! Started logfile: /scr/pima/rv126_uvs/J2358-1020_S_dfm.log on Sun Dec 23 07:43:34 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.24075
obs     /scr/pima/rv126_uvs/J2358-1020_S_uva.fits
! Reading UV FITS file: /scr/pima/rv126_uvs/J2358-1020_S_uva.fits
! AN table 1: 66 integrations on 6 of 6 possible baselines.
! AN table 2: 42 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.414046 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2358-1020
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.24075e+09        8e+06          1        8e+06
!  02        2  2.27075e+09        8e+06          1        8e+06
!  03        3  2.36075e+09        8e+06          1        8e+06
!  04        4  2.38075e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 3160 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2358-1020_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 252 telescope corrections were flagged in sub-array 1.
!  A total of 202 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 252 telescope corrections were flagged in sub-array 1.
!  A total of 202 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 264 telescope corrections were flagged in sub-array 1.
!  A total of 378 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 252 telescope corrections were flagged in sub-array 1.
!  A total of 202 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.328756Jy  sigma=16.633922
! Fit after  self-cal, rms=0.241521Jy  sigma=3.309867
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.335 mas, bmaj=6.21 mas, bpa=-6.682 degrees
! Estimated noise=1.99735 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.680994 Jy
! Component: 100  -  total flux cleaned = 0.855995 Jy
! Total flux subtracted in 100 components = 0.855995 Jy
! Clean residual min=-0.039259 max=0.071778 Jy/beam
! Clean residual mean=-0.000146 rms=0.009662 Jy/beam
! Combined flux in latest and established models = 0.855995 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.855995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.220673Jy  sigma=2.746166
! Fit after  self-cal, rms=0.220627Jy  sigma=2.745911
! Inverting map 
! Added new window around map position (-1, 6).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0750232 Jy
! Component: 100  -  total flux cleaned = 0.104153 Jy
! Total flux subtracted in 100 components = 0.104153 Jy
! Clean residual min=-0.034685 max=0.046095 Jy/beam
! Clean residual mean=-0.000143 rms=0.008363 Jy/beam
! Combined flux in latest and established models = 0.960148 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 26 components and 0.960148 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.192228Jy  sigma=2.427234
! Fit after  self-cal, rms=0.192073Jy  sigma=2.425805
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.309 mas, bmaj=8.389 mas, bpa=-8.288 degrees
! Estimated noise=1.52943 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0285259 Jy
! Component: 100  -  total flux cleaned = 0.035533 Jy
! Component: 150  -  total flux cleaned = 0.0387993 Jy
! Component: 200  -  total flux cleaned = 0.0415212 Jy
! Total flux subtracted in 200 components = 0.0415212 Jy
! Clean residual min=-0.035944 max=0.039669 Jy/beam
! Clean residual mean=-0.000128 rms=0.008305 Jy/beam
! Combined flux in latest and established models = 1.00167 Jy
! Performing phase self-cal
! Adding 8 model components to the UV plane model.
! The established model now contains 30 components and 1.00167 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.187666Jy  sigma=2.352808
! Fit after  self-cal, rms=0.187423Jy  sigma=2.349983
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.309 x 8.389 at -8.288 degrees (North through East)
! Clean map  min=-0.03387  max=0.80818 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.00*    HN        0.00*    WN        0.00*    WZ        0.00*    
! 
!  A total of 36 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.09     FD        1.03     HN        0.91     KP        0.95     
!   LA        0.94     MK        1.05     NL        1.16     OV        0.93     
!   PT        1.06     
! 
! 
! Correcting IF 2.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.00*    HN        0.00*    WN        0.00*    WZ        0.00*    
! 
!  A total of 36 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.36     FD        1.07     HN        0.92     KP        0.95     
!   LA        0.95     MK        1.04     NL        1.11     OV        0.84     
!   PT        1.05     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.00*    HN        0.00*    WN        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    
! 
! 
! Correcting IF 4.
!  A total of 12 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   HH        0.00*    HN        0.00*    WN        0.00*    WZ        0.00*    
! 
!  A total of 36 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.17     FD        1.06     HN        0.89     KP        0.93     
!   LA        0.93     MK        1.07     NL        1.11     OV        0.91     
!   PT        1.07     
! 
! 
