! Started logfile: /scr/pima/s3111a_uvs/J1756+5522_X_uvs.log on Mon Jul 23 07:18:24 2012
obs /scr/pima/s3111a_uvs/J1756+5522_X_uva.fits
! Reading UV FITS file: /scr/pima/s3111a_uvs/J1756+5522_X_uva.fits
! AN table 1: 81 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.773288 visibilities/baseline/integration-bin.
! Found source: J1756+5522
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.41193e+09      1.6e+07          1      1.6e+07
!  02        2  8.42793e+09      1.6e+07          1      1.6e+07
!  03        3  8.52393e+09      1.6e+07          1      1.6e+07
!  04        4  8.57193e+09      1.6e+07          1      1.6e+07
!  05        5  8.65193e+09      1.6e+07          1      1.6e+07
!  06        6  8.82793e+09      1.6e+07          1      1.6e+07
!  07        7  8.85993e+09      1.6e+07          1      1.6e+07
!  08        8  8.89193e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 27560 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.1 
print "taper_size =",taper_size
! taper_size = 120 
![@/home/lpetrov/bin/01_muppet /scr/pima/s3111a_uvs/J1756+5522_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.100x0.100 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 194 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 33 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000648Jy  sigma=0.707558
! Fit after  self-cal, rms=0.991546Jy  sigma=0.701121
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7917 mas, bmaj=1.284 mas, bpa=6.928 degrees
! Estimated noise=13.836 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00738299 Jy
! Component: 100  -  total flux cleaned = 0.00879346 Jy
! Total flux subtracted in 100 components = 0.00879346 Jy
! Clean residual min=-0.001777 max=0.001467 Jy/beam
! Clean residual mean=0.000003 rms=0.000404 Jy/beam
! Combined flux in latest and established models = 0.00879346 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 4 components and 0.00879346 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025036Jy  sigma=0.017703
! Fit after  self-cal, rms=0.023552Jy  sigma=0.016653
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00361448 Jy
! Component: 100  -  total flux cleaned = 0.00392672 Jy
! Total flux subtracted in 100 components = 0.00392672 Jy
! Clean residual min=-0.001552 max=0.001796 Jy/beam
! Clean residual mean=0.000003 rms=0.000431 Jy/beam
! Combined flux in latest and established models = 0.0127202 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 9 components and 0.0127202 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023214Jy  sigma=0.016415
! Fit after  self-cal, rms=0.023213Jy  sigma=0.016414
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.997 mas, bmaj=1.631 mas, bpa=12.13 degrees
! Estimated noise=6.12157 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000535835 Jy
! Component: 100  -  total flux cleaned = -0.000640046 Jy
! Component: 150  -  total flux cleaned = -0.000701923 Jy
! Component: 200  -  total flux cleaned = -0.00073852 Jy
! Total flux subtracted in 200 components = -0.00073852 Jy
! Clean residual min=-0.001090 max=0.001051 Jy/beam
! Clean residual mean=-0.000004 rms=0.000297 Jy/beam
! Combined flux in latest and established models = 0.0119817 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 19 components and 0.0119817 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023200Jy  sigma=0.016405
! Fit after  self-cal, rms=0.023196Jy  sigma=0.016402
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.83     FD        0.92     GB        2.71     HN        0.98     
!   KP        1.01     LA        1.18     MK        0.94     NL        0.92     
!   OV        0.89     PT        1.11     SC        1.09     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.80     FD        0.97     GB        3.64     HN        0.91     
!   KP        1.16     LA        1.20     MK        0.89     NL        1.05     
!   OV        0.79     PT        1.15     SC        1.08     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.78     FD        0.92     GB        3.19     HN        0.89     
!   KP        1.08     LA        1.13     MK        0.85     NL        0.91     
!   OV        0.82     PT        1.11     SC        1.09     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.82     FD        0.93     GB        3.47     HN        0.83     
!   KP        1.06     LA        1.17     MK        0.86     NL        1.01     
!   OV        0.78     PT        1.23     SC        1.14     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.81     FD        0.74     GB        3.07     HN        0.83     
!   KP        1.00     LA        1.04     MK        0.89     NL        0.94     
!   OV        0.83     PT        1.19     SC        1.00     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.72     FD        0.73     GB        3.84     HN        0.90     
