! Started logfile: /scr/pima/rv126_uvs/J2332-4118_X_dfm.log on Sun Dec 23 03:23:05 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv126_uvs/J2332-4118_X_uva.fits ! Reading UV FITS file: /scr/pima/rv126_uvs/J2332-4118_X_uva.fits ! AN table 1: 22 integrations on 10 of 10 possible baselines. ! AN table 2: 25 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.776471 visibilities/baseline/integration-bin. ! Found source: J2332-4118 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 1848 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2332-4118_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 2. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 3. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Correcting IF 4. ! A total of 29 telescope corrections were flagged in sub-array 2. ! ! Fit before self-cal, rms=1.005358Jy sigma=14.847275 ! Fit after self-cal, rms=0.660654Jy sigma=9.593952 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8112 mas, bmaj=9.435 mas, bpa=-17.21 degrees ! Estimated noise=2.13929 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.253238 Jy ! Component: 100 - total flux cleaned = 0.326156 Jy ! Total flux subtracted in 100 components = 0.326156 Jy ! Clean residual min=-0.021058 max=0.032961 Jy/beam ! Clean residual mean=0.000198 rms=0.007098 Jy/beam ! Combined flux in latest and established models = 0.326156 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.326156 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103546Jy sigma=1.520529 ! Fit after self-cal, rms=0.103123Jy sigma=1.514125 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.355 mas, bmaj=9.788 mas, bpa=-15.88 degrees ! Estimated noise=1.12998 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0551794 Jy ! Component: 100 - total flux cleaned = 0.083246 Jy ! Component: 150 - total flux cleaned = 0.100188 Jy ! Component: 200 - total flux cleaned = 0.110865 Jy ! Total flux subtracted in 200 components = 0.110865 Jy ! Clean residual min=-0.014440 max=0.018468 Jy/beam ! Clean residual mean=0.000101 rms=0.004080 Jy/beam ! Combined flux in latest and established models = 0.437021 Jy ! Performing phase self-cal ! Adding 53 model components to the UV plane model. ! The established model now contains 66 components and 0.437021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.070062Jy sigma=0.995975 ! Fit after self-cal, rms=0.069460Jy sigma=0.987270 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.355 x 9.788 at -15.88 degrees (North through East) ! Clean map min=-0.012472 max=0.28147 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 KP 1.06 LA 0.97 NL 1.14 ! OV 0.92 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.97 KP 1.06 LA 0.99 MK 1.03 ! OV 1.04 PT 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 KP 1.05 LA 0.96 NL 1.18 ! OV 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 KP 1.06 LA 1.01 MK 1.00 ! OV 1.02 PT 0.89 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.95 KP 1.05 LA 0.95 NL 1.19 ! OV 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 KP 1.10 LA 0.99 MK 1.02 ! OV 1.02 PT 0.92 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.92 KP 1.06 LA 0.98 NL 1.17 ! OV 0.93 ! ! Telescope amplitude corrections in sub-array 2: ! FD 0.96 KP 1.07 LA 1.02 MK 0.99 ! OV 1.03 PT 0.89 ! ! ! Fit before self-cal, rms=0.069460Jy sigma=0.987270 ! Fit after self-cal, rms=0.065129Jy sigma=0.889435 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.361 mas, bmaj=9.799 mas, bpa=-15.86 degrees ! Estimated noise=1.12455 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00207901 Jy ! Component: 100 - total flux cleaned = 0.00159624 Jy ! Component: 150 - total flux cleaned = 0.00133197 Jy ! Component: 200 - total flux cleaned = 0.00121653 Jy ! Total flux subtracted in 200 components = 0.00121653 Jy ! Clean residual min=-0.006675 max=0.005330 Jy/beam ! Clean residual mean=-0.000004 rms=0.001628 Jy/beam ! Combined flux in latest and established models = 0.438238 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 78 components and 0.438238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064158Jy sigma=0.880421 ! Fit after self-cal, rms=0.064174Jy sigma=0.879286 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064174Jy sigma=0.879286 ! Fit after self-cal, rms=0.064621Jy sigma=0.878765 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.361 mas, bmaj=9.779 mas, bpa=-15.87 degrees ! Estimated noise=1.12505 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000549346 Jy ! Component: 100 - total flux cleaned = -0.000984925 Jy ! Component: 150 - total flux cleaned = -0.00116442 Jy ! Component: 200 - total flux cleaned = -0.0014116 Jy ! Total flux subtracted