! Started logfile: /scr/pima/rv126_uvs/J0433+2905_X_dfm.log on Sun Dec 23 03:17:57 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv126_uvs/J0433+2905_X_uva.fits
! Reading UV FITS file: /scr/pima/rv126_uvs/J0433+2905_X_uva.fits
! AN table 1: 29 integrations on 3 of 3 possible baselines.
! AN table 2: 29 integrations on 1 of 1 possible baselines.
! AN table 3: 114 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.446919 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0433+2905
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 7544 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0433+2905_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
!  A total of 464 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
!  A total of 464 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
!  A total of 464 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
!  A total of 464 telescope corrections were flagged in sub-array 3.
! 
! Fit before self-cal, rms=1.017834Jy  sigma=19.720560
! Fit after  self-cal, rms=0.860005Jy  sigma=16.724966
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.022 mas, bmaj=1.772 mas, bpa=-25.87 degrees
! Estimated noise=0.69946 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.10855 Jy
! Component: 100  -  total flux cleaned = 0.133344 Jy
! Total flux subtracted in 100 components = 0.133344 Jy
! Clean residual min=-0.004236 max=0.008881 Jy/beam
! Clean residual mean=-0.000011 rms=0.000937 Jy/beam
! Combined flux in latest and established models = 0.133344 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.133344 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055169Jy  sigma=1.002464
! Fit after  self-cal, rms=0.055154Jy  sigma=1.002262
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00880967 Jy
! Component: 100  -  total flux cleaned = 0.0126319 Jy
! Total flux subtracted in 100 components = 0.0126319 Jy
! Clean residual min=-0.003925 max=0.003654 Jy/beam
! Clean residual mean=-0.000016 rms=0.000817 Jy/beam
! Combined flux in latest and established models = 0.145976 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 18 components and 0.145976 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053669Jy  sigma=0.966232
! Fit after  self-cal, rms=0.053653Jy  sigma=0.966005
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.239 mas, bmaj=2.102 mas, bpa=-22.56 degrees
! Estimated noise=0.450822 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (1.6, 1.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00454609 Jy
! Component: 100  -  total flux cleaned = 0.00732773 Jy
! Component: 150  -  total flux cleaned = 0.00927218 Jy
! Component: 200  -  total flux cleaned = 0.0102536 Jy
! Total flux subtracted in 200 components = 0.0102536 Jy
! Clean residual min=-0.003042 max=0.002233 Jy/beam
! Clean residual mean=-0.000287 rms=0.000654 Jy/beam
! Combined flux in latest and established models = 0.15623 Jy
! Performing phase self-cal
! Adding 24 model components to the UV plane model.
! The established model now contains 38 components and 0.15623 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053306Jy  sigma=0.955771
! Fit after  self-cal, rms=0.053266Jy  sigma=0.955183
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.239 x 2.102 at -22.56 degrees (North through East)
! Clean map  min=-0.0028417  max=0.1401 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   NY        0.00*    WN        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NY        0.00*    
! 
!  A total of 90 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        0.95     HN        1.00     KP        1.10     
!   LA        1.01     MK        0.99     NL        1.03     OV        0.96     
!   PT        0.90     
! 
! 
! Correcting IF 2.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   NY        0.00*    WN        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NY        0.00*    
! 
!  A total of 90 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.00     FD        0.95     HN        0.95     KP        1.08     
!   LA        1.02     MK        1.03     NL        1.06     OV        0.98     
!   PT        0.91     
! 
! 
! Correcting IF 3.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   NY        0.00*    WN        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NY        0.00*    
! 
!  A total of 90 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.01     FD        0.97     HN        0.95     KP        1.12     
!   LA        1.00     MK        1.04     NL        1.05     OV        0.99     
!   PT        0.90     
! 
! 
! Correcting IF 4.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   NY        0.00*    WN        0.00*    WZ        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NY        0.00*    
! 
!  A total of 90 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.06     FD        0.97     HN        0.95     KP        1.13     
!   LA        1.01     MK        1.02     NL        1.05     OV        0.99     
!   PT        0.90     
! 
! 
