! Started logfile: /scr/pima/rv124_uvs/J0659+0813_X_dfm.log on Mon Dec 24 00:17:25 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.2000
float taper_size
taper_size =   70.0
float freq
freq       =    8.36575
obs     /scr/pima/rv124_uvs/J0659+0813_X_uva.fits
! Reading UV FITS file: /scr/pima/rv124_uvs/J0659+0813_X_uva.fits
! AN table 1: 46 integrations on 45 of 45 possible baselines.
! AN table 2: 18 integrations on 10 of 10 possible baselines.
! Apparent sampling: 0.463111 visibilities/baseline/integration-bin.
! *** This seems a bit low - see "help observe" on the binwid argument.
! Found source: J0659+0813
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  8.36575e+09        8e+06          1        8e+06
!  02        2  8.44575e+09        8e+06          1        8e+06
!  03        3  8.80575e+09        8e+06          1        8e+06
!  04        4  8.92575e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 79 lines of history.
! 
! Reading 4168 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.2 
print "taper_size =", taper_size
! taper_size = 70 
![@/opt64/bin/pima_mupet_01.dfm J0659+0813_X]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 204 telescope corrections were flagged in sub-array 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 204 telescope corrections were flagged in sub-array 1.
!  A total of 24 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 204 telescope corrections were flagged in sub-array 1.
!  A total of 52 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 4.
!  A total of 204 telescope corrections were flagged in sub-array 1.
!  A total of 52 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.052685Jy  sigma=18.616721
! Fit after  self-cal, rms=0.685623Jy  sigma=11.889256
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.847 mas, bmaj=1.766 mas, bpa=-8.617 degrees
! Estimated noise=0.991274 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (0, 0).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.25237 Jy
! Component: 100  -  total flux cleaned = 0.327695 Jy
! Total flux subtracted in 100 components = 0.327695 Jy
! Clean residual min=-0.009292 max=0.030409 Jy/beam
! Clean residual mean=0.000032 rms=0.002535 Jy/beam
! Combined flux in latest and established models = 0.327695 Jy
! Performing phase self-cal
! Adding 6 model components to the UV plane model.
! The established model now contains 6 components and 0.327695 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.090179Jy  sigma=1.527434
! Fit after  self-cal, rms=0.089939Jy  sigma=1.523224
! Inverting map 
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0318152 Jy
! Component: 100  -  total flux cleaned = 0.0480158 Jy
! Total flux subtracted in 100 components = 0.0480158 Jy
! Clean residual min=-0.007823 max=0.011716 Jy/beam
! Clean residual mean=-0.000020 rms=0.001823 Jy/beam
! Combined flux in latest and established models = 0.375711 Jy
! Performing phase self-cal
! Adding 12 model components to the UV plane model.
! The established model now contains 16 components and 0.375711 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.076812Jy  sigma=1.250154
! Fit after  self-cal, rms=0.076723Jy  sigma=1.248946
! Inverting map 
! Added new window around map position (2, 4.2).
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0113059 Jy
! Component: 100  -  total flux cleaned = 0.0183605 Jy
! Total flux subtracted in 100 components = 0.0183605 Jy
! Clean residual min=-0.007731 max=0.009936 Jy/beam
! Clean residual mean=-0.000039 rms=0.001709 Jy/beam
! Combined flux in latest and established models = 0.394072 Jy
! Performing phase self-cal
! Adding 13 model components to the UV plane model.
! The established model now contains 26 components and 0.394072 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.074536Jy  sigma=1.204758
! Fit after  self-cal, rms=0.074406Jy  sigma=1.202242
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9174 mas, bmaj=1.869 mas, bpa=-4.339 degrees
! Estimated noise=0.690789 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00976849 Jy
! Component: 100  -  total flux cleaned = 0.0160549 Jy
! Component: 150  -  total flux cleaned = 0.0205393 Jy
! Component: 200  -  total flux cleaned = 0.0223555 Jy
! Total flux subtracted in 200 components = 0.0223555 Jy
! Clean residual min=-0.011683 max=0.011662 Jy/beam
! Clean residual mean=-0.001302 rms=0.002237 Jy/beam
! Combined flux in latest and established models = 0.416427 Jy
! Performing phase self-cal
! Adding 16 model components to the UV plane model.
