! Started logfile: /scr/pima/rv124_uvs/J1343+6602_S_dfm.log on Mon Dec 24 01:42:03 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv124_uvs/J1343+6602_S_uva.fits
! Reading UV FITS file: /scr/pima/rv124_uvs/J1343+6602_S_uva.fits
! AN table 1: 142 integrations on 45 of 45 possible baselines.
! Apparent sampling: 0.364632 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J1343+6602
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 9320 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J1343+6602_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 832 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 2.
!  A total of 832 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 3.
!  A total of 1420 telescope corrections were flagged in sub-array 1.
! 
! Correcting IF 4.
!  A total of 832 telescope corrections were flagged in sub-array 1.
! 
! Fit before self-cal, rms=1.040964Jy  sigma=17.210724
! Fit after  self-cal, rms=0.726005Jy  sigma=12.153510
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=3.481 mas, bmaj=4.124 mas, bpa=-20.42 degrees
! Estimated noise=0.799966 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.208437 Jy
! Component: 100  -  total flux cleaned = 0.256674 Jy
! Total flux subtracted in 100 components = 0.256674 Jy
! Clean residual min=-0.008883 max=0.017760 Jy/beam
! Clean residual mean=-0.000007 rms=0.001690 Jy/beam
! Combined flux in latest and established models = 0.256674 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.256674 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.097201Jy  sigma=1.327182
! Fit after  self-cal, rms=0.097199Jy  sigma=1.327120
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0182873 Jy
! Component: 100  -  total flux cleaned = 0.0273496 Jy
! Total flux subtracted in 100 components = 0.0273496 Jy
! Clean residual min=-0.008619 max=0.007369 Jy/beam
! Clean residual mean=-0.000006 rms=0.001514 Jy/beam
! Combined flux in latest and established models = 0.284023 Jy
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 20 components and 0.284023 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.092241Jy  sigma=1.256408
! Fit after  self-cal, rms=0.092227Jy  sigma=1.256120
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.322 mas, bmaj=4.908 mas, bpa=-11.27 degrees
! Estimated noise=0.572385 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00620917 Jy
! Component: 100  -  total flux cleaned = 0.00907774 Jy
! Component: 150  -  total flux cleaned = 0.00951204 Jy
! Component: 200  -  total flux cleaned = 0.00962675 Jy
! Total flux subtracted in 200 components = 0.00962675 Jy
! Clean residual min=-0.006987 max=0.005648 Jy/beam
! Clean residual mean=-0.000009 rms=0.001397 Jy/beam
! Combined flux in latest and established models = 0.29365 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 27 components and 0.29365 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.091537Jy  sigma=1.251738
! Fit after  self-cal, rms=0.091522Jy  sigma=1.251425
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.322 x 4.908 at -11.27 degrees (North through East)
! Clean map  min=-0.0065679  max=0.273 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        1.07     HN        0.95     KP        0.94     
!   LA        0.92     MK        1.09     NL        1.13     OV        0.92     
!   PT        1.07     SC        0.99     
! 
! 
! Correcting IF 2.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        1.08     HN        0.96     KP        0.98     
!   LA        0.89     MK        1.06     NL        1.13     OV        0.81     
!   PT        1.07     SC        0.89     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   BR        0.00*    FD        0.00*    HN        0.00*    KP        0.00*    
!   LA        0.00*    MK        0.00*    NL        0.00*    OV        0.00*    
!   PT        0.00*    SC        0.00*    
! 
! 
! Correcting IF 4.
!  A total of 84 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.02     FD        1.09     HN        0.97     KP        0.97     
!   LA        0.92     MK        1.13     NL        1.14     OV        0.94     
!   PT        1.08     SC        0.96     
! 
! 
