! Started logfile: /scr/pima/rv124_uvs/J1343+6602_X_dfm.log on Mon Dec 24 00:19:27 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv124_uvs/J1343+6602_X_uva.fits
! Reading UV FITS file: /scr/pima/rv124_uvs/J1343+6602_X_uva.fits
! AN table 1: 142 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.364632 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1343+6602
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 9320 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J1343+6602_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 832 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 832 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 832 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 832 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.042051Jy  sigma=18.625252
! Fit after  self-cal, rms=0.741003Jy  sigma=13.191944
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0779% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=0.9318 mas, bmaj=1.111 mas, bpa=-18.3 degrees
! Estimated noise=0.661899 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.194203 Jy
! Component: 100  -  total flux cleaned = 0.243674 Jy
! Total flux subtracted in 100 components = 0.243674 Jy
! Clean residual min=-0.005242 max=0.021184 Jy/beam
! Clean residual mean=-0.000007 rms=0.001354 Jy/beam
! Combined flux in latest and established models = 0.243674 Jy
! Performing phase self-cal
! Adding 7 model components to the UV plane model.
! The established model now contains 7 components and 0.243674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077431Jy  sigma=1.334737
! Fit after  self-cal, rms=0.077192Jy  sigma=1.331372
! Inverting map 
! Your choice of large map pixels excluded 0.0779% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0242418 Jy
! Component: 100  -  total flux cleaned = 0.037115 Jy
! Total flux subtracted in 100 components = 0.037115 Jy
! Clean residual min=-0.004053 max=0.008985 Jy/beam
! Clean residual mean=-0.000001 rms=0.001012 Jy/beam
! Combined flux in latest and established models = 0.280789 Jy
! Performing phase self-cal
! Adding 11 model components to the UV plane model.
! The established model now contains 12 components and 0.280789 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.066253Jy  sigma=1.118524
! Fit after  self-cal, rms=0.066028Jy  sigma=1.114862
! Inverting map 
! Your choice of large map pixels excluded 0.0779% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Added new window around map position (1, 1.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0103802 Jy
! Component: 100  -  total flux cleaned = 0.016577 Jy
! Total flux subtracted in 100 components = 0.016577 Jy
! Clean residual min=-0.004121 max=0.006293 Jy/beam
! Clean residual mean=0.000002 rms=0.000926 Jy/beam
! Combined flux in latest and established models = 0.297367 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 21 components and 0.297367 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.063680Jy  sigma=1.068135
! Fit after  self-cal, rms=0.063497Jy  sigma=1.064818
! Inverting map 
! Your choice of large map pixels excluded 0.0779% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0779% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=1.191 mas, bmaj=1.34 mas, bpa=-14.67 degrees
! Estimated noise=0.458578 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00793544 Jy
! Component: 100  -  total flux cleaned = 0.0122538 Jy
! Component: 150  -  total flux cleaned = 0.0149694 Jy
! Component: 200  -  total flux cleaned = 0.0163572 Jy
! Total flux subtracted in 200 components = 0.0163572 Jy
! Clean residual min=-0.004472 max=0.004317 Jy/beam
! Clean residual mean=0.000019 rms=0.000986 Jy/beam
! Combined flux in latest and established models = 0.313724 Jy
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 32 components and 0.313724 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.062537Jy  sigma=1.045162
! Fit after  self-cal, rms=0.062461Jy  sigma=1.043709
! Inverting map 
! Your choice of large map pixels excluded 0.0779% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.191 x 1.34 at -14.67 degrees (North through East)
! Clean map  min=-0.0041019  max=0.25303 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        1.06     KP        1.12     
!   LA        1.03     MK        0.99     NL        1.06     OV        1.00     
!   PT        0.89     SC        0.95     
! 
! 
! Correcting IF 2.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        1.04     KP        1.12     
!   LA        1.04     MK        1.02     NL        1.06     OV        0.99     
!   PT        0.90     SC        0.93     
! 
! 
! Correcting IF 3.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.92     HN        1.07     KP        1.12     
!   LA        1.02     MK        0.98     NL        1.06     OV        0.97     
!   PT        0.88     SC        0.93     
! 
! 
