! Started logfile: /scr/pima/rv123_uvs/J2038+5119_S_dfm.log on Sun Dec 23 05:06:12 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv123_uvs/J2038+5119_S_uva.fits ! Reading UV FITS file: /scr/pima/rv123_uvs/J2038+5119_S_uva.fits ! AN table 1: 3 integrations on 6 of 6 possible baselines. ! AN table 2: 16 integrations on 21 of 21 possible baselines. ! AN table 3: 27 integrations on 10 of 10 possible baselines. ! AN table 4: 3 integrations on 21 of 21 possible baselines. ! AN table 5: 26 integrations on 45 of 45 possible baselines. ! AN table 6: 4 integrations on 15 of 15 possible baselines. ! AN table 7: 35 integrations on 78 of 78 possible baselines. ! AN table 8: 4 integrations on 6 of 6 possible baselines. ! Apparent sampling: 0.394562 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J2038+5119 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 89 lines of history. ! ! Reading 7372 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J2038+5119_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 78 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 122 telescope corrections were flagged in sub-array 5. ! A total of 14 telescope corrections were flagged in sub-array 6. ! A total of 313 telescope corrections were flagged in sub-array 7. ! A total of 10 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 78 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 122 telescope corrections were flagged in sub-array 5. ! A total of 14 telescope corrections were flagged in sub-array 6. ! A total of 313 telescope corrections were flagged in sub-array 7. ! A total of 10 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 3. ! A total of 12 telescope corrections were flagged in sub-array 1. ! A total of 106 telescope corrections were flagged in sub-array 2. ! A total of 135 telescope corrections were flagged in sub-array 3. ! A total of 21 telescope corrections were flagged in sub-array 4. ! A total of 260 telescope corrections were flagged in sub-array 5. ! A total of 24 telescope corrections were flagged in sub-array 6. ! A total of 435 telescope corrections were flagged in sub-array 7. ! A total of 16 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 78 telescope corrections were flagged in sub-array 2. ! A total of 57 telescope corrections were flagged in sub-array 3. ! A total of 7 telescope corrections were flagged in sub-array 4. ! A total of 122 telescope corrections were flagged in sub-array 5. ! A total of 14 telescope corrections were flagged in sub-array 6. ! A total of 313 telescope corrections were flagged in sub-array 7. ! A total of 10 telescope corrections were flagged in sub-array 8. ! ! Fit before self-cal, rms=2.625125Jy sigma=21.701806 ! Fit after self-cal, rms=1.542423Jy sigma=11.949855 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.354 mas, bmaj=3.008 mas, bpa=34.55 degrees ! Estimated noise=1.75062 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.4466 Jy ! Component: 100 - total flux cleaned = 1.926 Jy ! Total flux subtracted in 100 components = 1.926 Jy ! Clean residual min=-0.072766 max=0.280488 Jy/beam ! Clean residual mean=-0.000560 rms=0.019665 Jy/beam ! Combined flux in latest and established models = 1.926 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 18 components and 1.926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.968963Jy sigma=7.196951 ! Fit after self-cal, rms=0.968605Jy sigma=7.195902 ! Inverting map ! Added new window around map position (-4, -5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.314586 Jy ! Component: 100 - total flux cleaned = 0.535931 Jy ! Total flux subtracted in 100 components = 0.535931 Jy ! Clean residual min=-0.067772 max=0.132032 Jy/beam ! Clean residual mean=-0.000380 rms=0.015190 Jy/beam ! Combined flux in latest and established models = 2.46193 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 33 components and 2.46193 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.750682Jy sigma=5.491349 ! Fit after self-cal, rms=0.746734Jy sigma=5.447595 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.180265 Jy ! Component: 100 - total flux cleaned = 0.319424 Jy ! Total flux subtracted in 100 components = 0.319424 Jy ! Clean residual min=-0.062048 max=0.096716 Jy/beam ! Clean residual mean=-0.000277 rms=0.013017 Jy/beam ! Combined flux in