! Started logfile: /scr/pima/rv124_uvs/J2038+5119_S_dfm.log on Mon Dec 24 01:44:03 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv124_uvs/J2038+5119_S_uva.fits ! Reading UV FITS file: /scr/pima/rv124_uvs/J2038+5119_S_uva.fits ! AN table 1: 18 integrations on 28 of 28 possible baselines. ! AN table 2: 3 integrations on 36 of 36 possible baselines. ! AN table 3: 7 integrations on 55 of 55 possible baselines. ! AN table 4: 3 integrations on 28 of 28 possible baselines. ! AN table 5: 10 integrations on 55 of 55 possible baselines. ! AN table 6: 88 integrations on 66 of 66 possible baselines. ! Apparent sampling: 0.27907 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2038+5119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 8304 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2038+5119_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 61 telescope corrections were flagged in sub-array 5. ! A total of 838 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 61 telescope corrections were flagged in sub-array 5. ! A total of 838 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 144 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 77 telescope corrections were flagged in sub-array 3. ! A total of 24 telescope corrections were flagged in sub-array 4. ! A total of 110 telescope corrections were flagged in sub-array 5. ! A total of 1056 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! A total of 9 telescope corrections were flagged in sub-array 2. ! A total of 49 telescope corrections were flagged in sub-array 3. ! A total of 8 telescope corrections were flagged in sub-array 4. ! A total of 61 telescope corrections were flagged in sub-array 5. ! A total of 838 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=2.729360Jy sigma=21.589162 ! Fit after self-cal, rms=1.743645Jy sigma=12.088183 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.293 mas, bmaj=3.02 mas, bpa=40.06 degrees ! Estimated noise=1.64006 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.3717 Jy ! Component: 100 - total flux cleaned = 1.84296 Jy ! Total flux subtracted in 100 components = 1.84296 Jy ! Clean residual min=-0.070355 max=0.241923 Jy/beam ! Clean residual mean=0.000506 rms=0.017879 Jy/beam ! Combined flux in latest and established models = 1.84296 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 1.84296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.224930Jy sigma=7.964074 ! Fit after self-cal, rms=1.224573Jy sigma=7.963265 ! Inverting map ! Added new window around map position (-4, -5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.297711 Jy ! Component: 100 - total flux cleaned = 0.513431 Jy ! Total flux subtracted in 100 components = 0.513431 Jy ! Clean residual min=-0.060458 max=0.131622 Jy/beam ! Clean residual mean=0.000446 rms=0.014122 Jy/beam ! Combined flux in latest and established models = 2.35639 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 38 components and 2.35639 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.997231Jy sigma=6.491660 ! Fit after self-cal, rms=0.995643Jy sigma=6.461227 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.175785 Jy ! Component: 100 - total flux cleaned = 0.31054 Jy ! Total flux subtracted in 100 components = 0.31054 Jy ! Clean residual min=-0.055693 max=0.093862 Jy/beam ! Clean residual mean=0.000412 rms=0.012285 Jy/beam ! Combined flux in latest and established models = 2.66693 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 57 components and 2.66693 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.889410Jy sigma=5.913545 ! Fit after self-cal, rms=0.888411Jy sigma=5.892263 ! Inverting map ! Added new window around map position (-7, -6.