! The established model now contains 38 components and 0.416427 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.072915Jy  sigma=1.172251
! Fit after  self-cal, rms=0.072837Jy  sigma=1.171050
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9174 x 1.869 at -4.339 degrees (North through East)
! Clean map  min=-0.010801  max=0.30674 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.92     HN        1.04     KP        1.05     
!   LA        0.98     MK        0.98     NL        1.06     OV        1.02     
!   PT        0.87     SC        0.96     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        1.03     NY        0.78     SC        1.04     WN        1.73     
!   WZ        0.95     
! 
! 
! Correcting IF 2.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.03     FD        0.91     HN        1.06     KP        1.06     
!   LA        1.02     MK        0.99     NL        1.06     OV        1.03     
!   PT        0.87     SC        0.93     
! 
!  A total of 18 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        1.05     NY        0.93     SC        0.97     WN        1.61     
!   WZ        1.00     
! 
! 
! Correcting IF 3.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.05     FD        0.93     HN        1.08     KP        1.06     
!   LA        1.02     MK        0.99     NL        1.07     OV        1.02     
!   PT        0.90     SC        0.98     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.96     NY        1.00*    SC        1.02     WN        1.53     
!   WZ        1.05     
! 
! 
! Correcting IF 4.
!  A total of 24 telescope corrections were flagged in sub-array 1.
!  Telescope amplitude corrections in sub-array 1:
!   BR        1.06     FD        0.93     HN        1.10     KP        1.06     
!   LA        1.01     MK        0.99     NL        1.08     OV        1.03     
!   PT        0.90     SC        0.93     
! 
!  A total of 6 telescope corrections were flagged in sub-array 2.
!  Telescope amplitude corrections in sub-array 2:
!   HN        1.12     NY        1.00*    SC        1.12     WN        1.37     
!   WZ        1.01     
! 
! 
! Fit before self-cal, rms=0.072837Jy  sigma=1.171050
! Fit after  self-cal, rms=0.063027Jy  sigma=0.991572
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=0.9618 mas, bmaj=1.912 mas, bpa=-4.145 degrees
! Estimated noise=0.70344 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (-2, 3.2).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00838734 Jy
! Component: 100  -  total flux cleaned = 0.010262 Jy
! Component: 150  -  total flux cleaned = 0.0114713 Jy
! Component: 200  -  total flux cleaned = 0.0122298 Jy
! Total flux subtracted in 200 components = 0.0122298 Jy
! Clean residual min=-0.004760 max=0.004727 Jy/beam
! Clean residual mean=-0.000067 rms=0.000982 Jy/beam
! Combined flux in latest and established models = 0.428657 Jy
! Performing phase self-cal
! Adding 29 model components to the UV plane model.
! The established model now contains 67 components and 0.428657 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061706Jy  sigma=0.960560
! Fit after  self-cal, rms=0.061765Jy  sigma=0.958276
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.061765Jy  sigma=0.958276
! Fit after  self-cal, rms=0.060883Jy  sigma=0.933209
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9614 mas, bmaj=1.91 mas, bpa=-4.231 degrees
! Estimated noise=0.704237 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00392023 Jy
! Component: 100  -  total flux cleaned = 0.00516201 Jy
! Component: 150  -  total flux cleaned = 0.00590178 Jy
! Component: 200  -  total flux cleaned = 0.0062181 Jy
! Total flux subtracted in 200 components = 0.0062181 Jy
! Clean residual min=-0.003307 max=0.003795 Jy/beam
! Clean residual mean=-0.000057 rms=0.000784 Jy/beam
! Combined flux in latest and established models = 0.434875 Jy
selfcal
! Performing phase self-cal
! Adding 28 model components to the UV plane model.
! The established model now contains 81 components and 0.434875 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060525Jy  sigma=0.925318
! Fit after  self-cal, rms=0.060516Jy  sigma=0.924876
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! Added new window around map position (5.6, -27.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00268825 Jy
! Component: 100  -  total flux cleaned = 0.00300738 Jy
! Component: 150  -  total flux cleaned = 0.00329011 Jy
! Component: 200  -  total flux cleaned = 0.0034847 Jy
! Total flux subtracted in 200 components = 0.0034847 Jy
! Clean residual min=-0.003466 max=0.003578 Jy/beam
! Clean residual mean=-0.000075 rms=0.000739 Jy/beam
! Combined flux in latest and established models = 0.438359 Jy
! Performing phase self-cal
! Adding 32 model components to the UV plane model.
