! Started logfile: /scr/pima/s3111a_uvs/J1630+5221_X_uvs.log on Mon Jul 23 07:18:14 2012
obs /scr/pima/s3111a_uvs/J1630+5221_X_uva.fits
! Reading UV FITS file: /scr/pima/s3111a_uvs/J1630+5221_X_uva.fits
! AN table 1: 75 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.859879 visibilities/baseline/integration-bin.
! Found source: J1630+5221
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.41193e+09      1.6e+07          1      1.6e+07
!  02        2  8.42793e+09      1.6e+07          1      1.6e+07
!  03        3  8.52393e+09      1.6e+07          1      1.6e+07
!  04        4  8.57193e+09      1.6e+07          1      1.6e+07
!  05        5  8.65193e+09      1.6e+07          1      1.6e+07
!  06        6  8.82793e+09      1.6e+07          1      1.6e+07
!  07        7  8.85993e+09      1.6e+07          1      1.6e+07
!  08        8  8.89193e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 28376 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.1 
print "taper_size =",taper_size
! taper_size = 120 
![@/home/lpetrov/bin/01_muppet /scr/pima/s3111a_uvs/J1630+5221_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.100x0.100 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 214 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 65 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000687Jy  sigma=0.707594
! Fit after  self-cal, rms=0.988571Jy  sigma=0.699024
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6284 mas, bmaj=1.492 mas, bpa=-11.22 degrees
! Estimated noise=14.9985 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00919575 Jy
! Component: 100  -  total flux cleaned = 0.0112525 Jy
! Total flux subtracted in 100 components = 0.0112525 Jy
! Clean residual min=-0.001729 max=0.001935 Jy/beam
! Clean residual mean=0.000001 rms=0.000439 Jy/beam
! Combined flux in latest and established models = 0.0112525 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.0112525 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026556Jy  sigma=0.018778
! Fit after  self-cal, rms=0.024484Jy  sigma=0.017313
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00427963 Jy
! Component: 100  -  total flux cleaned = 0.00562148 Jy
! Total flux subtracted in 100 components = 0.00562148 Jy
! Clean residual min=-0.001311 max=0.002063 Jy/beam
! Clean residual mean=0.000004 rms=0.000374 Jy/beam
! Combined flux in latest and established models = 0.016874 Jy
! Performing phase self-cal
! Adding 4 model components to the UV plane model.
! The established model now contains 9 components and 0.016874 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023844Jy  sigma=0.016860
! Fit after  self-cal, rms=0.023835Jy  sigma=0.016854
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8357 mas, bmaj=1.808 mas, bpa=-10.72 degrees
! Estimated noise=6.07603 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.3, 0.9).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00200864 Jy
! Component: 100  -  total flux cleaned = 0.00297164 Jy
! Component: 150  -  total flux cleaned = 0.00356215 Jy
! Component: 200  -  total flux cleaned = 0.00396219 Jy
! Total flux subtracted in 200 components = 0.00396219 Jy
! Clean residual min=-0.000641 max=0.000750 Jy/beam
! Clean residual mean=-0.000011 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.0208362 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 42 components and 0.0208362 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023674Jy  sigma=0.016740
! Fit after  self-cal, rms=0.023631Jy  sigma=0.016709
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.12     FD        1.04     GB        1.09     HN        0.92     
!   KP        0.93     LA        1.08     MK        1.17     NL        1.04     
!   OV        1.05     PT        0.94     SC        0.94     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.98     GB        1.05     HN        0.97     
!   KP        0.93     LA        1.02     MK        1.16     NL        1.12     
!   OV        1.09     PT        0.97     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.09     FD        0.88     GB        1.11     HN        0.92     
!   KP        0.93     LA        0.99     MK        1.03     NL        1.05     
!   OV        1.02     PT        0.97     SC        0.96     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.90     GB        1.13     HN        0.90     
!   KP        0.84     LA        1.06     MK        1.05     NL        1.15     
!   OV        1.04     PT        1.04     SC        1.02     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.80     GB        1.07     HN        0.85     
!   KP        0.91     LA        1.10     MK        0.99     NL        1.08     
!   OV        1.08     PT        0.96     SC        0.93     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.82     GB        1.21     HN        0.98     
!   KP        0.92     LA        1.11     MK        0.98     NL        0.97     
!   OV        0.98     PT        1.02     SC        0.97     
! 
! 
