! Started logfile: /scr/pima/rv124_uvs/J1632+8232_X_dfm.log on Mon Dec 24 00:20:17 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv124_uvs/J1632+8232_X_uva.fits ! Reading UV FITS file: /scr/pima/rv124_uvs/J1632+8232_X_uva.fits ! AN table 1: 11 integrations on 55 of 55 possible baselines. ! AN table 2: 93 integrations on 55 of 55 possible baselines. ! AN table 3: 23 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.563828 visibilities/baseline/integration-bin. ! Found source: J1632+8232 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 13056 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1632+8232_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 429 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 2. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 429 telescope corrections were flagged in sub-array 2. ! A total of 3 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 3. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 445 telescope corrections were flagged in sub-array 2. ! A total of 69 telescope corrections were flagged in sub-array 3. ! ! Correcting IF 4. ! A total of 11 telescope corrections were flagged in sub-array 1. ! A total of 445 telescope corrections were flagged in sub-array 2. ! A total of 69 telescope corrections were flagged in sub-array 3. ! ! Fit before self-cal, rms=1.091061Jy sigma=18.448053 ! Fit after self-cal, rms=0.646018Jy sigma=10.842363 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7551 mas, bmaj=0.9269 mas, bpa=-81.8 degrees ! Estimated noise=0.589029 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.270858 Jy ! Component: 100 - total flux cleaned = 0.375613 Jy ! Total flux subtracted in 100 components = 0.375613 Jy ! Clean residual min=-0.009758 max=0.046566 Jy/beam ! Clean residual mean=0.000083 rms=0.002395 Jy/beam ! Combined flux in latest and established models = 0.375613 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 7 components and 0.375613 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.145733Jy sigma=2.385464 ! Fit after self-cal, rms=0.145223Jy sigma=2.377518 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0524285 Jy ! Component: 100 - total flux cleaned = 0.080204 Jy ! Total flux subtracted in 100 components = 0.080204 Jy ! Clean residual min=-0.007558 max=0.032015 Jy/beam ! Clean residual mean=0.000046 rms=0.001805 Jy/beam ! Combined flux in latest and established models = 0.455817 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 11 components and 0.455817 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115665Jy sigma=1.847197 ! Fit after self-cal, rms=0.115395Jy sigma=1.842505 ! Inverting map ! Added new window around map position (-1.4, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288218 Jy ! Component: 100 - total flux cleaned = 0.0440525 Jy ! Total flux subtracted in 100 components = 0.0440525 Jy ! Clean residual min=-0.006883 max=0.017646 Jy/beam ! Clean residual mean=0.000028 rms=0.001564 Jy/beam ! Combined flux in latest and established models = 0.499869 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 21 components and 0.499869 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.104428Jy sigma=1.640327 ! Fit after self-cal, rms=0.103806Jy sigma=1.628974 ! Inverting map ! Added new window around map position (-2.8, 1.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0175098 Jy ! Component: 100 - total flux cleaned = 0.0285144 Jy ! Total flux subtracted in 100 components = 0.0285144 Jy ! Clean residual min=-0.006576 max=0.008269 Jy/beam ! Clean residual mean=0.000017 rms=0.001441 Jy/beam ! Combined flux in latest and established models = 0.528383 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 29 components and 0.528383 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.098976Jy sigma=1.539995 ! Fit after self-cal, rms=0.098793Jy sigma=1.536347 ! Inverting map ! Added new window around map position (16, -1.