! Started logfile: /scr/pima/rv123_uvs/J2212+2355_S_dfm.log on Sun Dec 23 05:06:33 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv123_uvs/J2212+2355_S_uva.fits ! Reading UV FITS file: /scr/pima/rv123_uvs/J2212+2355_S_uva.fits ! AN table 1: 13 integrations on 15 of 15 possible baselines. ! AN table 2: 11 integrations on 15 of 15 possible baselines. ! AN table 3: 47 integrations on 36 of 36 possible baselines. ! AN table 4: 4 integrations on 6 of 6 possible baselines. ! AN table 5: 3 integrations on 15 of 15 possible baselines. ! AN table 6: 15 integrations on 21 of 21 possible baselines. ! AN table 7: 3 integrations on 28 of 28 possible baselines. ! AN table 8: 11 integrations on 45 of 45 possible baselines. ! AN table 9: 2 integrations on 3 of 3 possible baselines. ! AN table 10: 13 integrations on 28 of 28 possible baselines. ! AN table 11: 30 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.507597 visibilities/baseline/integration-bin. ! Found source: J2212+2355 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 89 lines of history. ! ! Reading 8152 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2212+2355_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 19 telescope corrections were flagged in sub-array 2. ! A total of 216 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 53 telescope corrections were flagged in sub-array 6. ! A total of 10 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! A total of 52 telescope corrections were flagged in sub-array 10. ! A total of 160 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 2. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 19 telescope corrections were flagged in sub-array 2. ! A total of 216 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 53 telescope corrections were flagged in sub-array 6. ! A total of 10 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! A total of 52 telescope corrections were flagged in sub-array 10. ! A total of 160 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 3. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 19 telescope corrections were flagged in sub-array 2. ! A total of 258 telescope corrections were flagged in sub-array 3. ! A total of 16 telescope corrections were flagged in sub-array 4. ! A total of 18 telescope corrections were flagged in sub-array 5. ! A total of 73 telescope corrections were flagged in sub-array 6. ! A total of 24 telescope corrections were flagged in sub-array 7. ! A total of 110 telescope corrections were flagged in sub-array 8. ! A total of 6 telescope corrections were flagged in sub-array 9. ! A total of 104 telescope corrections were flagged in sub-array 10. ! A total of 210 telescope corrections were flagged in sub-array 11. ! ! Correcting IF 4. ! A total of 50 telescope corrections were flagged in sub-array 1. ! A total of 19 telescope corrections were flagged in sub-array 2. ! A total of 216 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 6 telescope corrections were flagged in sub-array 5. ! A total of 53 telescope corrections were flagged in sub-array 6. ! A total of 10 telescope corrections were flagged in sub-array 7. ! A total of 56 telescope corrections were flagged in sub-array 8. ! A total of 52 telescope corrections were flagged in sub-array 10. ! A total of 160 telescope corrections were flagged in sub-array 11. ! ! Fit before self-cal, rms=1.239878Jy sigma=14.783465 ! Fit after self-cal, rms=0.432189Jy sigma=4.986940 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.414 mas, bmaj=2.893 mas, bpa=-53.62 degrees ! Estimated noise=1.2281 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.49993 Jy ! Component: 100 - total flux cleaned = 0.660806 Jy ! Total flux subtracted in 100 components = 0.660806 Jy ! Clean residual min=-0.023935 max=0.071435 Jy/beam ! Clean residual mean=-0.000013 rms=0.006363 Jy/beam ! Combined flux in latest and established models = 0.660806 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.660806 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.273031Jy sigma=2.804854 ! Fit after self-cal, rms=0.272154Jy