! Started logfile: /scr/pima/rv125_uvs/J1044+8054_X_dfm.log on Sun Dec 23 02:50:46 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv125_uvs/J1044+8054_X_uva.fits ! Reading UV FITS file: /scr/pima/rv125_uvs/J1044+8054_X_uva.fits ! AN table 1: 2 integrations on 3 of 3 possible baselines. ! AN table 2: 101 integrations on 55 of 55 possible baselines. ! AN table 3: 3 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.410109 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1044+8054 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 9152 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1044+8054_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 571 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 571 telescope corrections were flagged in sub-array 2. ! A total of 4 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 591 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 591 telescope corrections were flagged in sub-array 2. ! A total of 6 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.329895Jy sigma=19.906897 ! Fit after self-cal, rms=0.268960Jy sigma=4.128795 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.162% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Estimated beam: bmin=0.6506 mas, bmaj=0.9411 mas, bpa=66.51 degrees ! Estimated noise=0.81897 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.595088 Jy ! Component: 100 - total flux cleaned = 0.762702 Jy ! Total flux subtracted in 100 components = 0.762702 Jy ! Clean residual min=-0.014662 max=0.073710 Jy/beam ! Clean residual mean=0.000022 rms=0.003857 Jy/beam ! Combined flux in latest and established models = 0.762702 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.762702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.202186Jy sigma=2.966896 ! Fit after self-cal, rms=0.200882Jy sigma=2.948786 ! Inverting map ! Your choice of large map pixels excluded 0.162% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0838912 Jy ! Component: 100 - total flux cleaned = 0.124589 Jy ! Total flux subtracted in 100 components = 0.124589 Jy ! Clean residual min=-0.012672 max=0.038688 Jy/beam ! Clean residual mean=0.000020 rms=0.002735 Jy/beam ! Combined flux in latest and established models = 0.887291 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 16 components and 0.887291 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143376Jy sigma=2.088146 ! Fit after self-cal, rms=0.142056Jy sigma=2.070101 ! Inverting map ! Your choice of large map pixels excluded 0.162% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Added new window around map position (-2, 0.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0383366 Jy ! Component: 100 - total flux cleaned = 0.0603721 Jy ! Total flux subtracted in 100 components = 0.0603721 Jy ! Clean residual min=-0.011245 max=0.015690 Jy/beam ! Clean residual mean=0.000017 rms=0.002358 Jy/beam ! Combined flux in latest and established models = 0.947663 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 26 components and 0.947663 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124225Jy sigma=1.799203 ! Fit after self-cal, rms=0.122945Jy sigma=1.779531 ! Inverting map ! Your choice of large map pixels excluded 0.162% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0196426 Jy ! Component: 100 - total flux cleaned = 0.032607 Jy ! Total flux subtracted in 100 components = 0.032607 Jy ! Clean residual min=-0.010563 max=0.013610 Jy/beam ! Clean residual mean=0.000015 rms=0.002211 Jy/beam ! Combined flux in latest and established models = 0.98027 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 29 components and 0.98027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116469Jy sigma=1.680679 ! Fit after self-cal, rms=0.116139Jy sigma=1.675714 ! Inverting map ! Your choice of large map pixels excluded 0.162% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Added new window around map position (-5.8, 1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0121646 Jy ! Component: 100 - total flux cleaned = 0.0173006 Jy ! Total flux subtracted in 100 components = 0.0173006 Jy ! Clean residual min=-0.010153 max=0.012875 Jy/beam ! Clean residual mean=0.000015 rms=0.002148 Jy/beam ! Combined flux in latest and established models = 0.997571 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 