! Started logfile: /scr/pima/s3111a_uvs/J0033-1921_X_uvs.log on Mon Jul 23 07:15:13 2012
obs /scr/pima/s3111a_uvs/J0033-1921_X_uva.fits
! Reading UV FITS file: /scr/pima/s3111a_uvs/J0033-1921_X_uva.fits
! AN table 1: 70 integrations on 55 of 55 possible baselines.
! Apparent sampling: 0.847532 visibilities/baseline/integration-bin.
! Found source: J0033-1921
! 
! There are 8 IFs, and a total of 8 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.41193e+09      1.6e+07          1      1.6e+07
!  02        2  8.42793e+09      1.6e+07          1      1.6e+07
!  03        3  8.52393e+09      1.6e+07          1      1.6e+07
!  04        4  8.57193e+09      1.6e+07          1      1.6e+07
!  05        5  8.65193e+09      1.6e+07          1      1.6e+07
!  06        6  8.82793e+09      1.6e+07          1      1.6e+07
!  07        7  8.85993e+09      1.6e+07          1      1.6e+07
!  08        8  8.89193e+09      1.6e+07          1      1.6e+07
! 
! Polarization(s): RR
! 
! Read 0 lines of history.
! 
! Reading 26104 visibilities.
select RR
! Selecting polarization: RR,  channels: 1..8
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
! Reading IF 5 channels: 5..5
! Reading IF 6 channels: 6..6
! Reading IF 7 channels: 7..7
! Reading IF 8 channels: 8..8
print "field_size =",field_size
! field_size = 512 
print "field_cell =",field_cell
! field_cell = 0.1 
print "taper_size =",taper_size
! taper_size = 120 
![@/home/lpetrov/bin/01_muppet /scr/pima/s3111a_uvs/J0033-1921_X]
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
mapsize field_size, field_cell
! Map grid = 512x512 pixels with 0.100x0.100 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 5.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 6.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 7.
!  A total of 174 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 8.
!  A total of 68 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.000257Jy  sigma=0.700219
! Fit after  self-cal, rms=0.983842Jy  sigma=0.688685
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.6745 mas, bmaj=1.979 mas, bpa=1.468 degrees
! Estimated noise=17.2214 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.012415 Jy
! Component: 100  -  total flux cleaned = 0.0151735 Jy
! Total flux subtracted in 100 components = 0.0151735 Jy
! Clean residual min=-0.001385 max=0.001515 Jy/beam
! Clean residual mean=0.000008 rms=0.000447 Jy/beam
! Combined flux in latest and established models = 0.0151735 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.0151735 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.028855Jy  sigma=0.020341
! Fit after  self-cal, rms=0.027127Jy  sigma=0.019139
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00305613 Jy
! Component: 100  -  total flux cleaned = 0.0039764 Jy
! Total flux subtracted in 100 components = 0.0039764 Jy
! Clean residual min=-0.001350 max=0.001467 Jy/beam
! Clean residual mean=0.000006 rms=0.000443 Jy/beam
! Combined flux in latest and established models = 0.0191499 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 9 components and 0.0191499 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026735Jy  sigma=0.018863
! Fit after  self-cal, rms=0.026730Jy  sigma=0.018860
! Inverting map 
print "************** FINISHED UNIFORM WEIGHTING CLEAN **************"
! ************** FINISHED UNIFORM WEIGHTING CLEAN ************** 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8916 mas, bmaj=2.463 mas, bpa=1.583 degrees
! Estimated noise=6.37061 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000910212 Jy
! Component: 100  -  total flux cleaned = 0.00127608 Jy
! Component: 150  -  total flux cleaned = 0.00146635 Jy
! Component: 200  -  total flux cleaned = 0.00154256 Jy
! Total flux subtracted in 200 components = 0.00154256 Jy
! Clean residual min=-0.000672 max=0.001168 Jy/beam
! Clean residual mean=-0.000001 rms=0.000237 Jy/beam
! Combined flux in latest and established models = 0.0206924 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 30 components and 0.0206924 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026703Jy  sigma=0.018840
! Fit after  self-cal, rms=0.026701Jy  sigma=0.018839
! Inverting map 
print "************** FINISHED NATURAL WEIGHTING CLEAN **************"
! ************** FINISHED NATURAL WEIGHTING CLEAN ************** 
! 
