! Started logfile: /scr/pima/rv123_uvs/J2230+6946_S_dfm.log on Sun Dec 23 05:06:43 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv123_uvs/J2230+6946_S_uva.fits ! Reading UV FITS file: /scr/pima/rv123_uvs/J2230+6946_S_uva.fits ! AN table 1: 23 integrations on 66 of 66 possible baselines. ! AN table 2: 3 integrations on 6 of 6 possible baselines. ! AN table 3: 3 integrations on 10 of 10 possible baselines. ! AN table 4: 6 integrations on 15 of 15 possible baselines. ! AN table 5: 9 integrations on 36 of 36 possible baselines. ! AN table 6: 4 integrations on 10 of 10 possible baselines. ! AN table 7: 14 integrations on 15 of 15 possible baselines. ! AN table 8: 38 integrations on 55 of 55 possible baselines. ! AN table 9: 4 integrations on 3 of 3 possible baselines. ! Apparent sampling: 0.394968 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2230+6946 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 89 lines of history. ! ! Reading 6844 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2230+6946_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 146 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 47 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 42 telescope corrections were flagged in sub-array 7. ! A total of 310 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 2. ! A total of 146 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 47 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 42 telescope corrections were flagged in sub-array 7. ! A total of 310 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 3. ! A total of 270 telescope corrections were flagged in sub-array 1. ! A total of 12 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 36 telescope corrections were flagged in sub-array 4. ! A total of 81 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 6. ! A total of 48 telescope corrections were flagged in sub-array 7. ! A total of 418 telescope corrections were flagged in sub-array 8. ! A total of 12 telescope corrections were flagged in sub-array 9. ! ! Correcting IF 4. ! A total of 146 telescope corrections were flagged in sub-array 1. ! A total of 6 telescope corrections were flagged in sub-array 2. ! A total of 7 telescope corrections were flagged in sub-array 3. ! A total of 26 telescope corrections were flagged in sub-array 4. ! A total of 47 telescope corrections were flagged in sub-array 5. ! A total of 12 telescope corrections were flagged in sub-array 6. ! A total of 42 telescope corrections were flagged in sub-array 7. ! A total of 310 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! ! Fit before self-cal, rms=1.242201Jy sigma=17.517010 ! Fit after self-cal, rms=0.372132Jy sigma=5.117429 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.811 mas, bmaj=2.901 mas, bpa=80.42 degrees ! Estimated noise=1.2163 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.517189 Jy ! Component: 100 - total flux cleaned = 0.641175 Jy ! Total flux subtracted in 100 components = 0.641175 Jy ! Clean residual min=-0.027919 max=0.051694 Jy/beam ! Clean residual mean=-0.000024 rms=0.006063 Jy/beam ! Combined flux in latest and established models = 0.641176 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 13 components and 0.641176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.229191Jy sigma=3.017818 ! Fit after self-cal, rms=0.228921Jy sigma=3.015584 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.05917 Jy ! Component: 100 - total flux cleaned = 0.0939382 Jy ! Total flux subtracted in 100 components = 0.0939382 Jy ! Clean residual min=-0.027803 max=0.022090 Jy/beam ! Clean residual mean=-0.000011 rms=0.005471 Jy/beam ! Combined flux in latest and established models = 0.735114 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 30 components and 0.735114 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.206610Jy sigma=2.667754 ! Fit after self-cal, rms=0.206536Jy sigma=2.667661 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.364 mas, bmaj=3.487 mas, bpa=79.02 degrees ! Estimated noise=0.958823 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0333784 Jy ! Component: 100 - total flux cleaned = 