! The established model now contains 93 components and 0.438359 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060258Jy  sigma=0.920419
! Fit after  self-cal, rms=0.060248Jy  sigma=0.920184
! Inverting map 
! Added new window around map position (-7.6, 9.4).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00313878 Jy
! Component: 100  -  total flux cleaned = 0.00395925 Jy
! Component: 150  -  total flux cleaned = 0.00428014 Jy
! Component: 200  -  total flux cleaned = 0.00433806 Jy
! Total flux subtracted in 200 components = 0.00433806 Jy
! Clean residual min=-0.003468 max=0.002998 Jy/beam
! Clean residual mean=-0.000098 rms=0.000697 Jy/beam
! Combined flux in latest and established models = 0.442698 Jy
! Performing phase self-cal
! Adding 33 model components to the UV plane model.
! The established model now contains 115 components and 0.442697 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060047Jy  sigma=0.915769
! Fit after  self-cal, rms=0.060034Jy  sigma=0.915501
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.060034Jy  sigma=0.915501
! Fit after  self-cal, rms=0.059790Jy  sigma=0.909788
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.9615 mas, bmaj=1.907 mas, bpa=-4.159 degrees
! Estimated noise=0.704232 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00215123 Jy
! Component: 100  -  total flux cleaned = 0.00309551 Jy
! Component: 150  -  total flux cleaned = 0.00369266 Jy
! Component: 200  -  total flux cleaned = 0.00402001 Jy
! Total flux subtracted in 200 components = 0.00402001 Jy
! Clean residual min=-0.003006 max=0.002874 Jy/beam
! Clean residual mean=-0.000044 rms=0.000644 Jy/beam
! Combined flux in latest and established models = 0.446717 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 131 components and 0.446718 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059658Jy  sigma=0.907127
! Fit after  self-cal, rms=0.059652Jy  sigma=0.907043
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000330481 Jy
! Component: 100  -  total flux cleaned = 0.000531783 Jy
! Component: 150  -  total flux cleaned = 0.000719568 Jy
! Component: 200  -  total flux cleaned = 0.000719449 Jy
! Total flux subtracted in 200 components = 0.000719449 Jy
! Clean residual min=-0.002982 max=0.002869 Jy/beam
! Clean residual mean=-0.000048 rms=0.000631 Jy/beam
! Combined flux in latest and established models = 0.447437 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 137 components and 0.447437 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059576Jy  sigma=0.905724
! Fit after  self-cal, rms=0.059577Jy  sigma=0.905692
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059577Jy  sigma=0.905692
! Fit after  self-cal, rms=0.059540Jy  sigma=0.905268
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.371 mas, bmaj=3.024 mas, bpa=1.188 degrees
! Estimated noise=0.855977 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00128 Jy
! Component: 100  -  total flux cleaned = 0.00190743 Jy
! Component: 150  -  total flux cleaned = 0.00228285 Jy
! Component: 200  -  total flux cleaned = 0.00252142 Jy
! Total flux subtracted in 200 components = 0.00252142 Jy
! Clean residual min=-0.002882 max=0.002998 Jy/beam
! Clean residual mean=-0.000069 rms=0.000737 Jy/beam
! Combined flux in latest and established models = 0.449958 Jy
selfcal
! Performing phase self-cal
! Adding 37 model components to the UV plane model.
! The established model now contains 169 components and 0.449958 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059520Jy  sigma=0.904185
! Fit after  self-cal, rms=0.059514Jy  sigma=0.904109
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00017974 Jy
! Component: 100  -  total flux cleaned = 0.000347018 Jy
! Component: 150  -  total flux cleaned = 0.000497167 Jy
! Component: 200  -  total flux cleaned = 0.000579814 Jy
! Total flux subtracted in 200 components = 0.000579814 Jy
! Clean residual min=-0.002812 max=0.002875 Jy/beam
! Clean residual mean=-0.000076 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.450538 Jy
! Performing phase self-cal
! Adding 31 model components to the UV plane model.