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.17     FD        0.97     GB        1.12     HN        0.94     
!   KP        0.92     LA        0.99     MK        1.01     NL        1.09     
!   OV        1.02     PT        1.00     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.14     FD        0.90     GB        1.06     HN        0.96     
!   KP        0.90     LA        1.06     MK        1.06     NL        1.20     
!   OV        0.96     PT        1.00     SC        0.99     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.07     FD        0.86     GB        1.09     HN        0.90     
!   KP        0.96     LA        1.09     MK        1.03     NL        1.12     
!   OV        1.01     PT        1.04     SC        0.91     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.16     FD        0.93     GB        1.09     HN        0.94     
!   KP        0.88     LA        1.06     MK        0.95     NL        1.16     
!   OV        1.06     PT        1.02     SC        0.99     
! 
! 
! Correcting IF 5.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.20     FD        0.86     GB        1.04     HN        0.88     
!   KP        0.94     LA        1.05     MK        0.94     NL        1.20     
!   OV        1.06     PT        0.96     SC        1.00     
! 
! 
! Correcting IF 6.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.04     FD        0.83     GB        1.21     HN        0.94     
!   KP        0.89     LA        1.10     MK        1.00     NL        1.18     
!   OV        0.90     PT        1.00     SC        0.98     
! 
! 
! Correcting IF 7.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00*    FD        0.84     GB        1.20     HN        0.87     
!   KP        0.80     LA        1.03     MK        1.00*    NL        1.05     
!   OV        0.90     PT        1.15     SC        1.08     
! 
! 
! Correcting IF 8.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.98     FD        0.83     GB        1.19     HN        1.02     
!   KP        0.95     LA        1.00     MK        0.96     NL        1.13     
!   OV        0.96     PT        1.03     SC        1.03     
! 
! 
! Fit before self-cal, rms=0.026701Jy  sigma=0.018839
! Fit after  self-cal, rms=0.026471Jy  sigma=0.018726
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.8888 mas, bmaj=2.474 mas, bpa=1.439 degrees
! Estimated noise=6.37581 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00024887 Jy
! Component: 100  -  total flux cleaned = 0.000277375 Jy
! Component: 150  -  total flux cleaned = 0.000282239 Jy
! Component: 200  -  total flux cleaned = 0.00028655 Jy
! Total flux subtracted in 200 components = 0.00028655 Jy
! Clean residual min=-0.000531 max=0.000715 Jy/beam
! Clean residual mean=-0.000001 rms=0.000179 Jy/beam
! Combined flux in latest and established models = 0.020979 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 44 components and 0.020979 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026467Jy  sigma=0.018724
! Fit after  self-cal, rms=0.026523Jy  sigma=0.018710
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026523Jy  sigma=0.018710
! Fit after  self-cal, rms=0.026898Jy  sigma=0.018688
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8857 mas, bmaj=2.471 mas, bpa=1.3 degrees
! Estimated noise=6.39992 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000193187 Jy
! Component: 100  -  total flux cleaned = 0.000193357 Jy
! Component: 150  -  total flux cleaned = 0.000193621 Jy
! Component: 200  -  total flux cleaned = 0.000197453 Jy
! Total flux subtracted in 200 components = 0.000197453 Jy
! Clean residual min=-0.000501 max=0.000691 Jy/beam
! Clean residual mean=0.000001 rms=0.000171 Jy/beam
! Combined flux in latest and established models = 0.0211764 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 50 components and 0.0211764 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026895Jy  sigma=0.018687
! Fit after  self-cal, rms=0.026926Jy  sigma=0.018682
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 2.88774e-06 Jy
! Component: 100  -  total flux cleaned = -5.99909e-06 Jy
! Component: 150  -  total flux cleaned = -1.34805e-05 Jy
! Component: 200  -  total flux cleaned = -1.36367e-05 Jy
! Total flux subtracted in 200 components = -1.36367e-05 Jy
! Clean residual min=-0.000500 max=0.000683 Jy/beam
! Clean residual mean=0.000001 rms=0.000170 Jy/beam
! Combined flux in latest and established models = 0.0211628 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 51 components and 0.0211628 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026924Jy  sigma=0.018681
