! Started logfile: /scr/pima/rv125_uvs/J0632-2614_S_dfm.log on Sun Dec 23 06:56:48 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv125_uvs/J0632-2614_S_uva.fits ! Reading UV FITS file: /scr/pima/rv125_uvs/J0632-2614_S_uva.fits ! AN table 1: 90 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.558025 visibilities/baseline/integration-bin. ! Found source: J0632-2614 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 7232 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0632-2614_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 810 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 261 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.023643Jy sigma=13.478529 ! Fit after self-cal, rms=0.749185Jy sigma=9.810732 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.683 mas, bmaj=7.008 mas, bpa=-2.03 degrees ! Estimated noise=1.21078 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.196746 Jy ! Component: 100 - total flux cleaned = 0.239846 Jy ! Total flux subtracted in 100 components = 0.239846 Jy ! Clean residual min=-0.013587 max=0.020511 Jy/beam ! Clean residual mean=-0.000028 rms=0.003410 Jy/beam ! Combined flux in latest and established models = 0.239846 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 6 components and 0.239846 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104461Jy sigma=1.341858 ! Fit after self-cal, rms=0.104401Jy sigma=1.341444 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.395 mas, bmaj=8.548 mas, bpa=-1.644 degrees ! Estimated noise=0.773682 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.5, -16.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0267908 Jy ! Component: 100 - total flux cleaned = 0.0433498 Jy ! Component: 150 - total flux cleaned = 0.0529376 Jy ! Component: 200 - total flux cleaned = 0.0552459 Jy ! Total flux subtracted in 200 components = 0.0552459 Jy ! Clean residual min=-0.011047 max=0.018645 Jy/beam ! Clean residual mean=0.000017 rms=0.003059 Jy/beam ! Combined flux in latest and established models = 0.295092 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 35 components and 0.295092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097043Jy sigma=1.228817 ! Fit after self-cal, rms=0.096295Jy sigma=1.217265 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.395 x 8.548 at -1.644 degrees (North through East) ! Clean map min=-0.010876 max=0.2519 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.22 HN 1.09 KP 0.92 LA 0.91 ! MK 0.97 NL 1.17 OV 0.91 PT 1.06 ! SC 0.94 ! ! ! Correcting IF 2. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.93 HN 1.13 KP 0.88 LA 0.90 ! MK 0.99 NL 1.14 OV 0.85 PT 1.05 ! SC 0.86 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* HN 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* ! ! ! Correcting IF 4. ! A total of 3 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.47 HN 1.10 KP 0.89 LA 0.89 ! MK 0.96 NL 1.14 OV 0.86 PT 1.02 ! SC 0.91 ! ! ! Fit before self-cal, rms=0.096295Jy sigma=1.217265 ! Fit after self-cal, rms=0.095029Jy sigma=1.019591 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.326 mas, bmaj=8.554 mas, bpa=-0.8032 degrees ! Estimated noise=0.767077 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00412975 Jy ! Component: 100 - total flux cleaned = -0.00516347 Jy ! Component: 150 - total flux cleaned = -0.00593521 Jy ! Component: 200 - total flux cleaned = -0.00650494 Jy ! Total flux subtracted in 200 components = -0.00650494 Jy ! Clean residual min=-0.005967 max=0.006729 Jy/beam ! Clean residual mean=0.000010 rms=0.001522 Jy/beam ! Combined flux in latest and established models = 0.288587 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 57 components and 0.288587 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094412Jy sigma=1.013032 ! Fit after self-cal, rms=0.094700Jy sigma=1.011242 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094700Jy sigma=1.011242 ! Fit after self-cal, rms=0.096867Jy sigma=0.978273 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=8.617 mas, bpa=-1.168 degrees ! Estimated noise=0.773549 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00177176 Jy ! Component: 100 - total flux cleaned = -0.00197162 Jy ! Component: 150 - total flux cleaned = -0.00197198 Jy ! Component: 200 - total flux cleaned = -0.00197426 Jy ! Total flux subtracted in 200 components = -0.00197426 Jy ! Clean residual min=-0.004170 max=0.005332 Jy/beam ! Clean residual mean=-0.000000 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.286613 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 73 components and 0.286613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096699Jy sigma=0.975753 ! Fit after self-cal, rms=0.096742Jy sigma=0.975417 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14, 3.