! Started logfile: /scr/pima/rv126_uvs/J0229-3643_S_dfm.log on Sun Dec 23 07:35:43 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.24075
obs     /scr/pima/rv126_uvs/J0229-3643_S_uva.fits
! Reading UV FITS file: /scr/pima/rv126_uvs/J0229-3643_S_uva.fits
! AN table 1: 16 integrations on 21 of 21 possible baselines.
! AN table 2: 26 integrations on 21 of 21 possible baselines.
! Apparent sampling: 0.605442 visibilities/baseline/integration-bin.
! Found source: J0229-3643
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.24075e+09        8e+06          1        8e+06
!  02        2  2.27075e+09        8e+06          1        8e+06
!  03        3  2.36075e+09        8e+06          1        8e+06
!  04        4  2.38075e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 2136 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0229-3643_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 52 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 52 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 112 telescope corrections were flagged in sub-array 1.
!  A total of 182 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 28 telescope corrections were flagged in sub-array 1.
!  A total of 52 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.045832Jy  sigma=12.046284
! Fit after  self-cal, rms=0.726233Jy  sigma=8.212183
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.153 mas, bmaj=17.9 mas, bpa=-10.6 degrees
! Estimated noise=2.37612 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.211991 Jy
! Component: 100  -  total flux cleaned = 0.260986 Jy
! Total flux subtracted in 100 components = 0.260986 Jy
! Clean residual min=-0.016026 max=0.022499 Jy/beam
! Clean residual mean=-0.000079 rms=0.003733 Jy/beam
! Combined flux in latest and established models = 0.260986 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.260986 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.112089Jy  sigma=1.188820
! Fit after  self-cal, rms=0.112061Jy  sigma=1.188525
! Inverting map 
! Added new window around map position (-5.5, -3.5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0250995 Jy
! Component: 100  -  total flux cleaned = 0.0410108 Jy
! Total flux subtracted in 100 components = 0.0410108 Jy
! Clean residual min=-0.013694 max=0.017087 Jy/beam
! Clean residual mean=-0.000022 rms=0.003115 Jy/beam
! Combined flux in latest and established models = 0.301997 Jy
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 26 components and 0.301997 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.104009Jy  sigma=1.075834
! Fit after  self-cal, rms=0.103799Jy  sigma=1.072708
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.451 mas, bmaj=21.27 mas, bpa=-8.828 degrees
! Estimated noise=1.67115 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0170811 Jy
! Component: 100  -  total flux cleaned = 0.0216054 Jy
! Component: 150  -  total flux cleaned = 0.0232261 Jy
! Component: 200  -  total flux cleaned = 0.0242605 Jy
! Total flux subtracted in 200 components = 0.0242605 Jy
! Clean residual min=-0.013520 max=0.009555 Jy/beam
! Clean residual mean=0.000153 rms=0.002832 Jy/beam
! Combined flux in latest and established models = 0.326257 Jy
! Performing phase self-cal
! Adding 39 model components to the UV plane model.
! The established model now contains 60 components and 0.326257 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101026Jy  sigma=1.037025
! Fit after  self-cal, rms=0.100962Jy  sigma=1.036401
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.451 x 21.27 at -8.828 degrees (North through East)
! Clean map  min=-0.013491  max=0.26118 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.05     HN        1.20     KP        0.91     LA        0.97     
!   NL        1.00     OV        0.91     PT        1.05     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.07     KP        1.00     LA        0.93     MK        0.96     
!   NL        1.45     OV        0.91     PT        1.06     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.04     HN        1.20     KP        0.91     LA        0.91     
!   NL        1.12     OV        0.87     PT        1.06     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.05     KP        0.93     LA        0.96     MK        0.92     
!   NL        1.48     OV        0.87     PT        1.13     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   FD        0.00*    HN        0.00*    KP        0.00*    LA        0.00*    
!   NL        0.00*    OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   FD        0.00*    KP        0.00*    LA        0.00*    MK        0.00*    
!   NL        0.00*    OV        0.00*    PT        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   FD        1.01     HN        1.27     KP        0.93     LA        0.95     
!   NL        1.04     OV        0.89     PT        1.06     
! 