! Fit after  self-cal, rms=0.026925Jy  sigma=0.018681
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.026925Jy  sigma=0.018681
! Fit after  self-cal, rms=0.027161Jy  sigma=0.018679
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8838 mas, bmaj=2.469 mas, bpa=1.173 degrees
! Estimated noise=6.42766 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00018107 Jy
! Component: 100  -  total flux cleaned = 0.000193064 Jy
! Component: 150  -  total flux cleaned = 0.000189672 Jy
! Component: 200  -  total flux cleaned = 0.000189793 Jy
! Total flux subtracted in 200 components = 0.000189793 Jy
! Clean residual min=-0.000505 max=0.000644 Jy/beam
! Clean residual mean=0.000001 rms=0.000169 Jy/beam
! Combined flux in latest and established models = 0.0213526 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 54 components and 0.0213526 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027159Jy  sigma=0.018678
! Fit after  self-cal, rms=0.027168Jy  sigma=0.018677
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.01949e-05 Jy
! Component: 100  -  total flux cleaned = 3.75707e-06 Jy
! Component: 150  -  total flux cleaned = 1.02146e-06 Jy
! Component: 200  -  total flux cleaned = 9.81214e-07 Jy
! Total flux subtracted in 200 components = 9.81214e-07 Jy
! Clean residual min=-0.000501 max=0.000639 Jy/beam
! Clean residual mean=0.000001 rms=0.000168 Jy/beam
! Combined flux in latest and established models = 0.0213536 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 55 components and 0.0213536 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027166Jy  sigma=0.018677
! Fit after  self-cal, rms=0.027167Jy  sigma=0.018677
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027167Jy  sigma=0.018677
! Fit after  self-cal, rms=0.027278Jy  sigma=0.018676
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.319 mas, bmaj=3.271 mas, bpa=1.87 degrees
! Estimated noise=7.12342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000274858 Jy
! Component: 100  -  total flux cleaned = 0.000259577 Jy
! Component: 150  -  total flux cleaned = 0.000253542 Jy
! Component: 200  -  total flux cleaned = 0.000250702 Jy
! Total flux subtracted in 200 components = 0.000250702 Jy
! Clean residual min=-0.000532 max=0.000675 Jy/beam
! Clean residual mean=0.000001 rms=0.000201 Jy/beam
! Combined flux in latest and established models = 0.0216043 Jy
selfcal
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 58 components and 0.0216043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027277Jy  sigma=0.018676
! Fit after  self-cal, rms=0.027278Jy  sigma=0.018675
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.89654e-05 Jy
! Component: 100  -  total flux cleaned = 1.17707e-05 Jy
! Component: 150  -  total flux cleaned = 6.41193e-06 Jy
! Component: 200  -  total flux cleaned = 4.14892e-06 Jy
! Total flux subtracted in 200 components = 4.14892e-06 Jy
! Clean residual min=-0.000527 max=0.000674 Jy/beam
! Clean residual mean=0.000001 rms=0.000199 Jy/beam
! Combined flux in latest and established models = 0.0216084 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 60 components and 0.0216084 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027277Jy  sigma=0.018675
! Fit after  self-cal, rms=0.027276Jy  sigma=0.018675
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "************** FINISHED AMPLITUDE SELF-CAL **************"
! ************** FINISHED AMPLITUDE SELF-CAL ************** 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.8817 mas, bmaj=2.466 mas, bpa=1.085 degrees
! Estimated noise=6.44477 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8817 x 2.466 at 1.085 degrees (North through East)
! Clean map  min=-0.00047994  max=0.01942 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "************** CLEARING MODEL AND STARTING OVER **********"
! ************** CLEARING MODEL AND STARTING OVER ********** 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.6652 mas, bmaj=1.986 mas, bpa=0.9942 degrees
! Estimated noise=17.6222 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0149509 Jy
! Component: 100  -  total flux cleaned = 0.0182778 Jy
! Component: 150  -  total flux cleaned = 0.019483 Jy
! Component: 200  -  total flux cleaned = 0.0201713 Jy
! Total flux subtracted in 200 components = 0.0201713 Jy
! Clean residual min=-0.001309 max=0.001331 Jy/beam
! Clean residual mean=0.000005 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.0201713 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 12 model components to the UV plane model.