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00519106 Jy ! Component: 100 - total flux cleaned = 0.00614617 Jy ! Component: 150 - total flux cleaned = 0.00623482 Jy ! Component: 200 - total flux cleaned = 0.0061569 Jy ! Total flux subtracted in 200 components = 0.0061569 Jy ! Clean residual min=-0.004027 max=0.003906 Jy/beam ! Clean residual mean=-0.000002 rms=0.001012 Jy/beam ! Combined flux in latest and established models = 0.29277 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 98 components and 0.29277 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096370Jy sigma=0.970436 ! Fit after self-cal, rms=0.096355Jy sigma=0.969942 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096355Jy sigma=0.969942 ! Fit after self-cal, rms=0.096587Jy sigma=0.958135 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.314 mas, bmaj=8.639 mas, bpa=-1.15 degrees ! Estimated noise=0.772007 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00143981 Jy ! Component: 100 - total flux cleaned = -0.00129814 Jy ! Component: 150 - total flux cleaned = -0.00111265 Jy ! Component: 200 - total flux cleaned = -0.00100372 Jy ! Total flux subtracted in 200 components = -0.00100372 Jy ! Clean residual min=-0.003283 max=0.003343 Jy/beam ! Clean residual mean=-0.000002 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.291766 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 111 components and 0.291766 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096458Jy sigma=0.956598 ! Fit after self-cal, rms=0.096466Jy sigma=0.956379 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000251329 Jy ! Component: 100 - total flux cleaned = -8.95723e-05 Jy ! Component: 150 - total flux cleaned = 7.89008e-06 Jy ! Component: 200 - total flux cleaned = 8.01228e-06 Jy ! Total flux subtracted in 200 components = 8.01228e-06 Jy ! Clean residual min=-0.003217 max=0.003311 Jy/beam ! Clean residual mean=-0.000002 rms=0.000823 Jy/beam ! Combined flux in latest and established models = 0.291774 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 124 components and 0.291774 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096399Jy sigma=0.955660 ! Fit after self-cal, rms=0.096394Jy sigma=0.955597 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096394Jy sigma=0.955597 ! Fit after self-cal, rms=0.097027Jy sigma=0.955300 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.931 mas, bmaj=17.79 mas, bpa=-4.298 degrees ! Estimated noise=0.975657 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.17771e-05 Jy ! Component: 100 - total flux cleaned = 0.000200524 Jy ! Component: 150 - total flux cleaned = 0.000339544 Jy ! Component: 200 - total flux cleaned = 0.000419892 Jy ! Total flux subtracted in 200 components = 0.000419892 Jy ! Clean residual min=-0.003716 max=0.004073 Jy/beam ! Clean residual mean=-0.000001 rms=0.001097 Jy/beam ! Combined flux in latest and established models = 0.292194 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 152 components and 0.292194 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096986Jy sigma=0.955056 ! Fit after self-cal, rms=0.096991Jy sigma=0.954900 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000238024 Jy ! Component: 100 - total flux cleaned = 0.000395405 Jy ! Component: 150 - total flux cleaned = 0.000394711 Jy ! Component: 200 - total flux cleaned = 0.00042689 Jy ! Total flux subtracted in 200 components = 0.00042689 Jy ! Clean residual min=-0.003771 max=0.004073 Jy/beam ! Clean residual mean=-0.000001 rms=0.001094 Jy/beam ! Combined flux in latest and established models = 0.292621 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 159 components and 0.292621 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096972Jy sigma=0.954807 ! Fit after self-cal, rms=0.096973Jy sigma=0.954758 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=8.652 mas, bpa=-1.159 degrees ! Estimated noise=0.770953 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.317 x 8.652 at -1.159 degrees (North through East) ! Clean map min=-0.0031408 max=0.25147 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.611 mas, bmaj=7.127 mas, bpa=-1.745 degrees ! Estimated noise=1.21425 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.196832 Jy ! Component: 100 - total flux cleaned = 0.240206 Jy ! Component: 150 - total flux cleaned = 