! Fit before self-cal, rms=0.091522Jy  sigma=1.251425
! Fit after  self-cal, rms=0.079240Jy  sigma=1.137339
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=4.291 mas, bmaj=4.902 mas, bpa=-11.34 degrees
! Estimated noise=0.586144 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00320932 Jy
! Component: 100  -  total flux cleaned = 0.00421362 Jy
! Component: 150  -  total flux cleaned = 0.00437572 Jy
! Component: 200  -  total flux cleaned = 0.00450315 Jy
! Total flux subtracted in 200 components = 0.00450315 Jy
! Clean residual min=-0.003791 max=0.004095 Jy/beam
! Clean residual mean=-0.000002 rms=0.000979 Jy/beam
! Combined flux in latest and established models = 0.298153 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 31 components and 0.298153 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.078985Jy  sigma=1.137095
! Fit after  self-cal, rms=0.079033Jy  sigma=1.136589
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.079033Jy  sigma=1.136589
! Fit after  self-cal, rms=0.089256Jy  sigma=1.031788
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.281 mas, bmaj=4.904 mas, bpa=-10.85 degrees
! Estimated noise=0.594131 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00347666 Jy
! Component: 100  -  total flux cleaned = 0.00506822 Jy
! Component: 150  -  total flux cleaned = 0.00583251 Jy
! Component: 200  -  total flux cleaned = 0.00590289 Jy
! Total flux subtracted in 200 components = 0.00590289 Jy
! Clean residual min=-0.002745 max=0.002737 Jy/beam
! Clean residual mean=-0.000001 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.304056 Jy
selfcal
! Performing phase self-cal
! Adding 19 model components to the UV plane model.
! The established model now contains 41 components and 0.304056 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088938Jy  sigma=1.031004
! Fit after  self-cal, rms=0.088948Jy  sigma=1.030540
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000340413 Jy
! Component: 100  -  total flux cleaned = 0.000360008 Jy
! Component: 150  -  total flux cleaned = 0.000377373 Jy
! Component: 200  -  total flux cleaned = 0.000378044 Jy
! Total flux subtracted in 200 components = 0.000378044 Jy
! Clean residual min=-0.002773 max=0.002758 Jy/beam
! Clean residual mean=-0.000001 rms=0.000732 Jy/beam
! Combined flux in latest and established models = 0.304434 Jy
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 44 components and 0.304434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088931Jy  sigma=1.030491
! Fit after  self-cal, rms=0.088930Jy  sigma=1.030478
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.088930Jy  sigma=1.030478
! Fit after  self-cal, rms=0.060982Jy  sigma=0.940473
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.283 mas, bmaj=4.898 mas, bpa=-11.58 degrees
! Estimated noise=0.594127 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00052921 Jy
! Component: 100  -  total flux cleaned = 0.000530265 Jy
! Component: 150  -  total flux cleaned = 0.000530484 Jy
! Component: 200  -  total flux cleaned = 0.00051636 Jy
! Total flux subtracted in 200 components = 0.00051636 Jy
! Clean residual min=-0.002164 max=0.002234 Jy/beam
! Clean residual mean=-0.000003 rms=0.000513 Jy/beam
! Combined flux in latest and established models = 0.304951 Jy
selfcal
! Performing phase self-cal
! Adding 9 model components to the UV plane model.
! The established model now contains 49 components and 0.304951 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060970Jy  sigma=0.940245
! Fit after  self-cal, rms=0.060985Jy  sigma=0.939913
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-105.5, -103).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000951175 Jy
! Component: 100  -  total flux cleaned = 0.000860915 Jy
! Component: 150  -  total flux cleaned = 0.000782932 Jy
! Component: 200  -  total flux cleaned = 0.000782186 Jy
! Total flux subtracted in 200 components = 0.000782186 Jy
! Clean residual min=-0.002194 max=0.002035 Jy/beam
! Clean residual mean=-0.000004 rms=0.000506 Jy/beam
! Combined flux in latest and established models = 0.305733 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 66 components and 0.305733 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060912Jy  sigma=0.938532
! Fit after  self-cal, rms=0.060909Jy  sigma=0.938466
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060909Jy  sigma=0.938466
! Fit after  self-cal, rms=0.060926Jy  sigma=0.938365
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.657 mas, bmaj=9.027 mas, bpa=-45.92 degrees
! Estimated noise=0.745172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000381875 Jy
! Component: 100  -  total flux cleaned = 0.000183324 Jy
! Component: 150  -  total flux cleaned = 4.41846e-05 Jy
! Component: 200  -  total flux cleaned = -7.19631e-05 Jy
! Total flux subtracted in 200 components = -7.19631e-05 Jy
! Clean residual min=-0.002153 max=0.002188 Jy/beam
! Clean residual mean=-0.000008 rms=0.000614 Jy/beam
! Combined flux in latest and established models = 0.305661 Jy
selfcal
! Performing phase self-cal
! Adding 15 model components to the UV plane model.