! The established model now contains 12 components and 0.0201713 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.8817 mas, bmaj=2.466 mas, bpa=1.085 degrees
! Estimated noise=6.44477 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.8, 1).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111611 Jy
! Component: 100  -  total flux cleaned = 0.00153915 Jy
! Component: 150  -  total flux cleaned = 0.00172568 Jy
! Component: 200  -  total flux cleaned = 0.00188151 Jy
! Total flux subtracted in 200 components = 0.00188151 Jy
! Clean residual min=-0.000518 max=0.000510 Jy/beam
! Clean residual mean=-0.000002 rms=0.000156 Jy/beam
! Combined flux in latest and established models = 0.0220528 Jy
! Adding 32 model components to the UV plane model.
! The established model now contains 44 components and 0.0220528 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 120 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.319 mas, bmaj=3.271 mas, bpa=1.87 degrees
! Estimated noise=7.12342 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000187953 Jy
! Component: 100  -  total flux cleaned = 0.000242827 Jy
! Component: 150  -  total flux cleaned = 0.000256284 Jy
! Component: 200  -  total flux cleaned = 0.000267841 Jy
! Total flux subtracted in 200 components = 0.000267841 Jy
! Clean residual min=-0.000511 max=0.000561 Jy/beam
! Clean residual mean=-0.000006 rms=0.000176 Jy/beam
! Combined flux in latest and established models = 0.0223206 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.0451e-05 Jy
! Component: 100  -  total flux cleaned = 2.00876e-05 Jy
! Component: 150  -  total flux cleaned = 3.30283e-05 Jy
! Component: 200  -  total flux cleaned = 4.09341e-05 Jy
! Total flux subtracted in 200 components = 4.09341e-05 Jy
! Clean residual min=-0.000518 max=0.000553 Jy/beam
! Clean residual mean=-0.000007 rms=0.000174 Jy/beam
! Combined flux in latest and established models = 0.0223616 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 82 components and 0.0223616 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.8817 mas, bmaj=2.466 mas, bpa=1.085 degrees
! Estimated noise=6.44477 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 1.69811e-05 Jy
! Component: 100  -  total flux cleaned = 2.60158e-05 Jy
! Component: 150  -  total flux cleaned = 2.99664e-05 Jy
! Component: 200  -  total flux cleaned = 3.74097e-05 Jy
! Total flux subtracted in 200 components = 3.74097e-05 Jy
! Clean residual min=-0.000515 max=0.000499 Jy/beam
! Clean residual mean=-0.000005 rms=0.000148 Jy/beam
! Combined flux in latest and established models = 0.022399 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 96 components and 0.022399 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Correcting IF 5.
! 
! Correcting IF 6.
! 
! Correcting IF 7.
! 
! Correcting IF 8.
! 
