! Started logfile: /scr/pima/rv123_uvs/J1443+2501_X_dfm.log on Sun Dec 23 00:43:15 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv123_uvs/J1443+2501_X_uva.fits ! Reading UV FITS file: /scr/pima/rv123_uvs/J1443+2501_X_uva.fits ! AN table 1: 14 integrations on 10 of 10 possible baselines. ! AN table 2: 7 integrations on 6 of 6 possible baselines. ! AN table 3: 23 integrations on 55 of 55 possible baselines. ! AN table 4: 8 integrations on 45 of 45 possible baselines. ! AN table 5: 8 integrations on 28 of 28 possible baselines. ! AN table 6: 33 integrations on 10 of 10 possible baselines. ! Apparent sampling: 0.41889 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1443+2501 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 89 lines of history. ! ! Reading 3956 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J1443+2501_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 143 telescope corrections were flagged in sub-array 3. ! A total of 40 telescope corrections were flagged in sub-array 4. ! A total of 34 telescope corrections were flagged in sub-array 5. ! A total of 61 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 143 telescope corrections were flagged in sub-array 3. ! A total of 40 telescope corrections were flagged in sub-array 4. ! A total of 34 telescope corrections were flagged in sub-array 5. ! A total of 61 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 169 telescope corrections were flagged in sub-array 3. ! A total of 40 telescope corrections were flagged in sub-array 4. ! A total of 34 telescope corrections were flagged in sub-array 5. ! A total of 107 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 48 telescope corrections were flagged in sub-array 1. ! A total of 13 telescope corrections were flagged in sub-array 2. ! A total of 169 telescope corrections were flagged in sub-array 3. ! A total of 40 telescope corrections were flagged in sub-array 4. ! A total of 34 telescope corrections were flagged in sub-array 5. ! A total of 107 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.165045Jy sigma=15.755825 ! Fit after self-cal, rms=0.431149Jy sigma=6.269035 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=0.5308 mas, bmaj=1.06 mas, bpa=-4.991 degrees ! Estimated noise=1.23821 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.45408 Jy ! Component: 100 - total flux cleaned = 0.564102 Jy ! Total flux subtracted in 100 components = 0.564102 Jy ! Clean residual min=-0.027091 max=0.044541 Jy/beam ! Clean residual mean=-0.000002 rms=0.005954 Jy/beam ! Combined flux in latest and established models = 0.564102 Jy ! Performing phase self-cal ! Adding 4 model components to the UV plane model. ! The established model now contains 4 components and 0.564102 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.227360Jy sigma=2.530774 ! Fit after self-cal, rms=0.227018Jy sigma=2.526397 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1803 milli-arcsec ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0469525 Jy ! Component: 100 - total flux cleaned = 0.0579988 Jy ! Total flux subtracted in 100 components = 0.0579988 Jy ! Clean residual min=-0.025695 max=0.037888 Jy/beam ! Clean residual mean=0.000002 rms=0.005531 Jy/beam ! Combined flux in latest and established models = 0.622101 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 11 components and 0.622101 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.213378Jy sigma=2.354883 ! Fit after self-cal, rms=0.213346Jy sigma=2.354491 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1803 milli-arcsec ! Added new window around map position (-1.8, 0.6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.031878 Jy ! Component: 100 - total flux cleaned = 0.0384463 Jy ! Total flux subtracted in 100 components = 0.0384463 Jy ! Clean residual min=-0.024443 max=0.032186 Jy/beam ! Clean residual mean=0.000005 rms=0.005310 Jy/beam ! Combined flux in latest and established models = 0.660547 