! Correcting IF 7.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.82     GB        1.22     HN        0.88     
!   KP        0.83     LA        1.08     MK        1.00*    NL        1.02     
!   OV        1.01     PT        1.09     SC        0.98     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.95     FD        0.77     GB        1.23     HN        0.88     
!   KP        0.96     LA        1.10     MK        0.87     NL        0.98     
!   OV        1.03     PT        1.02     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.023631Jy  sigma=0.016709
! Fit after  self-cal, rms=0.023129Jy  sigma=0.016634
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8379 mas, bmaj=1.797 mas, bpa=-10.82 degrees
! Estimated noise=6.04402 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000663362 Jy
! Component: 100  -  total flux cleaned = 0.000870873 Jy
! Component: 150  -  total flux cleaned = 0.00094544 Jy
! Component: 200  -  total flux cleaned = 0.000962821 Jy
! Total flux subtracted in 200 components = 0.000962821 Jy
! Clean residual min=-0.000521 max=0.000698 Jy/beam
! Clean residual mean=-0.000006 rms=0.000147 Jy/beam
! Combined flux in latest and established models = 0.021799 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 68 components and 0.021799 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023108Jy  sigma=0.016621
! Fit after  self-cal, rms=0.023142Jy  sigma=0.016605
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023142Jy  sigma=0.016605
! Fit after  self-cal, rms=0.023431Jy  sigma=0.016583
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8336 mas, bmaj=1.788 mas, bpa=-10.42 degrees
! Estimated noise=6.05217 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000421815 Jy
! Component: 100  -  total flux cleaned = 0.000594238 Jy
! Component: 150  -  total flux cleaned = 0.000622183 Jy
! Component: 200  -  total flux cleaned = 0.000628339 Jy
! Total flux subtracted in 200 components = 0.000628339 Jy
! Clean residual min=-0.000518 max=0.000542 Jy/beam
! Clean residual mean=-0.000006 rms=0.000136 Jy/beam
! Combined flux in latest and established models = 0.0224273 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 81 components and 0.0224273 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023422Jy  sigma=0.016578
! Fit after  self-cal, rms=0.023447Jy  sigma=0.016573
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.75657e-05 Jy
! Component: 100  -  total flux cleaned = 7.3964e-05 Jy
! Component: 150  -  total flux cleaned = 7.40434e-05 Jy
! Component: 200  -  total flux cleaned = 6.93142e-05 Jy
! Total flux subtracted in 200 components = 6.93142e-05 Jy
! Clean residual min=-0.000503 max=0.000541 Jy/beam
! Clean residual mean=-0.000007 rms=0.000136 Jy/beam
! Combined flux in latest and established models = 0.0224966 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 93 components and 0.0224966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023444Jy  sigma=0.016571
! Fit after  self-cal, rms=0.023443Jy  sigma=0.016569
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023443Jy  sigma=0.016569
! Fit after  self-cal, rms=0.023562Jy  sigma=0.016567
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8288 mas, bmaj=1.782 mas, bpa=-10.35 degrees
! Estimated noise=6.04802 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000219281 Jy
! Component: 100  -  total flux cleaned = 0.000247557 Jy
! Component: 150  -  total flux cleaned = 0.000247639 Jy
! Component: 200  -  total flux cleaned = 0.000247921 Jy
! Total flux subtracted in 200 components = 0.000247921 Jy
! Clean residual min=-0.000497 max=0.000539 Jy/beam
! Clean residual mean=-0.000006 rms=0.000134 Jy/beam
! Combined flux in latest and established models = 0.0227446 Jy
selfcal
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 104 components and 0.0227446 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023560Jy  sigma=0.016565
! Fit after  self-cal, rms=0.023568Jy  sigma=0.016564
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.71907e-05 Jy
! Component: 100  -  total flux cleaned = 1.80922e-05 Jy
! Component: 150  -  total flux cleaned = 1.01717e-05 Jy
! Component: 200  -  total flux cleaned = 3.12484e-06 Jy
! Total flux subtracted in 200 components = 3.12484e-06 Jy
! Clean residual min=-0.000493 max=0.000538 Jy/beam
! Clean residual mean=-0.000006 rms=0.000133 Jy/beam
! Combined flux in latest and established models = 0.0227477 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 112 components and 0.0227477 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023567Jy  sigma=0.016563
! Fit after  self-cal, rms=0.023567Jy  sigma=0.016563
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023567Jy  sigma=0.016563
! Fit after  self-cal, rms=0.023623Jy  sigma=0.016563
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.254 mas, bmaj=2.177 mas, bpa=-12.68 degrees
! Estimated noise=6.81459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.59472e-05 Jy
! Component: 100  -  total flux cleaned = 0.000120469 Jy
! Component: 150  -  total flux cleaned = 0.000126637 Jy
! Component: 200  -  total flux cleaned = 0.000129069 Jy
! Total flux subtracted in 200 components = 0.000129069 Jy
! Clean residual min=-0.000538 max=0.000752 Jy/beam
! Clean residual mean=-0.000010 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.0228768 Jy
selfcal
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 141 components and 0.0228768 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023622Jy  sigma=0.016562
! Fit after  self-cal, rms=0.023626Jy  sigma=0.016562
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.66597e-06 Jy
! Component: 100  -  total flux cleaned = 2.33917e-06 Jy
! Component: 150  -  total flux cleaned = -7.13526e-08 Jy
! Component: 200  -  total flux cleaned = -3.9654e-06 Jy
! Total flux subtracted in 200 components = -3.9654e-06 Jy
! Clean residual min=-0.000531 max=0.000751 Jy/beam
! Clean residual mean=-0.000010 rms=0.000177 Jy/beam
! Combined flux in latest and established models = 0.0228728 Jy
! Performing phase self-cal
! Adding 47 model components to the UV plane model.