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.118365 Jy ! Component: 100 - total flux cleaned = 0.209409 Jy ! Total flux subtracted in 100 components = 0.209409 Jy ! Clean residual min=-0.052658 max=0.068679 Jy/beam ! Clean residual mean=0.000389 rms=0.011313 Jy/beam ! Combined flux in latest and established models = 2.87634 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 68 components and 2.87634 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.833632Jy sigma=5.690792 ! Fit after self-cal, rms=0.833140Jy sigma=5.680580 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.829 mas, bmaj=3.702 mas, bpa=48.88 degrees ! Estimated noise=1.34124 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115108 Jy ! Component: 100 - total flux cleaned = 0.188688 Jy ! Component: 150 - total flux cleaned = 0.23828 Jy ! Component: 200 - total flux cleaned = 0.271916 Jy ! Total flux subtracted in 200 components = 0.271916 Jy ! Clean residual min=-0.084681 max=0.086951 Jy/beam ! Clean residual mean=0.001643 rms=0.022123 Jy/beam ! Combined flux in latest and established models = 3.14825 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 84 components and 3.14825 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.785841Jy sigma=5.607148 ! Fit after self-cal, rms=0.785287Jy sigma=5.594497 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.829 x 3.702 at 48.88 degrees (North through East) ! Clean map min=-0.079067 max=1.8427 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.93 KP 0.89 LA 0.87 MK 0.99 ! NL 1.32 OV 0.94 PT 1.05 YG 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.14 FD 1.08 HN 0.87 KP 0.92 ! LA 0.84 NL 1.09 OV 0.94 PT 0.96 ! WZ 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.10 HN 0.88 KP 0.90 LA 0.88 ! NL 1.04 NY 1.47 OV 0.93 PT 1.03 ! SC 0.94 WN 1.00* WZ 0.93 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.97 FD 1.07 HN 0.94 KP 0.91 ! LA 0.90 NL 1.06 OV 0.86 SC 0.85 ! ! A total of 9 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 0.97 HN 0.97 KP 0.91 ! MK 1.11 NL 1.16 NY 1.39 OV 0.86 ! PT 0.96 SC 0.94 WZ 1.04 ! ! A total of 72 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.99 FD 1.09 HN 0.96 KP 0.88 ! MK 1.12 NL 1.18 NY 1.37 OV 0.86 ! PT 1.03 WN 1.00* WZ 1.05 YG 1.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 KP 1.12 LA 0.88 MK 0.95 ! NL 1.13 OV 2.38 PT 1.04 YG 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 1.10 HN 0.87 KP 0.92 ! LA 0.88 NL 1.07 OV 0.76 PT 1.03 ! WZ 0.84 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.16 HN 0.89 KP 0.91 LA 0.83 ! NL 1.05 NY 1.29 OV 0.76 PT 0.95 ! SC 0.89 WN 1.00* WZ 0.85 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.92 FD 1.07 HN 0.90 KP 0.93 ! LA 0.87 NL 1.08 OV 0.73 SC 0.77 ! ! A total of 9 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.04 FD 1.05 HN 0.93 KP 0.89 ! MK 1.03 NL 1.12 NY 1.26 OV 0.72 ! PT 0.99 SC 0.87 WZ 0.96 ! ! A total of 72 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.96 FD 1.18 HN 1.00 KP 0.86 ! MK 1.16 NL 1.13 NY 1.21 OV 0.86 ! PT 0.96 WN 1.00* WZ 0.97 YG 1.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* KP 0.00* LA 0.00* MK 0.00* ! NL 0.00* OV 0.00* PT 0.00* YG 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* PT 0.00* ! WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! FD 0.00* HN 0.00* KP 0.00* LA 0.00* ! NL 0.00* NY 0.00* OV 0.00* PT 0.00* ! SC 0.00* WN 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* NL 0.00* OV 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! PT 0.00* WN 0.00* WZ 0.00* YG 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 KP 0.58 LA 0.90 MK 0.94 ! NL 1.09 OV 1.25 PT 1.09 YG 1.