!   KP        0.94     LA        1.11     MK        0.79     NL        0.91     
!   OV        0.76     PT        1.22     SC        1.03     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.64     GB        2.80     HN        1.01     
!   KP        0.87     LA        1.02     MK        1.00*    NL        0.86     
!   OV        0.80     PT        1.18     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.62     FD        0.71     GB        2.97     HN        0.98     
!   KP        0.90     LA        1.19     MK        0.75     NL        0.84     
!   OV        0.80     PT        1.19     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.023196Jy  sigma=0.016402
! Fit after  self-cal, rms=0.023555Jy  sigma=0.016065
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9914 mas, bmaj=1.605 mas, bpa=13.45 degrees
! Estimated noise=6.14603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000144631 Jy
! Component: 100  -  total flux cleaned = 0.000149252 Jy
! Component: 150  -  total flux cleaned = 0.000156779 Jy
! Component: 200  -  total flux cleaned = 0.000162822 Jy
! Total flux subtracted in 200 components = 0.000162822 Jy
! Clean residual min=-0.000389 max=0.000420 Jy/beam
! Clean residual mean=0.000002 rms=0.000115 Jy/beam
! Combined flux in latest and established models = 0.0121445 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 32 components and 0.0121445 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023550Jy  sigma=0.016065
! Fit after  self-cal, rms=0.023800Jy  sigma=0.016001
! Inverting map 
! Added new window around map position (-1.8, -6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000143585 Jy
! Component: 100  -  total flux cleaned = -1.64691e-05 Jy
! Component: 150  -  total flux cleaned = -0.000174152 Jy
! Component: 200  -  total flux cleaned = -0.000305638 Jy
! Total flux subtracted in 200 components = -0.000305638 Jy
! Clean residual min=-0.000447 max=0.000403 Jy/beam
! Clean residual mean=-0.000004 rms=0.000112 Jy/beam
! Combined flux in latest and established models = 0.0118389 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 50 components and 0.0118389 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023783Jy  sigma=0.015989
! Fit after  self-cal, rms=0.023794Jy  sigma=0.015984
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023794Jy  sigma=0.015984
! Fit after  self-cal, rms=0.025814Jy  sigma=0.015960
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9891 mas, bmaj=1.585 mas, bpa=12.76 degrees
! Estimated noise=6.2026 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000158124 Jy
! Component: 100  -  total flux cleaned = -0.000151331 Jy
! Component: 150  -  total flux cleaned = -0.000144944 Jy
! Component: 200  -  total flux cleaned = -0.000139687 Jy
! Total flux subtracted in 200 components = -0.000139687 Jy
! Clean residual min=-0.000387 max=0.000352 Jy/beam
! Clean residual mean=-0.000000 rms=0.000098 Jy/beam
! Combined flux in latest and established models = 0.0116992 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 64 components and 0.0116992 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025809Jy  sigma=0.015958
! Fit after  self-cal, rms=0.025895Jy  sigma=0.015944
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00012797 Jy
! Component: 100  -  total flux cleaned = -0.000230035 Jy
! Component: 150  -  total flux cleaned = -0.000307451 Jy
! Component: 200  -  total flux cleaned = -0.000340199 Jy
! Total flux subtracted in 200 components = -0.000340199 Jy
! Clean residual min=-0.000409 max=0.000351 Jy/beam
! Clean residual mean=-0.000000 rms=0.000096 Jy/beam
! Combined flux in latest and established models = 0.011359 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 77 components and 0.011359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025892Jy  sigma=0.015942
! Fit after  self-cal, rms=0.025897Jy  sigma=0.015939
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025897Jy  sigma=0.015939
! Fit after  self-cal, rms=0.026932Jy  sigma=0.015938
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9872 mas, bmaj=1.579 mas, bpa=12.32 degrees
! Estimated noise=6.35849 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.1116e-05 Jy
! Component: 100  -  total flux cleaned = -5.21775e-05 Jy
! Component: 150  -  total flux cleaned = -5.86471e-05 Jy
! Component: 200  -  total flux cleaned = -5.91365e-05 Jy
! Total flux subtracted in 200 components = -5.91365e-05 Jy
! Clean residual min=-0.000412 max=0.000349 Jy/beam
! Clean residual mean=0.000003 rms=0.000097 Jy/beam
! Combined flux in latest and established models = 0.0112998 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 91 components and 0.0112998 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026927Jy  sigma=0.015935
! Fit after  self-cal, rms=0.026955Jy  sigma=0.015930
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000130761 Jy