! Fit before self-cal, rms=0.187423Jy  sigma=2.349983
! Fit after  self-cal, rms=0.186850Jy  sigma=1.914999
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.488 mas, bmaj=14.85 mas, bpa=-14.51 degrees
! Estimated noise=1.6304 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (18.5, -51.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00744729 Jy
! Component: 100  -  total flux cleaned = 0.00066283 Jy
! Component: 150  -  total flux cleaned = -0.00641738 Jy
! Component: 200  -  total flux cleaned = -0.0104613 Jy
! Total flux subtracted in 200 components = -0.0104613 Jy
! Clean residual min=-0.021091 max=0.033080 Jy/beam
! Clean residual mean=-0.000042 rms=0.005327 Jy/beam
! Combined flux in latest and established models = 0.991207 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 51 components and 0.991207 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.175790Jy  sigma=1.791521
! Fit after  self-cal, rms=0.174946Jy  sigma=1.778153
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.174946Jy  sigma=1.778153
! Fit after  self-cal, rms=0.151493Jy  sigma=1.417526
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.491 mas, bmaj=15.13 mas, bpa=-14.55 degrees
! Estimated noise=1.65242 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00374703 Jy
! Component: 100  -  total flux cleaned = -0.00550071 Jy
! Component: 150  -  total flux cleaned = -0.00754505 Jy
! Component: 200  -  total flux cleaned = -0.00846786 Jy
! Total flux subtracted in 200 components = -0.00846786 Jy
! Clean residual min=-0.015681 max=0.015007 Jy/beam
! Clean residual mean=0.000008 rms=0.003703 Jy/beam
! Combined flux in latest and established models = 0.98274 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 71 components and 0.98274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.144498Jy  sigma=1.359922
! Fit after  self-cal, rms=0.144278Jy  sigma=1.355412
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00202608 Jy
! Component: 100  -  total flux cleaned = -0.00239084 Jy
! Component: 150  -  total flux cleaned = -0.00274722 Jy
! Component: 200  -  total flux cleaned = -0.00309854 Jy
! Total flux subtracted in 200 components = -0.00309854 Jy
! Clean residual min=-0.014281 max=0.014802 Jy/beam
! Clean residual mean=0.000012 rms=0.003590 Jy/beam
! Combined flux in latest and established models = 0.979641 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 84 components and 0.979641 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141574Jy  sigma=1.336107
! Fit after  self-cal, rms=0.141518Jy  sigma=1.334944
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.141518Jy  sigma=1.334944
! Fit after  self-cal, rms=0.088672Jy  sigma=0.950553
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.497 mas, bmaj=15.08 mas, bpa=-14.27 degrees
! Estimated noise=1.64991 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00126439 Jy
! Component: 100  -  total flux cleaned = -0.00124459 Jy
! Component: 150  -  total flux cleaned = -0.00122217 Jy
! Component: 200  -  total flux cleaned = -0.0012093 Jy
! Total flux subtracted in 200 components = -0.0012093 Jy
! Clean residual min=-0.007805 max=0.006786 Jy/beam
! Clean residual mean=0.000008 rms=0.001927 Jy/beam
! Combined flux in latest and established models = 0.978432 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 101 components and 0.978432 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.086712Jy  sigma=0.927460
! Fit after  self-cal, rms=0.086583Jy  sigma=0.925939
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000476622 Jy
! Component: 100  -  total flux cleaned = 0.000472391 Jy
! Component: 150  -  total flux cleaned = 9.07516e-05 Jy
! Component: 200  -  total flux cleaned = -0.000263593 Jy
! Total flux subtracted in 200 components = -0.000263593 Jy
! Clean residual min=-0.007806 max=0.006665 Jy/beam
! Clean residual mean=0.000008 rms=0.001860 Jy/beam
! Combined flux in latest and established models = 0.978168 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 113 components and 0.978168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085680Jy  sigma=0.915553
! Fit after  self-cal, rms=0.085619Jy  sigma=0.915141
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085619Jy  sigma=0.915141
! Fit after  self-cal, rms=0.086057Jy  sigma=0.910964
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.006 mas, bmaj=16.84 mas, bpa=-5.724 degrees
! Estimated noise=1.83655 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00201758 Jy
! Component: 100  -  total flux cleaned = -0.00202672 Jy
! Component: 150  -  total flux cleaned = -0.00170382 Jy
! Component: 200  -  total flux cleaned = -0.00195451 Jy
! Total flux subtracted in 200 components = -0.00195451 Jy
! Clean residual min=-0.007629 max=0.006314 Jy/beam
! Clean residual mean=0.000024 rms=0.001967 Jy/beam
! Combined flux in latest and established models = 0.976214 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 130 components and 0.976214 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.085323Jy  sigma=0.903210
! Fit after  self-cal, rms=0.085236Jy  sigma=0.902323
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000190654 Jy
