! Started logfile: /scr/pima/rv124_uvs/J1939-1525_X_dfm.log on Mon Dec 24 00:20:58 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv124_uvs/J1939-1525_X_uva.fits ! Reading UV FITS file: /scr/pima/rv124_uvs/J1939-1525_X_uva.fits ! AN table 1: 100 integrations on 6 of 6 possible baselines. ! AN table 2: 30 integrations on 28 of 28 possible baselines. ! AN table 3: 3 integrations on 28 of 28 possible baselines. ! AN table 4: 4 integrations on 21 of 21 possible baselines. ! AN table 5: 42 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.412851 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1939-1525 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 4112 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1939-1525_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 274 telescope corrections were flagged in sub-array 1. ! A total of 144 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 236 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 274 telescope corrections were flagged in sub-array 1. ! A total of 144 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 236 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 274 telescope corrections were flagged in sub-array 1. ! A total of 144 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 236 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 274 telescope corrections were flagged in sub-array 1. ! A total of 144 telescope corrections were flagged in sub-array 2. ! A total of 8 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 236 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.438644Jy sigma=65.674405 ! Fit after self-cal, rms=0.521994Jy sigma=53.489291 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.9% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! The y-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.4127 mas, bmaj=0.5209 mas, bpa=42.3 degrees ! Estimated noise=0.815338 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.610915 Jy ! Component: 100 - total flux cleaned = 0.916424 Jy ! Total flux subtracted in 100 components = 0.916424 Jy ! Clean residual min=-0.050421 max=0.147660 Jy/beam ! Clean residual mean=-0.000096 rms=0.009493 Jy/beam ! Combined flux in latest and established models = 0.916424 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.916424 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.365750Jy sigma=5.748808 ! Fit after self-cal, rms=0.360955Jy sigma=5.467418 ! Inverting map ! Your choice of large map pixels excluded 3.9% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! The y-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (0, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.159751 Jy ! Component: 100 - total flux cleaned = 0.2459 Jy ! Total flux subtracted in 100 components = 0.2459 Jy ! Clean residual min=-0.030541 max=0.059844 Jy/beam ! Clean residual mean=-0.000165 rms=0.006565 Jy/beam ! Combined flux in latest and established models = 1.16232 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 1.16232 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237913Jy sigma=4.009463 ! Fit after self-cal, rms=0.237534Jy sigma=3.951355 ! Inverting map ! Your choice of large map pixels excluded 3.9% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! The y-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (0.2, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0612938 Jy ! Component: 100 - total flux cleaned = 0.0969604 Jy ! Total flux subtracted in 100 components = 0.0969604 Jy ! Clean residual min=-0.029864 max=0.034625 Jy/beam ! Clean residual mean=-0.000195 rms=0.005693 Jy/beam ! Combined flux in latest and established models = 1.25928 Jy ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 19 components and 1.25928 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.225304Jy sigma=3.751216 ! Fit after self-cal, rms=0.225377Jy sigma=3.641886 ! Inverting map ! Your choice of large map pixels excluded 3.9% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! The y-axis pixel size should ideally be below 0.199 milli-arcsec ! Added new window around map position (2.8, 4.