35 components and 0.997571 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113654Jy sigma=1.636812 ! Fit after self-cal, rms=0.113523Jy sigma=1.634996 ! Inverting map ! Your choice of large map pixels excluded 0.162% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.162% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Estimated beam: bmin=0.7847 mas, bmaj=1.32 mas, bpa=64.45 degrees ! Estimated noise=0.557645 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0188603 Jy ! Component: 100 - total flux cleaned = 0.0309308 Jy ! Component: 150 - total flux cleaned = 0.0395005 Jy ! Component: 200 - total flux cleaned = 0.0452853 Jy ! Total flux subtracted in 200 components = 0.0452853 Jy ! Clean residual min=-0.014197 max=0.014381 Jy/beam ! Clean residual mean=0.000113 rms=0.003386 Jy/beam ! Combined flux in latest and established models = 1.04286 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 48 components and 1.04286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109673Jy sigma=1.579988 ! Fit after self-cal, rms=0.109483Jy sigma=1.577026 ! Inverting map ! Your choice of large map pixels excluded 0.162% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7847 x 1.32 at 64.45 degrees (North through East) ! Clean map min=-0.013456 max=0.77928 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MC 0.00* NY 0.00* WN 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 HN 1.05 KP 1.10 LA 1.03 ! MC 0.90 MK 0.97 NL 1.05 NY 0.85 ! OV 0.98 PT 0.87 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.90 MK 1.05 NY 0.86 WN 1.42 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! MC 0.00* NY 0.00* WN 0.00* ! ! A total of 42 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 HN 1.04 KP 1.09 LA 1.03 ! MC 0.96 MK 0.96 NL 1.05 NY 0.96 ! OV 0.98 PT 0.87 SC 1.01 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 MK 0.97 NY 0.98 WN 1.52 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! MC 0.00* NY 0.00* WN 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 HN 1.02 KP 1.09 LA 1.02 ! MC 1.30 MK 0.96 NL 1.04 NY 1.00* ! OV 0.98 PT 0.86 SC 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* NY 0.00* WN 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! MC 0.00* NY 0.00* WN 0.00* ! ! A total of 36 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 HN 1.02 KP 1.08 LA 1.02 ! MC 1.18 MK 0.96 NL 1.04 NY 1.00* ! OV 0.98 PT 0.86 SC 1.01 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* MK 0.00* NY 0.00* WN 0.00* ! ! ! Fit before self-cal, rms=0.109483Jy sigma=1.577026 ! Fit after self-cal, rms=0.074121Jy sigma=1.043944 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Estimated beam: bmin=0.7907 mas, bmaj=1.347 mas, bpa=65.4 degrees ! Estimated noise=0.561906 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00188677 Jy ! Component: 100 - total flux cleaned = -0.00238766 Jy ! Component: 150 - total flux cleaned = -0.00309187 Jy ! Component: 200 - total flux cleaned = -0.0036802 Jy ! Total flux subtracted in 200 components = -0.0036802 Jy ! Clean residual min=-0.004106 max=0.005789 Jy/beam ! Clean residual mean=0.000020 rms=0.000957 Jy/beam ! Combined flux in latest and established models = 1.03918 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 60 components and 1.03918 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073358Jy sigma=1.033555 ! Fit after self-cal, rms=0.073289Jy sigma=1.031897 ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Added new window around map position (-7.6, -5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00278855 Jy ! Component: 100 - total flux cleaned = 0.00347944 Jy ! Component: 150 - total flux cleaned = 0.00316594 Jy ! Component: 200 - total flux cleaned = 0.0027178 Jy ! Total flux subtracted in 200 components = 0.0027178 Jy ! Clean residual min=-0.003862 max=0.004386 Jy/beam ! Clean residual mean=0.000019 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 1.04189 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 69 components and 1.04189 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072795Jy sigma=1.025329 ! Fit after self-cal, rms=0.072745Jy sigma=1.024607 ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072745Jy sigma=1.024607 ! Fit after self-cal, rms=0.068142Jy sigma=0.944559 