latest and established models = 2.78136 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 49 components and 2.78136 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.642500Jy sigma=4.663484 ! Fit after self-cal, rms=0.640180Jy sigma=4.637024 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120288 Jy ! Component: 100 - total flux cleaned = 0.215694 Jy ! Total flux subtracted in 100 components = 0.215694 Jy ! Clean residual min=-0.057984 max=0.076391 Jy/beam ! Clean residual mean=-0.000208 rms=0.011882 Jy/beam ! Combined flux in latest and established models = 2.99705 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 62 components and 2.99705 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.581860Jy sigma=4.220861 ! Fit after self-cal, rms=0.580951Jy sigma=4.207608 ! Inverting map ! Added new window around map position (-3.5, -2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.086589 Jy ! Component: 100 - total flux cleaned = 0.155466 Jy ! Total flux subtracted in 100 components = 0.155466 Jy ! Clean residual min=-0.056257 max=0.064372 Jy/beam ! Clean residual mean=-0.000158 rms=0.011241 Jy/beam ! Combined flux in latest and established models = 3.15252 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 73 components and 3.15252 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.545891Jy sigma=3.973928 ! Fit after self-cal, rms=0.545574Jy sigma=3.966604 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.797 mas, bmaj=3.422 mas, bpa=43.76 degrees ! Estimated noise=1.45749 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3, -9.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.120022 Jy ! Component: 100 - total flux cleaned = 0.206119 Jy ! Component: 150 - total flux cleaned = 0.270759 Jy ! Component: 200 - total flux cleaned = 0.320491 Jy ! Total flux subtracted in 200 components = 0.320491 Jy ! Clean residual min=-0.050380 max=0.063158 Jy/beam ! Clean residual mean=0.000191 rms=0.012601 Jy/beam ! Combined flux in latest and established models = 3.47301 Jy ! Performing phase self-cal ! Adding 55 model components to the UV plane model. ! The established model now contains 116 components and 3.47301 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.490126Jy sigma=3.675315 ! Fit after self-cal, rms=0.487857Jy sigma=3.649005 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.797 x 3.422 at 43.76 degrees (North through East) ! Clean map min=-0.046769 max=1.9833 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* NY 0.00* ON 0.00* YG 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.00 HN 0.94 MC 1.12 NL 1.29 ! NY 1.44 WN 1.00* WZ 0.94 ! ! A total of 54 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.11 HN 0.93 NL 1.24 ON 0.85 ! WN 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.10 FD 1.17 HN 0.92 LA 0.95 ! NL 1.12 NY 1.50 SC 0.89 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.14 FD 1.06 HN 0.89 KP 0.95 ! LA 0.93 MC 1.10 NL 1.08 ON 0.84 ! OV 0.93 SC 0.95 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.10 KP 0.90 LA 0.87 MC 1.24 ! OV 0.95 WN 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.12 FD 1.04 KP 0.93 LA 0.88 ! MK 1.09 NL 1.08 NY 1.48 ON 0.95 ! OV 0.96 PT 1.02 SC 0.91 WN 1.00* ! WZ 1.11 ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* HN 0.00* MK 0.00* WN 0.00* ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* NY 0.00* ON 0.00* YG 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.96 HN 0.96 MC 0.96 NL 1.28 ! NY 1.32 WN 1.00* WZ 0.88 ! ! A total of 54 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.07 HN 0.94 NL 1.23 ON 0.98 ! WN 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.08 FD 1.19 HN 0.92 LA 0.99 ! NL 1.11 NY 1.34 SC 0.88 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.10 FD 1.07 HN 0.89 KP 0.93 ! LA 0.93 MC 0.93 NL 1.08 ON 0.97 ! OV 0.73 SC 0.92 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.06 KP 0.91 LA 0.91 MC 1.03 ! OV 0.71 WN 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.09 FD 1.07 KP 0.92 LA 0.91 ! MK 1.05 NL 1.07 NY 1.30 ON 1.08 ! OV 0.83 PT 1.04 SC 0.91 WN 1.00* ! WZ 0.87 ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* HN 0.00* MK 0.00* WN 0.00* ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* NY 0.00* ON 0.00* YG 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* HN 0.00* MC 0.00* NL 0.00* ! NY 0.00* WN 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* HN 0.00* NL 0.00* ON 0.00* ! WN 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! NL 0.00* NY 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MC 0.00* NL 0.00* ON 0.00* ! OV 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! FD 0.00* KP 0.00* LA 0.00* MC 0.00* ! OV 0.00* WN 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00* KP 1.00* LA 1.00* ! MK 3.61 NL 1.00* NY 1.45 ON 0.69 ! OV 1.00* PT 1.00* SC 1.00* WN 1.00* ! WZ 0.71 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* HN 0.00* MK 0.00* WN 0.