! Fit before self-cal, rms=0.053266Jy  sigma=0.955183
! Fit after  self-cal, rms=0.050597Jy  sigma=0.945037
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=1.247 mas, bmaj=2.411 mas, bpa=-18.88 degrees
! Estimated noise=0.457186 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000212786 Jy
! Component: 100  -  total flux cleaned = -0.000162167 Jy
! Component: 150  -  total flux cleaned = -0.000118452 Jy
! Component: 200  -  total flux cleaned = -6.13618e-05 Jy
! Total flux subtracted in 200 components = -6.13618e-05 Jy
! Clean residual min=-0.001878 max=0.002253 Jy/beam
! Clean residual mean=0.000015 rms=0.000464 Jy/beam
! Combined flux in latest and established models = 0.156168 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 52 components and 0.156168 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050572Jy  sigma=0.944624
! Fit after  self-cal, rms=0.050595Jy  sigma=0.944382
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050595Jy  sigma=0.944382
! Fit after  self-cal, rms=0.050342Jy  sigma=0.937467
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.245 mas, bmaj=2.407 mas, bpa=-19.01 degrees
! Estimated noise=0.456717 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 8.37531e-05 Jy
! Component: 100  -  total flux cleaned = 8.36376e-05 Jy
! Component: 150  -  total flux cleaned = 0.000102074 Jy
! Component: 200  -  total flux cleaned = 0.000135262 Jy
! Total flux subtracted in 200 components = 0.000135262 Jy
! Clean residual min=-0.001680 max=0.001951 Jy/beam
! Clean residual mean=0.000005 rms=0.000417 Jy/beam
! Combined flux in latest and established models = 0.156304 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 65 components and 0.156304 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050324Jy  sigma=0.937175
! Fit after  self-cal, rms=0.050331Jy  sigma=0.937111
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-8.6, -22.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00126613 Jy
! Component: 100  -  total flux cleaned = 0.00135694 Jy
! Component: 150  -  total flux cleaned = 0.00126414 Jy
! Component: 200  -  total flux cleaned = 0.00121267 Jy
! Total flux subtracted in 200 components = 0.00121267 Jy
! Clean residual min=-0.001646 max=0.001690 Jy/beam
! Clean residual mean=0.000006 rms=0.000403 Jy/beam
! Combined flux in latest and established models = 0.157516 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 80 components and 0.157516 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050261Jy  sigma=0.935791
! Fit after  self-cal, rms=0.050257Jy  sigma=0.935706
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050257Jy  sigma=0.935706
! Fit after  self-cal, rms=0.050352Jy  sigma=0.932898
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.244 mas, bmaj=2.406 mas, bpa=-19.03 degrees
! Estimated noise=0.456923 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000390515 Jy
! Component: 100  -  total flux cleaned = 0.000483995 Jy
! Component: 150  -  total flux cleaned = 0.000504904 Jy
! Component: 200  -  total flux cleaned = 0.000545477 Jy
! Total flux subtracted in 200 components = 0.000545477 Jy
! Clean residual min=-0.001527 max=0.001744 Jy/beam
! Clean residual mean=-0.000001 rms=0.000392 Jy/beam
! Combined flux in latest and established models = 0.158062 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 90 components and 0.158062 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050330Jy  sigma=0.932558
! Fit after  self-cal, rms=0.050343Jy  sigma=0.932518
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-27.8, -38.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000314808 Jy
! Component: 100  -  total flux cleaned = 0.000249459 Jy
! Component: 150  -  total flux cleaned = 0.000144046 Jy
! Component: 200  -  total flux cleaned = 0.000114016 Jy
! Total flux subtracted in 200 components = 0.000114016 Jy
! Clean residual min=-0.001466 max=0.001711 Jy/beam
! Clean residual mean=-0.000001 rms=0.000378 Jy/beam
! Combined flux in latest and established models = 0.158176 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 105 components and 0.158176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050265Jy  sigma=0.930833
! Fit after  self-cal, rms=0.050262Jy  sigma=0.930742
! Inverting map 
! Added new window around map position (40.4, 5.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00157738 Jy
! Component: 100  -  total flux cleaned = 0.00227042 Jy
! Component: 150  -  total flux cleaned = 0.00245763 Jy
! Component: 200  -  total flux cleaned = 0.00245746 Jy
! Total flux subtracted in 200 components = 0.00245746 Jy
! Clean residual min=-0.001365 max=0.001458 Jy/beam
