! Started logfile: /scr/pima/rv125_uvs/J0850-1213_X_dfm.log on Sun Dec 23 02:50:09 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv125_uvs/J0850-1213_X_uva.fits ! Reading UV FITS file: /scr/pima/rv125_uvs/J0850-1213_X_uva.fits ! AN table 1: 10 integrations on 36 of 36 possible baselines. ! AN table 2: 40 integrations on 6 of 6 possible baselines. ! AN table 3: 12 integrations on 10 of 10 possible baselines. ! AN table 4: 4 integrations on 21 of 21 possible baselines. ! AN table 5: 14 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.616972 visibilities/baseline/integration-bin. ! Found source: J0850-1213 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 3228 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0850-1213_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 38 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 38 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 38 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 38 telescope corrections were flagged in sub-array 1. ! A total of 102 telescope corrections were flagged in sub-array 2. ! A total of 22 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 39 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.220860Jy sigma=17.677549 ! Fit after self-cal, rms=0.372125Jy sigma=5.016139 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.95% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Estimated beam: bmin=0.6578 mas, bmaj=1.053 mas, bpa=4.436 degrees ! Estimated noise=1.37917 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.530432 Jy ! Component: 100 - total flux cleaned = 0.65709 Jy ! Total flux subtracted in 100 components = 0.65709 Jy ! Clean residual min=-0.026455 max=0.047694 Jy/beam ! Clean residual mean=0.000027 rms=0.004991 Jy/beam ! Combined flux in latest and established models = 0.65709 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 0.65709 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168772Jy sigma=2.173281 ! Fit after self-cal, rms=0.168766Jy sigma=2.173228 ! Inverting map ! Your choice of large map pixels excluded 1.95% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0489649 Jy ! Component: 100 - total flux cleaned = 0.0716568 Jy ! Total flux subtracted in 100 components = 0.0716568 Jy ! Clean residual min=-0.026973 max=0.028507 Jy/beam ! Clean residual mean=0.000004 rms=0.004396 Jy/beam ! Combined flux in latest and established models = 0.728747 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 9 components and 0.728747 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160014Jy sigma=2.012357 ! Fit after self-cal, rms=0.159966Jy sigma=2.012004 ! Inverting map ! Your choice of large map pixels excluded 1.95% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Added new window around map position (1.2, 9). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0178248 Jy ! Component: 100 - total flux cleaned = 0.0211734 Jy ! Total flux subtracted in 100 components = 0.0211734 Jy ! Clean residual min=-0.026731 max=0.029013 Jy/beam ! Clean residual mean=0.000006 rms=0.004267 Jy/beam ! Combined flux in latest and established models = 0.74992 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 15 components and 0.74992 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157124Jy sigma=1.974179 ! Fit after self-cal, rms=0.156966Jy sigma=1.970781 ! Inverting map ! Your choice of large map pixels excluded 1.95% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Added new window around map position (3.2, 11.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.01003 Jy ! Component: 100 - total flux cleaned = 0.015552 Jy ! Total flux subtracted in 100 components = 0.015552 Jy ! Clean residual min=-0.025023 max=0.024286 Jy/beam ! Clean residual mean=0.000010 rms=0.004074 Jy/beam ! Combined flux in latest and established models = 0.765472 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 19 components and 0.765472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153356Jy sigma=1.922905 ! Fit after self-cal, rms=0.153162Jy sigma=1.919716 ! Inverting map ! Your choice of large map pixels excluded 1.95% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 1.95% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Estimated beam: bmin=0.8212 mas, bmaj=1.325 mas, bpa=0.01669 degrees ! Estimated noise=1.03653 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00130292 Jy ! Component: 100 - total flux cleaned = 0.00299085 Jy ! Component: 150 - total flux cleaned = 0.00395687 Jy ! Component: 200 - total flux cleaned = 0.00424404 Jy ! Total flux subtracted in 200 components = 0.00424404 Jy ! Clean residual min=-0.026245 max=0.024180 Jy/beam ! Clean residual mean=0.000073 rms=0.005872 Jy/beam ! Combined flux in latest and established models = 0.769716 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 26 components and 0.769717 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150817Jy sigma=1.895861 ! Fit after self-cal, rms=0.150736Jy sigma=1.894572 ! Inverting map ! Your choice of large map pixels excluded 1.95% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8212 x 1.325 at 0.01669 degrees (North through East) ! Clean map min=-0.024225 max=0.67973 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 HN 0.99 KP 0.98 LA 0.97 ! MK 0.86 NL 1.00 OV 0.93 PT 0.84 ! SC 0.97 ! ! A total of 42 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.77 MC 0.91 SC 1.08 WN 1.47 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.79 HN 1.32 NL 1.35 SC 0.92 ! WN 1.36 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.07 KP 1.07 LA 1.01 MC 0.99 ! NL 1.04 PT 0.85 SC 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 HH 0.93 HN 1.00 KP 1.01 ! LA 1.02 NL 1.07 OV 1.00 PT 0.86 ! SC 0.99 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 HN 0.99 KP 0.98 LA 0.99 ! MK 0.88 NL 1.01 OV 0.92 PT 0.85 ! SC 0.97 ! ! A total of 42 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.88 MC 0.98 SC 1.11 WN 1.49 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.79 HN 1.34 NL 1.41 SC 0.95 ! WN 1.47 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.01 KP 1.03 LA 1.00 MC 1.04 ! NL 1.07 PT 0.87 SC 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 HH 1.00 HN 0.98 KP 0.99 ! LA 1.02 NL 1.08 OV 0.99 PT 0.89 ! SC 1.01 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 1.00 KP 1.00 LA 0.97 ! MK 0.87 NL 1.02 OV 0.94 PT 0.88 ! SC 0.97 ! ! A total of 42 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.70 MC 1.35 SC 1.22 WN 1.54 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.77 HN 1.36 NL 1.42 SC 0.92 ! WN 1.65 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.02 KP 1.06 LA 1.06 MC 1.54 ! NL 1.07 PT 0.85 SC 0.93 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 HH 1.01 HN 0.99 KP 1.01 ! LA 1.03 NL 1.08 OV 0.98 PT 0.85 ! SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 HN 1.00 KP 0.99 LA 1.00 ! MK 0.87 NL 1.04 OV 0.94 PT 0.88 ! SC 1.00 ! ! A total of 42 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.79 MC 1.26 SC 1.12 WN 1.43 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.89 HN 1.37 NL 1.40 SC 0.94 ! WN 1.34 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! HN 1.04 KP 1.09 LA 1.04 MC 1.48 ! NL 1.07 PT 0.81 SC 0.97 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.07 HH 1.28 HN 1.01 KP 1.00 ! LA 1.04 NL 1.10 OV 0.99 PT 0.84 ! SC 0.98 ! ! ! Fit before self-cal, rms=0.150736Jy sigma=1.894572 ! Fit after self-cal, rms=0.086842Jy sigma=1.022412 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Estimated beam: bmin=0.8435 mas, bmaj=1.676 mas, bpa=0.3619 degrees ! Estimated noise=1.05759 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0152844 Jy ! Component: 100 - total flux cleaned = -0.0207487 Jy ! Component: 150 - total flux cleaned = -0.0223467 Jy ! Component: 200 - total flux cleaned = -0.0235972 Jy ! Total flux subtracted in 200 components = -0.0235972 Jy ! Clean residual min=-0.006274 max=0.007719 Jy/beam ! Clean residual mean=-0.000006 rms=0.001440 Jy/beam ! Combined flux in latest and established models = 0.746119 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 33 components and 0.746119 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.084109Jy sigma=0.969041 ! Fit after self-cal, rms=0.084240Jy sigma=0.963401 ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Added new window around map position (-3.4, 12.