! Started logfile: /scr/pima/rv125_uvs/J0632-2614_X_dfm.log on Sun Dec 23 02:49:38 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv125_uvs/J0632-2614_X_uva.fits
! Reading UV FITS file: /scr/pima/rv125_uvs/J0632-2614_X_uva.fits
! AN table 1: 90 integrations on 36 of 36 possible baselines.
! Apparent sampling: 0.558025 visibilities/baseline/integration-bin.
! Found source: J0632-2614
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 69 lines of history.
! 
! Reading 7232 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0632-2614_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 261 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 261 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 261 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 261 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.062809Jy  sigma=16.498799
! Fit after  self-cal, rms=0.671489Jy  sigma=10.133855
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.7247 mas, bmaj=1.846 mas, bpa=-2.539 degrees
! Estimated noise=0.895133 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.255293 Jy
! Component: 100  -  total flux cleaned = 0.312982 Jy
! Total flux subtracted in 100 components = 0.312982 Jy
! Clean residual min=-0.011523 max=0.021623 Jy/beam
! Clean residual mean=-0.000014 rms=0.002614 Jy/beam
! Combined flux in latest and established models = 0.312982 Jy
! Performing phase self-cal
! Adding 5 model components to the UV plane model.
! The established model now contains 5 components and 0.312982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.093038Jy  sigma=1.396506
! Fit after  self-cal, rms=0.093036Jy  sigma=1.396451
! Inverting map 
! Added new window around map position (0.8, 1.8).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0244452 Jy
! Component: 100  -  total flux cleaned = 0.0401871 Jy
! Total flux subtracted in 100 components = 0.0401871 Jy
! Clean residual min=-0.009005 max=0.014274 Jy/beam
! Clean residual mean=-0.000013 rms=0.002103 Jy/beam
! Combined flux in latest and established models = 0.353169 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 12 components and 0.353169 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.083718Jy  sigma=1.208310
! Fit after  self-cal, rms=0.083593Jy  sigma=1.205685
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9298 mas, bmaj=2.322 mas, bpa=-2.778 degrees
! Estimated noise=0.572368 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-1, -1.6).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0194341 Jy
! Component: 100  -  total flux cleaned = 0.0311439 Jy
! Component: 150  -  total flux cleaned = 0.0389043 Jy
! Component: 200  -  total flux cleaned = 0.0441618 Jy
! Total flux subtracted in 200 components = 0.0441618 Jy
! Clean residual min=-0.008158 max=0.010136 Jy/beam
! Clean residual mean=-0.000032 rms=0.001948 Jy/beam
! Combined flux in latest and established models = 0.397331 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 42 components and 0.397331 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078812Jy  sigma=1.117760
! Fit after  self-cal, rms=0.078705Jy  sigma=1.115420
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9298 x 2.322 at -2.778 degrees (North through East)
! Clean map  min=-0.0073973  max=0.32271 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.00     HN        1.22     KP        1.05     LA        1.04     
!   MK        0.98     NL        1.02     OV        0.95     PT        0.89     
!   SC        0.97     
! 
! 
! Correcting IF 2.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.22     KP        1.05     LA        1.04     
!   MK        0.97     NL        1.03     OV        0.96     PT        0.89     
!   SC        1.00     
! 
! 
! Correcting IF 3.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     HN        1.20     KP        1.07     LA        1.05     
!   MK        1.01     NL        1.04     OV        0.96     PT        0.86     
!   SC        1.01     
! 
! 
! Correcting IF 4.
!  A total of 3 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     HN        1.17     KP        1.07     LA        1.04     
!   MK        1.04     NL        1.04     OV        0.98     PT        0.86     
!   SC        1.00     
! 
! 
