! Started logfile: /scr/pima/rv126_uvs/J1806+6949_X_dfm.log on Sun Dec 23 03:21:44 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv126_uvs/J1806+6949_X_uva.fits ! Reading UV FITS file: /scr/pima/rv126_uvs/J1806+6949_X_uva.fits ! AN table 1: 7 integrations on 55 of 55 possible baselines. ! AN table 2: 5 integrations on 15 of 15 possible baselines. ! AN table 3: 76 integrations on 45 of 45 possible baselines. ! AN table 4: 18 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.376867 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1806+6949 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 6256 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1806+6949_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 43 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 415 telescope corrections were flagged in sub-array 3. ! A total of 72 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 43 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 415 telescope corrections were flagged in sub-array 3. ! A total of 72 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 43 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 415 telescope corrections were flagged in sub-array 3. ! A total of 72 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 43 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 415 telescope corrections were flagged in sub-array 3. ! A total of 72 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=1.260391Jy sigma=19.279794 ! Fit after self-cal, rms=0.383216Jy sigma=5.884695 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7953 mas, bmaj=0.9669 mas, bpa=15.48 degrees ! Estimated noise=0.914131 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.503282 Jy ! Component: 100 - total flux cleaned = 0.677431 Jy ! Total flux subtracted in 100 components = 0.677431 Jy ! Clean residual min=-0.019234 max=0.108195 Jy/beam ! Clean residual mean=0.000173 rms=0.005015 Jy/beam ! Combined flux in latest and established models = 0.677431 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.677431 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.228223Jy sigma=3.354074 ! Fit after self-cal, rms=0.227643Jy sigma=3.346803 ! Inverting map ! Added new window around map position (-1, -0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.100672 Jy ! Component: 100 - total flux cleaned = 0.150728 Jy ! Total flux subtracted in 100 components = 0.150728 Jy ! Clean residual min=-0.014112 max=0.054322 Jy/beam ! Clean residual mean=0.000089 rms=0.003333 Jy/beam ! Combined flux in latest and established models = 0.828159 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 20 components and 0.828159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153867Jy sigma=2.251559 ! Fit after self-cal, rms=0.149962Jy sigma=2.184200 ! Inverting map ! Added new window around map position (-2.4, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0476271 Jy ! Component: 100 - total flux cleaned = 0.0752333 Jy ! Total flux subtracted in 100 components = 0.0752333 Jy ! Clean residual min=-0.011926 max=0.031679 Jy/beam ! Clean residual mean=0.000045 rms=0.002564 Jy/beam ! Combined flux in latest and established models = 0.903393 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 30 components and 0.903393 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124369Jy sigma=1.791054 ! Fit after self-cal, rms=0.122252Jy sigma=1.754521 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0253145 Jy ! Component: 100 - total flux cleaned = 0.0413572 Jy ! Total flux subtracted in 100 components = 0.0413572 Jy ! Clean residual min=-0.011454 max=0.020817 Jy/beam ! Clean residual mean=0.000021 rms=0.002264 Jy/beam ! Combined flux in latest and established models = 0.94475 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 38 components and 0.94475 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112777Jy sigma=1.611168 ! Fit after self-cal, rms=0.112044Jy sigma=1.598429 ! Inverting map ! Added new window around map position (-3.6, -0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178792 Jy ! Component: 100 - total flux cleaned = 0.0297695 Jy ! Total flux subtracted in 100 components = 0.0297695 Jy ! Clean residual min=-0.010720 max=0.015348 Jy/beam ! Clean residual mean=0.000004 rms=0.002120 Jy/beam ! Combined flux in latest and