! Started logfile: /scr/pima/rv126_uvs/J0954+2639_X_dfm.log on Sun Dec 23 03:19:13 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv126_uvs/J0954+2639_X_uva.fits
! Reading UV FITS file: /scr/pima/rv126_uvs/J0954+2639_X_uva.fits
! AN table 1: 96 integrations on 36 of 36 possible baselines.
! AN table 2: 28 integrations on 3 of 3 possible baselines.
! Apparent sampling: 0.407345 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0954+2639
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 5768 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0954+2639_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 430 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 430 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 430 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 430 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.021878Jy  sigma=18.864658
! Fit after  self-cal, rms=0.803966Jy  sigma=14.825598
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9933 mas, bmaj=1.856 mas, bpa=-21.46 degrees
! Estimated noise=0.759798 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.15354 Jy
! Component: 100  -  total flux cleaned = 0.187063 Jy
! Total flux subtracted in 100 components = 0.187063 Jy
! Clean residual min=-0.004949 max=0.009594 Jy/beam
! Clean residual mean=0.000006 rms=0.001127 Jy/beam
! Combined flux in latest and established models = 0.187063 Jy
! Performing phase self-cal
! Adding 3 model components to the UV plane model.
! The established model now contains 3 components and 0.187063 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059800Jy  sigma=1.026174
! Fit after  self-cal, rms=0.059219Jy  sigma=1.022634
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00963198 Jy
! Component: 100  -  total flux cleaned = 0.0149036 Jy
! Total flux subtracted in 100 components = 0.0149036 Jy
! Clean residual min=-0.004334 max=0.006480 Jy/beam
! Clean residual mean=0.000002 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.201966 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 18 components and 0.201966 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.057474Jy  sigma=0.984384
! Fit after  self-cal, rms=0.057479Jy  sigma=0.984282
! Inverting map 
! Added new window around map position (-0.4, -3).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00582447 Jy
! Component: 100  -  total flux cleaned = 0.0092309 Jy
! Total flux subtracted in 100 components = 0.0092309 Jy
! Clean residual min=-0.003960 max=0.004300 Jy/beam
! Clean residual mean=0.000001 rms=0.000922 Jy/beam
! Combined flux in latest and established models = 0.211197 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 28 components and 0.211197 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056829Jy  sigma=0.969353
! Fit after  self-cal, rms=0.056756Jy  sigma=0.967962
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.203 mas, bmaj=2.219 mas, bpa=-17.5 degrees
! Estimated noise=0.534347 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00410736 Jy
! Component: 100  -  total flux cleaned = 0.00647673 Jy
! Component: 150  -  total flux cleaned = 0.0080154 Jy
! Component: 200  -  total flux cleaned = 0.00883354 Jy
! Total flux subtracted in 200 components = 0.00883354 Jy
! Clean residual min=-0.003402 max=0.003948 Jy/beam
! Clean residual mean=-0.000006 rms=0.000904 Jy/beam
! Combined flux in latest and established models = 0.220031 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 43 components and 0.220031 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056465Jy  sigma=0.961309
! Fit after  self-cal, rms=0.056429Jy  sigma=0.960576
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.203 x 2.219 at -17.5 degrees (North through East)
! Clean map  min=-0.003258  max=0.19625 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.95     HN        0.98     KP        1.09     
!   LA        1.00     MK        1.02     NL        1.08     OV        0.96     
!   PT        0.89     
! 
!  A total of 84 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    NY        0.00*    
! 
! 
! Correcting IF 2.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        0.93     KP        1.09     
!   LA        1.02     MK        0.99     NL        1.07     OV        0.99     
!   PT        0.90     
! 
!  A total of 84 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    NY        0.00*    
! 
! 
! Correcting IF 3.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.95     HN        0.95     KP        1.10     
!   LA        1.04     MK        1.03     NL        1.08     OV        1.01     
!   PT        0.90     
! 
!  A total of 84 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    NY        0.00*    
! 
! 
! Correcting IF 4.
!  A total of 54 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        0.93     HN        0.96     KP        1.08     
!   LA        1.04     MK        1.05     NL        1.07     OV        0.99     
!   PT        0.90     
! 
