! Started logfile: /scr/pima/rv125_uvs/J0136+4751_X_dfm.log on Sun Dec 23 02:48:42 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv125_uvs/J0136+4751_X_uva.fits ! Reading UV FITS file: /scr/pima/rv125_uvs/J0136+4751_X_uva.fits ! AN table 1: 2 integrations on 3 of 3 possible baselines. ! AN table 2: 42 integrations on 21 of 21 possible baselines. ! AN table 3: 115 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.244433 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0136+4751 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 69 lines of history. ! ! Reading 5928 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0136+4751_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 246 telescope corrections were flagged in sub-array 2. ! A total of 796 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 246 telescope corrections were flagged in sub-array 2. ! A total of 796 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 270 telescope corrections were flagged in sub-array 2. ! A total of 866 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 270 telescope corrections were flagged in sub-array 2. ! A total of 866 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=2.111640Jy sigma=22.751395 ! Fit after self-cal, rms=0.927781Jy sigma=9.876942 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.888% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.808 mas, bmaj=0.9397 mas, bpa=-31.76 degrees ! Estimated noise=1.3714 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.40875 Jy ! Component: 100 - total flux cleaned = 1.72491 Jy ! Total flux subtracted in 100 components = 1.72491 Jy ! Clean residual min=-0.038752 max=0.108388 Jy/beam ! Clean residual mean=0.000180 rms=0.008482 Jy/beam ! Combined flux in latest and established models = 1.72491 Jy ! Performing phase self-cal ! Adding 5 model components to the UV plane model. ! The established model now contains 5 components and 1.72491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.357124Jy sigma=3.869609 ! Fit after self-cal, rms=0.357094Jy sigma=3.869483 ! Inverting map ! Your choice of large map pixels excluded 0.888% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.109522 Jy ! Component: 100 - total flux cleaned = 0.164694 Jy ! Total flux subtracted in 100 components = 0.164694 Jy ! Clean residual min=-0.036578 max=0.056871 Jy/beam ! Clean residual mean=0.000138 rms=0.007393 Jy/beam ! Combined flux in latest and established models = 1.8896 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 12 components and 1.8896 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.304282Jy sigma=3.256824 ! Fit after self-cal, rms=0.304200Jy sigma=3.256225 ! Inverting map ! Your choice of large map pixels excluded 0.888% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-1.4, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0545673 Jy ! Component: 100 - total flux cleaned = 0.0868586 Jy ! Total flux subtracted in 100 components = 0.0868586 Jy ! Clean residual min=-0.036603 max=0.047006 Jy/beam ! Clean residual mean=0.000115 rms=0.007062 Jy/beam ! Combined flux in latest and established models = 1.97646 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 1.97646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.289036Jy sigma=3.078318 ! Fit after self-cal, rms=0.287787Jy sigma=3.066957 ! Inverting map ! Your choice of large map pixels excluded 0.888% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-1.4, 0.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0296447 Jy ! Component: 100 - total flux cleaned = 0.0477937 Jy ! Total flux subtracted in 100 components = 0.0477937 Jy ! Clean residual min=-0.035193 max=0.045593 Jy/beam ! Clean residual mean=0.000103 rms=0.006817 Jy/beam ! Combined flux in latest and established models = 2.02425 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 30 components and 2.02425 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.279789Jy sigma=2.986098 ! Fit after self-cal, rms=0.278903Jy sigma=2.978263 ! Inverting map ! Your choice of large map pixels excluded 0.888% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.888% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.9013 mas, bmaj=1.117 mas, bpa=-32.78 degrees ! Estimated noise=1.1595 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.044217 Jy ! Component: 100 - total flux cleaned = 0.0731989 Jy ! Component: 150 - total flux cleaned = 0.0933627 Jy ! Component: 200 - total