established models = 0.974519 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 49 components and 0.974519 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107092Jy sigma=1.524144 ! Fit after self-cal, rms=0.106722Jy sigma=1.518081 ! Inverting map ! Added new window around map position (0.2, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0138106 Jy ! Component: 100 - total flux cleaned = 0.0185164 Jy ! Total flux subtracted in 100 components = 0.0185164 Jy ! Clean residual min=-0.010677 max=0.012291 Jy/beam ! Clean residual mean=-0.000007 rms=0.002030 Jy/beam ! Combined flux in latest and established models = 0.993036 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 58 components and 0.993035 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104457Jy sigma=1.484062 ! Fit after self-cal, rms=0.104321Jy sigma=1.481820 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.002 mas, bmaj=1.175 mas, bpa=18.9 degrees ! Estimated noise=0.672741 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-5, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0156908 Jy ! Component: 100 - total flux cleaned = 0.025432 Jy ! Component: 150 - total flux cleaned = 0.0323458 Jy ! Component: 200 - total flux cleaned = 0.0357873 Jy ! Total flux subtracted in 200 components = 0.0357873 Jy ! Clean residual min=-0.011497 max=0.009073 Jy/beam ! Clean residual mean=-0.001180 rms=0.002290 Jy/beam ! Combined flux in latest and established models = 1.02882 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 78 components and 1.02882 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101508Jy sigma=1.437883 ! Fit after self-cal, rms=0.101217Jy sigma=1.433163 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.002 x 1.175 at 18.9 degrees (North through East) ! Clean map min=-0.010921 max=0.62793 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.97 HN 0.93 KP 1.09 ! LA 1.00 NL 1.06 NY 0.91 OV 0.99 ! PT 0.89 WN 1.57 WZ 0.82 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.01 MK 0.96 NY 0.80 OV 1.04 ! WN 1.48 WZ 0.79 ! ! A total of 18 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 HN 1.06 KP 1.10 ! LA 1.03 MK 0.99 NL 1.06 NY 0.85 ! OV 0.98 PT 0.91 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 HN 0.97 MK 1.08 NY 0.89 ! WN 1.41 WZ 0.83 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.95 FD 0.97 HN 0.90 KP 1.08 ! LA 1.03 NL 1.08 NY 0.99 OV 1.00 ! PT 0.89 WN 1.52 WZ 0.80 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 MK 0.99 NY 0.96 OV 0.94 ! WN 1.53 WZ 0.79 ! ! A total of 18 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 HN 1.05 KP 1.09 ! LA 1.03 MK 0.99 NL 1.06 NY 0.96 ! OV 0.98 PT 0.91 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 HN 0.98 MK 1.05 NY 0.89 ! WN 1.45 WZ 0.84 ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.00 FD 0.98 HN 0.95 KP 1.09 ! LA 1.00 NL 1.04 NY 0.97 OV 1.00 ! PT 0.90 WN 1.49 WZ 0.82 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 MK 0.99 NY 0.99 OV 1.02 ! WN 1.45 WZ 0.84 ! ! A total of 18 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 HN 1.06 KP 1.10 ! LA 1.04 MK 1.00 NL 1.05 NY 0.95 ! OV 0.99 PT 0.91 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 HN 0.94 MK 1.27 NY 0.90 ! WN 1.37 WZ 0.88 ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 1.01 HN 0.94 KP 1.08 ! LA 1.01 NL 1.06 NY 1.02 OV 0.99 ! PT 0.88 WN 1.44 WZ 0.87 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 MK 0.99 NY 0.87 OV 1.00 ! WN 1.33 WZ 0.97 ! ! A total of 18 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.95 HN 1.06 KP 1.10 ! LA 1.04 MK 1.00 NL 1.04 NY 1.00 ! OV 0.98 PT 0.90 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.04 HN 0.89 MK 1.19 NY 0.98 ! WN 1.26 WZ 0.93 ! ! ! Fit before self-cal, rms=0.101217Jy sigma=1.433163 ! Fit after self-cal, rms=0.072648Jy sigma=1.015687 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.048 mas, bmaj=1.183 mas, bpa=21.78 degrees ! Estimated noise=0.687299 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000564252 Jy ! Component: 100 - total flux cleaned = -0.000252296 Jy ! Component: 150 - total flux cleaned = 0.000308543 Jy ! Component: 200 - total flux cleaned = 0.000424676 Jy ! Total flux subtracted in 200 components = 0.000424676 Jy ! Clean residual min=-0.005995 max=0.005263 Jy/beam ! Clean residual mean=0.000099 rms=0.001172 