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Estimated beam: bmin=0.7896 mas, bmaj=1.35 mas, bpa=65.09 degrees ! Estimated noise=0.561681 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127129 Jy ! Component: 100 - total flux cleaned = 0.000452574 Jy ! Component: 150 - total flux cleaned = 0.000201169 Jy ! Component: 200 - total flux cleaned = 0.00012713 Jy ! Total flux subtracted in 200 components = 0.00012713 Jy ! Clean residual min=-0.002592 max=0.003606 Jy/beam ! Clean residual mean=-0.000000 rms=0.000636 Jy/beam ! Combined flux in latest and established models = 1.04202 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 80 components and 1.04202 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067840Jy sigma=0.939953 ! Fit after self-cal, rms=0.067821Jy sigma=0.939562 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, -6.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00287692 Jy ! Component: 100 - total flux cleaned = 0.003278 Jy ! Component: 150 - total flux cleaned = 0.00334858 Jy ! Component: 200 - total flux cleaned = 0.00341343 Jy ! Total flux subtracted in 200 components = 0.00341343 Jy ! Clean residual min=-0.002399 max=0.003005 Jy/beam ! Clean residual mean=-0.000001 rms=0.000601 Jy/beam ! Combined flux in latest and established models = 1.04543 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 86 components and 1.04543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067611Jy sigma=0.936491 ! Fit after self-cal, rms=0.067599Jy sigma=0.936292 ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Added new window around map position (-7.6, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00306635 Jy ! Component: 100 - total flux cleaned = 0.00354169 Jy ! Component: 150 - total flux cleaned = 0.00340709 Jy ! Component: 200 - total flux cleaned = 0.0032234 Jy ! Total flux subtracted in 200 components = 0.0032234 Jy ! Clean residual min=-0.002566 max=0.002477 Jy/beam ! Clean residual mean=-0.000003 rms=0.000576 Jy/beam ! Combined flux in latest and established models = 1.04866 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 98 components and 1.04866 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067410Jy sigma=0.933456 ! Fit after self-cal, rms=0.067398Jy sigma=0.933272 ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.067398Jy sigma=0.933272 ! Fit after self-cal, rms=0.066321Jy sigma=0.918346 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Estimated beam: bmin=0.7892 mas, bmaj=1.351 mas, bpa=65.01 degrees ! Estimated noise=0.56175 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00141173 Jy ! Component: 100 - total flux cleaned = 0.0014163 Jy ! Component: 150 - total flux cleaned = 0.00123373 Jy ! Component: 200 - total flux cleaned = 0.00117835 Jy ! Total flux subtracted in 200 components = 0.00117835 Jy ! Clean residual min=-0.002356 max=0.002348 Jy/beam ! Clean residual mean=-0.000002 rms=0.000529 Jy/beam ! Combined flux in latest and established models = 1.04984 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 111 components and 1.04984 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066191Jy sigma=0.916336 ! Fit after self-cal, rms=0.066184Jy sigma=0.916213 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000206682 Jy ! Component: 100 - total flux cleaned = 0.000206574 Jy ! Component: 150 - total flux cleaned = 0.000206384 Jy ! Component: 200 - total flux cleaned = 0.000161787 Jy ! Total flux subtracted in 200 components = 0.000161787 Jy ! Clean residual min=-0.002331 max=0.002287 Jy/beam ! Clean residual mean=-0.000002 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 1.05 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 116 components and 1.05 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066116Jy sigma=0.915170 ! Fit after self-cal, rms=0.066112Jy sigma=0.915121 ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066112Jy sigma=0.915121 ! Fit after self-cal, rms=0.066097Jy sigma=0.914804 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Estimated beam: bmin=2.064 mas, bmaj=2.891 mas, bpa=75.09 degrees ! Estimated noise=0.771879 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00107062 Jy ! Component: 100 - total flux cleaned = 0.0012525 Jy ! Component: 150 - total flux cleaned = 0.0013972 Jy ! Component: 200 - total flux