! Fit before self-cal, rms=0.078705Jy  sigma=1.115420
! Fit after  self-cal, rms=0.073629Jy  sigma=1.002377
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.933 mas, bmaj=2.325 mas, bpa=-2.352 degrees
! Estimated noise=0.574671 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00628483 Jy
! Component: 100  -  total flux cleaned = -0.00758952 Jy
! Component: 150  -  total flux cleaned = -0.00826703 Jy
! Component: 200  -  total flux cleaned = -0.00862456 Jy
! Total flux subtracted in 200 components = -0.00862456 Jy
! Clean residual min=-0.004117 max=0.005285 Jy/beam
! Clean residual mean=-0.000006 rms=0.001073 Jy/beam
! Combined flux in latest and established models = 0.388706 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 63 components and 0.388706 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072972Jy  sigma=0.989765
! Fit after  self-cal, rms=0.073069Jy  sigma=0.989255
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.073069Jy  sigma=0.989255
! Fit after  self-cal, rms=0.071716Jy  sigma=0.952460
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9361 mas, bmaj=2.347 mas, bpa=-2.279 degrees
! Estimated noise=0.572454 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00380094 Jy
! Component: 100  -  total flux cleaned = -0.00497239 Jy
! Component: 150  -  total flux cleaned = -0.00532673 Jy
! Component: 200  -  total flux cleaned = -0.00565103 Jy
! Total flux subtracted in 200 components = -0.00565103 Jy
! Clean residual min=-0.003018 max=0.004067 Jy/beam
! Clean residual mean=0.000000 rms=0.000725 Jy/beam
! Combined flux in latest and established models = 0.383055 Jy
selfcal
! Performing phase self-cal
! Adding 14 model components to the UV plane model.
! The established model now contains 72 components and 0.383055 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071393Jy  sigma=0.947956
! Fit after  self-cal, rms=0.071410Jy  sigma=0.947809
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-4.2, -16.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00296293 Jy
! Component: 100  -  total flux cleaned = 0.00313353 Jy
! Component: 150  -  total flux cleaned = 0.00313595 Jy
! Component: 200  -  total flux cleaned = 0.00313765 Jy
! Total flux subtracted in 200 components = 0.00313765 Jy
! Clean residual min=-0.002917 max=0.002785 Jy/beam
! Clean residual mean=0.000001 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 0.386193 Jy
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 86 components and 0.386193 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071143Jy  sigma=0.944644
! Fit after  self-cal, rms=0.071137Jy  sigma=0.944497
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071137Jy  sigma=0.944497
! Fit after  self-cal, rms=0.071443Jy  sigma=0.932504
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9379 mas, bmaj=2.354 mas, bpa=-2.258 degrees
! Estimated noise=0.573621 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0020031 Jy
! Component: 100  -  total flux cleaned = -0.00200741 Jy
! Component: 150  -  total flux cleaned = -0.00207396 Jy
! Component: 200  -  total flux cleaned = -0.00219742 Jy
! Total flux subtracted in 200 components = -0.00219742 Jy
! Clean residual min=-0.002294 max=0.002075 Jy/beam
! Clean residual mean=0.000003 rms=0.000542 Jy/beam
! Combined flux in latest and established models = 0.383995 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 94 components and 0.383995 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071241Jy  sigma=0.930305
! Fit after  self-cal, rms=0.071272Jy  sigma=0.930254
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000121747 Jy
! Component: 100  -  total flux cleaned = -0.000177503 Jy
! Component: 150  -  total flux cleaned = -0.000122493 Jy
! Component: 200  -  total flux cleaned = -7.25623e-05 Jy
! Total flux subtracted in 200 components = -7.25623e-05 Jy
! Clean residual min=-0.002193 max=0.002067 Jy/beam
! Clean residual mean=0.000003 rms=0.000532 Jy/beam
! Combined flux in latest and established models = 0.383923 Jy
! Performing phase self-cal
! Adding 23 model components to the UV plane model.