0.0503962 Jy ! Component: 150 - total flux cleaned = 0.060018 Jy ! Component: 200 - total flux cleaned = 0.0655391 Jy ! Total flux subtracted in 200 components = 0.0655391 Jy ! Clean residual min=-0.023546 max=0.019797 Jy/beam ! Clean residual mean=0.000010 rms=0.004909 Jy/beam ! Combined flux in latest and established models = 0.800653 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 45 components and 0.800653 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.201548Jy sigma=2.579282 ! Fit after self-cal, rms=0.201504Jy sigma=2.579093 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.364 x 3.487 at 79.02 degrees (North through East) ! Clean map min=-0.022045 max=0.67411 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.15 FD 1.07 HN 1.14 KP 0.93 ! LA 0.93 MK 0.98 NL 1.07 NY 1.28 ! ON 0.77 OV 0.95 PT 1.08 WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* WN 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MC 1.08 NY 1.37 ON 0.90 WN 1.00* ! WZ 0.84 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 KP 0.93 NY 1.53 OV 0.88 ! WN 1.00* WZ 0.80 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.14 FD 1.09 HN 0.88 KP 0.97 ! LA 0.91 MC 0.83 NL 1.08 OV 0.94 ! SC 0.84 ! ! Telescope amplitude corrections in sub-array 6: ! HN 0.82 MC 0.99 ON 0.82 SC 0.92 ! WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.09 MK 0.95 NY 1.55 ON 0.81 ! WN 1.00* WZ 0.83 ! ! A total of 30 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.13 FD 1.01 HN 0.87 KP 0.94 ! LA 0.92 MK 0.94 NL 1.09 NY 1.33 ! OV 0.94 SC 0.90 WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! NL 0.00* SC 0.00* WZ 0.00* ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.14 FD 1.09 HN 1.12 KP 0.95 ! LA 0.93 MK 0.97 NL 1.06 NY 1.16 ! ON 0.90 OV 0.77 PT 1.08 WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* WN 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MC 0.92 NY 1.30 ON 0.85 WN 1.00* ! WZ 0.88 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.11 KP 0.91 NY 1.21 OV 0.60 ! WN 1.00* WZ 0.83 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.13 FD 1.08 HN 0.85 KP 1.04 ! LA 0.93 MC 0.79 NL 1.08 OV 0.67 ! SC 1.01 ! ! Telescope amplitude corrections in sub-array 6: ! HN 0.84 MC 0.74 ON 0.96 SC 1.02 ! WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.04 MK 0.91 NY 1.36 ON 0.95 ! WN 1.00* WZ 0.77 ! ! A total of 30 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.11 FD 1.08 HN 0.87 KP 0.93 ! LA 0.94 MK 0.97 NL 1.08 NY 1.19 ! OV 0.74 SC 0.90 WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! NL 0.00* SC 0.00* WZ 0.00* ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* NY 0.00* ! ON 0.00* OV 0.00* PT 0.00* WN 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* WN 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MC 1.20 NY 1.13 ON 0.72 WN 1.00* ! WZ 0.90 ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* KP 0.00* NY 0.00* OV 0.00* ! WN 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MC 0.00* NL 0.00* OV 0.00* ! SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! HN 0.00* MC 0.00* ON 0.00* SC 0.00* ! WN 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* MK 3.70 NY 1.32 ON 0.75 ! WN 1.00* WZ 0.89 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* NY 0.00* ! OV 0.00* SC 0.00* WN 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! NL 0.00* SC 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 FD 1.07 HN 1.10 KP 0.94 ! LA 0.92 MK 0.97 NL 1.10 NY 1.26 ! ON 0.70 OV 0.93 PT 1.09 WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HN 0.00* NL 0.00* WN 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! MC 1.11 NY 1.53 ON 0.81 WN 1.00* ! WZ 0.84 ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.15 KP 1.01 NY 1.42 OV 0.91 ! WN 1.00* WZ 0.75 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.12 FD 1.09 HN 0.87 KP 1.02 ! LA 0.93 MC 1.29 NL 1.12 OV 0.90 ! SC 0.87 ! ! Telescope amplitude corrections in sub-array 6: ! HN 0.91 MC 0.96 ON 0.78 SC 0.94 ! WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.04 MK 0.92 NY 1.47 ON 0.82 ! WN 1.00* WZ 0.83 ! ! A total of 30 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.12 FD 1.05 HN 0.90 KP 0.95 ! LA 0.91 MK 0.98 NL 1.12 NY 1.25 ! OV 0.91 SC 0.88 WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! NL 0.00* SC 0.00* WZ 0.00* ! ! ! Fit before self-cal, rms=0.201504Jy sigma=2.579093 ! Fit after self-cal, rms=0.148427Jy sigma=1.847313 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.365 mas, bmaj=3.608 mas, bpa=79.85 degrees ! Estimated noise=0.976548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00993108 Jy ! Component: 100 - total flux cleaned = -0.0116715 Jy ! Component: 150 - total flux cleaned = -0.0122757 Jy ! Component: 200 - total flux cleaned = -0.0127922 Jy ! Total flux subtracted in 200 components = -0.0127922 Jy ! Clean residual min=-0.012625 max=0.014185 Jy/beam ! Clean residual mean=-0.000025 rms=0.003111 Jy/beam ! Combined flux in latest and established models = 0.787861 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 48 components and 0.787861 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147567Jy sigma=1.834200 ! Fit after self-cal, rms=0.147632Jy sigma=1.833214 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147632Jy sigma=1.833214 ! Fit after self-cal, rms=1.170253Jy sigma=1.500690 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.389 mas, bmaj=3.642 mas, bpa=86.23 degrees ! Estimated noise=0.993658 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00267964 Jy ! Component: 100 - total flux cleaned = 0.00110438 Jy ! Component: 150 - total flux cleaned = 0.000443744 Jy ! Component: 200 - total flux cleaned = 0.00015946 Jy ! Total flux subtracted in 200 components = 0.00015946 Jy ! Clean residual min=-0.009907 max=0.011777 Jy/beam ! Clean residual mean=-0.000002 rms=0.002288 Jy/beam ! Combined flux in latest and established models = 0.78802 Jy selfcal ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 53 components and 0.78802 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.167623Jy sigma=1.497279 ! Fit after self-cal, rms=1.167829Jy sigma=1.496483 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (11.5, 13). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011765 Jy ! Component: 100 - total flux cleaned = 0.0126626 Jy ! Component: 150 - total flux cleaned = 0.0124019 Jy ! Component: 200 - total flux cleaned = 0.0121538 Jy ! Total flux subtracted in 200 components = 0.0121538 Jy ! Clean residual min=-0.009800 max=0.011023 Jy/beam ! Clean residual mean=0.000011 rms=0.002252 Jy/beam ! Combined flux in latest and established models = 0.800174 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 66 components and 0.800174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.166262Jy sigma=1.490709 ! Fit after self-cal, rms=1.166245Jy sigma=1.489372 ! Inverting map ! Added new window around map position (21, 14). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00775891 Jy ! Component: 100 - total flux cleaned = 0.00837335 Jy ! Component: 150 - total flux cleaned = 0.00836885 Jy ! Component: 200 - total flux cleaned = 0.00809363 Jy ! Total flux subtracted in 200 components = 0.00809363 Jy ! Clean residual min=-0.009477 max=0.010380 Jy/beam ! Clean residual mean=0.000015 rms=0.002221 Jy/beam ! Combined flux in latest and established models = 0.808268 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 85 components and 0.808268 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.164471Jy sigma=1.485351 ! Fit after self-cal, rms=1.164483Jy sigma=1.484318 ! Inverting map ! Added new window around map position (-23, -22). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00404784 Jy ! Component: 100 - total flux cleaned = 0.00404898 Jy ! Component: 150 - total flux cleaned = 0.00348476 Jy ! Component: 200 - total flux cleaned = 0.00320892 Jy ! Total flux subtracted in 200 components = 0.00320892 Jy ! Clean residual min=-0.009964 max=0.009915 Jy/beam ! Clean residual mean=0.000017 rms=0.002210 Jy/beam ! Combined flux in latest and established models = 0.811477 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 106 components and 0.811477 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.162865Jy sigma=1.482297 ! Fit after self-cal, rms=1.162868Jy sigma=1.481800 ! Inverting map ! Added new window around map position (2.5, 116.