! Fit before self-cal, rms=0.027263Jy  sigma=0.018667
! Fit after  self-cal, rms=0.027259Jy  sigma=0.018661
wmodel /scr/pima/s3111a_uvs/J0033-1921_X_map.mod
! Writing 96 model components to file: /scr/pima/s3111a_uvs/J0033-1921_X_map.mod
wobs /scr/pima/s3111a_uvs/J0033-1921_X_uvs.fits
! Writing UV FITS file: /scr/pima/s3111a_uvs/J0033-1921_X_uvs.fits
wwins /scr/pima/s3111a_uvs/J0033-1921_X_map.win
! wwins: Wrote 2 windows to /scr/pima/s3111a_uvs/J0033-1921_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=2048  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 3.43039e-05 Jy
! Component: 100  -  total flux cleaned = 8.43067e-05 Jy
! Component: 150  -  total flux cleaned = 6.876e-05 Jy
! Component: 200  -  total flux cleaned = 3.86414e-05 Jy
! Component: 250  -  total flux cleaned = 9.75753e-06 Jy
! Component: 300  -  total flux cleaned = -1.78975e-05 Jy
! Component: 350  -  total flux cleaned = -5.11543e-05 Jy
! Component: 400  -  total flux cleaned = -7.6796e-05 Jy
! Component: 450  -  total flux cleaned = -0.000132896 Jy
! Component: 500  -  total flux cleaned = -0.000181161 Jy
! Component: 550  -  total flux cleaned = -0.000222289 Jy
! Component: 600  -  total flux cleaned = -0.000262551 Jy
! Component: 650  -  total flux cleaned = -0.000290442 Jy
! Component: 700  -  total flux cleaned = -0.000306751 Jy
! Component: 750  -  total flux cleaned = -0.000322661 Jy
! Component: 800  -  total flux cleaned = -0.000333014 Jy
! Component: 850  -  total flux cleaned = -0.000343167 Jy
! Component: 900  -  total flux cleaned = -0.000358205 Jy
! Component: 950  -  total flux cleaned = -0.000372888 Jy
! Component: 1000  -  total flux cleaned = -0.000382538 Jy
! Component: 1050  -  total flux cleaned = -0.000396836 Jy
! Component: 1100  -  total flux cleaned = -0.000415565 Jy
! Component: 1150  -  total flux cleaned = -0.000429341 Jy
! Component: 1200  -  total flux cleaned = -0.000456422 Jy
! Component: 1250  -  total flux cleaned = -0.000465304 Jy
! Component: 1300  -  total flux cleaned = -0.000487192 Jy
! Component: 1350  -  total flux cleaned = -0.000508781 Jy
! Component: 1400  -  total flux cleaned = -0.000525798 Jy
! Component: 1450  -  total flux cleaned = -0.000555133 Jy
! Component: 1500  -  total flux cleaned = -0.000563314 Jy
! Component: 1550  -  total flux cleaned = -0.000595935 Jy
! Component: 1600  -  total flux cleaned = -0.000628114 Jy
! Component: 1650  -  total flux cleaned = -0.000655895 Jy
! Component: 1700  -  total flux cleaned = -0.000675521 Jy
! Component: 1750  -  total flux cleaned = -0.000706532 Jy
! Component: 1800  -  total flux cleaned = -0.000740977 Jy
! Component: 1850  -  total flux cleaned = -0.000759883 Jy
! Component: 1900  -  total flux cleaned = -0.000786078 Jy
! Component: 1950  -  total flux cleaned = -0.000800933 Jy
! Component: 2000  -  total flux cleaned = -0.000819301 Jy
! Total flux subtracted in 2048 components = -0.000833863 Jy
! Clean residual min=-0.000210 max=0.000275 Jy/beam
! Clean residual mean=-0.000005 rms=0.000084 Jy/beam
! Combined flux in latest and established models = 0.0215651 Jy
keep
! Adding 156 model components to the UV plane model.
! The established model now contains 252 components and 0.0215651 Jy
![Exited script file: /home/lpetrov/bin/01_muppet]
wmap "/scr/pima/s3111a_uvs/J0033-1921_X\_map.fits"
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.8817 x 2.466 at 1.085 degrees (North through East)
! Clean map  min=-0.00041639  max=0.019419 Jy/beam
! Writing clean map to FITS file: /scr/pima/s3111a_uvs/J0033-1921_X_map.fits
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is",peak_flux
! The peak flux is 0.0194192 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 8.40206e-05 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -1.29801 1.29801 2.59601 5.19202 10.384 20.7681 41.5362 83.0724
print "clev=",int(3*image_rms*10000)/10000
! clev= 0.0002 
print "peak=",int(1000*peak_flux)/1000
! peak= 0.019 
quit
! Quitting program
! Log file /scr/pima/s3111a_uvs/J0033-1921_X_uvs.log closed on Mon Jul 23 07:15:15 2012