! The established model now contains 184 components and 0.450538 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059510Jy  sigma=0.903868
! Fit after  self-cal, rms=0.059509Jy  sigma=0.903840
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=0.9615 mas, bmaj=1.906 mas, bpa=-4.115 degrees
! Estimated noise=0.704447 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9615 x 1.906 at -4.115 degrees (North through East)
! Clean map  min=-0.0027609  max=0.3111 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=0.8545 mas, bmaj=1.78 mas, bpa=-7.76 degrees
! Estimated noise=1.00662 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.254495 Jy
! Component: 100  -  total flux cleaned = 0.331496 Jy
! Component: 150  -  total flux cleaned = 0.36294 Jy
! Component: 200  -  total flux cleaned = 0.379766 Jy
! Total flux subtracted in 200 components = 0.379766 Jy
! Clean residual min=-0.005172 max=0.008948 Jy/beam
! Clean residual mean=0.000063 rms=0.001286 Jy/beam
! Combined flux in latest and established models = 0.379766 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 21 model components to the UV plane model.
! The established model now contains 21 components and 0.379766 Jy
! Inverting map and beam 
! Estimated beam: bmin=0.9615 mas, bmaj=1.906 mas, bpa=-4.115 degrees
! Estimated noise=0.704447 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0155903 Jy
! Component: 100  -  total flux cleaned = 0.0261549 Jy
! Component: 150  -  total flux cleaned = 0.0340607 Jy
! Component: 200  -  total flux cleaned = 0.0402887 Jy
! Total flux subtracted in 200 components = 0.0402887 Jy
! Clean residual min=-0.003360 max=0.004096 Jy/beam
! Clean residual mean=0.000124 rms=0.000883 Jy/beam
! Combined flux in latest and established models = 0.420054 Jy
! Adding 39 model components to the UV plane model.
! The established model now contains 55 components and 0.420054 Jy
! Inverting map 
! Added new window around map position (-0.6, 1.8).
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00513311 Jy
! Component: 100  -  total flux cleaned = 0.00936628 Jy
! Component: 150  -  total flux cleaned = 0.0129406 Jy
! Component: 200  -  total flux cleaned = 0.0159723 Jy
! Total flux subtracted in 200 components = 0.0159723 Jy
! Clean residual min=-0.003130 max=0.002881 Jy/beam
! Clean residual mean=0.000041 rms=0.000687 Jy/beam
! Combined flux in latest and established models = 0.436027 Jy
! Adding 35 model components to the UV plane model.
! The established model now contains 76 components and 0.436026 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.371 mas, bmaj=3.024 mas, bpa=1.188 degrees
! Estimated noise=0.855977 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00349131 Jy
! Component: 100  -  total flux cleaned = 0.00599321 Jy
! Component: 150  -  total flux cleaned = 0.00749566 Jy
! Component: 200  -  total flux cleaned = 0.0086172 Jy
! Total flux subtracted in 200 components = 0.0086172 Jy
! Clean residual min=-0.002947 max=0.003067 Jy/beam
! Clean residual mean=-0.000010 rms=0.000746 Jy/beam
! Combined flux in latest and established models = 0.444644 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000952778 Jy
! Component: 100  -  total flux cleaned = 0.00158312 Jy
! Component: 150  -  total flux cleaned = 0.00213339 Jy
! Component: 200  -  total flux cleaned = 0.00254237 Jy
! Total flux subtracted in 200 components = 0.00254237 Jy
! Clean residual min=-0.002901 max=0.002907 Jy/beam
! Clean residual mean=-0.000039 rms=0.000722 Jy/beam
! Combined flux in latest and established models = 0.447186 Jy
! Adding 72 model components to the UV plane model.
! The established model now contains 136 components and 0.447186 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=0.9615 mas, bmaj=1.906 mas, bpa=-4.115 degrees
! Estimated noise=0.704447 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000265344 Jy
! Component: 100  -  total flux cleaned = 0.000662387 Jy
! Component: 150  -  total flux cleaned = 0.000917819 Jy
! Component: 200  -  total flux cleaned = 0.000919665 Jy
! Total flux subtracted in 200 components = 0.000919665 Jy
! Clean residual min=-0.002871 max=0.003114 Jy/beam
! Clean residual mean=-0.000023 rms=0.000610 Jy/beam
! Combined flux in latest and established models = 0.448106 Jy
selfcal
! Performing phase self-cal
! Adding 27 model components to the UV plane model.
