! Started logfile: /scr/pima/rv124_uvs/J1344+6606_S_dfm.log on Mon Dec 24 01:42:09 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv124_uvs/J1344+6606_S_uva.fits
! Reading UV FITS file: /scr/pima/rv124_uvs/J1344+6606_S_uva.fits
! AN table 1: 2 integrations on 1 of 1 possible baselines.
! AN table 2: 7 integrations on 1 of 1 possible baselines.
! AN table 3: 99 integrations on 21 of 21 possible baselines.
! AN table 4: 5 integrations on 1 of 1 possible baselines.
! AN table 5: 5 integrations on 15 of 15 possible baselines.
! AN table 6: 14 integrations on 1 of 1 possible baselines.
! Apparent sampling: 0.431256 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1344+6606
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 3764 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1344+6606_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
!  A total of 371 telescope corrections were flagged in sub-array 3.
!  A total of 10 telescope corrections were flagged in sub-array 4.
!  A total of 8 telescope corrections were flagged in sub-array 5.
!  A total of 28 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 2.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
!  A total of 371 telescope corrections were flagged in sub-array 3.
!  A total of 10 telescope corrections were flagged in sub-array 4.
!  A total of 8 telescope corrections were flagged in sub-array 5.
!  A total of 28 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 3.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
!  A total of 693 telescope corrections were flagged in sub-array 3.
!  A total of 10 telescope corrections were flagged in sub-array 4.
!  A total of 30 telescope corrections were flagged in sub-array 5.
!  A total of 28 telescope corrections were flagged in sub-array 6.
! 
! Correcting IF 4.
!  A total of 4 telescope corrections were flagged in sub-array 1.
!  A total of 14 telescope corrections were flagged in sub-array 2.
!  A total of 371 telescope corrections were flagged in sub-array 3.
!  A total of 10 telescope corrections were flagged in sub-array 4.
!  A total of 8 telescope corrections were flagged in sub-array 5.
!  A total of 28 telescope corrections were flagged in sub-array 6.
! 
! Fit before self-cal, rms=1.018129Jy  sigma=15.852497
! Fit after  self-cal, rms=0.893126Jy  sigma=13.968752
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=7.385 mas, bmaj=10.95 mas, bpa=-51.48 degrees
! Estimated noise=1.36343 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0822228 Jy
! Component: 100  -  total flux cleaned = 0.129449 Jy
! Total flux subtracted in 100 components = 0.129449 Jy
! Clean residual min=-0.018655 max=0.035948 Jy/beam
! Clean residual mean=-0.000002 rms=0.007255 Jy/beam
! Combined flux in latest and established models = 0.129449 Jy
! Performing phase self-cal
! Adding 53 model components to the UV plane model.
! The established model now contains 53 components and 0.129449 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.167065Jy  sigma=2.521357
! Fit after  self-cal, rms=0.165824Jy  sigma=2.500314
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.05 mas, bmaj=12.28 mas, bpa=-65.8 degrees
! Estimated noise=0.982404 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.053794 Jy
! Component: 100  -  total flux cleaned = 0.0868902 Jy
! Component: 150  -  total flux cleaned = 0.108224 Jy
! Component: 200  -  total flux cleaned = 0.122186 Jy
! Total flux subtracted in 200 components = 0.122186 Jy
! Clean residual min=-0.026341 max=0.047222 Jy/beam
! Clean residual mean=-0.000019 rms=0.009082 Jy/beam
! Combined flux in latest and established models = 0.251635 Jy
! Performing phase self-cal
! Adding 68 model components to the UV plane model.
! The established model now contains 112 components and 0.251635 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.145207Jy  sigma=2.188164
! Fit after  self-cal, rms=0.143960Jy  sigma=2.170855
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 10.05 x 12.28 at -65.8 degrees (North through East)
! Clean map  min=-0.025074  max=0.099899 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   MK        0.00*    NL        0.00*    
! 
!  A total of 54 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.83     FD        1.41     KP        1.64     LA        0.72     
!   NL        2.60     OV        1.12     PT        0.75     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.00*    MK        0.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   HN        1.10     KP        0.68     LA        0.63     NL        1.81     
!   OV        1.36     PT        0.69     
! 
!  Telescope amplitude corrections in sub-array 6:
!   WN        0.00*    WZ        0.00*    
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   MK        0.00*    NL        0.00*    
! 
!  A total of 54 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.77     FD        1.43     KP        1.50     LA        0.75     
!   NL        2.37     OV        0.82     PT        0.79     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.00*    MK        0.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   HN        1.01     KP        0.66     LA        0.63     NL        1.84     
!   OV        1.27     PT        0.68     
! 