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00395847 Jy ! Component: 100 - total flux cleaned = 0.00339087 Jy ! Component: 150 - total flux cleaned = 0.00256931 Jy ! Component: 200 - total flux cleaned = 0.00204124 Jy ! Total flux subtracted in 200 components = 0.00204124 Jy ! Clean residual min=-0.010348 max=0.008751 Jy/beam ! Clean residual mean=0.000019 rms=0.002206 Jy/beam ! Combined flux in latest and established models = 0.813518 Jy ! Performing phase self-cal ! Adding 48 model components to the UV plane model. ! The established model now contains 124 components and 0.813518 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.161174Jy sigma=1.480742 ! Fit after self-cal, rms=1.161161Jy sigma=1.480051 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=1.161161Jy sigma=1.480051 ! Fit after self-cal, rms=0.333868Jy sigma=0.883793 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.403 mas, bmaj=3.655 mas, bpa=82.34 degrees ! Estimated noise=0.990481 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00141881 Jy ! Component: 100 - total flux cleaned = -0.00248678 Jy ! Component: 150 - total flux cleaned = -0.00295505 Jy ! Component: 200 - total flux cleaned = -0.00285276 Jy ! Total flux subtracted in 200 components = -0.00285276 Jy ! Clean residual min=-0.003705 max=0.003672 Jy/beam ! Clean residual mean=0.000009 rms=0.000929 Jy/beam ! Combined flux in latest and established models = 0.810665 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 141 components and 0.810665 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333776Jy sigma=0.877234 ! Fit after self-cal, rms=0.333775Jy sigma=0.876489 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000315177 Jy ! Component: 100 - total flux cleaned = 0.000316587 Jy ! Component: 150 - total flux cleaned = 0.000317601 Jy ! Component: 200 - total flux cleaned = 0.000318439 Jy ! Total flux subtracted in 200 components = 0.000318439 Jy ! Clean residual min=-0.003683 max=0.003609 Jy/beam ! Clean residual mean=0.000009 rms=0.000917 Jy/beam ! Combined flux in latest and established models = 0.810983 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 154 components and 0.810983 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333709Jy sigma=0.873573 ! Fit after self-cal, rms=0.333695Jy sigma=0.873522 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.333695Jy sigma=0.873522 ! Fit after self-cal, rms=0.336093Jy sigma=0.872075 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.277 mas, bmaj=9.755 mas, bpa=58.92 degrees ! Estimated noise=1.2594 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00149581 Jy ! Component: 100 - total flux cleaned = -0.00131174 Jy ! Component: 150 - total flux cleaned = -0.00131604 Jy ! Component: 200 - total flux cleaned = -0.00131603 Jy ! Total flux subtracted in 200 components = -0.00131603 Jy ! Clean residual min=-0.003785 max=0.004003 Jy/beam ! Clean residual mean=0.000018 rms=0.001118 Jy/beam ! Combined flux in latest and established models = 0.809667 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 178 components and 0.809667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.336092Jy sigma=0.870320 ! Fit after self-cal, rms=0.336079Jy sigma=0.870014 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000155138 Jy ! Component: 100 - total flux cleaned = 0.000258657 Jy ! Component: 150 - total flux cleaned = 0.000209219 Jy ! Component: 200 - total flux cleaned = 0.000297411 Jy ! Total flux subtracted in 200 components = 0.000297411 Jy ! Clean residual min=-0.003830 max=0.004000 Jy/beam ! Clean residual mean=0.000018 rms=0.001109 Jy/beam ! Combined flux in latest and established models = 0.809965 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 195 components and 0.809965 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.336083Jy sigma=0.869417 ! Fit after self-cal, rms=0.336069Jy sigma=0.869377 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.407 mas, bmaj=3.662 mas, bpa=82.83 degrees ! Estimated noise=0.989726 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.407 x 3.662 at 82.83 degrees (North through East) ! Clean map min=-0.0049198 