! Started logfile: /scr/pima/rv123_uvs/J1619+2247_X_dfm.log on Sun Dec 23 00:43:38 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv123_uvs/J1619+2247_X_uva.fits ! Reading UV FITS file: /scr/pima/rv123_uvs/J1619+2247_X_uva.fits ! AN table 1: 89 integrations on 91 of 91 possible baselines. ! AN table 2: 7 integrations on 45 of 45 possible baselines. ! AN table 3: 20 integrations on 28 of 28 possible baselines. ! AN table 4: 10 integrations on 6 of 6 possible baselines. ! AN table 5: 101 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.305053 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1619+2247 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 89 lines of history. ! ! Reading 12872 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1619+2247_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 789 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 104 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! A total of 156 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 789 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 104 telescope corrections were flagged in sub-array 3. ! A total of 12 telescope corrections were flagged in sub-array 4. ! A total of 156 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 857 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 104 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 237 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 857 telescope corrections were flagged in sub-array 1. ! A total of 26 telescope corrections were flagged in sub-array 2. ! A total of 104 telescope corrections were flagged in sub-array 3. ! A total of 22 telescope corrections were flagged in sub-array 4. ! A total of 237 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.061352Jy sigma=13.248780 ! Fit after self-cal, rms=0.747515Jy sigma=9.026959 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Estimated beam: bmin=0.5238 mas, bmaj=0.8736 mas, bpa=-0.885 degrees ! Estimated noise=0.899093 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.238341 Jy ! Component: 100 - total flux cleaned = 0.345529 Jy ! Total flux subtracted in 100 components = 0.345529 Jy ! Clean residual min=-0.015034 max=0.067384 Jy/beam ! Clean residual mean=0.000034 rms=0.004039 Jy/beam ! Combined flux in latest and established models = 0.345529 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 12 components and 0.345529 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.174985Jy sigma=1.935196 ! Fit after self-cal, rms=0.171898Jy sigma=1.907523 ! Inverting map ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Added new window around map position (0.6, -0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0706965 Jy ! Component: 100 - total flux cleaned = 0.110241 Jy ! Total flux subtracted in 100 components = 0.110241 Jy ! Clean residual min=-0.012091 max=0.024734 Jy/beam ! Clean residual mean=-0.000028 rms=0.002591 Jy/beam ! Combined flux in latest and established models = 0.45577 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 19 components and 0.45577 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150579Jy sigma=1.480875 ! Fit after self-cal, rms=0.149030Jy sigma=1.466092 ! Inverting map ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0288793 Jy ! Component: 100 - total flux cleaned = 0.0470708 Jy ! Total flux subtracted in 100 components = 0.0470708 Jy ! Clean residual min=-0.011153 max=0.017251 Jy/beam ! Clean residual mean=-0.000055 rms=0.002212 Jy/beam ! Combined flux in latest and established models = 0.50284 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 25 components and 0.50284 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.148172Jy sigma=1.432485 ! Fit after self-cal, rms=0.147811Jy sigma=1.429416 ! Inverting map ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Added