! The established model now contains 80 components and 0.305661 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060926Jy  sigma=0.938295
! Fit after  self-cal, rms=0.060920Jy  sigma=0.938229
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -2.35182e-05 Jy
! Component: 100  -  total flux cleaned = -0.000131438 Jy
! Component: 150  -  total flux cleaned = -0.000208308 Jy
! Component: 200  -  total flux cleaned = -0.000276219 Jy
! Total flux subtracted in 200 components = -0.000276219 Jy
! Clean residual min=-0.002155 max=0.002154 Jy/beam
! Clean residual mean=-0.000008 rms=0.000613 Jy/beam
! Combined flux in latest and established models = 0.305385 Jy
! Performing phase self-cal
! Adding 17 model components to the UV plane model.
! The established model now contains 84 components and 0.305385 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060925Jy  sigma=0.938259
! Fit after  self-cal, rms=0.060921Jy  sigma=0.938228
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=4.282 mas, bmaj=4.893 mas, bpa=-11.7 degrees
! Estimated noise=0.594226 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.282 x 4.893 at -11.7 degrees (North through East)
! Clean map  min=-0.0021363  max=0.27814 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=3.459 mas, bmaj=4.169 mas, bpa=-19.24 degrees
! Estimated noise=0.826701 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.213468 Jy
! Component: 100  -  total flux cleaned = 0.263429 Jy
! Component: 150  -  total flux cleaned = 0.283371 Jy
! Component: 200  -  total flux cleaned = 0.293471 Jy
! Total flux subtracted in 200 components = 0.293471 Jy
! Clean residual min=-0.003402 max=0.005757 Jy/beam
! Clean residual mean=-0.000002 rms=0.000834 Jy/beam
! Combined flux in latest and established models = 0.293471 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 16 model components to the UV plane model.
! The established model now contains 16 components and 0.293471 Jy
! Inverting map and beam 
! Estimated beam: bmin=4.282 mas, bmaj=4.893 mas, bpa=-11.7 degrees
! Estimated noise=0.594226 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00656348 Jy
! Component: 100  -  total flux cleaned = 0.00997853 Jy
! Component: 150  -  total flux cleaned = 0.0114262 Jy
! Component: 200  -  total flux cleaned = 0.0120126 Jy
! Total flux subtracted in 200 components = 0.0120126 Jy
! Clean residual min=-0.002263 max=0.002525 Jy/beam
! Clean residual mean=-0.000004 rms=0.000515 Jy/beam
! Combined flux in latest and established models = 0.305483 Jy
! Adding 18 model components to the UV plane model.
! The established model now contains 29 components and 0.305483 Jy
! Inverting map 
! Added new window around map position (1.5, 6.5).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00227636 Jy
! Component: 100  -  total flux cleaned = 0.0026435 Jy
! Component: 150  -  total flux cleaned = 0.00273293 Jy
! Component: 200  -  total flux cleaned = 0.00285449 Jy
! Total flux subtracted in 200 components = 0.00285449 Jy
! Clean residual min=-0.002225 max=0.001997 Jy/beam
! Clean residual mean=-0.000003 rms=0.000502 Jy/beam
! Combined flux in latest and established models = 0.308338 Jy
! Adding 25 model components to the UV plane model.
! The established model now contains 50 components and 0.308338 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=8.657 mas, bmaj=9.027 mas, bpa=-45.92 degrees
! Estimated noise=0.745172 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000558372 Jy
! Component: 100  -  total flux cleaned = -0.000766049 Jy
! Component: 150  -  total flux cleaned = -0.000791595 Jy
! Component: 200  -  total flux cleaned = -0.00083557 Jy
! Total flux subtracted in 200 components = -0.00083557 Jy
! Clean residual min=-0.002301 max=0.002235 Jy/beam
! Clean residual mean=-0.000006 rms=0.000607 Jy/beam
! Combined flux in latest and established models = 0.307502 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -1.86412e-05 Jy
! Component: 100  -  total flux cleaned = -3.41501e-05 Jy
! Component: 150  -  total flux cleaned = -6.41663e-05 Jy
! Component: 200  -  total flux cleaned = -7.76116e-05 Jy
! Total flux subtracted in 200 components = -7.76116e-05 Jy
! Clean residual min=-0.002293 max=0.002250 Jy/beam
! Clean residual mean=-0.000006 rms=0.000606 Jy/beam
! Combined flux in latest and established models = 0.307425 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 79 components and 0.307425 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=4.282 mas, bmaj=4.893 mas, bpa=-11.7 degrees
! Estimated noise=0.594226 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000614352 Jy
! Component: 100  -  total flux cleaned = 0.000686278 Jy
! Component: 150  -  total flux cleaned = 0.000687371 Jy
! Component: 200  -  total flux cleaned = 0.00075148 Jy
! Total flux subtracted in 200 components = 0.00075148 Jy
! Clean residual min=-0.002176 max=0.002053 Jy/beam
! Clean residual mean=-0.000003 rms=0.000497 Jy/beam
! Combined flux in latest and established models = 0.308176 Jy
selfcal
! Performing phase self-cal
! Adding 25 model components to the UV plane model.