sigma=2.801245 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0734177 Jy ! Component: 100 - total flux cleaned = 0.1123 Jy ! Total flux subtracted in 100 components = 0.1123 Jy ! Clean residual min=-0.020858 max=0.043943 Jy/beam ! Clean residual mean=-0.000019 rms=0.005423 Jy/beam ! Combined flux in latest and established models = 0.773106 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 19 components and 0.773106 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.237697Jy sigma=2.402695 ! Fit after self-cal, rms=0.237448Jy sigma=2.401485 ! Inverting map ! Added new window around map position (0.5, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0368188 Jy ! Component: 100 - total flux cleaned = 0.0559921 Jy ! Total flux subtracted in 100 components = 0.0559921 Jy ! Clean residual min=-0.019622 max=0.034042 Jy/beam ! Clean residual mean=-0.000022 rms=0.005147 Jy/beam ! Combined flux in latest and established models = 0.829098 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 25 components and 0.829098 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.226098Jy sigma=2.288078 ! Fit after self-cal, rms=0.225272Jy sigma=2.280157 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.731 mas, bmaj=3.259 mas, bpa=-61.3 degrees ! Estimated noise=1.01528 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0410668 Jy ! Component: 100 - total flux cleaned = 0.066803 Jy ! Component: 150 - total flux cleaned = 0.0847329 Jy ! Component: 200 - total flux cleaned = 0.0977114 Jy ! Total flux subtracted in 200 components = 0.0977114 Jy ! Clean residual min=-0.024184 max=0.021445 Jy/beam ! Clean residual mean=-0.000044 rms=0.005111 Jy/beam ! Combined flux in latest and established models = 0.926809 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 50 components and 0.926809 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.212508Jy sigma=2.177518 ! Fit after self-cal, rms=0.212066Jy sigma=2.173104 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.731 x 3.259 at -61.3 degrees (North through East) ! Clean map min=-0.022106 max=0.61126 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.93 NY 1.35 ON 0.83 WN 1.00* ! WZ 1.04 YG 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 1.01 MC 1.17 NY 1.25 ON 0.87 ! WZ 1.02 YG 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 1.03 HN 0.88 MC 1.08 NL 1.65 ! NY 1.31 ON 0.83 SC 0.88 WN 1.00* ! WZ 0.95 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* LA 0.00* WN 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.12 FD 1.07 KP 0.97 NL 1.10 ! ON 0.89 OV 0.93 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.15 MK 1.05 NY 1.29 ON 0.87 ! OV 0.92 WN 1.00* WZ 0.98 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.04 FD 1.05 KP 0.92 LA 0.96 ! MK 1.02 OV 0.92 PT 1.06 WN 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.12 FD 1.07 HN 0.87 KP 0.94 ! LA 0.93 MK 0.96 NL 1.10 OV 0.94 ! PT 1.07 SC 0.88 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* HN 0.00* NY 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 1.17 FD 1.03 KP 0.94 LA 0.91 ! MK 0.91 NL 1.08 NY 1.15 OV 0.92 ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! BR 1.12 KP 0.98 LA 0.95 MK 0.83 ! OV 0.99 PT 1.09 YG 1.00* ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 1.09 NY 1.26 ON 1.04 WN 1.00* ! WZ 0.82 YG 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 1.04 MC 0.94 NY 1.19 ON 0.95 ! WZ 0.92 YG 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.95 HN 0.87 MC 0.98 NL 1.80 ! NY 1.20 ON 1.02 SC 0.88 WN 1.00* ! WZ 0.89 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* LA 0.00* WN 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.08 FD 1.10 KP 0.97 NL 1.14 ! ON 0.95 OV 0.75 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.18 MK 1.08 NY 1.14 ON 0.99 ! OV 0.72 WN 1.00* WZ 0.86 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.05 FD 1.07 KP 0.95 LA 0.89 ! MK 1.02 OV 0.71 PT 1.06 WN 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.83 FD 1.06 HN 0.89 KP 0.95 ! LA 0.92 MK 0.98 NL 1.08 OV 0.73 ! PT 1.06 SC 0.92 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* HN 0.00* NY 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 2.16 FD 1.06 KP 0.95 LA 0.91 ! MK 0.91 NL 1.11 NY 0.99 OV 0.73 ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! BR 1.16 KP 1.02 LA 0.93 MK 0.81 ! OV 1.13 PT 1.10 YG 1.00* ! ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.89 NY 1.16 ON 0.72 WN 1.00* ! WZ 0.98 YG 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 1.01 MC 1.23 NY 1.17 ON 0.68 ! WZ 0.92 YG 1.00* ! ! A total of 45 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.90 HN 1.00* MC 1.21 NL 1.00* ! NY 1.12 ON 0.74 SC 1.00* WN 1.00* ! WZ 0.87 ! ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* LA 0.00* WN 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* KP 0.00* NL 0.00* ! ON 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.00* MK 2.45 NY 1.17 ON 0.80 ! OV 1.00* WN 1.00* WZ 0.92 ! ! Telescope amplitude corrections in sub-array 7: ! BR 0.00* FD 0.00* KP 0.00* LA 0.00* ! MK 0.00* OV 0.00* PT 0.00* WN 0.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! PT 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* HN 0.00* NY 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! BR 0.00* FD 0.00* KP 0.00* LA 0.00* ! MK 0.00* NL 0.00* NY 0.00* OV 0.00* ! ! Telescope amplitude corrections in sub-array 11: ! BR 0.00* KP 0.00* LA 0.00* MK 0.00* ! OV 0.00* PT 0.00* YG 0.00* ! ! ! Correcting IF 4. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 1.00 NY 1.23 ON 0.84 WN 1.00* ! WZ 0.91 YG 1.00* ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! HH 0.86 MC 1.02 NY 1.35 ON 0.78 ! WZ 0.87 YG 1.00* ! ! A total of 15 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.86 HN 0.91 MC 1.22 NL 1.71 ! NY 1.26 ON 0.82 SC 0.85 WN 1.00* ! WZ 0.82 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! FD 0.00* HN 0.00* LA 0.00* WN 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.13 FD 1.10 KP 1.03 NL 1.16 ! ON 0.86 OV 0.91 ! ! Telescope amplitude corrections in sub-array 6: ! BR 1.11 MK 1.11 NY 1.25 ON 0.78 ! OV 0.90 WN 1.00* WZ 0.90 ! ! Telescope amplitude corrections in sub-array 7: ! BR 1.02 FD 1.05 KP 0.99 LA 0.94 ! MK 1.05 OV 0.91 PT 1.06 WN 1.00* ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.38 FD 1.10 HN 0.88 KP 0.98 ! LA 0.94 MK 1.00 NL 1.13 OV 0.91 ! PT 1.05 SC 0.90 ! ! A total of 6 telescope corrections were flagged in sub-array 9. ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* HN 0.00* NY 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 10. ! Telescope amplitude corrections in sub-array 10: ! BR 1.61 FD 1.04 KP 0.95 LA 0.92 ! MK 0.92 NL 1.10 NY 1.15 OV 0.90 ! ! A total of 6 telescope corrections were flagged in sub-array 11. ! Telescope amplitude corrections in sub-array 11: ! BR 1.12 KP 0.99 LA 0.96 MK 0.86 ! OV 0.97 PT 1.07 YG 1.00* ! ! ! Fit before self-cal, rms=0.212066Jy sigma=2.173104 ! Fit after self-cal, rms=0.186475Jy sigma=1.335163 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.713 mas, bmaj=3.182 mas, bpa=-65.08 degrees ! Estimated noise=1.0539 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00661717 Jy ! Component: 100 - total flux cleaned = -0.00584974 Jy ! Component: 150 - total flux cleaned = -0.00523864 Jy ! Component: 200 - total flux cleaned = -0.00523877 Jy ! Total flux subtracted in 200 components = -0.00523877 Jy ! Clean residual min=-0.009807 max=0.009624 Jy/beam ! Clean residual mean=-0.000003 rms=0.002113 Jy/beam ! Combined flux in latest and established models = 0.921571 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 58 components and 0.92157 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185182Jy sigma=1.309641 ! Fit after self-cal, rms=0.185147Jy sigma=1.307515 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.185147Jy sigma=1.307515 ! Fit after self-cal, rms=0.125203Jy sigma=0.992008 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.722 mas, bmaj=3.19 mas, bpa=-64.85 degrees ! Estimated noise=1.05313 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00761126 Jy ! Component: 100 - total flux cleaned = -0.00901397 Jy ! Component: 150 - total flux cleaned = -0.00966097 Jy ! Component: 