! Started logfile: /scr/pima/rv123_uvs/J2101-4219_X_dfm.log on Sun Dec 23 00:45:14 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv123_uvs/J2101-4219_X_uva.fits ! Reading UV FITS file: /scr/pima/rv123_uvs/J2101-4219_X_uva.fits ! AN table 1: 68 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.705882 visibilities/baseline/integration-bin. ! Found source: J2101-4219 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 89 lines of history. ! ! Reading 2880 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J2101-4219_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 2. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 3. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Correcting IF 4. ! A total of 100 telescope corrections were flagged in sub-array 1. ! ! Fit before self-cal, rms=1.014322Jy sigma=15.562371 ! Fit after self-cal, rms=0.829395Jy sigma=12.811324 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=0.7651 mas, bmaj=3.728 mas, bpa=-11.43 degrees ! Estimated noise=1.37548 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.106127 Jy ! Component: 100 - total flux cleaned = 0.156285 Jy ! Total flux subtracted in 100 components = 0.156285 Jy ! Clean residual min=-0.012951 max=0.025018 Jy/beam ! Clean residual mean=0.000016 rms=0.004025 Jy/beam ! Combined flux in latest and established models = 0.156285 Jy ! Performing phase self-cal ! Adding 37 model components to the UV plane model. ! The established model now contains 37 components and 0.156285 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113065Jy sigma=1.693261 ! Fit after self-cal, rms=0.112567Jy sigma=1.687293 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275821 Jy ! Component: 100 - total flux cleaned = 0.0427121 Jy ! Total flux subtracted in 100 components = 0.0427121 Jy ! Clean residual min=-0.011222 max=0.028716 Jy/beam ! Clean residual mean=0.000012 rms=0.003382 Jy/beam ! Combined flux in latest and established models = 0.198997 Jy ! Performing phase self-cal ! Adding 33 model components to the UV plane model. ! The established model now contains 65 components and 0.198997 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.096855Jy sigma=1.454278 ! Fit after self-cal, rms=0.096660Jy sigma=1.452455 ! Inverting map ! Added new window around map position (-4.4, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266966 Jy ! Component: 100 - total flux cleaned = 0.0419328 Jy ! Total flux subtracted in 100 components = 0.0419328 Jy ! Clean residual min=-0.009980 max=0.013074 Jy/beam ! Clean residual mean=0.000017 rms=0.002515 Jy/beam ! Combined flux in latest and established models = 0.24093 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 83 components and 0.24093 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.083213Jy sigma=1.242616 ! Fit after self-cal, rms=0.082220Jy sigma=1.226999 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.105 mas, bmaj=5.054 mas, bpa=-10.29 degrees ! Estimated noise=0.905914 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0257612 Jy ! Component: 100 - total flux cleaned = 0.0414487 Jy ! Component: 150 - total flux cleaned = 0.0513351 Jy ! Component: 200 - total flux cleaned = 0.0577823 Jy ! Total flux subtracted in 200 components = 0.0577823 Jy ! Clean residual min=-0.008727 max=0.014950 Jy/beam ! Clean residual mean=-0.000028 rms=0.002891 Jy/beam ! Combined flux in latest and established models = 0.298712 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 115 components and 0.298712 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.072900Jy sigma=1.086000 ! Fit after self-cal, rms=0.072367Jy sigma=1.077277 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.105 x 5.054 at -10.29 degrees (North through East) ! Clean map min=-0.0084073 max=0.146 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! FD 0.91 KP 1.15 LA 0.95 MK 0.86 ! OV 1.10 PT 0.89 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 KP 1.12 LA 0.94 MK 1.09 ! OV 1.12 PT 0.88 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.91 KP 1.18 LA 1.00 MK 0.98 ! OV 1.13 PT 0.93 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! FD 0.93 KP 1.18 LA 1.00 MK 0.93 ! OV 1.12 PT 0.92 ! ! ! Fit before self-cal, rms=0.072367Jy sigma=1.077277 ! Fit after self-cal, rms=0.067491Jy sigma=0.994563 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.085 mas, bmaj=5.01 mas, bpa=-10.28 degrees ! Estimated noise=0.904215 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-9.6, -3.