Jy/beam ! Combined flux in latest and established models = 1.02925 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 88 components and 1.02925 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072011Jy sigma=1.005879 ! Fit after self-cal, rms=0.071970Jy sigma=1.004483 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.071970Jy sigma=1.004483 ! Fit after self-cal, rms=0.066171Jy sigma=0.900639 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.047 mas, bmaj=1.188 mas, bpa=22.27 degrees ! Estimated noise=0.688401 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00079986 Jy ! Component: 100 - total flux cleaned = 0.000539128 Jy ! Component: 150 - total flux cleaned = 0.000314838 Jy ! Component: 200 - total flux cleaned = 0.000311917 Jy ! Total flux subtracted in 200 components = 0.000311917 Jy ! Clean residual min=-0.003469 max=0.005285 Jy/beam ! Clean residual mean=0.000098 rms=0.000778 Jy/beam ! Combined flux in latest and established models = 1.02956 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 98 components and 1.02956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065700Jy sigma=0.893234 ! Fit after self-cal, rms=0.065633Jy sigma=0.892157 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13.6, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00509093 Jy ! Component: 100 - total flux cleaned = 0.00679148 Jy ! Component: 150 - total flux cleaned = 0.00813176 Jy ! Component: 200 - total flux cleaned = 0.0086833 Jy ! Total flux subtracted in 200 components = 0.0086833 Jy ! Clean residual min=-0.003201 max=0.003956 Jy/beam ! Clean residual mean=0.000073 rms=0.000717 Jy/beam ! Combined flux in latest and established models = 1.03824 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 111 components and 1.03824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065013Jy sigma=0.882659 ! Fit after self-cal, rms=0.064921Jy sigma=0.881436 ! Inverting map ! Added new window around map position (-8.2, -0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00250892 Jy ! Component: 100 - total flux cleaned = 0.00379454 Jy ! Component: 150 - total flux cleaned = 0.00471549 Jy ! Component: 200 - total flux cleaned = 0.00512422 Jy ! Total flux subtracted in 200 components = 0.00512422 Jy ! Clean residual min=-0.002877 max=0.003124 Jy/beam ! Clean residual mean=0.000055 rms=0.000689 Jy/beam ! Combined flux in latest and established models = 1.04337 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 120 components and 1.04337 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064493Jy sigma=0.875762 ! Fit after self-cal, rms=0.064423Jy sigma=0.874778 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064423Jy sigma=0.874778 ! Fit after self-cal, rms=0.063970Jy sigma=0.865231 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.047 mas, bmaj=1.187 mas, bpa=21.87 degrees ! Estimated noise=0.687966 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00102288 Jy ! Component: 100 - total flux cleaned = 0.00183334 Jy ! Component: 150 - total flux cleaned = 0.00225794 Jy ! Component: 200 - total flux cleaned = 0.00257357 Jy ! Total flux subtracted in 200 components = 0.00257357 Jy ! Clean residual min=-0.002627 max=0.002854 Jy/beam ! Clean residual mean=0.000075 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 1.04594 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 126 components and 1.04594 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063665Jy sigma=0.861040 ! Fit after self-cal, rms=0.063614Jy sigma=0.860334 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000192263 Jy ! Component: 100 - total flux cleaned = 0.000595476 Jy ! Component: 150 - total flux cleaned = 0.000877657 Jy ! Component: 200 - total flux cleaned = 0.00107435 Jy ! Total flux subtracted in 200 components = 0.00107435 Jy ! Clean residual min=-0.002502 max=0.002767 Jy/beam ! Clean residual mean=0.000072 rms=0.000622 Jy/beam ! Combined flux in latest and established models = 1.04702 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 130 components and 1.04702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063397Jy sigma=0.857336 ! Fit after self-cal, rms=0.063348Jy sigma=0.856700 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063348Jy sigma=0.856700 ! Fit after self-cal, rms=0.063309Jy sigma=0.856394 