!  A total of 84 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    NY        0.00*    
! 
! 
! Fit before self-cal, rms=0.056429Jy  sigma=0.960576
! Fit after  self-cal, rms=0.051031Jy  sigma=0.922946
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.248 mas, bmaj=2.327 mas, bpa=-16.67 degrees
! Estimated noise=0.543059 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000889385 Jy
! Component: 100  -  total flux cleaned = -0.000890862 Jy
! Component: 150  -  total flux cleaned = -0.000921 Jy
! Component: 200  -  total flux cleaned = -0.000920993 Jy
! Total flux subtracted in 200 components = -0.000920993 Jy
! Clean residual min=-0.002104 max=0.002110 Jy/beam
! Clean residual mean=0.000001 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.21911 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 54 components and 0.21911 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050983Jy  sigma=0.922112
! Fit after  self-cal, rms=0.050998Jy  sigma=0.921855
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050998Jy  sigma=0.921855
! Fit after  self-cal, rms=0.050726Jy  sigma=0.912652
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.251 mas, bmaj=2.323 mas, bpa=-16.78 degrees
! Estimated noise=0.543572 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000534087 Jy
! Component: 100  -  total flux cleaned = 0.000592102 Jy
! Component: 150  -  total flux cleaned = 0.000608021 Jy
! Component: 200  -  total flux cleaned = 0.000577515 Jy
! Total flux subtracted in 200 components = 0.000577515 Jy
! Clean residual min=-0.001796 max=0.001873 Jy/beam
! Clean residual mean=0.000000 rms=0.000455 Jy/beam
! Combined flux in latest and established models = 0.219687 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 65 components and 0.219687 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050710Jy  sigma=0.912359
! Fit after  self-cal, rms=0.050715Jy  sigma=0.912293
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 7.90659e-05 Jy
! Component: 100  -  total flux cleaned = 9.36147e-05 Jy
! Component: 150  -  total flux cleaned = 7.88261e-05 Jy
! Component: 200  -  total flux cleaned = 6.54068e-05 Jy
! Total flux subtracted in 200 components = 6.54068e-05 Jy
! Clean residual min=-0.001797 max=0.001882 Jy/beam
! Clean residual mean=0.000000 rms=0.000454 Jy/beam
! Combined flux in latest and established models = 0.219753 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 70 components and 0.219753 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050705Jy  sigma=0.912137
! Fit after  self-cal, rms=0.050704Jy  sigma=0.912122
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050704Jy  sigma=0.912122
! Fit after  self-cal, rms=0.050574Jy  sigma=0.908190
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.251 mas, bmaj=2.322 mas, bpa=-16.79 degrees
! Estimated noise=0.543774 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000361297 Jy
! Component: 100  -  total flux cleaned = 0.000392177 Jy
! Component: 150  -  total flux cleaned = 0.000392588 Jy
! Component: 200  -  total flux cleaned = 0.00039352 Jy
! Total flux subtracted in 200 components = 0.00039352 Jy
! Clean residual min=-0.001682 max=0.001950 Jy/beam
! Clean residual mean=-0.000001 rms=0.000440 Jy/beam
! Combined flux in latest and established models = 0.220146 Jy
selfcal
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 73 components and 0.220146 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050564Jy  sigma=0.908029
! Fit after  self-cal, rms=0.050565Jy  sigma=0.908000
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.4, -9.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00150891 Jy
! Component: 100  -  total flux cleaned = 0.00190859 Jy
! Component: 150  -  total flux cleaned = 0.00205301 Jy
! Component: 200  -  total flux cleaned = 0.00223179 Jy
! Total flux subtracted in 200 components = 0.00223179 Jy
! Clean residual min=-0.001743 max=0.001784 Jy/beam
! Clean residual mean=0.000000 rms=0.000428 Jy/beam
! Combined flux in latest and established models = 0.222378 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 91 components and 0.222378 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050499Jy  sigma=0.906796
! Fit after  self-cal, rms=0.050494Jy  sigma=0.906715
