! Started logfile: /scr/pima/rv124_uvs/J1012+0630_S_dfm.log on Mon Dec 24 01:40:37 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv124_uvs/J1012+0630_S_uva.fits ! Reading UV FITS file: /scr/pima/rv124_uvs/J1012+0630_S_uva.fits ! AN table 1: 46 integrations on 45 of 45 possible baselines. ! Apparent sampling: 0.999517 visibilities/baseline/integration-bin. ! Found source: J1012+0630 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 8276 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1012+0630_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 460 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 20 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.006694Jy sigma=16.732217 ! Fit after self-cal, rms=0.896831Jy sigma=14.936844 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.955 mas, bmaj=6.629 mas, bpa=-2.179 degrees ! Estimated noise=0.864945 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0756663 Jy ! Component: 100 - total flux cleaned = 0.100527 Jy ! Total flux subtracted in 100 components = 0.100527 Jy ! Clean residual min=-0.006958 max=0.016600 Jy/beam ! Clean residual mean=-0.000025 rms=0.001942 Jy/beam ! Combined flux in latest and established models = 0.100528 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.100528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.074992Jy sigma=1.128704 ! Fit after self-cal, rms=0.074612Jy sigma=1.123421 ! Inverting map ! Added new window around map position (4, -1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0166668 Jy ! Component: 100 - total flux cleaned = 0.025738 Jy ! Total flux subtracted in 100 components = 0.025738 Jy ! Clean residual min=-0.005316 max=0.006287 Jy/beam ! Clean residual mean=-0.000015 rms=0.001413 Jy/beam ! Combined flux in latest and established models = 0.126265 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 28 components and 0.126265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.069803Jy sigma=1.043695 ! Fit after self-cal, rms=0.069622Jy sigma=1.040347 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.529 mas, bmaj=7.566 mas, bpa=-3.053 degrees ! Estimated noise=0.562362 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00830462 Jy ! Component: 100 - total flux cleaned = 0.012765 Jy ! Component: 150 - total flux cleaned = 0.0152624 Jy ! Component: 200 - total flux cleaned = 0.0159143 Jy ! Total flux subtracted in 200 components = 0.0159143 Jy ! Clean residual min=-0.004929 max=0.004798 Jy/beam ! Clean residual mean=-0.000011 rms=0.001228 Jy/beam ! Combined flux in latest and established models = 0.14218 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 44 components and 0.14218 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.068410Jy sigma=1.024808 ! Fit after self-cal, rms=0.068343Jy sigma=1.023624 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.529 x 7.566 at -3.053 degrees (North through East) ! Clean map min=-0.0041765 max=0.10214 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.08 HN 0.89 KP 0.95 ! LA 0.88 MK 1.14 NL 1.10 OV 0.94 ! PT 1.07 SC 1.02 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 1.12 HN 0.90 KP 0.96 ! LA 0.91 MK 1.15 NL 1.13 OV 0.82 ! PT 1.06 SC 0.91 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.06 HN 0.94 KP 0.98 ! LA 0.93 MK 1.05 NL 1.11 OV 0.97 ! PT 1.07 SC 0.99 ! ! ! Fit before self-cal, rms=0.068343Jy sigma=1.023624 ! Fit after self-cal, rms=0.066595Jy sigma=0.997301 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.571 mas, bmaj=7.615 mas, bpa=-1.883 degrees ! Estimated noise=0.563612 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000970097 Jy ! Component: 100 - total flux cleaned = 0.000923279 Jy ! Component: 150 - total flux cleaned = 0.000924231 Jy ! Component: 200 - total flux cleaned = 0.000846106 Jy ! Total flux subtracted in 200 components = 0.000846106 Jy ! Clean residual min=-0.003508 max=0.003758 Jy/beam ! Clean residual mean=-0.000007 rms=0.000896 Jy/beam ! Combined flux in latest and established models = 0.143026 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 56 components and 0.143026 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066467Jy sigma=0.996265 ! Fit after self-cal, rms=0.066523Jy sigma=0.995550 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.066523Jy sigma=0.995550 ! Fit after self-cal, rms=0.064070Jy sigma=0.969717 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=7.572 mas, bpa=-2.064 degrees ! Estimated noise=0.561809 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.92781e-05 Jy ! Component: 100 - total flux cleaned = -0.000135142 Jy ! Component: 150 - total flux cleaned = -0.000136139 Jy ! Component: 200 - total flux cleaned = -8.40533e-05 Jy ! Total flux subtracted in 200 components = -8.40533e-05 Jy ! Clean residual min=-0.002302 max=0.003033 Jy/beam ! Clean residual mean=-0.000010 rms=0.000632 Jy/beam ! Combined flux in latest and established models = 0.142942 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 64 components and 0.142942 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064034Jy sigma=0.969211 ! Fit after self-cal, rms=0.064066Jy sigma=0.968871 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (13.5, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00322995 Jy ! Component: 100 - total flux cleaned = 0.00513291 Jy ! Component: 150 - total flux cleaned = 0.00637471 Jy ! Component: 200 - total flux cleaned = 0.00680611 Jy ! Total flux subtracted in 200 components = 0.00680611 Jy ! Clean residual min=-0.002198 max=0.002338 Jy/beam ! Clean residual mean=-0.000005 rms=0.000548 Jy/beam ! Combined flux in latest and established models = 0.149748 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 98 components and 0.149748 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063895Jy sigma=0.965366 ! Fit after self-cal, rms=0.063876Jy sigma=0.965117 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063876Jy sigma=0.965117 ! Fit after self-cal, rms=0.063862Jy sigma=0.964872 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.561 mas, bmaj=7.567 mas, bpa=-2.026 degrees ! Estimated noise=0.559371 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00119355 Jy ! Component: 100 - total flux cleaned = 0.00143415 Jy ! Component: 150 - total flux cleaned = 0.00154739 Jy ! Component: 200 - total flux cleaned = 0.00157359 Jy ! Total flux subtracted in 200 components = 0.00157359 Jy ! Clean residual min=-0.002076 max=0.002141 Jy/beam ! Clean residual mean=-0.000005 rms=0.000524 Jy/beam ! Combined flux in latest and established models = 0.151322 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 118 components and 0.151322 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063831Jy sigma=0.964259 ! Fit after self-cal, rms=0.063836Jy sigma=0.964228 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000237441 Jy ! Component: 100 - total flux cleaned = 0.000326475 Jy ! Component: 150 - total flux cleaned = 0.000388233 Jy ! Component: 200 - total flux cleaned = 0.000407616 Jy ! Total flux subtracted in 200 components = 0.000407616 Jy ! Clean residual min=-0.002056 max=0.002104 Jy/beam ! Clean residual mean=-0.000005 rms=0.000520 Jy/beam ! Combined flux in latest and established models = 0.151729 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 125 components and 0.151729 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063821Jy sigma=0.964006 ! Fit after self-cal, rms=0.063821Jy sigma=0.963999 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063821Jy sigma=0.963999 ! Fit after self-cal, rms=0.063810Jy sigma=0.963939 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.511 mas, bmaj=11.38 mas, bpa=-2.893 degrees ! Estimated noise=0.683395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000793556 Jy ! Component: 100 - total flux cleaned = 0.000900761 Jy ! Component: 150 - total flux cleaned = 0.000930816 Jy ! Component: 200 - total flux cleaned = 0.000942911 Jy ! Total flux subtracted in 200 components = 0.000942911 Jy ! Clean residual min=-0.002150 max=0.002451 Jy/beam ! Clean residual mean=-0.000008 rms=0.000624 Jy/beam ! Combined flux in latest and established models = 0.152672 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 139 components and 0.152672 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063807Jy sigma=0.963872 ! Fit after self-cal, rms=0.063807Jy sigma=0.963850 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 7.43825e-05 Jy ! Component: 100 - total flux cleaned = 0.000145324 Jy ! Component: 150 - total flux cleaned = 0.000176219 Jy ! Component: 200 - total flux cleaned = 0.000185955 Jy ! Total flux subtracted in 200 components = 0.000185955 Jy ! Clean residual min=-0.002189 max=0.002420 Jy/beam ! Clean residual mean=-0.000007 rms=0.000620 Jy/beam ! Combined flux in latest and established models = 0.152858 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 148 components and 0.152858 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063806Jy sigma=0.963845 ! Fit after self-cal, rms=0.063804Jy sigma=0.963839 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=7.566 mas, bpa=-1.937 degrees ! Estimated noise=0.558511 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.564 x 7.566 at -1.937 degrees (North through East) ! Clean map min=-0.0019952 max=0.1018 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.99 mas, bmaj=6.625 mas, bpa=-1.1 degrees ! Estimated noise=0.866995 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0760483 Jy ! Component: 100 - total flux cleaned = 0.103133 Jy ! Component: 150 - total flux cleaned = 0.11797 Jy ! Component: 200 - total flux cleaned = 0.126763 Jy ! Total flux subtracted in 200 components = 0.126763 Jy ! Clean residual min=-0.004394 max=0.004458 Jy/beam ! Clean residual mean=-0.000015 rms=0.000971 Jy/beam ! Combined flux in latest and established models = 0.126763 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 21 model components to the UV plane model. ! The established model now contains 21 components and 0.126763 Jy ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=7.566 mas, bpa=-1.937 degrees ! Estimated noise=0.558511 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0070787 Jy ! Component: 100 - total flux cleaned = 0.0116877 Jy ! Component: 150 - total flux cleaned = 0.0150645 Jy ! Component: 200 - total flux cleaned = 0.0176348 Jy ! Total flux subtracted in 200 components = 0.0176348 Jy ! Clean residual min=-0.002192 max=0.002662 Jy/beam ! Clean residual mean=-0.000010 rms=0.000573 Jy/beam ! Combined flux in latest and established models = 0.144398 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 61 components and 0.144398 Jy ! Inverting map ! Added new window around map position (-100, -53). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00246935 Jy ! Component: 100 - total flux cleaned = 0.00422134 Jy ! Component: 150 - total flux cleaned = 0.00537116 Jy ! Component: 200 - total flux cleaned = 0.00614687 Jy ! Total flux subtracted in 200 components = 0.00614687 Jy ! Clean residual min=-0.002078 max=0.001974 Jy/beam ! Clean residual mean=-0.000009 rms=0.000514 Jy/beam ! Combined flux in latest and established models = 0.150544 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 86 components and 0.150545 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.511 mas, bmaj=11.38 mas, bpa=-2.893 degrees ! Estimated noise=0.683395 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00157186 Jy ! Component: 100 - total flux cleaned = 0.00240237 Jy ! Component: 150 - total flux cleaned = 0.00267901 Jy ! Component: 200 - total flux cleaned = 0.0028821 Jy ! Total flux subtracted in 200 components = 0.0028821 Jy ! Clean residual min=-0.002450 