! Started logfile: /scr/pima/rv125_uvs/J0730-1141_X_dfm.log on Sun Dec 23 02:49:47 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv125_uvs/J0730-1141_X_uva.fits ! Reading UV FITS file: /scr/pima/rv125_uvs/J0730-1141_X_uva.fits ! AN table 1: 59 integrations on 10 of 10 possible baselines. ! AN table 2: 8 integrations on 21 of 21 possible baselines. ! AN table 3: 15 integrations on 36 of 36 possible baselines. ! AN table 4: 23 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.412512 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0730-1141 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 3508 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0730-1141_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 211 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 87 telescope corrections were flagged in sub-array 3. ! A total of 101 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 2. ! A total of 211 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 87 telescope corrections were flagged in sub-array 3. ! A total of 101 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 3. ! A total of 211 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 87 telescope corrections were flagged in sub-array 3. ! A total of 101 telescope corrections were flagged in sub-array 4. ! ! Correcting IF 4. ! A total of 211 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 87 telescope corrections were flagged in sub-array 3. ! A total of 101 telescope corrections were flagged in sub-array 4. ! ! Fit before self-cal, rms=4.997478Jy sigma=28.406313 ! Fit after self-cal, rms=4.018780Jy sigma=22.468823 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.84% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.5828 mas, bmaj=0.8492 mas, bpa=-0.8244 degrees ! Estimated noise=3.31825 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.478 Jy ! Component: 100 - total flux cleaned = 4.48369 Jy ! Total flux subtracted in 100 components = 4.48369 Jy ! Clean residual min=-0.287159 max=0.451968 Jy/beam ! Clean residual mean=0.000121 rms=0.048734 Jy/beam ! Combined flux in latest and established models = 4.48369 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 4.48369 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.321318Jy sigma=8.318232 ! Fit after self-cal, rms=1.320600Jy sigma=8.315565 ! Inverting map ! Your choice of large map pixels excluded 2.84% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.499433 Jy ! Component: 100 - total flux cleaned = 0.775654 Jy ! Total flux subtracted in 100 components = 0.775654 Jy ! Clean residual min=-0.257739 max=0.307062 Jy/beam ! Clean residual mean=0.000159 rms=0.042567 Jy/beam ! Combined flux in latest and established models = 5.25935 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 8 components and 5.25934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.099002Jy sigma=7.371658 ! Fit after self-cal, rms=1.098580Jy sigma=7.369921 ! Inverting map ! Your choice of large map pixels excluded 2.84% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (1.6, 4.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.189753 Jy ! Component: 100 - total flux cleaned = 0.233961 Jy ! Total flux subtracted in 100 components = 0.233961 Jy ! Clean residual min=-0.242462 max=0.304731 Jy/beam ! Clean residual mean=0.000163 rms=0.040399 Jy/beam ! Combined flux in latest and established models = 5.49331 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 14 components and 5.49331 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.048946Jy sigma=7.139647 ! Fit after self-cal, rms=1.045923Jy sigma=7.112065 ! Inverting map ! Your choice of large map pixels excluded 2.84% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (-1.6, -4.