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050494Jy  sigma=0.906715
! Fit after  self-cal, rms=0.050477Jy  sigma=0.906612
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.378 mas, bmaj=3.121 mas, bpa=0.005893 degrees
! Estimated noise=0.622432 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000420431 Jy
! Component: 100  -  total flux cleaned = 0.000439869 Jy
! Component: 150  -  total flux cleaned = 0.00047182 Jy
! Component: 200  -  total flux cleaned = 0.000485818 Jy
! Total flux subtracted in 200 components = 0.000485818 Jy
! Clean residual min=-0.001773 max=0.001697 Jy/beam
! Clean residual mean=0.000001 rms=0.000473 Jy/beam
! Combined flux in latest and established models = 0.222864 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 104 components and 0.222864 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050468Jy  sigma=0.906448
! Fit after  self-cal, rms=0.050467Jy  sigma=0.906432
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 4.20728e-05 Jy
! Component: 100  -  total flux cleaned = 4.20563e-05 Jy
! Component: 150  -  total flux cleaned = 6.62347e-05 Jy
! Component: 200  -  total flux cleaned = 7.73231e-05 Jy
! Total flux subtracted in 200 components = 7.73231e-05 Jy
! Clean residual min=-0.001762 max=0.001679 Jy/beam
! Clean residual mean=0.000001 rms=0.000471 Jy/beam
! Combined flux in latest and established models = 0.222941 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 113 components and 0.222941 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050464Jy  sigma=0.906381
! Fit after  self-cal, rms=0.050464Jy  sigma=0.906376
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.251 mas, bmaj=2.322 mas, bpa=-16.8 degrees
! Estimated noise=0.543644 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.251 x 2.322 at -16.8 degrees (North through East)
! Clean map  min=-0.0017001  max=0.19778 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.009 mas, bmaj=1.951 mas, bpa=-20.99 degrees
! Estimated noise=0.776493 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.154023 Jy
! Component: 100  -  total flux cleaned = 0.187633 Jy
! Component: 150  -  total flux cleaned = 0.197626 Jy
! Component: 200  -  total flux cleaned = 0.203634 Jy
! Total flux subtracted in 200 components = 0.203634 Jy
! Clean residual min=-0.003157 max=0.003244 Jy/beam
! Clean residual mean=0.000004 rms=0.000703 Jy/beam
! Combined flux in latest and established models = 0.203634 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.203634 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.251 mas, bmaj=2.322 mas, bpa=-16.8 degrees
! Estimated noise=0.543644 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00588685 Jy
! Component: 100  -  total flux cleaned = 0.0094543 Jy
! Component: 150  -  total flux cleaned = 0.0119704 Jy
! Component: 200  -  total flux cleaned = 0.0138463 Jy
! Total flux subtracted in 200 components = 0.0138463 Jy
! Clean residual min=-0.001733 max=0.001869 Jy/beam
! Clean residual mean=-0.000000 rms=0.000453 Jy/beam
! Combined flux in latest and established models = 0.217481 Jy
! Adding 37 model components to the UV plane model.
! The established model now contains 54 components and 0.217481 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.378 mas, bmaj=3.121 mas, bpa=0.005893 degrees
! Estimated noise=0.622432 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00192233 Jy
! Component: 100  -  total flux cleaned = 0.00311692 Jy
! Component: 150  -  total flux cleaned = 0.00381798 Jy
! Component: 200  -  total flux cleaned = 0.004153 Jy
! Total flux subtracted in 200 components = 0.004153 Jy
! Clean residual min=-0.001817 max=0.001643 Jy/beam
! Clean residual mean=0.000000 rms=0.000479 Jy/beam
! Combined flux in latest and established models = 0.221634 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000258372 Jy
! Component: 100  -  total flux cleaned = 0.0004801 Jy
! Component: 150  -  total flux cleaned = 0.000671192 Jy
! Component: 200  -  total flux cleaned = 0.000836909 Jy
! Total flux subtracted in 200 components = 0.000836909 Jy
! Clean residual min=-0.001769 max=0.001660 Jy/beam
! Clean residual mean=0.000001 rms=0.000472 Jy/beam
! Combined flux in latest and established models = 0.222471 Jy
! Adding 34 model components to the UV plane model.