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.661 mas, bmaj=3.244 mas, bpa=-3.088 degrees ! Estimated noise=0.856131 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00147148 Jy ! Component: 100 - total flux cleaned = 0.00226534 Jy ! Component: 150 - total flux cleaned = 0.00261445 Jy ! Component: 200 - total flux cleaned = 0.00287295 Jy ! Total flux subtracted in 200 components = 0.00287295 Jy ! Clean residual min=-0.001933 max=0.002549 Jy/beam ! Clean residual mean=0.000149 rms=0.000630 Jy/beam ! Combined flux in latest and established models = 1.04989 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 139 components and 1.04989 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063243Jy sigma=0.855223 ! Fit after self-cal, rms=0.063222Jy sigma=0.854989 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.53639e-05 Jy ! Component: 100 - total flux cleaned = 0.000522072 Jy ! Component: 150 - total flux cleaned = 0.000751867 Jy ! Component: 200 - total flux cleaned = 0.000919811 Jy ! Total flux subtracted in 200 components = 0.000919811 Jy ! Clean residual min=-0.001914 max=0.002473 Jy/beam ! Clean residual mean=0.000144 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 1.05081 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 142 components and 1.05081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063167Jy sigma=0.854014 ! Fit after self-cal, rms=0.063146Jy sigma=0.853780 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.047 mas, bmaj=1.186 mas, bpa=21.64 degrees ! Estimated noise=0.687882 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.047 x 1.186 at 21.64 degrees (North through East) ! Clean map min=-0.0022232 max=0.63602 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063146Jy sigma=0.853780 ! Fit after self-cal, rms=0.059858Jy sigma=0.797155 ! Inverting map and beam ! Estimated beam: bmin=1.047 mas, bmaj=1.186 mas, bpa=21.68 degrees ! Estimated noise=0.687858 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000305321 Jy ! Component: 100 - total flux cleaned = 0.000383737 Jy ! Component: 150 - total flux cleaned = 0.000191109 Jy ! Component: 200 - total flux cleaned = 7.0786e-05 Jy ! Total flux subtracted in 200 components = 7.0786e-05 Jy ! Clean residual min=-0.002359 max=0.002653 Jy/beam ! Clean residual mean=0.000078 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 1.05088 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 152 components and 1.05088 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059663Jy sigma=0.794487 ! Fit after self-cal, rms=0.059621Jy sigma=0.793948 ! Inverting map ! Added new window around map position (11.6, -39.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000952431 Jy ! Component: 100 - total flux cleaned = 0.00160491 Jy ! Component: 150 - total flux cleaned = 0.00191174 Jy ! Component: 200 - total flux cleaned = 0.00185816 Jy ! Total flux subtracted in 200 components = 0.00185816 Jy ! Clean residual min=-0.002313 max=0.002600 Jy/beam ! Clean residual mean=0.000073 rms=0.000582 Jy/beam ! Combined flux in latest and established models = 1.05274 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 160 components and 1.05274 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059423Jy sigma=0.791105 ! Fit after self-cal, rms=0.059384Jy sigma=0.790560 ! Inverting map ! Added new window around map position (1.6, -48). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000937271 Jy ! Component: 100 - total flux cleaned = 0.00155582 Jy ! Component: 150 - total flux cleaned = 0.00205964 Jy ! Component: 200 - total flux cleaned = 0.00216276 Jy ! Total flux subtracted in 200 components = 0.00216276 Jy ! Clean residual min=-0.002292 max=0.002542 Jy/beam ! Clean residual mean=0.000066 rms=0.000572 Jy/beam ! Combined flux in latest and established models = 1.0549 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 170 components and 1.0549 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.059197Jy sigma=0.788164 ! Fit after self-cal, rms=0.059167Jy sigma=0.787711 ! Inverting map ! Added new window around map position (-22.4, 42.