! Started logfile: /scr/pima/rv125_uvs/J2145+1115_S_dfm.log on Sun Dec 23 07:01:41 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv125_uvs/J2145+1115_S_uva.fits
! Reading UV FITS file: /scr/pima/rv125_uvs/J2145+1115_S_uva.fits
! AN table 1: 171 integrations on 55 of 55 possible baselines.
! AN table 2: 27 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.192638 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J2145+1115
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 7996 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J2145+1115_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 1673 telescope corrections were flagged in sub-array 1.
!  A total of 99 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 1673 telescope corrections were flagged in sub-array 1.
!  A total of 99 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 1881 telescope corrections were flagged in sub-array 1.
!  A total of 243 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 1673 telescope corrections were flagged in sub-array 1.
!  A total of 99 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.021489Jy  sigma=15.613082
! Fit after  self-cal, rms=0.842572Jy  sigma=12.889387
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.064 mas, bmaj=4.323 mas, bpa=17.69 degrees
! Estimated noise=1.05835 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.125219 Jy
! Component: 100  -  total flux cleaned = 0.160272 Jy
! Total flux subtracted in 100 components = 0.160272 Jy
! Clean residual min=-0.007314 max=0.017188 Jy/beam
! Clean residual mean=-0.000031 rms=0.002077 Jy/beam
! Combined flux in latest and established models = 0.160272 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 10 components and 0.160272 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077187Jy  sigma=1.120067
! Fit after  self-cal, rms=0.077043Jy  sigma=1.118147
! Inverting map 
! Added new window around map position (1.5, -5).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0177183 Jy
! Component: 100  -  total flux cleaned = 0.0273341 Jy
! Total flux subtracted in 100 components = 0.0273341 Jy
! Clean residual min=-0.006860 max=0.011498 Jy/beam
! Clean residual mean=-0.000019 rms=0.001700 Jy/beam
! Combined flux in latest and established models = 0.187606 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 24 components and 0.187606 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072732Jy  sigma=1.045938
! Fit after  self-cal, rms=0.072477Jy  sigma=1.041323
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.055 mas, bmaj=4.554 mas, bpa=20.4 degrees
! Estimated noise=0.74512 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2, -12).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00940427 Jy
! Component: 100  -  total flux cleaned = 0.0145756 Jy
! Component: 150  -  total flux cleaned = 0.0178197 Jy
! Component: 200  -  total flux cleaned = 0.0196779 Jy
! Total flux subtracted in 200 components = 0.0196779 Jy
! Clean residual min=-0.005117 max=0.006418 Jy/beam
! Clean residual mean=-0.000014 rms=0.001311 Jy/beam
! Combined flux in latest and established models = 0.207284 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 56 components and 0.207284 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071239Jy  sigma=1.020955
! Fit after  self-cal, rms=0.071184Jy  sigma=1.019750
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.055 x 4.554 at 20.4 degrees (North through East)
! Clean map  min=-0.0045831  max=0.14818 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HH        1.03     HN        0.92     KP        0.95     
!   LA        0.96     MC        1.01     NL        1.11     OV        0.96     
!   PT        1.06     SC        1.04     WN        1.00*    
! 
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.26     HN        0.87     KP        0.93     LA        0.93     
!   MK        1.05     NL        1.19     OV        0.94     PT        1.07     
!   SC        1.02     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.97     HH        1.14     HN        0.94     KP        0.91     
!   LA        0.94     MC        0.88     NL        1.12     OV        1.03     
!   PT        1.04     SC        0.95     WN        1.00*    
! 
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.31     HN        0.96     KP        0.94     LA        0.89     
!   MK        1.04     NL        1.12     OV        0.92     PT        1.07     
!   SC        0.96     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    HH        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MC        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    WN        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   BR        0.00*    HN        0.00*    KP        0.00*    LA        0.00*    
!   MK        0.00*    NL        0.00*    OV        0.00*    PT        0.00*    
!   SC        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.94     HH        0.93     HN        0.90     KP        0.92     
!   LA        0.89     MC        1.24     NL        1.13     OV        0.98     
!   PT        1.06     SC        0.97     WN        1.00*    
! 