! The established model now contains 82 components and 0.222471 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.251 mas, bmaj=2.322 mas, bpa=-16.8 degrees
! Estimated noise=0.543644 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000149815 Jy
! Component: 100  -  total flux cleaned = 0.000225367 Jy
! Component: 150  -  total flux cleaned = 0.000249367 Jy
! Component: 200  -  total flux cleaned = 0.000292855 Jy
! Total flux subtracted in 200 components = 0.000292855 Jy
! Clean residual min=-0.001789 max=0.001746 Jy/beam
! Clean residual mean=0.000001 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.222763 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 97 components and 0.222763 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050495Jy  sigma=0.906849
! Fit after  self-cal, rms=0.050491Jy  sigma=0.906770
wmodel J0954+2639_X_map.mod
! Writing 97 model components to file: J0954+2639_X_map.mod
wobs   J0954+2639_X_uvs.fits
! Writing UV FITS file: J0954+2639_X_uvs.fits
wwins  J0954+2639_X_map.win
! wwins: Wrote 3 windows to J0954+2639_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000321266 Jy
! Component: 100  -  total flux cleaned = 0.000354301 Jy
! Component: 150  -  total flux cleaned = 0.000414069 Jy
! Component: 200  -  total flux cleaned = 0.000385064 Jy
! Component: 250  -  total flux cleaned = 0.000412738 Jy
! Component: 300  -  total flux cleaned = 0.000277925 Jy
! Component: 350  -  total flux cleaned = 0.000252109 Jy
! Component: 400  -  total flux cleaned = 0.000225931 Jy
! Component: 450  -  total flux cleaned = 0.000149252 Jy
! Component: 500  -  total flux cleaned = 4.88696e-05 Jy
! Component: 550  -  total flux cleaned = -1.53243e-07 Jy
! Component: 600  -  total flux cleaned = -7.32187e-05 Jy
! Component: 650  -  total flux cleaned = -0.000144402 Jy
! Component: 700  -  total flux cleaned = -9.68519e-05 Jy
! Component: 750  -  total flux cleaned = -0.000143355 Jy
! Component: 800  -  total flux cleaned = -0.000189454 Jy
! Component: 850  -  total flux cleaned = -0.000280475 Jy
! Component: 900  -  total flux cleaned = -0.000370092 Jy
! Component: 950  -  total flux cleaned = -0.0003702 Jy
! Component: 1000  -  total flux cleaned = -0.000502219 Jy
! Component: 1050  -  total flux cleaned = -0.000524101 Jy
! Component: 1100  -  total flux cleaned = -0.000631526 Jy
! Component: 1150  -  total flux cleaned = -0.000652838 Jy
! Component: 1200  -  total flux cleaned = -0.000716329 Jy
! Component: 1250  -  total flux cleaned = -0.000737224 Jy
! Component: 1300  -  total flux cleaned = -0.000820034 Jy
! Component: 1350  -  total flux cleaned = -0.000861055 Jy
! Component: 1400  -  total flux cleaned = -0.000840581 Jy
! Component: 1450  -  total flux cleaned = -0.000901218 Jy
! Component: 1500  -  total flux cleaned = -0.000880965 Jy
! Component: 1550  -  total flux cleaned = -0.000960706 Jy
! Component: 1600  -  total flux cleaned = -0.000960947 Jy
! Component: 1650  -  total flux cleaned = -0.000941357 Jy
! Component: 1700  -  total flux cleaned = -0.000921594 Jy
! Component: 1750  -  total flux cleaned = -0.000960105 Jy
! Component: 1800  -  total flux cleaned = -0.000940793 Jy
! Component: 1850  -  total flux cleaned = -0.000940747 Jy
! Component: 1900  -  total flux cleaned = -0.000978504 Jy
! Component: 1950  -  total flux cleaned = -0.000959606 Jy
! Component: 2000  -  total flux cleaned = -0.000996996 Jy
! Component: 2050  -  total flux cleaned = -0.000959978 Jy
! Component: 2100  -  total flux cleaned = -0.00107006 Jy
! Component: 2150  -  total flux cleaned = -0.00108828 Jy
! Component: 2200  -  total flux cleaned = -0.00103377 Jy