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.136711 Jy ! Component: 100 - total flux cleaned = 0.155376 Jy ! Total flux subtracted in 100 components = 0.155376 Jy ! Clean residual min=-0.221122 max=0.220583 Jy/beam ! Clean residual mean=0.000164 rms=0.038423 Jy/beam ! Combined flux in latest and established models = 5.64868 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 19 components and 5.64868 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.006839Jy sigma=6.908344 ! Fit after self-cal, rms=1.004894Jy sigma=6.901453 ! Inverting map ! Your choice of large map pixels excluded 2.84% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.84% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6567 mas, bmaj=1.047 mas, bpa=-2.446 degrees ! Estimated noise=2.60026 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0407219 Jy ! Component: 100 - total flux cleaned = -0.0442499 Jy ! Component: 150 - total flux cleaned = -0.0536337 Jy ! Component: 200 - total flux cleaned = -0.0591978 Jy ! Total flux subtracted in 200 components = -0.0591978 Jy ! Clean residual min=-0.260127 max=0.241321 Jy/beam ! Clean residual mean=0.001238 rms=0.052713 Jy/beam ! Combined flux in latest and established models = 5.58948 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 26 components and 5.58948 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.987628Jy sigma=6.760394 ! Fit after self-cal, rms=0.987128Jy sigma=6.758914 ! Inverting map ! Your choice of large map pixels excluded 2.84% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6567 x 1.047 at -2.446 degrees (North through East) ! Clean map min=-0.23557 max=4.4569 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.74 HN 1.74 MC 0.94 SC 0.90 ! WN 1.48 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.05 KP 1.09 LA 1.03 MC 0.64 ! NL 1.03 PT 0.92 SC 0.96 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.86 HN 0.99 KP 1.00 LA 1.00 ! NL 1.04 OV 0.97 PT 0.86 SC 0.96 ! WN 1.90 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.92 HN 0.98 KP 1.03 LA 1.00 ! MK 0.89 NL 1.02 OV 0.97 PT 0.84 ! SC 0.92 ! ! ! Correcting IF 2. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.80 HN 1.82 MC 1.00 SC 0.87 ! WN 1.48 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.02 KP 1.10 LA 1.06 MC 0.77 ! NL 1.06 PT 0.91 SC 0.96 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.87 HN 1.02 KP 0.99 LA 1.00 ! NL 1.05 OV 0.97 PT 0.86 SC 0.98 ! WN 1.94 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.94 HN 0.95 KP 1.04 LA 0.99 ! MK 0.88 NL 1.01 OV 0.96 PT 0.86 ! SC 0.94 ! ! ! Correcting IF 3. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.78 HN 1.86 MC 1.47 SC 0.86 ! WN 1.31 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.05 KP 1.07 LA 1.05 MC 1.02 ! NL 1.09 PT 0.86 SC 0.97 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.88 HN 0.96 KP 1.01 LA 1.03 ! NL 1.11 OV 0.99 PT 0.83 SC 0.98 ! WN 1.93 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.92 HN 1.01 KP 1.02 LA 1.00 ! MK 0.89 NL 1.04 OV 0.97 PT 0.86 ! SC 0.94 ! ! ! Correcting IF 4. ! A total of 66 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.91 HN 1.87 MC 1.34 SC 0.81 ! WN 1.29 ! ! Telescope amplitude corrections in sub-array 2: ! HN 1.01 KP 1.10 LA 1.06 MC 1.06 ! NL 1.08 PT 0.89 SC 0.98 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 1.04 HN 0.95 KP 1.01 LA 0.99 ! NL 1.08 OV 1.00 PT 0.83 SC 0.97 ! WN 1.89 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.96 HN 1.00 KP 1.05 LA 0.99 ! MK 0.90 NL 1.03 OV 0.98 PT 0.84 ! SC 0.94 ! ! ! Fit before self-cal, rms=0.987128Jy sigma=6.758914 ! Fit after self-cal, rms=0.340977Jy sigma=1.915485 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6675 mas, bmaj=1.433 mas, bpa=-1.85 degrees ! Estimated noise=2.82133 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.123275 Jy ! Component: 100 - total flux cleaned = -0.177307 Jy ! Component: 150 - total flux cleaned = -0.179075 Jy ! Component: 200 - total flux cleaned = -0.180423 Jy ! Total flux subtracted in 200 components = -0.180423 Jy ! Clean residual min=-0.042507 max=0.074411 Jy/beam ! Clean residual mean=0.000015 rms=0.009934 Jy/beam ! Combined flux in latest and established models = 5.40906 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 33 components and 5.40906 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.295653Jy sigma=1.634326 ! Fit after self-cal, rms=0.294929Jy sigma=1.629583 