max=0.69176 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.336069Jy sigma=0.869377 ! Fit after self-cal, rms=0.358448Jy sigma=0.802246 ! Inverting map and beam ! Estimated beam: bmin=3.406 mas, bmaj=3.668 mas, bpa=83.1 degrees ! Estimated noise=0.987208 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00277878 Jy ! Component: 100 - total flux cleaned = -0.00321301 Jy ! Component: 150 - total flux cleaned = -0.00345365 Jy ! Component: 200 - total flux cleaned = -0.00353009 Jy ! Total flux subtracted in 200 components = -0.00353009 Jy ! Clean residual min=-0.003573 max=0.003450 Jy/beam ! Clean residual mean=0.000010 rms=0.000860 Jy/beam ! Combined flux in latest and established models = 0.806435 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 198 components and 0.806435 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358370Jy sigma=0.799232 ! Fit after self-cal, rms=0.358364Jy sigma=0.799191 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000161633 Jy ! Component: 100 - total flux cleaned = -0.000232229 Jy ! Component: 150 - total flux cleaned = -0.000232292 Jy ! Component: 200 - total flux cleaned = -0.000231227 Jy ! Total flux subtracted in 200 components = -0.000231227 Jy ! Clean residual min=-0.003557 max=0.003380 Jy/beam ! Clean residual mean=0.000009 rms=0.000853 Jy/beam ! Combined flux in latest and established models = 0.806203 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 209 components and 0.806203 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358323Jy sigma=0.797439 ! Fit after self-cal, rms=0.358314Jy sigma=0.797414 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358314Jy sigma=0.797414 ! Fit after self-cal, rms=0.358735Jy sigma=0.796771 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.848 mas, bmaj=2.989 mas, bpa=-84.64 degrees ! Estimated noise=1.26892 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.535667 Jy ! Component: 100 - total flux cleaned = 0.660135 Jy ! Component: 150 - total flux cleaned = 0.707361 Jy ! Component: 200 - total flux cleaned = 0.73197 Jy ! Total flux subtracted in 200 components = 0.73197 Jy ! Clean residual min=-0.006252 max=0.012110 Jy/beam ! Clean residual mean=-0.000012 rms=0.001430 Jy/beam ! Combined flux in latest and established models = 0.73197 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 19 model components to the UV plane model. ! The established model now contains 19 components and 0.73197 Jy ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=3.674 mas, bpa=83.22 degrees ! Estimated noise=0.986704 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0194604 Jy ! Component: 100 - total flux cleaned = 0.031507 Jy ! Component: 150 - total flux cleaned = 0.0402275 Jy ! Component: 200 - total flux cleaned = 0.0469077 Jy ! Total flux subtracted in 200 components = 0.0469077 Jy ! Clean residual min=-0.004077 max=0.005134 Jy/beam ! Clean residual mean=-0.000015 rms=0.000982 Jy/beam ! Combined flux in latest and established models = 0.778877 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 59 components and 0.778877 Jy ! Inverting map ! Added new window around map position (1, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00586911 Jy ! Component: 100 - total flux cleaned = 0.0104466 Jy ! Component: 150 - total flux cleaned = 0.0142738 Jy ! Component: 200 - total flux cleaned = 0.0169026 Jy ! Total flux subtracted in 200 components = 0.0169026 Jy ! Clean residual min=-0.003658 max=0.003933 Jy/beam ! Clean residual mean=0.000000 rms=0.000890 Jy/beam ! Combined flux in latest and established models = 0.79578 Jy ! Adding 36 model components to the UV plane model. ! The established model now contains 84 components and 0.79578 Jy ! Inverting map ! Added new window around map position (-24, -5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00335246 Jy ! Component: 100 - total flux cleaned = 0.00538528 Jy ! Component: 150 - total flux cleaned = 0.00644967 Jy ! Component: 200 - total flux cleaned = 0.00725963 Jy ! Total flux subtracted in 200 components = 0.00725963 Jy ! Clean residual min=-0.003645 max=0.003486 Jy/beam ! Clean residual mean=0.000006 rms=0.000864 Jy/beam ! Combined