! Started logfile: /scr/pima/rv124_uvs/J0110-0219_S_dfm.log on Mon Dec 24 01:38:32 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv124_uvs/J0110-0219_S_uva.fits ! Reading UV FITS file: /scr/pima/rv124_uvs/J0110-0219_S_uva.fits ! AN table 1: 45 integrations on 36 of 36 possible baselines. ! Apparent sampling: 0.787037 visibilities/baseline/integration-bin. ! Found source: J0110-0219 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 79 lines of history. ! ! Reading 5100 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0110-0219_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 405 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 53 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.007118Jy sigma=17.576952 ! Fit after self-cal, rms=0.936798Jy sigma=16.322131 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.114 mas, bmaj=7.593 mas, bpa=-4.336 degrees ! Estimated noise=1.02942 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0499799 Jy ! Component: 100 - total flux cleaned = 0.0622316 Jy ! Total flux subtracted in 100 components = 0.0622316 Jy ! Clean residual min=-0.006445 max=0.009242 Jy/beam ! Clean residual mean=0.000003 rms=0.001656 Jy/beam ! Combined flux in latest and established models = 0.0622316 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 15 components and 0.0622316 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.060767Jy sigma=1.007629 ! Fit after self-cal, rms=0.060092Jy sigma=0.994244 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.731 mas, bmaj=8.754 mas, bpa=-5.844 degrees ! Estimated noise=0.67261 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2, -9). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00708075 Jy ! Component: 100 - total flux cleaned = 0.00941729 Jy ! Component: 150 - total flux cleaned = 0.0107336 Jy ! Component: 200 - total flux cleaned = 0.0116895 Jy ! Total flux subtracted in 200 components = 0.0116895 Jy ! Clean residual min=-0.004520 max=0.004817 Jy/beam ! Clean residual mean=0.000004 rms=0.001146 Jy/beam ! Combined flux in latest and established models = 0.0739211 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 30 components and 0.0739211 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.058803Jy sigma=0.970885 ! Fit after self-cal, rms=0.058738Jy sigma=0.969901 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.731 x 8.754 at -5.844 degrees (North through East) ! Clean map min=-0.0049843 max=0.06314 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.05 HN 0.94 KP 0.86 ! MK 1.03 NL 1.15 OV 0.92 PT 1.13 ! SC 0.88 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.33 FD 1.11 HN 0.92 KP 0.85 ! MK 1.15 NL 1.09 OV 0.73 PT 1.05 ! SC 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! MK 0.00* NL 0.00* OV 0.00* PT 0.00* ! SC 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.21 FD 1.01 HN 0.88 KP 0.92 ! MK 1.12 NL 1.12 OV 0.87 PT 1.04 ! SC 0.88 ! ! ! Fit before self-cal, rms=0.058738Jy sigma=0.969901 ! Fit after self-cal, rms=0.056962Jy sigma=0.943534 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.732 mas, bmaj=8.756 mas, bpa=-4.373 degrees ! Estimated noise=0.664563 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000306238 Jy ! Component: 100 - total flux cleaned = 0.000193074 Jy ! Component: 150 - total flux cleaned = -1.10321e-05 Jy ! Component: 200 - total flux cleaned = -1.18371e-05 Jy ! Total flux subtracted in 200 components = -1.18371e-05 Jy ! Clean residual min=-0.002766 max=0.002735 Jy/beam ! Clean residual mean=-0.000000 rms=0.000695 Jy/beam ! Combined flux in latest and established models = 0.0739093 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 47 components and 0.0739093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.056838Jy sigma=0.941840 ! Fit after self-cal, rms=0.057034Jy sigma=0.940092 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.057034Jy sigma=0.940092 ! Fit after self-cal, rms=0.061123Jy sigma=0.933525 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.743 mas, bmaj=8.931 mas, bpa=-4.64 degrees ! Estimated noise=0.665716 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -3.30861e-05 Jy ! Component: 100 - total flux cleaned = -9.68454e-05 Jy ! Component: 150 - total flux cleaned = -0.000239069 Jy ! Component: 200 - total flux cleaned = -0.000314082 Jy ! Total flux subtracted in 200 components = -0.000314082 Jy ! Clean residual min=-0.002183 max=0.002215 Jy/beam ! Clean residual mean=-0.000001 rms=0.000541 Jy/beam ! Combined flux in latest and established models = 0.0735952 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 67 components and 0.0735952 