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 1.08 HN 0.85 KP 0.93 ! LA 0.85 NL 1.07 OV 0.91 PT 1.01 ! WZ 0.69 ! ! Telescope amplitude corrections in sub-array 3: ! FD 1.10 HN 0.91 KP 0.90 LA 0.88 ! NL 1.04 NY 1.27 OV 0.91 PT 1.02 ! SC 0.91 WN 1.00* WZ 0.80 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.86 FD 1.05 HN 0.91 KP 0.93 ! LA 0.89 NL 1.06 OV 0.84 SC 0.80 ! ! A total of 9 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.01 FD 1.01 HN 0.94 KP 0.91 ! MK 1.05 NL 1.13 NY 1.23 OV 0.86 ! PT 1.00 SC 0.89 WZ 0.94 ! ! A total of 72 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 0.97 FD 1.12 HN 0.95 KP 0.88 ! MK 1.05 NL 1.10 NY 1.19 OV 0.90 ! PT 1.04 WN 1.00* WZ 0.85 YG 1.00* ! ! ! Fit before self-cal, rms=0.785287Jy sigma=5.594497 ! Fit after self-cal, rms=0.425836Jy sigma=2.958440 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.856 mas, bmaj=3.813 mas, bpa=47.29 degrees ! Estimated noise=1.40372 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12.5, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0571029 Jy ! Component: 100 - total flux cleaned = 0.0952722 Jy ! Component: 150 - total flux cleaned = 0.119559 Jy ! Component: 200 - total flux cleaned = 0.126656 Jy ! Total flux subtracted in 200 components = 0.126656 Jy ! Clean residual min=-0.028764 max=0.036195 Jy/beam ! Clean residual mean=0.000299 rms=0.008203 Jy/beam ! Combined flux in latest and established models = 3.27491 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 110 components and 3.27491 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410863Jy sigma=2.880864 ! Fit after self-cal, rms=0.410039Jy sigma=2.867711 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.410039Jy sigma=2.867711 ! Fit after self-cal, rms=0.484386Jy sigma=2.545814 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.851 mas, bmaj=3.812 mas, bpa=48.25 degrees ! Estimated noise=1.40748 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0408572 Jy ! Component: 100 - total flux cleaned = 0.0678563 Jy ! Component: 150 - total flux cleaned = 0.0770739 Jy ! Component: 200 - total flux cleaned = 0.0834598 Jy ! Total flux subtracted in 200 components = 0.0834598 Jy ! Clean residual min=-0.023494 max=0.030364 Jy/beam ! Clean residual mean=0.000306 rms=0.006460 Jy/beam ! Combined flux in latest and established models = 3.35837 Jy selfcal ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 125 components and 3.35837 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.476393Jy sigma=2.504540 ! Fit after self-cal, rms=0.476051Jy sigma=2.495716 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7, -23.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0318868 Jy ! Component: 100 - total flux cleaned = 0.0511959 Jy ! Component: 150 - total flux cleaned = 0.0592353 Jy ! Component: 200 - total flux cleaned = 0.0655107 Jy ! Total flux subtracted in 200 components = 0.0655107 Jy ! Clean residual min=-0.022774 max=0.024493 Jy/beam ! Clean residual mean=0.000237 rms=0.005800 Jy/beam ! Combined flux in latest and established models = 3.42388 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 148 components and 3.42388 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.471204Jy sigma=2.469940 ! Fit after self-cal, rms=0.471075Jy sigma=2.466029 ! Inverting map ! Added new window around map position (-6, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0176224 Jy ! Component: 100 - total flux cleaned = 0.0228638 Jy ! Component: 150 - total flux cleaned = 0.027884 Jy ! Component: 200 - total flux cleaned = 0.0319203 Jy ! Total flux subtracted in 200 components = 0.0319203 Jy ! Clean residual min=-0.021965 max=0.023708 Jy/beam ! Clean residual mean=0.000193 rms=0.005597 Jy/beam ! Combined flux in latest and established models = 3.4558 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 161 components and 3.4558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.468615Jy sigma=2.451027 ! Fit after self-cal, rms=0.468581Jy sigma=2.448554 ! Inverting map ! Added new window around map position (68, -22.