! Started logfile: /scr/pima/rv123_uvs/J1230+1223_S_dfm.log on Sun Dec 23 05:03:38 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv123_uvs/J1230+1223_S_uva.fits ! Reading UV FITS file: /scr/pima/rv123_uvs/J1230+1223_S_uva.fits ! AN table 1: 4 integrations on 15 of 15 possible baselines. ! AN table 2: 6 integrations on 36 of 36 possible baselines. ! AN table 3: 5 integrations on 10 of 10 possible baselines. ! AN table 4: 28 integrations on 36 of 36 possible baselines. ! AN table 5: 89 integrations on 15 of 15 possible baselines. ! AN table 6: 91 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.360744 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J1230+1223 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 89 lines of history. ! ! Reading 7528 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J1230+1223_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 156 telescope corrections were flagged in sub-array 4. ! A total of 330 telescope corrections were flagged in sub-array 5. ! A total of 492 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 156 telescope corrections were flagged in sub-array 4. ! A total of 330 telescope corrections were flagged in sub-array 5. ! A total of 492 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 54 telescope corrections were flagged in sub-array 2. ! A total of 25 telescope corrections were flagged in sub-array 3. ! A total of 252 telescope corrections were flagged in sub-array 4. ! A total of 330 telescope corrections were flagged in sub-array 5. ! A total of 514 telescope corrections were flagged in sub-array 6. ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! A total of 32 telescope corrections were flagged in sub-array 2. ! A total of 156 telescope corrections were flagged in sub-array 4. ! A total of 330 telescope corrections were flagged in sub-array 5. ! A total of 492 telescope corrections were flagged in sub-array 6. ! ! Fit before self-cal, rms=1.630379Jy sigma=11.964941 ! Fit after self-cal, rms=0.850489Jy sigma=5.748310 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.041 mas, bmaj=2.453 mas, bpa=68.07 degrees ! Estimated noise=1.6409 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.544498 Jy ! Component: 100 - total flux cleaned = 0.791017 Jy ! Total flux subtracted in 100 components = 0.791017 Jy ! Clean residual min=-0.052827 max=0.143175 Jy/beam ! Clean residual mean=-0.000107 rms=0.013387 Jy/beam ! Combined flux in latest and established models = 0.791017 Jy ! Performing phase self-cal ! Adding 25 model components to the UV plane model. ! The established model now contains 25 components and 0.791017 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.823471Jy sigma=4.161645 ! Fit after self-cal, rms=0.821756Jy sigma=4.155366 ! Inverting map ! Added new window around map position (-3.5, 1). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.169219 Jy ! Component: 100 - total flux cleaned = 0.288241 Jy ! Total flux subtracted in 100 components = 0.288241 Jy ! Clean residual min=-0.052561 max=0.107504 Jy/beam ! Clean residual mean=-0.000074 rms=0.010875 Jy/beam ! Combined flux in latest and established models = 1.07926 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 40 components and 1.07926 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.706899Jy sigma=3.462435 ! Fit after self-cal, rms=0.706717Jy sigma=3.435708 ! Inverting map ! Added new window around map position (-6.5, 3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.115277 Jy ! Component: 100 - total flux cleaned = 0.195937 Jy ! Total flux subtracted in 100 components = 0.195937 Jy ! Clean residual min=-0.046106 max=0.076641 Jy/beam ! Clean residual mean=-0.000053 rms=0.009459 Jy/beam ! Combined flux in latest and established models = 1.2752 Jy ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 60 components and 1.2752 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.636574Jy sigma=3.078573 ! Fit after self-cal, rms=0.636125Jy sigma=3.051895 ! Inverting map ! Added new window around map position (-19.5, 5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0829948 Jy ! Component: 100 - total flux cleaned = 0.146457 Jy ! Total flux subtracted in 100 components = 0.146457 Jy ! Clean residual min=-0.039256 max=0.046067 Jy/beam ! Clean residual mean=-0.000031 rms=0.008564 Jy/beam ! Combined flux in latest and established models = 1.42165 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 73 components and 1.42165 