! Component: 2250  -  total flux cleaned = -0.00107002 Jy
! Component: 2300  -  total flux cleaned = -0.00106985 Jy
! Component: 2350  -  total flux cleaned = -0.00108745 Jy
! Component: 2400  -  total flux cleaned = -0.00114065 Jy
! Component: 2450  -  total flux cleaned = -0.00114076 Jy
! Component: 2500  -  total flux cleaned = -0.00121072 Jy
! Component: 2550  -  total flux cleaned = -0.00112378 Jy
! Component: 2600  -  total flux cleaned = -0.00115846 Jy
! Component: 2650  -  total flux cleaned = -0.00124443 Jy
! Component: 2700  -  total flux cleaned = -0.00126165 Jy
! Component: 2750  -  total flux cleaned = -0.00122773 Jy
! Component: 2800  -  total flux cleaned = -0.0012277 Jy
! Component: 2850  -  total flux cleaned = -0.00131193 Jy
! Component: 2900  -  total flux cleaned = -0.00132872 Jy
! Component: 2950  -  total flux cleaned = -0.00129512 Jy
! Component: 3000  -  total flux cleaned = -0.00132826 Jy
! Component: 3050  -  total flux cleaned = -0.00132834 Jy
! Component: 3100  -  total flux cleaned = -0.00127929 Jy
! Component: 3150  -  total flux cleaned = -0.00132825 Jy
! Component: 3200  -  total flux cleaned = -0.00137706 Jy
! Component: 3250  -  total flux cleaned = -0.00131252 Jy
! Component: 3300  -  total flux cleaned = -0.00129647 Jy
! Component: 3350  -  total flux cleaned = -0.00129643 Jy
! Component: 3400  -  total flux cleaned = -0.0012965 Jy
! Component: 3450  -  total flux cleaned = -0.00126477 Jy
! Component: 3500  -  total flux cleaned = -0.00124907 Jy
! Component: 3550  -  total flux cleaned = -0.00131197 Jy
! Component: 3600  -  total flux cleaned = -0.00129634 Jy
! Component: 3650  -  total flux cleaned = -0.00121857 Jy
! Component: 3700  -  total flux cleaned = -0.00118775 Jy
! Component: 3750  -  total flux cleaned = -0.00107997 Jy
! Component: 3800  -  total flux cleaned = -0.00111067 Jy
! Component: 3850  -  total flux cleaned = -0.00108009 Jy
! Component: 3900  -  total flux cleaned = -0.00112568 Jy
! Component: 3950  -  total flux cleaned = -0.00111063 Jy
! Component: 4000  -  total flux cleaned = -0.00106542 Jy
! Component: 4050  -  total flux cleaned = -0.00108036 Jy
! Total flux subtracted in 4096 components = -0.00106542 Jy
! Clean residual min=-0.000958 max=0.000893 Jy/beam
! Clean residual mean=0.000002 rms=0.000272 Jy/beam
! Combined flux in latest and established models = 0.221698 Jy
keep
! Adding 311 model components to the UV plane model.
! The established model now contains 408 components and 0.221698 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv126_uvs/J0954+2639_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.251 x 2.322 at -16.8 degrees (North through East)
! Clean map  min=-0.0014029  max=0.19769 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv126_uvs/J0954+2639_X_map.fits
wmodel /scr/pima/rv126_uvs/J0954+2639_X_map.mod
! Writing 408 model components to file: /scr/pima/rv126_uvs/J0954+2639_X_map.mod
wobs   /scr/pima/rv126_uvs/J0954+2639_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv126_uvs/J0954+2639_X_uvs.fits
wwins  /scr/pima/rv126_uvs/J0954+2639_X_map.win
! wwins: Wrote 4 windows to /scr/pima/rv126_uvs/J0954+2639_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.197694 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000270716 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.410811 0.410811 0.821622 1.64324 3.28649 6.57297 13.1459 26.2919 52.5838
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0008 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.197 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  730.263 
quit
! Quitting program
! Log file /scr/pima/rv126_uvs/J0954+2639_X_dfm.log closed on Sun Dec 23 03:19:17 2018