!  A total of 24 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   BR        1.25     HN        0.89     KP        0.92     LA        0.90     
!   MK        1.09     NL        1.11     OV        0.96     PT        1.06     
!   SC        0.94     
! 
! 
! Fit before self-cal, rms=0.071184Jy  sigma=1.019750
! Fit after  self-cal, rms=0.069459Jy  sigma=0.972228
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.044 mas, bmaj=4.6 mas, bpa=20.33 degrees
! Estimated noise=0.751552 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (4.5, -24).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00429604 Jy
! Component: 100  -  total flux cleaned = 0.00502337 Jy
! Component: 150  -  total flux cleaned = 0.00563766 Jy
! Component: 200  -  total flux cleaned = 0.00602807 Jy
! Total flux subtracted in 200 components = 0.00602807 Jy
! Clean residual min=-0.003366 max=0.003428 Jy/beam
! Clean residual mean=-0.000003 rms=0.000792 Jy/beam
! Combined flux in latest and established models = 0.213312 Jy
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 82 components and 0.213312 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069085Jy  sigma=0.966930
! Fit after  self-cal, rms=0.069114Jy  sigma=0.966176
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069114Jy  sigma=0.966176
! Fit after  self-cal, rms=0.069169Jy  sigma=0.946865
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.046 mas, bmaj=4.601 mas, bpa=20.39 degrees
! Estimated noise=0.748937 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00160005 Jy
! Component: 100  -  total flux cleaned = 0.00178989 Jy
! Component: 150  -  total flux cleaned = 0.00199876 Jy
! Component: 200  -  total flux cleaned = 0.00215004 Jy
! Total flux subtracted in 200 components = 0.00215004 Jy
! Clean residual min=-0.002803 max=0.002655 Jy/beam
! Clean residual mean=-0.000006 rms=0.000642 Jy/beam
! Combined flux in latest and established models = 0.215462 Jy
selfcal
! Performing phase self-cal
! Adding 22 model components to the UV plane model.
! The established model now contains 98 components and 0.215462 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069103Jy  sigma=0.945655
! Fit after  self-cal, rms=0.069123Jy  sigma=0.945507
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000491328 Jy
! Component: 100  -  total flux cleaned = 0.000557997 Jy
! Component: 150  -  total flux cleaned = 0.000618204 Jy
! Component: 200  -  total flux cleaned = 0.000674596 Jy
! Total flux subtracted in 200 components = 0.000674596 Jy
! Clean residual min=-0.002832 max=0.002646 Jy/beam
! Clean residual mean=-0.000006 rms=0.000636 Jy/beam
! Combined flux in latest and established models = 0.216137 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 104 components and 0.216137 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069099Jy  sigma=0.945044
! Fit after  self-cal, rms=0.069098Jy  sigma=0.945025
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069098Jy  sigma=0.945025
! Fit after  self-cal, rms=0.069275Jy  sigma=0.944886
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.046 mas, bmaj=4.603 mas, bpa=20.39 degrees
! Estimated noise=0.749374 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00058348 Jy
! Component: 100  -  total flux cleaned = 0.000733488 Jy
! Component: 150  -  total flux cleaned = 0.000787697 Jy
! Component: 200  -  total flux cleaned = 0.000813301 Jy
! Total flux subtracted in 200 components = 0.000813301 Jy
! Clean residual min=-0.002817 max=0.002606 Jy/beam
! Clean residual mean=-0.000007 rms=0.000624 Jy/beam
! Combined flux in latest and established models = 0.21695 Jy
selfcal
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 113 components and 0.21695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069254Jy  sigma=0.944485
! Fit after  self-cal, rms=0.069255Jy  sigma=0.944466
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000278617 Jy
! Component: 100  -  total flux cleaned = 0.000324602 Jy
! Component: 150  -  total flux cleaned = 0.000345684 Jy