! Component: 100  -  total flux cleaned = 5.55526e-05 Jy
! Component: 150  -  total flux cleaned = 0.0001651 Jy
! Component: 200  -  total flux cleaned = 6.05529e-05 Jy
! Total flux subtracted in 200 components = 6.05529e-05 Jy
! Clean residual min=-0.007348 max=0.006176 Jy/beam
! Clean residual mean=0.000023 rms=0.001926 Jy/beam
! Combined flux in latest and established models = 0.976275 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 145 components and 0.976275 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084897Jy  sigma=0.899028
! Fit after  self-cal, rms=0.084873Jy  sigma=0.898876
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.503 mas, bmaj=15.11 mas, bpa=-14.25 degrees
! Estimated noise=1.6488 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.503 x 15.11 at -14.25 degrees (North through East)
! Clean map  min=-0.0074524  max=0.92083 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.084873Jy  sigma=0.898876
! Fit after  self-cal, rms=0.081421Jy  sigma=0.844791
! Inverting map and beam 
! Estimated beam: bmin=4.503 mas, bmaj=15.12 mas, bpa=-14.24 degrees
! Estimated noise=1.64719 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00197235 Jy
! Component: 100  -  total flux cleaned = -0.00214545 Jy
! Component: 150  -  total flux cleaned = -0.00230186 Jy
! Component: 200  -  total flux cleaned = -0.00230254 Jy
! Total flux subtracted in 200 components = -0.00230254 Jy
! Clean residual min=-0.007657 max=0.006314 Jy/beam
! Clean residual mean=0.000019 rms=0.001681 Jy/beam
! Combined flux in latest and established models = 0.973972 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 156 components and 0.973972 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080710Jy  sigma=0.836746
! Fit after  self-cal, rms=0.080672Jy  sigma=0.836562
! Inverting map 
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000167403 Jy
! Component: 100  -  total flux cleaned = 0.000165289 Jy
! Component: 150  -  total flux cleaned = 0.000159734 Jy
! Component: 200  -  total flux cleaned = 3.7561e-05 Jy
! Total flux subtracted in 200 components = 3.7561e-05 Jy
! Clean residual min=-0.007529 max=0.006213 Jy/beam
! Clean residual mean=0.000019 rms=0.001649 Jy/beam
! Combined flux in latest and established models = 0.97401 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 164 components and 0.97401 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080211Jy  sigma=0.831664
! Fit after  self-cal, rms=0.080186Jy  sigma=0.831525
! Inverting map 
! Performing amp+phase self-cal
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080186Jy  sigma=0.831525
! Fit after  self-cal, rms=0.080512Jy  sigma=0.829989
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.497 mas, bmaj=13.72 mas, bpa=-14.79 degrees
! Estimated noise=2.1281 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.711087 Jy
! Component: 100  -  total flux cleaned = 0.867698 Jy
! Component: 150  -  total flux cleaned = 0.9171 Jy
! Component: 200  -  total flux cleaned = 0.942139 Jy
! Total flux subtracted in 200 components = 0.942139 Jy
! Clean residual min=-0.008982 max=0.014583 Jy/beam
! Clean residual mean=-0.000008 rms=0.002331 Jy/beam
! Combined flux in latest and established models = 0.942139 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 24 model components to the UV plane model.
! The established model now contains 24 components and 0.942139 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.505 mas, bmaj=15.16 mas, bpa=-14.23 degrees
! Estimated noise=1.64657 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0.5, -8.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0199559 Jy
! Component: 100  -  total flux cleaned = 0.0292436 Jy
! Component: 150  -  total flux cleaned = 0.0325205 Jy
! Component: 200  -  total flux cleaned = 0.0338307 Jy
! Total flux subtracted in 200 components = 0.0338307 Jy
! Clean residual min=-0.006747 max=0.006073 Jy/beam
! Clean residual mean=0.000022 rms=0.001628 Jy/beam
! Combined flux in latest and established models = 0.975969 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 56 components and 0.975969 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.01 mas, bmaj=16.89 mas, bpa=-5.757 degrees
! Estimated noise=1.8327 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00223684 Jy
! Component: 100  -  total flux cleaned = 0.00272078 Jy
! Component: 150  -  total flux cleaned = 0.00285402 Jy
! Component: 200  -  total flux cleaned = 0.00246615 Jy
! Total flux subtracted in 200 components = 0.00246615 Jy
! Clean residual min=-0.006489 max=0.006013 Jy/beam
! Clean residual mean=0.000025 rms=0.001719 Jy/beam
! Combined flux in latest and established models = 0.978436 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00011485 Jy
! Component: 100  -  total flux cleaned = -0.000327051 Jy
! Component: 150  -  total flux cleaned = -0.000327672 Jy
! Component: 200  -  total flux cleaned = -0.000422628 Jy
! Total flux subtracted in 200 components = -0.000422628 Jy
! Clean residual min=-0.006411 max=0.005848 Jy/beam
! Clean residual mean=0.000024 rms=0.001688 Jy/beam
! Combined flux in latest and established models = 0.978013 Jy
! Adding 48 model components to the UV plane model.
