components = 0.000969703 Jy
! Clean residual min=-0.000484 max=0.000568 Jy/beam
! Clean residual mean=0.000006 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.0383849 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 62 components and 0.0383848 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035648Jy  sigma=0.021862
! Fit after  self-cal, rms=0.035644Jy  sigma=0.021860
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035644Jy  sigma=0.021860
! Fit after  self-cal, rms=0.035612Jy  sigma=0.021859
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8774 mas, bmaj=1.758 mas, bpa=3.956 degrees
! Estimated noise=6.29905 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000173448 Jy
! Component: 100  -  total flux cleaned = 0.000295212 Jy
! Component: 150  -  total flux cleaned = 0.000351171 Jy
! Component: 200  -  total flux cleaned = 0.000392511 Jy
! Total flux subtracted in 200 components = 0.000392511 Jy
! Clean residual min=-0.000485 max=0.000573 Jy/beam
! Clean residual mean=0.000006 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.0387774 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 68 components and 0.0387774 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035605Jy  sigma=0.021855
! Fit after  self-cal, rms=0.035606Jy  sigma=0.021854
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.58098e-05 Jy
! Component: 100  -  total flux cleaned = 7.09171e-05 Jy
! Component: 150  -  total flux cleaned = 9.16348e-05 Jy
! Component: 200  -  total flux cleaned = 9.79549e-05 Jy
! Total flux subtracted in 200 components = 9.79549e-05 Jy
! Clean residual min=-0.000491 max=0.000569 Jy/beam
! Clean residual mean=0.000006 rms=0.000141 Jy/beam
! Combined flux in latest and established models = 0.0388753 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 72 components and 0.0388753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035603Jy  sigma=0.021852
! Fit after  self-cal, rms=0.035603Jy  sigma=0.021852
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035603Jy  sigma=0.021852
! Fit after  self-cal, rms=0.035541Jy  sigma=0.021851
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.31 mas, bmaj=2.195 mas, bpa=4.333 degrees
! Estimated noise=6.9678 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.27093e-05 Jy
! Component: 100  -  total flux cleaned = 3.96105e-05 Jy
! Component: 150  -  total flux cleaned = 5.053e-05 Jy
! Component: 200  -  total flux cleaned = 6.38527e-05 Jy
! Total flux subtracted in 200 components = 6.38527e-05 Jy
! Clean residual min=-0.000447 max=0.000628 Jy/beam
! Clean residual mean=0.000013 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.0389392 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 80 components and 0.0389392 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035539Jy  sigma=0.021850
! Fit after  self-cal, rms=0.035538Jy  sigma=0.021850
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.08837e-05 Jy
! Component: 100  -  total flux cleaned = 3.42943e-06 Jy
! Component: 150  -  total flux cleaned = 7.26739e-06 Jy
! Component: 200  -  total flux cleaned = 1.76725e-05 Jy
! Total flux subtracted in 200 components = 1.76725e-05 Jy
! Clean residual min=-0.000446 max=0.000632 Jy/beam
! Clean residual mean=0.000013 rms=0.000152 Jy/beam
! Combined flux in latest and established models = 0.0389568 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 87 components and 0.0389568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035537Jy  sigma=0.021850
! Fit after  self-cal, rms=0.035536Jy  sigma=0.021849
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8757 mas, bmaj=1.756 mas, bpa=3.962 degrees
! Estimated noise=6.29749 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8757 x 1.756 at 3.962 degrees (North through East)
! Clean map  min=-0.0007963  max=0.028202 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6593 mas, bmaj=1.403 mas, bpa=2.209 degrees
! Estimated noise=13.9692 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.020815 Jy
! Component: 100  -  total flux cleaned = 0.0291752 Jy
! Component: 150  -  total flux cleaned = 0.0333533 Jy
! Component: 200  -  total flux cleaned = 0.0349174 Jy
! Total flux subtracted in 200 components = 0.0349174 Jy
! Clean residual min=-0.001470 max=0.001296 Jy/beam
! Clean residual mean=0.000011 rms=0.000371 Jy/beam
! Combined flux in latest and established models = 0.0349175 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 11 model components to the UV plane model.
! The established model now contains 11 components and 0.0349175 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8757 mas, bmaj=1.756 mas, bpa=3.962 degrees
! Estimated noise=6.29749 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00133029 Jy
! Component: 100  -  total flux cleaned = 0.00217154 Jy
! Component: 150  -  total flux cleaned = 0.00279206 Jy
! Component: 200  -  total flux cleaned = 0.00312626 Jy
! Total flux subtracted in 200 components = 0.00312626 Jy
! Clean residual min=-0.000524 max=0.000609 Jy/beam
! Clean residual mean=0.000012 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.0380437 Jy
! Adding 24 model components to the UV plane model.
! The established model now contains 34 components and 0.0380437 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.31 mas, bmaj=2.195 mas, bpa=4.333 degrees
! Estimated noise=6.9678 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000383984 Jy
! Component: 100  -  total flux cleaned = 0.000560793 Jy
! Component: 150  -  total flux cleaned = 0.00069358 Jy
! Component: 200  -  total flux cleaned = 0.000754186 Jy
! Total flux subtracted in 200 components = 0.000754186 Jy
! Clean residual min=-0.000440 max=0.000649 Jy/beam
! Clean residual mean=0.000014 rms=0.000158 Jy/beam
! Combined flux in latest and established models = 0.0387979 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.5068e-05 Jy
! Component: 100  -  total flux cleaned = 3.55076e-05 Jy
! Component: 150  -  total flux cleaned = 3.55784e-05 Jy
! Component: 200  -  total flux cleaned = 4.75601e-05 Jy
! Total flux subtracted in 200 components = 4.75601e-05 Jy
! Clean residual min=-0.000444 max=0.000644 Jy/beam
! Clean residual mean=0.000013 rms=0.000155 Jy/beam
! Combined flux in latest and established models = 0.0388455 Jy
! Adding 44 model components to the UV plane model.