! Clean residual mean=-0.000003 rms=0.000360 Jy/beam
! Combined flux in latest and established models = 0.160633 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 121 components and 0.160633 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050196Jy  sigma=0.929554
! Fit after  self-cal, rms=0.050190Jy  sigma=0.929433
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050190Jy  sigma=0.929433
! Fit after  self-cal, rms=0.050192Jy  sigma=0.929229
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.624 mas, bmaj=2.917 mas, bpa=-21.08 degrees
! Estimated noise=0.517416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000401599 Jy
! Component: 100  -  total flux cleaned = 0.000669403 Jy
! Component: 150  -  total flux cleaned = 0.000852834 Jy
! Component: 200  -  total flux cleaned = 0.000934411 Jy
! Total flux subtracted in 200 components = 0.000934411 Jy
! Clean residual min=-0.001391 max=0.001366 Jy/beam
! Clean residual mean=-0.000006 rms=0.000391 Jy/beam
! Combined flux in latest and established models = 0.161568 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 140 components and 0.161568 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050175Jy  sigma=0.928847
! Fit after  self-cal, rms=0.050173Jy  sigma=0.928813
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000117419 Jy
! Component: 100  -  total flux cleaned = 0.000172596 Jy
! Component: 150  -  total flux cleaned = 0.00020696 Jy
! Component: 200  -  total flux cleaned = 0.000256282 Jy
! Total flux subtracted in 200 components = 0.000256282 Jy
! Clean residual min=-0.001380 max=0.001329 Jy/beam
! Clean residual mean=-0.000007 rms=0.000385 Jy/beam
! Combined flux in latest and established models = 0.161824 Jy
! Performing phase self-cal
! Adding 35 model components to the UV plane model.
! The established model now contains 156 components and 0.161824 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050165Jy  sigma=0.928634
! Fit after  self-cal, rms=0.050164Jy  sigma=0.928626
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=1.243 mas, bmaj=2.404 mas, bpa=-19.08 degrees
! Estimated noise=0.457156 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.243 x 2.404 at -19.08 degrees (North through East)
! Clean map  min=-0.0018952  max=0.14024 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=1.014 mas, bmaj=2.01 mas, bpa=-23.17 degrees
! Estimated noise=0.707911 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.108611 Jy
! Component: 100  -  total flux cleaned = 0.133801 Jy
! Component: 150  -  total flux cleaned = 0.14265 Jy
! Component: 200  -  total flux cleaned = 0.146925 Jy
! Total flux subtracted in 200 components = 0.146925 Jy
! Clean residual min=-0.003304 max=0.002957 Jy/beam
! Clean residual mean=-0.000003 rms=0.000701 Jy/beam
! Combined flux in latest and established models = 0.146925 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.146925 Jy
! Inverting map and beam 
! Estimated beam: bmin=1.243 mas, bmaj=2.404 mas, bpa=-19.08 degrees
! Estimated noise=0.457156 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00365275 Jy
! Component: 100  -  total flux cleaned = 0.00534194 Jy
! Component: 150  -  total flux cleaned = 0.0069595 Jy
! Component: 200  -  total flux cleaned = 0.0084173 Jy
! Total flux subtracted in 200 components = 0.0084173 Jy
! Clean residual min=-0.001585 max=0.001585 Jy/beam
! Clean residual mean=-0.000007 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.155342 Jy
! Adding 42 model components to the UV plane model.
! The established model now contains 53 components and 0.155342 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.624 mas, bmaj=2.917 mas, bpa=-21.08 degrees
! Estimated noise=0.517416 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00167755 Jy
! Component: 100  -  total flux cleaned = 0.00284171 Jy
! Component: 150  -  total flux cleaned = 0.00362313 Jy
! Component: 200  -  total flux cleaned = 0.00425598 Jy
! Total flux subtracted in 200 components = 0.00425598 Jy
! Clean residual min=-0.001573 max=0.001458 Jy/beam
! Clean residual mean=-0.000009 rms=0.000418 Jy/beam
! Combined flux in latest and established models = 0.159598 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000409855 Jy
! Component: 100  -  total flux cleaned = 0.000742133 Jy
! Component: 150  -  total flux cleaned = 0.000893121 Jy
! Component: 200  -  total flux cleaned = 0.00103426 Jy
! Total flux subtracted in 200 components = 0.00103426 Jy
! Clean residual min=-0.001494 max=0.001415 Jy/beam
! Clean residual mean=-0.000008 rms=0.000399 Jy/beam
! Combined flux in latest and established models = 0.160632 Jy
! Adding 65 model components to the UV plane model.