!  Telescope amplitude corrections in sub-array 6:
!   WN        0.00*    WZ        0.00*    
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   MK        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.00*    FD        0.00*    KP        0.00*    LA        0.00*    
!   NL        0.00*    OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.00*    MK        0.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   HN        0.00*    KP        0.00*    LA        0.00*    NL        0.00*    
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 6:
!   WN        0.00*    WZ        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   HN        0.00*    SC        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   MK        0.00*    NL        0.00*    
! 
!  A total of 54 telescope corrections were flagged in sub-array 3.
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.80     FD        1.46     KP        1.55     LA        0.78     
!   NL        2.38     OV        0.99     PT        0.82     
! 
!  Telescope amplitude corrections in sub-array 4:
!   FD        0.00*    MK        0.00*    
! 
!  Telescope amplitude corrections in sub-array 5:
!   HN        0.40     KP        0.71     LA        0.63     NL        3.94     
!   OV        1.53     PT        0.71     
! 
!  Telescope amplitude corrections in sub-array 6:
!   WN        0.00*    WZ        0.00*    
! 
! 
! Fit before self-cal, rms=0.143960Jy  sigma=2.170855
! Fit after  self-cal, rms=0.178925Jy  sigma=1.909578
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=10.01 mas, bmaj=12.77 mas, bpa=-74.04 degrees
! Estimated noise=1.10014 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00197335 Jy
! Component: 100  -  total flux cleaned = -0.0019738 Jy
! Component: 150  -  total flux cleaned = -0.00197072 Jy
! Component: 200  -  total flux cleaned = -0.00212351 Jy
! Total flux subtracted in 200 components = -0.00212351 Jy
! Clean residual min=-0.025021 max=0.039813 Jy/beam
! Clean residual mean=0.000144 rms=0.008035 Jy/beam
! Combined flux in latest and established models = 0.249511 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 115 components and 0.249511 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.177692Jy  sigma=1.901420
! Fit after  self-cal, rms=0.179266Jy  sigma=1.887964
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.179266Jy  sigma=1.887964
! Fit after  self-cal, rms=0.485859Jy  sigma=1.406835
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=10.02 mas, bmaj=13.19 mas, bpa=-82.2 degrees
! Estimated noise=1.1473 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00544269 Jy
! Component: 100  -  total flux cleaned = 0.0061988 Jy
! Component: 150  -  total flux cleaned = 0.00621132 Jy
! Component: 200  -  total flux cleaned = 0.00634934 Jy
! Total flux subtracted in 200 components = 0.00634934 Jy
! Clean residual min=-0.012393 max=0.016572 Jy/beam
! Clean residual mean=0.000064 rms=0.005008 Jy/beam
! Combined flux in latest and established models = 0.25586 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 128 components and 0.25586 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.485279Jy  sigma=1.403558
! Fit after  self-cal, rms=0.493962Jy  sigma=1.386271
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.002094 Jy
! Component: 100  -  total flux cleaned = -0.00262854 Jy
! Component: 150  -  total flux cleaned = -0.00291177 Jy
! Component: 200  -  total flux cleaned = -0.00308467 Jy
! Total flux subtracted in 200 components = -0.00308467 Jy
! Clean residual min=-0.012957 max=0.016996 Jy/beam
! Clean residual mean=0.000038 rms=0.005063 Jy/beam
! Combined flux in latest and established models = 0.252776 Jy
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 141 components and 0.252776 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.493747Jy  sigma=1.388260
! Fit after  self-cal, rms=0.493904Jy  sigma=1.386537
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.493904Jy  sigma=1.386537
! Fit after  self-cal, rms=0.624450Jy  sigma=1.337617
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=9.736 mas, bmaj=13.02 mas, bpa=-83.28 degrees
! Estimated noise=1.12343 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00152627 Jy
! Component: 100  -  total flux cleaned = -0.00182729 Jy
! Component: 150  -  total flux cleaned = -0.0020989 Jy
! Component: 200  -  total flux cleaned = -0.0022611 Jy