! Correcting IF 4.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.01     FD        0.91     HN        1.04     KP        1.15     
!   LA        1.02     MK        0.99     NL        1.06     OV        1.01     
!   PT        0.89     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.062461Jy  sigma=1.043709
! Fit after  self-cal, rms=0.056956Jy  sigma=0.951269
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=1.17 mas, bmaj=1.342 mas, bpa=-13.08 degrees
! Estimated noise=0.465289 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (43.8, -5.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00166002 Jy
! Component: 100  -  total flux cleaned = 0.0014583 Jy
! Component: 150  -  total flux cleaned = 0.00116769 Jy
! Component: 200  -  total flux cleaned = 0.000958646 Jy
! Total flux subtracted in 200 components = 0.000958646 Jy
! Clean residual min=-0.002527 max=0.002557 Jy/beam
! Clean residual mean=0.000007 rms=0.000558 Jy/beam
! Combined flux in latest and established models = 0.314682 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 45 components and 0.314682 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056787Jy  sigma=0.948473
! Fit after  self-cal, rms=0.056807Jy  sigma=0.947970
! Inverting map 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.056807Jy  sigma=0.947970
! Fit after  self-cal, rms=0.055787Jy  sigma=0.920919
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=1.173 mas, bmaj=1.342 mas, bpa=-11.55 degrees
! Estimated noise=0.466362 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000476229 Jy
! Component: 100  -  total flux cleaned = -0.00113803 Jy
! Component: 150  -  total flux cleaned = -0.00160642 Jy
! Component: 200  -  total flux cleaned = -0.0018399 Jy
! Total flux subtracted in 200 components = -0.0018399 Jy
! Clean residual min=-0.001808 max=0.001958 Jy/beam
! Clean residual mean=0.000003 rms=0.000433 Jy/beam
! Combined flux in latest and established models = 0.312843 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 55 components and 0.312843 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055714Jy  sigma=0.919771
! Fit after  self-cal, rms=0.055708Jy  sigma=0.919571
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (2.6, 5.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00164776 Jy
! Component: 100  -  total flux cleaned = 0.00179471 Jy
! Component: 150  -  total flux cleaned = 0.00184002 Jy
! Component: 200  -  total flux cleaned = 0.00180485 Jy
! Total flux subtracted in 200 components = 0.00180485 Jy
! Clean residual min=-0.001807 max=0.001648 Jy/beam
! Clean residual mean=0.000002 rms=0.000424 Jy/beam
! Combined flux in latest and established models = 0.314647 Jy
! Performing phase self-cal
! Adding 18 model components to the UV plane model.
! The established model now contains 67 components and 0.314647 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055623Jy  sigma=0.918065
! Fit after  self-cal, rms=0.055616Jy  sigma=0.917964
! Inverting map 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055616Jy  sigma=0.917964
! Fit after  self-cal, rms=0.055406Jy  sigma=0.913489
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=1.173 mas, bmaj=1.34 mas, bpa=-11.64 degrees
! Estimated noise=0.466199 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 3.94089e-05 Jy
! Component: 100  -  total flux cleaned = -7.17954e-05 Jy
! Component: 150  -  total flux cleaned = -0.000238665 Jy
! Component: 200  -  total flux cleaned = -0.000421831 Jy
! Total flux subtracted in 200 components = -0.000421831 Jy
! Clean residual min=-0.001789 max=0.001627 Jy/beam
! Clean residual mean=0.000002 rms=0.000407 Jy/beam
! Combined flux in latest and established models = 0.314226 Jy
selfcal
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 75 components and 0.314226 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055361Jy  sigma=0.912767
! Fit after  self-cal, rms=0.055360Jy  sigma=0.912711
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -3.60638e-05 Jy
! Component: 100  -  total flux cleaned = -0.000209328 Jy
! Component: 150  -  total flux cleaned = -0.000317375 Jy
! Component: 200  -  total flux cleaned = -0.000419141 Jy
! Total flux subtracted in 200 components = -0.000419141 Jy
! Clean residual min=-0.001750 max=0.001643 Jy/beam
! Clean residual mean=0.000002 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.313806 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 81 components and 0.313806 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055331Jy  sigma=0.912273
! Fit after  self-cal, rms=0.055329Jy  sigma=0.912239
! Inverting map 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055329Jy  sigma=0.912239
! Fit after  self-cal, rms=0.055315Jy  sigma=0.912185
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=2.498 mas, bmaj=2.628 mas, bpa=-46.33 degrees
! Estimated noise=0.566462 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000234796 Jy
! Component: 100  -  total flux cleaned = -0.000422794 Jy
! Component: 150  -  total flux cleaned = -0.000519704 Jy
! Component: 200  -  total flux cleaned = -0.000569878 Jy
! Total flux subtracted in 200 components = -0.000569878 Jy
! Clean residual min=-0.001609 max=0.001742 Jy/beam
! Clean residual mean=0.000004 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.313236 Jy
selfcal
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 91 components and 0.313236 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055308Jy  sigma=0.911991
! Fit after  self-cal, rms=0.055306Jy  sigma=0.911966
flux_cutoff = imstat(rms) * dynam
! Inverting map 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -9.67412e-05 Jy
! Component: 100  -  total flux cleaned = -0.000159095 Jy
! Component: 150  -  total flux cleaned = -0.00020105 Jy
! Component: 200  -  total flux cleaned = -0.000214215 Jy
! Total flux subtracted in 200 components = -0.000214215 Jy
! Clean residual min=-0.001595 max=0.001736 Jy/beam
! Clean residual mean=0.000004 rms=0.000463 Jy/beam
! Combined flux in latest and established models = 0.313022 Jy
! Performing phase self-cal
! Adding 20 model components to the UV plane model.
