! Started logfile: /scr/pima/s3111a_uvs/J1053+4929_X_uvs.log on Mon Jul 23 07:17:13 2012
obs /scr/pima/s3111a_uvs/J1053+4929_X_uva.fits
! Reading UV FITS file: /scr/pima/s3111a_uvs/J1053+4929_X_uva.fits
! AN table 1: 59 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.80678 visibilities/baseline/integration-bin.
! Found source: J1053+4929
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.41193e+09      1.6e+07          1      1.6e+07
!  02        2  8.42793e+09      1.6e+07          1      1.6e+07
!  03        3  8.52393e+09      1.6e+07          1      1.6e+07
!  04        4  8.57193e+09      1.6e+07          1      1.6e+07
!  05        5  8.65193e+09      1.6e+07          1      1.6e+07
!  06        6  8.82793e+09      1.6e+07          1      1.6e+07
!  07        7  8.85993e+09      1.6e+07          1      1.6e+07
!  08        8  8.89193e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 20944 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.1 
print "taper_size =",taper_size
! taper_size = 120 
![@/home/lpetrov/bin/01_muppet /scr/pima/s3111a_uvs/J1053+4929_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.100x0.100 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 181 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 63 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.001087Jy  sigma=0.707874
! Fit after  self-cal, rms=0.979231Jy  sigma=0.692416
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6939 mas, bmaj=1.626 mas, bpa=-24.52 degrees
! Estimated noise=16.6594 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0156391 Jy
! Component: 100  -  total flux cleaned = 0.0197332 Jy
! Total flux subtracted in 100 components = 0.0197332 Jy
! Clean residual min=-0.001527 max=0.002780 Jy/beam
! Clean residual mean=0.000007 rms=0.000482 Jy/beam
! Combined flux in latest and established models = 0.0197332 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0197332 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028775Jy  sigma=0.020347
! Fit after  self-cal, rms=0.026092Jy  sigma=0.018450
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00417859 Jy
! Component: 100  -  total flux cleaned = 0.00601163 Jy
! Total flux subtracted in 100 components = 0.00601163 Jy
! Clean residual min=-0.001631 max=0.003366 Jy/beam
! Clean residual mean=0.000001 rms=0.000512 Jy/beam
! Combined flux in latest and established models = 0.0257448 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.0257448 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025220Jy  sigma=0.017833
! Fit after  self-cal, rms=0.025215Jy  sigma=0.017829
! Inverting map 
! Added new window around map position (1.7, -0.7).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00276808 Jy
! Component: 100  -  total flux cleaned = 0.00406282 Jy
! Total flux subtracted in 100 components = 0.00406282 Jy
! Clean residual min=-0.001505 max=0.001560 Jy/beam
! Clean residual mean=-0.000007 rms=0.000426 Jy/beam
! Combined flux in latest and established models = 0.0298076 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 25 components and 0.0298076 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024894Jy  sigma=0.017603
! Fit after  self-cal, rms=0.024855Jy  sigma=0.017575
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9251 mas, bmaj=2.019 mas, bpa=-21.4 degrees
! Estimated noise=7.08013 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0015547 Jy
! Component: 100  -  total flux cleaned = 0.00249754 Jy
! Component: 150  -  total flux cleaned = 0.00289559 Jy
! Component: 200  -  total flux cleaned = 0.00307829 Jy
! Total flux subtracted in 200 components = 0.00307829 Jy
! Clean residual min=-0.000861 max=0.001201 Jy/beam
! Clean residual mean=-0.000034 rms=0.000288 Jy/beam
! Combined flux in latest and established models = 0.0328859 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 42 components and 0.0328859 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024747Jy  sigma=0.017499
! Fit after  self-cal, rms=0.024738Jy  sigma=0.017492
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.24     FD        0.98     GB        0.91     HN        0.88     
!   KP        0.90     LA        1.05     MK        1.06     NL        1.08     
!   OV        1.12     PT        0.96     SC        1.01     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.15     FD        0.97     GB        0.90     HN        0.99     
!   KP        0.86     LA        1.07     MK        1.03     NL        1.07     
!   OV        1.09     PT        0.97     SC        1.00     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.10     FD        0.92     GB        0.90     HN        0.86     
!   KP        0.93     LA        1.07     MK        0.93     NL        1.09     
!   OV        1.05     PT        1.00     SC        0.99     
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.13     FD        0.95     GB        0.92     HN        0.87     
!   KP        0.84     LA        1.09     MK        1.05     NL        1.10     
!   OV        1.13     PT        0.97     SC        1.14     
! 
! 