!  A total of 12 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   FD        1.03     KP        0.96     LA        0.97     MK        0.97     
!   NL        1.35     OV        0.86     PT        1.08     
! 
! 
! Fit before self-cal, rms=0.100962Jy  sigma=1.036401
! Fit after  self-cal, rms=0.098889Jy  sigma=0.950566
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.606 mas, bmaj=22.57 mas, bpa=-7.201 degrees
! Estimated noise=1.69998 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00120133 Jy
! Component: 100  -  total flux cleaned = -0.00108956 Jy
! Component: 150  -  total flux cleaned = -0.00109499 Jy
! Component: 200  -  total flux cleaned = -0.00109683 Jy
! Total flux subtracted in 200 components = -0.00109683 Jy
! Clean residual min=-0.006163 max=0.006678 Jy/beam
! Clean residual mean=0.000144 rms=0.001719 Jy/beam
! Combined flux in latest and established models = 0.325161 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 77 components and 0.325161 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098647Jy  sigma=0.947910
! Fit after  self-cal, rms=0.098847Jy  sigma=0.947304
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.098847Jy  sigma=0.947304
! Fit after  self-cal, rms=0.099903Jy  sigma=0.933142
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.609 mas, bmaj=22.6 mas, bpa=-7.195 degrees
! Estimated noise=1.70922 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000508993 Jy
! Component: 100  -  total flux cleaned = 0.000515081 Jy
! Component: 150  -  total flux cleaned = 0.000585561 Jy
! Component: 200  -  total flux cleaned = 0.000581211 Jy
! Total flux subtracted in 200 components = 0.000581211 Jy
! Clean residual min=-0.004789 max=0.005720 Jy/beam
! Clean residual mean=0.000105 rms=0.001503 Jy/beam
! Combined flux in latest and established models = 0.325742 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 99 components and 0.325742 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099767Jy  sigma=0.931959
! Fit after  self-cal, rms=0.099790Jy  sigma=0.931892
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.00383e-05 Jy
! Component: 100  -  total flux cleaned = -1.10897e-05 Jy
! Component: 150  -  total flux cleaned = -1.07066e-05 Jy
! Component: 200  -  total flux cleaned = -5.59478e-05 Jy
! Total flux subtracted in 200 components = -5.59478e-05 Jy
! Clean residual min=-0.004755 max=0.005734 Jy/beam
! Clean residual mean=0.000106 rms=0.001497 Jy/beam
! Combined flux in latest and established models = 0.325686 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 104 components and 0.325686 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099726Jy  sigma=0.931433
! Fit after  self-cal, rms=0.099714Jy  sigma=0.931406
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.099714Jy  sigma=0.931406
! Fit after  self-cal, rms=0.100911Jy  sigma=0.906901
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.62 mas, bmaj=22.69 mas, bpa=-7.21 degrees
! Estimated noise=1.70962 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00131536 Jy
! Component: 100  -  total flux cleaned = -0.0013767 Jy
! Component: 150  -  total flux cleaned = -0.00132869 Jy
! Component: 200  -  total flux cleaned = -0.00132803 Jy
! Total flux subtracted in 200 components = -0.00132803 Jy
! Clean residual min=-0.005546 max=0.005310 Jy/beam
! Clean residual mean=0.000067 rms=0.001360 Jy/beam
! Combined flux in latest and established models = 0.324358 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 109 components and 0.324358 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100799Jy  sigma=0.906373
! Fit after  self-cal, rms=0.100866Jy  sigma=0.906161
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000116176 Jy
! Component: 100  -  total flux cleaned = 7.87116e-05 Jy
! Component: 150  -  total flux cleaned = 4.32763e-05 Jy
! Component: 200  -  total flux cleaned = -2.12792e-05 Jy
! Total flux subtracted in 200 components = -2.12792e-05 Jy
! Clean residual min=-0.005482 max=0.005269 Jy/beam
! Clean residual mean=0.000069 rms=0.001358 Jy/beam
! Combined flux in latest and established models = 0.324337 Jy
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 117 components and 0.324336 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100824Jy  sigma=0.905990
! Fit after  self-cal, rms=0.100817Jy  sigma=0.905972