! Component: 200  -  total flux cleaned = 0.000345555 Jy
! Total flux subtracted in 200 components = 0.000345555 Jy
! Clean residual min=-0.002831 max=0.002589 Jy/beam
! Clean residual mean=-0.000007 rms=0.000621 Jy/beam
! Combined flux in latest and established models = 0.217296 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 121 components and 0.217296 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069242Jy  sigma=0.944249
! Fit after  self-cal, rms=0.069242Jy  sigma=0.944240
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069242Jy  sigma=0.944240
! Fit after  self-cal, rms=0.069356Jy  sigma=0.944186
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.904 mas, bmaj=9.992 mas, bpa=2.986 degrees
! Estimated noise=1.0239 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000494986 Jy
! Component: 100  -  total flux cleaned = 0.00030125 Jy
! Component: 150  -  total flux cleaned = 0.000203731 Jy
! Component: 200  -  total flux cleaned = 0.000137342 Jy
! Total flux subtracted in 200 components = 0.000137342 Jy
! Clean residual min=-0.003412 max=0.003256 Jy/beam
! Clean residual mean=-0.000021 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.217433 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 130 components and 0.217433 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069348Jy  sigma=0.944270
! Fit after  self-cal, rms=0.069345Jy  sigma=0.944253
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 6.59753e-05 Jy
! Component: 100  -  total flux cleaned = 2.36632e-05 Jy
! Component: 150  -  total flux cleaned = -2.044e-07 Jy
! Component: 200  -  total flux cleaned = -1.04734e-05 Jy
! Total flux subtracted in 200 components = -1.04734e-05 Jy
! Clean residual min=-0.003461 max=0.003236 Jy/beam
! Clean residual mean=-0.000021 rms=0.000861 Jy/beam
! Combined flux in latest and established models = 0.217423 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 137 components and 0.217423 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069344Jy  sigma=0.944295
! Fit after  self-cal, rms=0.069343Jy  sigma=0.944290
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.046 mas, bmaj=4.603 mas, bpa=20.39 degrees
! Estimated noise=0.749825 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.046 x 4.603 at 20.39 degrees (North through East)
! Clean map  min=-0.0025136  max=0.14756 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.04 mas, bmaj=4.378 mas, bpa=18.12 degrees
! Estimated noise=1.07792 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.126096 Jy
! Component: 100  -  total flux cleaned = 0.162815 Jy
! Component: 150  -  total flux cleaned = 0.179311 Jy
! Component: 200  -  total flux cleaned = 0.188284 Jy
! Total flux subtracted in 200 components = 0.188284 Jy
! Clean residual min=-0.004115 max=0.005405 Jy/beam
! Clean residual mean=-0.000019 rms=0.001025 Jy/beam
! Combined flux in latest and established models = 0.188284 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 32 model components to the UV plane model.
! The established model now contains 32 components and 0.188284 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.046 mas, bmaj=4.603 mas, bpa=20.39 degrees
! Estimated noise=0.749825 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00848535 Jy
! Component: 100  -  total flux cleaned = 0.0138801 Jy
! Component: 150  -  total flux cleaned = 0.0177314 Jy
! Component: 200  -  total flux cleaned = 0.0206399 Jy
! Total flux subtracted in 200 components = 0.0206399 Jy
! Clean residual min=-0.002992 max=0.002764 Jy/beam
! Clean residual mean=-0.000012 rms=0.000678 Jy/beam
! Combined flux in latest and established models = 0.208923 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 78 components and 0.208923 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=7.904 mas, bmaj=9.992 mas, bpa=2.986 degrees
! Estimated noise=1.0239 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00375931 Jy
! Component: 100  -  total flux cleaned = 0.00587985 Jy
! Component: 150  -  total flux cleaned = 0.00716808 Jy