in 200 components = -0.0014116 Jy ! Clean residual min=-0.005931 max=0.004807 Jy/beam ! Clean residual mean=-0.000004 rms=0.001477 Jy/beam ! Combined flux in latest and established models = 0.436826 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 84 components and 0.436826 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064183Jy sigma=0.875047 ! Fit after self-cal, rms=0.064174Jy sigma=0.874752 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00046353 Jy ! Component: 100 - total flux cleaned = -0.000755303 Jy ! Component: 150 - total flux cleaned = -0.000952722 Jy ! Component: 200 - total flux cleaned = -0.0012541 Jy ! Total flux subtracted in 200 components = -0.0012541 Jy ! Clean residual min=-0.005422 max=0.004706 Jy/beam ! Clean residual mean=-0.000002 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.435572 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 92 components and 0.435572 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063989Jy sigma=0.872978 ! Fit after self-cal, rms=0.063985Jy sigma=0.872831 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063985Jy sigma=0.872831 ! Fit after self-cal, rms=0.064442Jy sigma=0.872103 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.363 mas, bmaj=9.759 mas, bpa=-15.86 degrees ! Estimated noise=1.12617 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00159729 Jy ! Component: 100 - total flux cleaned = -0.00173959 Jy ! Component: 150 - total flux cleaned = -0.00186466 Jy ! Component: 200 - total flux cleaned = -0.00203546 Jy ! Total flux subtracted in 200 components = -0.00203546 Jy ! Clean residual min=-0.004943 max=0.004381 Jy/beam ! Clean residual mean=-0.000001 rms=0.001281 Jy/beam ! Combined flux in latest and established models = 0.433537 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 106 components and 0.433537 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064244Jy sigma=0.870293 ! Fit after self-cal, rms=0.064242Jy sigma=0.870197 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000104658 Jy ! Component: 100 - total flux cleaned = -0.000206317 Jy ! Component: 150 - total flux cleaned = -0.000351934 Jy ! Component: 200 - total flux cleaned = -0.000582078 Jy ! Total flux subtracted in 200 components = -0.000582078 Jy ! Clean residual min=-0.004682 max=0.004252 Jy/beam ! Clean residual mean=0.000000 rms=0.001237 Jy/beam ! Combined flux in latest and established models = 0.432955 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 115 components and 0.432955 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064149Jy sigma=0.869296 ! Fit after self-cal, rms=0.064146Jy sigma=0.869242 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064146Jy sigma=0.869242 ! Fit after self-cal, rms=0.064542Jy sigma=0.868685 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.881 mas, bmaj=14.45 mas, bpa=-4.901 degrees ! Estimated noise=1.19762 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00194603 Jy ! Component: 100 - total flux cleaned = -0.00230842 Jy ! Component: 150 - total flux cleaned = -0.00235157 Jy ! Component: 200 - total flux cleaned = -0.00247262 Jy ! Total flux subtracted in 200 components = -0.00247262 Jy ! Clean residual min=-0.004268 max=0.003970 Jy/beam ! Clean residual mean=0.000003 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.430482 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 124 components and 0.430482 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064450Jy sigma=0.867720 ! Fit after self-cal, rms=0.064451Jy sigma=0.867599 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000206545 Jy ! Component: 100 - total flux cleaned = -0.000241804 Jy ! Component: 150 - total flux cleaned = -0.000376154 Jy ! Component: 200 - total flux cleaned = -0.000473086 Jy ! Total flux subtracted in 200 components = -0.000473086 Jy ! Clean residual min=-0.004139 max=0.003892 Jy/beam ! Clean residual mean=0.000004 rms=0.001187 Jy/beam ! Combined flux in latest and established models = 0.430009 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 126 components and 0.430009 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064403Jy sigma=0.867368 ! Fit after self-cal, rms=0.064402Jy sigma=0.867322 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.364 mas, bmaj=9.742 mas, bpa=-15.86 degrees ! Estimated noise=1.12707 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.364 x 9.742 at -15.86 degrees (North through East) ! Clean map min=-0.0048693 max=0.28325 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8071 mas, bmaj=9.383 mas, bpa=-17.21 degrees ! Estimated noise=2.15249 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.253514 Jy ! Component: 100 - total flux cleaned = 0.322123 Jy ! Component: 150 - total flux cleaned = 0.359609 Jy ! Component: 200 - total flux cleaned = 0.38325 Jy ! Total flux subtracted in 200 components = 0.38325 Jy ! Clean residual min=-0.010074 max=0.013134 Jy/beam ! Clean residual mean=0.000067 rms=0.003246 Jy/beam ! Combined flux in latest and established models = 0.38325 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 32 model components to the UV plane model. ! The established model now contains 32 components and 0.38325 Jy ! Inverting map and beam ! Estimated beam: bmin=1.364 mas, bmaj=9.742 mas, bpa=-15.86 degrees ! Estimated noise=1.12707 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0224693 Jy ! Component: 100 - total flux cleaned = 0.0348036 Jy ! Component: 150 - total flux cleaned = 0.0421959 Jy ! Component: 200 - total flux cleaned = 0.0469611 Jy ! Total flux subtracted in 200 components = 0.0469611 Jy ! Clean residual min=-0.005395 max=0.005309 Jy/beam ! Clean residual mean=0.000000 rms=0.001579 Jy/beam ! Combined flux in latest and established models = 0.430211 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 78 components and 0.430211 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.881 mas, bmaj=14.45 mas, bpa=-4.901 degrees ! Estimated noise=1.19762 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00345141 Jy ! Component: 100 - total flux cleaned = 0.00373599 Jy ! Component: 150 - total flux cleaned = 0.00358425 Jy ! Component: 200 - total flux cleaned = 0.00344051 Jy ! Total flux subtracted in 200 components = 0.00344051 Jy ! Clean residual min=-0.004912 max=0.004647 Jy/beam ! Clean residual mean=-0.000008 rms=0.001555 Jy/beam ! Combined flux in latest and established models = 0.433652 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000134442 Jy ! Component: 100 - total flux cleaned = -0.000317207 Jy ! Component: 150 - total flux cleaned = -0.000551689 Jy ! Component: 200 - total flux cleaned = -0.000778559 Jy ! Total flux subtracted in 200 components = -0.000778559 Jy ! Clean residual min=-0.004637 max=0.004608 Jy/beam ! Clean residual mean=-0.000005 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 0.432873 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 106 components and 0.432873 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.364 mas, bmaj=9.742 mas, bpa=-15.86 degrees ! Estimated noise=1.12707 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.01167e-05 Jy ! Component: 100 - total flux cleaned = -0.000250932 Jy ! Component: 150 - total flux cleaned = -0.00024996 Jy ! Component: 200 - total flux cleaned = -0.000361011 Jy ! Total flux subtracted in 200 components = -0.000361011 Jy ! Clean residual min=-0.004388 max=0.004412 Jy/beam ! Clean residual mean=-0.000003 rms=0.001277 Jy/beam ! Combined flux in latest and established models = 0.432512 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 122 components and 0.432512 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064531Jy sigma=0.870373 ! Fit after self-cal, rms=0.064516Jy sigma=0.869997 wmodel J2332-4118_X_map.mod ! Writing 122 model components to file: J2332-4118_X_map.mod wobs J2332-4118_X_uvs.fits ! Writing UV FITS file: J2332-4118_X_uvs.fits wwins J2332-4118_X_map.win ! wwins: Wrote 1 windows to J2332-4118_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149285 Jy ! Component: 100 - total flux cleaned = -0.00192897 Jy ! Component: 150 - total flux cleaned = -0.00219106 Jy ! Component: 200 - total flux cleaned = -0.00219329 Jy ! Component: 250 - total flux cleaned = -0.00213605 Jy ! Component: 300 - total flux cleaned = -0.00208181 Jy ! Component: 350 - total flux cleaned = -0.00228077 Jy ! Component: 400 - total flux cleaned = -0.00251665 Jy ! Component: 450 - total flux cleaned = -0.0026962 Jy ! Component: 500 - total flux cleaned = -0.002827 Jy ! Component: 550 - total flux cleaned = -0.0029935 Jy ! Component: 600 - total flux cleaned = -0.00303373 Jy ! Component: 650 - total flux cleaned = -0.00307332 Jy ! Component: 700 - total flux cleaned = -0.00300038 Jy ! Component: 750 - total flux cleaned = -0.00303763 Jy ! Component: 800 - total flux cleaned = -0.00286403 Jy ! Component: 850 - total flux cleaned = -0.00283182 Jy ! Component: 900 - total flux cleaned = -0.00273248 Jy ! Component: 950 - total flux cleaned = -0.00257182 Jy ! Component: 1000 - total flux cleaned = -0.00250908 Jy ! Component: 1050 - total flux cleaned = -0.00235644 Jy ! Component: 1100 - total flux cleaned = -0.00226694 Jy ! Component: 1150 - total flux cleaned = -0.00220907 Jy ! Component: 1200 - total flux cleaned = -0.00212242 Jy ! Component: 1250 - total flux cleaned = -0.00200926 Jy ! Component: 1300 - total flux cleaned = -0.00189825 Jy ! Component: 1350 - total flux cleaned = -0.00178939 Jy ! Component: 1400 - total flux cleaned = -0.00160298 Jy ! Component: 1450 - total flux cleaned = -0.00144711 Jy ! Component: 1500 - total flux cleaned = -0.00137078 Jy ! Component: 1550 - total flux cleaned = -0.00124453 Jy ! Component: 1600 - total flux cleaned = -0.0011208 Jy ! Component: 1650 - total flux cleaned = -0.00107195 Jy ! Component: 1700 - total flux cleaned = -0.00107176 Jy ! Component: 1750 - total flux cleaned = -0.000953939 Jy ! Component: 1800 - total flux cleaned = -0.000930781 Jy ! Component: 1850 - total flux cleaned = -0.000839709 Jy ! Component: 1900 - total flux cleaned = -0.000772002 Jy ! Component: 1950 - total flux cleaned = -0.000750247 Jy ! Component: 2000 - total flux cleaned = -0.000663067 Jy ! Component: 2050 - total flux cleaned = -0.000598652 Jy ! Component: 2100 - total flux cleaned = -0.000641632 Jy ! Component: 2150 - total flux cleaned = -0.00064173 Jy ! Component: 2200 - total flux cleaned = -0.000662581 Jy ! Component: 2250 - total flux cleaned = -0.000621056 Jy ! Component: 2300 - total flux cleaned = -0.000559496 Jy ! Component: 2350 - total flux cleaned = -0.000498727 Jy ! Component: 2400 - total flux cleaned = -0.000398688 Jy ! Component: 2450 - total flux cleaned = -0.000379068 Jy ! Component: 2500 - total flux cleaned = -0.000359518 Jy ! Component: 2550 - total flux cleaned = -0.000262539 Jy ! Component: 2600 - total flux cleaned = -0.000224446 Jy ! Component: 2650 - total flux cleaned = -0.00022466 Jy ! Component: 2700 - total flux cleaned = -0.000149229 Jy ! Component: 2750 - total flux cleaned = -0.000149207 Jy ! Component: 2800 - total flux cleaned = -5.62426e-05 Jy ! Component: 2850 - total flux cleaned = -3.79285e-05 Jy ! Component: 2900 - total flux cleaned = -1.368e-06 Jy ! Component: 2950 - total flux cleaned = 8.93178e-05 Jy ! Component: 3000 - total flux cleaned = 0.000143318 Jy ! Component: 3050 - total flux cleaned = 7.16196e-05 Jy ! Component: 3100 - total flux cleaned = 5.40172e-05 Jy ! Component: 3150 - total flux cleaned = 0.000142824 Jy ! Component: 3200 - total flux cleaned = 3.65103e-05 Jy ! Component: 3250 - total flux cleaned = 5.41936e-05 Jy ! Component: 3300 - total flux cleaned = 5.42571e-05 Jy ! Component: 3350 - total flux cleaned = 7.17969e-05 Jy ! Component: 3400 - total flux cleaned = 7.17945e-05 Jy ! Component: 3450 - total flux cleaned = 3.68553e-05 Jy ! Component: 3500 - total flux cleaned = 5.43424e-05 Jy ! Component: 3550 - total flux cleaned = 5.42805e-05 Jy ! Component: 3600 - total flux cleaned = 8.91495e-05 Jy ! Component: 3650 - total flux cleaned = 5.43506e-05 Jy ! Component: 3700 - total flux cleaned = 8.91684e-05 Jy ! Component: 3750 - total flux cleaned = 5.43324e-05 Jy ! Component: 3800 - total flux cleaned = 5.42995e-05 Jy ! Component: 3850 - total flux cleaned = 7.18172e-05 Jy ! Component: 3900 - total flux cleaned = 0.000106723 Jy ! Component: 3950 - total flux cleaned = 0.000141705 Jy ! Component: 4000 - total flux cleaned = 0.000141712 Jy ! Component: 4050 - total flux cleaned = 8.91944e-05 Jy ! Total flux subtracted in 4096 components = 1.88475e-05 Jy ! Clean residual min=-0.000977 max=0.001003 Jy/beam ! Clean residual mean=0.000001 rms=0.000321 Jy/beam ! Combined flux in latest and established models = 0.432531 Jy keep ! Adding 245 model components to the UV plane model. ! The established model now contains 367 components and 0.432531 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv126_uvs/J2332-4118_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.364 x 9.742 at -15.86 degrees (North through East) ! Clean map min=-0.0025268 max=0.30271 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv126_uvs/J2332-4118_X_map.fits wmodel /scr/pima/rv126_uvs/J2332-4118_X_map.mod ! Writing 367 model components to file: /scr/pima/rv126_uvs/J2332-4118_X_map.mod wobs /scr/pima/rv126_uvs/J2332-4118_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv126_uvs/J2332-4118_X_uvs.fits wwins /scr/pima/rv126_uvs/J2332-4118_X_map.win ! wwins: Wrote 2 windows to /scr/pima/rv126_uvs/J2332-4118_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.302707 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000317602 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.314762 0.314762 0.629524 1.25905 2.5181 5.03619 10.0724 20.1448 40.2895 80.5791 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0009 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.302 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 953.1 quit ! Quitting program ! Log file /scr/pima/rv126_uvs/J2332-4118_X_dfm.log closed on Sun Dec 23 03:23:09 2018