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240983 Jy ! Component: 100 - total flux cleaned = 0.0382423 Jy ! Component: 150 - total flux cleaned = 0.0465109 Jy ! Component: 200 - total flux cleaned = 0.0525278 Jy ! Total flux subtracted in 200 components = 0.0525278 Jy ! Clean residual min=-0.020855 max=0.021874 Jy/beam ! Clean residual mean=0.000180 rms=0.005223 Jy/beam ! Combined flux in latest and established models = 3.50833 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 197 components and 3.50833 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.465629Jy sigma=2.434663 ! Fit after self-cal, rms=0.465466Jy sigma=2.432504 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.465466Jy sigma=2.432504 ! Fit after self-cal, rms=0.247485Jy sigma=1.656186 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.858 mas, bmaj=3.806 mas, bpa=48.17 degrees ! Estimated noise=1.4104 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0150846 Jy ! Component: 100 - total flux cleaned = 0.0194629 Jy ! Component: 150 - total flux cleaned = 0.0237211 Jy ! Component: 200 - total flux cleaned = 0.0274872 Jy ! Total flux subtracted in 200 components = 0.0274872 Jy ! Clean residual min=-0.012575 max=0.018138 Jy/beam ! Clean residual mean=0.000177 rms=0.003299 Jy/beam ! Combined flux in latest and established models = 3.53582 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 212 components and 3.53582 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244451Jy sigma=1.636493 ! Fit after self-cal, rms=0.244446Jy sigma=1.634193 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-15, -39.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0184861 Jy ! Component: 100 - total flux cleaned = 0.0304096 Jy ! Component: 150 - total flux cleaned = 0.0366613 Jy ! Component: 200 - total flux cleaned = 0.041861 Jy ! Total flux subtracted in 200 components = 0.041861 Jy ! Clean residual min=-0.011479 max=0.015215 Jy/beam ! Clean residual mean=0.000151 rms=0.002994 Jy/beam ! Combined flux in latest and established models = 3.57768 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 233 components and 3.57768 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241512Jy sigma=1.616116 ! Fit after self-cal, rms=0.241304Jy sigma=1.614638 ! Inverting map ! Added new window around map position (-12.5, -106.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0153923 Jy ! Component: 100 - total flux cleaned = 0.0259379 Jy ! Component: 150 - total flux cleaned = 0.033806 Jy ! Component: 200 - total flux cleaned = 0.0396087 Jy ! Total flux subtracted in 200 components = 0.0396087 Jy ! Clean residual min=-0.010727 max=0.010934 Jy/beam ! Clean residual mean=0.000123 rms=0.002805 Jy/beam ! Combined flux in latest and established models = 3.61729 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 252 components and 3.61728 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.239027Jy sigma=1.599790 ! Fit after self-cal, rms=0.238932Jy sigma=1.599057 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.238932Jy sigma=1.599057 ! Fit after self-cal, rms=0.237453Jy sigma=1.567524 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.061 mas, bmaj=10.9 mas, bpa=64.48 degrees ! Estimated noise=2.21132 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.020617 Jy ! Component: 100 - total flux cleaned = 0.036853 Jy ! Component: 150 - total flux cleaned = 0.0502621 Jy ! Component: 200 - total flux cleaned = 0.0614137 Jy ! Total flux subtracted in 200 components = 0.0614137 Jy ! Clean residual min=-0.013881 max=0.015906 Jy/beam ! Clean residual mean=0.000271 rms=0.004590 Jy/beam ! Combined flux in latest and established models = 3.6787 Jy selfcal ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 281 components and 3.6787 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.235314Jy sigma=1.564010 ! Fit after self-cal, rms=0.235203Jy sigma=1.562171 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0110612 Jy ! Component: 100 - total flux cleaned = 0.019036 Jy ! Component: 150 - total flux cleaned = 0.023108 Jy ! Component: 200 - total flux cleaned = 0.027002 Jy ! Total flux subtracted in 200 components = 0.027002 Jy ! Clean residual min=-0.013259 max=0.015408 Jy/beam ! Clean residual mean=0.000192 rms=0.004434 Jy/beam ! Combined flux in latest and established models = 3.7057 