! The established model now contains 94 components and 0.308176 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060879Jy  sigma=0.937452
! Fit after  self-cal, rms=0.060872Jy  sigma=0.937284
wmodel J1343+6602_S_map.mod
! Writing 94 model components to file: J1343+6602_S_map.mod
wobs   J1343+6602_S_uvs.fits
! Writing UV FITS file: J1343+6602_S_uvs.fits
wwins  J1343+6602_S_map.win
! wwins: Wrote 3 windows to J1343+6602_S_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = -0.000369653 Jy
! Component: 100  -  total flux cleaned = -0.000512194 Jy
! Component: 150  -  total flux cleaned = -0.000783612 Jy
! Component: 200  -  total flux cleaned = -0.000980691 Jy
! Component: 250  -  total flux cleaned = -0.00107639 Jy
! Component: 300  -  total flux cleaned = -0.00117014 Jy
! Component: 350  -  total flux cleaned = -0.00123145 Jy
! Component: 400  -  total flux cleaned = -0.00126169 Jy
! Component: 450  -  total flux cleaned = -0.00132177 Jy
! Component: 500  -  total flux cleaned = -0.00138081 Jy
! Component: 550  -  total flux cleaned = -0.00146777 Jy
! Component: 600  -  total flux cleaned = -0.00149573 Jy
! Component: 650  -  total flux cleaned = -0.00149572 Jy
! Component: 700  -  total flux cleaned = -0.00155155 Jy
! Component: 750  -  total flux cleaned = -0.00155161 Jy
! Component: 800  -  total flux cleaned = -0.00157912 Jy
! Component: 850  -  total flux cleaned = -0.00160607 Jy
! Component: 900  -  total flux cleaned = -0.00160587 Jy
! Component: 950  -  total flux cleaned = -0.0015524 Jy
! Component: 1000  -  total flux cleaned = -0.00157857 Jy
! Component: 1050  -  total flux cleaned = -0.00163096 Jy
! Component: 1100  -  total flux cleaned = -0.00155269 Jy
! Component: 1150  -  total flux cleaned = -0.00155308 Jy
! Component: 1200  -  total flux cleaned = -0.00165559 Jy
! Component: 1250  -  total flux cleaned = -0.00147726 Jy
! Component: 1300  -  total flux cleaned = -0.00155304 Jy
! Component: 1350  -  total flux cleaned = -0.00152804 Jy
! Component: 1400  -  total flux cleaned = -0.00147771 Jy
! Component: 1450  -  total flux cleaned = -0.00140356 Jy
! Component: 1500  -  total flux cleaned = -0.00137887 Jy
! Component: 1550  -  total flux cleaned = -0.00130566 Jy
! Component: 1600  -  total flux cleaned = -0.00137831 Jy
! Component: 1650  -  total flux cleaned = -0.00120945 Jy
! Component: 1700  -  total flux cleaned = -0.00128126 Jy
! Component: 1750  -  total flux cleaned = -0.00125742 Jy
! Component: 1800  -  total flux cleaned = -0.0011863 Jy
! Component: 1850  -  total flux cleaned = -0.00123351 Jy
! Component: 1900  -  total flux cleaned = -0.00118643 Jy
! Component: 1950  -  total flux cleaned = -0.00116319 Jy
! Component: 2000  -  total flux cleaned = -0.00113993 Jy
! Component: 2050  -  total flux cleaned = -0.00102492 Jy
! Component: 2100  -  total flux cleaned = -0.00100222 Jy
! Component: 2150  -  total flux cleaned = -0.00107054 Jy
! Component: 2200  -  total flux cleaned = -0.000934712 Jy
! Component: 2250  -  total flux cleaned = -0.000957176 Jy
! Component: 2300  -  total flux cleaned = -0.000934732 Jy
! Component: 2350  -  total flux cleaned = -0.000845657 Jy
! Component: 2400  -  total flux cleaned = -0.000779374 Jy
! Component: 2450  -  total flux cleaned = -0.000735343 Jy
! Component: 2500  -  total flux cleaned = -0.000866889 Jy