flux cleaned = 0.103096 Jy ! Total flux subtracted in 200 components = 0.103096 Jy ! Clean residual min=-0.032345 max=0.034013 Jy/beam ! Clean residual mean=0.000060 rms=0.007275 Jy/beam ! Combined flux in latest and established models = 2.12735 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 40 components and 2.12735 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.270330Jy sigma=2.885331 ! Fit after self-cal, rms=0.269585Jy sigma=2.876863 ! Inverting map ! Your choice of large map pixels excluded 0.888% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9013 x 1.117 at -32.78 degrees (North through East) ! Clean map min=-0.029935 max=1.8225 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MC 0.00* MK 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.06 MC 1.03 MK 1.03 NY 0.79 ! OV 0.92 SC 1.00 WN 1.56 ! ! A total of 54 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 HN 1.05 KP 1.08 LA 1.01 ! MK 0.99 NL 1.04 NY 0.85 OV 0.97 ! PT 0.86 SC 0.99 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MC 0.00* MK 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.02 MC 1.13 MK 1.04 NY 0.89 ! OV 0.91 SC 1.00 WN 1.58 ! ! A total of 54 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 HN 1.04 KP 1.08 LA 1.02 ! MK 0.98 NL 1.05 NY 0.96 OV 0.97 ! PT 0.87 SC 1.01 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MC 0.00* MK 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.08 MC 1.54 MK 1.04 NY 1.00* ! OV 0.92 SC 0.96 WN 1.52 ! ! A total of 42 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 HN 1.04 KP 1.08 LA 1.02 ! MK 0.98 NL 1.05 NY 1.00* OV 0.98 ! PT 0.85 SC 1.01 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MC 0.00* MK 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 1.03 MC 1.45 MK 1.10 NY 1.00* ! OV 0.96 SC 0.96 WN 1.40 ! ! A total of 42 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 HN 1.04 KP 1.08 LA 1.03 ! MK 0.99 NL 1.05 NY 1.00* OV 0.97 ! PT 0.85 SC 1.03 ! ! ! Fit before self-cal, rms=0.269585Jy sigma=2.876863 ! Fit after self-cal, rms=0.171480Jy sigma=1.600838 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.9386 mas, bmaj=1.111 mas, bpa=-35.86 degrees ! Estimated noise=1.19232 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0042442 Jy ! Component: 100 - total flux cleaned = -0.00662237 Jy ! Component: 150 - total flux cleaned = -0.00865872 Jy ! Component: 200 - total flux cleaned = -0.00994462 Jy ! Total flux subtracted in 200 components = -0.00994462 Jy ! Clean residual min=-0.018368 max=0.018768 Jy/beam ! Clean residual mean=-0.000060 rms=0.003626 Jy/beam ! Combined flux in latest and established models = 2.1174 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 50 components and 2.1174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.170264Jy sigma=1.587109 ! Fit after self-cal, rms=0.170236Jy sigma=1.585968 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-4.6, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175706 Jy ! Component: 100 - total flux cleaned = 0.0244455 Jy ! Component: 150 - total flux cleaned = 0.0241498 Jy ! Component: 200 - total flux cleaned = 0.0236407 Jy ! Total flux subtracted in 200 components = 0.0236407 Jy ! Clean residual min=-0.017633 max=0.012902 Jy/beam ! Clean residual mean=-0.000072 rms=0.003502 Jy/beam ! Combined flux in latest and established models = 2.14104 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 65 components and 2.14104 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168237Jy sigma=1.561507 ! Fit after self-cal, rms=0.168078Jy sigma=1.558481 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168078Jy sigma=1.558481 ! Fit after self-cal, rms=0.133450Jy sigma=1.192940 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.937 mas, bmaj=1.113 mas, bpa=-36.21 degrees ! Estimated noise=1.19355 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0010795 Jy ! Component: 100 - total flux cleaned = 0.000828134 Jy ! Component: 150 - total flux cleaned = -0.000469621 Jy ! Component: 200 - total flux cleaned = -0.00114109 Jy ! Total flux subtracted in 200 components = -0.00114109 Jy ! Clean residual min=-0.012256 max=0.010397 Jy/beam ! Clean residual mean=0.000016 rms=0.002318 Jy/beam ! Combined flux in latest and established models = 2.1399 Jy selfcal ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 70 components and 2.1399 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132040Jy sigma=1.179626 ! Fit after self-cal, rms=0.131936Jy