new window around map position (-0.2, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013147 Jy ! Component: 100 - total flux cleaned = 0.0177137 Jy ! Total flux subtracted in 100 components = 0.0177137 Jy ! Clean residual min=-0.010139 max=0.010315 Jy/beam ! Clean residual mean=-0.000065 rms=0.002088 Jy/beam ! Combined flux in latest and established models = 0.520554 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 29 components and 0.520554 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.147457Jy sigma=1.432293 ! Fit after self-cal, rms=0.147332Jy sigma=1.431577 ! Inverting map ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Estimated beam: bmin=0.5949 mas, bmaj=0.886 mas, bpa=2.43 degrees ! Estimated noise=0.607646 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0225692 Jy ! Component: 100 - total flux cleaned = -0.0353009 Jy ! Component: 150 - total flux cleaned = -0.042796 Jy ! Component: 200 - total flux cleaned = -0.0443799 Jy ! Total flux subtracted in 200 components = -0.0443799 Jy ! Clean residual min=-0.017234 max=0.011346 Jy/beam ! Clean residual mean=-0.003629 rms=0.003902 Jy/beam ! Combined flux in latest and established models = 0.476174 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 41 components and 0.476174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.142335Jy sigma=1.390992 ! Fit after self-cal, rms=0.142097Jy sigma=1.389973 ! Inverting map ! Your choice of large map pixels excluded 10.3% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5949 x 0.886 at 2.43 degrees (North through East) ! Clean map min=-0.016111 max=0.2628 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 54 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.86 HH 0.73 HN 1.01 ! KP 0.95 LA 0.96 MC 0.93 NL 0.97 ! NY 0.82 ON 0.91 OV 0.89 SC 0.94 ! WN 1.51 WZ 0.94 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.83 HN 1.02 KP 0.99 ! LA 0.93 MC 1.07 MK 0.98 NL 0.96 ! OV 0.91 WN 2.68 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.83 KP 0.98 LA 0.92 ! MK 0.99 OV 0.90 PT 0.81 YG 0.91 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.03 MK 1.05 NY 0.79 OV 0.95 ! ! A total of 48 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 0.85 NY 0.76 ON 0.87 WN 1.49 ! WZ 0.97 YG 1.23 ! ! ! Correcting IF 2. ! A total of 54 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.97 FD 0.89 HH 0.79 HN 1.01 ! KP 0.96 LA 0.96 MC 1.00 NL 0.97 ! NY 0.94 ON 0.88 OV 0.91 SC 0.93 ! WN 1.53 WZ 0.90 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.08 FD 0.81 HN 1.00 KP 1.02 ! LA 0.93 MC 1.10 MK 0.97 NL 0.99 ! OV 0.92 WN 2.59 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.02 FD 0.83 KP 1.02 LA 0.92 ! MK 1.04 OV 0.89 PT 0.80 YG 0.94 ! ! A total of 12 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 MK 1.08 NY 0.93 OV 0.90 ! ! A total of 48 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 0.83 NY 0.88 ON 0.82 WN 1.50 ! WZ 0.94 YG 1.12 ! ! ! Correcting IF 3. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.99 FD 0.87 HH 0.87 HN 1.05 ! KP 0.96 LA 0.98 MC 1.29 NL 1.00 ! NY 1.00* ON 1.22 OV 0.90 SC 0.91 ! WN 1.40 WZ 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.09 FD 0.80 HN 1.04 KP 1.00 ! LA 0.95 MC 1.58 MK 1.02 NL 0.98 ! OV 0.95 WN 2.37 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.03 FD 0.84 KP 1.02 LA 0.93 ! MK 1.07 OV 0.89 PT 0.81 YG 1.12 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MK 0.00* NY 0.00* OV 0.00* ! ! A total of 99 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 0.91 NY 1.00* ON 1.19 WN 1.42 ! WZ 1.00 YG 1.02 ! ! ! Correcting IF 4. ! A total of 120 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.98 FD 0.88 HH 0.97 HN 1.06 ! KP 0.98 LA 0.98 MC 1.28 NL 0.99 ! NY 1.00* ON 1.14 OV 0.88 SC 0.98 ! WN 1.39 WZ 0.99 ! ! Telescope amplitude corrections in sub-array 2: ! BR 1.13 FD 0.81 HN 