! The established model now contains 163 components and 0.0228728 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023625Jy  sigma=0.016562
! Fit after  self-cal, rms=0.023625Jy  sigma=0.016561
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8258 mas, bmaj=1.779 mas, bpa=-10.32 degrees
! Estimated noise=6.05016 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8258 x 1.779 at -10.32 degrees (North through East)
! Clean map  min=-0.0004727  max=0.016006 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6211 mas, bmaj=1.457 mas, bpa=-10.57 degrees
! Estimated noise=13.9433 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0122131 Jy
! Component: 100  -  total flux cleaned = 0.0155788 Jy
! Component: 150  -  total flux cleaned = 0.0177139 Jy
! Component: 200  -  total flux cleaned = 0.0192043 Jy
! Total flux subtracted in 200 components = 0.0192043 Jy
! Clean residual min=-0.001103 max=0.000958 Jy/beam
! Clean residual mean=0.000005 rms=0.000298 Jy/beam
! Combined flux in latest and established models = 0.0192043 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 20 model components to the UV plane model.
! The established model now contains 20 components and 0.0192043 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8258 mas, bmaj=1.779 mas, bpa=-10.32 degrees
! Estimated noise=6.05016 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0016779 Jy
! Component: 100  -  total flux cleaned = 0.00253257 Jy
! Component: 150  -  total flux cleaned = 0.00306528 Jy
! Component: 200  -  total flux cleaned = 0.00326837 Jy
! Total flux subtracted in 200 components = 0.00326837 Jy
! Clean residual min=-0.000607 max=0.000514 Jy/beam
! Clean residual mean=-0.000005 rms=0.000142 Jy/beam
! Combined flux in latest and established models = 0.0224727 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 50 components and 0.0224727 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.254 mas, bmaj=2.177 mas, bpa=-12.68 degrees
! Estimated noise=6.81459 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000230599 Jy
! Component: 100  -  total flux cleaned = 0.000257772 Jy
! Component: 150  -  total flux cleaned = 0.000293243 Jy
! Component: 200  -  total flux cleaned = 0.000333034 Jy
! Total flux subtracted in 200 components = 0.000333034 Jy
! Clean residual min=-0.000586 max=0.000744 Jy/beam
! Clean residual mean=-0.000010 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.0228057 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.46328e-05 Jy
! Component: 100  -  total flux cleaned = 1.87384e-05 Jy
! Component: 150  -  total flux cleaned = 2.23648e-05 Jy
! Component: 200  -  total flux cleaned = 2.22694e-05 Jy
! Total flux subtracted in 200 components = 2.22694e-05 Jy
! Clean residual min=-0.000562 max=0.000742 Jy/beam
! Clean residual mean=-0.000010 rms=0.000178 Jy/beam
! Combined flux in latest and established models = 0.022828 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 80 components and 0.022828 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8258 mas, bmaj=1.779 mas, bpa=-10.32 degrees
! Estimated noise=6.05016 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.9801e-05 Jy
! Component: 100  -  total flux cleaned = 5.21239e-05 Jy
! Component: 150  -  total flux cleaned = 7.03787e-05 Jy
! Component: 200  -  total flux cleaned = 7.04212e-05 Jy
! Total flux subtracted in 200 components = 7.04212e-05 Jy
! Clean residual min=-0.000501 max=0.000528 Jy/beam
! Clean residual mean=-0.000006 rms=0.000133 Jy/beam
! Combined flux in latest and established models = 0.0228984 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 95 components and 0.0228984 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.023626Jy  sigma=0.016562