sigma=1.178143 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000361987 Jy ! Component: 100 - total flux cleaned = -0.0015886 Jy ! Component: 150 - total flux cleaned = -0.00177504 Jy ! Component: 200 - total flux cleaned = -0.00177473 Jy ! Total flux subtracted in 200 components = -0.00177473 Jy ! Clean residual min=-0.012309 max=0.010150 Jy/beam ! Clean residual mean=0.000016 rms=0.002297 Jy/beam ! Combined flux in latest and established models = 2.13813 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 76 components and 2.13813 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131347Jy sigma=1.172635 ! Fit after self-cal, rms=0.131306Jy sigma=1.172222 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131306Jy sigma=1.172222 ! Fit after self-cal, rms=0.103547Jy sigma=0.911751 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.9361 mas, bmaj=1.113 mas, bpa=-36.15 degrees ! Estimated noise=1.19462 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000280298 Jy ! Component: 100 - total flux cleaned = -7.21852e-05 Jy ! Component: 150 - total flux cleaned = -6.55779e-05 Jy ! Component: 200 - total flux cleaned = -7.30179e-05 Jy ! Total flux subtracted in 200 components = -7.30179e-05 Jy ! Clean residual min=-0.005267 max=0.006153 Jy/beam ! Clean residual mean=0.000017 rms=0.001160 Jy/beam ! Combined flux in latest and established models = 2.13806 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 82 components and 2.13806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102621Jy sigma=0.903658 ! Fit after self-cal, rms=0.102558Jy sigma=0.902913 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (4.6, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00151908 Jy ! Component: 100 - total flux cleaned = 0.00133407 Jy ! Component: 150 - total flux cleaned = 0.000882506 Jy ! Component: 200 - total flux cleaned = 0.000608565 Jy ! Total flux subtracted in 200 components = 0.000608565 Jy ! Clean residual min=-0.005005 max=0.005609 Jy/beam ! Clean residual mean=0.000016 rms=0.001129 Jy/beam ! Combined flux in latest and established models = 2.13866 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 96 components and 2.13867 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101962Jy sigma=0.897124 ! Fit after self-cal, rms=0.101939Jy sigma=0.896815 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (6.8, -21.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00405214 Jy ! Component: 100 - total flux cleaned = 0.00379165 Jy ! Component: 150 - total flux cleaned = 0.00341706 Jy ! Component: 200 - total flux cleaned = 0.00329804 Jy ! Total flux subtracted in 200 components = 0.00329804 Jy ! Clean residual min=-0.004836 max=0.005472 Jy/beam ! Clean residual mean=0.000015 rms=0.001106 Jy/beam ! Combined flux in latest and established models = 2.14196 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 105 components and 2.14196 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101532Jy sigma=0.892265 ! Fit after self-cal, rms=0.101512Jy sigma=0.892014 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-1.2, 4.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0040864 Jy ! Component: 100 - total flux cleaned = 0.00479981 Jy ! Component: 150 - total flux cleaned = 0.00492679 Jy ! Component: 200 - total flux cleaned = 0.00492773 Jy ! Total flux subtracted in 200 components = 0.00492773 Jy ! Clean residual min=-0.004674 max=0.005185 Jy/beam ! Clean residual mean=0.000014 rms=0.001071 Jy/beam ! Combined flux in latest and established models = 2.14689 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 118 components and 2.14689 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101046Jy sigma=0.887480 ! Fit after self-cal, rms=0.101009Jy sigma=0.887175 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-32.2, 30.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00251592 Jy ! Component: 100 - total flux cleaned = 0.00288695 Jy ! Component: 150 - total flux cleaned = 0.00311395 Jy ! Component: 200 - total flux cleaned = 0.00311257 Jy ! Total flux subtracted in 200 components = 0.00311257 Jy ! Clean residual min=-0.004586 max=0.004929 Jy/beam ! Clean residual mean=0.000015 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 2.15 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 131 components and 2.15 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100605Jy sigma=0.883576 ! Fit after self-cal, rms=0.100573Jy sigma=0.883308 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-8.8, -31.