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (-0.6, 3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0488926 Jy ! Component: 100 - total flux cleaned = 0.0571077 Jy ! Component: 150 - total flux cleaned = 0.0612497 Jy ! Component: 200 - total flux cleaned = 0.0635804 Jy ! Total flux subtracted in 200 components = 0.0635804 Jy ! Clean residual min=-0.038011 max=0.053104 Jy/beam ! Clean residual mean=0.000002 rms=0.008513 Jy/beam ! Combined flux in latest and established models = 5.47264 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 46 components and 5.47264 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.274885Jy sigma=1.531383 ! Fit after self-cal, rms=0.273396Jy sigma=1.519681 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (-1.8, 1.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0492491 Jy ! Component: 100 - total flux cleaned = 0.0543339 Jy ! Component: 150 - total flux cleaned = 0.0532909 Jy ! Component: 200 - total flux cleaned = 0.0523285 Jy ! Total flux subtracted in 200 components = 0.0523285 Jy ! Clean residual min=-0.035370 max=0.041429 Jy/beam ! Clean residual mean=-0.000006 rms=0.007622 Jy/beam ! Combined flux in latest and established models = 5.52497 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 62 components and 5.52497 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.260359Jy sigma=1.460974 ! Fit after self-cal, rms=0.259211Jy sigma=1.453839 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (2, -14.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0148941 Jy ! Component: 100 - total flux cleaned = 0.0171314 Jy ! Component: 150 - total flux cleaned = 0.0181106 Jy ! Component: 200 - total flux cleaned = 0.0181047 Jy ! Total flux subtracted in 200 components = 0.0181047 Jy ! Clean residual min=-0.034943 max=0.036587 Jy/beam ! Clean residual mean=-0.000010 rms=0.007233 Jy/beam ! Combined flux in latest and established models = 5.54307 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 74 components and 5.54307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251075Jy sigma=1.392942 ! Fit after self-cal, rms=0.251114Jy sigma=1.389391 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.251114Jy sigma=1.389391 ! Fit after self-cal, rms=0.224704Jy sigma=1.153004 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6708 mas, bmaj=1.435 mas, bpa=-1.868 degrees ! Estimated noise=2.82371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0274341 Jy ! Component: 100 - total flux cleaned = -0.0333288 Jy ! Component: 150 - total flux cleaned = -0.0342177 Jy ! Component: 200 - total flux cleaned = -0.0325407 Jy ! Total flux subtracted in 200 components = -0.0325407 Jy ! Clean residual min=-0.023586 max=0.026635 Jy/beam ! Clean residual mean=0.000037 rms=0.005145 Jy/beam ! Combined flux in latest and established models = 5.51053 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 76 components and 5.51053 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214315Jy sigma=1.081980 ! Fit after self-cal, rms=0.214086Jy sigma=1.079676 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0.6, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103116 Jy ! Component: 100 - total flux cleaned = 0.0111731 Jy ! Component: 150 - total flux cleaned = 0.0111693 Jy ! Component: 200 - total flux cleaned = 0.011189 Jy ! Total flux subtracted in 200 components = 0.011189 Jy ! Clean residual min=-0.022322 max=0.025249 Jy/beam ! Clean residual mean=0.000035 rms=0.004915 Jy/beam ! Combined flux in latest and established models = 5.52172 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 5.52172 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.207789Jy sigma=1.040297 ! Fit after self-cal, rms=0.207535Jy sigma=1.038549 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (-1.8, 14.