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.100817Jy  sigma=0.905972
! Fit after  self-cal, rms=0.101328Jy  sigma=0.905578
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.897 mas, bmaj=30.5 mas, bpa=-2.896 degrees
! Estimated noise=1.85949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000946646 Jy
! Component: 100  -  total flux cleaned = -0.00094405 Jy
! Component: 150  -  total flux cleaned = -0.000974612 Jy
! Component: 200  -  total flux cleaned = -0.00100312 Jy
! Total flux subtracted in 200 components = -0.00100312 Jy
! Clean residual min=-0.004898 max=0.004641 Jy/beam
! Clean residual mean=0.000087 rms=0.001393 Jy/beam
! Combined flux in latest and established models = 0.323333 Jy
selfcal
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 124 components and 0.323333 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101286Jy  sigma=0.905304
! Fit after  self-cal, rms=0.101300Jy  sigma=0.905296
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.97839e-06 Jy
! Component: 100  -  total flux cleaned = -2.08195e-05 Jy
! Component: 150  -  total flux cleaned = -4.38242e-05 Jy
! Component: 200  -  total flux cleaned = -6.67638e-05 Jy
! Total flux subtracted in 200 components = -6.67638e-05 Jy
! Clean residual min=-0.004922 max=0.004604 Jy/beam
! Clean residual mean=0.000088 rms=0.001390 Jy/beam
! Combined flux in latest and established models = 0.323267 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 128 components and 0.323267 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101285Jy  sigma=0.905236
! Fit after  self-cal, rms=0.101284Jy  sigma=0.905229
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.624 mas, bmaj=22.71 mas, bpa=-7.237 degrees
! Estimated noise=1.7102 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.624 x 22.71 at -7.237 degrees (North through East)
! Clean map  min=-0.005391  max=0.26709 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.197 mas, bmaj=18.57 mas, bpa=-9.607 degrees
! Estimated noise=2.43862 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.212495 Jy
! Component: 100  -  total flux cleaned = 0.260653 Jy
! Component: 150  -  total flux cleaned = 0.281976 Jy
! Component: 200  -  total flux cleaned = 0.295082 Jy
! Total flux subtracted in 200 components = 0.295082 Jy
! Clean residual min=-0.008211 max=0.007851 Jy/beam
! Clean residual mean=-0.000054 rms=0.002125 Jy/beam
! Combined flux in latest and established models = 0.295082 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 27 model components to the UV plane model.
! The established model now contains 27 components and 0.295082 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.624 mas, bmaj=22.71 mas, bpa=-7.237 degrees
! Estimated noise=1.7102 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0145977 Jy
! Component: 100  -  total flux cleaned = 0.0213071 Jy
! Component: 150  -  total flux cleaned = 0.0243728 Jy
! Component: 200  -  total flux cleaned = 0.025275 Jy
! Total flux subtracted in 200 components = 0.025275 Jy
! Clean residual min=-0.005219 max=0.005356 Jy/beam
! Clean residual mean=0.000059 rms=0.001411 Jy/beam
! Combined flux in latest and established models = 0.320357 Jy
! Adding 46 model components to the UV plane model.
! The established model now contains 70 components and 0.320357 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.897 mas, bmaj=30.5 mas, bpa=-2.896 degrees
! Estimated noise=1.85949 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00243909 Jy
! Component: 100  -  total flux cleaned = 0.00271318 Jy
! Component: 150  -  total flux cleaned = 0.00287834 Jy
! Component: 200  -  total flux cleaned = 0.00297241 Jy
! Total flux subtracted in 200 components = 0.00297241 Jy
! Clean residual min=-0.004838 max=0.004612 Jy/beam
! Clean residual mean=0.000086 rms=0.001412 Jy/beam
! Combined flux in latest and established models = 0.32333 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.7129e-05 Jy
! Component: 100  -  total flux cleaned = -3.60492e-05 Jy
! Component: 150  -  total flux cleaned = -6.78816e-05 Jy
! Component: 200  -  total flux cleaned = -6.96214e-05 Jy
! Total flux subtracted in 200 components = -6.96214e-05 Jy
! Clean residual min=-0.004818 max=0.004583 Jy/beam
! Clean residual mean=0.000087 rms=0.001399 Jy/beam
! Combined flux in latest and established models = 0.32326 Jy
! Adding 21 model components to the UV plane model.