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00375709 Jy ! Component: 100 - total flux cleaned = 0.00354243 Jy ! Component: 150 - total flux cleaned = 0.00343995 Jy ! Component: 200 - total flux cleaned = 0.00323757 Jy ! Total flux subtracted in 200 components = 0.00323757 Jy ! Clean residual min=-0.004476 max=0.004935 Jy/beam ! Clean residual mean=0.000015 rms=0.001027 Jy/beam ! Combined flux in latest and established models = 2.15324 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 141 components and 2.15324 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100264Jy sigma=0.880551 ! Fit after self-cal, rms=0.100249Jy sigma=0.880353 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-9, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241993 Jy ! Component: 100 - total flux cleaned = 0.00263819 Jy ! Component: 150 - total flux cleaned = 0.0024392 Jy ! Component: 200 - total flux cleaned = 0.00234375 Jy ! Total flux subtracted in 200 components = 0.00234375 Jy ! Clean residual min=-0.004430 max=0.004727 Jy/beam ! Clean residual mean=0.000015 rms=0.001010 Jy/beam ! Combined flux in latest and established models = 2.15558 Jy ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 158 components and 2.15558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099942Jy sigma=0.877390 ! Fit after self-cal, rms=0.099928Jy sigma=0.877230 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (0.8, -2.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165165 Jy ! Component: 100 - total flux cleaned = 0.00123682 Jy ! Component: 150 - total flux cleaned = 0.00147476 Jy ! Component: 200 - total flux cleaned = 0.00180169 Jy ! Total flux subtracted in 200 components = 0.00180169 Jy ! Clean residual min=-0.004242 max=0.004594 Jy/beam ! Clean residual mean=0.000015 rms=0.000992 Jy/beam ! Combined flux in latest and established models = 2.15738 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 173 components and 2.15738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099504Jy sigma=0.873432 ! Fit after self-cal, rms=0.099474Jy sigma=0.873193 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-8.4, 8.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0041304 Jy ! Component: 100 - total flux cleaned = 0.00482427 Jy ! Component: 150 - total flux cleaned = 0.00492778 Jy ! Component: 200 - total flux cleaned = 0.00473192 Jy ! Total flux subtracted in 200 components = 0.00473192 Jy ! Clean residual min=-0.004156 max=0.004280 Jy/beam ! Clean residual mean=0.000010 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 2.16212 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 182 components and 2.16212 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.099147Jy sigma=0.870350 ! Fit after self-cal, rms=0.099137Jy sigma=0.870199 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-43.4, 20.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00222154 Jy ! Component: 100 - total flux cleaned = 0.00308532 Jy ! Component: 150 - total flux cleaned = 0.00356945 Jy ! Component: 200 - total flux cleaned = 0.00384394 Jy ! Total flux subtracted in 200 components = 0.00384394 Jy ! Clean residual min=-0.004153 max=0.004162 Jy/beam ! Clean residual mean=0.000010 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 2.16596 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 192 components and 2.16596 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098889Jy sigma=0.867853 ! Fit after self-cal, rms=0.098869Jy sigma=0.867726 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098869Jy sigma=0.867726 ! Fit after self-cal, rms=0.098303Jy sigma=0.863172 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=2.423 mas, bmaj=2.812 mas, bpa=-83.95 degrees ! Estimated noise=1.60102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00314178 Jy ! Component: 100 - total flux cleaned = 0.00522282 Jy ! Component: 150 - total flux cleaned = 0.00679898 Jy ! Component: 200 - total flux cleaned = 0.00821046 Jy ! Total flux subtracted in 200 components = 0.00821046 Jy ! Clean residual min=-0.004411 max=0.003783 Jy/beam ! Clean residual mean=0.000026 rms=0.001016 Jy/beam ! Combined flux in latest and established models = 2.17417 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 211 components and 2.17417 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098153Jy sigma=0.861898 ! Fit after self-cal, rms=0.098143Jy