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0026811 Jy ! Component: 100 - total flux cleaned = 0.00506791 Jy ! Component: 150 - total flux cleaned = 0.00578765 Jy ! Component: 200 - total flux cleaned = 0.00579227 Jy ! Total flux subtracted in 200 components = 0.00579227 Jy ! Clean residual min=-0.021506 max=0.022366 Jy/beam ! Clean residual mean=0.000032 rms=0.004667 Jy/beam ! Combined flux in latest and established models = 5.52751 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 5.52751 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201627Jy sigma=0.996739 ! Fit after self-cal, rms=0.200940Jy sigma=0.994990 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (6.6, 41.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0143238 Jy ! Component: 100 - total flux cleaned = 0.0149287 Jy ! Component: 150 - total flux cleaned = 0.0160623 Jy ! Component: 200 - total flux cleaned = 0.0166078 Jy ! Total flux subtracted in 200 components = 0.0166078 Jy ! Clean residual min=-0.019811 max=0.019907 Jy/beam ! Clean residual mean=0.000032 rms=0.004511 Jy/beam ! Combined flux in latest and established models = 5.54412 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 101 components and 5.54412 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197342Jy sigma=0.969509 ! Fit after self-cal, rms=0.196962Jy sigma=0.968169 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.196962Jy sigma=0.968169 ! Fit after self-cal, rms=0.178828Jy sigma=0.856817 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6722 mas, bmaj=1.434 mas, bpa=-1.834 degrees ! Estimated noise=2.82384 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.015233 Jy ! Component: 100 - total flux cleaned = -0.0172389 Jy ! Component: 150 - total flux cleaned = -0.016683 Jy ! Component: 200 - total flux cleaned = -0.0151339 Jy ! Total flux subtracted in 200 components = -0.0151339 Jy ! Clean residual min=-0.018269 max=0.017487 Jy/beam ! Clean residual mean=0.000029 rms=0.003517 Jy/beam ! Combined flux in latest and established models = 5.52899 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 107 components and 5.52899 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174623Jy sigma=0.827293 ! Fit after self-cal, rms=0.174499Jy sigma=0.826481 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00159413 Jy ! Component: 100 - total flux cleaned = 0.00205487 Jy ! Component: 150 - total flux cleaned = 0.00205527 Jy ! Component: 200 - total flux cleaned = 0.00288396 Jy ! Total flux subtracted in 200 components = 0.00288396 Jy ! Clean residual min=-0.017293 max=0.016641 Jy/beam ! Clean residual mean=0.000028 rms=0.003423 Jy/beam ! Combined flux in latest and established models = 5.53187 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 109 components and 5.53187 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172189Jy sigma=0.812322 ! Fit after self-cal, rms=0.172075Jy sigma=0.811892 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172075Jy sigma=0.811892 ! Fit after self-cal, rms=0.169092Jy sigma=0.803773 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=2.149 mas, bmaj=3.577 mas, bpa=-5.629 degrees ! Estimated noise=3.86794 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00388967 Jy ! Component: 100 - total flux cleaned = 0.00513583 Jy ! Component: 150 - total flux cleaned = 0.00674302 Jy ! Component: 200 - total flux cleaned = 0.00769346 Jy ! Total flux subtracted in 200 components = 0.00769346 Jy ! Clean residual min=-0.016057 max=0.019901 Jy/beam ! Clean residual mean=0.000046 rms=0.004285 Jy/beam ! Combined flux in latest and established models = 5.53956 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 130 components and 5.53956 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168168Jy sigma=0.803048 ! Fit after self-cal, rms=0.168188Jy sigma=0.802395 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-8.8, 14.