! Component: 2550  -  total flux cleaned = -0.000801521 Jy
! Component: 2600  -  total flux cleaned = -0.00071484 Jy
! Component: 2650  -  total flux cleaned = -0.000693255 Jy
! Component: 2700  -  total flux cleaned = -0.000650243 Jy
! Component: 2750  -  total flux cleaned = -0.000564719 Jy
! Component: 2800  -  total flux cleaned = -0.000500865 Jy
! Component: 2850  -  total flux cleaned = -0.000564459 Jy
! Component: 2900  -  total flux cleaned = -0.000543496 Jy
! Component: 2950  -  total flux cleaned = -0.000459387 Jy
! Component: 3000  -  total flux cleaned = -0.000501083 Jy
! Component: 3050  -  total flux cleaned = -0.000459514 Jy
! Component: 3100  -  total flux cleaned = -0.000459491 Jy
! Component: 3150  -  total flux cleaned = -0.000376804 Jy
! Component: 3200  -  total flux cleaned = -0.000356279 Jy
! Component: 3250  -  total flux cleaned = -0.000438053 Jy
! Component: 3300  -  total flux cleaned = -0.000376953 Jy
! Component: 3350  -  total flux cleaned = -0.000458015 Jy
! Component: 3400  -  total flux cleaned = -0.000457976 Jy
! Component: 3450  -  total flux cleaned = -0.000417643 Jy
! Component: 3500  -  total flux cleaned = -0.000437741 Jy
! Component: 3550  -  total flux cleaned = -0.000377908 Jy
! Component: 3600  -  total flux cleaned = -0.000457265 Jy
! Component: 3650  -  total flux cleaned = -0.000457367 Jy
! Component: 3700  -  total flux cleaned = -0.000457482 Jy
! Component: 3750  -  total flux cleaned = -0.000378915 Jy
! Component: 3800  -  total flux cleaned = -0.000476763 Jy
! Component: 3850  -  total flux cleaned = -0.000535456 Jy
! Component: 3900  -  total flux cleaned = -0.000496554 Jy
! Component: 3950  -  total flux cleaned = -0.000515906 Jy
! Component: 4000  -  total flux cleaned = -0.000477288 Jy
! Component: 4050  -  total flux cleaned = -0.000515687 Jy
! Total flux subtracted in 4096 components = -0.000573201 Jy
! Clean residual min=-0.001170 max=0.001175 Jy/beam
! Clean residual mean=-0.000001 rms=0.000367 Jy/beam
! Combined flux in latest and established models = 0.307603 Jy
keep
! Adding 327 model components to the UV plane model.
! The established model now contains 421 components and 0.307603 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv124_uvs/J1343+6602_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 4.282 x 4.893 at -11.7 degrees (North through East)
! Clean map  min=-0.0019481  max=0.27828 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv124_uvs/J1343+6602_S_map.fits
wmodel /scr/pima/rv124_uvs/J1343+6602_S_map.mod
! Writing 421 model components to file: /scr/pima/rv124_uvs/J1343+6602_S_map.mod
wobs   /scr/pima/rv124_uvs/J1343+6602_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv124_uvs/J1343+6602_S_uvs.fits
wwins  /scr/pima/rv124_uvs/J1343+6602_S_map.win
! wwins: Wrote 4 windows to /scr/pima/rv124_uvs/J1343+6602_S_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.278283 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000366142 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.394715 0.394715 0.78943 1.57886 3.15772 6.31544 12.6309 25.2617 50.5235
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.278 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  760.042 
quit
! Quitting program
! Log file /scr/pima/rv124_uvs/J1343+6602_S_dfm.log closed on Mon Dec 24 01:42:08 2018