! The established model now contains 102 components and 0.383923 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071180Jy  sigma=0.929262
! Fit after  self-cal, rms=0.071178Jy  sigma=0.929248
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071178Jy  sigma=0.929248
! Fit after  self-cal, rms=0.071399Jy  sigma=0.928722
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.33 mas, bmaj=5.164 mas, bpa=-4.447 degrees
! Estimated noise=0.685937 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00178057 Jy
! Component: 100  -  total flux cleaned = -0.00212643 Jy
! Component: 150  -  total flux cleaned = -0.00220109 Jy
! Component: 200  -  total flux cleaned = -0.00220081 Jy
! Total flux subtracted in 200 components = -0.00220081 Jy
! Clean residual min=-0.002143 max=0.002044 Jy/beam
! Clean residual mean=0.000006 rms=0.000550 Jy/beam
! Combined flux in latest and established models = 0.381722 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 110 components and 0.381722 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071334Jy  sigma=0.928146
! Fit after  self-cal, rms=0.071337Jy  sigma=0.928128
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.21234e-05 Jy
! Component: 100  -  total flux cleaned = -3.12043e-05 Jy
! Component: 150  -  total flux cleaned = -6.00977e-05 Jy
! Component: 200  -  total flux cleaned = -8.79858e-05 Jy
! Total flux subtracted in 200 components = -8.79858e-05 Jy
! Clean residual min=-0.002086 max=0.002003 Jy/beam
! Clean residual mean=0.000006 rms=0.000539 Jy/beam
! Combined flux in latest and established models = 0.381634 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 114 components and 0.381634 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071324Jy  sigma=0.928043
! Fit after  self-cal, rms=0.071322Jy  sigma=0.928022
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9376 mas, bmaj=2.356 mas, bpa=-2.26 degrees
! Estimated noise=0.573797 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9376 x 2.356 at -2.26 degrees (North through East)
! Clean map  min=-0.0019864  max=0.32822 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.7284 mas, bmaj=1.859 mas, bpa=-2.013 degrees
! Estimated noise=0.908208 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.258761 Jy
! Component: 100  -  total flux cleaned = 0.316502 Jy
! Component: 150  -  total flux cleaned = 0.338117 Jy
! Component: 200  -  total flux cleaned = 0.351996 Jy
! Total flux subtracted in 200 components = 0.351996 Jy
! Clean residual min=-0.005017 max=0.007564 Jy/beam
! Clean residual mean=-0.000002 rms=0.001146 Jy/beam
! Combined flux in latest and established models = 0.351996 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 13 model components to the UV plane model.
! The established model now contains 13 components and 0.351996 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9376 mas, bmaj=2.356 mas, bpa=-2.26 degrees
! Estimated noise=0.573797 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0114863 Jy
! Component: 100  -  total flux cleaned = 0.0180697 Jy
! Component: 150  -  total flux cleaned = 0.0222622 Jy
! Component: 200  -  total flux cleaned = 0.0253359 Jy
! Total flux subtracted in 200 components = 0.0253359 Jy
! Clean residual min=-0.002411 max=0.002671 Jy/beam
! Clean residual mean=0.000001 rms=0.000567 Jy/beam
! Combined flux in latest and established models = 0.377331 Jy
! Adding 20 model components to the UV plane model.
! The established model now contains 28 components and 0.377331 Jy
! Inverting map 
! Added new window around map position (-2.6, -2.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000841958 Jy
! Component: 100  -  total flux cleaned = 0.00174483 Jy
! Component: 150  -  total flux cleaned = 0.0019074 Jy
! Component: 200  -  total flux cleaned = 0.00221475 Jy
! Total flux subtracted in 200 components = 0.00221475 Jy
! Clean residual min=-0.002172 max=0.002153 Jy/beam
! Clean residual mean=0.000002 rms=0.000537 Jy/beam
! Combined flux in latest and established models = 0.379546 Jy
! Adding 22 model components to the UV plane model.