! Fit after  self-cal, rms=0.023623Jy  sigma=0.016562
wmodel /scr/pima/s3111a_uvs/J1630+5221_X_map.mod
! Writing 95 model components to file: /scr/pima/s3111a_uvs/J1630+5221_X_map.mod
wobs /scr/pima/s3111a_uvs/J1630+5221_X_uvs.fits
! Writing UV FITS file: /scr/pima/s3111a_uvs/J1630+5221_X_uvs.fits
wwins /scr/pima/s3111a_uvs/J1630+5221_X_map.win
! wwins: Wrote 2 windows to /scr/pima/s3111a_uvs/J1630+5221_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000105187 Jy
! Component: 100  -  total flux cleaned = 0.0001221 Jy
! Component: 150  -  total flux cleaned = 0.000175118 Jy
! Component: 200  -  total flux cleaned = 0.000232411 Jy
! Component: 250  -  total flux cleaned = 0.000273402 Jy
! Component: 300  -  total flux cleaned = 0.000293094 Jy
! Component: 350  -  total flux cleaned = 0.000311968 Jy
! Component: 400  -  total flux cleaned = 0.000336619 Jy
! Component: 450  -  total flux cleaned = 0.000372625 Jy
! Component: 500  -  total flux cleaned = 0.000401919 Jy
! Component: 550  -  total flux cleaned = 0.000436263 Jy
! Component: 600  -  total flux cleaned = 0.000480963 Jy
! Component: 650  -  total flux cleaned = 0.000502906 Jy
! Component: 700  -  total flux cleaned = 0.000545944 Jy
! Component: 750  -  total flux cleaned = 0.000593258 Jy
! Component: 800  -  total flux cleaned = 0.000629339 Jy
! Component: 850  -  total flux cleaned = 0.000674858 Jy
! Component: 900  -  total flux cleaned = 0.000724429 Jy
! Component: 950  -  total flux cleaned = 0.000763482 Jy
! Component: 1000  -  total flux cleaned = 0.000816119 Jy
! Component: 1050  -  total flux cleaned = 0.000834883 Jy
! Component: 1100  -  total flux cleaned = 0.00086728 Jy
! Component: 1150  -  total flux cleaned = 0.000881023 Jy
! Component: 1200  -  total flux cleaned = 0.000917029 Jy
! Component: 1250  -  total flux cleaned = 0.000948036 Jy
! Component: 1300  -  total flux cleaned = 0.000952421 Jy
! Component: 1350  -  total flux cleaned = 0.000986865 Jy
! Component: 1400  -  total flux cleaned = 0.001008 Jy
! Component: 1450  -  total flux cleaned = 0.00103318 Jy
! Component: 1500  -  total flux cleaned = 0.00106203 Jy
! Component: 1550  -  total flux cleaned = 0.00108235 Jy
! Component: 1600  -  total flux cleaned = 0.00111447 Jy
! Component: 1650  -  total flux cleaned = 0.00113819 Jy
! Component: 1700  -  total flux cleaned = 0.00115382 Jy
! Component: 1750  -  total flux cleaned = 0.00119632 Jy
! Component: 1800  -  total flux cleaned = 0.00121918 Jy
! Component: 1850  -  total flux cleaned = 0.00124181 Jy
! Component: 1900  -  total flux cleaned = 0.00127158 Jy
! Component: 1950  -  total flux cleaned = 0.00129729 Jy
! Component: 2000  -  total flux cleaned = 0.00129727 Jy
! Total flux subtracted in 2048 components = 0.00131172 Jy
! Clean residual min=-0.000194 max=0.000199 Jy/beam
! Clean residual mean=-0.000001 rms=0.000081 Jy/beam
! Combined flux in latest and established models = 0.0242102 Jy
keep
! Adding 133 model components to the UV plane model.
! The established model now contains 228 components and 0.0242102 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s3111a_uvs/J1630+5221_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8258 x 1.779 at -10.32 degrees (North through East)
! Clean map  min=-0.00044914  max=0.015879 Jy/beam
! Writing clean map to FITS file: /scr/pima/s3111a_uvs/J1630+5221_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0158795 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 7.99682e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.51078 1.51078 3.02157 6.04314 12.0863 24.1725 48.3451 96.6902
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.015 
quit
! Quitting program
! Log file /scr/pima/s3111a_uvs/J1630+5221_X_uvs.log closed on Mon Jul 23 07:18:16 2012