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061092Jy sigma=0.932940 ! Fit after self-cal, rms=0.061179Jy sigma=0.932651 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0001866 Jy ! Component: 100 - total flux cleaned = -0.000258178 Jy ! Component: 150 - total flux cleaned = -0.000303276 Jy ! Component: 200 - total flux cleaned = -0.000345239 Jy ! Total flux subtracted in 200 components = -0.000345239 Jy ! Clean residual min=-0.002183 max=0.002183 Jy/beam ! Clean residual mean=-0.000001 rms=0.000536 Jy/beam ! Combined flux in latest and established models = 0.0732499 Jy ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 73 components and 0.0732499 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061162Jy sigma=0.932369 ! Fit after self-cal, rms=0.061161Jy sigma=0.932353 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061161Jy sigma=0.932353 ! Fit after self-cal, rms=0.061391Jy sigma=0.932262 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.736 mas, bmaj=8.943 mas, bpa=-4.69 degrees ! Estimated noise=0.662312 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000468769 Jy ! Component: 100 - total flux cleaned = -0.000581162 Jy ! Component: 150 - total flux cleaned = -0.000682146 Jy ! Component: 200 - total flux cleaned = -0.000736123 Jy ! Total flux subtracted in 200 components = -0.000736123 Jy ! Clean residual min=-0.002153 max=0.002122 Jy/beam ! Clean residual mean=-0.000001 rms=0.000525 Jy/beam ! Combined flux in latest and established models = 0.0725138 Jy selfcal ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 79 components and 0.0725138 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061377Jy sigma=0.931986 ! Fit after self-cal, rms=0.061383Jy sigma=0.931962 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000204873 Jy ! Component: 100 - total flux cleaned = -0.00025765 Jy ! Component: 150 - total flux cleaned = -0.000289904 Jy ! Component: 200 - total flux cleaned = -0.000304874 Jy ! Total flux subtracted in 200 components = -0.000304874 Jy ! Clean residual min=-0.002135 max=0.002117 Jy/beam ! Clean residual mean=-0.000001 rms=0.000521 Jy/beam ! Combined flux in latest and established models = 0.0722089 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 83 components and 0.0722089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061374Jy sigma=0.931807 ! Fit after self-cal, rms=0.061373Jy sigma=0.931796 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061373Jy sigma=0.931796 ! Fit after self-cal, rms=0.061338Jy sigma=0.931749 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.548 mas, bmaj=12.63 mas, bpa=-2.21 degrees ! Estimated noise=0.774986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00061685 Jy ! Component: 100 - total flux cleaned = -0.000831755 Jy ! Component: 150 - total flux cleaned = -0.000902439 Jy ! Component: 200 - total flux cleaned = -0.000952698 Jy ! Total flux subtracted in 200 components = -0.000952698 Jy ! Clean residual min=-0.001997 max=0.002241 Jy/beam ! Clean residual mean=-0.000001 rms=0.000589 Jy/beam ! Combined flux in latest and established models = 0.0712562 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 97 components and 0.0712562 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061334Jy sigma=0.931674 ! Fit after self-cal, rms=0.061334Jy sigma=0.931649 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000156211 Jy ! Component: 100 - total flux cleaned = -0.000182196 Jy ! Component: 150 - total flux cleaned = -0.000217143 Jy ! Component: 200 - total flux cleaned = -0.000237944 Jy ! Total flux subtracted in 200 components = -0.000237944 Jy ! Clean residual min=-0.001977 max=0.002231 Jy/beam ! Clean residual mean=-0.000001 rms=0.000586 Jy/beam ! Combined flux in latest and established models = 0.0710183 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 104 components and 0.0710183 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061333Jy sigma=0.931647 ! Fit after self-cal, rms=0.061334Jy sigma=0.931635 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.733 mas, bmaj=8.953 mas, bpa=-4.73 degrees ! Estimated noise=0.65954 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.733 x 8.953 at -4.73 degrees (North through East) ! Clean map min=-0.0030531 max=0.062218 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.119 mas, bmaj=7.814 mas, bpa=-3.184 degrees ! Estimated noise=1.00054 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0490415 Jy ! Component: 100 - total flux cleaned = 0.0607995 Jy ! Component: 150 - total flux cleaned = 0.0650193 Jy ! Component: 200 - total flux cleaned = 0.0673209 Jy ! Total flux subtracted in 200 components = 0.0673209 Jy ! Clean residual min=-0.003653 max=0.003660 Jy/beam ! Clean residual mean=-0.000001 rms=0.000882 Jy/beam ! Combined flux in latest and established models = 0.0673209 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.0673209 Jy ! Inverting map and beam ! Estimated beam: bmin=3.733 mas, bmaj=8.953 mas, bpa=-4.73 degrees ! Estimated noise=0.65954 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00192623 Jy ! Component: 100 - total flux cleaned = 0.00259722 Jy ! Component: 150 - total flux cleaned = 0.00287624 Jy ! Component: 200 - total flux cleaned = 0.00312046 Jy ! Total flux subtracted in 200 components = 0.00312046 Jy ! Clean residual min=-0.002435 max=0.002163 Jy/beam ! Clean residual mean=-0.000001 rms=0.000565 Jy/beam ! Combined flux in latest and established models = 0.0704414 Jy ! Adding 25 model components to the UV plane model. ! The established model now contains 46 components and 0.0704414 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.548 mas, bmaj=12.63 mas, bpa=-2.21 degrees ! Estimated noise=0.774986 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000246615 Jy ! Component: 100 - total flux cleaned = 0.000277722 Jy ! Component: 150 - total flux cleaned = 0.000309739 Jy ! Component: 200 - total flux cleaned = 0.000366019 Jy ! Total flux subtracted in 200 components = 0.000366019 Jy ! Clean residual min=-0.002102 max=0.002299 Jy/beam ! Clean residual mean=-0.000001 rms=0.000598 Jy/beam ! Combined flux in latest and established models = 0.0708074 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.33624e-07 Jy ! Component: 100 - total flux cleaned = 2.34054e-05 Jy ! Component: 150 - total flux cleaned = 4.61056e-05 Jy ! Component: 200 - total flux cleaned = 4.64543e-05 Jy ! Total flux subtracted in 200 components = 4.64543e-05 Jy ! Clean residual min=-0.002065 max=0.002296 Jy/beam ! Clean residual mean=-0.000001 rms=0.000593 Jy/beam ! Combined flux in latest and established models = 0.0708538 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 70 components and 0.0708538 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.733 mas, bmaj=8.953 mas, bpa=-4.73 degrees ! Estimated noise=0.65954 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000295494 Jy ! Component: 100 - total flux cleaned = -0.000294392 Jy ! Component: 150 - total flux cleaned = -0.000356355 Jy ! Component: 200 - total flux cleaned = -0.00038436 Jy ! Total flux subtracted in 200 components = -0.00038436 Jy ! Clean residual min=-0.002307 max=0.002098 Jy/beam ! Clean residual mean=-0.000001 rms=0.000522 Jy/beam ! Combined flux in latest and established models = 0.0704695 Jy selfcal ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 86 components and 0.0704695 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.061383Jy sigma=0.931945 ! Fit after self-cal, rms=0.061355Jy sigma=0.931845 wmodel J0110-0219_S_map.mod ! Writing 86 model components to file: J0110-0219_S_map.mod wobs J0110-0219_S_uvs.fits ! Writing UV FITS file: J0110-0219_S_uvs.fits wwins J0110-0219_S_map.win ! wwins: Wrote 2 windows to J0110-0219_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 3.09727e-05 Jy ! Component: 100 - total flux cleaned = 0.000215409 Jy ! Component: 150 - total flux cleaned = 0.00024915 Jy ! Component: 200 - total flux cleaned = 0.00021524 Jy ! Component: 250 - total flux cleaned = 0.000154704 Jy ! Component: 300 - total flux cleaned = 6.82507e-05 Jy ! Component: 350 - total flux cleaned = -0.000127409 Jy ! Component: 400 - total flux cleaned = -0.000263006 Jy ! Component: 450 - total flux cleaned = -0.000447634 Jy ! Component: 500 - total flux cleaned = -0.000524803 Jy ! Component: 550 - total flux cleaned = -0.000550203 Jy ! Component: 600 - total flux cleaned = -0.00067273 Jy ! Component: 650 - total flux cleaned = -0.000696411 Jy ! Component: 700 - total flux cleaned = -0.000767236 Jy ! Component: 750 - total flux cleaned = -0.000859431 Jy ! Component: 800 - total flux cleaned = -0.000904618 Jy ! Component: 850 - total flux cleaned = -0.000971243 Jy ! Component: 900 - total flux cleaned = -0.000971159 Jy ! Component: 950 - total flux cleaned = -0.00103553 Jy ! Component: 1000 - total flux cleaned = -0.00109827 Jy ! Component: 1050 - total flux cleaned = -0.00115961 Jy ! Component: 1100 - total flux cleaned = -0.00113927 Jy ! Component: 1150 - total flux cleaned = -0.00123929 Jy ! Component: 1200 - total flux cleaned = -0.0012788 Jy ! Component: 1250 - total flux cleaned = -0.00133675 Jy ! Component: 1300 - total flux cleaned = -0.00135566 Jy ! Component: 1350 - total flux