! Component: 200  -  total flux cleaned = 0.00784346 Jy
! Total flux subtracted in 200 components = 0.00784346 Jy
! Clean residual min=-0.003468 max=0.003188 Jy/beam
! Clean residual mean=-0.000022 rms=0.000862 Jy/beam
! Combined flux in latest and established models = 0.216767 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000153565 Jy
! Component: 100  -  total flux cleaned = 0.000240952 Jy
! Component: 150  -  total flux cleaned = 0.000318344 Jy
! Component: 200  -  total flux cleaned = 0.000386236 Jy
! Total flux subtracted in 200 components = 0.000386236 Jy
! Clean residual min=-0.003470 max=0.003172 Jy/beam
! Clean residual mean=-0.000021 rms=0.000860 Jy/beam
! Combined flux in latest and established models = 0.217153 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 124 components and 0.217153 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.046 mas, bmaj=4.603 mas, bpa=20.39 degrees
! Estimated noise=0.749825 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000177556 Jy
! Component: 100  -  total flux cleaned = -0.000180149 Jy
! Component: 150  -  total flux cleaned = -0.00014432 Jy
! Component: 200  -  total flux cleaned = -0.000110425 Jy
! Total flux subtracted in 200 components = -0.000110425 Jy
! Clean residual min=-0.002984 max=0.002615 Jy/beam
! Clean residual mean=-0.000008 rms=0.000620 Jy/beam
! Combined flux in latest and established models = 0.217043 Jy
selfcal
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 136 components and 0.217043 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.069371Jy  sigma=0.944618
! Fit after  self-cal, rms=0.069351Jy  sigma=0.944509
wmodel J2145+1115_S_map.mod
! Writing 136 model components to file: J2145+1115_S_map.mod
wobs   J2145+1115_S_uvs.fits
! Writing UV FITS file: J2145+1115_S_uvs.fits
wwins  J2145+1115_S_map.win
! wwins: Wrote 4 windows to J2145+1115_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000343072 Jy
! Component: 100  -  total flux cleaned = -0.000297983 Jy
! Component: 150  -  total flux cleaned = -8.02494e-05 Jy
! Component: 200  -  total flux cleaned = 4.54096e-05 Jy
! Component: 250  -  total flux cleaned = 0.000207523 Jy
! Component: 300  -  total flux cleaned = 0.000404434 Jy
! Component: 350  -  total flux cleaned = 0.000519944 Jy
! Component: 400  -  total flux cleaned = 0.000781841 Jy
! Component: 450  -  total flux cleaned = 0.000927663 Jy
! Component: 500  -  total flux cleaned = 0.000998162 Jy
! Component: 550  -  total flux cleaned = 0.000963377 Jy
! Component: 600  -  total flux cleaned = 0.000963349 Jy
! Component: 650  -  total flux cleaned = 0.00096293 Jy
! Component: 700  -  total flux cleaned = 0.000897404 Jy
! Component: 750  -  total flux cleaned = 0.000962317 Jy
! Component: 800  -  total flux cleaned = 0.000961948 Jy
! Component: 850  -  total flux cleaned = 0.00102441 Jy
! Component: 900  -  total flux cleaned = 0.000963355 Jy
! Component: 950  -  total flux cleaned = 0.000963517 Jy
! Component: 1000  -  total flux cleaned = 0.000993631 Jy
! Component: 1050  -  total flux cleaned = 0.000993783 Jy
! Component: 1100  -  total flux cleaned = 0.000935902 Jy
! Component: 1150  -  total flux cleaned = 0.00105024 Jy
! Component: 1200  -  total flux cleaned = 0.000993547 Jy
! Component: 1250  -  total flux cleaned = 0.00104993 Jy
! Component: 1300  -  total flux cleaned = 0.00110446 Jy
! Component: 1350  -  total flux cleaned = 0.00107695 Jy
! Component: 1400  -  total flux cleaned = 0.00110395 Jy
! Component: 1450  -  total flux cleaned = 0.00118404 Jy
! Component: 1500  -  total flux cleaned = 0.00115744 Jy
! Component: 1550  -  total flux cleaned = 0.00120983 Jy
! Component: 1600  -  total flux cleaned = 0.00131398 Jy
! Component: 1650  -  total flux cleaned = 0.00123691 Jy
! Component: 1700  -  total flux cleaned = 0.00126272 Jy
! Component: 1750  -  total flux cleaned = 0.00121205 Jy
! Component: 1800  -  total flux cleaned = 0.00121241 Jy
! Component: 1850  -  total flux cleaned = 0.00118724 Jy