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* NY 0.00* ON 0.00* YG 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.99 HN 0.92 MC 1.20 NL 1.24 ! NY 1.43 WN 1.00* WZ 0.73 ! ! A total of 54 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 HN 0.94 NL 1.25 ON 0.71 ! WN 1.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 1.06 FD 1.17 HN 0.94 LA 0.95 ! NL 1.11 NY 1.35 SC 0.87 ! ! A total of 12 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 1.08 FD 1.04 HN 0.91 KP 0.94 ! LA 0.94 MC 1.09 NL 1.08 ON 0.78 ! OV 0.90 SC 0.90 ! ! Telescope amplitude corrections in sub-array 6: ! FD 1.04 KP 0.91 LA 0.92 MC 1.19 ! OV 0.88 WN 1.00* ! ! A total of 24 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.10 FD 1.08 KP 0.91 LA 0.87 ! MK 1.03 NL 1.09 NY 1.29 ON 0.83 ! OV 0.91 PT 1.01 SC 0.88 WN 1.00* ! WZ 0.85 ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* HN 0.00* MK 0.00* WN 0.00* ! ! ! Fit before self-cal, rms=0.487857Jy sigma=3.649005 ! Fit after self-cal, rms=0.262737Jy sigma=2.066727 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.698 mas, bmaj=3.544 mas, bpa=42.8 degrees ! Estimated noise=1.51538 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-7.5, -10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0516396 Jy ! Component: 100 - total flux cleaned = 0.0819911 Jy ! Component: 150 - total flux cleaned = 0.0911656 Jy ! Component: 200 - total flux cleaned = 0.0990609 Jy ! Total flux subtracted in 200 components = 0.0990609 Jy ! Clean residual min=-0.024345 max=0.045426 Jy/beam ! Clean residual mean=0.000055 rms=0.006655 Jy/beam ! Combined flux in latest and established models = 3.57207 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 132 components and 3.57207 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.244235Jy sigma=1.968782 ! Fit after self-cal, rms=0.243092Jy sigma=1.952494 ! Inverting map ! Added new window around map position (-11, -21). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0491886 Jy ! Component: 100 - total flux cleaned = 0.0815925 Jy ! Component: 150 - total flux cleaned = 0.1059 Jy ! Component: 200 - total flux cleaned = 0.123698 Jy ! Total flux subtracted in 200 components = 0.123698 Jy ! Clean residual min=-0.022596 max=0.025971 Jy/beam ! Clean residual mean=0.000094 rms=0.005578 Jy/beam ! Combined flux in latest and established models = 3.69577 Jy ! Performing phase self-cal ! Adding 49 model components to the UV plane model. ! The established model now contains 173 components and 3.69577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224759Jy sigma=1.854956 ! Fit after self-cal, rms=0.223400Jy sigma=1.843856 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.223400Jy sigma=1.843856 ! Fit after self-cal, rms=0.181464Jy sigma=1.124947 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.704 mas, bmaj=3.508 mas, bpa=43.16 degrees ! Estimated noise=1.50885 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0266317 Jy ! Component: 100 - total flux cleaned = 0.0461398 Jy ! Component: 150 - total flux cleaned = 0.0558383 Jy ! Component: 200 - total flux cleaned = 0.0638931 Jy ! Total flux subtracted in 200 components = 0.0638931 Jy ! Clean residual min=-0.012594 max=0.021174 Jy/beam ! Clean residual mean=0.000082 rms=0.003856 Jy/beam ! Combined flux in latest and established models = 3.75966 Jy selfcal ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 203 components and 3.75966 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.172220Jy sigma=1.061613 ! Fit after self-cal, rms=0.171667Jy sigma=1.055016 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-12, -29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0222191 Jy ! Component: 100 - total flux cleaned = 0.0390757 Jy ! Component: 