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100675 Jy ! Component: 100 - total flux cleaned = 0.0175453 Jy ! Total flux subtracted in 100 components = 0.0175453 Jy ! Clean residual min=-0.006613 max=0.007594 Jy/beam ! Clean residual mean=0.000009 rms=0.001399 Jy/beam ! Combined flux in latest and established models = 0.545929 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 35 components and 0.545929 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.097019Jy sigma=1.503680 ! Fit after self-cal, rms=0.096967Jy sigma=1.502560 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8572 mas, bmaj=1.148 mas, bpa=-82.75 degrees ! Estimated noise=0.408934 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.4, 1.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126079 Jy ! Component: 100 - total flux cleaned = 0.0212704 Jy ! Component: 150 - total flux cleaned = 0.0276347 Jy ! Component: 200 - total flux cleaned = 0.0327173 Jy ! Total flux subtracted in 200 components = 0.0327173 Jy ! Clean residual min=-0.007152 max=0.007542 Jy/beam ! Clean residual mean=-0.000525 rms=0.001779 Jy/beam ! Combined flux in latest and established models = 0.578646 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 60 components and 0.578646 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094916Jy sigma=1.464397 ! Fit after self-cal, rms=0.094810Jy sigma=1.462201 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8572 x 1.148 at -82.75 degrees (North through East) ! Clean map min=-0.0066424 max=0.35797 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.98 HN 1.01 KP 1.04 ! LA 1.01 NL 1.05 OV 1.01 PT 0.87 ! SC 0.99 WN 1.34 WZ 0.95 ! ! A total of 45 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.93 HN 1.05 KP 1.18 ! LA 1.01 MK 0.98 NL 1.06 NY 0.71 ! OV 0.99 PT 0.87 SC 1.01 ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* WN 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.03 FD 0.97 HN 1.02 KP 1.03 ! LA 1.02 NL 1.04 OV 1.01 PT 0.88 ! SC 1.00 WN 1.40 WZ 0.90 ! ! A total of 45 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.92 HN 1.04 KP 1.18 ! LA 1.01 MK 0.99 NL 1.06 NY 0.84 ! OV 0.99 PT 0.87 SC 1.00 ! ! A total of 66 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* WN 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 1.01 HN 1.01 KP 1.03 ! LA 1.00 NL 1.04 OV 1.00 PT 0.87 ! SC 0.97 WN 1.23 WZ 0.93 ! ! A total of 45 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.98 FD 0.92 HN 1.04 KP 1.17 ! LA 1.01 MK 0.96 NL 1.06 NY 1.00* ! OV 0.99 PT 0.85 SC 1.00 ! ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* WN 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.01 FD 0.99 HN 1.02 KP 1.03 ! LA 1.03 NL 1.04 OV 0.99 PT 0.84 ! SC 0.98 WN 1.11 WZ 0.98 ! ! A total of 45 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 FD 0.92 HN 1.03 KP 1.18 ! LA 1.00 MK 0.98 NL 1.06 NY 1.00* ! OV 0.99 PT 0.86 SC 1.02 ! ! Telescope amplitude corrections in sub-array 3: ! NY 0.00* WN 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.094810Jy sigma=1.462201 ! Fit after self-cal, rms=0.083660Jy sigma=1.247657 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.8567 mas, bmaj=1.139 mas, bpa=-82.22 degrees ! Estimated noise=0.409135 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00343493 Jy ! Component: 100 - total flux cleaned = 0.00465846 Jy ! Component: 150 - total flux cleaned = 0.00530041 Jy ! Component: 200 - total flux cleaned = 0.00567855 Jy ! Total flux subtracted in 200 components = 0.00567855 Jy ! Clean residual min=-0.005302 max=0.005514 Jy/beam ! Clean residual mean=0.000199 rms=0.001181 Jy/beam ! Combined flux in latest and established models = 0.584325 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 70 components and 0.584325 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083461Jy sigma=1.244408 ! Fit after self-cal, rms=0.083502Jy sigma=1.243879 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083502Jy sigma=1.243879 ! Fit after self-cal, rms=0.089095Jy sigma=1.148430 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8544 mas, bmaj=1.14 mas, bpa=-82.49 degrees ! Estimated noise=0.409197 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00239633 Jy ! Component: 100 - total flux cleaned = 0.00277658 Jy ! Component: 150 - total flux cleaned = 0.00308783 Jy ! Component: 200 - total flux cleaned = 0.00313163 Jy ! Total flux subtracted in 200 components = 0.00313163 Jy ! Clean residual min=-0.003561 max=0.006495 Jy/beam ! Clean residual mean=0.000192 rms=0.000879 Jy/beam ! Combined flux in latest and established models = 0.587456 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 81 components and 0.587456 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088995Jy sigma=1.146740 ! Fit after self-cal, rms=0.088996Jy sigma=1.146516 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-6.6, 3.