0.253563 Jy ! Component: 200 - total flux cleaned = 0.261596 Jy ! Total flux subtracted in 200 components = 0.261596 Jy ! Clean residual min=-0.004997 max=0.005015 Jy/beam ! Clean residual mean=-0.000014 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 0.261596 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 0.261596 Jy ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=8.652 mas, bpa=-1.159 degrees ! Estimated noise=0.770953 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00939651 Jy ! Component: 100 - total flux cleaned = 0.0156512 Jy ! Component: 150 - total flux cleaned = 0.0200724 Jy ! Component: 200 - total flux cleaned = 0.0233162 Jy ! Total flux subtracted in 200 components = 0.0233162 Jy ! Clean residual min=-0.003322 max=0.003259 Jy/beam ! Clean residual mean=0.000000 rms=0.000869 Jy/beam ! Combined flux in latest and established models = 0.284912 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 75 components and 0.284912 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.931 mas, bmaj=17.79 mas, bpa=-4.298 degrees ! Estimated noise=0.975657 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00376816 Jy ! Component: 100 - total flux cleaned = 0.00579253 Jy ! Component: 150 - total flux cleaned = 0.0063187 Jy ! Component: 200 - total flux cleaned = 0.00665965 Jy ! Total flux subtracted in 200 components = 0.00665965 Jy ! Clean residual min=-0.003864 max=0.004234 Jy/beam ! Clean residual mean=-0.000000 rms=0.001092 Jy/beam ! Combined flux in latest and established models = 0.291572 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000127489 Jy ! Component: 100 - total flux cleaned = 0.000204683 Jy ! Component: 150 - total flux cleaned = 0.000274141 Jy ! Component: 200 - total flux cleaned = 0.000306299 Jy ! Total flux subtracted in 200 components = 0.000306299 Jy ! Clean residual min=-0.003813 max=0.004194 Jy/beam ! Clean residual mean=-0.000000 rms=0.001079 Jy/beam ! Combined flux in latest and established models = 0.291878 Jy ! Adding 48 model components to the UV plane model. ! The established model now contains 121 components and 0.291878 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.317 mas, bmaj=8.652 mas, bpa=-1.159 degrees ! Estimated noise=0.770953 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000365639 Jy ! Component: 100 - total flux cleaned = -0.000558788 Jy ! Component: 150 - total flux cleaned = -0.000671146 Jy ! Component: 200 - total flux cleaned = -0.000770715 Jy ! Total flux subtracted in 200 components = -0.000770715 Jy ! Clean residual min=-0.003118 max=0.002930 Jy/beam ! Clean residual mean=-0.000000 rms=0.000779 Jy/beam ! Combined flux in latest and established models = 0.291107 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 136 components and 0.291107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096962Jy sigma=0.954498 ! Fit after self-cal, rms=0.096910Jy sigma=0.954076 wmodel J0632-2614_S_map.mod ! Writing 136 model components to file: J0632-2614_S_map.mod wobs J0632-2614_S_uvs.fits ! Writing UV FITS file: J0632-2614_S_uvs.fits wwins J0632-2614_S_map.win ! wwins: Wrote 3 windows to J0632-2614_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000393346 Jy ! Component: 100 - total flux cleaned = 0.000640324 Jy ! Component: 150 - total flux cleaned = 0.000825516 Jy ! Component: 200 - total flux cleaned = 0.000780851 Jy ! Component: 250 - total flux cleaned = 0.000695227 Jy ! Component: 300 - total flux cleaned = 0.000567686 Jy ! Component: 350 - total flux cleaned = 0.000359793 Jy ! Component: 400 - total flux cleaned = 0.000115968 Jy ! Component: 450 - total flux cleaned = -8.34469e-05 Jy ! Component: 500 - total flux cleaned = -0.000318592 Jy ! Component: 550 - total flux cleaned = -0.000434328 Jy ! Component: 600 - total flux cleaned = -0.000662545 Jy ! Component: 650 - total flux cleaned = -0.000811926 Jy ! Component: 700 - total flux cleaned = -0.00088608 Jy ! Component: 750 - total flux cleaned = -0.00106706 Jy ! Component: 800 - total flux cleaned = -0.00106683 Jy ! Component: 850 - total flux cleaned = -0.0011728 Jy ! Component: 900 - total flux cleaned = -0.00113809 Jy ! Component: 950 - total flux cleaned = -0.00120737 Jy ! Component: 1000 - total flux cleaned = -0.00130902 Jy ! Component: 1050 - total flux cleaned = -0.0013754 Jy ! Component: 1100 - total flux cleaned = -0.00144133 Jy ! Component: 1150 - total flux cleaned = -0.00137578 Jy ! Component: 1200 - total flux cleaned = -0.00153824 Jy ! Component: 1250 - total flux cleaned = -0.00173048 Jy ! Component: 1300 - total flux