150 - total flux cleaned = 0.0527283 Jy ! Component: 200 - total flux cleaned = 0.0623088 Jy ! Total flux subtracted in 200 components = 0.0623088 Jy ! Clean residual min=-0.011221 max=0.017657 Jy/beam ! Clean residual mean=0.000103 rms=0.003427 Jy/beam ! Combined flux in latest and established models = 3.82197 Jy ! Performing phase self-cal ! Adding 46 model components to the UV plane model. ! The established model now contains 229 components and 3.82197 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.164799Jy sigma=1.008879 ! Fit after self-cal, rms=0.164453Jy sigma=1.006619 ! Inverting map ! Added new window around map position (-12.5, -103). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0182918 Jy ! Component: 100 - total flux cleaned = 0.0296276 Jy ! Component: 150 - total flux cleaned = 0.0366769 Jy ! Component: 200 - total flux cleaned = 0.0440854 Jy ! Total flux subtracted in 200 components = 0.0440854 Jy ! Clean residual min=-0.010599 max=0.014665 Jy/beam ! Clean residual mean=0.000104 rms=0.003147 Jy/beam ! Combined flux in latest and established models = 3.86605 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 257 components and 3.86605 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.159792Jy sigma=0.974570 ! Fit after self-cal, rms=0.159544Jy sigma=0.972953 ! Inverting map ! Added new window around map position (-8.5, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131877 Jy ! Component: 100 - total flux cleaned = 0.0217345 Jy ! Component: 150 - total flux cleaned = 0.0276604 Jy ! Component: 200 - total flux cleaned = 0.0335856 Jy ! Total flux subtracted in 200 components = 0.0335856 Jy ! Clean residual min=-0.010182 max=0.013217 Jy/beam ! Clean residual mean=0.000112 rms=0.002952 Jy/beam ! Combined flux in latest and established models = 3.89964 Jy ! Performing phase self-cal ! Adding 62 model components to the UV plane model. ! The established model now contains 284 components and 3.89964 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.156718Jy sigma=0.949686 ! Fit after self-cal, rms=0.156509Jy sigma=0.948584 ! Inverting map ! Added new window around map position (-49, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.011673 Jy ! Component: 100 - total flux cleaned = 0.0188365 Jy ! Component: 150 - total flux cleaned = 0.0241971 Jy ! Component: 200 - total flux cleaned = 0.0292746 Jy ! Total flux subtracted in 200 components = 0.0292746 Jy ! Clean residual min=-0.009650 max=0.011666 Jy/beam ! Clean residual mean=0.000113 rms=0.002812 Jy/beam ! Combined flux in latest and established models = 3.92891 Jy ! Performing phase self-cal ! Adding 60 model components to the UV plane model. ! The established model now contains 299 components and 3.92891 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154267Jy sigma=0.931361 ! Fit after self-cal, rms=0.154108Jy sigma=0.930627 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.154108Jy sigma=0.930627 ! Fit after self-cal, rms=0.138208Jy sigma=0.866023 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.694 mas, bmaj=3.508 mas, bpa=43.16 degrees ! Estimated noise=1.50563 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0116464 Jy ! Component: 100 - total flux cleaned = 0.0193914 Jy ! Component: 150 - total flux cleaned = 0.0250333 Jy ! Component: 200 - total flux cleaned = 0.0302724 Jy ! Total flux subtracted in 200 components = 0.0302724 Jy ! Clean residual min=-0.008694 max=0.010863 Jy/beam ! Clean residual mean=0.000088 rms=0.002390 Jy/beam ! Combined flux in latest and established models = 3.95919 Jy selfcal ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 318 components and 3.95919 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.135533Jy sigma=0.848256 ! Fit after self-cal, rms=0.135404Jy sigma=0.847490 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-16.5, -109.