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0365352 Jy ! Component: 100 - total flux cleaned = 0.0602119 Jy ! Total flux subtracted in 100 components = 0.0602119 Jy ! Clean residual min=-0.031624 max=0.033297 Jy/beam ! Clean residual mean=-0.000215 rms=0.005482 Jy/beam ! Combined flux in latest and established models = 1.3195 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 27 components and 1.3195 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226719Jy sigma=3.523806 ! Fit after self-cal, rms=0.226124Jy sigma=3.475483 ! Inverting map ! Your choice of large map pixels excluded 3.9% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! The y-axis pixel size should ideally be below 0.199 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.9% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! The y-axis pixel size should ideally be below 0.199 milli-arcsec ! Estimated beam: bmin=0.3103 mas, bmaj=0.7978 mas, bpa=47.4 degrees ! Estimated noise=0.504601 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00912772 Jy ! Component: 100 - total flux cleaned = -0.0123795 Jy ! Component: 150 - total flux cleaned = -0.01427 Jy ! Component: 200 - total flux cleaned = -0.0148473 Jy ! Total flux subtracted in 200 components = -0.0148473 Jy ! Clean residual min=-0.026850 max=0.011611 Jy/beam ! Clean residual mean=-0.011297 rms=0.003584 Jy/beam ! Combined flux in latest and established models = 1.30465 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 36 components and 1.30465 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224218Jy sigma=3.365365 ! Fit after self-cal, rms=0.223952Jy sigma=3.354292 ! Inverting map ! Your choice of large map pixels excluded 3.9% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! The y-axis pixel size should ideally be below 0.199 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.3103 x 0.7978 at 47.4 degrees (North through East) ! Clean map min=-0.02402 max=0.49544 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* WN 0.00* WZ 0.00* YG 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.91 HN 1.06 KP 1.06 LA 1.02 ! NL 1.04 OV 0.96 PT 0.89 SC 1.12 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.89 HN 1.05 KP 1.09 ! LA 1.03 NL 1.05 OV 0.99 SC 0.78 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.91 KP 1.07 MK 0.99 ! NL 1.06 OV 0.97 PT 0.90 ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 0.92 KP 1.06 MK 0.96 ! OV 0.97 PT 0.94 YG 3.23 ! ! ! Correcting IF 2. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* WN 0.00* WZ 0.00* YG 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.91 HN 1.05 KP 1.05 LA 1.02 ! NL 1.04 OV 0.97 PT 0.89 SC 1.14 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.94 FD 0.90 HN 1.06 KP 1.08 ! LA 1.01 NL 1.04 OV 1.00 SC 0.78 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.91 KP 1.06 MK 1.01 ! NL 1.06 OV 1.00 PT 0.90 ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 0.92 KP 1.07 MK 0.97 ! OV 0.98 PT 0.93 YG 3.20 ! ! ! Correcting IF 3. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* WN 0.00* WZ 0.00* YG 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 HN 1.05 KP 1.03 LA 1.02 ! NL 1.05 OV 0.95 PT 0.89 SC 1.06 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.91 HN 1.07 KP 1.07 ! LA 1.02 NL 1.06 OV 0.97 SC 0.77 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.91 KP 1.06 MK 1.00 ! NL 1.06 OV 0.98 PT 0.94 ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.96 FD 0.94 KP 1.06 MK 0.97 ! OV 0.96 PT 0.97 YG 3.31 ! ! ! Correcting IF 4. ! A total of 126 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.00* WN 0.00* WZ 0.00* YG 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.91 HN 1.05 KP 1.05 LA 1.03 ! NL 1.05 OV 0.96 PT 0.89 SC 1.10 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.96 FD 0.88 HN 1.06 KP 1.07 ! LA 1.00 NL 1.06 OV 0.99 SC 0.81 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.01 FD 0.92 KP 1.05 MK 1.03 ! NL 1.10 OV 0.99 PT 0.92 ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.96 FD 0.93 KP 1.08 MK 0.98 ! OV 0.99 PT 0.97 YG 3.90 ! ! ! Fit before self-cal, rms=0.223952Jy sigma=3.354292 ! Fit after self-cal, rms=0.171974Jy sigma=2.324225 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.9108 mas, bmaj=1.826 mas, bpa=-24.06 degrees ! Estimated noise=1.23214 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00632617 Jy ! Component: 100 - total flux cleaned = 0.00275034 Jy ! Component: 150 - total flux cleaned = 0.00276395 Jy ! Component: 200 - total flux cleaned = 0.00359183 Jy ! Total flux subtracted in 200 components = 0.00359183 Jy ! Clean residual min=-0.027957 max=0.030697 Jy/beam ! Clean residual mean=0.000009 rms=0.004551 Jy/beam ! Combined flux in latest and established models = 1.30824 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 56 components and 1.30824 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.157904Jy