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130673 Jy ! Component: 100 - total flux cleaned = 0.00198619 Jy ! Component: 150 - total flux cleaned = 0.00244243 Jy ! Component: 200 - total flux cleaned = 0.0025989 Jy ! Total flux subtracted in 200 components = 0.0025989 Jy ! Clean residual min=-0.002216 max=0.002447 Jy/beam ! Clean residual mean=0.000059 rms=0.000557 Jy/beam ! Combined flux in latest and established models = 1.0575 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 184 components and 1.0575 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058991Jy sigma=0.785303 ! Fit after self-cal, rms=0.058967Jy sigma=0.784972 ! Inverting map ! Added new window around map position (34.4, 39.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00115343 Jy ! Component: 100 - total flux cleaned = 0.00175828 Jy ! Component: 150 - total flux cleaned = 0.00217504 Jy ! Component: 200 - total flux cleaned = 0.00227299 Jy ! Total flux subtracted in 200 components = 0.00227299 Jy ! Clean residual min=-0.002247 max=0.002247 Jy/beam ! Clean residual mean=0.000051 rms=0.000549 Jy/beam ! Combined flux in latest and established models = 1.05977 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 193 components and 1.05977 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058831Jy sigma=0.782819 ! Fit after self-cal, rms=0.058811Jy sigma=0.782553 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058811Jy sigma=0.782553 ! Fit after self-cal, rms=0.058762Jy sigma=0.781870 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8269 mas, bmaj=0.9717 mas, bpa=23.78 degrees ! Estimated noise=0.937109 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.515263 Jy ! Component: 100 - total flux cleaned = 0.705594 Jy ! Component: 150 - total flux cleaned = 0.799905 Jy ! Component: 200 - total flux cleaned = 0.856101 Jy ! Total flux subtracted in 200 components = 0.856101 Jy ! Clean residual min=-0.007377 max=0.030348 Jy/beam ! Clean residual mean=0.000112 rms=0.002095 Jy/beam ! Combined flux in latest and established models = 0.856102 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.856102 Jy ! Inverting map and beam ! Estimated beam: bmin=1.047 mas, bmaj=1.186 mas, bpa=21.41 degrees ! Estimated noise=0.687812 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0567452 Jy ! Component: 100 - total flux cleaned = 0.090486 Jy ! Component: 150 - total flux cleaned = 0.112781 Jy ! Component: 200 - total flux cleaned = 0.128539 Jy ! Total flux subtracted in 200 components = 0.128539 Jy ! Clean residual min=-0.003771 max=0.010016 Jy/beam ! Clean residual mean=0.000358 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.984641 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 67 components and 0.984641 Jy ! Inverting map ! Added new window around map position (1, 0.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0120114 Jy ! Component: 100 - total flux cleaned = 0.0211564 Jy ! Component: 150 - total flux cleaned = 0.0284644 Jy ! Component: 200 - total flux cleaned = 0.0345319 Jy ! Total flux subtracted in 200 components = 0.0345319 Jy ! Clean residual min=-0.002798 max=0.003968 Jy/beam ! Clean residual mean=0.000216 rms=0.000728 Jy/beam ! Combined flux in latest and established models = 1.01917 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 97 components and 1.01917 Jy ! Inverting map ! Added new window around map position (-3, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00518948 Jy ! Component: 100 - total flux cleaned = 0.0097216 Jy ! Component: 150 - total flux cleaned = 0.0137656 Jy ! Component: 200 - total flux cleaned = 0.0174095 Jy ! Total flux subtracted in 200 components = 0.0174095 Jy ! Clean residual min=-0.002409 max=0.002827 Jy/beam ! Clean residual mean=0.000152 rms=0.000617 Jy/beam ! Combined flux in latest and established models = 1.03658 Jy ! Adding 50 model components to the UV plane model. ! The established model now contains 119 components and 1.03658 Jy ! Inverting map ! Added new window around map position (-1.8, -9.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00339851 Jy ! Component: 100 - total flux cleaned = 0.00642805 Jy ! Component: 150 - total flux cleaned = 0.00918198 Jy ! Component: 200 - total flux cleaned = 0.0116883 Jy ! Total flux subtracted in 200 components = 0.0116883 Jy ! Clean residual min=-0.002201 max=0.002614 Jy/beam ! Clean residual mean=0.000111 rms=0.000571 Jy/beam ! Combined flux in latest and established models = 1.04827 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 135 components and 1.04827 Jy ! Inverting map ! Added new window around map position (-34, -25.