! Total flux subtracted in 200 components = -0.0022611 Jy
! Clean residual min=-0.012561 max=0.015424 Jy/beam
! Clean residual mean=0.000029 rms=0.004867 Jy/beam
! Combined flux in latest and established models = 0.250515 Jy
selfcal
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 146 components and 0.250515 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.624310Jy  sigma=1.339209
! Fit after  self-cal, rms=0.625682Jy  sigma=1.334558
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000208787 Jy
! Component: 100  -  total flux cleaned = -0.00011494 Jy
! Component: 150  -  total flux cleaned = -0.000498207 Jy
! Component: 200  -  total flux cleaned = -0.000672471 Jy
! Total flux subtracted in 200 components = -0.000672471 Jy
! Clean residual min=-0.012522 max=0.015282 Jy/beam
! Clean residual mean=0.000028 rms=0.004897 Jy/beam
! Combined flux in latest and established models = 0.249842 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 151 components and 0.249842 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.625584Jy  sigma=1.335839
! Fit after  self-cal, rms=0.625700Jy  sigma=1.334841
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.625700Jy  sigma=1.334841
! Fit after  self-cal, rms=0.665059Jy  sigma=1.330841
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.74 mas, bmaj=15.34 mas, bpa=78.61 degrees
! Estimated noise=1.15137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.00276349 Jy
! Component: 100  -  total flux cleaned = -0.00320922 Jy
! Component: 150  -  total flux cleaned = -0.00369113 Jy
! Component: 200  -  total flux cleaned = -0.00400612 Jy
! Total flux subtracted in 200 components = -0.00400612 Jy
! Clean residual min=-0.014090 max=0.016376 Jy/beam
! Clean residual mean=0.000032 rms=0.005483 Jy/beam
! Combined flux in latest and established models = 0.245836 Jy
selfcal
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 152 components and 0.245836 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.664787Jy  sigma=1.336216
! Fit after  self-cal, rms=0.665368Jy  sigma=1.334506
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000701071 Jy
! Component: 100  -  total flux cleaned = -0.0010031 Jy
! Component: 150  -  total flux cleaned = -0.0012768 Jy
! Component: 200  -  total flux cleaned = -0.00143943 Jy
! Total flux subtracted in 200 components = -0.00143943 Jy
! Clean residual min=-0.014244 max=0.016211 Jy/beam
! Clean residual mean=0.000024 rms=0.005515 Jy/beam
! Combined flux in latest and established models = 0.244397 Jy
! Performing phase self-cal
! Adding 10 model components to the UV plane model.
! The established model now contains 154 components and 0.244397 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.665242Jy  sigma=1.338158
! Fit after  self-cal, rms=0.665228Jy  sigma=1.338003
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=9.622 mas, bmaj=13.14 mas, bpa=-82.98 degrees
! Estimated noise=1.12691 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.622 x 13.14 at -82.98 degrees (North through East)
! Clean map  min=-0.016395  max=0.10207 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=6.651 mas, bmaj=11.04 mas, bpa=-62.44 degrees
! Estimated noise=1.56528 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0892949 Jy
! Component: 100  -  total flux cleaned = 0.144409 Jy
! Component: 150  -  total flux cleaned = 0.18074 Jy
! Component: 200  -  total flux cleaned = 0.205595 Jy
! Total flux subtracted in 200 components = 0.205595 Jy
! Clean residual min=-0.014313 max=0.016035 Jy/beam
! Clean residual mean=0.000004 rms=0.004136 Jy/beam
! Combined flux in latest and established models = 0.205595 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 73 model components to the UV plane model.
! The established model now contains 73 components and 0.205595 Jy
! Inverting map and beam 
! Estimated beam: bmin=9.622 mas, bmaj=13.14 mas, bpa=-82.98 degrees
! Estimated noise=1.12691 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0245334 Jy
! Component: 100  -  total flux cleaned = 0.0328141 Jy
! Component: 150  -  total flux cleaned = 0.035693 Jy
! Component: 200  -  total flux cleaned = 0.0356962 Jy
! Total flux subtracted in 200 components = 0.0356962 Jy
! Clean residual min=-0.013621 max=0.017110 Jy/beam
! Clean residual mean=0.000024 rms=0.005080 Jy/beam
! Combined flux in latest and established models = 0.241291 Jy
! Adding 49 model components to the UV plane model.