flux in latest and established models = 0.80304 Jy ! Adding 38 model components to the UV plane model. ! The established model now contains 99 components and 0.80304 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.285 mas, bmaj=9.77 mas, bpa=58.98 degrees ! Estimated noise=1.25125 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00273018 Jy ! Component: 100 - total flux cleaned = 0.00317768 Jy ! Component: 150 - total flux cleaned = 0.0035773 Jy ! Component: 200 - total flux cleaned = 0.00405143 Jy ! Total flux subtracted in 200 components = 0.00405143 Jy ! Clean residual min=-0.003680 max=0.003873 Jy/beam ! Clean residual mean=0.000021 rms=0.001064 Jy/beam ! Combined flux in latest and established models = 0.807092 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000209685 Jy ! Component: 100 - total flux cleaned = 0.000249322 Jy ! Component: 150 - total flux cleaned = 0.000249312 Jy ! Component: 200 - total flux cleaned = 0.000248837 Jy ! Total flux subtracted in 200 components = 0.000248837 Jy ! Clean residual min=-0.003658 max=0.003855 Jy/beam ! Clean residual mean=0.000021 rms=0.001057 Jy/beam ! Combined flux in latest and established models = 0.80734 Jy ! Adding 34 model components to the UV plane model. ! The established model now contains 127 components and 0.80734 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.41 mas, bmaj=3.674 mas, bpa=83.22 degrees ! Estimated noise=0.986704 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 3.82232e-06 Jy ! Component: 100 - total flux cleaned = -7.43365e-05 Jy ! Component: 150 - total flux cleaned = -7.42275e-05 Jy ! Component: 200 - total flux cleaned = -7.49396e-05 Jy ! Total flux subtracted in 200 components = -7.49396e-05 Jy ! Clean residual min=-0.003653 max=0.003400 Jy/beam ! Clean residual mean=0.000010 rms=0.000841 Jy/beam ! Combined flux in latest and established models = 0.807265 Jy selfcal ! Performing phase self-cal ! Adding 24 model components to the UV plane model. ! The established model now contains 139 components and 0.807265 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.358399Jy sigma=0.794477 ! Fit after self-cal, rms=0.358299Jy sigma=0.792918 wmodel J2230+6946_S_map.mod ! Writing 139 model components to file: J2230+6946_S_map.mod wobs J2230+6946_S_uvs.fits ! Writing UV FITS file: J2230+6946_S_uvs.fits wwins J2230+6946_S_map.win ! wwins: Wrote 7 windows to J2230+6946_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000149363 Jy ! Component: 100 - total flux cleaned = -0.000211398 Jy ! Component: 150 - total flux cleaned = 2.11786e-05 Jy ! Component: 200 - total flux cleaned = 7.81445e-05 Jy ! Component: 250 - total flux cleaned = 7.81969e-05 Jy ! Component: 300 - total flux cleaned = 7.81447e-05 Jy ! Component: 350 - total flux cleaned = 7.83116e-05 Jy ! Component: 400 - total flux cleaned = 0.000132295 Jy ! Component: 450 - total flux cleaned = 0.000238455 Jy ! Component: 500 - total flux cleaned = 0.000343165 Jy ! Component: 550 - total flux cleaned = 0.000498607 Jy ! Component: 600 - total flux cleaned = 0.000549383 Jy ! Component: 650 - total flux cleaned = 0.000650514 Jy ! Component: 700 - total flux cleaned = 0.000700021 Jy ! Component: 750 - total flux cleaned = 0.000699655 Jy ! Component: 800 - total flux cleaned = 0.000847937 Jy ! Component: 850 - total flux cleaned = 0.001141 Jy ! Component: 900 - total flux cleaned = 0.00109202 Jy ! Component: 950 - total flux cleaned = 0.00118832 Jy ! Component: 1000 - total flux cleaned = 0.0013316 Jy ! Component: 1050 - total flux cleaned = 0.00137981 Jy ! Component: 1100 - total flux cleaned = 0.00161504 Jy ! Component: 1150 - total flux cleaned = 0.00166194 Jy ! Component: 1200 - total flux cleaned = 0.00175394 Jy ! Component: 1250 - total flux cleaned = 0.0017543 Jy ! Component: 1300 - total flux cleaned = 0.00198275 Jy ! Component: 1350 - total flux cleaned = 0.00198297 Jy ! Component: 1400 - total flux cleaned = 0.00202792 Jy ! Component: 1450 - total flux cleaned = 0.00184833 Jy ! Component: 1500 - total flux cleaned = 0.00207157 Jy ! Component: 1550 - total flux cleaned = 0.00198329 Jy ! Component: 1600 - total flux cleaned = 0.00207136 