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00291831 Jy ! Component: 100 - total flux cleaned = 0.00206021 Jy ! Component: 150 - total flux cleaned = 0.00232047 Jy ! Component: 200 - total flux cleaned = 0.00268551 Jy ! Total flux subtracted in 200 components = 0.00268551 Jy ! Clean residual min=-0.005882 max=0.006963 Jy/beam ! Clean residual mean=-0.000006 rms=0.001307 Jy/beam ! Combined flux in latest and established models = 0.748805 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 51 components and 0.748805 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083528Jy sigma=0.950774 ! Fit after self-cal, rms=0.083480Jy sigma=0.950219 ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Added new window around map position (-1.2, -8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00665022 Jy ! Component: 100 - total flux cleaned = 0.00920031 Jy ! Component: 150 - total flux cleaned = 0.0102645 Jy ! Component: 200 - total flux cleaned = 0.0105847 Jy ! Total flux subtracted in 200 components = 0.0105847 Jy ! Clean residual min=-0.005187 max=0.005786 Jy/beam ! Clean residual mean=-0.000005 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 0.759389 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 61 components and 0.759389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082817Jy sigma=0.939096 ! Fit after self-cal, rms=0.082773Jy sigma=0.938003 ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.082773Jy sigma=0.938003 ! Fit after self-cal, rms=0.080833Jy sigma=0.905187 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Estimated beam: bmin=0.8431 mas, bmaj=1.677 mas, bpa=0.3209 degrees ! Estimated noise=1.05593 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00240218 Jy ! Component: 100 - total flux cleaned = -0.00276518 Jy ! Component: 150 - total flux cleaned = -0.00297641 Jy ! Component: 200 - total flux cleaned = -0.00316539 Jy ! Total flux subtracted in 200 components = -0.00316539 Jy ! Clean residual min=-0.004582 max=0.004509 Jy/beam ! Clean residual mean=0.000000 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 0.756224 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 70 components and 0.756224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080391Jy sigma=0.897122 ! Fit after self-cal, rms=0.080353Jy sigma=0.896658 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000130189 Jy ! Component: 100 - total flux cleaned = 0.000123242 Jy ! Component: 150 - total flux cleaned = 0.000201829 Jy ! Component: 200 - total flux cleaned = 0.000276917 Jy ! Total flux subtracted in 200 components = 0.000276917 Jy ! Clean residual min=-0.004385 max=0.004272 Jy/beam ! Clean residual mean=-0.000000 rms=0.000988 Jy/beam ! Combined flux in latest and established models = 0.756501 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 79 components and 0.756501 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080157Jy sigma=0.893954 ! Fit after self-cal, rms=0.080141Jy sigma=0.893882 ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.080141Jy sigma=0.893882 ! Fit after self-cal, rms=0.079815Jy sigma=0.883906 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Estimated beam: bmin=0.8429 mas, bmaj=1.677 mas, bpa=0.3182 degrees ! Estimated noise=1.05626 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00180617 Jy ! Component: 100 - total flux cleaned = -0.00205651 Jy ! Component: 150 - total flux cleaned = -0.00213222 Jy ! Component: 200 - total flux cleaned = -0.00227646 Jy ! Total flux subtracted in 200 components = -0.00227646 Jy ! Clean residual min=-0.003825 max=0.003925 Jy/beam ! Clean residual mean=0.000006 rms=0.000923 Jy/beam ! Combined flux in latest and established models = 0.754225 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 82 components and 0.754224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079628Jy sigma=0.881139 ! Fit after self-cal, rms=0.079612Jy sigma=0.881044 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00341846 Jy ! Component: 100 - total flux cleaned = 0.00350268 Jy ! Component: 150 - total flux cleaned = 0.00307656 Jy ! Component: 200 - total flux cleaned = 0.00281722 Jy ! Total flux subtracted in 200 components = 0.00281722 Jy ! Clean residual min=-0.003746 max=0.003477 Jy/beam ! Clean residual mean=0.000004 rms=0.000883 Jy/beam ! Combined flux in latest and established models = 0.757042 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 94 components and 0.757042 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079316Jy sigma=0.877763 ! Fit after self-cal, rms=0.079287Jy sigma=0.877489 ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079287Jy sigma=0.877489 ! Fit after self-cal, rms=0.079283Jy sigma=0.876810 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Estimated beam: bmin=2.234 mas, bmaj=3.698 mas, bpa=-9.915 degrees ! Estimated noise=1.2919 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000186371 Jy ! Component: 100 - total flux cleaned = -0.000422625 Jy ! Component: 150 - total flux cleaned = -0.000938868 Jy ! Component: 200 - total flux cleaned = -0.00139456 Jy ! Total flux subtracted in 200 components = -0.00139456 Jy ! Clean residual min=-0.003472 max=0.003819 Jy/beam ! Clean residual mean=0.000007 rms=0.000950 Jy/beam ! Combined flux in latest and established models = 0.755647 Jy selfcal ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 116 components and 0.755647 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079259Jy sigma=0.876003 ! Fit after self-cal, rms=0.079247Jy sigma=0.875850 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000153403 Jy ! Component: 100 - total flux cleaned = 1.04913e-05 Jy ! Component: 150 - total flux cleaned = -0.000217386 Jy ! Component: 200 - total flux cleaned = -0.000369572 Jy ! Total flux subtracted in 200 components = -0.000369572 Jy ! Clean residual min=-0.003426 max=0.003756 Jy/beam ! Clean residual mean=0.000007 rms=0.000943 Jy/beam ! Combined flux in latest and established models = 0.755277 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 124 components and 0.755277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079255Jy sigma=0.875877 ! Fit after self-cal, rms=0.079248Jy sigma=0.875827 ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Estimated beam: bmin=0.8429 mas, bmaj=1.676 mas, bpa=0.3685 degrees ! Estimated noise=1.05648 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8429 x 1.676 at 0.3685 degrees (North through East) ! Clean map min=-0.0042177 max=0.68588 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.079248Jy sigma=0.875827 ! Fit after self-cal, rms=0.073672Jy sigma=0.804755 ! Inverting map and beam ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Estimated beam: bmin=0.8428 mas, bmaj=1.678 mas, bpa=0.3077 degrees ! Estimated noise=1.05698 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000686479 Jy ! Component: 100 - total flux cleaned = -0.000896716 Jy ! Component: 150 - total flux cleaned = -0.000894677 Jy ! Component: 200 - total flux cleaned = -0.000896059 Jy ! Total flux subtracted in 200 components = -0.000896059 Jy ! Clean residual min=-0.003703 max=0.003529 Jy/beam ! Clean residual mean=0.000004 rms=0.000844 Jy/beam ! Combined flux in latest and established models = 0.754381 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 135 components and 0.754381 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073501Jy sigma=0.803043 ! Fit after self-cal, rms=0.073495Jy sigma=0.802997 ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000130165 Jy ! Component: 100 - total flux cleaned = 0.0001856 Jy ! Component: 150 - total flux cleaned = 0.000186294 Jy ! Component: 200 - total flux cleaned = 0.000237288 Jy ! Total flux subtracted in 200 components = 0.000237288 Jy ! Clean residual min=-0.003640 max=0.003529 Jy/beam ! Clean residual mean=0.000003 rms=0.000840 Jy/beam ! Combined flux in latest and established models = 0.754619 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 139 components and 0.754619 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073375Jy sigma=0.801885 ! Fit after self-cal, rms=0.073372Jy sigma=0.801855 ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073372Jy sigma=0.801855 ! Fit after self-cal, rms=0.073356Jy sigma=0.801629 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Estimated beam: bmin=0.6638 mas, bmaj=1.376 mas, bpa=2.893 degrees ! Estimated noise=1.37077 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.530176 Jy ! Component: 100 - total flux cleaned = 0.650861 Jy ! Component: 150 - total flux cleaned = 0.694235 Jy ! Component: 200 - total flux cleaned = 0.713275 Jy ! Total flux subtracted in 200 components = 0.713275 Jy ! Clean residual min=-0.005876 max=0.008291 Jy/beam ! Clean residual mean=0.000002 rms=0.001327 Jy/beam ! Combined flux in latest and established models = 0.713275 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 0.713275 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Estimated beam: bmin=0.8427 mas, bmaj=1.678 mas, bpa=0.3314 degrees ! Estimated noise=1.05744 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00963816 Jy ! Component: 100 - total flux cleaned = 0.0161721 Jy ! Component: 150 - total flux cleaned = 0.0216517 Jy ! Component: 200 - total flux cleaned = 0.0263518 Jy ! Total flux subtracted in 200 components = 0.0263518 Jy ! Clean residual min=-0.004268 max=0.004609 Jy/beam ! Clean residual mean=0.000003 rms=0.000981 Jy/beam ! Combined flux in latest and established models = 0.739626 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 31 components and 0.739626 Jy ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Added new window around map position (-8.6, -41.