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 22 components and 0.660547 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.208052Jy sigma=2.279808 ! Fit after self-cal, rms=0.207458Jy sigma=2.267558 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1803 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1803 milli-arcsec ! Estimated beam: bmin=0.5902 mas, bmaj=0.9755 mas, bpa=-0.2196 degrees ! Estimated noise=1.06667 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0206754 Jy ! Component: 100 - total flux cleaned = 0.0213492 Jy ! Component: 150 - total flux cleaned = 0.0213419 Jy ! Component: 200 - total flux cleaned = 0.0213597 Jy ! Total flux subtracted in 200 components = 0.0213597 Jy ! Clean residual min=-0.023914 max=0.028378 Jy/beam ! Clean residual mean=0.000023 rms=0.005302 Jy/beam ! Combined flux in latest and established models = 0.681907 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.681907 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.200825Jy sigma=2.217734 ! Fit after self-cal, rms=0.200755Jy sigma=2.215630 ! Inverting map ! Your choice of large map pixels excluded 5.65% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1803 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.5902 x 0.9755 at -0.2196 degrees (North through East) ! Clean map min=-0.020899 max=0.58305 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.70 HN 1.06 NY 0.84 ON 0.94 ! SC 0.90 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MC 0.84 NL 0.96 ON 0.93 SC 0.96 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.98 FD 0.86 HN 1.88 KP 1.00 ! LA 1.01 MC 0.80 NL 1.04 NY 0.76 ! OV 0.95 SC 0.89 WN 1.53 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.00 FD 0.83 HN 1.05 KP 1.05 ! LA 0.97 MC 0.83 NL 0.97 OV 0.93 ! SC 0.90 WZ 0.99 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 0.83 KP 1.06 LA 0.97 ! MK 0.98 OV 0.93 PT 0.84 YG 0.93 ! ! A total of 30 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 0.71 NY 0.76 ON 0.94 WZ 1.08 ! YG 0.97 ! ! ! Correcting IF 2. ! A total of 12 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.68 HN 1.14 NY 1.00 ON 0.91 ! SC 0.85 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MC 0.86 NL 0.89 ON 0.90 SC 1.00 ! ! A total of 12 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.84 HN 1.86 KP 1.00 ! LA 1.03 MC 0.86 NL 1.02 NY 0.92 ! OV 0.95 SC 0.90 WN 1.52 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.82 HN 1.06 KP 1.05 ! LA 0.99 MC 0.89 NL 0.99 OV 0.93 ! SC 0.94 WZ 0.98 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.95 FD 0.85 KP 1.06 LA 0.97 ! MK 0.99 OV 0.93 PT 0.84 YG 0.82 ! ! A total of 30 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 0.70 NY 0.89 ON 0.91 WZ 1.08 ! YG 0.78 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.75 HN 1.09 NY 1.00* ON 1.30 ! SC 0.82 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MC 1.27 NL 0.96 ON 1.26 SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.00 FD 0.83 HN 1.87 KP 1.02 ! LA 1.02 MC 1.19 NL 1.02 NY 1.00* ! OV 0.96 SC 0.89 WN 1.37 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.83 HN 1.03 KP 1.06 ! LA 0.99 MC 1.29 NL 1.00 OV 0.94 ! SC 0.90 WZ 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 0.82 KP 1.09 LA 0.99 ! MK 1.01 OV 0.94 PT 0.84 YG 0.76 ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 0.76 NY 1.00* ON 1.20 WZ 1.17 ! YG 0.83 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! HH 0.79 HN 1.12 NY 1.00* ON 1.35 ! SC 0.89 ! ! A total of 3 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MC 1.24 NL 0.98 ON 1.06 SC 0.95 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.99 FD 0.85 HN 1.92 KP 1.01 ! LA 1.01 MC 1.16 NL 1.00 NY 1.00* ! OV 0.96 SC 0.92 WN 1.25 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.98 FD 0.81 HN 1.03 KP 1.06 ! LA 1.01 MC 1.28 NL 1.00 OV 0.93 ! SC 0.91 WZ 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! BR 0.94 FD 0.85 KP 1.07 LA 0.96 ! MK 0.97 OV 0.92 PT 0.85 YG 0.87 ! ! A total of 18 