cleaned = -0.0013556 Jy ! Component: 1400 - total flux cleaned = -0.00144853 Jy ! Component: 1450 - total flux cleaned = -0.00146679 Jy ! Component: 1500 - total flux cleaned = -0.00146658 Jy ! Component: 1550 - total flux cleaned = -0.00144888 Jy ! Component: 1600 - total flux cleaned = -0.00146656 Jy ! Component: 1650 - total flux cleaned = -0.00144925 Jy ! Component: 1700 - total flux cleaned = -0.00139777 Jy ! Component: 1750 - total flux cleaned = -0.00138101 Jy ! Component: 1800 - total flux cleaned = -0.00136445 Jy ! Component: 1850 - total flux cleaned = -0.00133141 Jy ! Component: 1900 - total flux cleaned = -0.00129861 Jy ! Component: 1950 - total flux cleaned = -0.0012177 Jy ! Component: 2000 - total flux cleaned = -0.00112164 Jy ! Component: 2050 - total flux cleaned = -0.00112188 Jy ! Component: 2100 - total flux cleaned = -0.00104334 Jy ! Component: 2150 - total flux cleaned = -0.00101229 Jy ! Component: 2200 - total flux cleaned = -0.000966232 Jy ! Component: 2250 - total flux cleaned = -0.000950919 Jy ! Component: 2300 - total flux cleaned = -0.000905395 Jy ! Component: 2350 - total flux cleaned = -0.000845798 Jy ! Component: 2400 - total flux cleaned = -0.000786489 Jy ! Component: 2450 - total flux cleaned = -0.000757074 Jy ! Component: 2500 - total flux cleaned = -0.000727934 Jy ! Component: 2550 - total flux cleaned = -0.000656063 Jy ! Component: 2600 - total flux cleaned = -0.000613258 Jy ! Component: 2650 - total flux cleaned = -0.000599012 Jy ! Component: 2700 - total flux cleaned = -0.000514921 Jy ! Component: 2750 - total flux cleaned = -0.000473275 Jy ! Component: 2800 - total flux cleaned = -0.000459469 Jy ! Component: 2850 - total flux cleaned = -0.000459415 Jy ! Component: 2900 - total flux cleaned = -0.000432146 Jy ! Component: 2950 - total flux cleaned = -0.000418693 Jy ! Component: 3000 - total flux cleaned = -0.000405338 Jy ! Component: 3050 - total flux cleaned = -0.000378687 Jy ! Component: 3100 - total flux cleaned = -0.000365711 Jy ! Component: 3150 - total flux cleaned = -0.000444139 Jy ! Component: 3200 - total flux cleaned = -0.000431026 Jy ! Component: 3250 - total flux cleaned = -0.000431003 Jy ! Component: 3300 - total flux cleaned = -0.000456433 Jy ! Component: 3350 - total flux cleaned = -0.000469173 Jy ! Component: 3400 - total flux cleaned = -0.00049453 Jy ! Component: 3450 - total flux cleaned = -0.000532295 Jy ! Component: 3500 - total flux cleaned = -0.000619456 Jy ! Component: 3550 - total flux cleaned = -0.000656584 Jy ! Component: 3600 - total flux cleaned = -0.000693543 Jy ! Component: 3650 - total flux cleaned = -0.000754714 Jy ! Component: 3700 - total flux cleaned = -0.000815421 Jy ! Component: 3750 - total flux cleaned = -0.000791321 Jy ! Component: 3800 - total flux cleaned = -0.000899398 Jy ! Component: 3850 - total flux cleaned = -0.000899272 Jy ! Component: 3900 - total flux cleaned = -0.000958485 Jy ! Component: 3950 - total flux cleaned = -0.00100553 Jy ! Component: 4000 - total flux cleaned = -0.001029 Jy ! Component: 4050 - total flux cleaned = -0.00108739 Jy ! Total flux subtracted in 4096 components = -0.00111056 Jy ! Clean residual min=-0.000785 max=0.000672 Jy/beam ! Clean residual mean=-0.000000 rms=0.000211 Jy/beam ! Combined flux in latest and established models = 0.0693589 Jy keep ! Adding 289 model components to the UV plane model. ! The established model now contains 375 components and 0.0693589 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv124_uvs/J0110-0219_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.733 x 8.953 at -4.73 degrees (North through East) ! Clean map min=-0.0029652 max=0.062282 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv124_uvs/J0110-0219_S_map.fits wmodel /scr/pima/rv124_uvs/J0110-0219_S_map.mod ! Writing 375 model components to file: /scr/pima/rv124_uvs/J0110-0219_S_map.mod wobs /scr/pima/rv124_uvs/J0110-0219_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv124_uvs/J0110-0219_S_uvs.fits wwins /scr/pima/rv124_uvs/J0110-0219_S_map.win ! wwins: Wrote 3 windows to /scr/pima/rv124_uvs/J0110-0219_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.0622818 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000207906 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -1.00144 1.00144 2.00289 4.00577 8.01155 16.0231 32.0462 64.0924 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0006 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.062 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 299.567 quit ! Quitting program ! Log file /scr/pima/rv124_uvs/J0110-0219_S_dfm.log closed on Mon Dec 24 01:38:36 2018