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00453518 Jy ! Component: 100 - total flux cleaned = 0.00768119 Jy ! Component: 150 - total flux cleaned = 0.00960146 Jy ! Component: 200 - total flux cleaned = 0.0106573 Jy ! Total flux subtracted in 200 components = 0.0106573 Jy ! Clean residual min=-0.003728 max=0.003604 Jy/beam ! Clean residual mean=0.000003 rms=0.000902 Jy/beam ! Combined flux in latest and established models = 0.750284 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 43 components and 0.750284 Jy ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Estimated beam: bmin=2.234 mas, bmaj=3.696 mas, bpa=-9.912 degrees ! Estimated noise=1.29277 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00313109 Jy ! Component: 100 - total flux cleaned = 0.0037383 Jy ! Component: 150 - total flux cleaned = 0.00396029 Jy ! Component: 200 - total flux cleaned = 0.00402154 Jy ! Total flux subtracted in 200 components = 0.00402154 Jy ! Clean residual min=-0.003130 max=0.003725 Jy/beam ! Clean residual mean=0.000007 rms=0.000937 Jy/beam ! Combined flux in latest and established models = 0.754305 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00010565 Jy ! Component: 100 - total flux cleaned = 0.000251454 Jy ! Component: 150 - total flux cleaned = 0.000340247 Jy ! Component: 200 - total flux cleaned = 0.000383248 Jy ! Total flux subtracted in 200 components = 0.000383248 Jy ! Clean residual min=-0.003075 max=0.003684 Jy/beam ! Clean residual mean=0.000007 rms=0.000927 Jy/beam ! Combined flux in latest and established models = 0.754688 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 86 components and 0.754689 Jy ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! Estimated beam: bmin=0.8427 mas, bmaj=1.678 mas, bpa=0.3314 degrees ! Estimated noise=1.05744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000167603 Jy ! Component: 100 - total flux cleaned = 0.00011705 Jy ! Component: 150 - total flux cleaned = 0.000464849 Jy ! Component: 200 - total flux cleaned = 0.000629524 Jy ! Total flux subtracted in 200 components = 0.000629524 Jy ! Clean residual min=-0.003533 max=0.003629 Jy/beam ! Clean residual mean=0.000003 rms=0.000854 Jy/beam ! Combined flux in latest and established models = 0.755318 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 102 components and 0.755318 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.073469Jy sigma=0.804019 ! Fit after self-cal, rms=0.073256Jy sigma=0.802658 wmodel J0850-1213_X_map.mod ! Writing 102 model components to file: J0850-1213_X_map.mod wobs J0850-1213_X_uvs.fits ! Writing UV FITS file: J0850-1213_X_uvs.fits wwins J0850-1213_X_map.win ! wwins: Wrote 7 windows to J0850-1213_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000403882 Jy ! Component: 100 - total flux cleaned = 0.000340429 Jy ! Component: 150 - total flux cleaned = 0.000340543 Jy ! Component: 200 - total flux cleaned = 0.000400313 Jy ! Component: 250 - total flux cleaned = 0.000460011 Jy ! Component: 300 - total flux cleaned = 0.000745325 Jy ! Component: 350 - total flux cleaned = 0.000634202 Jy ! Component: 400 - total flux cleaned = 0.00057998 Jy ! Component: 450 - total flux cleaned = 0.000418151 Jy ! Component: 500 - total flux cleaned = 0.000259076 Jy ! Component: 550 - total flux cleaned = 0.000259201 Jy ! Component: 600 - total flux cleaned = 5.23632e-05 Jy ! Component: 650 - total flux cleaned = 5.26111e-05 Jy ! Component: 700 - total flux cleaned = -9.91187e-05 Jy ! Component: 750 - total flux cleaned = -0.000249578 Jy ! Component: 800 - total flux cleaned = -0.000298836 Jy ! Component: 850 - total flux cleaned = -0.000348389 Jy ! Component: 900 - total flux cleaned = -0.000446381 Jy ! Component: 950 - total flux cleaned = -0.000591941 Jy ! Component: 1000 - total flux cleaned = -0.000688256 Jy ! Component: 1050 - total flux cleaned = -0.000878305 Jy ! Component: 1100 - total flux cleaned = -0.00116138 Jy ! Component: 1150 - total flux cleaned = -0.00130158 Jy ! Component: 1200 - total flux cleaned = -0.00134775 Jy ! Component: 1250 - total flux cleaned = -0.00157755 Jy ! Component: 1300 - total flux cleaned = -0.00176012 Jy ! Component: 1350 - total flux cleaned = -0.00175987 Jy ! Component: 1400 - total flux cleaned = -0.00216462 Jy ! Component: 1450 - total flux cleaned = -0.00225377 Jy ! Component: 1500 - total flux cleaned = -0.0023422 Jy ! Component: 1550 - total flux cleaned = -0.00256191 