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 0.93 NY 1.00* ON 1.22 WZ 1.15 ! YG 0.95 ! ! ! Fit before self-cal, rms=0.200755Jy sigma=2.215630 ! Fit after self-cal, rms=0.169755Jy sigma=1.404673 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Estimated beam: bmin=0.5943 mas, bmaj=0.9706 mas, bpa=-1.38 degrees ! Estimated noise=1.08901 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00252151 Jy ! Component: 100 - total flux cleaned = -0.00251189 Jy ! Component: 150 - total flux cleaned = -0.00202943 Jy ! Component: 200 - total flux cleaned = -0.00161845 Jy ! Total flux subtracted in 200 components = -0.00161845 Jy ! Clean residual min=-0.014777 max=0.012861 Jy/beam ! Clean residual mean=0.000003 rms=0.003293 Jy/beam ! Combined flux in latest and established models = 0.680289 Jy ! Performing phase self-cal ! Adding 11 model components to the UV plane model. ! The established model now contains 37 components and 0.680289 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168272Jy sigma=1.390491 ! Fit after self-cal, rms=0.168282Jy sigma=1.388360 ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.168282Jy sigma=1.388360 ! Fit after self-cal, rms=0.300722Jy sigma=1.140174 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Estimated beam: bmin=0.5959 mas, bmaj=0.9648 mas, bpa=-1.281 degrees ! Estimated noise=1.09883 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000424183 Jy ! Component: 100 - total flux cleaned = -0.00155513 Jy ! Component: 150 - total flux cleaned = -0.00221207 Jy ! Component: 200 - total flux cleaned = -0.00324347 Jy ! Total flux subtracted in 200 components = -0.00324347 Jy ! Clean residual min=-0.008989 max=0.008443 Jy/beam ! Clean residual mean=0.000004 rms=0.001895 Jy/beam ! Combined flux in latest and established models = 0.677045 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 43 components and 0.677045 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.299405Jy sigma=1.127175 ! Fit after self-cal, rms=0.299400Jy sigma=1.124651 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0023201 Jy ! Component: 100 - total flux cleaned = -0.00304583 Jy ! Component: 150 - total flux cleaned = -0.00316699 Jy ! Component: 200 - total flux cleaned = -0.00337868 Jy ! Total flux subtracted in 200 components = -0.00337868 Jy ! Clean residual min=-0.009109 max=0.008397 Jy/beam ! Clean residual mean=0.000004 rms=0.001879 Jy/beam ! Combined flux in latest and established models = 0.673667 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 45 components and 0.673667 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298911Jy sigma=1.121556 ! Fit after self-cal, rms=0.298881Jy sigma=1.120908 ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.298881Jy sigma=1.120908 ! Fit after self-cal, rms=0.161145Jy sigma=0.917883 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Estimated beam: bmin=0.5987 mas, bmaj=0.9601 mas, bpa=-1.194 degrees ! Estimated noise=1.09846 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00226331 Jy ! Component: 100 - total flux cleaned = -0.00282069 Jy ! Component: 150 - total flux cleaned = -0.00294282 Jy ! Component: 200 - total flux cleaned = -0.00304298 Jy ! Total flux subtracted in 200 components = -0.00304298 Jy ! Clean residual min=-0.005049 max=0.005767 Jy/beam ! Clean residual mean=0.000002 rms=0.001050 Jy/beam ! Combined flux in latest and established models = 0.670624 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 47 components and 0.670624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160851Jy sigma=0.911955 ! Fit after self-cal, rms=0.160868Jy sigma=0.911460 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.6, -16.