cleaned = 0.00139631 Jy ! Total flux subtracted in 200 components = 0.00139631 Jy ! Clean residual min=-0.002156 max=0.002433 Jy/beam ! Clean residual mean=-0.000005 rms=0.000561 Jy/beam ! Combined flux in latest and established models = 1.05139 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 129 components and 1.05139 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066072Jy sigma=0.914380 ! Fit after self-cal, rms=0.066070Jy sigma=0.914323 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000276368 Jy ! Component: 100 - total flux cleaned = 0.000304092 Jy ! Component: 150 - total flux cleaned = 0.000303494 Jy ! Component: 200 - total flux cleaned = 0.00032801 Jy ! Total flux subtracted in 200 components = 0.00032801 Jy ! Clean residual min=-0.002136 max=0.002444 Jy/beam ! Clean residual mean=-0.000006 rms=0.000566 Jy/beam ! Combined flux in latest and established models = 1.05172 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 131 components and 1.05172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066062Jy sigma=0.914155 ! Fit after self-cal, rms=0.066062Jy sigma=0.914139 ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Added new window around map position (34, -30.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00145567 Jy ! Component: 100 - total flux cleaned = 0.00181341 Jy ! Component: 150 - total flux cleaned = 0.00185436 Jy ! Component: 200 - total flux cleaned = 0.00205453 Jy ! Total flux subtracted in 200 components = 0.00205453 Jy ! Clean residual min=-0.001994 max=0.002282 Jy/beam ! Clean residual mean=-0.000002 rms=0.000539 Jy/beam ! Combined flux in latest and established models = 1.05378 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 157 components and 1.05378 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066010Jy sigma=0.913331 ! Fit after self-cal, rms=0.066006Jy sigma=0.913259 ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Estimated beam: bmin=0.7889 mas, bmaj=1.352 mas, bpa=64.97 degrees ! Estimated noise=0.561856 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7889 x 1.352 at 64.97 degrees (North through East) ! Clean map min=-0.0019146 max=0.77947 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066006Jy sigma=0.913259 ! Fit after self-cal, rms=0.060535Jy sigma=0.790034 ! Inverting map and beam ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Estimated beam: bmin=0.7887 mas, bmaj=1.351 mas, bpa=64.94 degrees ! Estimated noise=0.561756 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00108214 Jy ! Component: 100 - total flux cleaned = 0.00114314 Jy ! Component: 150 - total flux cleaned = 0.00103776 Jy ! Component: 200 - total flux cleaned = 0.00103849 Jy ! Total flux subtracted in 200 components = 0.00103849 Jy ! Clean residual min=-0.001954 max=0.002053 Jy/beam ! Clean residual mean=-0.000001 rms=0.000465 Jy/beam ! Combined flux in latest and established models = 1.05481 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 178 components and 1.05481 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060433Jy sigma=0.788585 ! Fit after self-cal, rms=0.060432Jy sigma=0.788534 ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Added new window around map position (0.4, 12). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000842947 Jy ! Component: 100 - total flux cleaned = 0.00089976 Jy ! Component: 150 - total flux cleaned = 0.000899791 Jy ! Component: 200 - total flux cleaned = 0.000807792 Jy ! Total flux subtracted in 200 components = 0.000807792 Jy ! Clean residual min=-0.001895 max=0.001949 Jy/beam ! Clean residual mean=-0.000002 rms=0.000458 Jy/beam ! Combined flux in latest and established models = 1.05562 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 192 components and 1.05562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060328Jy sigma=0.787213 ! Fit after self-cal, rms=0.060328Jy sigma=0.787178 ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Added new window around map position (-13.2, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00131944 Jy ! Component: 100 - total flux cleaned = 0.00191629 Jy ! Component: 150 - total flux cleaned = 0.00218899 Jy ! Component: 200 - total flux cleaned = 0.00236301 Jy ! Total flux subtracted in 200 components = 0.00236301 Jy ! Clean residual min=-0.001883 