! Component: 100  -  total flux cleaned = -0.000146218 Jy
! Component: 150  -  total flux cleaned = -0.000141964 Jy
! Component: 200  -  total flux cleaned = -0.000141927 Jy
! Total flux subtracted in 200 components = -0.000141927 Jy
! Clean residual min=-0.000412 max=0.000329 Jy/beam
! Clean residual mean=0.000001 rms=0.000095 Jy/beam
! Combined flux in latest and established models = 0.0111579 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 96 components and 0.0111579 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026953Jy  sigma=0.015928
! Fit after  self-cal, rms=0.026951Jy  sigma=0.015925
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026951Jy  sigma=0.015925
! Fit after  self-cal, rms=0.027583Jy  sigma=0.015925
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.393 mas, bmaj=1.981 mas, bpa=15.51 degrees
! Estimated noise=7.13752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.27333e-05 Jy
! Component: 100  -  total flux cleaned = 6.64638e-05 Jy
! Component: 150  -  total flux cleaned = 5.287e-05 Jy
! Component: 200  -  total flux cleaned = 4.8708e-05 Jy
! Total flux subtracted in 200 components = 4.8708e-05 Jy
! Clean residual min=-0.000447 max=0.000322 Jy/beam
! Clean residual mean=0.000002 rms=0.000102 Jy/beam
! Combined flux in latest and established models = 0.0112066 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 115 components and 0.0112066 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027581Jy  sigma=0.015923
! Fit after  self-cal, rms=0.027596Jy  sigma=0.015922
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.53073e-05 Jy
! Component: 100  -  total flux cleaned = -6.83993e-05 Jy
! Component: 150  -  total flux cleaned = -8.59654e-05 Jy
! Component: 200  -  total flux cleaned = -0.000101201 Jy
! Total flux subtracted in 200 components = -0.000101201 Jy
! Clean residual min=-0.000445 max=0.000329 Jy/beam
! Clean residual mean=0.000002 rms=0.000101 Jy/beam
! Combined flux in latest and established models = 0.0111054 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 119 components and 0.0111054 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027595Jy  sigma=0.015921
! Fit after  self-cal, rms=0.027595Jy  sigma=0.015918
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9855 mas, bmaj=1.574 mas, bpa=12.05 degrees
! Estimated noise=6.46738 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9855 x 1.574 at 12.05 degrees (North through East)
! Clean map  min=-0.00096623  max=0.013185 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7921 mas, bmaj=1.238 mas, bpa=7.305 degrees
! Estimated noise=13.8894 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0106764 Jy
! Component: 100  -  total flux cleaned = 0.0126729 Jy
! Component: 150  -  total flux cleaned = 0.0125966 Jy
! Component: 200  -  total flux cleaned = 0.0125309 Jy
! Total flux subtracted in 200 components = 0.0125309 Jy
! Clean residual min=-0.000802 max=0.000724 Jy/beam
! Clean residual mean=-0.000001 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.0125309 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.0125309 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9855 mas, bmaj=1.574 mas, bpa=12.05 degrees
! Estimated noise=6.46738 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000378 Jy
! Component: 100  -  total flux cleaned = -0.000651714 Jy
! Component: 150  -  total flux cleaned = -0.000819284 Jy
! Component: 200  -  total flux cleaned = -0.000936353 Jy
! Total flux subtracted in 200 components = -0.000936353 Jy
! Clean residual min=-0.000423 max=0.000383 Jy/beam
! Clean residual mean=0.000000 rms=0.000110 Jy/beam
! Combined flux in latest and established models = 0.0115945 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 33 components and 0.0115945 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.393 mas, bmaj=1.981 mas, bpa=15.51 degrees
! Estimated noise=7.13752 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000184746 Jy
! Component: 100  -  total flux cleaned = -0.000226449 Jy
! Component: 150  -  total flux cleaned = -0.000269873 Jy
! Component: 200  -  total flux cleaned = -0.000308435 Jy
! Total flux subtracted in 200 components = -0.000308435 Jy
! Clean residual min=-0.000461 max=0.000356 Jy/beam
! Clean residual mean=0.000001 rms=0.000109 Jy/beam
! Combined flux in latest and established models = 0.0112861 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.45594e-05 Jy
! Component: 100  -  total flux cleaned = -7.0731e-05 Jy
! Component: 150  -  total flux cleaned = -9.86421e-05 Jy
! Component: 200  -  total flux cleaned = -0.000119817 Jy
! Total flux subtracted in 200 components = -0.000119817 Jy
! Clean residual min=-0.000459 max=0.000341 Jy/beam
! Clean residual mean=0.000001 rms=0.000105 Jy/beam
! Combined flux in latest and established models = 0.0111663 Jy
! Adding 63 model components to the UV plane model.