Jy ! Component: 1600 - total flux cleaned = -0.00264923 Jy ! Component: 1650 - total flux cleaned = -0.00269311 Jy ! Component: 1700 - total flux cleaned = -0.00299486 Jy ! Component: 1750 - total flux cleaned = -0.002909 Jy ! Component: 1800 - total flux cleaned = -0.00316401 Jy ! Component: 1850 - total flux cleaned = -0.00333299 Jy ! Component: 1900 - total flux cleaned = -0.00337492 Jy ! Component: 1950 - total flux cleaned = -0.0035831 Jy ! Component: 2000 - total flux cleaned = -0.00354197 Jy ! Component: 2050 - total flux cleaned = -0.00370604 Jy ! Component: 2100 - total flux cleaned = -0.00374646 Jy ! Component: 2150 - total flux cleaned = -0.0039489 Jy ! Component: 2200 - total flux cleaned = -0.00402904 Jy ! Component: 2250 - total flux cleaned = -0.00402911 Jy ! Component: 2300 - total flux cleaned = -0.00402879 Jy ! Component: 2350 - total flux cleaned = -0.00410778 Jy ! Component: 2400 - total flux cleaned = -0.00395075 Jy ! Component: 2450 - total flux cleaned = -0.00418553 Jy ! Component: 2500 - total flux cleaned = -0.00414666 Jy ! Component: 2550 - total flux cleaned = -0.0040314 Jy ! Component: 2600 - total flux cleaned = -0.00414622 Jy ! Component: 2650 - total flux cleaned = -0.00410832 Jy ! Component: 2700 - total flux cleaned = -0.00410828 Jy ! Component: 2750 - total flux cleaned = -0.00403298 Jy ! Component: 2800 - total flux cleaned = -0.00407061 Jy ! Component: 2850 - total flux cleaned = -0.00410816 Jy ! Component: 2900 - total flux cleaned = -0.00403397 Jy ! Component: 2950 - total flux cleaned = -0.00414497 Jy ! Component: 3000 - total flux cleaned = -0.00410825 Jy ! Component: 3050 - total flux cleaned = -0.00410808 Jy ! Component: 3100 - total flux cleaned = -0.00410801 Jy ! Component: 3150 - total flux cleaned = -0.00410812 Jy ! Component: 3200 - total flux cleaned = -0.00396386 Jy ! Component: 3250 - total flux cleaned = -0.00396407 Jy ! Component: 3300 - total flux cleaned = -0.0038928 Jy ! Component: 3350 - total flux cleaned = -0.00407064 Jy ! Component: 3400 - total flux cleaned = -0.00396419 Jy ! Component: 3450 - total flux cleaned = -0.00389378 Jy ! Component: 3500 - total flux cleaned = -0.00389385 Jy ! Component: 3550 - total flux cleaned = -0.00378924 Jy ! Component: 3600 - total flux cleaned = -0.00368492 Jy ! Component: 3650 - total flux cleaned = -0.00385764 Jy ! Component: 3700 - total flux cleaned = -0.00365115 Jy ! Component: 3750 - total flux cleaned = -0.00365132 Jy ! Component: 3800 - total flux cleaned = -0.00371947 Jy ! Component: 3850 - total flux cleaned = -0.00371964 Jy ! Component: 3900 - total flux cleaned = -0.00365192 Jy ! Component: 3950 - total flux cleaned = -0.00348368 Jy ! Component: 4000 - total flux cleaned = -0.00358408 Jy ! Component: 4050 - total flux cleaned = -0.00355077 Jy ! Total flux subtracted in 4096 components = -0.00348434 Jy ! Clean residual min=-0.001756 max=0.002198 Jy/beam ! Clean residual mean=0.000002 rms=0.000559 Jy/beam ! Combined flux in latest and established models = 0.751834 Jy keep ! Adding 308 model components to the UV plane model. ! The established model now contains 410 components and 0.751834 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv125_uvs/J0850-1213_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8427 x 1.678 at 0.3314 degrees (North through East) ! Clean map min=-0.0029552 max=0.68369 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv125_uvs/J0850-1213_X_map.fits wmodel /scr/pima/rv125_uvs/J0850-1213_X_map.mod ! Writing 410 model components to file: /scr/pima/rv125_uvs/J0850-1213_X_map.mod wobs /scr/pima/rv125_uvs/J0850-1213_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv125_uvs/J0850-1213_X_uvs.fits wwins /scr/pima/rv125_uvs/J0850-1213_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rv125_uvs/J0850-1213_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.683695 invert ! Inverting map ! Your choice of large map pixels excluded 2.19% of the data. ! The x-axis pixel size should ideally be below 0.1685 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000556154 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.244036 0.244036 0.488072 0.976144 1.95229 3.90458 7.80915 15.6183 31.2366 62.4732 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0016 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.683 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1229.33 quit ! Quitting program ! Log file /scr/pima/rv125_uvs/J0850-1213_X_dfm.log closed on Sun Dec 23 02:50:14 2018