! The established model now contains 102 components and 0.978013 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.505 mas, bmaj=15.16 mas, bpa=-14.23 degrees
! Estimated noise=1.64657 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000814194 Jy
! Component: 100  -  total flux cleaned = -0.000966342 Jy
! Component: 150  -  total flux cleaned = -0.00138149 Jy
! Component: 200  -  total flux cleaned = -0.00150773 Jy
! Total flux subtracted in 200 components = -0.00150773 Jy
! Clean residual min=-0.006181 max=0.005843 Jy/beam
! Clean residual mean=0.000014 rms=0.001509 Jy/beam
! Combined flux in latest and established models = 0.976505 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 124 components and 0.976505 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078241Jy  sigma=0.814241
! Fit after  self-cal, rms=0.077887Jy  sigma=0.809849
wmodel J2358-1020_S_map.mod
! Writing 124 model components to file: J2358-1020_S_map.mod
wobs   J2358-1020_S_uvs.fits
! Writing UV FITS file: J2358-1020_S_uvs.fits
wwins  J2358-1020_S_map.win
! wwins: Wrote 4 windows to J2358-1020_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.00215906 Jy
! Component: 100  -  total flux cleaned = -0.00363105 Jy
! Component: 150  -  total flux cleaned = -0.00381786 Jy
! Component: 200  -  total flux cleaned = -0.0034603 Jy
! Component: 250  -  total flux cleaned = -0.0031133 Jy
! Component: 300  -  total flux cleaned = -0.00285936 Jy
! Component: 350  -  total flux cleaned = -0.00252728 Jy
! Component: 400  -  total flux cleaned = -0.00196052 Jy
! Component: 450  -  total flux cleaned = -0.00156403 Jy
! Component: 500  -  total flux cleaned = -0.000942149 Jy
! Component: 550  -  total flux cleaned = -0.000713285 Jy
! Component: 600  -  total flux cleaned = -0.000336535 Jy
! Component: 650  -  total flux cleaned = -0.000188253 Jy
! Component: 700  -  total flux cleaned = 0.000103522 Jy
! Component: 750  -  total flux cleaned = 0.00017455 Jy
! Component: 800  -  total flux cleaned = 3.23178e-05 Jy
! Component: 850  -  total flux cleaned = 3.4222e-05 Jy
! Component: 900  -  total flux cleaned = 0.000312995 Jy
! Component: 950  -  total flux cleaned = 0.000176876 Jy
! Component: 1000  -  total flux cleaned = 0.000380018 Jy
! Component: 1050  -  total flux cleaned = 0.000245497 Jy
! Component: 1100  -  total flux cleaned = -1.86158e-05 Jy
! Component: 1150  -  total flux cleaned = 4.81506e-05 Jy
! Component: 1200  -  total flux cleaned = -1.73971e-05 Jy
! Component: 1250  -  total flux cleaned = -0.000146337 Jy
! Component: 1300  -  total flux cleaned = -0.000272608 Jy
! Component: 1350  -  total flux cleaned = -8.4003e-05 Jy
! Component: 1400  -  total flux cleaned = -0.000271394 Jy
! Component: 1450  -  total flux cleaned = -0.000271755 Jy
! Component: 1500  -  total flux cleaned = -0.000148857 Jy
! Component: 1550  -  total flux cleaned = -0.000210112 Jy
! Component: 1600  -  total flux cleaned = -0.000210307 Jy
! Component: 1650  -  total flux cleaned = -0.000269998 Jy
! Component: 1700  -  total flux cleaned = -0.000210659 Jy
! Component: 1750  -  total flux cleaned = -0.00032858 Jy
! Component: 1800  -  total flux cleaned = -0.000270485 Jy
! Component: 1850  -  total flux cleaned = -0.000328327 Jy
! Component: 1900  -  total flux cleaned = -0.000271106 Jy
! Component: 1950  -  total flux cleaned = -0.000498338 Jy
! Component: 2000  -  total flux cleaned = -0.000328838 Jy
! Component: 2050  -  total flux cleaned = -0.000385076 Jy
! Component: 2100  -  total flux cleaned = -0.00016215 Jy
! Component: 2150  -  total flux cleaned = -0.000107288 Jy
! Component: 2200  -  total flux cleaned = -5.32e-05 Jy
! Component: 2250  -  total flux cleaned = 1.16136e-06 Jy