sigma=0.861798 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00135485 Jy ! Component: 100 - total flux cleaned = 0.00208634 Jy ! Component: 150 - total flux cleaned = 0.00270745 Jy ! Component: 200 - total flux cleaned = 0.00311647 Jy ! Total flux subtracted in 200 components = 0.00311647 Jy ! Clean residual min=-0.004407 max=0.003750 Jy/beam ! Clean residual mean=0.000024 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 2.17729 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 223 components and 2.17729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098076Jy sigma=0.861152 ! Fit after self-cal, rms=0.098073Jy sigma=0.861124 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.9352 mas, bmaj=1.113 mas, bpa=-36.09 degrees ! Estimated noise=1.19501 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9352 x 1.113 at -36.09 degrees (North through East) ! Clean map min=-0.0043381 max=1.828 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098073Jy sigma=0.861124 ! Fit after self-cal, rms=0.092082Jy sigma=0.710604 ! Inverting map and beam ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.9352 mas, bmaj=1.113 mas, bpa=-36.24 degrees ! Estimated noise=1.19573 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000950241 Jy ! Component: 100 - total flux cleaned = 0.00118018 Jy ! Component: 150 - total flux cleaned = 0.00160007 Jy ! Component: 200 - total flux cleaned = 0.00159811 Jy ! Total flux subtracted in 200 components = 0.00159811 Jy ! Clean residual min=-0.003879 max=0.003751 Jy/beam ! Clean residual mean=0.000011 rms=0.000887 Jy/beam ! Combined flux in latest and established models = 2.17889 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 228 components and 2.17889 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091731Jy sigma=0.707841 ! Fit after self-cal, rms=0.091734Jy sigma=0.707709 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.84162e-05 Jy ! Component: 100 - total flux cleaned = 0.000271477 Jy ! Component: 150 - total flux cleaned = 0.000363289 Jy ! Component: 200 - total flux cleaned = 0.000184932 Jy ! Total flux subtracted in 200 components = 0.000184932 Jy ! Clean residual min=-0.003859 max=0.003740 Jy/beam ! Clean residual mean=0.000011 rms=0.000877 Jy/beam ! Combined flux in latest and established models = 2.17907 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 233 components and 2.17907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091508Jy sigma=0.705937 ! Fit after self-cal, rms=0.091510Jy sigma=0.705894 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.091510Jy sigma=0.705894 ! Fit after self-cal, rms=0.091485Jy sigma=0.705381 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.8245 mas, bmaj=0.9452 mas, bpa=-38.19 degrees ! Estimated noise=1.42041 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.42348 Jy ! Component: 100 - total flux cleaned = 1.74272 Jy ! Component: 150 - total flux cleaned = 1.84904 Jy ! Component: 200 - total flux cleaned = 1.91253 Jy ! Total flux subtracted in 200 components = 1.91253 Jy ! Clean residual min=-0.011277 max=0.035404 Jy/beam ! Clean residual mean=0.000044 rms=0.002710 Jy/beam ! Combined flux in latest and established models = 1.91253 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 1.91253 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.9347 mas, bmaj=1.113 mas, bpa=-36.2 degrees ! Estimated noise=1.19622 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0707855 Jy ! Component: 100 - total flux cleaned = 0.115657 Jy ! Component: 150 - total flux cleaned = 0.14569 Jy ! Component: 200 - total flux cleaned = 0.166491 Jy ! Total flux subtracted in 200 components = 0.166491 Jy ! Clean residual min=-0.006589 max=0.011865 Jy/beam ! Clean residual mean=0.000033 rms=0.001733 Jy/beam ! Combined flux in latest and established models = 2.07902 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 50 components and 2.07902 Jy ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (-2, 1.