1.07 KP 1.01 ! LA 0.90 MC 1.58 MK 0.98 NL 0.98 ! OV 0.95 WN 2.44 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 1.05 FD 0.82 KP 1.05 LA 0.94 ! MK 1.06 OV 0.91 PT 0.81 YG 1.44 ! ! A total of 18 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MK 0.00* NY 0.00* OV 0.00* ! ! A total of 99 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 1.17 NY 1.00* ON 1.14 WN 1.28 ! WZ 1.00 YG 1.29 ! ! ! Fit before self-cal, rms=0.142097Jy sigma=1.389973 ! Fit after self-cal, rms=0.126011Jy sigma=0.938248 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Estimated beam: bmin=0.5869 mas, bmaj=0.9003 mas, bpa=2.51 degrees ! Estimated noise=0.620795 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00357932 Jy ! Component: 100 - total flux cleaned = 0.00358423 Jy ! Component: 150 - total flux cleaned = 0.00374551 Jy ! Component: 200 - total flux cleaned = 0.00374678 Jy ! Total flux subtracted in 200 components = 0.00374678 Jy ! Clean residual min=-0.004711 max=0.004692 Jy/beam ! Clean residual mean=0.000025 rms=0.001105 Jy/beam ! Combined flux in latest and established models = 0.479921 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 46 components and 0.479921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125501Jy sigma=0.928322 ! Fit after self-cal, rms=0.125881Jy sigma=0.926801 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125881Jy sigma=0.926801 ! Fit after self-cal, rms=0.126308Jy sigma=0.896592 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Estimated beam: bmin=0.5856 mas, bmaj=0.9024 mas, bpa=2.773 degrees ! Estimated noise=0.622496 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0029626 Jy ! Component: 100 - total flux cleaned = 0.00284686 Jy ! Component: 150 - total flux cleaned = 0.00285064 Jy ! Component: 200 - total flux cleaned = 0.00275552 Jy ! Total flux subtracted in 200 components = 0.00275552 Jy ! Clean residual min=-0.003444 max=0.003338 Jy/beam ! Clean residual mean=-0.000007 rms=0.000770 Jy/beam ! Combined flux in latest and established models = 0.482677 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 50 components and 0.482677 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126101Jy sigma=0.892055 ! Fit after self-cal, rms=0.126099Jy sigma=0.891717 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.67154e-06 Jy ! Component: 100 - total flux cleaned = 4.28265e-06 Jy ! Component: 150 - total flux cleaned = -7.91959e-05 Jy ! Component: 200 - total flux cleaned = -0.000150678 Jy ! Total flux subtracted in 200 components = -0.000150678 Jy ! Clean residual min=-0.003363 max=0.003253 Jy/beam ! Clean residual mean=-0.000002 rms=0.000757 Jy/beam ! Combined flux in latest and established models = 0.482526 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 51 components and 0.482526 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126002Jy sigma=0.889784 ! Fit after self-cal, rms=0.125976Jy sigma=0.889621 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.125976Jy sigma=0.889621 ! Fit after self-cal, rms=0.128146Jy sigma=0.883033 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Estimated beam: bmin=0.585 mas, bmaj=0.9003 mas, bpa=2.997 degrees ! Estimated noise=0.623674 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00210087 Jy ! Component: 100 - total flux cleaned = 0.00232045 Jy ! Component: 150 - total flux cleaned = 0.00238276 Jy ! Component: 200 - total flux cleaned = 0.00238209 Jy ! Total flux subtracted in 200 components = 0.00238209 Jy ! Clean residual min=-0.002641 max=0.003215 Jy/beam ! Clean residual mean=0.000026 rms=0.000626 Jy/beam ! Combined flux in latest and established models = 0.484908 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 53 components and 0.484908 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128068Jy sigma=0.881339 ! Fit after self-cal, rms=0.128082Jy sigma=0.881164 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (1.2, -1.