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0177594 Jy ! Component: 100 - total flux cleaned = 0.0191072 Jy ! Component: 150 - total flux cleaned = 0.0205622 Jy ! Component: 200 - total flux cleaned = 0.0233113 Jy ! Total flux subtracted in 200 components = 0.0233113 Jy ! Clean residual min=-0.014198 max=0.012871 Jy/beam ! Clean residual mean=0.000010 rms=0.003846 Jy/beam ! Combined flux in latest and established models = 5.56287 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 155 components and 5.56287 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166235Jy sigma=0.794770 ! Fit after self-cal, rms=0.166006Jy sigma=0.793025 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6732 mas, bmaj=1.434 mas, bpa=-1.814 degrees ! Estimated noise=2.82395 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6732 x 1.434 at -1.814 degrees (North through East) ! Clean map min=-0.046584 max=4.5132 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.166006Jy sigma=0.793025 ! Fit after self-cal, rms=0.149716Jy sigma=0.681232 ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6727 mas, bmaj=1.435 mas, bpa=-1.846 degrees ! Estimated noise=2.82227 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00742448 Jy ! Component: 100 - total flux cleaned = -0.00629258 Jy ! Component: 150 - total flux cleaned = -0.00431606 Jy ! Component: 200 - total flux cleaned = -0.00296998 Jy ! Total flux subtracted in 200 components = -0.00296998 Jy ! Clean residual min=-0.015774 max=0.015069 Jy/beam ! Clean residual mean=0.000014 rms=0.002884 Jy/beam ! Combined flux in latest and established models = 5.55991 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 167 components and 5.55991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145905Jy sigma=0.654700 ! Fit after self-cal, rms=0.145709Jy sigma=0.653745 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00323156 Jy ! Component: 100 - total flux cleaned = 0.00405117 Jy ! Component: 150 - total flux cleaned = 0.00405128 Jy ! Component: 200 - total flux cleaned = 0.00443758 Jy ! Total flux subtracted in 200 components = 0.00443758 Jy ! Clean residual min=-0.014925 max=0.014634 Jy/beam ! Clean residual mean=0.000010 rms=0.002788 Jy/beam ! Combined flux in latest and established models = 5.56434 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 180 components and 5.56434 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143435Jy sigma=0.639792 ! Fit after self-cal, rms=0.143325Jy sigma=0.639373 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.143325Jy sigma=0.639373 ! Fit after self-cal, rms=0.141065Jy sigma=0.633506 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.5746 mas, bmaj=1.138 mas, bpa=-1.143 degrees ! Estimated noise=3.48824 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.45808 Jy ! Component: 100 - total flux cleaned = 4.3676 Jy ! Component: 150 - total flux cleaned = 4.79256 Jy ! Component: 200 - total flux cleaned = 5.01321 Jy ! Total flux subtracted in 200 components = 5.01321 Jy ! Clean residual min=-0.060417 max=0.112453 Jy/beam ! Clean residual mean=0.000007 rms=0.009997 Jy/beam ! Combined flux in latest and established models = 5.01321 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 9 model components to the UV plane model. ! The established model now contains 9 components and 5.01321 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6734 mas, bmaj=1.435 mas, bpa=-1.838 degrees ! Estimated noise=2.82157 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.201076 Jy ! Component: 100 - total flux cleaned = 0.309401 Jy ! Component: 150 - total flux cleaned = 0.378597 Jy ! Component: 200 - total flux cleaned = 0.413281 Jy ! Total flux subtracted in 200 components = 0.413281 Jy ! Clean residual min=-0.033968 max=0.040622 Jy/beam ! Clean residual mean=0.000061 rms=0.006405 Jy/beam ! Combined flux in latest and established models = 5.42649 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 30 components and 5.42649 Jy ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Added new window around map position (-0.6, 0.