! Correcting IF 5.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        0.84     GB        0.87     HN        0.86     
!   KP        0.87     LA        1.06     MK        0.90     NL        1.04     
!   OV        1.23     PT        1.00     SC        1.04     
! 
! 
! Correcting IF 6.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.18     FD        0.89     GB        0.94     HN        0.90     
!   KP        0.86     LA        1.06     MK        0.99     NL        1.07     
!   OV        1.06     PT        1.04     SC        1.04     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.91     GB        0.89     HN        0.93     
!   KP        0.79     LA        1.14     MK        1.00*    NL        1.16     
!   OV        1.15     PT        1.02     SC        1.04     
! 
! 
! Correcting IF 8.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.94     GB        0.89     HN        0.96     
!   KP        0.88     LA        1.11     MK        0.92     NL        1.09     
!   OV        1.06     PT        1.01     SC        0.95     
! 
! 
! Fit before self-cal, rms=0.024738Jy  sigma=0.017492
! Fit after  self-cal, rms=0.024931Jy  sigma=0.017322
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9126 mas, bmaj=2.003 mas, bpa=-21.57 degrees
! Estimated noise=7.02184 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.03388e-05 Jy
! Component: 100  -  total flux cleaned = 5.87788e-05 Jy
! Component: 150  -  total flux cleaned = 4.49609e-05 Jy
! Component: 200  -  total flux cleaned = 5.11991e-05 Jy
! Total flux subtracted in 200 components = 5.11991e-05 Jy
! Clean residual min=-0.000633 max=0.000909 Jy/beam
! Clean residual mean=-0.000007 rms=0.000205 Jy/beam
! Combined flux in latest and established models = 0.0329371 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 58 components and 0.0329371 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024925Jy  sigma=0.017318
! Fit after  self-cal, rms=0.024970Jy  sigma=0.017307
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.024970Jy  sigma=0.017307
! Fit after  self-cal, rms=0.025265Jy  sigma=0.017287
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9093 mas, bmaj=2.002 mas, bpa=-21.32 degrees
! Estimated noise=7.04862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.25143e-05 Jy
! Component: 100  -  total flux cleaned = 0.000122541 Jy
! Component: 150  -  total flux cleaned = 0.000116432 Jy
! Component: 200  -  total flux cleaned = 0.000111255 Jy
! Total flux subtracted in 200 components = 0.000111255 Jy
! Clean residual min=-0.000545 max=0.000874 Jy/beam
! Clean residual mean=-0.000008 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.0330484 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 74 components and 0.0330484 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025261Jy  sigma=0.017284
! Fit after  self-cal, rms=0.025271Jy  sigma=0.017283
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-11.9, -11.7).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000754399 Jy
! Component: 100  -  total flux cleaned = 0.000893031 Jy
! Component: 150  -  total flux cleaned = 0.000971554 Jy
! Component: 200  -  total flux cleaned = 0.0010535 Jy
! Total flux subtracted in 200 components = 0.0010535 Jy
! Clean residual min=-0.000496 max=0.000713 Jy/beam
! Clean residual mean=-0.000005 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.0341019 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 109 components and 0.0341019 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025242Jy  sigma=0.017265
! Fit after  self-cal, rms=0.025238Jy  sigma=0.017263
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025238Jy  sigma=0.017263
! Fit after  self-cal, rms=0.025320Jy  sigma=0.017260
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9076 mas, bmaj=2.003 mas, bpa=-21.21 degrees
! Estimated noise=7.06474 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00033127 Jy
! Component: 100  -  total flux cleaned = 0.000434143 Jy
! Component: 150  -  total flux cleaned = 0.00048461 Jy
! Component: 200  -  total flux cleaned = 0.000506193 Jy
! Total flux subtracted in 200 components = 0.000506193 Jy
! Clean residual min=-0.000489 max=0.000668 Jy/beam
! Clean residual mean=-0.000003 rms=0.000180 Jy/beam
! Combined flux in latest and established models = 0.0346081 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 121 components and 0.0346081 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025311Jy  sigma=0.017256
! Fit after  self-cal, rms=0.025310Jy  sigma=0.017255
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000113088 Jy
! Component: 100  -  total flux cleaned = 0.000126174 Jy
! Component: 150  -  total flux cleaned = 0.000144044 Jy