! The established model now contains 87 components and 0.32326 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.624 mas, bmaj=22.71 mas, bpa=-7.237 degrees
! Estimated noise=1.7102 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000196008 Jy
! Component: 100  -  total flux cleaned = -0.000352419 Jy
! Component: 150  -  total flux cleaned = -0.000493667 Jy
! Component: 200  -  total flux cleaned = -0.000535764 Jy
! Total flux subtracted in 200 components = -0.000535764 Jy
! Clean residual min=-0.005340 max=0.005277 Jy/beam
! Clean residual mean=0.000061 rms=0.001360 Jy/beam
! Combined flux in latest and established models = 0.322724 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 102 components and 0.322724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.101431Jy  sigma=0.905648
! Fit after  self-cal, rms=0.101425Jy  sigma=0.905477
wmodel J0229-3643_S_map.mod
! Writing 102 model components to file: J0229-3643_S_map.mod
wobs   J0229-3643_S_uvs.fits
! Writing UV FITS file: J0229-3643_S_uvs.fits
wwins  J0229-3643_S_map.win
! wwins: Wrote 2 windows to J0229-3643_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000278579 Jy
! Component: 100  -  total flux cleaned = -0.000435194 Jy
! Component: 150  -  total flux cleaned = -0.000667811 Jy
! Component: 200  -  total flux cleaned = -0.000666634 Jy
! Component: 250  -  total flux cleaned = -0.00073884 Jy
! Component: 300  -  total flux cleaned = -0.000597291 Jy
! Component: 350  -  total flux cleaned = -0.000598039 Jy
! Component: 400  -  total flux cleaned = -0.000800926 Jy
! Component: 450  -  total flux cleaned = -0.000799813 Jy
! Component: 500  -  total flux cleaned = -0.000799886 Jy
! Component: 550  -  total flux cleaned = -0.000736425 Jy
! Component: 600  -  total flux cleaned = -0.000673986 Jy
! Component: 650  -  total flux cleaned = -0.000488177 Jy
! Component: 700  -  total flux cleaned = -0.000245394 Jy
! Component: 750  -  total flux cleaned = -6.62036e-05 Jy
! Component: 800  -  total flux cleaned = 0.000110627 Jy
! Component: 850  -  total flux cleaned = 0.000227272 Jy
! Component: 900  -  total flux cleaned = 0.000457389 Jy
! Component: 950  -  total flux cleaned = 0.000514694 Jy
! Component: 1000  -  total flux cleaned = 0.000738957 Jy
! Component: 1050  -  total flux cleaned = 0.000849435 Jy
! Component: 1100  -  total flux cleaned = 0.00079499 Jy
! Component: 1150  -  total flux cleaned = 0.00101338 Jy
! Component: 1200  -  total flux cleaned = 0.00122857 Jy
! Component: 1250  -  total flux cleaned = 0.00128165 Jy
! Component: 1300  -  total flux cleaned = 0.00138726 Jy
! Component: 1350  -  total flux cleaned = 0.00159645 Jy
! Component: 1400  -  total flux cleaned = 0.00154402 Jy
! Component: 1450  -  total flux cleaned = 0.00164718 Jy
! Component: 1500  -  total flux cleaned = 0.00169748 Jy
! Component: 1550  -  total flux cleaned = 0.00169755 Jy
! Component: 1600  -  total flux cleaned = 0.00174773 Jy
! Component: 1650  -  total flux cleaned = 0.00189729 Jy
! Component: 1700  -  total flux cleaned = 0.00194608 Jy
! Component: 1750  -  total flux cleaned = 0.00189673 Jy
! Component: 1800  -  total flux cleaned = 0.00214038 Jy
! Component: 1850  -  total flux cleaned = 0.00214026 Jy
! Component: 1900  -  total flux cleaned = 0.00218751 Jy
! Component: 1950  -  total flux cleaned = 0.00233013 Jy
! Component: 2000  -  total flux cleaned = 0.0023299 Jy
! Component: 2050  -  total flux cleaned = 0.0022828 Jy
! Component: 2100  -  total flux cleaned = 0.00237608 Jy
! Component: 2150  -  total flux cleaned = 0.00242223 Jy
! Component: 2200  -  total flux cleaned = 0.00242267 Jy