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 298 components and 3.7057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234605Jy sigma=1.563751 ! Fit after self-cal, rms=0.234578Jy sigma=1.563300 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=3.804 mas, bpa=48.15 degrees ! Estimated noise=1.41239 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.86 x 3.804 at 48.15 degrees (North through East) ! Clean map min=-0.0097778 max=1.8696 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.234578Jy sigma=1.563300 ! Fit after self-cal, rms=0.116143Jy sigma=0.873801 ! Inverting map and beam ! Estimated beam: bmin=2.86 mas, bmaj=3.804 mas, bpa=48.22 degrees ! Estimated noise=1.41163 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00303564 Jy ! Component: 100 - total flux cleaned = -0.00301502 Jy ! Component: 150 - total flux cleaned = -0.00207344 Jy ! Component: 200 - total flux cleaned = -0.00120515 Jy ! Total flux subtracted in 200 components = -0.00120515 Jy ! Clean residual min=-0.009268 max=0.010017 Jy/beam ! Clean residual mean=0.000084 rms=0.002130 Jy/beam ! Combined flux in latest and established models = 3.7045 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 308 components and 3.7045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114406Jy sigma=0.855691 ! Fit after self-cal, rms=0.114347Jy sigma=0.854937 ! Inverting map ! Added new window around map position (-6, -17). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00487087 Jy ! Component: 100 - total flux cleaned = 0.00545354 Jy ! Component: 150 - total flux cleaned = 0.00544988 Jy ! Component: 200 - total flux cleaned = 0.00621456 Jy ! Total flux subtracted in 200 components = 0.00621456 Jy ! Clean residual min=-0.009074 max=0.010065 Jy/beam ! Clean residual mean=0.000076 rms=0.002091 Jy/beam ! Combined flux in latest and established models = 3.71071 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 324 components and 3.71071 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112869Jy sigma=0.841550 ! Fit after self-cal, rms=0.112808Jy sigma=0.840672 ! Inverting map ! Added new window around map position (-19, -120.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00774111 Jy ! Component: 100 - total flux cleaned = 0.0116103 Jy ! Component: 150 - total flux cleaned = 0.0138968 Jy ! Component: 200 - total flux cleaned = 0.0158257 Jy ! Total flux subtracted in 200 components = 0.0158257 Jy ! Clean residual min=-0.008724 max=0.008827 Jy/beam ! Clean residual mean=0.000066 rms=0.002018 Jy/beam ! Combined flux in latest and established models = 3.72654 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 338 components and 3.72654 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111197Jy sigma=0.828739 ! Fit after self-cal, rms=0.111105Jy sigma=0.827978 ! Inverting map ! Added new window around map position (59.5, 4.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00627734 Jy ! Component: 100 - total flux cleaned = 0.00972195 Jy ! Component: 150 - total flux cleaned = 0.0122693 Jy ! Component: 200 - total flux cleaned = 0.0140351 Jy ! Total flux subtracted in 200 components = 0.0140351 Jy ! Clean residual min=-0.008418 max=0.008721 Jy/beam ! Clean residual mean=0.000055 rms=0.001963 Jy/beam ! Combined flux in latest and established models = 3.74057 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 349 components and 3.74057 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109950Jy sigma=0.817801 ! Fit after self-cal, rms=0.109901Jy sigma=0.817262 ! Inverting map ! Added new window around map position (87.5, 13.