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0225648 Jy ! Component: 100 - total flux cleaned = 0.0333903 Jy ! Component: 150 - total flux cleaned = 0.0431807 Jy ! Component: 200 - total flux cleaned = 0.0534847 Jy ! Total flux subtracted in 200 components = 0.0534847 Jy ! Clean residual min=-0.030024 max=0.029071 Jy/beam ! Clean residual mean=0.000045 rms=0.005085 Jy/beam ! Combined flux in latest and established models = 5.47997 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 43 components and 5.47997 Jy ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=2.148 mas, bmaj=3.576 mas, bpa=-5.615 degrees ! Estimated noise=3.86679 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0316614 Jy ! Component: 100 - total flux cleaned = 0.0470974 Jy ! Component: 150 - total flux cleaned = 0.0550194 Jy ! Component: 200 - total flux cleaned = 0.0612616 Jy ! Total flux subtracted in 200 components = 0.0612616 Jy ! Clean residual min=-0.015014 max=0.017016 Jy/beam ! Clean residual mean=0.000043 rms=0.004083 Jy/beam ! Combined flux in latest and established models = 5.54123 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632237 Jy ! Component: 100 - total flux cleaned = 0.0110559 Jy ! Component: 150 - total flux cleaned = 0.0142344 Jy ! Component: 200 - total flux cleaned = 0.0174473 Jy ! Total flux subtracted in 200 components = 0.0174473 Jy ! Clean residual min=-0.014161 max=0.014716 Jy/beam ! Clean residual mean=0.000026 rms=0.003678 Jy/beam ! Combined flux in latest and established models = 5.55868 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 107 components and 5.55868 Jy ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! Estimated beam: bmin=0.6734 mas, bmaj=1.435 mas, bpa=-1.838 degrees ! Estimated noise=2.82157 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00765806 Jy ! Component: 100 - total flux cleaned = -0.00765395 Jy ! Component: 150 - total flux cleaned = -0.0075947 Jy ! Component: 200 - total flux cleaned = -0.00662451 Jy ! Total flux subtracted in 200 components = -0.00662451 Jy ! Clean residual min=-0.024995 max=0.026141 Jy/beam ! Clean residual mean=0.000014 rms=0.003986 Jy/beam ! Combined flux in latest and established models = 5.55206 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 119 components and 5.55206 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184636Jy sigma=0.867762 ! Fit after self-cal, rms=0.181320Jy sigma=0.850671 wmodel J0730-1141_X_map.mod ! Writing 119 model components to file: J0730-1141_X_map.mod wobs J0730-1141_X_uvs.fits ! Writing UV FITS file: J0730-1141_X_uvs.fits wwins J0730-1141_X_map.win ! wwins: Wrote 11 windows to J0730-1141_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00822399 Jy ! Component: 100 - total flux cleaned = 0.00975884 Jy ! Component: 150 - total flux cleaned = 0.0116048 Jy ! Component: 200 - total flux cleaned = 0.013373 Jy ! Component: 250 - total flux cleaned = 0.0140586 Jy ! Component: 300 - total flux cleaned = 0.0160399 Jy ! Component: 350 - total flux cleaned = 0.0170042 Jy ! Component: 400 - total flux cleaned = 0.0185604 Jy ! Component: 450 - total flux cleaned = 0.0191668 Jy ! Component: 500 - total flux cleaned = 0.019461 Jy ! Component: 550 - total flux cleaned = 0.0188833 Jy ! Component: 600 - total flux cleaned = 0.0197456 Jy ! Component: 650 - total flux cleaned = 0.0200292 Jy ! Component: 700 - total flux cleaned = 0.0197536 Jy ! Component: 750 - total flux cleaned = 0.0194845 Jy ! Component: 800 - total flux cleaned = 0.0192194 Jy ! Component: 850 - total flux cleaned = 0.0189614 Jy ! Component: 900 - total flux cleaned = 0.0194761 Jy ! Component: 950 - total flux cleaned = 0.0192234 Jy ! Component: 1000 - total flux cleaned = 0.0187242 Jy ! Component: 1050 - total flux cleaned = 0.0187271 Jy ! Component: 1100 - total flux cleaned = 0.0187279 Jy ! Component: 1150 - total flux cleaned = 0.0175295 Jy ! Component: 1200 - total flux cleaned = 0.0172981 Jy ! Component: 1250 - total flux cleaned = 0.0170642 Jy ! Component: 1300 - total flux cleaned = 0.0170674 Jy ! Component: 1350 - total flux cleaned = 0.0163787 Jy ! Component: 1400 - total flux cleaned = 0.0152471 Jy ! Component: 1450 - total flux cleaned = 0.0156968 Jy ! Component: 1500 - total flux cleaned = 0.0154755 Jy ! Component: 1550 - total flux cleaned = 0.0148142 Jy ! Component: 1600 - total flux cleaned = 0.0143798 Jy ! Component: 1650 - total flux cleaned = 0.0150272 Jy ! Component: 1700 - total flux cleaned = 0.0141729 Jy ! Component: 1750 - total flux cleaned = 0.0143839 Jy ! Component: 1800 - total flux cleaned = 0.0137575 Jy ! Component: 1850 - total