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0155694 Jy ! Component: 100 - total flux cleaned = 0.0277392 Jy ! Component: 150 - total flux cleaned = 0.0379641 Jy ! Component: 200 - total flux cleaned = 0.0470198 Jy ! Total flux subtracted in 200 components = 0.0470198 Jy ! Clean residual min=-0.005838 max=0.007011 Jy/beam ! Clean residual mean=0.000024 rms=0.001252 Jy/beam ! Combined flux in latest and established models = 2.12604 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 86 components and 2.12604 Jy ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Added new window around map position (0.8, 3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00828543 Jy ! Component: 100 - total flux cleaned = 0.0155593 Jy ! Component: 150 - total flux cleaned = 0.0221083 Jy ! Component: 200 - total flux cleaned = 0.0269128 Jy ! Total flux subtracted in 200 components = 0.0269128 Jy ! Clean residual min=-0.005241 max=0.005222 Jy/beam ! Clean residual mean=0.000018 rms=0.001089 Jy/beam ! Combined flux in latest and established models = 2.15295 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 108 components and 2.15295 Jy ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=2.423 mas, bmaj=2.813 mas, bpa=-83.91 degrees ! Estimated noise=1.60364 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00819998 Jy ! Component: 100 - total flux cleaned = 0.01344 Jy ! Component: 150 - total flux cleaned = 0.0174192 Jy ! Component: 200 - total flux cleaned = 0.0204116 Jy ! Total flux subtracted in 200 components = 0.0204116 Jy ! Clean residual min=-0.004676 max=0.003815 Jy/beam ! Clean residual mean=0.000029 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 2.17336 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00241061 Jy ! Component: 100 - total flux cleaned = 0.00446009 Jy ! Component: 150 - total flux cleaned = 0.00582434 Jy ! Component: 200 - total flux cleaned = 0.00689725 Jy ! Total flux subtracted in 200 components = 0.00689725 Jy ! Clean residual min=-0.004442 max=0.003779 Jy/beam ! Clean residual mean=0.000025 rms=0.001002 Jy/beam ! Combined flux in latest and established models = 2.18026 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 163 components and 2.18026 Jy ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! Estimated beam: bmin=0.9347 mas, bmaj=1.113 mas, bpa=-36.2 degrees ! Estimated noise=1.19622 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000717376 Jy ! Component: 100 - total flux cleaned = 0.00126659 Jy ! Component: 150 - total flux cleaned = 0.00127138 Jy ! Component: 200 - total flux cleaned = 0.00159016 Jy ! Total flux subtracted in 200 components = 0.00159016 Jy ! Clean residual min=-0.004614 max=0.004425 Jy/beam ! Clean residual mean=0.000011 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 2.18185 Jy selfcal ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 189 components and 2.18185 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.093641Jy sigma=0.731487 ! Fit after self-cal, rms=0.093282Jy sigma=0.726321 wmodel J0136+4751_X_map.mod ! Writing 189 model components to file: J0136+4751_X_map.mod wobs J0136+4751_X_uvs.fits ! Writing UV FITS file: J0136+4751_X_uvs.fits wwins J0136+4751_X_map.win ! wwins: Wrote 15 windows to J0136+4751_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000448645 Jy ! Component: 100 - total flux cleaned = 2.51107e-06 Jy ! Component: 150 - total flux cleaned = 0.000367096 Jy ! Component: 200 - total flux cleaned = 0.000794705 Jy ! Component: 250 - total flux cleaned = 0.00114484 Jy ! Component: 300 - total flux cleaned = 0.00155733 Jy ! Component: 350 - total flux cleaned = 0.0018274 Jy ! Component: 400 - total flux cleaned = 0.00236012 Jy ! Component: 450 - total flux cleaned = 0.0028207 Jy ! Component: 500 - total flux cleaned = 0.00321053 Jy ! Component: 550 - total flux cleaned = 0.00359613 Jy ! Component: 600 - total flux cleaned = 0.00384997 Jy ! Component: 650 - total flux cleaned = 0.00397582 Jy ! Component: 700 - total flux cleaned = 0.00428821 Jy ! Component: 750 - total flux cleaned = 0.00459757 Jy ! Component: 800 - total flux cleaned = 0.00496469 Jy ! Component: 850 - total flux cleaned = 0.00496467 Jy ! Component: 900 - total flux cleaned = 0.00532664 Jy ! Component: 950 - total flux cleaned = 0.00562545 Jy ! Component: 1000 - total flux cleaned = 0.00580334 Jy ! Component: 1050 - total flux cleaned = 0.00603951 Jy ! Component: 1100 - total flux cleaned = 0.0062737 Jy ! Component: 1150 - total flux cleaned = 0.00667943 Jy ! Component: 1200 - total flux cleaned = 0.00696778 Jy ! Component: 1250 - total flux cleaned = 0.00696777 Jy ! Component: 1300 - total flux cleaned = 0.00742288 Jy ! Component: 1350 - total flux cleaned = 0.00747923 Jy ! Component: 1400 - total flux cleaned = 0.00787186 Jy ! Component: 1450 - total flux cleaned = 0.00803947 Jy ! Component: 1500 - total flux cleaned = 0.00820587 Jy ! Component: 1550 - total flux cleaned = 0.0084816 Jy ! Component: 1600 - total flux cleaned = 0.0085367 Jy ! Component: 1650 - total flux cleaned = 0.00902754 Jy ! Component: 1700 - total flux cleaned = 0.00924453 Jy ! Component: 1750 - total flux cleaned = 0.00951342 Jy ! Component: 1800 - total flux cleaned = 0.00945979 Jy ! Component: 1850 - total flux cleaned = 0.00977987 Jy ! Component: 1900 - total flux cleaned = 0.0101517 Jy ! Component: 1950 - total flux cleaned = 0.0102049 Jy ! Component: 2000 - total flux cleaned = 0.0106777 Jy ! Component: 2050 - total flux cleaned = 0.0106777 Jy ! Component: 2100 - total flux cleaned = 0.0110941 Jy ! Component: 2150 - total flux cleaned = 0.0113015 Jy ! Component: 2200 - total flux cleaned = 0.0114047 Jy ! Component: 2250 - total flux cleaned = 0.0118155 Jy ! Component: 2300 - total flux cleaned = 0.0117645 Jy ! Component: 2350 - total flux cleaned = 0.0121206 Jy ! Component: 2400 - total flux cleaned = 0.012374 Jy ! Component: 2450 - total flux cleaned = 0.0123241 Jy ! Component: 2500 - total flux cleaned = 0.0125754 Jy ! Component: 2550 - total flux cleaned = 0.0130757 Jy ! Component: 2600 - total flux cleaned = 0.0132251 Jy ! Component: 2650 - total flux cleaned = 0.0131258 Jy ! Component: 2700 - total flux cleaned = 0.013521 Jy ! Component: 2750 - total flux cleaned = 0.0136689 Jy ! Component: 2800 - total flux cleaned = 0.0136689 Jy ! Component: 2850 - total flux cleaned = 0.0140107 Jy ! Component: 2900 - total flux cleaned = 0.0140104 Jy ! Component: 2950 - total flux cleaned = 0.0143492 Jy ! Component: 3000 - total flux cleaned = 0.0145903 Jy ! Component: 3050 - total flux cleaned = 0.0147343 Jy ! Component: 3100 - total flux cleaned = 0.0146386 Jy ! Component: 3150 - total flux cleaned = 0.0150681 Jy ! Component: 3200 - total flux cleaned = 0.0153058 Jy ! Component: 3250 - total flux cleaned = 0.015684 Jy ! Component: 3300 - total flux cleaned = 0.015731 Jy ! Component: 3350 - total flux cleaned = 0.0159189 Jy ! Component: 3400 - total flux cleaned = 0.0161529 Jy ! Component: 3450 - total flux cleaned = 0.0162464 Jy ! Component: 3500 - total flux cleaned = 0.0162928 Jy ! Component: 3550 - total flux cleaned = 0.0163851 Jy ! Component: 3600 - total flux cleaned = 0.0167077 Jy ! Component: 3650 - total flux cleaned = 0.0170295 Jy ! Component: 3700 - total flux cleaned = 0.0171214 Jy ! Component: 3750 - total flux cleaned = 0.0173955 Jy ! Component: 3800 - total flux cleaned = 0.0172588 Jy ! Component: 3850 - total flux cleaned = 0.0174853 Jy ! Component: 3900 - total flux cleaned = 0.0178466 Jy ! Component: 3950 - total flux cleaned = 0.0180718 Jy ! Component: 4000 - total flux cleaned = 0.0179821 Jy ! Component: 4050 - total flux cleaned = 0.0181162 Jy ! Total flux subtracted in 4096 components = 0.0182943 Jy ! Clean residual min=-0.002703 max=0.002799 Jy/beam ! Clean residual mean=0.000005 rms=0.000734 Jy/beam ! Combined flux in latest and established models = 2.20014 Jy keep ! Adding 360 model components to the UV plane model. ! The established model now contains 547 components and 2.20014 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv125_uvs/J0136+4751_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9347 x 1.113 at -36.2 degrees (North through East) ! Clean map min=-0.0035294 max=1.8328 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv125_uvs/J0136+4751_X_map.fits wmodel /scr/pima/rv125_uvs/J0136+4751_X_map.mod ! Writing 547 model components to file: /scr/pima/rv125_uvs/J0136+4751_X_map.mod wobs /scr/pima/rv125_uvs/J0136+4751_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv125_uvs/J0136+4751_X_uvs.fits wwins /scr/pima/rv125_uvs/J0136+4751_X_map.win ! wwins: Wrote 16 windows to /scr/pima/rv125_uvs/J0136+4751_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.83283 invert ! Inverting map ! Your choice of large map pixels excluded 0.601% of the data. ! The x-axis pixel size should ideally be below 0.1642 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000734186 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.120172 0.120172 0.240345 0.480689 0.961378 1.92276 3.84551 7.69103 15.3821 30.7641 61.5282 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0022 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.832 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 2496.42 quit ! Quitting program ! Log file /scr/pima/rv125_uvs/J0136+4751_X_dfm.log closed on Sun Dec 23 02:48:48 2018