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00732848 Jy ! Component: 100 - total flux cleaned = 0.0112306 Jy ! Component: 150 - total flux cleaned = 0.0127959 Jy ! Component: 200 - total flux cleaned = 0.0138632 Jy ! Total flux subtracted in 200 components = 0.0138632 Jy ! Clean residual min=-0.008375 max=0.008389 Jy/beam ! Clean residual mean=0.000051 rms=0.001877 Jy/beam ! Combined flux in latest and established models = 3.75443 Jy ! Performing phase self-cal ! Adding 44 model components to the UV plane model. ! The established model now contains 365 components and 3.75443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108750Jy sigma=0.806546 ! Fit after self-cal, rms=0.108662Jy sigma=0.805900 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108662Jy sigma=0.805900 ! Fit after self-cal, rms=0.107755Jy sigma=0.799667 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.324 mas, bmaj=3.136 mas, bpa=37.94 degrees ! Estimated noise=1.69211 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.39011 Jy ! Component: 100 - total flux cleaned = 1.86158 Jy ! Component: 150 - total flux cleaned = 2.16952 Jy ! Component: 200 - total flux cleaned = 2.39359 Jy ! Total flux subtracted in 200 components = 2.39359 Jy ! Clean residual min=-0.031081 max=0.128421 Jy/beam ! Clean residual mean=0.000269 rms=0.009402 Jy/beam ! Combined flux in latest and established models = 2.39359 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 44 model components to the UV plane model. ! The established model now contains 44 components and 2.39359 Jy ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=3.805 mas, bpa=48.21 degrees ! Estimated noise=1.41279 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.320789 Jy ! Component: 100 - total flux cleaned = 0.518048 Jy ! Component: 150 - total flux cleaned = 0.648417 Jy ! Component: 200 - total flux cleaned = 0.74279 Jy ! Total flux subtracted in 200 components = 0.74279 Jy ! Clean residual min=-0.022235 max=0.055775 Jy/beam ! Clean residual mean=0.000694 rms=0.008801 Jy/beam ! Combined flux in latest and established models = 3.13638 Jy ! Adding 100 model components to the UV plane model. ! The established model now contains 128 components and 3.13638 Jy ! Inverting map ! Added new window around map position (-4, -2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0727675 Jy ! Component: 100 - total flux cleaned = 0.129941 Jy ! Component: 150 - total flux cleaned = 0.175759 Jy ! Component: 200 - total flux cleaned = 0.213425 Jy ! Total flux subtracted in 200 components = 0.213425 Jy ! Clean residual min=-0.014066 max=0.025136 Jy/beam ! Clean residual mean=0.000411 rms=0.004868 Jy/beam ! Combined flux in latest and established models = 3.34981 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 193 components and 3.34981 Jy ! Inverting map ! Added new window around map position (-13.5, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0323344 Jy ! Component: 100 - total flux cleaned = 0.0600512 Jy ! Component: 150 - total flux cleaned = 0.0842087 Jy ! Component: 200 - total flux cleaned = 0.105664 Jy ! Total flux subtracted in 200 components = 0.105664 Jy ! Clean residual min=-0.011775 max=0.017256 Jy/beam ! Clean residual mean=0.000301 rms=0.003532 Jy/beam ! Combined flux in latest and established models = 3.45547 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 233 components and 3.45547 Jy ! Inverting map ! Added new window around map position (-12.5, -30.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0203454 Jy ! Component: 100 - total flux cleaned = 0.0383444 Jy ! Component: 150 - total flux cleaned = 0.0549046 Jy ! Component: 200 - total flux cleaned = 0.0702673 Jy ! Total flux subtracted in 200 components = 0.0702673 Jy ! Clean residual min=-0.009943 max=0.011641 Jy/beam ! Clean residual mean=0.000243 rms=0.002899 Jy/beam ! Combined flux in latest and established models = 3.52574 Jy ! Adding 78 model components to the UV plane model. ! The established model now contains 281 components and 3.52574 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.063 mas, bmaj=10.9 mas, bpa=64.63 degrees ! Estimated noise=2.20808 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0302653 Jy ! Component: 100 - total flux cleaned = 0.0552325 Jy ! Component: 150 - total