! Component: 200  -  total flux cleaned = 0.000149645 Jy
! Total flux subtracted in 200 components = 0.000149645 Jy
! Clean residual min=-0.000485 max=0.000663 Jy/beam
! Clean residual mean=-0.000003 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.0347577 Jy
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 129 components and 0.0347577 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025307Jy  sigma=0.017254
! Fit after  self-cal, rms=0.025307Jy  sigma=0.017253
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025307Jy  sigma=0.017253
! Fit after  self-cal, rms=0.025394Jy  sigma=0.017252
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.349 mas, bmaj=2.371 mas, bpa=-21.45 degrees
! Estimated noise=7.80686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000120018 Jy
! Component: 100  -  total flux cleaned = 0.000133146 Jy
! Component: 150  -  total flux cleaned = 0.00011875 Jy
! Component: 200  -  total flux cleaned = 9.73031e-05 Jy
! Total flux subtracted in 200 components = 9.73031e-05 Jy
! Clean residual min=-0.000652 max=0.000737 Jy/beam
! Clean residual mean=-0.000004 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.034855 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 148 components and 0.034855 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025392Jy  sigma=0.017251
! Fit after  self-cal, rms=0.025391Jy  sigma=0.017251
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.68373e-05 Jy
! Component: 100  -  total flux cleaned = 5.3167e-06 Jy
! Component: 150  -  total flux cleaned = -1.64839e-06 Jy
! Component: 200  -  total flux cleaned = -4.83336e-06 Jy
! Total flux subtracted in 200 components = -4.83336e-06 Jy
! Clean residual min=-0.000649 max=0.000736 Jy/beam
! Clean residual mean=-0.000004 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0348502 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 155 components and 0.0348502 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025390Jy  sigma=0.017250
! Fit after  self-cal, rms=0.025390Jy  sigma=0.017250
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9062 mas, bmaj=2.003 mas, bpa=-21.15 degrees
! Estimated noise=7.08515 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9062 x 2.003 at -21.15 degrees (North through East)
! Clean map  min=-0.00046715  max=0.024174 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6795 mas, bmaj=1.604 mas, bpa=-24.37 degrees
! Estimated noise=16.5189 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0178127 Jy
! Component: 100  -  total flux cleaned = 0.023355 Jy
! Component: 150  -  total flux cleaned = 0.0266553 Jy
! Component: 200  -  total flux cleaned = 0.0288198 Jy
! Total flux subtracted in 200 components = 0.0288198 Jy
! Clean residual min=-0.001288 max=0.001211 Jy/beam
! Clean residual mean=0.000008 rms=0.000372 Jy/beam
! Combined flux in latest and established models = 0.0288198 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.0288198 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9062 mas, bmaj=2.003 mas, bpa=-21.15 degrees
! Estimated noise=7.08515 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00205123 Jy
! Component: 100  -  total flux cleaned = 0.00319153 Jy
! Component: 150  -  total flux cleaned = 0.00398253 Jy
! Component: 200  -  total flux cleaned = 0.00439521 Jy
! Total flux subtracted in 200 components = 0.00439521 Jy
! Clean residual min=-0.000575 max=0.000662 Jy/beam
! Clean residual mean=-0.000002 rms=0.000200 Jy/beam
! Combined flux in latest and established models = 0.033215 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 64 components and 0.033215 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.349 mas, bmaj=2.371 mas, bpa=-21.45 degrees
! Estimated noise=7.80686 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000634812 Jy
! Component: 100  -  total flux cleaned = 0.000918318 Jy
! Component: 150  -  total flux cleaned = 0.00103795 Jy
! Component: 200  -  total flux cleaned = 0.00112669 Jy
! Total flux subtracted in 200 components = 0.00112669 Jy
! Clean residual min=-0.000654 max=0.000779 Jy/beam
! Clean residual mean=-0.000003 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.0343417 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.76331e-05 Jy
! Component: 100  -  total flux cleaned = 0.000145078 Jy
! Component: 150  -  total flux cleaned = 0.000203826 Jy
! Component: 200  -  total flux cleaned = 0.000233207 Jy
! Total flux subtracted in 200 components = 0.000233207 Jy
! Clean residual min=-0.000647 max=0.000769 Jy/beam
! Clean residual mean=-0.000003 rms=0.000223 Jy/beam
! Combined flux in latest and established models = 0.0345749 Jy
! Adding 59 model components to the UV plane model.