cleaned = -0.00179452 Jy ! Component: 1350 - total flux cleaned = -0.00188881 Jy ! Component: 1400 - total flux cleaned = -0.00210527 Jy ! Component: 1450 - total flux cleaned = -0.00216649 Jy ! Component: 1500 - total flux cleaned = -0.00231841 Jy ! Component: 1550 - total flux cleaned = -0.00243813 Jy ! Component: 1600 - total flux cleaned = -0.00258674 Jy ! Component: 1650 - total flux cleaned = -0.00276308 Jy ! Component: 1700 - total flux cleaned = -0.00287888 Jy ! Component: 1750 - total flux cleaned = -0.00296507 Jy ! Component: 1800 - total flux cleaned = -0.00302166 Jy ! Component: 1850 - total flux cleaned = -0.00296549 Jy ! Component: 1900 - total flux cleaned = -0.00299406 Jy ! Component: 1950 - total flux cleaned = -0.00321633 Jy ! Component: 2000 - total flux cleaned = -0.00327143 Jy ! Component: 2050 - total flux cleaned = -0.00329875 Jy ! Component: 2100 - total flux cleaned = -0.00338023 Jy ! Component: 2150 - total flux cleaned = -0.00348727 Jy ! Component: 2200 - total flux cleaned = -0.00364677 Jy ! Component: 2250 - total flux cleaned = -0.00372588 Jy ! Component: 2300 - total flux cleaned = -0.00385655 Jy ! Component: 2350 - total flux cleaned = -0.00398598 Jy ! Component: 2400 - total flux cleaned = -0.00411473 Jy ! Component: 2450 - total flux cleaned = -0.00421662 Jy ! Component: 2500 - total flux cleaned = -0.00426725 Jy ! Component: 2550 - total flux cleaned = -0.00444338 Jy ! Component: 2600 - total flux cleaned = -0.0046433 Jy ! Component: 2650 - total flux cleaned = -0.00474254 Jy ! Component: 2700 - total flux cleaned = -0.00486587 Jy ! Component: 2750 - total flux cleaned = -0.00508611 Jy ! Component: 2800 - total flux cleaned = -0.00530503 Jy ! Component: 2850 - total flux cleaned = -0.00537734 Jy ! Component: 2900 - total flux cleaned = -0.0055453 Jy ! Component: 2950 - total flux cleaned = -0.0057837 Jy ! Component: 3000 - total flux cleaned = -0.00590202 Jy ! Component: 3050 - total flux cleaned = -0.00599634 Jy ! Component: 3100 - total flux cleaned = -0.00620686 Jy ! Component: 3150 - total flux cleaned = -0.00634616 Jy ! Component: 3200 - total flux cleaned = -0.00648457 Jy ! Component: 3250 - total flux cleaned = -0.00664504 Jy ! Component: 3300 - total flux cleaned = -0.00669045 Jy ! Component: 3350 - total flux cleaned = -0.00684911 Jy ! Component: 3400 - total flux cleaned = -0.00698443 Jy ! Component: 3450 - total flux cleaned = -0.00709631 Jy ! Component: 3500 - total flux cleaned = -0.00718527 Jy ! Component: 3550 - total flux cleaned = -0.00731826 Jy ! Component: 3600 - total flux cleaned = -0.00742829 Jy ! Component: 3650 - total flux cleaned = -0.00758148 Jy ! Component: 3700 - total flux cleaned = -0.0077557 Jy ! Component: 3750 - total flux cleaned = -0.00775558 Jy ! Component: 3800 - total flux cleaned = -0.00792793 Jy ! Component: 3850 - total flux cleaned = -0.0079708 Jy ! Component: 3900 - total flux cleaned = -0.00811996 Jy ! Component: 3950 - total flux cleaned = -0.00814113 Jy ! Component: 4000 - total flux cleaned = -0.00828867 Jy ! Component: 4050 - total flux cleaned = -0.00839347 Jy ! Total flux subtracted in 4096 components = -0.00851865 Jy ! Clean residual min=-0.001211 max=0.001390 Jy/beam ! Clean residual mean=-0.000007 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.282588 Jy keep ! Adding 319 model components to the UV plane model. ! The established model now contains 455 components and 0.282588 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv125_uvs/J0632-2614_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.317 x 8.652 at -1.159 degrees (North through East) ! Clean map min=-0.002202 max=0.25239 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv125_uvs/J0632-2614_S_map.fits wmodel /scr/pima/rv125_uvs/J0632-2614_S_map.mod ! Writing 455 model components to file: /scr/pima/rv125_uvs/J0632-2614_S_map.mod wobs /scr/pima/rv125_uvs/J0632-2614_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv125_uvs/J0632-2614_S_uvs.fits wwins /scr/pima/rv125_uvs/J0632-2614_S_map.win ! wwins: Wrote 4 windows to /scr/pima/rv125_uvs/J0632-2614_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.252386 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00041362 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.491652 0.491652 0.983303 1.96661 3.93321 7.86643 15.7329 31.4657 62.9314 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.252 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 610.188 quit ! Quitting program ! Log file /scr/pima/rv125_uvs/J0632-2614_S_dfm.log closed on Sun Dec 23 06:56:52 2018