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00252853 Jy ! Component: 100 - total flux cleaned = 0.00243979 Jy ! Component: 150 - total flux cleaned = 0.0022955 Jy ! Component: 200 - total flux cleaned = 0.00210769 Jy ! Total flux subtracted in 200 components = 0.00210769 Jy ! Clean residual min=-0.002782 max=0.002800 Jy/beam ! Clean residual mean=-0.000018 rms=0.000616 Jy/beam ! Combined flux in latest and established models = 0.487016 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 66 components and 0.487016 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127968Jy sigma=0.878800 ! Fit after self-cal, rms=0.127907Jy sigma=0.878534 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127907Jy sigma=0.878534 ! Fit after self-cal, rms=0.127858Jy sigma=0.877860 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Estimated beam: bmin=2.764 mas, bmaj=2.808 mas, bpa=-23.97 degrees ! Estimated noise=0.902256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00247462 Jy ! Component: 100 - total flux cleaned = 0.00273953 Jy ! Component: 150 - total flux cleaned = 0.00285047 Jy ! Component: 200 - total flux cleaned = 0.00291814 Jy ! Total flux subtracted in 200 components = 0.00291814 Jy ! Clean residual min=-0.002856 max=0.002469 Jy/beam ! Clean residual mean=0.000034 rms=0.000698 Jy/beam ! Combined flux in latest and established models = 0.489934 Jy selfcal ! Performing phase self-cal ! Adding 6 model components to the UV plane model. ! The established model now contains 69 components and 0.489934 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127844Jy sigma=0.877176 ! Fit after self-cal, rms=0.127828Jy sigma=0.876949 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 5.95184e-05 Jy ! Component: 100 - total flux cleaned = 8.26123e-05 Jy ! Component: 150 - total flux cleaned = 0.000128194 Jy ! Component: 200 - total flux cleaned = 0.000169037 Jy ! Total flux subtracted in 200 components = 0.000169037 Jy ! Clean residual min=-0.002855 max=0.002508 Jy/beam ! Clean residual mean=0.000024 rms=0.000694 Jy/beam ! Combined flux in latest and established models = 0.490103 Jy ! Performing phase self-cal ! Adding 7 model components to the UV plane model. ! The established model now contains 72 components and 0.490103 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.127824Jy sigma=0.877065 ! Fit after self-cal, rms=0.127804Jy sigma=0.876923 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Estimated beam: bmin=0.585 mas, bmaj=0.9 mas, bpa=3.025 degrees ! Estimated noise=0.624182 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.585 x 0.9 at 3.025 degrees (North through East) ! Clean map min=-0.0086543 max=0.25512 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Estimated beam: bmin=0.525 mas, bmaj=0.8774 mas, bpa=1.021 degrees ! Estimated noise=0.898137 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.232565 Jy ! Component: 100 - total flux cleaned = 0.340279 Jy ! Component: 150 - total flux cleaned = 0.401184 Jy ! Component: 200 - total flux cleaned = 0.439257 Jy ! Total flux subtracted in 200 components = 0.439257 Jy ! Clean residual min=-0.007573 max=0.020344 Jy/beam ! Clean residual mean=0.000024 rms=0.001702 Jy/beam ! Combined flux in latest and established models = 0.439257 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 16 model components to the UV plane model. ! The established model now contains 16 components and 0.439257 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Estimated beam: bmin=0.585 mas, bmaj=0.9 mas, bpa=3.025 degrees ! Estimated noise=0.624182 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0291977 Jy ! Component: 100 - total flux cleaned = 0.0454084 Jy ! Component: 150 - total flux cleaned = 0.0484969 Jy ! Component: 200 - total flux cleaned = 0.0492144 Jy ! Total flux subtracted in 200 components = 0.0492144 Jy ! Clean residual min=-0.005234 max=0.006044 Jy/beam ! Clean residual mean=0.000042 rms=0.000810 Jy/beam ! Combined flux in latest and established models = 0.488471 Jy ! Adding 18 model components to the UV plane model. ! The established model now contains 24 components and 0.488471 Jy ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Added new window around map position (0.6, 0.