sigma=2.142430 ! Fit after self-cal, rms=0.156847Jy sigma=2.126900 ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156847Jy sigma=2.126900 ! Fit after self-cal, rms=0.178880Jy sigma=1.143026 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.9147 mas, bmaj=1.899 mas, bpa=-24.75 degrees ! Estimated noise=1.24483 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000835114 Jy ! Component: 100 - total flux cleaned = 0.00205743 Jy ! Component: 150 - total flux cleaned = 0.00313148 Jy ! Component: 200 - total flux cleaned = 0.00345184 Jy ! Total flux subtracted in 200 components = 0.00345184 Jy ! Clean residual min=-0.011165 max=0.010614 Jy/beam ! Clean residual mean=-0.000001 rms=0.002073 Jy/beam ! Combined flux in latest and established models = 1.31169 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 67 components and 1.31169 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177729Jy sigma=1.087106 ! Fit after self-cal, rms=0.177986Jy sigma=1.082696 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000431693 Jy ! Component: 100 - total flux cleaned = -0.000132299 Jy ! Component: 150 - total flux cleaned = 0.00013912 Jy ! Component: 200 - total flux cleaned = -0.00010048 Jy ! Total flux subtracted in 200 components = -0.00010048 Jy ! Clean residual min=-0.010360 max=0.010261 Jy/beam ! Clean residual mean=-0.000000 rms=0.001975 Jy/beam ! Combined flux in latest and established models = 1.31159 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 72 components and 1.31159 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177533Jy sigma=1.059930 ! Fit after self-cal, rms=0.177492Jy sigma=1.058330 ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.177492Jy sigma=1.058330 ! Fit after self-cal, rms=0.190970Jy sigma=0.938183 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.9412 mas, bmaj=1.928 mas, bpa=-22.82 degrees ! Estimated noise=1.24773 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00212372 Jy ! Component: 100 - total flux cleaned = -0.00240347 Jy ! Component: 150 - total flux cleaned = -0.00240059 Jy ! Component: 200 - total flux cleaned = -0.00239737 Jy ! Total flux subtracted in 200 components = -0.00239737 Jy ! Clean residual min=-0.008853 max=0.007986 Jy/beam ! Clean residual mean=-0.000005 rms=0.001536 Jy/beam ! Combined flux in latest and established models = 1.3092 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 85 components and 1.3092 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190310Jy sigma=0.912888 ! Fit after self-cal, rms=0.190270Jy sigma=0.911389 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000829338 Jy ! Component: 100 - total flux cleaned = -0.000827421 Jy ! Component: 150 - total flux cleaned = -0.000832429 Jy ! Component: 200 - total flux cleaned = -0.00102176 Jy ! Total flux subtracted in 200 components = -0.00102176 Jy ! Clean residual min=-0.008100 max=0.007602 Jy/beam ! Clean residual mean=-0.000005 rms=0.001469 Jy/beam ! Combined flux in latest and established models = 1.30817 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 89 components and 1.30817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189912Jy sigma=0.897114 ! Fit after self-cal, rms=0.189898Jy sigma=0.896687 ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.189898Jy sigma=0.896687 ! Fit after self-cal, rms=0.194083Jy sigma=0.890050 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=2.352 mas, bmaj=4.144 mas, bpa=1.451 degrees ! Estimated noise=1.48516 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00173184 Jy ! Component: 100 - total flux cleaned = -0.00114814 Jy ! Component: 150 - total flux cleaned = -0.00125452 Jy ! Component: 200 - total flux cleaned = -0.00142155 Jy ! Total flux subtracted in 200 components = -0.00142155 Jy ! Clean residual min=-0.005828 max=0.006010 Jy/beam ! Clean residual mean=-0.000007 rms=0.001465 Jy/beam ! Combined flux in latest and established models = 1.30675 Jy selfcal ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 95 components and 1.30675 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193983Jy sigma=0.887871 ! Fit after self-cal, rms=0.193968Jy sigma=0.886244 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0011776 Jy ! Component: 100 - total flux cleaned = -0.00133396 Jy ! Component: 150 - total flux cleaned = -0.00119384 Jy ! Component: 200 - total flux cleaned = -0.00112832 Jy ! Total flux subtracted in 200 components = -0.00112832 Jy ! Clean residual min=-0.005722 