! The established model now contains 113 components and 0.241291 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=11.74 mas, bmaj=15.34 mas, bpa=78.61 degrees
! Estimated noise=1.15137 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0022673 Jy
! Component: 100  -  total flux cleaned = 0.00229457 Jy
! Component: 150  -  total flux cleaned = 0.00250792 Jy
! Component: 200  -  total flux cleaned = 0.00250398 Jy
! Total flux subtracted in 200 components = 0.00250398 Jy
! Clean residual min=-0.014616 max=0.017248 Jy/beam
! Clean residual mean=0.000026 rms=0.005531 Jy/beam
! Combined flux in latest and established models = 0.243795 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -5.7015e-06 Jy
! Component: 100  -  total flux cleaned = -0.00013481 Jy
! Component: 150  -  total flux cleaned = -0.00012507 Jy
! Component: 200  -  total flux cleaned = -0.000115234 Jy
! Total flux subtracted in 200 components = -0.000115234 Jy
! Clean residual min=-0.014729 max=0.016849 Jy/beam
! Clean residual mean=0.000025 rms=0.005519 Jy/beam
! Combined flux in latest and established models = 0.24368 Jy
! Adding 27 model components to the UV plane model.
! The established model now contains 132 components and 0.24368 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=9.622 mas, bmaj=13.14 mas, bpa=-82.98 degrees
! Estimated noise=1.12691 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000734116 Jy
! Component: 100  -  total flux cleaned = 0.000860159 Jy
! Component: 150  -  total flux cleaned = 0.000753702 Jy
! Component: 200  -  total flux cleaned = 0.000547738 Jy
! Total flux subtracted in 200 components = 0.000547738 Jy
! Clean residual min=-0.013666 max=0.015353 Jy/beam
! Clean residual mean=0.000023 rms=0.004983 Jy/beam
! Combined flux in latest and established models = 0.244228 Jy
selfcal
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 144 components and 0.244228 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.665160Jy  sigma=1.344931
! Fit after  self-cal, rms=0.665840Jy  sigma=1.342343
wmodel J1344+6606_S_map.mod
! Writing 144 model components to file: J1344+6606_S_map.mod
wobs   J1344+6606_S_uvs.fits
! Writing UV FITS file: J1344+6606_S_uvs.fits
wwins  J1344+6606_S_map.win
! wwins: Wrote 1 windows to J1344+6606_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 0.00605836 Jy
! Component: 100  -  total flux cleaned = 0.0105451 Jy
! Component: 150  -  total flux cleaned = 0.0143276 Jy
! Component: 200  -  total flux cleaned = 0.0179644 Jy
! Component: 250  -  total flux cleaned = 0.021059 Jy
! Component: 300  -  total flux cleaned = 0.0247175 Jy
! Component: 350  -  total flux cleaned = 0.0280782 Jy
! Component: 400  -  total flux cleaned = 0.031159 Jy
! Component: 450  -  total flux cleaned = 0.0345768 Jy
! Component: 500  -  total flux cleaned = 0.0369378 Jy
! Component: 550  -  total flux cleaned = 0.0392532 Jy
! Component: 600  -  total flux cleaned = 0.0417162 Jy
! Component: 650  -  total flux cleaned = 0.0437658 Jy
! Component: 700  -  total flux cleaned = 0.0454176 Jy
! Component: 750  -  total flux cleaned = 0.0468666 Jy
! Component: 800  -  total flux cleaned = 0.0484755 Jy
! Component: 850  -  total flux cleaned = 0.0502396 Jy
! Component: 900  -  total flux cleaned = 0.0514587 Jy
! Component: 950  -  total flux cleaned = 0.0526644 Jy
! Component: 1000  -  total flux cleaned = 0.0538557 Jy
! Component: 1050  -  total flux cleaned = 0.0551982 Jy
! Component: 1100  -  total flux cleaned = 0.0563604 Jy
! Component: 1150  -  total flux cleaned = 0.0578365 Jy
! Component: 1200  -  total flux cleaned = 0.0591341 Jy
! Component: 1250  -  total flux cleaned = 0.0596173 Jy
! Component: 1300  -  total flux cleaned = 0.0608876 Jy
! Component: 1350  -  total flux cleaned = 0.0615152 Jy
! Component: 1400  -  total flux cleaned = 0.0622922 Jy
! Component: 1450  -  total flux cleaned = 0.0625988 Jy
! Component: 1500  -  total flux cleaned = 0.063514 Jy
! Component: 1550  -  total flux cleaned = 0.0635132 Jy
! Component: 1600  -  total flux cleaned = 0.0642634 Jy
! Component: 1650  -  total flux cleaned = 0.0645594 Jy
! Component: 1700  -  total flux cleaned = 0.0649995 Jy