! The established model now contains 71 components and 0.0388455 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8757 mas, bmaj=1.756 mas, bpa=3.962 degrees
! Estimated noise=6.29749 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000117131 Jy
! Component: 100  -  total flux cleaned = -0.000149284 Jy
! Component: 150  -  total flux cleaned = -0.000131432 Jy
! Component: 200  -  total flux cleaned = -9.85116e-05 Jy
! Total flux subtracted in 200 components = -9.85116e-05 Jy
! Clean residual min=-0.000492 max=0.000587 Jy/beam
! Clean residual mean=0.000009 rms=0.000143 Jy/beam
! Combined flux in latest and established models = 0.038747 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 92 components and 0.038747 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.035542Jy  sigma=0.021854
! Fit after  self-cal, rms=0.035541Jy  sigma=0.021853
wmodel /scr/pima/s3111b_uvs/J0154+4433_X_map.mod
! Writing 92 model components to file: /scr/pima/s3111b_uvs/J0154+4433_X_map.mod
wobs /scr/pima/s3111b_uvs/J0154+4433_X_uvs.fits
! Writing UV FITS file: /scr/pima/s3111b_uvs/J0154+4433_X_uvs.fits
wwins /scr/pima/s3111b_uvs/J0154+4433_X_map.win
! wwins: Wrote 2 windows to /scr/pima/s3111b_uvs/J0154+4433_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000126517 Jy
! Component: 100  -  total flux cleaned = 0.000160364 Jy
! Component: 150  -  total flux cleaned = 0.00016871 Jy
! Component: 200  -  total flux cleaned = 0.000199837 Jy
! Component: 250  -  total flux cleaned = 0.000237021 Jy
! Component: 300  -  total flux cleaned = 0.00025838 Jy
! Component: 350  -  total flux cleaned = 0.000279209 Jy
! Component: 400  -  total flux cleaned = 0.000333421 Jy
! Component: 450  -  total flux cleaned = 0.000372805 Jy
! Component: 500  -  total flux cleaned = 0.000392045 Jy
! Component: 550  -  total flux cleaned = 0.00041098 Jy
! Component: 600  -  total flux cleaned = 0.000423475 Jy
! Component: 650  -  total flux cleaned = 0.000447657 Jy
! Component: 700  -  total flux cleaned = 0.000453487 Jy
! Component: 750  -  total flux cleaned = 0.000476815 Jy
! Component: 800  -  total flux cleaned = 0.000499703 Jy
! Component: 850  -  total flux cleaned = 0.000516699 Jy
! Component: 900  -  total flux cleaned = 0.000538944 Jy
! Component: 950  -  total flux cleaned = 0.000555282 Jy
! Component: 1000  -  total flux cleaned = 0.000576795 Jy
! Component: 1050  -  total flux cleaned = 0.000582023 Jy
! Component: 1100  -  total flux cleaned = 0.000592566 Jy
! Component: 1150  -  total flux cleaned = 0.000608087 Jy
! Component: 1200  -  total flux cleaned = 0.000613129 Jy
! Component: 1250  -  total flux cleaned = 0.000623263 Jy
! Component: 1300  -  total flux cleaned = 0.000638141 Jy
! Component: 1350  -  total flux cleaned = 0.000643049 Jy
! Component: 1400  -  total flux cleaned = 0.000643153 Jy
! Component: 1450  -  total flux cleaned = 0.000652751 Jy
! Component: 1500  -  total flux cleaned = 0.000657388 Jy
! Component: 1550  -  total flux cleaned = 0.000652702 Jy
! Component: 1600  -  total flux cleaned = 0.000666591 Jy
! Component: 1650  -  total flux cleaned = 0.000652838 Jy
! Component: 1700  -  total flux cleaned = 0.000666434 Jy
! Component: 1750  -  total flux cleaned = 0.000653002 Jy
! Component: 1800  -  total flux cleaned = 0.000661933 Jy
! Component: 1850  -  total flux cleaned = 0.000653042 Jy
! Component: 1900  -  total flux cleaned = 0.000644317 Jy
! Component: 1950  -  total flux cleaned = 0.000648642 Jy
! Component: 2000  -  total flux cleaned = 0.000661461 Jy
! Total flux subtracted in 2048 components = 0.000657178 Jy
! Clean residual min=-0.000244 max=0.000242 Jy/beam
! Clean residual mean=0.000004 rms=0.000093 Jy/beam
! Combined flux in latest and established models = 0.0394041 Jy
keep
! Adding 142 model components to the UV plane model.
! The established model now contains 234 components and 0.0394041 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s3111b_uvs/J0154+4433_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8757 x 1.756 at 3.962 degrees (North through East)
! Clean map  min=-0.00072292  max=0.028135 Jy/beam
! Writing clean map to FITS file: /scr/pima/s3111b_uvs/J0154+4433_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0281347 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 9.31253e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.992994 0.992994 1.98599 3.97198 7.94396 15.8879 31.7758 63.5516
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.028 
quit
! Quitting program
! Log file /scr/pima/s3111b_uvs/J0154+4433_X_uvs.log closed on Mon Jul 23 22:50:08 2012