! Component: 2250  -  total flux cleaned = 0.00246867 Jy
! Component: 2300  -  total flux cleaned = 0.00251398 Jy
! Component: 2350  -  total flux cleaned = 0.00255892 Jy
! Component: 2400  -  total flux cleaned = 0.00269276 Jy
! Component: 2450  -  total flux cleaned = 0.00264837 Jy
! Component: 2500  -  total flux cleaned = 0.00273662 Jy
! Component: 2550  -  total flux cleaned = 0.00278039 Jy
! Component: 2600  -  total flux cleaned = 0.00286709 Jy
! Component: 2650  -  total flux cleaned = 0.00291042 Jy
! Component: 2700  -  total flux cleaned = 0.00291014 Jy
! Component: 2750  -  total flux cleaned = 0.00295284 Jy
! Component: 2800  -  total flux cleaned = 0.00299522 Jy
! Component: 2850  -  total flux cleaned = 0.00312149 Jy
! Component: 2900  -  total flux cleaned = 0.00312128 Jy
! Component: 2950  -  total flux cleaned = 0.00299649 Jy
! Component: 3000  -  total flux cleaned = 0.00307966 Jy
! Component: 3050  -  total flux cleaned = 0.00320322 Jy
! Component: 3100  -  total flux cleaned = 0.00316199 Jy
! Component: 3150  -  total flux cleaned = 0.00303993 Jy
! Component: 3200  -  total flux cleaned = 0.00316176 Jy
! Component: 3250  -  total flux cleaned = 0.00320198 Jy
! Component: 3300  -  total flux cleaned = 0.00316183 Jy
! Component: 3350  -  total flux cleaned = 0.00316174 Jy
! Component: 3400  -  total flux cleaned = 0.00324121 Jy
! Component: 3450  -  total flux cleaned = 0.00316218 Jy
! Component: 3500  -  total flux cleaned = 0.00320155 Jy
! Component: 3550  -  total flux cleaned = 0.00327966 Jy
! Component: 3600  -  total flux cleaned = 0.00324097 Jy
! Component: 3650  -  total flux cleaned = 0.00327965 Jy
! Component: 3700  -  total flux cleaned = 0.00327953 Jy
! Component: 3750  -  total flux cleaned = 0.00324135 Jy
! Component: 3800  -  total flux cleaned = 0.00327963 Jy
! Component: 3850  -  total flux cleaned = 0.00335557 Jy
! Component: 3900  -  total flux cleaned = 0.00331793 Jy
! Component: 3950  -  total flux cleaned = 0.00335578 Jy
! Component: 4000  -  total flux cleaned = 0.00339313 Jy
! Component: 4050  -  total flux cleaned = 0.00331887 Jy
! Total flux subtracted in 4096 components = 0.0034299 Jy
! Clean residual min=-0.002087 max=0.002198 Jy/beam
! Clean residual mean=0.000066 rms=0.000780 Jy/beam
! Combined flux in latest and established models = 0.326154 Jy
keep
! Adding 279 model components to the UV plane model.
! The established model now contains 381 components and 0.326154 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv126_uvs/J0229-3643_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.624 x 22.71 at -7.237 degrees (North through East)
! Clean map  min=-0.0046869  max=0.27028 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv126_uvs/J0229-3643_S_map.fits
wmodel /scr/pima/rv126_uvs/J0229-3643_S_map.mod
! Writing 381 model components to file: /scr/pima/rv126_uvs/J0229-3643_S_map.mod
wobs   /scr/pima/rv126_uvs/J0229-3643_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv126_uvs/J0229-3643_S_uvs.fits
wwins  /scr/pima/rv126_uvs/J0229-3643_S_map.win
! wwins: Wrote 3 windows to /scr/pima/rv126_uvs/J0229-3643_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.270282 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000775171 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.860403 0.860403 1.72081 3.44161 6.88323 13.7665 27.5329 55.0658
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0023 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.27 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  348.673 
quit
! Quitting program
! Log file /scr/pima/rv126_uvs/J0229-3643_S_dfm.log closed on Sun Dec 23 07:35:48 2018