200 - total flux cleaned = -0.0100674 Jy ! Total flux subtracted in 200 components = -0.0100674 Jy ! Clean residual min=-0.005612 max=0.005243 Jy/beam ! Clean residual mean=-0.000004 rms=0.001308 Jy/beam ! Combined flux in latest and established models = 0.911503 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 69 components and 0.911503 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124539Jy sigma=0.982944 ! Fit after self-cal, rms=0.124546Jy sigma=0.982442 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000597595 Jy ! Component: 100 - total flux cleaned = -0.000706275 Jy ! Component: 150 - total flux cleaned = -0.00100073 Jy ! Component: 200 - total flux cleaned = -0.00125646 Jy ! Total flux subtracted in 200 components = -0.00125646 Jy ! Clean residual min=-0.005560 max=0.005144 Jy/beam ! Clean residual mean=-0.000004 rms=0.001291 Jy/beam ! Combined flux in latest and established models = 0.910247 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 71 components and 0.910247 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124359Jy sigma=0.979955 ! Fit after self-cal, rms=0.124346Jy sigma=0.979662 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124346Jy sigma=0.979662 ! Fit after self-cal, rms=0.120740Jy sigma=0.914598 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.725 mas, bmaj=3.191 mas, bpa=-64.45 degrees ! Estimated noise=1.05366 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00470628 Jy ! Component: 100 - total flux cleaned = -0.00650342 Jy ! Component: 150 - total flux cleaned = -0.00735039 Jy ! Component: 200 - total flux cleaned = -0.00790077 Jy ! Total flux subtracted in 200 components = -0.00790077 Jy ! Clean residual min=-0.004656 max=0.004491 Jy/beam ! Clean residual mean=-0.000017 rms=0.001041 Jy/beam ! Combined flux in latest and established models = 0.902346 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 78 components and 0.902346 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120459Jy sigma=0.910598 ! Fit after self-cal, rms=0.120458Jy sigma=0.910368 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000504326 Jy ! Component: 100 - total flux cleaned = -0.000668921 Jy ! Component: 150 - total flux cleaned = -0.000889884 Jy ! Component: 200 - total flux cleaned = -0.00102234 Jy ! Total flux subtracted in 200 components = -0.00102234 Jy ! Clean residual min=-0.004593 max=0.004472 Jy/beam ! Clean residual mean=-0.000017 rms=0.001031 Jy/beam ! Combined flux in latest and established models = 0.901323 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 85 components and 0.901323 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120370Jy sigma=0.908838 ! Fit after self-cal, rms=0.120358Jy sigma=0.908747 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120358Jy sigma=0.908747 ! Fit after self-cal, rms=0.120195Jy sigma=0.906759 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.561 mas, bmaj=9.975 mas, bpa=-52.34 degrees ! Estimated noise=1.46486 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00588987 Jy ! Component: 100 - total flux cleaned = -0.00727582 Jy ! Component: 150 - total flux cleaned = -0.00777419 Jy ! Component: 200 - total flux cleaned = -0.00808554 Jy ! Total flux subtracted in 200 components = -0.00808554 Jy ! Clean residual min=-0.004895 max=0.005441 Jy/beam ! Clean residual mean=-0.000041 rms=0.001444 Jy/beam ! Combined flux in latest and established models = 0.893238 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 100 components and 0.893238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120176Jy sigma=0.906925 ! Fit after self-cal, rms=0.120140Jy sigma=0.906317 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000200385 Jy ! Component: 100 - total flux cleaned = -0.000531126 Jy ! Component: 150 - total flux cleaned = -0.000694446 Jy ! Component: 200 - total flux cleaned = -0.000793603 Jy ! Total flux subtracted in 200 components = -0.000793603 Jy ! Clean residual min=-0.004850 max=0.005337 Jy/beam ! Clean residual mean=-0.000041 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 0.892444 