! The established model now contains 99 components and 0.313022 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055302Jy  sigma=0.911890
! Fit after  self-cal, rms=0.055301Jy  sigma=0.911875
! Inverting map 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=1.173 mas, bmaj=1.339 mas, bpa=-11.67 degrees
! Estimated noise=0.466124 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.173 x 1.339 at -11.67 degrees (North through East)
! Clean map  min=-0.0016655  max=0.25265 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=0.9145 mas, bmaj=1.122 mas, bpa=-14.88 degrees
! Estimated noise=0.673658 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.19433 Jy
! Component: 100  -  total flux cleaned = 0.248339 Jy
! Component: 150  -  total flux cleaned = 0.273512 Jy
! Component: 200  -  total flux cleaned = 0.28694 Jy
! Total flux subtracted in 200 components = 0.28694 Jy
! Clean residual min=-0.002992 max=0.006681 Jy/beam
! Clean residual mean=-0.000001 rms=0.000680 Jy/beam
! Combined flux in latest and established models = 0.28694 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 17 model components to the UV plane model.
! The established model now contains 17 components and 0.28694 Jy
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=1.173 mas, bmaj=1.339 mas, bpa=-11.67 degrees
! Estimated noise=0.466124 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0105616 Jy
! Component: 100  -  total flux cleaned = 0.0159677 Jy
! Component: 150  -  total flux cleaned = 0.0192234 Jy
! Component: 200  -  total flux cleaned = 0.0215211 Jy
! Total flux subtracted in 200 components = 0.0215211 Jy
! Clean residual min=-0.001772 max=0.001745 Jy/beam
! Clean residual mean=0.000004 rms=0.000425 Jy/beam
! Combined flux in latest and established models = 0.308461 Jy
! Adding 31 model components to the UV plane model.
! The established model now contains 39 components and 0.308461 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=2.498 mas, bmaj=2.628 mas, bpa=-46.33 degrees
! Estimated noise=0.566462 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00209012 Jy
! Component: 100  -  total flux cleaned = 0.00284926 Jy
! Component: 150  -  total flux cleaned = 0.00342883 Jy
! Component: 200  -  total flux cleaned = 0.00373566 Jy
! Total flux subtracted in 200 components = 0.00373566 Jy
! Clean residual min=-0.001570 max=0.001842 Jy/beam
! Clean residual mean=0.000005 rms=0.000469 Jy/beam
! Combined flux in latest and established models = 0.312196 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00011544 Jy
! Component: 100  -  total flux cleaned = 0.000245171 Jy
! Component: 150  -  total flux cleaned = 0.000315634 Jy
! Component: 200  -  total flux cleaned = 0.000422545 Jy
! Total flux subtracted in 200 components = 0.000422545 Jy
! Clean residual min=-0.001589 max=0.001798 Jy/beam
! Clean residual mean=0.000004 rms=0.000465 Jy/beam
! Combined flux in latest and established models = 0.312619 Jy
! Adding 33 model components to the UV plane model.