! Component: 2300  -  total flux cleaned = 0.000109514 Jy
! Component: 2350  -  total flux cleaned = 5.58781e-05 Jy
! Component: 2400  -  total flux cleaned = 0.000161944 Jy
! Component: 2450  -  total flux cleaned = 0.000214947 Jy
! Component: 2500  -  total flux cleaned = 0.000267741 Jy
! Component: 2550  -  total flux cleaned = 5.74234e-06 Jy
! Component: 2600  -  total flux cleaned = 0.000213785 Jy
! Component: 2650  -  total flux cleaned = 0.000316659 Jy
! Component: 2700  -  total flux cleaned = 0.000111637 Jy
! Component: 2750  -  total flux cleaned = 1.0015e-05 Jy
! Component: 2800  -  total flux cleaned = 1.04081e-05 Jy
! Component: 2850  -  total flux cleaned = 0.000212422 Jy
! Component: 2900  -  total flux cleaned = 1.24217e-05 Jy
! Component: 2950  -  total flux cleaned = 6.15948e-05 Jy
! Component: 3000  -  total flux cleaned = -0.000136098 Jy
! Component: 3050  -  total flux cleaned = -0.000136209 Jy
! Component: 3100  -  total flux cleaned = 5.93245e-05 Jy
! Component: 3150  -  total flux cleaned = -0.000184213 Jy
! Component: 3200  -  total flux cleaned = -8.71523e-05 Jy
! Component: 3250  -  total flux cleaned = -0.000135358 Jy
! Component: 3300  -  total flux cleaned = -0.000135082 Jy
! Component: 3350  -  total flux cleaned = 7.73895e-06 Jy
! Component: 3400  -  total flux cleaned = -0.000323203 Jy
! Component: 3450  -  total flux cleaned = -0.000229517 Jy
! Component: 3500  -  total flux cleaned = -0.000276346 Jy
! Component: 3550  -  total flux cleaned = -0.000276254 Jy
! Component: 3600  -  total flux cleaned = -0.000230198 Jy
! Component: 3650  -  total flux cleaned = -0.000368088 Jy
! Component: 3700  -  total flux cleaned = -0.000322371 Jy
! Component: 3750  -  total flux cleaned = -0.000549597 Jy
! Component: 3800  -  total flux cleaned = -0.000550053 Jy
! Component: 3850  -  total flux cleaned = -0.000729436 Jy
! Component: 3900  -  total flux cleaned = -0.000818496 Jy
! Component: 3950  -  total flux cleaned = -0.000818362 Jy
! Component: 4000  -  total flux cleaned = -0.000862743 Jy
! Component: 4050  -  total flux cleaned = -0.00103883 Jy
! Total flux subtracted in 4096 components = -0.00108251 Jy
! Clean residual min=-0.002705 max=0.002976 Jy/beam
! Clean residual mean=0.000002 rms=0.000907 Jy/beam
! Combined flux in latest and established models = 0.975423 Jy
keep
! Adding 282 model components to the UV plane model.
! The established model now contains 406 components and 0.975423 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv126_uvs/J2358-1020_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.505 x 15.16 at -14.23 degrees (North through East)
! Clean map  min=-0.0060246  max=0.92013 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv126_uvs/J2358-1020_S_map.fits
wmodel /scr/pima/rv126_uvs/J2358-1020_S_map.mod
! Writing 406 model components to file: /scr/pima/rv126_uvs/J2358-1020_S_map.mod
wobs   /scr/pima/rv126_uvs/J2358-1020_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv126_uvs/J2358-1020_S_uvs.fits
wwins  /scr/pima/rv126_uvs/J2358-1020_S_map.win
! wwins: Wrote 5 windows to /scr/pima/rv126_uvs/J2358-1020_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.920129 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000909126 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.296413 0.296413 0.592826 1.18565 2.3713 4.7426 9.48521 18.9704 37.9408 75.8817
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0027 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.92 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  1012.1 
quit
! Quitting program
! Log file /scr/pima/rv126_uvs/J2358-1020_S_dfm.log closed on Sun Dec 23 07:43:39 2018