flux cleaned = 0.0768786 Jy ! Component: 200 - total flux cleaned = 0.0959299 Jy ! Total flux subtracted in 200 components = 0.0959299 Jy ! Clean residual min=-0.013486 max=0.013318 Jy/beam ! Clean residual mean=0.000446 rms=0.004559 Jy/beam ! Combined flux in latest and established models = 3.62167 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.017069 Jy ! Component: 100 - total flux cleaned = 0.032486 Jy ! Component: 150 - total flux cleaned = 0.0464781 Jy ! Component: 200 - total flux cleaned = 0.0592181 Jy ! Total flux subtracted in 200 components = 0.0592181 Jy ! Clean residual min=-0.011906 max=0.012548 Jy/beam ! Clean residual mean=0.000342 rms=0.003754 Jy/beam ! Combined flux in latest and established models = 3.68089 Jy ! Adding 219 model components to the UV plane model. ! The established model now contains 486 components and 3.68089 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.864 mas, bmaj=3.805 mas, bpa=48.21 degrees ! Estimated noise=1.41279 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322226 Jy ! Component: 100 - total flux cleaned = 0.00867224 Jy ! Component: 150 - total flux cleaned = 0.0139754 Jy ! Component: 200 - total flux cleaned = 0.0195486 Jy ! Total flux subtracted in 200 components = 0.0195486 Jy ! Clean residual min=-0.007462 max=0.007905 Jy/beam ! Clean residual mean=0.000106 rms=0.001914 Jy/beam ! Combined flux in latest and established models = 3.70044 Jy selfcal ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 513 components and 3.70044 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.106784Jy sigma=0.783379 ! Fit after self-cal, rms=0.105960Jy sigma=0.771353 wmodel J2038+5119_S_map.mod ! Writing 513 model components to file: J2038+5119_S_map.mod wobs J2038+5119_S_uvs.fits ! Writing UV FITS file: J2038+5119_S_uvs.fits wwins J2038+5119_S_map.win ! wwins: Wrote 16 windows to J2038+5119_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00132151 Jy ! Component: 100 - total flux cleaned = 0.00159295 Jy ! Component: 150 - total flux cleaned = 0.00120531 Jy ! Component: 200 - total flux cleaned = 0.000703392 Jy ! Component: 250 - total flux cleaned = 0.000214029 Jy ! Component: 300 - total flux cleaned = -0.000147056 Jy ! Component: 350 - total flux cleaned = -0.000737956 Jy ! Component: 400 - total flux cleaned = -0.000968285 Jy ! Component: 450 - total flux cleaned = -0.00108036 Jy ! Component: 500 - total flux cleaned = -0.000967044 Jy ! Component: 550 - total flux cleaned = -0.000967874 Jy ! Component: 600 - total flux cleaned = -0.00096927 Jy ! Component: 650 - total flux cleaned = -0.000970821 Jy ! Component: 700 - total flux cleaned = -0.0011837 Jy ! Component: 750 - total flux cleaned = -0.00107735 Jy ! Component: 800 - total flux cleaned = -0.00107638 Jy ! Component: 850 - total flux cleaned = -0.000972442 Jy ! Component: 900 - total flux cleaned = -0.000767749 Jy ! Component: 950 - total flux cleaned = -0.00056697 Jy ! Component: 1000 - total flux cleaned = -0.000268234 Jy ! Component: 1050 - total flux cleaned = -7.1559e-05 Jy ! Component: 1100 - total flux cleaned = -0.000167328 Jy ! Component: 1150 - total flux cleaned = 0.000510928 Jy ! Component: 1200 - total flux cleaned = 0.000989343 Jy ! Component: 1250 - total flux cleaned = 0.000989503 Jy ! Component: 1300 - total flux cleaned = 0.00183556 Jy ! Component: 1350 - total flux cleaned = 0.00202251 Jy ! Component: 1400 - total flux cleaned = 0.00220805 Jy ! Component: 1450 - total flux cleaned = 0.0030331 Jy ! Component: 1500 - total flux cleaned = 0.00303235 Jy ! Component: 1550 - total flux cleaned = 0.00348274 Jy ! Component: 1600 - total flux cleaned = 0.00401929 Jy ! Component: 1650 - total flux cleaned = 0.00428526 Jy ! Component: 1700 - total flux cleaned = 0.00472621 Jy ! Component: 1750 - total flux cleaned = 0.00481258 Jy ! Component: 1800 - total flux cleaned = 0.00507427 Jy ! Component: 1850 - total flux cleaned = 0.00541953 Jy ! Component: 1900 - total flux cleaned = 0.00559185 Jy ! Component: 1950 - total flux cleaned = 0.00601763 Jy ! Component: 2000 - total flux cleaned = 0.00610199 Jy ! Component: 2050 - total flux cleaned = 0.00618641 Jy ! Component: 2100 - total flux cleaned = 0.00643663 Jy ! Component: 2150 - total flux cleaned = 0.0066845 Jy ! Component: 2200 - total flux cleaned = 0.00684927 Jy ! Component: 2250 - total flux cleaned = 0.00693187 Jy ! Component: 2300 - total flux cleaned = 0.00717593 Jy ! Component: 2350 - total flux cleaned = 0.00733689 Jy ! Component: 2400 - total flux cleaned = 0.00725693 Jy ! Component: 2450 - total flux cleaned = 0.00733669 Jy ! Component: 2500 - total flux cleaned = 0.00765546 Jy ! Component: 2550 - total flux cleaned = 0.00773475 Jy ! Component: 2600 - total flux cleaned = 0.00789238 Jy ! Component: 2650 - total flux cleaned = 0.00820629 Jy ! Component: 2700 - total flux cleaned = 0.00828437 Jy ! Component: 2750 - total flux cleaned = 0.00812999 Jy ! Component: 2800 - total flux cleaned = 0.00843951 Jy ! Component: 2850 - total flux cleaned = 0.00851616 Jy ! Component: 2900 - total flux cleaned = 0.00851671 Jy ! Component: 2950 - total flux cleaned = 0.00851682 Jy ! Component: 3000 - total flux cleaned = 0.0087434 Jy ! Component: 3050 - total flux cleaned = 0.00896893 Jy ! Component: 3100 - total flux cleaned = 0.00911916 Jy ! Component: 3150 - total flux cleaned = 0.00934209 Jy ! Component: 3200 - total flux cleaned = 0.00941536 Jy ! Component: 3250 - total flux cleaned = 0.00919478 Jy ! Component: 3300 - total flux cleaned = 0.00941513 Jy ! Component: 3350 - total flux cleaned = 0.00956113 Jy ! Component: 3400 - total flux cleaned = 0.00977913 Jy ! Component: 3450 - total flux cleaned = 0.00985124 Jy ! Component: 3500 - total flux cleaned = 0.00977954 Jy ! Component: 3550 - total flux cleaned = 0.0099935 Jy ! Component: 3600 - total flux cleaned = 0.010065 Jy ! Component: 3650 - total flux cleaned = 0.0105615 Jy ! Component: 3700 - total flux cleaned = 0.0104911 Jy ! Component: 3750 - total flux cleaned = 0.0106315 Jy ! Component: 3800 - total flux cleaned = 0.0106315 Jy ! Component: 3850 - total flux cleaned = 0.0106315 Jy ! Component: 3900 - total flux cleaned = 0.010978 Jy ! Component: 3950 - total flux cleaned = 0.0110474 Jy ! Component: 4000 - total flux cleaned = 0.011116 Jy ! Component: 4050 - total flux cleaned = 0.0108425 Jy ! Total flux subtracted in 4096 components = 0.0110467 Jy ! Clean residual min=-0.003481 max=0.003796 Jy/beam ! Clean residual mean=0.000074 rms=0.001203 Jy/beam ! Combined flux in latest and established models = 3.71148 Jy keep ! Adding 318 model components to the UV plane model. ! The established model now contains 823 components and 3.71148 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv124_uvs/J2038+5119_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.864 x 3.805 at 48.21 degrees (North through East) ! Clean map min=-0.0058129 max=1.8801 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv124_uvs/J2038+5119_S_map.fits wmodel /scr/pima/rv124_uvs/J2038+5119_S_map.mod ! Writing 823 model components to file: /scr/pima/rv124_uvs/J2038+5119_S_map.mod wobs /scr/pima/rv124_uvs/J2038+5119_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv124_uvs/J2038+5119_S_uvs.fits wwins /scr/pima/rv124_uvs/J2038+5119_S_map.win ! wwins: Wrote 17 windows to /scr/pima/rv124_uvs/J2038+5119_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.88014 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00120047 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.19155 0.19155 0.3831 0.7662 1.5324 3.0648 6.1296 12.2592 24.5184 49.0368 98.0736 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0036 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.88 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1566.17 quit ! Quitting program ! Log file /scr/pima/rv124_uvs/J2038+5119_S_dfm.log closed on Mon Dec 24 01:44:09 2018