! The established model now contains 61 components and 0.312619 Jy
! Inverting map 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! Estimated beam: bmin=1.173 mas, bmaj=1.339 mas, bpa=-11.67 degrees
! Estimated noise=0.466124 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000107703 Jy
! Component: 100  -  total flux cleaned = -6.34587e-05 Jy
! Component: 150  -  total flux cleaned = -9.99108e-05 Jy
! Component: 200  -  total flux cleaned = -0.000134261 Jy
! Total flux subtracted in 200 components = -0.000134261 Jy
! Clean residual min=-0.001796 max=0.001651 Jy/beam
! Clean residual mean=0.000002 rms=0.000405 Jy/beam
! Combined flux in latest and established models = 0.312485 Jy
selfcal
! Performing phase self-cal
! Adding 21 model components to the UV plane model.
! The established model now contains 77 components and 0.312485 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055387Jy  sigma=0.912984
! Fit after  self-cal, rms=0.055348Jy  sigma=0.912436
wmodel J1343+6602_X_map.mod
! Writing 77 model components to file: J1343+6602_X_map.mod
wobs   J1343+6602_X_uvs.fits
! Writing UV FITS file: J1343+6602_X_uvs.fits
wwins  J1343+6602_X_map.win
! wwins: Wrote 4 windows to J1343+6602_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000300673 Jy
! Component: 100  -  total flux cleaned = -0.000511243 Jy
! Component: 150  -  total flux cleaned = -0.000684751 Jy
! Component: 200  -  total flux cleaned = -0.000939164 Jy
! Component: 250  -  total flux cleaned = -0.00113316 Jy
! Component: 300  -  total flux cleaned = -0.00132396 Jy
! Component: 350  -  total flux cleaned = -0.00151203 Jy
! Component: 400  -  total flux cleaned = -0.00169805 Jy
! Component: 450  -  total flux cleaned = -0.00190791 Jy
! Component: 500  -  total flux cleaned = -0.00203735 Jy
! Component: 550  -  total flux cleaned = -0.00211439 Jy
! Component: 600  -  total flux cleaned = -0.00216524 Jy
! Component: 650  -  total flux cleaned = -0.00224088 Jy
! Component: 700  -  total flux cleaned = -0.00226564 Jy
! Component: 750  -  total flux cleaned = -0.00229055 Jy
! Component: 800  -  total flux cleaned = -0.002413 Jy
! Component: 850  -  total flux cleaned = -0.0023642 Jy
! Component: 900  -  total flux cleaned = -0.00238828 Jy
! Component: 950  -  total flux cleaned = -0.00243581 Jy
! Component: 1000  -  total flux cleaned = -0.00241212 Jy
! Component: 1050  -  total flux cleaned = -0.00248299 Jy
! Component: 1100  -  total flux cleaned = -0.00245978 Jy
! Component: 1150  -  total flux cleaned = -0.00257586 Jy
! Component: 1200  -  total flux cleaned = -0.0024835 Jy
! Component: 1250  -  total flux cleaned = -0.00255222 Jy
! Component: 1300  -  total flux cleaned = -0.00248398 Jy
! Component: 1350  -  total flux cleaned = -0.00252924 Jy
! Component: 1400  -  total flux cleaned = -0.00257417 Jy
! Component: 1450  -  total flux cleaned = -0.00248459 Jy
! Component: 1500  -  total flux cleaned = -0.00259565 Jy
! Component: 1550  -  total flux cleaned = -0.00246305 Jy
! Component: 1600  -  total flux cleaned = -0.00246325 Jy
! Component: 1650  -  total flux cleaned = -0.00248522 Jy
! Component: 1700  -  total flux cleaned = -0.00252857 Jy
! Component: 1750  -  total flux cleaned = -0.00252855 Jy
! Component: 1800  -  total flux cleaned = -0.00255006 Jy
! Component: 1850  -  total flux cleaned = -0.00246447 Jy
! Component: 1900  -  total flux cleaned = -0.00252848 Jy
! Component: 1950  -  total flux cleaned = -0.00250737 Jy
! Component: 2000  -  total flux cleaned = -0.00257061 Jy
! Component: 2050  -  total flux cleaned = -0.00252861 Jy
! Component: 2100  -  total flux cleaned = -0.0025705 Jy
! Component: 2150  -  total flux cleaned = -0.00257041 Jy
! Component: 2200  -  total flux cleaned = -0.0026739 Jy
! Component: 2250  -  total flux cleaned = -0.00265326 Jy