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00668821 Jy ! Component: 100 - total flux cleaned = 0.0104806 Jy ! Component: 150 - total flux cleaned = 0.0129552 Jy ! Component: 200 - total flux cleaned = 0.0145302 Jy ! Total flux subtracted in 200 components = 0.0145302 Jy ! Clean residual min=-0.003281 max=0.003893 Jy/beam ! Clean residual mean=0.000155 rms=0.000818 Jy/beam ! Combined flux in latest and established models = 0.601986 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 116 components and 0.601986 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.088393Jy sigma=1.135049 ! Fit after self-cal, rms=0.088362Jy sigma=1.134120 ! Inverting map ! Added new window around map position (-13.2, 45.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395128 Jy ! Component: 100 - total flux cleaned = 0.00651975 Jy ! Component: 150 - total flux cleaned = 0.00849563 Jy ! Component: 200 - total flux cleaned = 0.009687 Jy ! Total flux subtracted in 200 components = 0.009687 Jy ! Clean residual min=-0.003306 max=0.003790 Jy/beam ! Clean residual mean=0.000127 rms=0.000802 Jy/beam ! Combined flux in latest and established models = 0.611673 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 141 components and 0.611673 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087980Jy sigma=1.131155 ! Fit after self-cal, rms=0.087962Jy sigma=1.130746 ! Inverting map ! Added new window around map position (10.8, -44). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00330257 Jy ! Component: 100 - total flux cleaned = 0.00536824 Jy ! Component: 150 - total flux cleaned = 0.00647776 Jy ! Component: 200 - total flux cleaned = 0.00734905 Jy ! Total flux subtracted in 200 components = 0.00734905 Jy ! Clean residual min=-0.003323 max=0.003176 Jy/beam ! Clean residual mean=0.000107 rms=0.000796 Jy/beam ! Combined flux in latest and established models = 0.619022 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 163 components and 0.619022 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087667Jy sigma=1.129123 ! Fit after self-cal, rms=0.087658Jy sigma=1.128940 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.087658Jy sigma=1.128940 ! Fit after self-cal, rms=0.094733Jy sigma=1.033897 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.8555 mas, bmaj=1.135 mas, bpa=-82.79 degrees ! Estimated noise=0.4084 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00155931 Jy ! Component: 100 - total flux cleaned = 0.00237389 Jy ! Component: 150 - total flux cleaned = 0.00264488 Jy ! Component: 200 - total flux cleaned = 0.00276831 Jy ! Total flux subtracted in 200 components = 0.00276831 Jy ! Clean residual min=-0.001665 max=0.001917 Jy/beam ! Clean residual mean=0.000134 rms=0.000409 Jy/beam ! Combined flux in latest and established models = 0.621791 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 182 components and 0.621791 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094593Jy sigma=1.030967 ! Fit after self-cal, rms=0.094611Jy sigma=1.030785 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-13, -6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0013959 Jy ! Component: 100 - total flux cleaned = 0.00151306 Jy ! Component: 150 - total flux cleaned = 0.00156682 Jy ! Component: 200 - total flux cleaned = 0.00151631 Jy ! Total flux subtracted in 200 components = 0.00151631 Jy ! Clean residual min=-0.001611 max=0.001893 Jy/beam ! Clean residual mean=0.000130 rms=0.000401 Jy/beam ! Combined flux in latest and established models = 0.623307 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 194 components and 0.623307 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094533Jy sigma=1.029312 ! Fit after self-cal, rms=0.094534Jy sigma=1.029260 ! Inverting map ! Added new window around map position (-10.8, 5.