max=0.001932 Jy/beam ! Clean residual mean=-0.000002 rms=0.000451 Jy/beam ! Combined flux in latest and established models = 1.05799 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 214 components and 1.05799 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060233Jy sigma=0.785801 ! Fit after self-cal, rms=0.060232Jy sigma=0.785765 ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Added new window around map position (24.8, 11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000526271 Jy ! Component: 100 - total flux cleaned = 0.000576838 Jy ! Component: 150 - total flux cleaned = 0.000756698 Jy ! Component: 200 - total flux cleaned = 0.00088309 Jy ! Total flux subtracted in 200 components = 0.00088309 Jy ! Clean residual min=-0.001933 max=0.001896 Jy/beam ! Clean residual mean=-0.000002 rms=0.000446 Jy/beam ! Combined flux in latest and established models = 1.05887 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 227 components and 1.05887 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060140Jy sigma=0.784366 ! Fit after self-cal, rms=0.060140Jy sigma=0.784333 ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060140Jy sigma=0.784333 ! Fit after self-cal, rms=0.060114Jy sigma=0.784066 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Estimated beam: bmin=0.6503 mas, bmaj=0.9599 mas, bpa=67.68 degrees ! Estimated noise=0.833347 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.599419 Jy ! Component: 100 - total flux cleaned = 0.785621 Jy ! Component: 150 - total flux cleaned = 0.869901 Jy ! Component: 200 - total flux cleaned = 0.917941 Jy ! Total flux subtracted in 200 components = 0.917941 Jy ! Clean residual min=-0.005788 max=0.025420 Jy/beam ! Clean residual mean=0.000006 rms=0.001458 Jy/beam ! Combined flux in latest and established models = 0.917941 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 14 model components to the UV plane model. ! The established model now contains 14 components and 0.917941 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Estimated beam: bmin=0.7886 mas, bmaj=1.352 mas, bpa=64.93 degrees ! Estimated noise=0.561804 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0443638 Jy ! Component: 100 - total flux cleaned = 0.0694396 Jy ! Component: 150 - total flux cleaned = 0.0849923 Jy ! Component: 200 - total flux cleaned = 0.0957559 Jy ! Total flux subtracted in 200 components = 0.0957559 Jy ! Clean residual min=-0.003201 max=0.007395 Jy/beam ! Clean residual mean=0.000027 rms=0.000898 Jy/beam ! Combined flux in latest and established models = 1.0137 Jy ! Adding 37 model components to the UV plane model. ! The established model now contains 44 components and 1.0137 Jy ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Added new window around map position (-3.4, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00833058 Jy ! Component: 100 - total flux cleaned = 0.0145175 Jy ! Component: 150 - total flux cleaned = 0.0193721 Jy ! Component: 200 - total flux cleaned = 0.0233914 Jy ! Total flux subtracted in 200 components = 0.0233914 Jy ! Clean residual min=-0.002393 max=0.002925 Jy/beam ! Clean residual mean=0.000009 rms=0.000574 Jy/beam ! Combined flux in latest and established models = 1.03709 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 64 components and 1.03709 Jy ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Added new window around map position (-0.8, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00356606 Jy ! Component: 100 - total flux cleaned = 0.0065743 Jy ! Component: 150 - total flux cleaned = 0.00903398 Jy ! Component: 200 - total flux cleaned = 0.0105894 Jy ! Total flux subtracted in 200 components = 0.0105894 Jy ! Clean residual min=-0.002195 max=0.002334 Jy/beam ! Clean residual mean=0.000003 rms=0.000503 Jy/beam ! Combined flux in latest and established models = 1.04768 Jy ! Adding 39 model components to the UV plane model. ! The established model now contains 82 components and 1.04768 Jy ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Added new window around map position (3.4, 7.