! Component: 1900  -  total flux cleaned = 0.00113808 Jy
! Component: 1950  -  total flux cleaned = 0.00108941 Jy
! Component: 2000  -  total flux cleaned = 0.00104132 Jy
! Component: 2050  -  total flux cleaned = 0.0011134 Jy
! Component: 2100  -  total flux cleaned = 0.00106599 Jy
! Component: 2150  -  total flux cleaned = 0.0010185 Jy
! Component: 2200  -  total flux cleaned = 0.00092476 Jy
! Component: 2250  -  total flux cleaned = 0.00094841 Jy
! Component: 2300  -  total flux cleaned = 0.000833214 Jy
! Component: 2350  -  total flux cleaned = 0.000833208 Jy
! Component: 2400  -  total flux cleaned = 0.000765156 Jy
! Component: 2450  -  total flux cleaned = 0.000765001 Jy
! Component: 2500  -  total flux cleaned = 0.000630473 Jy
! Component: 2550  -  total flux cleaned = 0.000563675 Jy
! Component: 2600  -  total flux cleaned = 0.000453378 Jy
! Component: 2650  -  total flux cleaned = 0.000431391 Jy
! Component: 2700  -  total flux cleaned = 0.000387834 Jy
! Component: 2750  -  total flux cleaned = 0.000322838 Jy
! Component: 2800  -  total flux cleaned = 0.000236846 Jy
! Component: 2850  -  total flux cleaned = 0.000215341 Jy
! Component: 2900  -  total flux cleaned = 0.000109136 Jy
! Component: 2950  -  total flux cleaned = 6.68978e-05 Jy
! Component: 3000  -  total flux cleaned = 8.77999e-05 Jy
! Component: 3050  -  total flux cleaned = -5.80608e-05 Jy
! Component: 3100  -  total flux cleaned = -0.000140995 Jy
! Component: 3150  -  total flux cleaned = -0.000161531 Jy
! Component: 3200  -  total flux cleaned = -0.000161541 Jy
! Component: 3250  -  total flux cleaned = -0.000283245 Jy
! Component: 3300  -  total flux cleaned = -0.000363991 Jy
! Component: 3350  -  total flux cleaned = -0.000323876 Jy
! Component: 3400  -  total flux cleaned = -0.00044357 Jy
! Component: 3450  -  total flux cleaned = -0.000364039 Jy
! Component: 3500  -  total flux cleaned = -0.000482129 Jy
! Component: 3550  -  total flux cleaned = -0.000560496 Jy
! Component: 3600  -  total flux cleaned = -0.000658002 Jy
! Component: 3650  -  total flux cleaned = -0.000677426 Jy
! Component: 3700  -  total flux cleaned = -0.00077369 Jy
! Component: 3750  -  total flux cleaned = -0.000831045 Jy
! Component: 3800  -  total flux cleaned = -0.000792932 Jy
! Component: 3850  -  total flux cleaned = -0.00100128 Jy
! Component: 3900  -  total flux cleaned = -0.000944773 Jy
! Component: 3950  -  total flux cleaned = -0.00115102 Jy
! Component: 4000  -  total flux cleaned = -0.00118813 Jy
! Component: 4050  -  total flux cleaned = -0.00124376 Jy
! Total flux subtracted in 4096 components = -0.00129929 Jy
! Clean residual min=-0.001047 max=0.000998 Jy/beam
! Clean residual mean=-0.000004 rms=0.000317 Jy/beam
! Combined flux in latest and established models = 0.215743 Jy
keep
! Adding 286 model components to the UV plane model.
! The established model now contains 422 components and 0.215743 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv125_uvs/J2145+1115_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.046 x 4.603 at 20.39 degrees (North through East)
! Clean map  min=-0.0019806  max=0.14884 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv125_uvs/J2145+1115_S_map.fits
wmodel /scr/pima/rv125_uvs/J2145+1115_S_map.mod
! Writing 422 model components to file: /scr/pima/rv125_uvs/J2145+1115_S_map.mod
wobs   /scr/pima/rv125_uvs/J2145+1115_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv125_uvs/J2145+1115_S_uvs.fits
wwins  /scr/pima/rv125_uvs/J2145+1115_S_map.win
! wwins: Wrote 5 windows to /scr/pima/rv125_uvs/J2145+1115_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.148843 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000315716 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.63634 0.63634 1.27268 2.54536 5.09072 10.1814 20.3629 40.7258 81.4515
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.148 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  471.446 
quit
! Quitting program
! Log file /scr/pima/rv125_uvs/J2145+1115_S_dfm.log closed on Sun Dec 23 07:01:45 2018