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00189975 Jy ! Component: 100 - total flux cleaned = 0.00242499 Jy ! Component: 150 - total flux cleaned = 0.0025203 Jy ! Component: 200 - total flux cleaned = 0.00265385 Jy ! Total flux subtracted in 200 components = 0.00265385 Jy ! Clean residual min=-0.001614 max=0.001786 Jy/beam ! Clean residual mean=0.000124 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.625961 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 209 components and 0.625961 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094463Jy sigma=1.027876 ! Fit after self-cal, rms=0.094458Jy sigma=1.027818 ! Inverting map ! Added new window around map position (37.4, 6.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00138044 Jy ! Component: 100 - total flux cleaned = 0.00146925 Jy ! Component: 150 - total flux cleaned = 0.00151183 Jy ! Component: 200 - total flux cleaned = 0.00159299 Jy ! Total flux subtracted in 200 components = 0.00159299 Jy ! Clean residual min=-0.001586 max=0.001724 Jy/beam ! Clean residual mean=0.000120 rms=0.000387 Jy/beam ! Combined flux in latest and established models = 0.627554 Jy ! Performing phase self-cal ! Adding 43 model components to the UV plane model. ! The established model now contains 219 components and 0.627554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094406Jy sigma=1.026820 ! Fit after self-cal, rms=0.094408Jy sigma=1.026783 ! Inverting map ! Added new window around map position (-15.2, 7.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139455 Jy ! Component: 100 - total flux cleaned = 0.00159849 Jy ! Component: 150 - total flux cleaned = 0.00167531 Jy ! Component: 200 - total flux cleaned = 0.00171267 Jy ! Total flux subtracted in 200 components = 0.00171267 Jy ! Clean residual min=-0.001535 max=0.001696 Jy/beam ! Clean residual mean=0.000116 rms=0.000382 Jy/beam ! Combined flux in latest and established models = 0.629267 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 232 components and 0.629267 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094361Jy sigma=1.025920 ! Fit after self-cal, rms=0.094358Jy sigma=1.025858 ! Inverting map ! Added new window around map position (-19, 9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00139647 Jy ! Component: 100 - total flux cleaned = 0.00155509 Jy ! Component: 150 - total flux cleaned = 0.00155419 Jy ! Component: 200 - total flux cleaned = 0.00166073 Jy ! Total flux subtracted in 200 components = 0.00166073 Jy ! Clean residual min=-0.001504 max=0.001627 Jy/beam ! Clean residual mean=0.000112 rms=0.000378 Jy/beam ! Combined flux in latest and established models = 0.630927 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 245 components and 0.630927 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094316Jy sigma=1.025019 ! Fit after self-cal, rms=0.094313Jy sigma=1.024983 ! Inverting map ! Added new window around map position (42, 10.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00137825 Jy ! Component: 100 - total flux cleaned = 0.00182814 Jy ! Component: 150 - total flux cleaned = 0.00196564 Jy ! Component: 200 - total flux cleaned = 0.00193218 Jy ! Total flux subtracted in 200 components = 0.00193218 Jy ! Clean residual min=-0.001416 max=0.001564 Jy/beam ! Clean residual mean=0.000107 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.63286 Jy ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 263 components and 0.63286 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094272Jy sigma=1.024240 ! Fit after self-cal, rms=0.094273Jy sigma=1.024210 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094273Jy sigma=1.024210 ! Fit after self-cal, rms=0.095098Jy sigma=1.023373 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=2.648 mas, bpa=-21.79 degrees ! Estimated noise=0.542252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000109413 Jy ! Component: 100 - total flux cleaned = 0.000376696 Jy ! Component: 150 - total flux cleaned = 0.00060073 Jy ! Component: 200 - total flux cleaned = 0.000834513 Jy ! Total flux subtracted in 200 components = 0.000834513 Jy ! Clean residual min=-0.001562 max=0.002027 Jy/beam ! Clean residual mean=0.000260 rms=0.000471 Jy/beam ! Combined flux in latest and established models = 0.633694 Jy selfcal ! Performing phase self-cal ! Adding 41 model components to the UV plane model. ! The established model now contains 296 components and 0.633694 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095079Jy sigma=1.022983 ! Fit after self-cal, rms=0.095081Jy sigma=1.022935 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (44.6, -4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0021164 Jy ! Component: 100 - total flux cleaned = 0.0033932 Jy ! Component: 150 - total flux cleaned = 0.00399757 Jy ! Component: 200 - total flux cleaned = 0.00435155 Jy ! Total flux subtracted in 200 components = 0.00435155 Jy ! Clean residual min=-0.001690 max=0.001979 Jy/beam ! Clean residual mean=0.000230 rms=0.000453 Jy/beam ! Combined flux in latest and established models = 0.638046 Jy ! Performing phase self-cal ! Adding 39 model components to the UV plane model. ! The established model now contains 323 components and 0.638046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095040Jy sigma=1.022279 ! Fit after self-cal, rms=0.095033Jy sigma=1.022195 ! Inverting map ! Added new window around map position (5.6, 50.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00169939 Jy ! Component: 100 - total flux cleaned = 0.0026004 Jy ! Component: 150 - total flux cleaned = 0.00304962 Jy ! Component: 200 - total flux cleaned = 0.00336521 Jy ! Total flux subtracted in 200 components = 0.00336521 Jy ! Clean residual min=-0.001633 max=0.001984 Jy/beam ! Clean residual mean=0.000210 rms=0.000440 Jy/beam ! Combined flux in latest and established models = 0.641411 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 358 components and 0.641411 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.095005Jy sigma=1.021765 ! Fit after self-cal, rms=0.095004Jy sigma=1.021727 ! Inverting map ! Added new window around map position (-4, 29.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00190271 Jy ! Component: 100 - total flux cleaned = 0.00293488 Jy ! Component: 150 - total flux cleaned = 0.00335992 Jy ! Component: 200 - total flux cleaned = 0.00381398 Jy ! Total flux subtracted in 200 components = 0.00381398 Jy ! Clean residual min=-0.001703 max=0.001645 Jy/beam ! Clean residual mean=0.000188 rms=0.000431 Jy/beam ! Combined flux in latest and established models = 0.645225 Jy ! Performing phase self-cal ! Adding 40 model components to the UV plane model. ! The established model now contains 382 components and 0.645225 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094962Jy sigma=1.021081 ! Fit after self-cal, rms=0.094965Jy sigma=1.021035 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=0.8551 mas, bmaj=1.132 mas, bpa=-82.96 degrees ! Estimated noise=0.407875 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8551 x 1.132 at -82.96 degrees (North through East) ! Clean map min=-0.0012769 max=0.35345 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7492 mas, bmaj=0.9101 mas, bpa=-82.77 degrees ! Estimated noise=0.587548 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.269735 Jy ! Component: 100 - total flux cleaned = 0.377343 Jy ! Component: 150 - total flux cleaned = 0.43421 Jy ! Component: 200 - total flux cleaned = 0.468918 Jy ! Total flux subtracted in 200 components = 0.468918 Jy ! Clean residual min=-0.004486 max=0.019025 Jy/beam ! Clean residual mean=0.000073 rms=0.001178 Jy/beam ! Combined flux in latest and established models = 0.468918 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.468918 Jy ! Inverting map and beam ! Estimated beam: bmin=0.8551 mas, bmaj=1.132 mas, bpa=-82.96 degrees ! Estimated noise=0.407875 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.036772 Jy ! Component: 100 - total flux cleaned = 0.0600208 Jy ! Component: 150 - total flux cleaned = 0.0755728 Jy ! Component: 200 - total flux cleaned = 0.0867998 Jy ! Total flux subtracted in 200 components = 0.0867998 Jy ! Clean residual min=-0.002795 max=0.006522 Jy/beam ! Clean residual mean=0.000307 rms=0.000722 Jy/beam ! Combined flux in latest and established models = 0.555718 Jy ! Adding 44 model