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00200181 Jy ! Component: 100 - total flux cleaned = 0.00302062 Jy ! Component: 150 - total flux cleaned = 0.00373921 Jy ! Component: 200 - total flux cleaned = 0.00442177 Jy ! Total flux subtracted in 200 components = 0.00442177 Jy ! Clean residual min=-0.002082 max=0.002031 Jy/beam ! Clean residual mean=0.000001 rms=0.000477 Jy/beam ! Combined flux in latest and established models = 1.0521 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 104 components and 1.0521 Jy ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Estimated beam: bmin=2.064 mas, bmaj=2.89 mas, bpa=75.05 degrees ! Estimated noise=0.772357 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251453 Jy ! Component: 100 - total flux cleaned = 0.00403021 Jy ! Component: 150 - total flux cleaned = 0.0053305 Jy ! Component: 200 - total flux cleaned = 0.00648664 Jy ! Total flux subtracted in 200 components = 0.00648664 Jy ! Clean residual min=-0.001995 max=0.001795 Jy/beam ! Clean residual mean=-0.000006 rms=0.000498 Jy/beam ! Combined flux in latest and established models = 1.05859 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000962338 Jy ! Component: 100 - total flux cleaned = 0.00152999 Jy ! Component: 150 - total flux cleaned = 0.00181334 Jy ! Component: 200 - total flux cleaned = 0.00207723 Jy ! Total flux subtracted in 200 components = 0.00207723 Jy ! Clean residual min=-0.001856 max=0.001721 Jy/beam ! Clean residual mean=-0.000007 rms=0.000482 Jy/beam ! Combined flux in latest and established models = 1.06066 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 167 components and 1.06066 Jy ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! Estimated beam: bmin=0.7886 mas, bmaj=1.352 mas, bpa=64.93 degrees ! Estimated noise=0.561804 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000374081 Jy ! Component: 100 - total flux cleaned = -0.000688093 Jy ! Component: 150 - total flux cleaned = -0.000806244 Jy ! Component: 200 - total flux cleaned = -0.00103315 Jy ! Total flux subtracted in 200 components = -0.00103315 Jy ! Clean residual min=-0.001940 max=0.001980 Jy/beam ! Clean residual mean=-0.000003 rms=0.000447 Jy/beam ! Combined flux in latest and established models = 1.05963 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 182 components and 1.05963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060292Jy sigma=0.787430 ! Fit after self-cal, rms=0.060124Jy sigma=0.783832 wmodel J1044+8054_X_map.mod ! Writing 182 model components to file: J1044+8054_X_map.mod wobs J1044+8054_X_uvs.fits ! Writing UV FITS file: J1044+8054_X_uvs.fits wwins J1044+8054_X_map.win ! wwins: Wrote 13 windows to J1044+8054_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000146849 Jy ! Component: 100 - total flux cleaned = -1.2318e-05 Jy ! Component: 150 - total flux cleaned = -7.64052e-05 Jy ! Component: 200 - total flux cleaned = -7.63256e-05 Jy ! Component: 250 - total flux cleaned = -1.37954e-05 Jy ! Component: 300 - total flux cleaned = -1.36232e-05 Jy ! Component: 350 - total flux cleaned = -0.000104032 Jy ! Component: 400 - total flux cleaned = -0.000163612 Jy ! Component: 450 - total flux cleaned = -0.000105002 Jy ! Component: 500 - total flux cleaned = -0.000134694 Jy ! Component: 550 - total flux cleaned = -0.000163367 Jy ! Component: 600 - total flux cleaned = -4.88023e-05 Jy ! Component: 650 - total flux cleaned = 9.30174e-05 Jy ! Component: 700 - total flux cleaned = 3.61659e-05 Jy ! Component: 750 - total flux cleaned = 9.25138e-05 Jy ! Component: 800 - total flux cleaned = 0.000203205 Jy ! Component: 850 - total flux cleaned = 0.000203578 Jy ! Component: 900 - total flux cleaned = 0.00031266 Jy ! Component: 950 - total flux cleaned = 0.000285493 Jy ! Component: 1000 - total flux cleaned = 0.000285517 Jy ! Component: 1050 - total flux cleaned = 0.000392456 Jy ! Component: 1100 - total flux cleaned = 0.000313009 Jy ! Component: 1150 - total flux cleaned = 0.000418746 Jy ! Component: 1200 - total flux cleaned = 0.0003926 Jy ! Component: 1250 - total flux cleaned = 0.000523212 Jy ! Component: 1300 - total flux cleaned = 0.000522959 Jy ! Component: 1350 - total flux cleaned = 0.000574553 Jy ! Component: 1400 - total flux cleaned = 0.000703123 Jy ! Component: 1450 - total flux cleaned = 0.00072853 Jy ! Component: 1500 - total flux cleaned = 0.000550499 Jy ! Component: 1550 - total flux cleaned = 0.000753047 Jy ! Component: 1600 - total flux cleaned = 0.000803341 Jy ! Component: 1650 - total flux cleaned = 