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.596542Jy sigma=2.839683 ! Fit after self-cal, rms=0.597073Jy sigma=2.826248 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=1.96 mas, bmaj=2.91 mas, bpa=88.45 degrees ! Estimated noise=1.46117 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.11487 Jy ! Component: 100 - total flux cleaned = 0.202074 Jy ! Component: 150 - total flux cleaned = 0.272696 Jy ! Component: 200 - total flux cleaned = 0.330587 Jy ! Total flux subtracted in 200 components = 0.330587 Jy ! Clean residual min=-0.070447 max=0.071212 Jy/beam ! Clean residual mean=0.000130 rms=0.015044 Jy/beam ! Combined flux in latest and established models = 1.75224 Jy ! Performing phase self-cal ! Adding 58 model components to the UV plane model. ! The established model now contains 108 components and 1.75224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.514286Jy sigma=2.607299 ! Fit after self-cal, rms=0.514155Jy sigma=2.577792 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 1.96 x 2.91 at 88.45 degrees (North through East) ! Clean map min=-0.068742 max=0.65735 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.21 HH 1.50 HN 0.88 LA 0.86 ! NL 1.23 SC 0.91 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.27 FD 1.04 HN 0.78 KP 0.84 ! MC 1.31 NL 1.18 OV 0.75 SC 1.08 ! WN 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.83 FD 1.10 KP 1.10 MC 1.31 ! MK 1.11 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.17 FD 1.09 HN 0.90 KP 1.00 ! LA 0.80 MK 1.13 NL 1.08 OV 0.98 ! SC 0.95 ! ! A total of 60 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 1.28 NY 1.62 ON 0.75 WN 1.00* ! WZ 0.86 YG 1.00* ! ! A total of 78 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 1.30 HN 0.89 NL 2.08 NY 1.45 ! ON 0.73 SC 0.77 WN 1.00* WZ 0.83 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.26 HH 0.81 HN 0.86 LA 0.86 ! NL 1.25 SC 0.90 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.16 FD 1.06 HN 0.82 KP 0.89 ! MC 0.97 NL 1.18 OV 0.63 SC 1.09 ! WN 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.14 FD 1.12 KP 1.06 MC 1.12 ! MK 1.09 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.34 FD 1.14 HN 0.90 KP 1.03 ! LA 0.79 MK 1.07 NL 1.26 OV 0.85 ! SC 0.93 ! ! A total of 60 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 1.16 NY 1.38 ON 0.88 WN 1.00* ! WZ 0.75 YG 1.00* ! ! A total of 78 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 1.18 HN 0.89 NL 2.09 NY 1.27 ! ON 0.87 SC 0.76 WN 1.00* WZ 0.81 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! FD 0.00* HH 0.00* HN 0.00* LA 0.00* ! NL 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! MC 0.00* NL 0.00* OV 0.00* SC 0.00* ! WN 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* KP 0.00* MC 0.00* ! MK 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* OV 0.00* ! SC 0.00* ! ! A total of 60 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 1.01 NY 1.37 ON 0.64 WN 1.00* ! WZ 0.79 YG 1.00* ! ! A total of 78 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 1.01 HN 1.00* NL 1.00* NY 1.27 ! ON 0.65 SC 1.00* WN 1.00* WZ 0.84 ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! FD 1.32 HH 1.22 HN 0.88 LA 0.83 ! NL 1.28 SC 0.90 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.07 FD 0.99 HN 0.83 KP 0.96 ! MC 1.11 NL 1.14 OV 0.82 SC 1.09 ! WN 1.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.85 FD 1.07 KP 1.14 MC 1.15 ! MK 1.15 ! ! A total of 24 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 1.21 FD 1.32 HN 0.86 KP 1.03 ! LA 0.89 MK 1.01 NL 0.97 OV 0.90 ! SC 0.92 ! ! A total of 60 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! HH 1.00 NY 1.45 ON 0.73 WN 1.00* ! WZ 0.73 YG 1.00* ! ! A total of 78 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HH 0.94 HN 0.88 NL 2.47 NY 1.41 ! ON 0.71 SC 0.79 WN 1.00* WZ 0.78 ! ! ! Fit before self-cal, rms=0.514155Jy sigma=2.577792 ! Fit after self-cal, rms=0.241069Jy sigma=1.813996 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.036 mas, bmaj=2.834 mas, bpa=89 degrees ! Estimated noise=1.57639 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-23, 8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0526311 Jy ! Component: 100 - total flux cleaned = 0.0851366 Jy ! Component: 150 - total flux cleaned = 0.107209 Jy ! Component: 200 - total flux cleaned = 0.123998 Jy ! Total flux subtracted in 200 components = 0.123998 Jy ! Clean residual min=-0.021427 max=0.030306 Jy/beam ! Clean residual mean=-0.000007 rms=0.005841 Jy/beam ! Combined flux in latest and established models = 1.87624 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 142 components and 1.87624 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.224423Jy sigma=1.699168 ! Fit after self-cal, rms=0.222522Jy sigma=1.679471 ! Inverting map ! Added new window around map position (-12.5, 5.