components to the UV plane model. ! The established model now contains 46 components and 0.555718 Jy ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0086937 Jy ! Component: 100 - total flux cleaned = 0.0156384 Jy ! Component: 150 - total flux cleaned = 0.0212805 Jy ! Component: 200 - total flux cleaned = 0.0259207 Jy ! Total flux subtracted in 200 components = 0.0259207 Jy ! Clean residual min=-0.001915 max=0.003314 Jy/beam ! Clean residual mean=0.000239 rms=0.000491 Jy/beam ! Combined flux in latest and established models = 0.581638 Jy ! Adding 53 model components to the UV plane model. ! The established model now contains 81 components and 0.581638 Jy ! Inverting map ! Added new window around map position (-4, 2.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00397929 Jy ! Component: 100 - total flux cleaned = 0.00740484 Jy ! Component: 150 - total flux cleaned = 0.0104894 Jy ! Component: 200 - total flux cleaned = 0.0133048 Jy ! Total flux subtracted in 200 components = 0.0133048 Jy ! Clean residual min=-0.001692 max=0.002493 Jy/beam ! Clean residual mean=0.000204 rms=0.000425 Jy/beam ! Combined flux in latest and established models = 0.594943 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 122 components and 0.594943 Jy ! Inverting map ! Added new window around map position (1.2, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00275281 Jy ! Component: 100 - total flux cleaned = 0.00519848 Jy ! Component: 150 - total flux cleaned = 0.00749078 Jy ! Component: 200 - total flux cleaned = 0.00965177 Jy ! Total flux subtracted in 200 components = 0.00965177 Jy ! Clean residual min=-0.001564 max=0.001829 Jy/beam ! Clean residual mean=0.000178 rms=0.000393 Jy/beam ! Combined flux in latest and established models = 0.604595 Jy ! Adding 66 model components to the UV plane model. ! The established model now contains 151 components and 0.604594 Jy ! Inverting map ! Added new window around map position (3.8, -8.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00212287 Jy ! Component: 100 - total flux cleaned = 0.00407967 Jy ! Component: 150 - total flux cleaned = 0.00593968 Jy ! Component: 200 - total flux cleaned = 0.00771009 Jy ! Total flux subtracted in 200 components = 0.00771009 Jy ! Clean residual min=-0.001503 max=0.001687 Jy/beam ! Clean residual mean=0.000159 rms=0.000374 Jy/beam ! Combined flux in latest and established models = 0.612305 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 176 components and 0.612305 Jy ! Inverting map ! Added new window around map position (-35.6, 45). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0018106 Jy ! Component: 100 - total flux cleaned = 0.00344044 Jy ! Component: 150 - total flux cleaned = 0.0050013 Jy ! Component: 200 - total flux cleaned = 0.00632132 Jy ! Total flux subtracted in 200 components = 0.00632132 Jy ! Clean residual min=-0.001497 max=0.001579 Jy/beam ! Clean residual mean=0.000143 rms=0.000363 Jy/beam ! Combined flux in latest and established models = 0.618626 Jy ! Adding 89 model components to the UV plane model. ! The established model now contains 195 components and 0.618626 Jy ! Inverting map ! Added new window around map position (36.6, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00154325 Jy ! Component: 100 - total flux cleaned = 0.00278059 Jy ! Component: 150 - total flux cleaned = 0.00392255 Jy ! Component: 200 - total flux cleaned = 0.00507882 Jy ! Total flux subtracted in 200 components = 0.00507882 Jy ! Clean residual min=-0.001482 max=0.001543 Jy/beam ! Clean residual mean=0.000130 rms=0.000355 Jy/beam ! Combined flux in latest and established models = 0.623704 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 221 components and 0.623704 Jy ! Inverting map ! Added new window around map position (-16, 2.