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000989973 Jy ! Component: 100 - total flux cleaned = 0.00151589 Jy ! Component: 150 - total flux cleaned = 0.00175475 Jy ! Component: 200 - total flux cleaned = 0.00217632 Jy ! Total flux subtracted in 200 components = 0.00217632 Jy ! Clean residual min=-0.003657 max=0.003715 Jy/beam ! Clean residual mean=-0.000003 rms=0.000702 Jy/beam ! Combined flux in latest and established models = 0.490647 Jy ! Adding 17 model components to the UV plane model. ! The established model now contains 31 components and 0.490647 Jy ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Added new window around map position (-1.8, -2.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000625005 Jy ! Component: 100 - total flux cleaned = 0.000804991 Jy ! Component: 150 - total flux cleaned = 0.000962331 Jy ! Component: 200 - total flux cleaned = 0.000966287 Jy ! Total flux subtracted in 200 components = 0.000966287 Jy ! Clean residual min=-0.002950 max=0.003199 Jy/beam ! Clean residual mean=-0.000023 rms=0.000651 Jy/beam ! Combined flux in latest and established models = 0.491614 Jy ! Adding 22 model components to the UV plane model. ! The established model now contains 40 components and 0.491614 Jy ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Added new window around map position (31.8, 4.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00112137 Jy ! Component: 100 - total flux cleaned = 0.00124933 Jy ! Component: 150 - total flux cleaned = 0.00137144 Jy ! Component: 200 - total flux cleaned = 0.00159645 Jy ! Total flux subtracted in 200 components = 0.00159645 Jy ! Clean residual min=-0.002755 max=0.002762 Jy/beam ! Clean residual mean=-0.000057 rms=0.000621 Jy/beam ! Combined flux in latest and established models = 0.49321 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 45 components and 0.49321 Jy ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Added new window around map position (-0.4, -5.4). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00106394 Jy ! Component: 100 - total flux cleaned = 0.00116542 Jy ! Component: 150 - total flux cleaned = 0.00107204 Jy ! Component: 200 - total flux cleaned = 0.00116442 Jy ! Total flux subtracted in 200 components = 0.00116442 Jy ! Clean residual min=-0.002639 max=0.002494 Jy/beam ! Clean residual mean=-0.000080 rms=0.000602 Jy/beam ! Combined flux in latest and established models = 0.494374 Jy ! Adding 30 model components to the UV plane model. ! The established model now contains 54 components and 0.494374 Jy ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Estimated beam: bmin=2.764 mas, bmaj=2.808 mas, bpa=-23.97 degrees ! Estimated noise=0.902256 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000914023 Jy ! Component: 100 - total flux cleaned = -0.00100564 Jy ! Component: 150 - total flux cleaned = -0.00104663 Jy ! Component: 200 - total flux cleaned = -0.00111931 Jy ! Total flux subtracted in 200 components = -0.00111931 Jy ! Clean residual min=-0.002913 max=0.002148 Jy/beam ! Clean residual mean=-0.000166 rms=0.000648 Jy/beam ! Combined flux in latest and established models = 0.493255 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000132421 Jy ! Component: 100 - total flux cleaned = -0.000251672 Jy ! Component: 150 - total flux cleaned = -0.000333433 Jy ! Component: 200 - total flux