max=0.002348 Jy/beam ! Clean residual mean=-0.000013 rms=0.000594 Jy/beam ! Combined flux in latest and established models = 0.153427 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000196857 Jy ! Component: 100 - total flux cleaned = 0.000325937 Jy ! Component: 150 - total flux cleaned = 0.000345535 Jy ! Component: 200 - total flux cleaned = 0.00038219 Jy ! Total flux subtracted in 200 components = 0.00038219 Jy ! Clean residual min=-0.002441 max=0.002276 Jy/beam ! Clean residual mean=-0.000012 rms=0.000584 Jy/beam ! Combined flux in latest and established models = 0.153809 Jy ! Adding 55 model components to the UV plane model. ! The established model now contains 128 components and 0.153809 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.564 mas, bmaj=7.566 mas, bpa=-1.937 degrees ! Estimated noise=0.558511 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000282439 Jy ! Component: 100 - total flux cleaned = -0.000367939 Jy ! Component: 150 - total flux cleaned = -0.000367695 Jy ! Component: 200 - total flux cleaned = -0.000391171 Jy ! Total flux subtracted in 200 components = -0.000391171 Jy ! Clean residual min=-0.002157 max=0.001927 Jy/beam ! Clean residual mean=-0.000006 rms=0.000494 Jy/beam ! Combined flux in latest and established models = 0.153418 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 154 components and 0.153418 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063730Jy sigma=0.962688 ! Fit after self-cal, rms=0.063722Jy sigma=0.962533 wmodel J1012+0630_S_map.mod ! Writing 154 model components to file: J1012+0630_S_map.mod wobs J1012+0630_S_uvs.fits ! Writing UV FITS file: J1012+0630_S_uvs.fits wwins J1012+0630_S_map.win ! wwins: Wrote 4 windows to J1012+0630_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000655937 Jy ! Component: 100 - total flux cleaned = -0.00114273 Jy ! Component: 150 - total flux cleaned = -0.00147372 Jy ! Component: 200 - total flux cleaned = -0.0016948 Jy ! Component: 250 - total flux cleaned = -0.00193859 Jy ! Component: 300 - total flux cleaned = -0.0020279 Jy ! Component: 350 - total flux cleaned = -0.00217247 Jy ! Component: 400 - total flux cleaned = -0.00237063 Jy ! Component: 450 - total flux cleaned = -0.0025639 Jy ! Component: 500 - total flux cleaned = -0.00278028 Jy ! Component: 550 - total flux cleaned = -0.00291279 Jy ! Component: 600 - total flux cleaned = -0.00301733 Jy ! Component: 650 - total flux cleaned = -0.00322239 Jy ! Component: 700 - total flux cleaned = -0.00339821 Jy ! Component: 750 - total flux cleaned = -0.00357159 Jy ! Component: 800 - total flux cleaned = -0.00369355 Jy ! Component: 850 - total flux cleaned = -0.00390895 Jy ! Component: 900 - total flux cleaned = -0.00393264 Jy ! Component: 950 - total flux cleaned = -0.00400274 Jy ! Component: 1000 - total flux cleaned = -0.00411823 Jy ! Component: 1050 - total flux cleaned = -0.00423162 Jy ! Component: 1100 - total flux cleaned = -0.00429883 Jy ! Component: 1150 - total flux cleaned = -0.00434285 Jy ! Component: 1200 - total flux cleaned = -0.00443063 Jy ! Component: 1250 - total flux cleaned = -0.00449541 Jy ! Component: 1300 - total flux cleaned = -0.00453839 Jy ! Component: 1350 - total flux cleaned = -0.00466442 Jy ! Component: 1400 - total flux cleaned = -0.00470565 Jy ! Component: 1450 - total flux cleaned = -0.00472647 Jy ! Component: 1500 - total flux cleaned = -0.00484827 Jy ! Component: 1550 - total flux cleaned = -0.00490848 Jy ! Component: 1600 - total flux cleaned = -0.0049681 Jy ! Component: 1650 - total flux cleaned = -0.0050862 Jy ! Component: 1700 - total flux cleaned = -0.00520305 Jy ! Component: 1750 - total flux cleaned = -0.00522227 Jy ! Component: 1800 - total flux cleaned = -0.0053557 Jy ! Component: 1850 - total flux cleaned = -0.00537451 Jy ! Component: 1900 - total flux cleaned = -0.00550534 Jy ! Component: 1950 - total flux cleaned = -0.005561 Jy ! Component: 2000 - total flux cleaned = -0.00557992 Jy ! Component: 2050 - total flux cleaned = -0.0057439 Jy ! Component: 2100 - total flux cleaned = -0.00579829 Jy ! Component: 2150 - total flux cleaned = -0.00585213 Jy ! Component: 2200 - total flux cleaned = -0.00601195 Jy ! Component: 2250 - total flux cleaned = -0.00611738 Jy ! Component: 2300 - total flux cleaned = -0.00618707 Jy ! Component: 2350 - total flux cleaned = -0.00632551 Jy ! Component: 2400 - total flux cleaned = -0.00639411 Jy ! Component: 2450 - total flux cleaned = -0.00646222 Jy ! Component: 2500 - total flux cleaned = -0.00658029 Jy ! Component: 2550 - total flux cleaned = -0.00664712 Jy ! Component: 2600 - total flux cleaned = -0.00669695 Jy ! Component: 2650 - total flux cleaned = -0.00679614 Jy ! Component: 2700 - total flux cleaned = -0.00686155 Jy ! Component: 2750 - total flux cleaned = -0.00699152 Jy ! Component: 2800 - total flux cleaned = -0.00710443 Jy ! Component: 2850 - total flux cleaned = -0.00715235 Jy ! Component: 2900 - total flux cleaned = -0.00732724 Jy ! Component: 2950 - total flux cleaned = -0.00742182 Jy ! Component: 3000 - total flux cleaned = -0.00743753 Jy ! Component: 3050 - total flux cleaned = -0.007562 Jy ! Component: 3100 - total flux cleaned = -0.00759297 Jy ! Component: 3150 - total flux cleaned = -0.00770025 Jy ! Component: 3200 - total flux cleaned = -0.00777645 Jy ! Component: 3250 - total flux cleaned = -0.00788263 Jy ! Component: 3300 - total flux cleaned = -0.00800306 Jy ! Component: 3350 - total flux cleaned = -0.00803308 Jy ! Component: 3400 - total flux cleaned = -0.00815191 Jy ! Component: 3450 - total flux cleaned = -0.00827021 Jy ! Component: 3500 - total flux cleaned = -0.00831412 Jy ! Component: 3550 - total flux cleaned = -0.00837265 Jy ! Component: 3600 - total flux cleaned = -0.00848898 Jy ! Component: 3650 - total flux cleaned = -0.00861878 Jy ! Component: 3700 - total flux cleaned = -0.00871922 Jy ! Component: 3750 - total flux cleaned = -0.00879041 Jy ! Component: 3800 - total flux cleaned = -0.00890393 Jy ! Component: 3850 - total flux cleaned = -0.0089463 Jy ! Component: 3900 - total flux cleaned = -0.00907244 Jy ! Component: 3950 - total flux cleaned = -0.00908634 Jy ! Component: 4000 - total flux cleaned = -0.00918353 Jy ! Component: 4050 - total flux cleaned = -0.00926626 Jy ! Total flux subtracted in 4096 components = -0.00932115 Jy ! Clean residual min=-0.000950 max=0.000842 Jy/beam ! Clean residual mean=-0.000005 rms=0.000251 Jy/beam ! Combined flux in latest and established models = 0.144097 Jy keep ! Adding 278 model components to the UV plane model. ! The established model now contains 432 components and 0.144097 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv124_uvs/J1012+0630_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.564 x 7.566 at -1.937 degrees (North through East) ! Clean map min=-0.0017876 max=0.10147 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv124_uvs/J1012+0630_S_map.fits wmodel /scr/pima/rv124_uvs/J1012+0630_S_map.mod ! Writing 432 model components to file: /scr/pima/rv124_uvs/J1012+0630_S_map.mod wobs /scr/pima/rv124_uvs/J1012+0630_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv124_uvs/J1012+0630_S_uvs.fits wwins /scr/pima/rv124_uvs/J1012+0630_S_map.win ! wwins: Wrote 5 windows to /scr/pima/rv124_uvs/J1012+0630_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.101467 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000249365 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.737278 0.737278 1.47456 2.94911 5.89823 11.7965 23.5929 47.1858 94.3716 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0007 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.101 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 406.902 quit ! Quitting program ! Log file /scr/pima/rv124_uvs/J1012+0630_S_dfm.log closed on Mon Dec 24 01:40:42 2018