max=0.006110 Jy/beam ! Clean residual mean=-0.000006 rms=0.001432 Jy/beam ! Combined flux in latest and established models = 1.30562 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 100 components and 1.30562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193934Jy sigma=0.884829 ! Fit after self-cal, rms=0.193922Jy sigma=0.884487 ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Added new window around map position (-3.6, -8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00280036 Jy ! Component: 100 - total flux cleaned = 0.0035144 Jy ! Component: 150 - total flux cleaned = 0.00420017 Jy ! Component: 200 - total flux cleaned = 0.0043218 Jy ! Total flux subtracted in 200 components = 0.0043218 Jy ! Clean residual min=-0.004649 max=0.004909 Jy/beam ! Clean residual mean=-0.000005 rms=0.001207 Jy/beam ! Combined flux in latest and established models = 1.30995 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 125 components and 1.30994 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193567Jy sigma=0.875207 ! Fit after self-cal, rms=0.193577Jy sigma=0.874658 ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.9654 mas, bmaj=1.953 mas, bpa=-21.32 degrees ! Estimated noise=1.25288 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9654 x 1.953 at -21.32 degrees (North through East) ! Clean map min=-0.010977 max=1.1084 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.193577Jy sigma=0.874658 ! Fit after self-cal, rms=0.352609Jy sigma=0.799359 ! Inverting map and beam ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.9632 mas, bmaj=1.95 mas, bpa=-21.47 degrees ! Estimated noise=1.25316 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000569945 Jy ! Component: 100 - total flux cleaned = -0.0019909 Jy ! Component: 150 - total flux cleaned = -0.00312574 Jy ! Component: 200 - total flux cleaned = -0.00365612 Jy ! Total flux subtracted in 200 components = -0.00365612 Jy ! Clean residual min=-0.006209 max=0.005720 Jy/beam ! Clean residual mean=-0.000006 rms=0.001202 Jy/beam ! Combined flux in latest and established models = 1.30629 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 145 components and 1.30629 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.352423Jy sigma=0.782674 ! Fit after self-cal, rms=0.352433Jy sigma=0.782311 ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000174519 Jy ! Component: 100 - total flux cleaned = -0.000496655 Jy ! Component: 150 - total flux cleaned = -0.000341101 Jy ! Component: 200 - total flux cleaned = -0.000495952 Jy ! Total flux subtracted in 200 components = -0.000495952 Jy ! Clean residual min=-0.005795 max=0.005297 Jy/beam ! Clean residual mean=-0.000006 rms=0.001161 Jy/beam ! Combined flux in latest and established models = 1.30579 Jy ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 157 components and 1.30579 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.352273Jy sigma=0.771770 ! Fit after self-cal, rms=0.352282Jy sigma=0.771644 ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.352282Jy sigma=0.771644 ! Fit after self-cal, rms=0.361049Jy sigma=0.770055 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.7327 mas, bmaj=1.548 mas, bpa=-23.26 degrees ! Estimated noise=1.56299 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.898007 Jy ! Component: 100 - total flux cleaned = 1.13989 Jy ! Component: 150 - total flux cleaned = 1.21208 Jy ! Component: 200 - total flux cleaned = 1.24729 Jy ! Total flux subtracted in 200 components = 1.24729 Jy ! Clean residual min=-0.013567 max=0.020382 Jy/beam ! Clean residual mean=-0.000011 rms=0.002733 Jy/beam ! Combined flux in latest and established models = 1.24729 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 20 model components to the UV plane model. ! The established model now contains 20 components and 1.24729 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.9726 mas, bmaj=1.961 mas, bpa=-20.85 degrees ! Estimated noise=1.25478 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0259622 Jy ! Component: 100 - total flux cleaned = 0.0370221 Jy ! Component: 150 - total flux cleaned = 0.043322 Jy ! Component: 200 - total flux cleaned = 0.0462124 Jy ! Total flux subtracted in 200 components = 0.0462124 Jy ! Clean residual min=-0.008135 max=0.009373 Jy/beam ! Clean residual mean=-0.000008 rms=0.001516 Jy/beam ! Combined flux in latest and established models = 1.2935 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 34 components and 1.2935 Jy ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Added new window around map position (5.4, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00391788 Jy ! Component: 100 - total flux cleaned = 0.00361903 Jy ! Component: 150 - total flux cleaned = 0.00362564 Jy ! Component: 200 - total flux cleaned = 0.00389766 Jy ! Total flux subtracted in 200 components = 0.00389766 Jy ! Clean residual min=-0.007333 max=0.007072 Jy/beam ! Clean residual mean=-0.000008 rms=0.001373 Jy/beam ! Combined flux in latest and established models = 1.2974 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 46 components and 1.2974 Jy ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=2.351 mas, bmaj=4.14 mas, bpa=1.466 degrees ! Estimated noise=1.48646 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00485347 Jy ! Component: 100 - total flux cleaned = 0.00563942 Jy ! Component: 150 - total flux cleaned = 0.00605235 Jy ! Component: 200 - total flux cleaned = 0.00628465 Jy ! Total flux subtracted in 200 components = 0.00628465 Jy ! Clean residual min=-0.004199 max=0.004159 Jy/beam ! Clean residual mean=-0.000011 rms=0.001124 Jy/beam ! Combined flux in latest and established models = 1.30369 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000100701 Jy ! Component: 100 - total flux cleaned = 0.00029842 Jy ! Component: 150 - total flux cleaned = 0.000484864 Jy ! Component: 200 - total flux cleaned = 0.000485921 Jy ! Total flux subtracted in 200 components = 0.000485921 Jy ! Clean residual min=-0.003867 max=0.004034 Jy/beam ! Clean residual mean=-0.000010 rms=0.001085 Jy/beam ! Combined flux in latest and established models = 1.30417 Jy ! Adding 41 model components to the UV plane model. ! The established model now contains 84 components and 1.30417 Jy ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! Estimated beam: bmin=0.9726 mas, bmaj=1.961 mas, bpa=-20.85 degrees ! Estimated noise=1.25478 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00208032 Jy ! Component: 100 - total flux cleaned = -0.00184208 Jy ! Component: 150 - total flux cleaned = -0.00162292 Jy ! Component: 200 - total flux cleaned = -0.00204348 Jy ! Total flux subtracted in 200 components = -0.00204348 Jy ! Clean residual min=-0.006234 max=0.005973 Jy/beam ! Clean residual mean=-0.000007 rms=0.001243 Jy/beam ! Combined flux in latest and established models = 1.30213 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 95 components and 1.30213 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.361786Jy sigma=0.870914 ! Fit after self-cal, rms=0.361749Jy sigma=0.827192 wmodel J1939-1525_X_map.mod ! Writing 95 model components to file: J1939-1525_X_map.mod wobs J1939-1525_X_uvs.fits ! Writing UV FITS file: J1939-1525_X_uvs.fits wwins J1939-1525_X_map.win ! wwins: Wrote 7 windows to J1939-1525_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000547088 Jy ! Component: 100 - total flux cleaned = -5.75784e-05 Jy ! Component: 150 - total flux cleaned = -0.000532967 Jy ! Component: 200 - total flux cleaned = -0.000898028 Jy ! Component: 250 - total flux cleaned = -0.00124908 Jy ! Component: 300 - total flux cleaned = -0.00150473 Jy ! Component: 350 - total flux cleaned = -0.00150449 Jy ! Component: 400 - total flux cleaned = -0.00158626 Jy ! Component: 450 - total flux cleaned = -0.00150737 Jy ! Component: 500 - total flux cleaned = -0.00127438 Jy ! Component: 550 - total flux cleaned = -0.00104559 Jy ! Component: 600 - total flux cleaned = -0.000821085 Jy ! Component: 650 - total flux cleaned = -0.000967783 Jy ! Component: 700 - total flux cleaned = -0.000603637 Jy ! Component: 750 - total flux cleaned = -0.000746264 Jy ! Component: 800 - total flux cleaned = -0.000604337 Jy ! Component: 850 - total flux cleaned = -0.000813534 Jy ! Component: 900 - total flux cleaned = -0.000881829 Jy ! Component: 950 - total flux cleaned = -0.000882059 Jy ! Component: 1000 - total flux cleaned = -0.00128555 Jy ! Component: 1050 - total flux cleaned = -0.00128593 Jy ! Component: 1100 - total flux cleaned = -0.00161449 Jy ! Component: 1150 - total flux cleaned = -0.00180954 Jy ! Component: 1200 - total flux cleaned = -0.00181043 Jy ! Component: 1250 - total flux cleaned = -0.00206609 Jy ! Component: 1300 - total flux cleaned = -0.00212976 Jy ! Component: 1350 - total flux cleaned = -0.00231821 Jy ! Component: 1400 - total flux cleaned = -0.00231874 Jy ! Component: 1450 - total flux cleaned = -0.00250378 Jy ! Component: 1500 - total flux cleaned = -0.00250443 Jy ! Component: 