! The established model now contains 40 components and 0.379546 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.33 mas, bmaj=5.164 mas, bpa=-4.447 degrees
! Estimated noise=0.685937 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000359316 Jy
! Component: 100  -  total flux cleaned = -0.000317315 Jy
! Component: 150  -  total flux cleaned = -0.00015602 Jy
! Component: 200  -  total flux cleaned = -0.000119675 Jy
! Total flux subtracted in 200 components = -0.000119675 Jy
! Clean residual min=-0.001863 max=0.002115 Jy/beam
! Clean residual mean=0.000003 rms=0.000524 Jy/beam
! Combined flux in latest and established models = 0.379426 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000136419 Jy
! Component: 100  -  total flux cleaned = 0.00019827 Jy
! Component: 150  -  total flux cleaned = 0.000285815 Jy
! Component: 200  -  total flux cleaned = 0.000339899 Jy
! Total flux subtracted in 200 components = 0.000339899 Jy
! Clean residual min=-0.001859 max=0.002099 Jy/beam
! Clean residual mean=0.000004 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.379766 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 62 components and 0.379766 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9376 mas, bmaj=2.356 mas, bpa=-2.26 degrees
! Estimated noise=0.573797 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000240801 Jy
! Component: 100  -  total flux cleaned = -0.000172627 Jy
! Component: 150  -  total flux cleaned = -0.000109422 Jy
! Component: 200  -  total flux cleaned = 6.66921e-05 Jy
! Total flux subtracted in 200 components = 6.66921e-05 Jy
! Clean residual min=-0.001991 max=0.001978 Jy/beam
! Clean residual mean=0.000002 rms=0.000511 Jy/beam
! Combined flux in latest and established models = 0.379833 Jy
selfcal
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 69 components and 0.379833 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.071358Jy  sigma=0.929478
! Fit after  self-cal, rms=0.071341Jy  sigma=0.929242
wmodel J0632-2614_X_map.mod
! Writing 69 model components to file: J0632-2614_X_map.mod
wobs   J0632-2614_X_uvs.fits
! Writing UV FITS file: J0632-2614_X_uvs.fits
wwins  J0632-2614_X_map.win
! wwins: Wrote 5 windows to J0632-2614_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000351426 Jy
! Component: 100  -  total flux cleaned = -0.000422615 Jy
! Component: 150  -  total flux cleaned = -0.000526884 Jy
! Component: 200  -  total flux cleaned = -0.000627715 Jy
! Component: 250  -  total flux cleaned = -0.000627964 Jy
! Component: 300  -  total flux cleaned = -0.000660516 Jy
! Component: 350  -  total flux cleaned = -0.000628828 Jy
! Component: 400  -  total flux cleaned = -0.000628985 Jy
! Component: 450  -  total flux cleaned = -0.000598636 Jy
! Component: 500  -  total flux cleaned = -0.00071959 Jy
! Component: 550  -  total flux cleaned = -0.000719132 Jy
! Component: 600  -  total flux cleaned = -0.000778216 Jy
! Component: 650  -  total flux cleaned = -0.000749247 Jy
! Component: 700  -  total flux cleaned = -0.000806921 Jy
! Component: 750  -  total flux cleaned = -0.000806988 Jy
! Component: 800  -  total flux cleaned = -0.00094842 Jy
! Component: 850  -  total flux cleaned = -0.00091995 Jy
! Component: 900  -  total flux cleaned = -0.00100305 Jy
! Component: 950  -  total flux cleaned = -0.001113 Jy
! Component: 1000  -  total flux cleaned = -0.00105877 Jy
! Component: 1050  -  total flux cleaned = -0.00116676 Jy
! Component: 1100  -  total flux cleaned = -0.00116652 Jy
! Component: 1150  -  total flux cleaned = -0.00116655 Jy
! Component: 1200  -  total flux cleaned = -0.00114029 Jy
! Component: 1250  -  total flux cleaned = -0.00114036 Jy
! Component: 1300  -  total flux cleaned = -0.0012705 Jy
! Component: 1350  -  total flux cleaned = -0.00124437 Jy
! Component: 1400  -  total flux cleaned = -0.00126987 Jy
! Component: 1450  -  total flux cleaned = -0.00124418 Jy
! Component: 1500  -  total flux cleaned = -0.00129446 Jy
! Component: 1550  -  total flux cleaned = -0.00129441 Jy
! Component: 1600  -  total flux cleaned = -0.00114439 Jy
! Component: 1650  -  total flux cleaned = -0.00111978 Jy
! Component: 1700  -  total flux cleaned = -0.0010459 Jy
! Component: 1750  -  total flux cleaned = -0.000947722 Jy