! The established model now contains 109 components and 0.160632 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=1.243 mas, bmaj=2.404 mas, bpa=-19.08 degrees
! Estimated noise=0.457156 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 9.99148e-05 Jy
! Component: 100  -  total flux cleaned = 0.000254654 Jy
! Component: 150  -  total flux cleaned = 0.000395461 Jy
! Component: 200  -  total flux cleaned = 0.000491466 Jy
! Total flux subtracted in 200 components = 0.000491466 Jy
! Clean residual min=-0.001352 max=0.001469 Jy/beam
! Clean residual mean=-0.000005 rms=0.000356 Jy/beam
! Combined flux in latest and established models = 0.161124 Jy
selfcal
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 125 components and 0.161124 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.050215Jy  sigma=0.929408
! Fit after  self-cal, rms=0.050208Jy  sigma=0.929341
wmodel J0433+2905_X_map.mod
! Writing 125 model components to file: J0433+2905_X_map.mod
wobs   J0433+2905_X_uvs.fits
! Writing UV FITS file: J0433+2905_X_uvs.fits
wwins  J0433+2905_X_map.win
! wwins: Wrote 5 windows to J0433+2905_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.000411883 Jy
! Component: 100  -  total flux cleaned = 0.000412918 Jy
! Component: 150  -  total flux cleaned = 0.000414144 Jy
! Component: 200  -  total flux cleaned = 0.000438126 Jy
! Component: 250  -  total flux cleaned = 0.000414551 Jy
! Component: 300  -  total flux cleaned = 0.000414799 Jy
! Component: 350  -  total flux cleaned = 0.000414893 Jy
! Component: 400  -  total flux cleaned = 0.000393065 Jy
! Component: 450  -  total flux cleaned = 0.000393118 Jy
! Component: 500  -  total flux cleaned = 0.000414509 Jy
! Component: 550  -  total flux cleaned = 0.000414762 Jy
! Component: 600  -  total flux cleaned = 0.000435705 Jy
! Component: 650  -  total flux cleaned = 0.000456407 Jy
! Component: 700  -  total flux cleaned = 0.00045604 Jy
! Component: 750  -  total flux cleaned = 0.000475733 Jy
! Component: 800  -  total flux cleaned = 0.000436898 Jy
! Component: 850  -  total flux cleaned = 0.000436891 Jy
! Component: 900  -  total flux cleaned = 0.000455626 Jy
! Component: 950  -  total flux cleaned = 0.00045584 Jy
! Component: 1000  -  total flux cleaned = 0.000456139 Jy
! Component: 1050  -  total flux cleaned = 0.00049317 Jy
! Component: 1100  -  total flux cleaned = 0.000511347 Jy
! Component: 1150  -  total flux cleaned = 0.000493223 Jy
! Component: 1200  -  total flux cleaned = 0.000457687 Jy
! Component: 1250  -  total flux cleaned = 0.00047538 Jy
! Component: 1300  -  total flux cleaned = 0.000370367 Jy
! Component: 1350  -  total flux cleaned = 0.000370512 Jy
! Component: 1400  -  total flux cleaned = 0.000370563 Jy
! Component: 1450  -  total flux cleaned = 0.000268399 Jy
! Component: 1500  -  total flux cleaned = 0.000302133 Jy
! Component: 1550  -  total flux cleaned = 0.000251683 Jy
! Component: 1600  -  total flux cleaned = 0.000185173 Jy
! Component: 1650  -  total flux cleaned = 8.62537e-05 Jy
! Component: 1700  -  total flux cleaned = 6.99497e-05 Jy
! Component: 1750  -  total flux cleaned = -2.74681e-05 Jy
! Component: 1800  -  total flux cleaned = -5.96097e-05 Jy
! Component: 1850  -  total flux cleaned = -0.000123707 Jy
! Component: 1900  -  total flux cleaned = -0.000235029 Jy
! Component: 1950  -  total flux cleaned = -0.000282356 Jy
! Component: 2000  -  total flux cleaned = -0.000423728 Jy
! Component: 2050  -  total flux cleaned = -0.000423709 Jy
! Component: 2100  -  total flux cleaned = -0.000501163 Jy
! Component: 2150  -  total flux cleaned = -0.000578176 Jy
! Component: 2200  -  total flux cleaned = -0.000654798 Jy