! The established model now contains 118 components and 0.0345749 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9062 mas, bmaj=2.003 mas, bpa=-21.15 degrees
! Estimated noise=7.08515 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.40181e-05 Jy
! Component: 100  -  total flux cleaned = 8.78264e-05 Jy
! Component: 150  -  total flux cleaned = 0.000118734 Jy
! Component: 200  -  total flux cleaned = 0.000146401 Jy
! Total flux subtracted in 200 components = 0.000146401 Jy
! Clean residual min=-0.000475 max=0.000662 Jy/beam
! Clean residual mean=-0.000002 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.0347213 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 136 components and 0.0347213 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.025394Jy  sigma=0.017253
! Fit after  self-cal, rms=0.025393Jy  sigma=0.017252
wmodel /scr/pima/s3111a_uvs/J1053+4929_X_map.mod
! Writing 136 model components to file: /scr/pima/s3111a_uvs/J1053+4929_X_map.mod
wobs /scr/pima/s3111a_uvs/J1053+4929_X_uvs.fits
! Writing UV FITS file: /scr/pima/s3111a_uvs/J1053+4929_X_uvs.fits
wwins /scr/pima/s3111a_uvs/J1053+4929_X_map.win
! wwins: Wrote 3 windows to /scr/pima/s3111a_uvs/J1053+4929_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000291269 Jy
! Component: 100  -  total flux cleaned = 0.00054375 Jy
! Component: 150  -  total flux cleaned = 0.000711463 Jy
! Component: 200  -  total flux cleaned = 0.000799351 Jy
! Component: 250  -  total flux cleaned = 0.000841387 Jy
! Component: 300  -  total flux cleaned = 0.000889878 Jy
! Component: 350  -  total flux cleaned = 0.00092119 Jy
! Component: 400  -  total flux cleaned = 0.000966975 Jy
! Component: 450  -  total flux cleaned = 0.00104867 Jy
! Component: 500  -  total flux cleaned = 0.00108484 Jy
! Component: 550  -  total flux cleaned = 0.00113449 Jy
! Component: 600  -  total flux cleaned = 0.00115532 Jy
! Component: 650  -  total flux cleaned = 0.0011961 Jy
! Component: 700  -  total flux cleaned = 0.00121613 Jy
! Component: 750  -  total flux cleaned = 0.00124242 Jy
! Component: 800  -  total flux cleaned = 0.00129369 Jy
! Component: 850  -  total flux cleaned = 0.00131871 Jy
! Component: 900  -  total flux cleaned = 0.00134337 Jy
! Component: 950  -  total flux cleaned = 0.00136175 Jy
! Component: 1000  -  total flux cleaned = 0.00140364 Jy
! Component: 1050  -  total flux cleaned = 0.00141542 Jy
! Component: 1100  -  total flux cleaned = 0.00143862 Jy
! Component: 1150  -  total flux cleaned = 0.00146139 Jy
! Component: 1200  -  total flux cleaned = 0.00147258 Jy
! Component: 1250  -  total flux cleaned = 0.00150574 Jy
! Component: 1300  -  total flux cleaned = 0.00150027 Jy
! Component: 1350  -  total flux cleaned = 0.00152734 Jy
! Component: 1400  -  total flux cleaned = 0.00155919 Jy
! Component: 1450  -  total flux cleaned = 0.00156437 Jy
! Component: 1500  -  total flux cleaned = 0.001585 Jy
! Component: 1550  -  total flux cleaned = 0.00157993 Jy
! Component: 1600  -  total flux cleaned = 0.00159508 Jy
! Component: 1650  -  total flux cleaned = 0.0016248 Jy
! Component: 1700  -  total flux cleaned = 0.00161979 Jy
! Component: 1750  -  total flux cleaned = 0.00161489 Jy
! Component: 1800  -  total flux cleaned = 0.00160536 Jy
! Component: 1850  -  total flux cleaned = 0.00161958 Jy
! Component: 1900  -  total flux cleaned = 0.00161482 Jy
! Component: 1950  -  total flux cleaned = 0.00161481 Jy
! Component: 2000  -  total flux cleaned = 0.00160567 Jy
! Total flux subtracted in 2048 components = 0.00161021 Jy
! Clean residual min=-0.000226 max=0.000289 Jy/beam
! Clean residual mean=-0.000008 rms=0.000108 Jy/beam
! Combined flux in latest and established models = 0.0363315 Jy
keep
! Adding 174 model components to the UV plane model.
! The established model now contains 310 components and 0.0363315 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s3111a_uvs/J1053+4929_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9062 x 2.003 at -21.15 degrees (North through East)
! Clean map  min=-0.00043825  max=0.024173 Jy/beam
! Writing clean map to FITS file: /scr/pima/s3111a_uvs/J1053+4929_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0241726 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000106445 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.32106 1.32106 2.64211 5.28422 10.5684 21.1369 42.2738 84.5476
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0003 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.024 
quit
! Quitting program
! Log file /scr/pima/s3111a_uvs/J1053+4929_X_uvs.log closed on Mon Jul 23 07:17:15 2012