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 110 components and 0.892444 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120207Jy sigma=0.907312 ! Fit after self-cal, rms=0.120197Jy sigma=0.907179 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.73 mas, bmaj=3.193 mas, bpa=-64.35 degrees ! Estimated noise=1.0545 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.73 x 3.193 at -64.35 degrees (North through East) ! Clean map min=-0.0065141 max=0.62373 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120197Jy sigma=0.907179 ! Fit after self-cal, rms=0.109462Jy sigma=0.776437 ! Inverting map and beam ! Estimated beam: bmin=2.735 mas, bmaj=3.195 mas, bpa=-64.11 degrees ! Estimated noise=1.05455 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00323449 Jy ! Component: 100 - total flux cleaned = -0.00354121 Jy ! Component: 150 - total flux cleaned = -0.00389968 Jy ! Component: 200 - total flux cleaned = -0.0042176 Jy ! Total flux subtracted in 200 components = -0.0042176 Jy ! Clean residual min=-0.004126 max=0.003929 Jy/beam ! Clean residual mean=-0.000017 rms=0.000963 Jy/beam ! Combined flux in latest and established models = 0.888227 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 115 components and 0.888227 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109255Jy sigma=0.773390 ! Fit after self-cal, rms=0.109256Jy sigma=0.773275 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000251151 Jy ! Component: 100 - total flux cleaned = -0.000462708 Jy ! Component: 150 - total flux cleaned = -0.000592442 Jy ! Component: 200 - total flux cleaned = -0.000709868 Jy ! Total flux subtracted in 200 components = -0.000709868 Jy ! Clean residual min=-0.004117 max=0.003967 Jy/beam ! Clean residual mean=-0.000017 rms=0.000956 Jy/beam ! Combined flux in latest and established models = 0.887517 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 119 components and 0.887517 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109169Jy sigma=0.772066 ! Fit after self-cal, rms=0.109167Jy sigma=0.771989 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109167Jy sigma=0.771989 ! Fit after self-cal, rms=0.109002Jy sigma=0.770699 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.429 mas, bmaj=2.842 mas, bpa=-52.64 degrees ! Estimated noise=1.28178 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.514683 Jy ! Component: 100 - total flux cleaned = 0.679798 Jy ! Component: 150 - total flux cleaned = 0.752667 Jy ! Component: 200 - total flux cleaned = 0.790684 Jy ! Total flux subtracted in 200 components = 0.790684 Jy ! Clean residual min=-0.007132 max=0.019126 Jy/beam ! Clean residual mean=-0.000002 rms=0.001806 Jy/beam ! Combined flux in latest and established models = 0.790684 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.790684 Jy ! Inverting map and beam ! Estimated beam: bmin=2.736 mas, bmaj=3.198 mas, bpa=-64.28 degrees ! Estimated noise=1.05478 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0329019 Jy ! Component: 100 - total flux cleaned = 0.0524717 Jy ! Component: 150 - total flux cleaned = 0.0652512 Jy ! Component: 200 - total flux cleaned = 0.0738703 Jy ! Total flux subtracted in 200 components = 0.0738703 Jy ! Clean residual min=-0.005098 max=0.005717 Jy/beam ! Clean residual mean=-0.000010 rms=0.001068 Jy/beam ! Combined flux in latest and established models = 0.864554 Jy ! Adding 49 model components to the UV plane model. ! The established model now contains 64 components and 0.864554 Jy ! Inverting map ! Added new window around map position (6, 5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00637679 Jy ! Component: 100 - total flux cleaned = 0.0105075 Jy ! Component: 150 - total flux cleaned = 0.0120786 Jy ! Component: 200 - total flux cleaned = 0.0135438 Jy ! Total flux subtracted in 200 components = 0.0135438 Jy ! Clean residual min=-0.004314 max=0.004168 Jy/beam ! Clean residual mean=-0.000015 rms=0.000955 Jy/beam ! Combined flux in latest and established models = 0.878098 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 82 components and 0.878098 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.598 