! Component: 2300  -  total flux cleaned = -0.00259172 Jy
! Component: 2350  -  total flux cleaned = -0.00267333 Jy
! Component: 2400  -  total flux cleaned = -0.00265308 Jy
! Component: 2450  -  total flux cleaned = -0.00267329 Jy
! Component: 2500  -  total flux cleaned = -0.00267327 Jy
! Component: 2550  -  total flux cleaned = -0.00271343 Jy
! Component: 2600  -  total flux cleaned = -0.00261358 Jy
! Component: 2650  -  total flux cleaned = -0.00261363 Jy
! Component: 2700  -  total flux cleaned = -0.00269288 Jy
! Component: 2750  -  total flux cleaned = -0.00271252 Jy
! Component: 2800  -  total flux cleaned = -0.00267326 Jy
! Component: 2850  -  total flux cleaned = -0.00263413 Jy
! Component: 2900  -  total flux cleaned = -0.00271216 Jy
! Component: 2950  -  total flux cleaned = -0.00275092 Jy
! Component: 3000  -  total flux cleaned = -0.00275098 Jy
! Component: 3050  -  total flux cleaned = -0.0027125 Jy
! Component: 3100  -  total flux cleaned = -0.00271252 Jy
! Component: 3150  -  total flux cleaned = -0.00273166 Jy
! Component: 3200  -  total flux cleaned = -0.00276958 Jy
! Component: 3250  -  total flux cleaned = -0.00280745 Jy
! Component: 3300  -  total flux cleaned = -0.00271305 Jy
! Component: 3350  -  total flux cleaned = -0.00265663 Jy
! Component: 3400  -  total flux cleaned = -0.00267547 Jy
! Component: 3450  -  total flux cleaned = -0.00265669 Jy
! Component: 3500  -  total flux cleaned = -0.00271269 Jy
! Component: 3550  -  total flux cleaned = -0.0028611 Jy
! Component: 3600  -  total flux cleaned = -0.00276872 Jy
! Component: 3650  -  total flux cleaned = -0.00276883 Jy
! Component: 3700  -  total flux cleaned = -0.00276893 Jy
! Component: 3750  -  total flux cleaned = -0.00280556 Jy
! Component: 3800  -  total flux cleaned = -0.00282374 Jy
! Component: 3850  -  total flux cleaned = -0.00286013 Jy
! Component: 3900  -  total flux cleaned = -0.00287819 Jy
! Component: 3950  -  total flux cleaned = -0.00286017 Jy
! Component: 4000  -  total flux cleaned = -0.00286028 Jy
! Component: 4050  -  total flux cleaned = -0.00275268 Jy
! Total flux subtracted in 4096 components = -0.00280644 Jy
! Clean residual min=-0.000893 max=0.001038 Jy/beam
! Clean residual mean=0.000000 rms=0.000313 Jy/beam
! Combined flux in latest and established models = 0.309678 Jy
keep
! Adding 342 model components to the UV plane model.
! The established model now contains 419 components and 0.309678 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv124_uvs/J1343+6602_X_map.fits
! Inverting map 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 1.173 x 1.339 at -11.67 degrees (North through East)
! Clean map  min=-0.0014591  max=0.25248 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv124_uvs/J1343+6602_X_map.fits
wmodel /scr/pima/rv124_uvs/J1343+6602_X_map.mod
! Writing 419 model components to file: /scr/pima/rv124_uvs/J1343+6602_X_map.mod
wobs   /scr/pima/rv124_uvs/J1343+6602_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv124_uvs/J1343+6602_X_uvs.fits
wwins  /scr/pima/rv124_uvs/J1343+6602_X_map.win
! wwins: Wrote 5 windows to /scr/pima/rv124_uvs/J1343+6602_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.252483 
invert
! Inverting map 
! Your choice of large map pixels excluded 0.0814% of the data.
!  The x-axis pixel size should ideally be below 0.1997 milli-arcsec
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000312468 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.371274 0.371274 0.742548 1.4851 2.97019 5.94039 11.8808 23.7615 47.5231 95.0462
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0009 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.252 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  808.028 
quit
! Quitting program
! Log file /scr/pima/rv124_uvs/J1343+6602_X_dfm.log closed on Mon Dec 24 00:19:31 2018