! Component: 1800  -  total flux cleaned = -0.000898951 Jy
! Component: 1850  -  total flux cleaned = -0.000971644 Jy
! Component: 1900  -  total flux cleaned = -0.000899257 Jy
! Component: 1950  -  total flux cleaned = -0.000875077 Jy
! Component: 2000  -  total flux cleaned = -0.000755607 Jy
! Component: 2050  -  total flux cleaned = -0.000708103 Jy
! Component: 2100  -  total flux cleaned = -0.000684267 Jy
! Component: 2150  -  total flux cleaned = -0.000707862 Jy
! Component: 2200  -  total flux cleaned = -0.000544681 Jy
! Component: 2250  -  total flux cleaned = -0.000521384 Jy
! Component: 2300  -  total flux cleaned = -0.000360351 Jy
! Component: 2350  -  total flux cleaned = -0.000360455 Jy
! Component: 2400  -  total flux cleaned = -0.000405999 Jy
! Component: 2450  -  total flux cleaned = -0.000337928 Jy
! Component: 2500  -  total flux cleaned = -0.000247715 Jy
! Component: 2550  -  total flux cleaned = -0.000270189 Jy
! Component: 2600  -  total flux cleaned = -0.00027024 Jy
! Component: 2650  -  total flux cleaned = -0.000225761 Jy
! Component: 2700  -  total flux cleaned = -0.000314365 Jy
! Component: 2750  -  total flux cleaned = -0.000248062 Jy
! Component: 2800  -  total flux cleaned = -0.000313738 Jy
! Component: 2850  -  total flux cleaned = -0.000357076 Jy
! Component: 2900  -  total flux cleaned = -0.000443776 Jy
! Component: 2950  -  total flux cleaned = -0.000335907 Jy
! Component: 3000  -  total flux cleaned = -0.000443003 Jy
! Component: 3050  -  total flux cleaned = -0.000464253 Jy
! Component: 3100  -  total flux cleaned = -0.000400425 Jy
! Component: 3150  -  total flux cleaned = -0.000421682 Jy
! Component: 3200  -  total flux cleaned = -0.000484719 Jy
! Component: 3250  -  total flux cleaned = -0.000379886 Jy
! Component: 3300  -  total flux cleaned = -0.000400791 Jy
! Component: 3350  -  total flux cleaned = -0.000463094 Jy
! Component: 3400  -  total flux cleaned = -0.000380406 Jy
! Component: 3450  -  total flux cleaned = -0.000359788 Jy
! Component: 3500  -  total flux cleaned = -0.000236924 Jy
! Component: 3550  -  total flux cleaned = -0.000339047 Jy
! Component: 3600  -  total flux cleaned = -0.000278107 Jy
! Component: 3650  -  total flux cleaned = -0.000258008 Jy
! Component: 3700  -  total flux cleaned = -0.000238027 Jy
! Component: 3750  -  total flux cleaned = -0.000178036 Jy
! Component: 3800  -  total flux cleaned = -9.82665e-05 Jy
! Component: 3850  -  total flux cleaned = -7.83645e-05 Jy
! Component: 3900  -  total flux cleaned = -0.000117737 Jy
! Component: 3950  -  total flux cleaned = -3.89412e-05 Jy
! Component: 4000  -  total flux cleaned = 5.9258e-05 Jy
! Component: 4050  -  total flux cleaned = 0.000117919 Jy
! Total flux subtracted in 4096 components = 9.83553e-05 Jy
! Clean residual min=-0.001103 max=0.001154 Jy/beam
! Clean residual mean=0.000001 rms=0.000343 Jy/beam
! Combined flux in latest and established models = 0.379931 Jy
keep
! Adding 304 model components to the UV plane model.
! The established model now contains 373 components and 0.379932 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv125_uvs/J0632-2614_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9376 x 2.356 at -2.26 degrees (North through East)
! Clean map  min=-0.0017363  max=0.33122 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv125_uvs/J0632-2614_X_map.fits
wmodel /scr/pima/rv125_uvs/J0632-2614_X_map.mod
! Writing 373 model components to file: /scr/pima/rv125_uvs/J0632-2614_X_map.mod
wobs   /scr/pima/rv125_uvs/J0632-2614_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv125_uvs/J0632-2614_X_uvs.fits
wwins  /scr/pima/rv125_uvs/J0632-2614_X_map.win
! wwins: Wrote 6 windows to /scr/pima/rv125_uvs/J0632-2614_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.33122 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000342201 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.309947 0.309947 0.619893 1.23979 2.47957 4.95914 9.91829 19.8366 39.6732 79.3463
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.331 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  967.908 
quit
! Quitting program
! Log file /scr/pima/rv125_uvs/J0632-2614_X_dfm.log closed on Sun Dec 23 02:49:42 2018