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0103752 Jy ! Component: 100 - total flux cleaned = 0.0166025 Jy ! Component: 150 - total flux cleaned = 0.0208089 Jy ! Component: 200 - total flux cleaned = 0.0253327 Jy ! Total flux subtracted in 200 components = 0.0253327 Jy ! Clean residual min=-0.007869 max=0.009056 Jy/beam ! Clean residual mean=0.000086 rms=0.002248 Jy/beam ! Combined flux in latest and established models = 3.98452 Jy ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 342 components and 3.98452 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133086Jy sigma=0.833438 ! Fit after self-cal, rms=0.132977Jy sigma=0.832527 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132977Jy sigma=0.832527 ! Fit after self-cal, rms=0.129191Jy sigma=0.828485 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.44 mas, bmaj=10.24 mas, bpa=-75.38 degrees ! Estimated noise=2.32457 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187505 Jy ! Component: 100 - total flux cleaned = 0.0336117 Jy ! Component: 150 - total flux cleaned = 0.0460435 Jy ! Component: 200 - total flux cleaned = 0.0566593 Jy ! Total flux subtracted in 200 components = 0.0566593 Jy ! Clean residual min=-0.010882 max=0.017838 Jy/beam ! Clean residual mean=0.000236 rms=0.004247 Jy/beam ! Combined flux in latest and established models = 4.04118 Jy selfcal ! Performing phase self-cal ! Adding 56 model components to the UV plane model. ! The established model now contains 385 components and 4.04118 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126925Jy sigma=0.822900 ! Fit after self-cal, rms=0.126688Jy sigma=0.821041 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0105499 Jy ! Component: 100 - total flux cleaned = 0.0195692 Jy ! Component: 150 - total flux cleaned = 0.0274502 Jy ! Component: 200 - total flux cleaned = 0.0344131 Jy ! Total flux subtracted in 200 components = 0.0344131 Jy ! Clean residual min=-0.010240 max=0.017300 Jy/beam ! Clean residual mean=0.000235 rms=0.003936 Jy/beam ! Combined flux in latest and established models = 4.07559 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 403 components and 4.07559 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125910Jy sigma=0.823459 ! Fit after self-cal, rms=0.125810Jy sigma=0.822819 ! Inverting map ! Added new window around map position (-24, -125.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0170424 Jy ! Component: 100 - total flux cleaned = 0.0268242 Jy ! Component: 150 - total flux cleaned = 0.034882 Jy ! Component: 200 - total flux cleaned = 0.0419567 Jy ! Total flux subtracted in 200 components = 0.0419567 Jy ! Clean residual min=-0.008556 max=0.011289 Jy/beam ! Clean residual mean=0.000198 rms=0.003417 Jy/beam ! Combined flux in latest and established models = 4.11755 Jy ! Performing phase self-cal ! Adding 84 model components to the UV plane model. ! The established model now contains 475 components and 4.11755 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.124040Jy sigma=0.817971 ! Fit after self-cal, rms=0.123914Jy sigma=0.816570 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.691 mas, bmaj=3.51 mas, bpa=43.25 degrees ! Estimated noise=1.50515 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.691 x 3.51 at 43.25 degrees (North through East) ! Clean map min=-0.0063678 max=1.9554 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123914Jy sigma=0.816570 ! Fit after self-cal, rms=0.119506Jy sigma=0.741689 ! Inverting map and beam ! Estimated beam: bmin=2.693 mas, bmaj=3.509 mas, bpa=43.22 degrees ! Estimated noise=1.50719 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00575041 Jy ! Component: 100 - total flux cleaned = 0.0087117 Jy ! Component: 150 - total flux cleaned = 0.011113 Jy ! Component: 200 - total flux cleaned = 0.0128564 Jy ! Total flux subtracted in 200 components = 0.0128564 Jy ! Clean residual min=-0.006798 max=0.007564 Jy/beam ! Clean residual mean=0.000067 rms=0.001792 Jy/beam ! Combined flux in latest and established models = 4.1304 Jy ! Performing phase self-cal ! Adding 35 model components to the UV plane model. ! The established model now contains 495 components and 4.1304 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117878Jy sigma=0.728730 ! Fit after self-cal, rms=0.117823Jy sigma=0.728280 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00220308 Jy ! Component: 100 - total flux cleaned = 0.0037998 Jy ! Component: 150 - total flux cleaned = 0.00574602 Jy ! Component: 200 - total flux cleaned = 0.00738319 Jy ! Total flux subtracted in 200 components = 0.00738319 Jy ! Clean residual min=-0.006657 max=0.007533 Jy/beam ! Clean residual mean=0.000062 rms=0.001739 Jy/beam ! Combined flux in latest and established models = 4.13779 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 509 components and 4.13779 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116902Jy sigma=0.720327 ! Fit after self-cal, rms=0.116867Jy sigma=0.720128 ! Inverting map ! Added new window around map position (-95.5, -6.