! The established model now contains 155 components and 0.448106 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.059591Jy  sigma=0.905054
! Fit after  self-cal, rms=0.059522Jy  sigma=0.904130
wmodel J0659+0813_X_map.mod
! Writing 155 model components to file: J0659+0813_X_map.mod
wobs   J0659+0813_X_uvs.fits
! Writing UV FITS file: J0659+0813_X_uvs.fits
wwins  J0659+0813_X_map.win
! wwins: Wrote 6 windows to J0659+0813_X_map.win
x = (field_size-8) * field_cell / 4
addwin -x,x,-x,x
clean (field_size*4),0.01
! Inverting map 
! clean: niter=4096  gain=0.01  cutoff=0
! Component: 050  -  total flux cleaned = 8.20133e-05 Jy
! Component: 100  -  total flux cleaned = 0.000355846 Jy
! Component: 150  -  total flux cleaned = 0.000440974 Jy
! Component: 200  -  total flux cleaned = 0.000522689 Jy
! Component: 250  -  total flux cleaned = 0.00044236 Jy
! Component: 300  -  total flux cleaned = 0.000481861 Jy
! Component: 350  -  total flux cleaned = 0.000444461 Jy
! Component: 400  -  total flux cleaned = 0.000407603 Jy
! Component: 450  -  total flux cleaned = 0.000407946 Jy
! Component: 500  -  total flux cleaned = 0.00037175 Jy
! Component: 550  -  total flux cleaned = 0.00037161 Jy
! Component: 600  -  total flux cleaned = 0.000268125 Jy
! Component: 650  -  total flux cleaned = 0.00037274 Jy
! Component: 700  -  total flux cleaned = 0.000407303 Jy
! Component: 750  -  total flux cleaned = 0.000474027 Jy
! Component: 800  -  total flux cleaned = 0.000408363 Jy
! Component: 850  -  total flux cleaned = 0.000409035 Jy
! Component: 900  -  total flux cleaned = 0.000505739 Jy
! Component: 950  -  total flux cleaned = 0.00050555 Jy
! Component: 1000  -  total flux cleaned = 0.000537408 Jy
! Component: 1050  -  total flux cleaned = 0.000568684 Jy
! Component: 1100  -  total flux cleaned = 0.000599762 Jy
! Component: 1150  -  total flux cleaned = 0.000660956 Jy
! Component: 1200  -  total flux cleaned = 0.000660916 Jy
! Component: 1250  -  total flux cleaned = 0.000691284 Jy
! Component: 1300  -  total flux cleaned = 0.000780688 Jy
! Component: 1350  -  total flux cleaned = 0.000839599 Jy
! Component: 1400  -  total flux cleaned = 0.000781337 Jy
! Component: 1450  -  total flux cleaned = 0.000868188 Jy
! Component: 1500  -  total flux cleaned = 0.00086811 Jy
! Component: 1550  -  total flux cleaned = 0.000896668 Jy
! Component: 1600  -  total flux cleaned = 0.000896565 Jy
! Component: 1650  -  total flux cleaned = 0.000924379 Jy
! Component: 1700  -  total flux cleaned = 0.000869044 Jy
! Component: 1750  -  total flux cleaned = 0.000786677 Jy
! Component: 1800  -  total flux cleaned = 0.000786947 Jy
! Component: 1850  -  total flux cleaned = 0.000733068 Jy
! Component: 1900  -  total flux cleaned = 0.000759927 Jy
! Component: 1950  -  total flux cleaned = 0.000680043 Jy
! Component: 2000  -  total flux cleaned = 0.000679946 Jy
! Component: 2050  -  total flux cleaned = 0.000627581 Jy
! Component: 2100  -  total flux cleaned = 0.000601281 Jy
! Component: 2150  -  total flux cleaned = 0.000549536 Jy
! Component: 2200  -  total flux cleaned = 0.000421239 Jy
! Component: 2250  -  total flux cleaned = 0.000421341 Jy
! Component: 2300  -  total flux cleaned = 0.000421382 Jy
! Component: 2350  -  total flux cleaned = 0.000371092 Jy
! Component: 2400  -  total flux cleaned = 0.000296071 Jy
! Component: 2450  -  total flux cleaned = 0.000271128 Jy
! Component: 2500  -  total flux cleaned = 0.000221455 Jy