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0106746 Jy ! Component: 100 - total flux cleaned = 0.0129564 Jy ! Component: 150 - total flux cleaned = 0.0148961 Jy ! Component: 200 - total flux cleaned = 0.0163717 Jy ! Total flux subtracted in 200 components = 0.0163717 Jy ! Clean residual min=-0.004652 max=0.004934 Jy/beam ! Clean residual mean=0.000041 rms=0.001249 Jy/beam ! Combined flux in latest and established models = 0.315084 Jy ! Performing phase self-cal ! Adding 54 model components to the UV plane model. ! The established model now contains 166 components and 0.315084 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065751Jy sigma=0.968480 ! Fit after self-cal, rms=0.065613Jy sigma=0.964741 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.065613Jy sigma=0.964741 ! Fit after self-cal, rms=0.064528Jy sigma=0.957038 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.085 mas, bmaj=5.01 mas, bpa=-10.45 degrees ! Estimated noise=0.899549 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00304445 Jy ! Component: 100 - total flux cleaned = 0.00411971 Jy ! Component: 150 - total flux cleaned = 0.00426382 Jy ! Component: 200 - total flux cleaned = 0.00448027 Jy ! Total flux subtracted in 200 components = 0.00448027 Jy ! Clean residual min=-0.003732 max=0.004345 Jy/beam ! Clean residual mean=0.000028 rms=0.001047 Jy/beam ! Combined flux in latest and established models = 0.319564 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 186 components and 0.319564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064361Jy sigma=0.954660 ! Fit after self-cal, rms=0.064326Jy sigma=0.954192 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00148566 Jy ! Component: 100 - total flux cleaned = 0.00174505 Jy ! Component: 150 - total flux cleaned = 0.00186258 Jy ! Component: 200 - total flux cleaned = 0.00197345 Jy ! Total flux subtracted in 200 components = 0.00197345 Jy ! Clean residual min=-0.003775 max=0.004250 Jy/beam ! Clean residual mean=0.000030 rms=0.001025 Jy/beam ! Combined flux in latest and established models = 0.321538 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 196 components and 0.321538 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064267Jy sigma=0.953387 ! Fit after self-cal, rms=0.064261Jy sigma=0.953297 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.064261Jy sigma=0.953297 ! Fit after self-cal, rms=0.063855Jy sigma=0.934828 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=1.087 mas, bmaj=5.025 mas, bpa=-10.24 degrees ! Estimated noise=0.900744 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00118997 Jy ! Component: 100 - total flux cleaned = 0.00139474 Jy ! Component: 150 - total flux cleaned = 0.00157362 Jy ! Component: 200 - total flux cleaned = 0.00170299 Jy ! Total flux subtracted in 200 components = 0.00170299 Jy ! Clean residual min=-0.003130 max=0.003971 Jy/beam ! Clean residual mean=0.000001 rms=0.000903 Jy/beam ! Combined flux in latest and established models = 0.323241 Jy selfcal ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 209 components and 0.323241 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063806Jy sigma=0.934103 ! Fit after self-cal, rms=0.063834Jy sigma=0.933847 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (25.2, -23). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00346505 Jy ! Component: 100 - total flux cleaned = 0.00392911 Jy ! Component: 150 - total flux cleaned = 0.00423993 Jy ! Component: 200 - total flux cleaned = 0.00442373 Jy ! Total flux subtracted in 200 components = 0.00442373 Jy ! Clean residual min=-0.002895 max=0.003536 Jy/beam ! Clean residual mean=0.000002 rms=0.000838 Jy/beam ! Combined flux in latest and established models = 0.327664 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 227 components and 0.327664 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063610Jy sigma=0.930977 ! Fit after self-cal, rms=0.063593Jy sigma=0.930653 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063593Jy sigma=0.930653 ! Fit after self-cal, rms=0.063462Jy sigma=0.930336 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=11.74 mas, bpa=5.683 degrees ! Estimated noise=1.04859 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00165676 Jy ! Component: 100 - total flux cleaned = 0.0022084 Jy ! Component: 150 - total flux cleaned = 0.00253667 Jy ! Component: 200 - total flux cleaned = 0.002796 Jy ! Total flux subtracted in 200 components = 0.002796 Jy ! Clean residual min=-0.003156 max=0.003559 Jy/beam ! Clean residual mean=0.000000 rms=0.000958 Jy/beam ! Combined flux in latest and established models = 0.33046 Jy selfcal ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 240 components and 0.33046 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063406Jy sigma=0.929670 ! Fit after self-cal, rms=0.063402Jy sigma=0.929586 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000501809 Jy ! Component: 100 - total flux cleaned = 0.000743027 Jy ! Component: 150 - total flux cleaned = 0.000938646 Jy ! Component: 200 - total flux cleaned = 0.00109755 Jy ! Total flux subtracted in 200 components = 0.00109755 Jy ! Clean residual min=-0.003094 max=0.003526 Jy/beam ! Clean residual mean=0.000001 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.331558 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 245 components and 0.331558 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063378Jy sigma=0.929310 ! Fit after self-cal, rms=0.063376Jy sigma=0.929295 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=1.085 mas, bmaj=5.009 mas, bpa=-10.3 degrees ! Estimated noise=0.898653 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.085 x 5.009 at -10.3 degrees (North through East) ! Clean map min=-0.0026528 max=0.14262 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=0.7495 mas, bmaj=3.665 mas, bpa=-11.21 degrees ! Estimated noise=1.3565 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.10487 Jy ! Component: 100 - total flux cleaned = 0.157179 Jy ! Component: 150 - total flux cleaned = 0.190796 Jy ! Component: 200 - total flux cleaned = 0.214429 Jy ! Total flux subtracted in 200 components = 0.214429 Jy ! Clean residual min=-0.008635 max=0.013932 Jy/beam ! Clean residual mean=-0.000004 rms=0.002498 Jy/beam ! Combined flux in latest and established models = 0.214429 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 53 model components to the UV plane model. ! The established model now contains 53 components and 0.214429 Jy ! Inverting map and beam ! Estimated beam: bmin=1.085 mas, bmaj=5.009 mas, bpa=-10.3 degrees ! Estimated noise=0.898653 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-1.6, -3.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0322089 Jy ! Component: 100 - total flux cleaned = 0.0510061 Jy ! Component: 150 - total flux cleaned = 0.0641247 Jy ! Component: 200 - total flux cleaned = 0.0739085 Jy ! Total flux subtracted in 200 components = 0.0739085 Jy ! Clean residual min=-0.005361 max=0.006110 Jy/beam ! Clean residual mean=-0.000047 rms=0.001680 Jy/beam ! Combined flux in latest and established models = 0.288337 Jy ! Adding 90 model components to the UV plane model. ! The established model now contains 129 components and 0.288337 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.369 mas, bmaj=11.74 mas, bpa=5.683 degrees ! Estimated noise=1.04859 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0100175 Jy ! Component: 100 - total flux cleaned = 0.0171024 Jy ! Component: 150 - total flux cleaned = 0.0226386 Jy ! Component: 200 - total flux cleaned = 0.0270832 Jy ! Total flux subtracted in 200 components = 0.0270832 Jy ! Clean residual min=-0.003939 max=0.003909 Jy/beam ! Clean residual mean=-0.000023 rms=0.001231 Jy/beam ! Combined flux in latest and established models = 0.315421 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035808 Jy ! Component: 100 - total flux cleaned = 0.00648909 Jy ! Component: 150 - total flux cleaned = 0.00888384 Jy ! Component: 200 - total flux cleaned = 0.0108835 Jy ! Total flux subtracted in 200 components = 0.0108835 Jy ! Clean residual min=-0.003403 max=0.003537 Jy/beam ! Clean residual mean=-0.000007 rms=0.001007 Jy/beam ! Combined flux in latest and established models = 0.326304 Jy ! Adding 97 model components to the UV plane model. ! The established model now contains 219 components and 0.326304 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=1.085 mas, bmaj=5.009 mas, bpa=-10.3 degrees ! Estimated noise=0.898653 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00224678 Jy ! Component: 100 - total flux cleaned = 0.0034988 Jy ! Component: 150 - total flux cleaned = 0.00375569 Jy ! Component: 200 - total flux cleaned = 0.00393553 Jy ! Total flux subtracted in 200 components = 0.00393553 Jy ! Clean residual min=-0.003026 max=0.003765 Jy/beam ! Clean residual mean=-0.000002 rms=0.000829 Jy/beam ! Combined flux in latest and established models = 0.33024 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 246 components and 0.33024 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.063486Jy sigma=0.930818 ! Fit after self-cal, rms=0.063399Jy sigma=0.929532 wmodel J2101-4219_X_map.mod ! Writing 246 model components to file: J2101-4219_X_map.mod wobs J2101-4219_X_uvs.fits ! Writing UV FITS file: J2101-4219_X_uvs.fits wwins J2101-4219_X_map.win ! wwins: Wrote 5 windows to J2101-4219_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000181669 Jy ! Component: 100 - total flux cleaned = 0.000130556 Jy ! Component: 150 - total flux cleaned = 3.006e-05 Jy ! Component: 200 - total flux cleaned = -0.000164234 Jy ! Component: 250 - total flux cleaned = -0.000445214 Jy ! Component: 300 - total flux cleaned = -0.000760658 Jy ! Component: 350 - total flux cleaned = -0.00102382 Jy ! Component: 400 - total flux cleaned = -0.00136565 Jy ! Component: 450 - total flux cleaned = -0.00165668 Jy ! Component: 500 - total flux cleaned = -0.00165691 Jy ! Component: 550 - total flux cleaned = -0.00177691 Jy ! Component: 600 - total flux cleaned = -0.00185493 Jy ! Component: 650 - total flux cleaned = -0.00189245 Jy ! Component: 700 - total flux cleaned = -0.00192989 Jy ! Component: 750 - total flux cleaned = -0.00200415 Jy ! Component: 800 - total flux cleaned = -0.00211308 Jy ! Component: 850 - total flux cleaned = -0.00218432 Jy ! Component: 900 - total flux cleaned = -0.00228935 Jy ! Component: 950 - total flux cleaned = -0.00235838 Jy ! Component: 1000 - total flux cleaned = -0.00249423 Jy ! Component: 1050 - total flux cleaned = -0.00266075 Jy ! Component: 1100 - total flux cleaned = -0.00275857 Jy ! Component: 1150 - total flux cleaned = -0.0029196 Jy ! Component: 1200 - total flux cleaned = -0.00301475 Jy ! Component: 1250 - total flux cleaned = -0.00313994 Jy ! Component: 1300 - total flux cleaned = -0.00329454 Jy ! Component: 1350 - total flux cleaned = -0.00344737 Jy ! Component: 1400 - total flux cleaned = -0.0035983 Jy ! Component: 1450 - total flux cleaned = -0.00383598 Jy ! Component: 1500 - total flux cleaned = -0.00404049 Jy ! Component: 1550 - total flux cleaned = -0.0040982 Jy ! Component: 1600 - total flux cleaned = -0.00427018 Jy ! Component: 1650 - total flux cleaned = -0.00432673 Jy ! Component: 1700 - total flux cleaned = -0.00446686 Jy ! Component: 1750 - total flux cleaned = -0.00457743 Jy ! Component: 1800 - total flux cleaned = -0.00471424 Jy ! Component: 1850 - total flux cleaned = -0.0048219 Jy ! Component: 1900 - total flux cleaned = -0.00484832 Jy ! Component: 1950 - total flux cleaned = -0.00492782 Jy ! Component: 2000 - total flux cleaned = -0.00497997 Jy ! Component: 2050 - total flux cleaned = -0.00505819 Jy ! Component: 2100 - total flux cleaned = -0.00513513 Jy ! Component: 2150 - total flux cleaned = -0.00518596 Jy ! Component: 2200 - total flux cleaned = -0.00513554 Jy ! Component: 2250 - total flux cleaned = -0.00518553 Jy ! Component: 2300 - total flux cleaned = -0.00518579 Jy ! Component: 2350 - total flux cleaned = -0.00523502 Jy ! Component: 2400 - total flux cleaned = -0.0053322 Jy ! Component: 2450 - total flux cleaned = -0.00533205 Jy ! Component: 2500 - total flux cleaned = -0.00533238 Jy ! Component: 2550 - total flux cleaned = -0.0053325 Jy ! Component: 2600 - total flux cleaned = -0.00545029 Jy ! Component: 2650 - total flux cleaned = -0.00537999 Jy ! Component: 2700 - total flux cleaned = -0.00540316 Jy ! Component: 2750 - total flux cleaned = -0.00549505 Jy ! Component: 2800 - total flux cleaned = -0.00556356 Jy ! Component: 2850 - total flux cleaned = -0.00549527 Jy ! Component: 2900 - total flux cleaned = -0.00554039 Jy ! Component: 2950 - total flux cleaned = -0.00560716 Jy ! Component: 3000 - total flux cleaned = -0.00554051 Jy ! Component: 3050 - total flux cleaned = -0.00558426 Jy ! Component: 3100 - total flux cleaned = -0.00556253 Jy ! Component: 3150 - total flux cleaned = -0.00560586 Jy ! Component: 3200 - total flux cleaned = -0.00564859 Jy ! Component: 3250 - total flux cleaned = -0.00560597 Jy ! Component: 3300 - total flux cleaned = -0.00566968 Jy ! Component: 3350 - total flux cleaned = -0.00566955 Jy ! Component: 3400 - total flux cleaned = -0.00571122 Jy ! Component: 3450 - total flux cleaned = -0.00571151 Jy ! Component: 3500 - total flux cleaned = -0.00575274 Jy ! Component: 3550 - total flux cleaned = -0.00579354 Jy ! Component: 3600 - total flux cleaned = -0.00579341 Jy ! Component: 3650 - total flux cleaned = -0.00587439 Jy ! Component: 3700 - total flux cleaned = -0.005834 Jy ! Component: 3750 - total flux cleaned = -0.00585397 Jy ! Component: 3800 - total flux cleaned = -0.00589371 Jy ! Component: 3850 - total flux cleaned = -0.00591359 Jy ! Component: 3900 - total flux cleaned = -0.00587452 Jy ! Component: 3950 - total flux cleaned = -0.00593292 Jy ! Component: 4000 - total flux cleaned = -0.00597173 Jy ! Component: 4050 - total flux cleaned = -0.00597162 Jy ! Total flux subtracted in 4096 components = -0.00591433 Jy ! Clean residual min=-0.001164 max=0.001160 Jy/beam ! Clean residual mean=0.000005 rms=0.000370 Jy/beam ! Combined flux in latest and established models = 0.324325 Jy keep ! Adding 282 model components to the UV plane model. ! The established model now contains 528 components and 0.324325 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv123_uvs/J2101-4219_X_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.085 x 5.009 at -10.3 degrees (North through East) ! Clean map min=-0.0023533 max=0.14167 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv123_uvs/J2101-4219_X_map.fits wmodel /scr/pima/rv123_uvs/J2101-4219_X_map.mod ! Writing 528 model components to file: /scr/pima/rv123_uvs/J2101-4219_X_map.mod wobs /scr/pima/rv123_uvs/J2101-4219_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv123_uvs/J2101-4219_X_uvs.fits wwins /scr/pima/rv123_uvs/J2101-4219_X_map.win ! wwins: Wrote 6 windows to /scr/pima/rv123_uvs/J2101-4219_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.141671 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000365039 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.773001 0.773001 1.546 3.09201 6.18401 12.368 24.736 49.4721 98.9442 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.001 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.141 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 388.097 quit ! Quitting program ! Log file /scr/pima/rv123_uvs/J2101-4219_X_dfm.log closed on Sun Dec 23 00:45:18 2018