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00347099 Jy ! Component: 100 - total flux cleaned = 0.00323888 Jy ! Component: 150 - total flux cleaned = 0.00304778 Jy ! Component: 200 - total flux cleaned = 0.00304621 Jy ! Total flux subtracted in 200 components = 0.00304621 Jy ! Clean residual min=-0.004747 max=0.004645 Jy/beam ! Clean residual mean=0.000002 rms=0.001019 Jy/beam ! Combined flux in latest and established models = 0.67367 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 56 components and 0.67367 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160573Jy sigma=0.906128 ! Fit after self-cal, rms=0.160568Jy sigma=0.905737 ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Added new window around map position (15.8, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00342688 Jy ! Component: 100 - total flux cleaned = 0.00380409 Jy ! Component: 150 - total flux cleaned = 0.00379968 Jy ! Component: 200 - total flux cleaned = 0.00380218 Jy ! Total flux subtracted in 200 components = 0.00380218 Jy ! Clean residual min=-0.004506 max=0.004149 Jy/beam ! Clean residual mean=0.000002 rms=0.000997 Jy/beam ! Combined flux in latest and established models = 0.677472 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 68 components and 0.677472 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160391Jy sigma=0.901837 ! Fit after self-cal, rms=0.160381Jy sigma=0.901518 ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160381Jy sigma=0.901518 ! Fit after self-cal, rms=0.160181Jy sigma=0.898667 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Estimated beam: bmin=2.506 mas, bmaj=2.587 mas, bpa=-54.52 degrees ! Estimated noise=1.46091 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000151225 Jy ! Component: 100 - total flux cleaned = 0.000743481 Jy ! Component: 150 - total flux cleaned = 0.00110101 Jy ! Component: 200 - total flux cleaned = 0.00131384 Jy ! Total flux subtracted in 200 components = 0.00131384 Jy ! Clean residual min=-0.004820 max=0.004334 Jy/beam ! Clean residual mean=0.000002 rms=0.001272 Jy/beam ! Combined flux in latest and established models = 0.678786 Jy selfcal ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 75 components and 0.678786 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160149Jy sigma=0.897789 ! Fit after self-cal, rms=0.160150Jy sigma=0.897341 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -2.16479e-06 Jy ! Component: 100 - total flux cleaned = 0.000238082 Jy ! Component: 150 - total flux cleaned = 0.000406161 Jy ! Component: 200 - total flux cleaned = 0.000372229 Jy ! Total flux subtracted in 200 components = 0.000372229 Jy ! Clean residual min=-0.004833 max=0.004335 Jy/beam ! Clean residual mean=0.000002 rms=0.001267 Jy/beam ! Combined flux in latest and established models = 0.679158 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 79 components and 0.679158 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160133Jy sigma=0.897223 ! Fit after self-cal, rms=0.160127Jy sigma=0.896898 ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Estimated beam: bmin=0.6004 mas, bmaj=0.9566 mas, bpa=-1.057 degrees ! Estimated noise=1.09836 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6004 x 0.9566 at -1.057 degrees (North through East) ! Clean map min=-0.0037211 max=0.58755 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.160127Jy sigma=0.896898 ! Fit after self-cal, rms=0.323495Jy sigma=0.797659 ! Inverting map and beam ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Estimated beam: bmin=0.6006 mas, bmaj=0.9569 mas, bpa=-1.028 degrees ! Estimated noise=1.09745 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000599708 Jy ! Component: 100 - total flux cleaned = -0.000322908 Jy ! Component: 150 - total flux cleaned = -0.000236534 Jy ! Component: 200 - total flux cleaned = -0.000157255 Jy ! Total flux subtracted in 200 components = -0.000157255 Jy ! Clean residual min=-0.003957 max=0.003950 Jy/beam ! Clean residual mean=0.000001 rms=0.000928 Jy/beam ! Combined flux in latest and established models = 0.679001 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 80 components and 0.679001 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323416Jy sigma=0.794617 ! Fit after self-cal, rms=0.323434Jy sigma=0.794504 ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -9.57641e-05 Jy ! Component: 100 - total flux cleaned = -0.000239743 Jy ! Component: 150 - total flux cleaned = -0.000371918 Jy ! Component: 200 - total flux cleaned = -0.000493831 Jy ! Total flux subtracted in 200 components = -0.000493831 Jy ! Clean residual min=-0.003788 max=0.003947 Jy/beam ! Clean residual mean=0.000001 rms=0.000921 Jy/beam ! Combined flux in latest and established models = 0.678507 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 84 components and 0.678507 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323378Jy sigma=0.792940 ! Fit after self-cal, rms=0.323397Jy sigma=0.792876 ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Added new window around map position (2, -16.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00236745 Jy ! Component: 100 - total flux cleaned = 0.0022957 Jy ! Component: 150 - total flux cleaned = 0.00243348 Jy ! Component: 200 - total flux cleaned = 0.00262717 Jy ! Total flux subtracted in 200 components = 0.00262717 Jy ! Clean residual min=-0.003656 max=0.003761 Jy/beam ! Clean residual mean=0.000001 rms=0.000911 Jy/beam ! Combined flux in latest and established models = 0.681134 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 96 components and 0.681134 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323315Jy sigma=0.789570 ! Fit after self-cal, rms=0.323307Jy sigma=0.789399 ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323307Jy sigma=0.789399 ! Fit after self-cal, rms=0.322753Jy sigma=0.788325 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Estimated beam: bmin=0.5418 mas, bmaj=1.006 mas, bpa=-5.002 degrees ! Estimated noise=1.28922 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.45991 Jy ! Component: 100 - total flux cleaned = 0.565379 Jy ! Component: 150 - total flux cleaned = 0.603822 Jy ! Component: 200 - total flux cleaned = 0.625701 Jy ! Total flux subtracted in 200 components = 0.625701 Jy ! Clean residual min=-0.006980 max=0.016087 Jy/beam ! Clean residual mean=-0.000001 rms=0.001507 Jy/beam ! Combined flux in latest and established models = 0.625701 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.625701 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Estimated beam: bmin=0.6016 mas, bmaj=0.9552 mas, bpa=-0.9687 degrees ! Estimated noise=1.0972 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-0.8, 0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0191653 Jy ! Component: 100 - total flux cleaned = 0.0297454 Jy ! Component: 150 - total flux cleaned = 0.0371385 Jy ! Component: 200 - total flux cleaned = 0.0404711 Jy ! Total flux subtracted in 200 components = 0.0404711 Jy ! Clean residual min=-0.004045 max=0.004411 Jy/beam ! Clean residual mean=0.000002 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 0.666172 Jy ! Adding 24 model components to the UV plane model. ! The established model now contains 30 components and 0.666172 Jy ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Added new window around map position (1.8, -11.2). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00301347 Jy ! Component: 100 - total flux cleaned = 0.00521706 Jy ! Component: 150 - total flux cleaned = 0.00700724 Jy ! Component: 200 - total flux cleaned = 0.00890775 Jy ! Total flux subtracted in 200 components = 0.00890775 Jy ! Clean residual min=-0.003861 max=0.003856 Jy/beam ! Clean residual mean=0.000002 rms=0.000934 Jy/beam ! Combined flux in latest and established models = 0.67508 Jy ! Adding 26 model components to the UV plane model. ! The established model now contains 43 components and 0.67508 Jy ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Estimated beam: bmin=2.505 mas, bmaj=2.589 mas, bpa=-55.36 degrees ! Estimated noise=1.45676 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0035449 Jy ! Component: 100 - total flux cleaned = 0.00447953 Jy ! Component: 150 - total flux cleaned = 0.00517773 Jy ! Component: 200 - total flux cleaned = 0.00572082 Jy ! Total flux subtracted in 200 components = 0.00572082 Jy ! Clean residual min=-0.004258 max=0.003831 Jy/beam ! Clean residual mean=0.000003 rms=0.001154 Jy/beam ! Combined flux in latest and established models = 0.680801 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000482021 Jy ! Component: 100 - total flux cleaned = 0.000750143 Jy ! Component: 150 - total flux cleaned = 0.000947131 Jy ! Component: 200 - total flux cleaned = 0.00112862 Jy ! Total flux subtracted in 200 components = 0.00112862 Jy ! Clean residual min=-0.004204 max=0.003704 Jy/beam ! Clean residual mean=0.000003 rms=0.001142 Jy/beam ! Combined flux in latest and established models = 0.681929 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 75 components and 0.681929 Jy ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! Estimated beam: bmin=0.6016 mas, bmaj=0.9552 mas, bpa=-0.9687 degrees ! Estimated noise=1.0972 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00028383 Jy ! Component: 100 - total flux cleaned = 0.000701881 Jy ! Component: 150 - total flux cleaned = 0.00089612 Jy ! Component: 200 - total flux cleaned = 0.00107739 Jy ! Total flux subtracted in 200 components = 0.00107739 Jy ! Clean residual min=-0.003659 max=0.003687 Jy/beam ! Clean residual mean=0.000001 rms=0.000897 Jy/beam ! Combined flux in latest and established models = 0.683007 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 92 components and 0.683007 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.323097Jy sigma=0.790712 ! Fit after self-cal, rms=0.323033Jy sigma=0.786842 wmodel J1443+2501_X_map.mod ! Writing 92 model components to file: J1443+2501_X_map.mod wobs J1443+2501_X_uvs.fits ! Writing UV FITS file: J1443+2501_X_uvs.fits wwins J1443+2501_X_map.win ! wwins: Wrote 7 windows to J1443+2501_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.000798226 Jy ! Component: 100 - total flux cleaned = 0.000930049 Jy ! Component: 150 - total flux cleaned = 0.00112345 Jy ! Component: 200 - total flux cleaned = 0.00118611 Jy ! Component: 250 - total flux cleaned = 0.00142949 Jy ! Component: 300 - total flux cleaned = 0.00148846 Jy ! Component: 350 - total flux cleaned = 0.00166503 Jy ! Component: 400 - total flux cleaned = 0.00160633 Jy ! Component: 450 - total flux cleaned = 0.00160693 Jy ! Component: 500 - total flux cleaned = 0.00149282 Jy ! Component: 550 - total flux cleaned = 0.00149261 Jy ! Component: 600 - total flux cleaned = 0.00160408 Jy ! Component: 650 - total flux cleaned = 0.0016587 Jy ! Component: 700 - total flux cleaned = 0.00176783 Jy ! Component: 750 - total flux cleaned = 0.00160496 Jy ! Component: 800 - total flux cleaned = 0.00171205 Jy ! Component: 850 - total flux cleaned = 0.00160603 Jy ! Component: 900 - total flux cleaned = 0.00186847 Jy ! Component: 950 - total flux cleaned = 0.00191927 Jy ! Component: 1000 - total flux cleaned = 0.0017648 Jy ! Component: 1050 - total flux cleaned = 0.00217472 Jy ! Component: 1100 - total flux cleaned = 0.00207302 Jy ! Component: 1150 - total flux cleaned = 0.00222444 Jy ! Component: 1200 - total flux cleaned = 0.00237457 Jy ! Component: 1250 - total flux cleaned = 0.00227471 Jy ! Component: 1300 - total flux cleaned = 0.00247202 Jy ! Component: 1350 - total flux cleaned = 0.00232506 Jy ! Component: 1400 - total flux cleaned = 0.00256836 Jy ! Component: 1450 - total flux cleaned = 0.00256828 Jy ! Component: 1500 - total flux cleaned = 0.00256826 Jy ! Component: 1550 - total flux cleaned = 0.00261559 Jy ! Component: 1600 - total flux cleaned = 0.00266351 Jy ! Component: 1650 - total flux cleaned = 0.00252241 Jy ! Component: 1700 - total flux cleaned = 0.00256952 Jy ! Component: 1750 - total flux cleaned = 0.00266199 Jy ! Component: 1800 - total flux cleaned = 0.00247727 Jy ! Component: 1850 - total flux cleaned = 0.00256937 Jy ! Component: 1900 - total flux cleaned = 0.00261484 Jy ! Component: 1950 - total flux cleaned = 0.0028419 Jy ! Component: 2000 - total