1550 - total flux cleaned = -0.00286817 Jy ! Component: 1600 - total flux cleaned = -0.00256775 Jy ! Component: 1650 - total flux cleaned = -0.00274712 Jy ! Component: 1700 - total flux cleaned = -0.00292564 Jy ! Component: 1750 - total flux cleaned = -0.00286648 Jy ! Component: 1800 - total flux cleaned = -0.00310037 Jy ! Component: 1850 - total flux cleaned = -0.00310014 Jy ! Component: 1900 - total flux cleaned = -0.00298526 Jy ! Component: 1950 - total flux cleaned = -0.00298517 Jy ! Component: 2000 - total flux cleaned = -0.00287225 Jy ! Component: 2050 - total flux cleaned = -0.00287213 Jy ! Component: 2100 - total flux cleaned = -0.00270467 Jy ! Component: 2150 - total flux cleaned = -0.0026493 Jy ! Component: 2200 - total flux cleaned = -0.00270447 Jy ! Component: 2250 - total flux cleaned = -0.0026499 Jy ! Component: 2300 - total flux cleaned = -0.00254149 Jy ! Component: 2350 - total flux cleaned = -0.0026492 Jy ! Component: 2400 - total flux cleaned = -0.00248827 Jy ! Component: 2450 - total flux cleaned = -0.00238205 Jy ! Component: 2500 - total flux cleaned = -0.00248763 Jy ! Component: 2550 - total flux cleaned = -0.00243441 Jy ! Component: 2600 - total flux cleaned = -0.00259108 Jy ! Component: 2650 - total flux cleaned = -0.00233116 Jy ! Component: 2700 - total flux cleaned = -0.00238279 Jy ! Component: 2750 - total flux cleaned = -0.00233134 Jy ! Component: 2800 - total flux cleaned = -0.00202639 Jy ! Component: 2850 - total flux cleaned = -0.00222949 Jy ! Component: 2900 - total flux cleaned = -0.00212824 Jy ! Component: 2950 - total flux cleaned = -0.00192788 Jy ! Component: 3000 - total flux cleaned = -0.00207714 Jy ! Component: 3050 - total flux cleaned = -0.00207734 Jy ! Component: 3100 - total flux cleaned = -0.00183087 Jy ! Component: 3150 - total flux cleaned = -0.0018799 Jy ! Component: 3200 - total flux cleaned = -0.00178259 Jy ! Component: 3250 - total flux cleaned = -0.00173398 Jy ! Component: 3300 - total flux cleaned = -0.00149345 Jy ! Component: 3350 - total flux cleaned = -0.00158934 Jy ! Component: 3400 - total flux cleaned = -0.00144727 Jy ! Component: 3450 - total flux cleaned = -0.00139977 Jy ! Component: 3500 - total flux cleaned = -0.00154094 Jy ! Component: 3550 - total flux cleaned = -0.00121393 Jy ! Component: 3600 - total flux cleaned = -0.00116719 Jy ! Component: 3650 - total flux cleaned = -0.00107456 Jy ! Component: 3700 - total flux cleaned = -0.00121212 Jy ! Component: 3750 - total flux cleaned = -0.000891997 Jy ! Component: 3800 - total flux cleaned = -0.000755965 Jy ! Component: 3850 - total flux cleaned = -0.000801065 Jy ! Component: 3900 - total flux cleaned = -0.00057557 Jy ! Component: 3950 - total flux cleaned = -0.000486009 Jy ! Component: 4000 - total flux cleaned = -0.000396554 Jy ! Component: 4050 - total flux cleaned = -0.000352188 Jy ! Total flux subtracted in 4096 components = -0.000175646 Jy ! Clean residual min=-0.002559 max=0.002688 Jy/beam ! Clean residual mean=-0.000006 rms=0.000725 Jy/beam ! Combined flux in latest and established models = 1.30195 Jy keep ! Adding 285 model components to the UV plane model. ! The established model now contains 379 components and 1.30195 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv124_uvs/J1939-1525_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9726 x 1.961 at -20.85 degrees (North through East) ! Clean map min=-0.0055883 max=1.1238 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv124_uvs/J1939-1525_X_map.fits wmodel /scr/pima/rv124_uvs/J1939-1525_X_map.mod ! Writing 379 model components to file: /scr/pima/rv124_uvs/J1939-1525_X_map.mod wobs /scr/pima/rv124_uvs/J1939-1525_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv124_uvs/J1939-1525_X_uvs.fits wwins /scr/pima/rv124_uvs/J1939-1525_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rv124_uvs/J1939-1525_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.12376 invert ! Inverting map ! Your choice of large map pixels excluded 3.24% of the data. ! The x-axis pixel size should ideally be below 0.1649 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000722269 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.192817 0.192817 0.385634 0.771269 1.54254 3.08507 6.17015 12.3403 24.6806 49.3612 98.7224 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.123 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1555.88 quit ! Quitting program ! Log file /scr/pima/rv124_uvs/J1939-1525_X_dfm.log closed on Mon Dec 24 00:21:03 2018