Jy ! Component: 1650 - total flux cleaned = 0.00220286 Jy ! Component: 1700 - total flux cleaned = 0.00207214 Jy ! Component: 1750 - total flux cleaned = 0.00215863 Jy ! Component: 1800 - total flux cleaned = 0.00224439 Jy ! Component: 1850 - total flux cleaned = 0.00198782 Jy ! Component: 1900 - total flux cleaned = 0.00228563 Jy ! Component: 1950 - total flux cleaned = 0.00228559 Jy ! Component: 2000 - total flux cleaned = 0.00220118 Jy ! Component: 2050 - total flux cleaned = 0.00203348 Jy ! Component: 2100 - total flux cleaned = 0.00228364 Jy ! Component: 2150 - total flux cleaned = 0.00203455 Jy ! Component: 2200 - total flux cleaned = 0.00224121 Jy ! Component: 2250 - total flux cleaned = 0.00236436 Jy ! Component: 2300 - total flux cleaned = 0.00248685 Jy ! Component: 2350 - total flux cleaned = 0.00236527 Jy ! Component: 2400 - total flux cleaned = 0.00264847 Jy ! Component: 2450 - total flux cleaned = 0.00272881 Jy ! Component: 2500 - total flux cleaned = 0.00260818 Jy ! Component: 2550 - total flux cleaned = 0.0026485 Jy ! Component: 2600 - total flux cleaned = 0.00300628 Jy ! Component: 2650 - total flux cleaned = 0.00300627 Jy ! Component: 2700 - total flux cleaned = 0.00296659 Jy ! Component: 2750 - total flux cleaned = 0.0028098 Jy ! Component: 2800 - total flux cleaned = 0.0030442 Jy ! Component: 2850 - total flux cleaned = 0.00316099 Jy ! Component: 2900 - total flux cleaned = 0.00304468 Jy ! Component: 2950 - total flux cleaned = 0.00308353 Jy ! Component: 3000 - total flux cleaned = 0.00316021 Jy ! Component: 3050 - total flux cleaned = 0.00316029 Jy ! Component: 3100 - total flux cleaned = 0.00319838 Jy ! Component: 3150 - total flux cleaned = 0.00308461 Jy ! Component: 3200 - total flux cleaned = 0.00319812 Jy ! Component: 3250 - total flux cleaned = 0.00316068 Jy ! Component: 3300 - total flux cleaned = 0.00342288 Jy ! Component: 3350 - total flux cleaned = 0.00346025 Jy ! Component: 3400 - total flux cleaned = 0.00323718 Jy ! Component: 3450 - total flux cleaned = 0.00334803 Jy ! Component: 3500 - total flux cleaned = 0.0035328 Jy ! Component: 3550 - total flux cleaned = 0.00349588 Jy ! Component: 3600 - total flux cleaned = 0.00353223 Jy ! Component: 3650 - total flux cleaned = 0.00375109 Jy ! Component: 3700 - total flux cleaned = 0.00371454 Jy ! Component: 3750 - total flux cleaned = 0.00371449 Jy ! Component: 3800 - total flux cleaned = 0.00371438 Jy ! Component: 3850 - total flux cleaned = 0.00375065 Jy ! Component: 3900 - total flux cleaned = 0.00360737 Jy ! Component: 3950 - total flux cleaned = 0.00371479 Jy ! Component: 4000 - total flux cleaned = 0.0036436 Jy ! Component: 4050 - total flux cleaned = 0.00374998 Jy ! Total flux subtracted in 4096 components = 0.00378561 Jy ! Clean residual min=-0.001990 max=0.002398 Jy/beam ! Clean residual mean=0.000002 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.811051 Jy keep ! Adding 332 model components to the UV plane model. ! The established model now contains 471 components and 0.811051 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv123_uvs/J2230+6946_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.41 x 3.674 at 83.22 degrees (North through East) ! Clean map min=-0.0028928 max=0.69466 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv123_uvs/J2230+6946_S_map.fits wmodel /scr/pima/rv123_uvs/J2230+6946_S_map.mod ! Writing 471 model components to file: /scr/pima/rv123_uvs/J2230+6946_S_map.mod wobs /scr/pima/rv123_uvs/J2230+6946_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv123_uvs/J2230+6946_S_uvs.fits wwins /scr/pima/rv123_uvs/J2230+6946_S_map.win ! wwins: Wrote 8 windows to /scr/pima/rv123_uvs/J2230+6946_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.69466 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000625906 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.270307 0.270307 0.540614 1.08123 2.16246 4.32492 8.64983 17.2997 34.5993 69.1986 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.694 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1109.85 quit ! Quitting program ! Log file /scr/pima/rv123_uvs/J2230+6946_S_dfm.log closed on Sun Dec 23 05:06:48 2018