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00249997 Jy ! Component: 100 - total flux cleaned = 0.00423255 Jy ! Component: 150 - total flux cleaned = 0.00584318 Jy ! Component: 200 - total flux cleaned = 0.0073432 Jy ! Total flux subtracted in 200 components = 0.0073432 Jy ! Clean residual min=-0.002171 max=0.002331 Jy/beam ! Clean residual mean=0.000086 rms=0.000550 Jy/beam ! Combined flux in latest and established models = 1.05561 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 150 components and 1.05561 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.66 mas, bmaj=3.244 mas, bpa=-3.134 degrees ! Estimated noise=0.856343 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0022097 Jy ! Component: 100 - total flux cleaned = 0.00375114 Jy ! Component: 150 - total flux cleaned = 0.00501452 Jy ! Component: 200 - total flux cleaned = 0.00610829 Jy ! Total flux subtracted in 200 components = 0.00610829 Jy ! Clean residual min=-0.001883 max=0.002188 Jy/beam ! Clean residual mean=0.000129 rms=0.000560 Jy/beam ! Combined flux in latest and established models = 1.06172 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000736997 Jy ! Component: 100 - total flux cleaned = 0.00143301 Jy ! Component: 150 - total flux cleaned = 0.00202837 Jy ! Component: 200 - total flux cleaned = 0.00251169 Jy ! Total flux subtracted in 200 components = 0.00251169 Jy ! Clean residual min=-0.001937 max=0.002154 Jy/beam ! Clean residual mean=0.000112 rms=0.000554 Jy/beam ! Combined flux in latest and established models = 1.06423 Jy ! Adding 56 model components to the UV plane model. ! The established model now contains 195 components and 1.06423 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.047 mas, bmaj=1.186 mas, bpa=21.41 degrees ! Estimated noise=0.687812 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000778303 Jy ! Component: 100 - total flux cleaned = -0.00078051 Jy ! Component: 150 - total flux cleaned = -0.000665885 Jy ! Component: 200 - total flux cleaned = -0.000666306 Jy ! Total flux subtracted in 200 components = -0.000666306 Jy ! Clean residual min=-0.002060 max=0.002233 Jy/beam ! Clean residual mean=0.000060 rms=0.000531 Jy/beam ! Combined flux in latest and established models = 1.06357 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 218 components and 1.06357 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058232Jy sigma=0.777714 ! Fit after self-cal, rms=0.057913Jy sigma=0.772681 wmodel J1806+6949_X_map.mod ! Writing 218 model components to file: J1806+6949_X_map.mod wobs J1806+6949_X_uvs.fits ! Writing UV FITS file: J1806+6949_X_uvs.fits wwins J1806+6949_X_map.win ! wwins: Wrote 16 windows to J1806+6949_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000846791 Jy ! Component: 100 - total flux cleaned = 0.00111451 Jy ! Component: 150 - total flux cleaned = 0.00129781 Jy ! Component: 200 - total flux cleaned = 0.00151309 Jy ! Component: 250 - total flux cleaned = 0.00186607 Jy ! Component: 300 - total flux cleaned = 0.00214398 Jy ! Component: 350 - total flux cleaned = 0.00245206 Jy ! Component: 400 - total flux cleaned = 0.0027902 Jy ! Component: 450 - total flux cleaned = 0.00302417 Jy ! Component: 500 - total flux cleaned = 0.00338755 Jy ! Component: 550 - total flux cleaned = 0.00368143 Jy ! Component: 600 - total flux cleaned = 0.00390798 Jy ! Component: 650 - total flux cleaned = 0.00429258 Jy ! Component: 700 - total flux cleaned = 0.00460987 Jy ! Component: 750 - total flux cleaned = 0.00489326 Jy ! Component: 800 - total flux cleaned = 0.00517448 Jy ! Component: 850 - total flux cleaned = 0.00551547 Jy ! Component: 900 - total flux cleaned = 0.00569973 Jy ! Component: 950 - total flux cleaned = 0.00594437 Jy ! Component: 1000 - total flux cleaned = 0.00615693 Jy ! Component: 1050 - total flux cleaned = 0.00639824 Jy ! Component: 1100 - total flux cleaned = 0.00663776 Jy ! Component: 1150 - total flux cleaned = 0.0068164 Jy ! Component: 1200 - total flux cleaned = 0.0070236 Jy ! Component: 1250 - total flux cleaned = 0.0071413 Jy ! Component: 1300 - total flux cleaned = 0.00734599 Jy ! Component: 1350 - total flux cleaned = 0.00757868 Jy ! Component: 1400 - total flux cleaned = 0.00772292 Jy ! Component: 1450 - total flux cleaned = 