flux cleaned = 0.00252601 Jy ! Component: 2050 - total flux cleaned = 0.0027054 Jy ! Component: 2100 - total flux cleaned = 0.00261632 Jy ! Component: 2150 - total flux cleaned = 0.00270504 Jy ! Component: 2200 - total flux cleaned = 0.00279341 Jy ! Component: 2250 - total flux cleaned = 0.00270549 Jy ! Component: 2300 - total flux cleaned = 0.00274903 Jy ! Component: 2350 - total flux cleaned = 0.00248848 Jy ! Component: 2400 - total flux cleaned = 0.00253192 Jy ! Component: 2450 - total flux cleaned = 0.0024458 Jy ! Component: 2500 - total flux cleaned = 0.00240327 Jy ! Component: 2550 - total flux cleaned = 0.00274394 Jy ! Component: 2600 - total flux cleaned = 0.0025744 Jy ! Component: 2650 - total flux cleaned = 0.00261639 Jy ! Component: 2700 - total flux cleaned = 0.00253286 Jy ! Component: 2750 - total flux cleaned = 0.00236563 Jy ! Component: 2800 - total flux cleaned = 0.00253176 Jy ! Component: 2850 - total flux cleaned = 0.00253177 Jy ! Component: 2900 - total flux cleaned = 0.00244958 Jy ! Component: 2950 - total flux cleaned = 0.0024495 Jy ! Component: 3000 - total flux cleaned = 0.00224592 Jy ! Component: 3050 - total flux cleaned = 0.00228656 Jy ! Component: 3100 - total flux cleaned = 0.00236715 Jy ! Component: 3150 - total flux cleaned = 0.00232732 Jy ! Component: 3200 - total flux cleaned = 0.0022871 Jy ! Component: 3250 - total flux cleaned = 0.00216742 Jy ! Component: 3300 - total flux cleaned = 0.00212764 Jy ! Component: 3350 - total flux cleaned = 0.00196931 Jy ! Component: 3400 - total flux cleaned = 0.00212708 Jy ! Component: 3450 - total flux cleaned = 0.00197036 Jy ! Component: 3500 - total flux cleaned = 0.0020097 Jy ! Component: 3550 - total flux cleaned = 0.00200969 Jy ! Component: 3600 - total flux cleaned = 0.00197082 Jy ! Component: 3650 - total flux cleaned = 0.00220195 Jy ! Component: 3700 - total flux cleaned = 0.00212525 Jy ! Component: 3750 - total flux cleaned = 0.0019721 Jy ! Component: 3800 - total flux cleaned = 0.00216275 Jy ! Component: 3850 - total flux cleaned = 0.00212458 Jy ! Component: 3900 - total flux cleaned = 0.00193564 Jy ! Component: 3950 - total flux cleaned = 0.0020109 Jy ! Component: 4000 - total flux cleaned = 0.00201099 Jy ! Component: 4050 - total flux cleaned = 0.00201097 Jy ! Total flux subtracted in 4096 components = 0.00212241 Jy ! Clean residual min=-0.001943 max=0.001965 Jy/beam ! Clean residual mean=0.000000 rms=0.000613 Jy/beam ! Combined flux in latest and established models = 0.685129 Jy keep ! Adding 357 model components to the UV plane model. ! The established model now contains 449 components and 0.685129 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv123_uvs/J1443+2501_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.6016 x 0.9552 at -0.9687 degrees (North through East) ! Clean map min=-0.0026527 max=0.58632 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv123_uvs/J1443+2501_X_map.fits wmodel /scr/pima/rv123_uvs/J1443+2501_X_map.mod ! Writing 449 model components to file: /scr/pima/rv123_uvs/J1443+2501_X_map.mod wobs /scr/pima/rv123_uvs/J1443+2501_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv123_uvs/J1443+2501_X_uvs.fits wwins /scr/pima/rv123_uvs/J1443+2501_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rv123_uvs/J1443+2501_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.58632 invert ! Inverting map ! Your choice of large map pixels excluded 5% of the data. ! The x-axis pixel size should ideally be below 0.1677 milli-arcsec ! The y-axis pixel size should ideally be below 0.1812 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000611328 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.312796 0.312796 0.625591 1.25118 2.50236 5.00473 10.0095 20.0189 40.0378 80.0757 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.586 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 959.092 quit ! Quitting program ! Log file /scr/pima/rv123_uvs/J1443+2501_X_dfm.log closed on Sun Dec 23 00:43:20 2018