mas, bmaj=10.01 mas, bpa=-51.9 degrees ! Estimated noise=1.45523 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00319817 Jy ! Component: 100 - total flux cleaned = 0.00376292 Jy ! Component: 150 - total flux cleaned = 0.00391495 Jy ! Component: 200 - total flux cleaned = 0.00403746 Jy ! Total flux subtracted in 200 components = 0.00403746 Jy ! Clean residual min=-0.004601 max=0.005130 Jy/beam ! Clean residual mean=-0.000039 rms=0.001337 Jy/beam ! Combined flux in latest and established models = 0.882135 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 6.9272e-05 Jy ! Component: 100 - total flux cleaned = 0.000129707 Jy ! Component: 150 - total flux cleaned = 0.00020583 Jy ! Component: 200 - total flux cleaned = 0.000228254 Jy ! Total flux subtracted in 200 components = 0.000228254 Jy ! Clean residual min=-0.004532 max=0.005157 Jy/beam ! Clean residual mean=-0.000039 rms=0.001332 Jy/beam ! Combined flux in latest and established models = 0.882364 Jy ! Adding 54 model components to the UV plane model. ! The established model now contains 118 components and 0.882364 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.736 mas, bmaj=3.198 mas, bpa=-64.28 degrees ! Estimated noise=1.05478 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000923176 Jy ! Component: 100 - total flux cleaned = 0.000856789 Jy ! Component: 150 - total flux cleaned = 0.000858407 Jy ! Component: 200 - total flux cleaned = 0.000859242 Jy ! Total flux subtracted in 200 components = 0.000859242 Jy ! Clean residual min=-0.004081 max=0.004120 Jy/beam ! Clean residual mean=-0.000017 rms=0.000933 Jy/beam ! Combined flux in latest and established models = 0.883223 Jy selfcal ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 127 components and 0.883223 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108827Jy sigma=0.768399 ! Fit after self-cal, rms=0.108826Jy sigma=0.767290 wmodel J2212+2355_S_map.mod ! Writing 127 model components to file: J2212+2355_S_map.mod wobs J2212+2355_S_uvs.fits ! Writing UV FITS file: J2212+2355_S_uvs.fits wwins J2212+2355_S_map.win ! wwins: Wrote 4 windows to J2212+2355_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 1.64134e-05 Jy ! Component: 100 - total flux cleaned = 8.48037e-05 Jy ! Component: 150 - total flux cleaned = -5.04933e-05 Jy ! Component: 200 - total flux cleaned = -0.000180724 Jy ! Component: 250 - total flux cleaned = 1.06952e-05 Jy ! Component: 300 - total flux cleaned = 0.000135872 Jy ! Component: 350 - total flux cleaned = 0.000319965 Jy ! Component: 400 - total flux cleaned = 0.000499291 Jy ! Component: 450 - total flux cleaned = 0.000556753 Jy ! Component: 500 - total flux cleaned = 0.000556158 Jy ! Component: 550 - total flux cleaned = 0.000613302 Jy ! Component: 600 - total flux cleaned = 0.000612612 Jy ! Component: 650 - total flux cleaned = 0.000444577 Jy ! Component: 700 - total flux cleaned = 0.000555815 Jy ! Component: 750 - total flux cleaned = 0.000501078 Jy ! Component: 800 - total flux cleaned = 0.000663727 Jy ! Component: 850 - total flux cleaned = 0.00060985 Jy ! Component: 900 - total flux cleaned = 0.000768466 Jy ! Component: 950 - total flux cleaned = 0.00066264 Jy ! Component: 1000 - total flux cleaned = 0.000610456 Jy ! Component: 1050 - total flux cleaned = 0.00086888 Jy ! Component: 1100 - total flux cleaned = 0.000766225 Jy ! Component: 1150 - total flux cleaned = 0.000969853 Jy ! Component: 1200 - total flux cleaned = 0.000868093 Jy ! Component: 1250 - total flux cleaned = 0.000818145 Jy ! Component: 1300 - total flux cleaned = 0.000818368 Jy ! Component: 1350 - total flux cleaned = 0.000917513 Jy ! Component: 1400 - total flux cleaned = 0.000917803 Jy ! Component: 1450 - total flux cleaned = 0.000965928 Jy ! Component: 1500 - total flux cleaned = 0.000966283 Jy ! Component: 1550 - total flux cleaned = 0.00125389 Jy ! Component: 1600 - total flux cleaned = 0.00106326 Jy ! Component: 1650 - total flux cleaned = 0.00144202 Jy ! Component: 1700 - total flux cleaned = 0.00134749 Jy ! Component: 1750 - total flux cleaned = 0.00134736 Jy ! Component: 1800 - total flux cleaned = 0.00148659 Jy ! Component: 1850 - total flux cleaned = 0.00157899 Jy ! Component: 1900 - total flux cleaned = 0.00171662 Jy ! Component: 1950 - total flux cleaned = 0.00148841 Jy ! Component: 2000 - total flux cleaned = 0.00157926 Jy ! Component: 2050 - total flux cleaned = 0.00144407 Jy ! Component: 2100 - total flux cleaned = 0.00153408 Jy ! Component: 2150 - total flux cleaned = 0.00153396 Jy ! Component: 2200 - total flux cleaned = 0.00144523 Jy ! Component: 2250 - total flux cleaned = 0.00140109 Jy ! Component: 2300 - total flux cleaned = 0.00135788 Jy ! Component: 2350 - total flux cleaned = 0.00127043 Jy ! Component: 2400 - total flux cleaned = 0.00114011 Jy ! Component: 2450 - total flux cleaned = 0.00118377 Jy ! Component: 2500 - total flux cleaned = 0.000968695 Jy ! Component: 2550 - total flux cleaned = 0.00109696 Jy ! Component: 2600 - total flux cleaned = 0.000883854 Jy ! Component: 2650 - total flux cleaned = 0.00075699 Jy ! Component: 2700 - total flux cleaned = 0.000799446 Jy ! Component: 2750 - total flux cleaned = 0.000505694 Jy ! Component: 2800 - total flux cleaned = 0.000548008 Jy ! Component: 2850 - total flux cleaned = 0.000506162 Jy ! Component: 2900 - total flux cleaned = 0.000506281 Jy ! Component: 2950 - total flux cleaned = 0.000259498 Jy ! Component: 3000 - total flux cleaned = 0.000218252 Jy ! Component: 3050 - total flux cleaned = 0.000136598 Jy ! Component: 3100 - total flux cleaned = 9.58534e-05 Jy ! Component: 3150 - total flux cleaned = 5.54418e-05 Jy ! Component: 3200 - total flux cleaned = -2.52966e-05 Jy ! Component: 3250 - total flux cleaned = -0.000105216 Jy ! Component: 3300 - total flux cleaned = 1.44853e-05 Jy ! Component: 3350 - total flux cleaned = -0.000105006 Jy ! Component: 3400 - total flux cleaned = -0.000382072 Jy ! Component: 3450 - total flux cleaned = -0.000381947 Jy ! Component: 3500 - total flux cleaned = -0.000303326 Jy ! Component: 3550 - total flux cleaned = -0.000420495 Jy ! Component: 3600 - total flux cleaned = -0.000342411 Jy ! Component: 3650 - total flux cleaned = -0.000536121 Jy ! Component: 3700 - total flux cleaned = -0.000613392 Jy ! Component: 3750 - total flux cleaned = -0.00084405 Jy ! Component: 3800 - total flux cleaned = -0.000767418 Jy ! Component: 3850 - total flux cleaned = -0.000881802 Jy ! Component: 3900 - total flux cleaned = -0.000919714 Jy ! Component: 3950 - total flux cleaned = -0.00107097 Jy ! Component: 4000 - total flux cleaned = -0.00107128 Jy ! Component: 4050 - total flux cleaned = -0.00107102 Jy ! Total flux subtracted in 4096 components = -0.00107099 Jy ! Clean residual min=-0.002476 max=0.001903 Jy/beam ! Clean residual mean=-0.000009 rms=0.000650 Jy/beam ! Combined flux in latest and established models = 0.882152 Jy keep ! Adding 339 model components to the UV plane model. ! The established model now contains 466 components and 0.882152 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv123_uvs/J2212+2355_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.736 x 3.198 at -64.28 degrees (North through East) ! Clean map min=-0.0034978 max=0.63569 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv123_uvs/J2212+2355_S_map.fits wmodel /scr/pima/rv123_uvs/J2212+2355_S_map.mod ! Writing 466 model components to file: /scr/pima/rv123_uvs/J2212+2355_S_map.mod wobs /scr/pima/rv123_uvs/J2212+2355_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv123_uvs/J2212+2355_S_uvs.fits wwins /scr/pima/rv123_uvs/J2212+2355_S_map.win ! wwins: Wrote 5 windows to /scr/pima/rv123_uvs/J2212+2355_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.635691 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000648577 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.306081 0.306081 0.612162 1.22432 2.44865 4.8973 9.7946 19.5892 39.1784 78.3568 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0019 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.635 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 980.132 quit ! Quitting program ! Log file /scr/pima/rv123_uvs/J2212+2355_S_dfm.log closed on Sun Dec 23 05:06:38 2018