! The established model now contains 88 components and 0.0111662 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9855 mas, bmaj=1.574 mas, bpa=12.05 degrees
! Estimated noise=6.46738 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.11673e-05 Jy
! Component: 100  -  total flux cleaned = 4.1121e-05 Jy
! Component: 150  -  total flux cleaned = 3.61204e-05 Jy
! Component: 200  -  total flux cleaned = 3.60995e-05 Jy
! Total flux subtracted in 200 components = 3.60995e-05 Jy
! Clean residual min=-0.000417 max=0.000337 Jy/beam
! Clean residual mean=0.000001 rms=0.000099 Jy/beam
! Combined flux in latest and established models = 0.0112023 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 108 components and 0.0112023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027596Jy  sigma=0.015920
! Fit after  self-cal, rms=0.027590Jy  sigma=0.015919
wmodel /scr/pima/s3111a_uvs/J1756+5522_X_map.mod
! Writing 108 model components to file: /scr/pima/s3111a_uvs/J1756+5522_X_map.mod
wobs /scr/pima/s3111a_uvs/J1756+5522_X_uvs.fits
! Writing UV FITS file: /scr/pima/s3111a_uvs/J1756+5522_X_uvs.fits
wwins /scr/pima/s3111a_uvs/J1756+5522_X_map.win
! wwins: Wrote 2 windows to /scr/pima/s3111a_uvs/J1756+5522_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000140048 Jy
! Component: 100  -  total flux cleaned = -0.00012255 Jy
! Component: 150  -  total flux cleaned = -8.90107e-05 Jy
! Component: 200  -  total flux cleaned = -5.73942e-05 Jy
! Component: 250  -  total flux cleaned = -2.69782e-05 Jy
! Component: 300  -  total flux cleaned = 2.28794e-06 Jy
! Component: 350  -  total flux cleaned = 2.57309e-05 Jy
! Component: 400  -  total flux cleaned = 5.75606e-05 Jy
! Component: 450  -  total flux cleaned = 9.72671e-05 Jy
! Component: 500  -  total flux cleaned = 0.000114447 Jy
! Component: 550  -  total flux cleaned = 0.000139693 Jy
! Component: 600  -  total flux cleaned = 0.000172517 Jy
! Component: 650  -  total flux cleaned = 0.000184682 Jy
! Component: 700  -  total flux cleaned = 0.000212426 Jy
! Component: 750  -  total flux cleaned = 0.000235806 Jy
! Component: 800  -  total flux cleaned = 0.000258772 Jy
! Component: 850  -  total flux cleaned = 0.000285103 Jy
! Component: 900  -  total flux cleaned = 0.000318505 Jy
! Component: 950  -  total flux cleaned = 0.000333127 Jy
! Component: 1000  -  total flux cleaned = 0.00037285 Jy
! Component: 1050  -  total flux cleaned = 0.000408399 Jy
! Component: 1100  -  total flux cleaned = 0.000418858 Jy
! Component: 1150  -  total flux cleaned = 0.000446672 Jy
! Component: 1200  -  total flux cleaned = 0.000463808 Jy
! Component: 1250  -  total flux cleaned = 0.000477352 Jy
! Component: 1300  -  total flux cleaned = 0.000504125 Jy
! Component: 1350  -  total flux cleaned = 0.000523922 Jy
! Component: 1400  -  total flux cleaned = 0.000537028 Jy
! Component: 1450  -  total flux cleaned = 0.00055324 Jy
! Component: 1500  -  total flux cleaned = 0.000575682 Jy
! Component: 1550  -  total flux cleaned = 0.000594662 Jy
! Component: 1600  -  total flux cleaned = 0.00059778 Jy
! Component: 1650  -  total flux cleaned = 0.000616428 Jy
! Component: 1700  -  total flux cleaned = 0.000625588 Jy
! Component: 1750  -  total flux cleaned = 0.000625565 Jy
! Component: 1800  -  total flux cleaned = 0.000637635 Jy
! Component: 1850  -  total flux cleaned = 0.000634642 Jy
! Component: 1900  -  total flux cleaned = 0.000643529 Jy
! Component: 1950  -  total flux cleaned = 0.000655221 Jy
! Component: 2000  -  total flux cleaned = 0.000655215 Jy
! Total flux subtracted in 2048 components = 0.000655206 Jy
! Clean residual min=-0.000151 max=0.000169 Jy/beam
! Clean residual mean=0.000000 rms=0.000061 Jy/beam
! Combined flux in latest and established models = 0.0118576 Jy
keep
! Adding 136 model components to the UV plane model.
! The established model now contains 244 components and 0.0118575 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s3111a_uvs/J1756+5522_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9855 x 1.574 at 12.05 degrees (North through East)
! Clean map  min=-0.00090866  max=0.013086 Jy/beam
! Writing clean map to FITS file: /scr/pima/s3111a_uvs/J1756+5522_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0130864 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 6.06889e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.39127 1.39127 2.78254 5.56508 11.1302 22.2603 44.5207 89.0413
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0001 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.013 
quit
! Quitting program
! Log file /scr/pima/s3111a_uvs/J1756+5522_X_uvs.log closed on Mon Jul 23 07:18:26 2012