! Component: 2550  -  total flux cleaned = 0.000221494 Jy
! Component: 2600  -  total flux cleaned = 0.000197009 Jy
! Component: 2650  -  total flux cleaned = 0.000124127 Jy
! Component: 2700  -  total flux cleaned = 0.00010012 Jy
! Component: 2750  -  total flux cleaned = 0.000148284 Jy
! Component: 2800  -  total flux cleaned = 0.000124011 Jy
! Component: 2850  -  total flux cleaned = 5.27244e-05 Jy
! Component: 2900  -  total flux cleaned = 5.28867e-05 Jy
! Component: 2950  -  total flux cleaned = 2.92615e-05 Jy
! Component: 3000  -  total flux cleaned = 5.93416e-06 Jy
! Component: 3050  -  total flux cleaned = -6.3741e-05 Jy
! Component: 3100  -  total flux cleaned = -4.06865e-05 Jy
! Component: 3150  -  total flux cleaned = -6.37674e-05 Jy
! Component: 3200  -  total flux cleaned = -0.000155294 Jy
! Component: 3250  -  total flux cleaned = -0.000177918 Jy
! Component: 3300  -  total flux cleaned = -0.000177974 Jy
! Component: 3350  -  total flux cleaned = -0.000200394 Jy
! Component: 3400  -  total flux cleaned = -0.000222937 Jy
! Component: 3450  -  total flux cleaned = -0.000267542 Jy
! Component: 3500  -  total flux cleaned = -0.000289783 Jy
! Component: 3550  -  total flux cleaned = -0.000311981 Jy
! Component: 3600  -  total flux cleaned = -0.000355869 Jy
! Component: 3650  -  total flux cleaned = -0.00037782 Jy
! Component: 3700  -  total flux cleaned = -0.000421255 Jy
! Component: 3750  -  total flux cleaned = -0.000399575 Jy
! Component: 3800  -  total flux cleaned = -0.000421084 Jy
! Component: 3850  -  total flux cleaned = -0.000442521 Jy
! Component: 3900  -  total flux cleaned = -0.000506562 Jy
! Component: 3950  -  total flux cleaned = -0.000527648 Jy
! Component: 4000  -  total flux cleaned = -0.000464395 Jy
! Component: 4050  -  total flux cleaned = -0.000548689 Jy
! Total flux subtracted in 4096 components = -0.000548695 Jy
! Clean residual min=-0.001211 max=0.001607 Jy/beam
! Clean residual mean=-0.000023 rms=0.000361 Jy/beam
! Combined flux in latest and established models = 0.447557 Jy
keep
! Adding 316 model components to the UV plane model.
! The established model now contains 471 components and 0.447557 Jy
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
wmap   /scr/pima/rv124_uvs/J0659+0813_X_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 0.9615 x 1.906 at -4.115 degrees (North through East)
! Clean map  min=-0.00216  max=0.31201 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv124_uvs/J0659+0813_X_map.fits
wmodel /scr/pima/rv124_uvs/J0659+0813_X_map.mod
! Writing 471 model components to file: /scr/pima/rv124_uvs/J0659+0813_X_map.mod
wobs   /scr/pima/rv124_uvs/J0659+0813_X_uvs.fits
! Writing UV FITS file: /scr/pima/rv124_uvs/J0659+0813_X_uvs.fits
wwins  /scr/pima/rv124_uvs/J0659+0813_X_map.win
! wwins: Wrote 7 windows to /scr/pima/rv124_uvs/J0659+0813_X_map.win
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.31201 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000358978 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -0.34516 0.34516 0.69032 1.38064 2.76128 5.52256 11.0451 22.0902 44.1805 88.3609
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.001 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.312 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  869.162 
quit
! Quitting program
! Log file /scr/pima/rv124_uvs/J0659+0813_X_dfm.log closed on Mon Dec 24 00:17:28 2018