! Component: 2250  -  total flux cleaned = -0.000761037 Jy
! Component: 2300  -  total flux cleaned = -0.000836492 Jy
! Component: 2350  -  total flux cleaned = -0.000866568 Jy
! Component: 2400  -  total flux cleaned = -0.00103056 Jy
! Component: 2450  -  total flux cleaned = -0.00104524 Jy
! Component: 2500  -  total flux cleaned = -0.00101572 Jy
! Component: 2550  -  total flux cleaned = -0.00110358 Jy
! Component: 2600  -  total flux cleaned = -0.00114735 Jy
! Component: 2650  -  total flux cleaned = -0.00117633 Jy
! Component: 2700  -  total flux cleaned = -0.00121944 Jy
! Component: 2750  -  total flux cleaned = -0.00129096 Jy
! Component: 2800  -  total flux cleaned = -0.00134796 Jy
! Component: 2850  -  total flux cleaned = -0.0013621 Jy
! Component: 2900  -  total flux cleaned = -0.00146056 Jy
! Component: 2950  -  total flux cleaned = -0.00148842 Jy
! Component: 3000  -  total flux cleaned = -0.00147449 Jy
! Component: 3050  -  total flux cleaned = -0.00152998 Jy
! Component: 3100  -  total flux cleaned = -0.00157135 Jy
! Component: 3150  -  total flux cleaned = -0.00159863 Jy
! Component: 3200  -  total flux cleaned = -0.0015987 Jy
! Component: 3250  -  total flux cleaned = -0.00165308 Jy
! Component: 3300  -  total flux cleaned = -0.00163948 Jy
! Component: 3350  -  total flux cleaned = -0.00169332 Jy
! Component: 3400  -  total flux cleaned = -0.00169331 Jy
! Component: 3450  -  total flux cleaned = -0.00173341 Jy
! Component: 3500  -  total flux cleaned = -0.0017466 Jy
! Component: 3550  -  total flux cleaned = -0.00175988 Jy
! Component: 3600  -  total flux cleaned = -0.00170737 Jy
! Component: 3650  -  total flux cleaned = -0.00175978 Jy
! Component: 3700  -  total flux cleaned = -0.00181184 Jy
! Component: 3750  -  total flux cleaned = -0.00182477 Jy
! Component: 3800  -  total flux cleaned = -0.0018506 Jy
! Component: 3850  -  total flux cleaned = -0.00183768 Jy
! Component: 3900  -  total flux cleaned = -0.00181208 Jy
! Component: 3950  -  total flux cleaned = -0.00183757 Jy
! Component: 4000  -  total flux cleaned = -0.00183756 Jy
! Component: 4050  -  total flux cleaned = -0.00188819 Jy
! Total flux subtracted in 4096 components = -0.00192599 Jy
! Clean residual min=-0.000702 max=0.000731 Jy/beam
! Clean residual mean=-0.000006 rms=0.000227 Jy/beam
! Combined flux in latest and established models = 0.159198 Jy
keep
! Adding 291 model components to the UV plane model.
! The established model now contains 416 components and 0.159198 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv126_uvs/J0433+2905_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.243 x 2.404 at -19.08 degrees (North through East)
! Clean map  min=-0.0019046  max=0.14041 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv126_uvs/J0433+2905_X_map.fits
wmodel /scr/pima/rv126_uvs/J0433+2905_X_map.mod
! Writing 416 model components to file: /scr/pima/rv126_uvs/J0433+2905_X_map.mod
wobs   /scr/pima/rv126_uvs/J0433+2905_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv126_uvs/J0433+2905_X_uvs.fits
wwins  /scr/pima/rv126_uvs/J0433+2905_X_map.win
! wwins: Wrote 6 windows to /scr/pima/rv126_uvs/J0433+2905_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.140408 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000226381 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.483693 0.483693 0.967385 1.93477 3.86954 7.73908 15.4782 30.9563 61.9127
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0006 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.14 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  620.228 
quit
! Quitting program
! Log file /scr/pima/rv126_uvs/J0433+2905_X_dfm.log closed on Sun Dec 23 03:18:01 2018