cleaned = -0.000358704 Jy ! Total flux subtracted in 200 components = -0.000358704 Jy ! Clean residual min=-0.002875 max=0.002170 Jy/beam ! Clean residual mean=-0.000144 rms=0.000642 Jy/beam ! Combined flux in latest and established models = 0.492896 Jy ! Adding 19 model components to the UV plane model. ! The established model now contains 69 components and 0.492896 Jy ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! Estimated beam: bmin=0.585 mas, bmaj=0.9 mas, bpa=3.025 degrees ! Estimated noise=0.624182 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000953363 Jy ! Component: 100 - total flux cleaned = 0.00112716 Jy ! Component: 150 - total flux cleaned = 0.00112945 Jy ! Component: 200 - total flux cleaned = 0.00120339 Jy ! Total flux subtracted in 200 components = 0.00120339 Jy ! Clean residual min=-0.002633 max=0.002412 Jy/beam ! Clean residual mean=-0.000075 rms=0.000587 Jy/beam ! Combined flux in latest and established models = 0.4941 Jy selfcal ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 81 components and 0.4941 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.128016Jy sigma=0.875731 ! Fit after self-cal, rms=0.127630Jy sigma=0.873501 wmodel J1619+2247_X_map.mod ! Writing 81 model components to file: J1619+2247_X_map.mod wobs J1619+2247_X_uvs.fits ! Writing UV FITS file: J1619+2247_X_uvs.fits wwins J1619+2247_X_map.win ! wwins: Wrote 8 windows to J1619+2247_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00100844 Jy ! Component: 100 - total flux cleaned = -0.001644 Jy ! Component: 150 - total flux cleaned = -0.00195084 Jy ! Component: 200 - total flux cleaned = -0.0021653 Jy ! Component: 250 - total flux cleaned = -0.00245858 Jy ! Component: 300 - total flux cleaned = -0.00258146 Jy ! Component: 350 - total flux cleaned = -0.00274338 Jy ! Component: 400 - total flux cleaned = -0.00274381 Jy ! Component: 450 - total flux cleaned = -0.00278356 Jy ! Component: 500 - total flux cleaned = -0.00290025 Jy ! Component: 550 - total flux cleaned = -0.00293839 Jy ! Component: 600 - total flux cleaned = -0.00297625 Jy ! Component: 650 - total flux cleaned = -0.00301371 Jy ! Component: 700 - total flux cleaned = -0.00305078 Jy ! Component: 750 - total flux cleaned = -0.00305062 Jy ! Component: 800 - total flux cleaned = -0.00305059 Jy ! Component: 850 - total flux cleaned = -0.00308657 Jy ! Component: 900 - total flux cleaned = -0.00305081 Jy ! Component: 950 - total flux cleaned = -0.00312178 Jy ! Component: 1000 - total flux cleaned = -0.00308664 Jy ! Component: 1050 - total flux cleaned = -0.0031564 Jy ! Component: 1100 - total flux cleaned = -0.00312177 Jy ! Component: 1150 - total flux cleaned = -0.00312165 Jy ! Component: 1200 - total flux cleaned = -0.00312181 Jy ! Component: 1250 - total flux cleaned = -0.00315568 Jy ! Component: 1300 - total flux cleaned = -0.00315563 Jy ! Component: 1350 - total flux cleaned = -0.00312224 Jy ! Component: 1400 - total flux cleaned = -0.00315551 Jy ! Component: 1450 - total flux cleaned = -0.00318845 Jy ! Component: 1500 - total flux cleaned = -0.00312305 Jy ! Component: 1550 - total flux cleaned = -0.00322105 Jy ! Component: 1600 - total flux cleaned = -0.00322099 Jy ! Component: 1650 - total flux cleaned = -0.00322098 Jy ! Component: 1700 - total flux cleaned = -0.0032529 Jy ! Component: 1750 - total flux cleaned = -0.00322098 Jy ! Component: 1800 - total flux cleaned = -0.00322112 Jy ! Component: 1850 - total flux cleaned = -0.00325267 Jy ! Component: 1900 - total flux cleaned = -0.00325261 Jy ! Component: 1950 - total flux cleaned = -0.00325263 Jy ! Component: 2000 - total flux cleaned = -0.00325259 Jy ! Component: 2050 - total flux cleaned = -0.00325263 Jy ! Component: 2100 - total flux cleaned = -0.00325265 Jy ! Component: 2150 - total flux cleaned = -0.00325267 Jy ! Component: 2200 - total flux cleaned = -0.00322234 Jy ! Component: 2250 - total flux cleaned = -0.00325263 Jy ! Component: 2300 - total flux cleaned = -0.00328262 Jy ! Component: 2350 - total flux cleaned = -0.00322275 Jy ! Component: 2400 - total flux cleaned = -0.00325254 Jy ! Component: 2450 - total flux cleaned = -0.0032525 Jy ! Component: 2500 - total flux cleaned = -0.00325252 Jy ! Component: 2550 - total flux cleaned = -0.00322321 Jy ! Component: 2600 - total flux cleaned = -0.00325248 Jy ! Component: 2650 - total flux cleaned = -0.00325249 Jy ! Component: 2700 - total flux cleaned = -0.00325248 Jy ! Component: 2750 - total flux cleaned = -0.00328129 Jy ! Component: 2800 - total flux cleaned = -0.00325254 Jy ! Component: 2850 - total flux cleaned = -0.00325257 Jy ! Component: 2900 - total flux cleaned = -0.00322407 Jy ! Component: 2950 - total flux cleaned = -0.00328077 Jy ! Component: 3000 - total flux cleaned = -0.00325256 Jy ! Component: 3050 - total flux cleaned = -0.00328063 Jy ! Component: 3100 - total flux cleaned = -0.00328061 Jy ! Component: 3150 - total flux cleaned = -0.00328056 Jy ! Component: 3200 - total flux cleaned = -0.00328051 Jy ! Component: 3250 - total flux cleaned = -0.00330819 Jy ! Component: 3300 - total flux cleaned = -0.00330813 Jy ! Component: 3350 - total flux cleaned = -0.00330807 Jy ! Component: 3400 - total flux cleaned = -0.00325343 Jy ! Component: 3450 - total flux cleaned = -0.00330799 Jy ! Component: 3500 - total flux cleaned = -0.00330797 Jy ! Component: 3550 - total flux cleaned = -0.00333493 Jy ! Component: 3600 - total flux cleaned = -0.00333488 Jy ! Component: 3650 - total flux cleaned = -0.00333486 Jy ! Component: 3700 - total flux cleaned = -0.00330807 Jy ! Component: 3750 - total flux cleaned = -0.00336144 Jy ! Component: 3800 - total flux cleaned = -0.00330833 Jy ! Component: 3850 - total flux cleaned = -0.00333488 Jy ! Component: 3900 - total flux cleaned = -0.00333486 Jy ! Component: 3950 - total flux cleaned = -0.00330857 Jy ! Component: 4000 - total flux cleaned = -0.00336098 Jy ! Component: 4050 - total flux cleaned = -0.00333492 Jy ! Total flux subtracted in 4096 components = -0.00336099 Jy ! Clean residual min=-0.001593 max=0.001540 Jy/beam ! Clean residual mean=-0.000004 rms=0.000418 Jy/beam ! Combined flux in latest and established models = 0.490739 Jy keep ! Adding 341 model components to the UV plane model. ! The established model now contains 420 components and 0.490739 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv123_uvs/J1619+2247_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.585 x 0.9 at 3.025 degrees (North through East) ! Clean map min=-0.0072067 max=0.25321 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv123_uvs/J1619+2247_X_map.fits wmodel /scr/pima/rv123_uvs/J1619+2247_X_map.mod ! Writing 420 model components to file: /scr/pima/rv123_uvs/J1619+2247_X_map.mod wobs /scr/pima/rv123_uvs/J1619+2247_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv123_uvs/J1619+2247_X_uvs.fits wwins /scr/pima/rv123_uvs/J1619+2247_X_map.win ! wwins: Wrote 9 windows to /scr/pima/rv123_uvs/J1619+2247_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.253209 invert ! Inverting map ! Your choice of large map pixels excluded 10.5% of the data. ! The x-axis pixel size should ideally be below 0.1658 milli-arcsec ! The y-axis pixel size should ideally be below 0.1679 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00041682 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.493845 0.493845 0.987691 1.97538 3.95076 7.90153 15.8031 31.6061 63.2122 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0012 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.253 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 607.477 quit ! Quitting program ! Log file /scr/pima/rv123_uvs/J1619+2247_X_dfm.log closed on Sun Dec 23 00:43:43 2018