! Component: 1750  -  total flux cleaned = 0.0651443 Jy
! Component: 1800  -  total flux cleaned = 0.0658664 Jy
! Component: 1850  -  total flux cleaned = 0.0657218 Jy
! Component: 1900  -  total flux cleaned = 0.0660073 Jy
! Component: 1950  -  total flux cleaned = 0.0664319 Jy
! Component: 2000  -  total flux cleaned = 0.0667108 Jy
! Component: 2050  -  total flux cleaned = 0.0665719 Jy
! Component: 2100  -  total flux cleaned = 0.0664359 Jy
! Component: 2150  -  total flux cleaned = 0.0669822 Jy
! Component: 2200  -  total flux cleaned = 0.0669822 Jy
! Component: 2250  -  total flux cleaned = 0.0669813 Jy
! Component: 2300  -  total flux cleaned = 0.0659141 Jy
! Component: 2350  -  total flux cleaned = 0.066444 Jy
! Component: 2400  -  total flux cleaned = 0.0659171 Jy
! Component: 2450  -  total flux cleaned = 0.0656547 Jy
! Component: 2500  -  total flux cleaned = 0.0652649 Jy
! Component: 2550  -  total flux cleaned = 0.0647482 Jy
! Component: 2600  -  total flux cleaned = 0.0648763 Jy
! Component: 2650  -  total flux cleaned = 0.064875 Jy
! Component: 2700  -  total flux cleaned = 0.0641161 Jy
! Component: 2750  -  total flux cleaned = 0.06374 Jy
! Component: 2800  -  total flux cleaned = 0.063367 Jy
! Component: 2850  -  total flux cleaned = 0.0634916 Jy
! Component: 2900  -  total flux cleaned = 0.0631227 Jy
! Component: 2950  -  total flux cleaned = 0.0630023 Jy
! Component: 3000  -  total flux cleaned = 0.063003 Jy
! Component: 3050  -  total flux cleaned = 0.0630029 Jy
! Component: 3100  -  total flux cleaned = 0.0626444 Jy
! Component: 3150  -  total flux cleaned = 0.0625267 Jy
! Component: 3200  -  total flux cleaned = 0.0625279 Jy
! Component: 3250  -  total flux cleaned = 0.062411 Jy
! Component: 3300  -  total flux cleaned = 0.0624123 Jy
! Component: 3350  -  total flux cleaned = 0.062297 Jy
! Component: 3400  -  total flux cleaned = 0.0624127 Jy
! Component: 3450  -  total flux cleaned = 0.062297 Jy
! Component: 3500  -  total flux cleaned = 0.0619548 Jy
! Component: 3550  -  total flux cleaned = 0.0619546 Jy
! Component: 3600  -  total flux cleaned = 0.0620666 Jy
! Component: 3650  -  total flux cleaned = 0.0612817 Jy
! Component: 3700  -  total flux cleaned = 0.0611711 Jy
! Component: 3750  -  total flux cleaned = 0.0615025 Jy
! Component: 3800  -  total flux cleaned = 0.0610609 Jy
! Component: 3850  -  total flux cleaned = 0.0606227 Jy
! Component: 3900  -  total flux cleaned = 0.0604049 Jy
! Component: 3950  -  total flux cleaned = 0.060297 Jy
! Component: 4000  -  total flux cleaned = 0.0601889 Jy
! Component: 4050  -  total flux cleaned = 0.0596533 Jy
! Total flux subtracted in 4096 components = 0.0598659 Jy
! Clean residual min=-0.006147 max=0.005761 Jy/beam
! Clean residual mean=0.000055 rms=0.002915 Jy/beam
! Combined flux in latest and established models = 0.304093 Jy
keep
! Adding 598 model components to the UV plane model.
! The established model now contains 742 components and 0.304094 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv124_uvs/J1344+6606_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 9.622 x 13.14 at -82.98 degrees (North through East)
! Clean map  min=-0.017548  max=0.10409 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv124_uvs/J1344+6606_S_map.fits
wmodel /scr/pima/rv124_uvs/J1344+6606_S_map.mod
! Writing 742 model components to file: /scr/pima/rv124_uvs/J1344+6606_S_map.mod
wobs   /scr/pima/rv124_uvs/J1344+6606_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv124_uvs/J1344+6606_S_uvs.fits
wwins  /scr/pima/rv124_uvs/J1344+6606_S_map.win
! wwins: Wrote 2 windows to /scr/pima/rv124_uvs/J1344+6606_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.104088 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.00294488 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -8.48764 8.48764 16.9753 33.9506 67.9011
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0088 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.104 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  35.345 
quit
! Quitting program
! Log file /scr/pima/rv124_uvs/J1344+6606_S_dfm.log closed on Mon Dec 24 01:42:13 2018