0.000753322 Jy ! Component: 1700 - total flux cleaned = 0.000828166 Jy ! Component: 1750 - total flux cleaned = 0.000803282 Jy ! Component: 1800 - total flux cleaned = 0.000852701 Jy ! Component: 1850 - total flux cleaned = 0.000877347 Jy ! Component: 1900 - total flux cleaned = 0.000999856 Jy ! Component: 1950 - total flux cleaned = 0.000975481 Jy ! Component: 2000 - total flux cleaned = 0.00102418 Jy ! Component: 2050 - total flux cleaned = 0.000927382 Jy ! Component: 2100 - total flux cleaned = 0.000999661 Jy ! Component: 2150 - total flux cleaned = 0.00109553 Jy ! Component: 2200 - total flux cleaned = 0.00102373 Jy ! Component: 2250 - total flux cleaned = 0.00107142 Jy ! Component: 2300 - total flux cleaned = 0.0010477 Jy ! Component: 2350 - total flux cleaned = 0.00092934 Jy ! Component: 2400 - total flux cleaned = 0.000952996 Jy ! Component: 2450 - total flux cleaned = 0.00104689 Jy ! Component: 2500 - total flux cleaned = 0.000976667 Jy ! Component: 2550 - total flux cleaned = 0.00109326 Jy ! Component: 2600 - total flux cleaned = 0.00107003 Jy ! Component: 2650 - total flux cleaned = 0.00109316 Jy ! Component: 2700 - total flux cleaned = 0.0012544 Jy ! Component: 2750 - total flux cleaned = 0.00118527 Jy ! Component: 2800 - total flux cleaned = 0.00113942 Jy ! Component: 2850 - total flux cleaned = 0.00111662 Jy ! Component: 2900 - total flux cleaned = 0.00113938 Jy ! Component: 2950 - total flux cleaned = 0.0011394 Jy ! Component: 3000 - total flux cleaned = 0.00120716 Jy ! Component: 3050 - total flux cleaned = 0.00116206 Jy ! Component: 3100 - total flux cleaned = 0.00116203 Jy ! Component: 3150 - total flux cleaned = 0.00109494 Jy ! Component: 3200 - total flux cleaned = 0.00116172 Jy ! Component: 3250 - total flux cleaned = 0.00118387 Jy ! Component: 3300 - total flux cleaned = 0.00120609 Jy ! Component: 3350 - total flux cleaned = 0.00120603 Jy ! Component: 3400 - total flux cleaned = 0.00114005 Jy ! Component: 3450 - total flux cleaned = 0.0010962 Jy ! Component: 3500 - total flux cleaned = 0.00107439 Jy ! Component: 3550 - total flux cleaned = 0.00116159 Jy ! Component: 3600 - total flux cleaned = 0.00100958 Jy ! Component: 3650 - total flux cleaned = 0.0011395 Jy ! Component: 3700 - total flux cleaned = 0.00118267 Jy ! Component: 3750 - total flux cleaned = 0.000967322 Jy ! Component: 3800 - total flux cleaned = 0.0010532 Jy ! Component: 3850 - total flux cleaned = 0.00107457 Jy ! Component: 3900 - total flux cleaned = 0.00113867 Jy ! Component: 3950 - total flux cleaned = 0.00107488 Jy ! Component: 4000 - total flux cleaned = 0.00109616 Jy ! Component: 4050 - total flux cleaned = 0.00118084 Jy ! Total flux subtracted in 4096 components = 0.00109638 Jy ! Clean residual min=-0.001177 max=0.001366 Jy/beam ! Clean residual mean=-0.000003 rms=0.000354 Jy/beam ! Combined flux in latest and established models = 1.06073 Jy keep ! Adding 333 model components to the UV plane model. ! The established model now contains 513 components and 1.06073 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv125_uvs/J1044+8054_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.7886 x 1.352 at 64.93 degrees (North through East) ! Clean map min=-0.0015086 max=0.7797 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv125_uvs/J1044+8054_X_map.fits wmodel /scr/pima/rv125_uvs/J1044+8054_X_map.mod ! Writing 513 model components to file: /scr/pima/rv125_uvs/J1044+8054_X_map.mod wobs /scr/pima/rv125_uvs/J1044+8054_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv125_uvs/J1044+8054_X_uvs.fits wwins /scr/pima/rv125_uvs/J1044+8054_X_map.win ! wwins: Wrote 14 windows to /scr/pima/rv125_uvs/J1044+8054_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.779703 invert ! Inverting map ! Your choice of large map pixels excluded 0.111% of the data. ! The y-axis pixel size should ideally be below 0.1723 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000353931 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.136179 0.136179 0.272359 0.544717 1.08943 2.17887 4.35774 8.71548 17.431 34.8619 69.7238 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.779 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2202.98 quit ! Quitting program ! Log file /scr/pima/rv125_uvs/J1044+8054_X_dfm.log closed on Sun Dec 23 02:50:51 2018