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00573759 Jy ! Component: 100 - total flux cleaned = 0.00883097 Jy ! Component: 150 - total flux cleaned = 0.0109788 Jy ! Component: 200 - total flux cleaned = 0.0130358 Jy ! Total flux subtracted in 200 components = 0.0130358 Jy ! Clean residual min=-0.006609 max=0.007024 Jy/beam ! Clean residual mean=0.000057 rms=0.001687 Jy/beam ! Combined flux in latest and established models = 4.15082 Jy ! Performing phase self-cal ! Adding 52 model components to the UV plane model. ! The established model now contains 521 components and 4.15082 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115822Jy sigma=0.713354 ! Fit after self-cal, rms=0.115796Jy sigma=0.713087 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.115796Jy sigma=0.713087 ! Fit after self-cal, rms=0.111731Jy sigma=0.709867 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.329 mas, bmaj=3.077 mas, bpa=32.71 degrees ! Estimated noise=1.83597 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 1.4712 Jy ! Component: 100 - total flux cleaned = 1.96041 Jy ! Component: 150 - total flux cleaned = 2.28174 Jy ! Component: 200 - total flux cleaned = 2.51771 Jy ! Total flux subtracted in 200 components = 2.51771 Jy ! Clean residual min=-0.038598 max=0.138047 Jy/beam ! Clean residual mean=-0.000410 rms=0.010801 Jy/beam ! Combined flux in latest and established models = 2.51771 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 42 model components to the UV plane model. ! The established model now contains 42 components and 2.51771 Jy ! Inverting map and beam ! Estimated beam: bmin=2.689 mas, bmaj=3.512 mas, bpa=43.38 degrees ! Estimated noise=1.50714 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.278842 Jy ! Component: 100 - total flux cleaned = 0.474264 Jy ! Component: 150 - total flux cleaned = 0.616504 Jy ! Component: 200 - total flux cleaned = 0.722794 Jy ! Total flux subtracted in 200 components = 0.722794 Jy ! Clean residual min=-0.026893 max=0.062927 Jy/beam ! Clean residual mean=-0.000155 rms=0.008477 Jy/beam ! Combined flux in latest and established models = 3.2405 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 108 components and 3.2405 Jy ! Inverting map ! Added new window around map position (-6.5, -16). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0845236 Jy ! Component: 100 - total flux cleaned = 0.154872 Jy ! Component: 150 - total flux cleaned = 0.214064 Jy ! Component: 200 - total flux cleaned = 0.264263 Jy ! Total flux subtracted in 200 components = 0.264263 Jy ! Clean residual min=-0.018412 max=0.031602 Jy/beam ! Clean residual mean=-0.000046 rms=0.005551 Jy/beam ! Combined flux in latest and established models = 3.50476 Jy ! Adding 59 model components to the UV plane model. ! The established model now contains 150 components and 3.50476 Jy ! Inverting map ! Added new window around map position (2.5, 1). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0433623 Jy ! Component: 100 - total flux cleaned = 0.0810863 Jy ! Component: 150 - total flux cleaned = 0.114733 Jy ! Component: 200 - total flux cleaned = 0.145299 Jy ! Total flux subtracted in 200 components = 0.145299 Jy ! Clean residual min=-0.014512 max=0.020091 Jy/beam ! Clean residual mean=0.000006 rms=0.004327 Jy/beam ! Combined flux in latest and established models = 3.65006 Jy ! Adding 94 model components to the UV plane model. ! The established model now contains 211 components and 3.65006 Jy ! Inverting map ! Added new window around map position (-13, -37). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0280321 Jy ! Component: 100 - total flux cleaned = 0.0538696 Jy ! Component: 150 - total flux cleaned = 0.0778431 Jy ! Component: 200 - total flux cleaned = 0.100184 Jy ! Total flux subtracted in 200 components = 0.100184 Jy ! Clean residual min=-0.012238 max=0.015264 Jy/beam ! Clean residual mean=0.000031 rms=0.003585 Jy/beam ! Combined flux in latest and established models = 3.75025 Jy ! Adding 83 model components to the UV plane model. ! The established model now contains 254 components and 3.75025 Jy ! Inverting map ! Added new window around map position (-6.5, -2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0210346 Jy ! Component: 100 - total flux cleaned = 0.0406841 Jy ! Component: 150 - total flux cleaned = 0.0591281 Jy ! Component: 200 - total flux cleaned = 0.0764638 Jy ! Total flux subtracted in 200 components = 0.0764638 Jy ! Clean residual min=-0.010874 max=0.012782 Jy/beam ! Clean residual mean=0.000042 rms=0.003068 Jy/beam ! Combined flux in latest and established models = 3.82671 Jy ! Adding 98 model components to the UV plane model. ! The established model now contains 304 components and 3.82671 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.434 mas, bmaj=10.24 mas, bpa=-75.35 degrees ! Estimated noise=2.33034 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0419042 Jy ! Component: 100 - total flux cleaned = 0.0767161 Jy ! Component: 150 - total flux cleaned = 0.106668 Jy ! Component: 200 - total flux cleaned = 0.132839 Jy ! Total flux subtracted in 200 components = 0.132839 Jy ! Clean residual min=-0.014831 max=0.016945 Jy/beam ! Clean residual mean=0.000165 rms=0.005635 Jy/beam ! Combined flux in latest and established models = 3.95955 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0230816 Jy ! Component: 100 - total flux cleaned = 0.0436066 Jy ! Component: 150 - total flux cleaned = 0.0620423 Jy ! Component: 200 - total flux cleaned = 0.0786916 Jy ! Total flux subtracted in 200 components = 0.0786916 Jy ! Clean residual min=-0.011340 max=0.013506 Jy/beam ! Clean residual mean=0.000182 rms=0.004470 Jy/beam ! Combined flux in latest and established models = 4.03824 Jy ! Adding 273 model components to the UV plane model. ! The established model now contains 553 components and 4.03824 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.689 mas, bmaj=3.512 mas, bpa=43.38 degrees ! Estimated noise=1.50714 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00980023 Jy ! Component: 100 - total flux cleaned = 0.0183205 Jy ! Component: 150 - total flux cleaned = 0.0261707 Jy ! Component: 200 - total flux cleaned = 0.0335202 Jy ! Total flux subtracted in 200 components = 0.0335202 Jy ! Clean residual min=-0.006934 max=0.007065 Jy/beam ! Clean residual mean=0.000049 rms=0.001816 Jy/beam ! Combined flux in latest and established models = 4.07176 Jy selfcal ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 597 components and 4.07176 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.114266Jy sigma=0.714352 ! Fit after self-cal, rms=0.113794Jy sigma=0.705868 wmodel J2038+5119_S_map.mod ! Writing 597 model components to file: J2038+5119_S_map.mod wobs J2038+5119_S_uvs.fits ! Writing UV FITS file: J2038+5119_S_uvs.fits wwins J2038+5119_S_map.win ! wwins: Wrote 17 windows to J2038+5119_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00173243 Jy ! Component: 100 - total flux cleaned = 0.00361487 Jy ! Component: 150 - total flux cleaned = 0.00542756 Jy ! Component: 200 - total flux cleaned = 0.00694511 Jy ! Component: 250 - total flux cleaned = 0.00876456 Jy ! Component: 300 - total flux cleaned = 0.0106569 Jy ! Component: 350 - total flux cleaned = 0.0119679 Jy ! Component: 400 - total flux cleaned = 0.0133661 Jy ! Component: 450 - total flux cleaned = 0.0145318 Jy ! Component: 500 - total flux cleaned = 0.0158897 Jy ! Component: 550 - total flux cleaned = 0.0170235 Jy ! Component: 600 - total flux cleaned = 0.0184476 Jy ! Component: 650 - total flux cleaned = 0.0195518 Jy ! Component: 700 - total flux cleaned = 0.0207446 Jy ! Component: 750 - total flux cleaned = 0.0220224 Jy ! Component: 800 - total flux cleaned = 0.0230923 Jy ! Component: 850 - total flux cleaned = 0.0242488 Jy ! Component: 900 - total flux cleaned = 0.0256808 Jy ! Component: 950 - total flux cleaned = 0.0264366 Jy ! Component: 1000 - total flux cleaned = 0.02756 Jy ! Component: 1050 - total flux cleaned = 0.0284877 Jy ! Component: 1100 - total flux cleaned = 0.0294066 Jy ! Component: 1150 - total flux cleaned = 0.0304094 Jy ! Component: 1200 - total flux cleaned = 0.0312227 Jy ! Component: 1250 - total flux cleaned = 0.0320291 Jy ! Component: 1300 - total flux cleaned = 0.032652 Jy ! Component: 1350 - total flux cleaned = 0.0336228 Jy ! Component: 1400 - total flux cleaned = 0.0345859 Jy ! Component: 1450 - total flux cleaned = 0.0351064 Jy ! Component: 1500 - total flux cleaned = 0.0363125 Jy ! Component: 1550 - total flux cleaned = 0.037082 Jy ! Component: 1600 - total flux cleaned = 0.037506 Jy ! Component: 1650 - total flux cleaned = 0.0380962 Jy ! Component: 1700 - total flux cleaned = 0.0391851 Jy ! Component: 1750 - total flux cleaned = 0.0399328 Jy ! Component: 1800 - total flux cleaned = 0.0403465 Jy ! Component: 1850 - total flux cleaned = 0.0413303 Jy ! Component: 1900 - total flux cleaned = 0.0417377 Jy ! Component: 1950 - total flux cleaned = 0.0427092 Jy ! Component: 2000 - total flux cleaned = 0.0435137 Jy ! Component: 2050 - total flux cleaned = 0.043993 Jy ! Component: 2100 - total flux cleaned = 0.0448667 Jy ! Component: 2150 - total flux cleaned = 0.0454985 Jy ! Component: 2200 - total flux cleaned = 0.0465965 Jy ! Component: 2250 - total flux cleaned = 0.0472201 Jy ! Component: 2300 - total flux cleaned = 0.0477628 Jy ! Component: 2350 - total flux cleaned = 0.0486105 Jy ! Component: 2400 - total flux cleaned = 0.0494537 Jy ! Component: 2450 - total flux cleaned = 0.0500629 Jy ! Component: 2500 - total flux cleaned = 0.0507442 Jy ! Component: 2550 - total flux cleaned = 0.0514229 Jy ! Component: 2600 - total flux cleaned = 0.0521721 Jy ! Component: 2650 - total flux cleaned = 0.0525448 Jy ! Component: 2700 - total flux cleaned = 0.0531377 Jy ! Component: 2750 - total flux cleaned = 0.0540947 Jy ! Component: 2800 - total flux cleaned = 0.0549744 Jy ! Component: 2850 - total flux cleaned = 0.0553386 Jy ! Component: 2900 - total flux cleaned = 0.0562091 Jy ! Component: 2950 - total flux cleaned = 0.0561375 Jy ! Component: 3000 - total flux cleaned = 0.0571421 Jy ! Component: 3050 - total flux cleaned = 0.0577843 Jy ! Component: 3100 - total flux cleaned = 0.0584944 Jy ! Component: 3150 - total flux cleaned = 0.0589888 Jy ! Component: 3200 - total flux cleaned = 0.0594103 Jy ! Component: 3250 - total flux cleaned = 0.05955 Jy ! Component: 3300 - total flux cleaned = 0.0603153 Jy ! Component: 3350 - total flux cleaned = 0.0608695 Jy ! Component: 3400 - total flux cleaned = 0.0612139 Jy ! Component: 3450 - total flux cleaned = 0.0620372 Jy ! Component: 3500 - total flux cleaned = 0.0621741 Jy ! Component: 3550 - total flux cleaned = 0.0627852 Jy ! Component: 3600 - total flux cleaned = 0.0629213 Jy ! Component: 3650 - total flux cleaned = 0.0633924 Jy ! Component: 3700 - total flux cleaned = 0.0639954 Jy ! Component: 3750 - total flux cleaned = 0.0642621 Jy ! Component: 3800 - total flux cleaned = 0.0649263 Jy ! Component: 3850 - total flux cleaned = 0.065323 Jy ! Component: 3900 - total flux cleaned = 0.065652 Jy ! Component: 3950 - total flux cleaned = 0.0663727 Jy ! Component: 4000 - total flux cleaned = 0.0670252 Jy ! Component: 4050 - total flux cleaned = 0.0672197 Jy ! Total flux subtracted in 4096 components = 0.0674136 Jy ! Clean residual min=-0.003302 max=0.004104 Jy/beam ! Clean residual mean=0.000027 rms=0.001201 Jy/beam ! Combined flux in latest and established models = 4.13917 Jy keep ! Adding 371 model components to the UV plane model. ! The established model now contains 955 components and 4.13917 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv123_uvs/J2038+5119_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.689 x 3.512 at 43.38 degrees (North through East) ! Clean map min=-0.0049773 max=1.9764 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv123_uvs/J2038+5119_S_map.fits wmodel /scr/pima/rv123_uvs/J2038+5119_S_map.mod ! Writing 955 model components to file: /scr/pima/rv123_uvs/J2038+5119_S_map.mod wobs /scr/pima/rv123_uvs/J2038+5119_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv123_uvs/J2038+5119_S_uvs.fits wwins /scr/pima/rv123_uvs/J2038+5119_S_map.win ! wwins: Wrote 18 windows to /scr/pima/rv123_uvs/J2038+5119_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 1.9764 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.0011911 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.180798 0.180798 0.361597 0.723193 1.44639 2.89277 5.78554 11.5711 23.1422 46.2844 92.5687 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0035 print "peak= ", int(1000*peak_flux)/1000 ! peak= 1.976 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1659.31 quit ! Quitting program ! Log file /scr/pima/rv123_uvs/J2038+5119_S_dfm.log closed on Sun Dec 23 05:06:18 2018