0.00789569 Jy ! Component: 1500 - total flux cleaned = 0.00806736 Jy ! Component: 1550 - total flux cleaned = 0.00818105 Jy ! Component: 1600 - total flux cleaned = 0.00835087 Jy ! Component: 1650 - total flux cleaned = 0.00854789 Jy ! Component: 1700 - total flux cleaned = 0.0086322 Jy ! Component: 1750 - total flux cleaned = 0.0087438 Jy ! Component: 1800 - total flux cleaned = 0.00902149 Jy ! Component: 1850 - total flux cleaned = 0.00910427 Jy ! Component: 1900 - total flux cleaned = 0.0092692 Jy ! Component: 1950 - total flux cleaned = 0.00937869 Jy ! Component: 2000 - total flux cleaned = 0.00959651 Jy ! Component: 2050 - total flux cleaned = 0.00970498 Jy ! Component: 2100 - total flux cleaned = 0.00967811 Jy ! Component: 2150 - total flux cleaned = 0.00992004 Jy ! Component: 2200 - total flux cleaned = 0.0100806 Jy ! Component: 2250 - total flux cleaned = 0.0101336 Jy ! Component: 2300 - total flux cleaned = 0.0101336 Jy ! Component: 2350 - total flux cleaned = 0.0103185 Jy ! Component: 2400 - total flux cleaned = 0.0104238 Jy ! Component: 2450 - total flux cleaned = 0.0105026 Jy ! Component: 2500 - total flux cleaned = 0.0106071 Jy ! Component: 2550 - total flux cleaned = 0.0106333 Jy ! Component: 2600 - total flux cleaned = 0.0106076 Jy ! Component: 2650 - total flux cleaned = 0.0107885 Jy ! Component: 2700 - total flux cleaned = 0.0108142 Jy ! Component: 2750 - total flux cleaned = 0.0109937 Jy ! Component: 2800 - total flux cleaned = 0.0110448 Jy ! Component: 2850 - total flux cleaned = 0.0111468 Jy ! Component: 2900 - total flux cleaned = 0.0112483 Jy ! Component: 2950 - total flux cleaned = 0.0112988 Jy ! Component: 3000 - total flux cleaned = 0.0113493 Jy ! Component: 3050 - total flux cleaned = 0.0114748 Jy ! Component: 3100 - total flux cleaned = 0.0114497 Jy ! Component: 3150 - total flux cleaned = 0.0114996 Jy ! Component: 3200 - total flux cleaned = 0.0115991 Jy ! Component: 3250 - total flux cleaned = 0.0116735 Jy ! Component: 3300 - total flux cleaned = 0.0117477 Jy ! Component: 3350 - total flux cleaned = 0.0117724 Jy ! Component: 3400 - total flux cleaned = 0.0118707 Jy ! Component: 3450 - total flux cleaned = 0.0118951 Jy ! Component: 3500 - total flux cleaned = 0.0120416 Jy ! Component: 3550 - total flux cleaned = 0.0121145 Jy ! Component: 3600 - total flux cleaned = 0.0121144 Jy ! Component: 3650 - total flux cleaned = 0.0121871 Jy ! Component: 3700 - total flux cleaned = 0.0122835 Jy ! Component: 3750 - total flux cleaned = 0.0123314 Jy ! Component: 3800 - total flux cleaned = 0.0123793 Jy ! Component: 3850 - total flux cleaned = 0.0124271 Jy ! Component: 3900 - total flux cleaned = 0.0125223 Jy ! Component: 3950 - total flux cleaned = 0.012451 Jy ! Component: 4000 - total flux cleaned = 0.012451 Jy ! Component: 4050 - total flux cleaned = 0.0125691 Jy ! Total flux subtracted in 4096 components = 0.0126398 Jy ! Clean residual min=-0.001357 max=0.001461 Jy/beam ! Clean residual mean=0.000021 rms=0.000407 Jy/beam ! Combined flux in latest and established models = 1.07621 Jy keep ! Adding 374 model components to the UV plane model. ! The established model now contains 590 components and 1.07621 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv126_uvs/J1806+6949_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.047 x 1.186 at 21.41 degrees (North through East) ! Clean map min=-0.0017305 max=0.63485 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv126_uvs/J1806+6949_X_map.fits wmodel /scr/pima/rv126_uvs/J1806+6949_X_map.mod ! Writing 590 model components to file: /scr/pima/rv126_uvs/J1806+6949_X_map.mod wobs /scr/pima/rv126_uvs/J1806+6949_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv126_uvs/J1806+6949_X_uvs.fits wwins /scr/pima/rv126_uvs/J1806+6949_X_map.win ! wwins: Wrote 17 windows to /scr/pima/rv126_uvs/J1806+6949_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.63485 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000406837 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.192252 0.192252 0.384503 0.769007 1.53801 3.07603 6.15205 12.3041 24.6082 49.2164 98.4329 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.634 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1560.45 quit ! Quitting program ! Log file /scr/pima/rv126_uvs/J1806+6949_X_dfm.log closed on Sun Dec 23 03:21:49 2018