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00143621 Jy ! Component: 100 - total flux cleaned = 0.00258893 Jy ! Component: 150 - total flux cleaned = 0.00365518 Jy ! Component: 200 - total flux cleaned = 0.00464394 Jy ! Total flux subtracted in 200 components = 0.00464394 Jy ! Clean residual min=-0.001468 max=0.001474 Jy/beam ! Clean residual mean=0.000118 rms=0.000348 Jy/beam ! Combined flux in latest and established models = 0.628348 Jy ! Adding 103 model components to the UV plane model. ! The established model now contains 244 components and 0.628348 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.402 mas, bmaj=2.648 mas, bpa=-21.79 degrees ! Estimated noise=0.542252 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00203268 Jy ! Component: 100 - total flux cleaned = 0.00369019 Jy ! Component: 150 - total flux cleaned = 0.00517487 Jy ! Component: 200 - total flux cleaned = 0.00654211 Jy ! Total flux subtracted in 200 components = 0.00654211 Jy ! Clean residual min=-0.001495 max=0.001832 Jy/beam ! Clean residual mean=0.000256 rms=0.000436 Jy/beam ! Combined flux in latest and established models = 0.63489 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00127171 Jy ! Component: 100 - total flux cleaned = 0.00245941 Jy ! Component: 150 - total flux cleaned = 0.00357722 Jy ! Component: 200 - total flux cleaned = 0.0046326 Jy ! Total flux subtracted in 200 components = 0.0046326 Jy ! Clean residual min=-0.001445 max=0.001731 Jy/beam ! Clean residual mean=0.000225 rms=0.000427 Jy/beam ! Combined flux in latest and established models = 0.639523 Jy ! Adding 82 model components to the UV plane model. ! The established model now contains 312 components and 0.639523 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=0.8551 mas, bmaj=1.132 mas, bpa=-82.96 degrees ! Estimated noise=0.407875 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000858136 Jy ! Component: 100 - total flux cleaned = -0.000772672 Jy ! Component: 150 - total flux cleaned = -0.000649618 Jy ! Component: 200 - total flux cleaned = -0.000411778 Jy ! Total flux subtracted in 200 components = -0.000411778 Jy ! Clean residual min=-0.001413 max=0.001466 Jy/beam ! Clean residual mean=0.000091 rms=0.000335 Jy/beam ! Combined flux in latest and established models = 0.639111 Jy selfcal ! Performing phase self-cal ! Adding 57 model components to the UV plane model. ! The established model now contains 340 components and 0.639111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.094725Jy sigma=1.016164 ! Fit after self-cal, rms=0.094697Jy sigma=1.015393 wmodel J1632+8232_X_map.mod ! Writing 340 model components to file: J1632+8232_X_map.mod wobs J1632+8232_X_uvs.fits ! Writing UV FITS file: J1632+8232_X_uvs.fits wwins J1632+8232_X_map.win ! wwins: Wrote 23 windows to J1632+8232_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000455805 Jy ! Component: 100 - total flux cleaned = 0.000988572 Jy ! Component: 150 - total flux cleaned = 0.00143211 Jy ! Component: 200 - total flux cleaned = 0.00179386 Jy ! Component: 250 - total flux cleaned = 0.00217291 Jy ! Component: 300 - total flux cleaned = 0.00247661 Jy ! Component: 350 - total flux cleaned = 0.00282246 Jy ! Component: 400 - total flux cleaned = 0.00311848 Jy ! Component: 450 - total flux cleaned = 0.00334377 Jy ! Component: 500 - total flux cleaned = 0.00358928 Jy ! Component: 550 - total flux cleaned = 0.00381043 Jy ! Component: 600 - total flux cleaned = 0.00400769 Jy ! Component: 650 - total flux cleaned = 0.00422537 Jy ! Component: 700 - total flux cleaned = 0.00446295 Jy ! Component: 750 - total flux cleaned = 0.00474139 Jy ! Component: 800 - total flux cleaned = 0.00493264 Jy ! Component: 850 - total flux cleaned = 0.00514395 Jy ! Component: 900 - total flux cleaned = 0.00541678 Jy ! Component: 950 - total flux cleaned = 0.00564623 Jy ! Component: 1000 - total flux cleaned = 0.00587417 Jy ! Component: 1050 - total flux cleaned = 0.00610088 Jy ! Component: 1100 - total flux cleaned = 0.00634666 Jy ! Component: 1150 - total flux cleaned = 0.00657076 Jy ! Component: 1200 - total flux cleaned = 0.00677333 Jy ! Component: 1250 - total flux cleaned = 0.006995 Jy ! Component: 1300 - total flux cleaned = 0.00713536 Jy ! Component: 1350 - total flux cleaned = 0.00735469 Jy ! Component: 1400 - total flux cleaned = 0.00751356 Jy ! Component: 1450 - total flux cleaned = 0.00773078 Jy ! Component: 1500 - total flux cleaned = 0.00792725 Jy ! Component: 1550 - total flux cleaned = 0.00808389 Jy ! Component: 1600 - total flux cleaned = 0.00825918 Jy ! Component: 1650 - total flux cleaned = 0.00845315 Jy ! Component: 1700 - total flux cleaned = 0.00856898 Jy ! Component: 1750 - total flux cleaned = 0.00872286 Jy ! Component: 1800 - total flux cleaned = 0.00889542 Jy ! Component: 1850 - total flux cleaned = 0.00904816 Jy ! Component: 1900 - total flux cleaned = 0.0092001 Jy ! Component: 1950 - total flux cleaned = 0.00937058 Jy ! Component: 2000 - total flux cleaned = 0.00954033 Jy ! Component: 2050 - total flux cleaned = 0.00972823 Jy ! Component: 2100 - total flux cleaned = 0.00989672 Jy ! Component: 2150 - total flux cleaned = 0.0100273 Jy ! Component: 2200 - total flux cleaned = 0.010176 Jy ! Component: 2250 - total flux cleaned = 0.0103427 Jy ! Component: 2300 - total flux cleaned = 0.0105088 Jy ! Component: 2350 - total flux cleaned = 0.0106558 Jy ! Component: 2400 - total flux cleaned = 0.0108207 Jy ! Component: 2450 - total flux cleaned = 0.0108937 Jy ! Component: 2500 - total flux cleaned = 0.0110758 Jy ! Component: 2550 - total flux cleaned = 0.0112027 Jy ! Component: 2600 - total flux cleaned = 0.0114558 Jy ! Component: 2650 - total flux cleaned = 0.0115458 Jy ! Component: 2700 - total flux cleaned = 0.0116536 Jy ! Component: 2750 - total flux cleaned = 0.0118146 Jy ! Component: 2800 - total flux cleaned = 0.0119573 Jy ! Component: 2850 - total flux cleaned = 0.0120818 Jy ! Component: 2900 - total flux cleaned = 0.0122414 Jy ! Component: 2950 - total flux cleaned = 0.0123827 Jy ! Component: 3000 - total flux cleaned = 0.0124884 Jy ! Component: 3050 - total flux cleaned = 0.012664 Jy ! Component: 3100 - total flux cleaned = 0.0127865 Jy ! Component: 3150 - total flux cleaned = 0.0129087 Jy ! Component: 3200 - total flux cleaned = 0.0131174 Jy ! Component: 3250 - total flux cleaned = 0.0131867 Jy ! Component: 3300 - total flux cleaned = 0.0133596 Jy ! Component: 3350 - total flux cleaned = 0.0134802 Jy ! Component: 3400 - total flux cleaned = 0.0136005 Jy ! Component: 3450 - total flux cleaned = 0.0137548 Jy ! Component: 3500 - total flux cleaned = 0.0138744 Jy ! Component: 3550 - total flux cleaned = 0.0139767 Jy ! Component: 3600 - total flux cleaned = 0.0141127 Jy ! Component: 3650 - total flux cleaned = 0.0142484 Jy ! Component: 3700 - total flux cleaned = 0.0143836 Jy ! Component: 3750 - total flux cleaned = 0.0144848 Jy ! Component: 3800 - total flux cleaned = 0.0146192 Jy ! Component: 3850 - total flux cleaned = 0.014703 Jy ! Component: 3900 - total flux cleaned = 0.0148535 Jy ! Component: 3950 - total flux cleaned = 0.0150035 Jy ! Component: 4000 - total flux cleaned = 0.0150699 Jy ! Component: 4050 - total flux cleaned = 0.0151861 Jy ! Total flux subtracted in 4096 components = 0.0153185 Jy ! Clean residual min=-0.001008 max=0.000926 Jy/beam ! Clean residual mean=0.000051 rms=0.000282 Jy/beam ! Combined flux in latest and established models = 0.654429 Jy keep ! Adding 381 model components to the UV plane model. ! The established model now contains 720 components and 0.654429 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv124_uvs/J1632+8232_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.8551 x 1.132 at -82.96 degrees (North through East) ! Clean map min=-0.0012686 max=0.35282 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv124_uvs/J1632+8232_X_map.fits wmodel /scr/pima/rv124_uvs/J1632+8232_X_map.mod ! Writing 720 model components to file: /scr/pima/rv124_uvs/J1632+8232_X_map.mod wobs /scr/pima/rv124_uvs/J1632+8232_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv124_uvs/J1632+8232_X_uvs.fits wwins /scr/pima/rv124_uvs/J1632+8232_X_map.win ! wwins: Wrote 24 windows to /scr/pima/rv124_uvs/J1632+8232_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.35282 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000282189 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.239943 0.239943 0.479886 0.959773 1.91955 3.83909 7.67818 15.3564 30.7127 61.4255 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0008 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.352 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1250.3 quit ! Quitting program ! Log file /scr/pima/rv124_uvs/J1632+8232_X_dfm.log closed on Mon Dec 24 00:20:23 2018