flux cleaned = 0.0139638 Jy ! Component: 1900 - total flux cleaned = 0.0133499 Jy ! Component: 1950 - total flux cleaned = 0.0131463 Jy ! Component: 2000 - total flux cleaned = 0.0125441 Jy ! Component: 2050 - total flux cleaned = 0.0123428 Jy ! Component: 2100 - total flux cleaned = 0.012737 Jy ! Component: 2150 - total flux cleaned = 0.012542 Jy ! Component: 2200 - total flux cleaned = 0.0127396 Jy ! Component: 2250 - total flux cleaned = 0.0131251 Jy ! Component: 2300 - total flux cleaned = 0.0131269 Jy ! Component: 2350 - total flux cleaned = 0.0135066 Jy ! Component: 2400 - total flux cleaned = 0.0133197 Jy ! Component: 2450 - total flux cleaned = 0.013693 Jy ! Component: 2500 - total flux cleaned = 0.0136902 Jy ! Component: 2550 - total flux cleaned = 0.013689 Jy ! Component: 2600 - total flux cleaned = 0.0144121 Jy ! Component: 2650 - total flux cleaned = 0.0140535 Jy ! Component: 2700 - total flux cleaned = 0.0138759 Jy ! Component: 2750 - total flux cleaned = 0.0135249 Jy ! Component: 2800 - total flux cleaned = 0.0143987 Jy ! Component: 2850 - total flux cleaned = 0.0137054 Jy ! Component: 2900 - total flux cleaned = 0.0143967 Jy ! Component: 2950 - total flux cleaned = 0.014397 Jy ! Component: 3000 - total flux cleaned = 0.0149065 Jy ! Component: 3050 - total flux cleaned = 0.0155771 Jy ! Component: 3100 - total flux cleaned = 0.0145744 Jy ! Component: 3150 - total flux cleaned = 0.0149069 Jy ! Component: 3200 - total flux cleaned = 0.0154019 Jy ! Component: 3250 - total flux cleaned = 0.0155665 Jy ! Component: 3300 - total flux cleaned = 0.0157285 Jy ! Component: 3350 - total flux cleaned = 0.0158904 Jy ! Component: 3400 - total flux cleaned = 0.015731 Jy ! Component: 3450 - total flux cleaned = 0.0158899 Jy ! Component: 3500 - total flux cleaned = 0.0163609 Jy ! Component: 3550 - total flux cleaned = 0.0168293 Jy ! Component: 3600 - total flux cleaned = 0.0169837 Jy ! Component: 3650 - total flux cleaned = 0.0174446 Jy ! Component: 3700 - total flux cleaned = 0.0172926 Jy ! Component: 3750 - total flux cleaned = 0.0171396 Jy ! Component: 3800 - total flux cleaned = 0.0172911 Jy ! Component: 3850 - total flux cleaned = 0.0166914 Jy ! Component: 3900 - total flux cleaned = 0.0166911 Jy ! Component: 3950 - total flux cleaned = 0.0171348 Jy ! Component: 4000 - total flux cleaned = 0.0166952 Jy ! Component: 4050 - total flux cleaned = 0.0168392 Jy ! Total flux subtracted in 4096 components = 0.0169831 Jy ! Clean residual min=-0.008073 max=0.007225 Jy/beam ! Clean residual mean=-0.000002 rms=0.002162 Jy/beam ! Combined flux in latest and established models = 5.56904 Jy keep ! Adding 243 model components to the UV plane model. ! The established model now contains 351 components and 5.56904 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv125_uvs/J0730-1141_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6734 x 1.435 at -1.838 degrees (North through East) ! Clean map min=-0.041049 max=4.5067 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv125_uvs/J0730-1141_X_map.fits wmodel /scr/pima/rv125_uvs/J0730-1141_X_map.mod ! Writing 351 model components to file: /scr/pima/rv125_uvs/J0730-1141_X_map.mod wobs /scr/pima/rv125_uvs/J0730-1141_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv125_uvs/J0730-1141_X_uvs.fits wwins /scr/pima/rv125_uvs/J0730-1141_X_map.win ! wwins: Wrote 12 windows to /scr/pima/rv125_uvs/J0730-1141_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 4.50671 invert ! Inverting map ! Your choice of large map pixels excluded 3.29% of the data. ! The x-axis pixel size should ideally be below 0.1646 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00215784 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.143642 0.143642 0.287283 0.574566 1.14913 2.29827 4.59653 9.19306 18.3861 36.7723 73.5445 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0064 print "peak= ", int(1000*peak_flux)/1000 ! peak= 4.506 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2088.53 quit ! Quitting program ! Log file /scr/pima/rv125_uvs/J0730-1141_X_dfm.log closed on Sun Dec 23 02:49:51 2018