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0304625 Jy ! Component: 100 - total flux cleaned = 0.049538 Jy ! Component: 150 - total flux cleaned = 0.064183 Jy ! Component: 200 - total flux cleaned = 0.0759085 Jy ! Total flux subtracted in 200 components = 0.0759085 Jy ! Clean residual min=-0.020885 max=0.025640 Jy/beam ! Clean residual mean=0.000003 rms=0.005431 Jy/beam ! Combined flux in latest and established models = 1.95215 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 165 components and 1.95215 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.215608Jy sigma=1.639798 ! Fit after self-cal, rms=0.214978Jy sigma=1.634009 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.214978Jy sigma=1.634009 ! Fit after self-cal, rms=0.174128Jy sigma=1.218015 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.038 mas, bmaj=2.826 mas, bpa=88.58 degrees ! Estimated noise=1.57825 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0187801 Jy ! Component: 100 - total flux cleaned = 0.0319065 Jy ! Component: 150 - total flux cleaned = 0.0413839 Jy ! Component: 200 - total flux cleaned = 0.0468796 Jy ! Total flux subtracted in 200 components = 0.0468796 Jy ! Clean residual min=-0.013356 max=0.020440 Jy/beam ! Clean residual mean=-0.000001 rms=0.003188 Jy/beam ! Combined flux in latest and established models = 1.99903 Jy selfcal ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 176 components and 1.99903 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.171062Jy sigma=1.189120 ! Fit after self-cal, rms=0.170750Jy sigma=1.185901 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-30, 11.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0204522 Jy ! Component: 100 - total flux cleaned = 0.0324834 Jy ! Component: 150 - total flux cleaned = 0.0420554 Jy ! Component: 200 - total flux cleaned = 0.0482861 Jy ! Total flux subtracted in 200 components = 0.0482861 Jy ! Clean residual min=-0.010798 max=0.013057 Jy/beam ! Clean residual mean=0.000007 rms=0.002881 Jy/beam ! Combined flux in latest and established models = 2.04731 Jy ! Performing phase self-cal ! Adding 45 model components to the UV plane model. ! The established model now contains 204 components and 2.04731 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.167399Jy sigma=1.155458 ! Fit after self-cal, rms=0.166827Jy sigma=1.150820 ! Inverting map ! Added new window around map position (4, 8.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0125356 Jy ! Component: 100 - total flux cleaned = 0.0207213 Jy ! Component: 150 - total flux cleaned = 0.025561 Jy ! Component: 200 - total flux cleaned = 0.0282855 Jy ! Total flux subtracted in 200 components = 0.0282855 Jy ! Clean residual min=-0.010395 max=0.011956 Jy/beam ! Clean residual mean=0.000013 rms=0.002699 Jy/beam ! Combined flux in latest and established models = 2.0756 Jy ! Performing phase self-cal ! Adding 42 model components to the UV plane model. ! The established model now contains 222 components and 2.0756 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.165205Jy sigma=1.136745 ! Fit after self-cal, rms=0.164971Jy sigma=1.135675 ! Inverting map ! Added new window around map position (-70.5, 26). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.012146 Jy ! Component: 100 - total flux cleaned = 0.0194841 Jy ! Component: 150 - total flux cleaned = 0.0245249 Jy ! Component: 200 - total flux cleaned = 0.0293584 Jy ! Total flux subtracted in 200 components = 0.0293584 Jy ! Clean residual min=-0.010311 max=0.010898 Jy/beam ! Clean residual mean=0.000009 rms=0.002572 Jy/beam ! Combined flux in latest and established models = 2.10496 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 234 components and 2.10496 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163648Jy sigma=1.121291 ! Fit after self-cal, rms=0.163524Jy sigma=1.120152 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.163524Jy sigma=1.120152 ! Fit after self-cal, rms=0.154896Jy sigma=1.045345 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.038 mas, bmaj=2.814 mas, bpa=88.7 degrees ! Estimated noise=1.56866 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00907622 Jy ! Component: 100 - total flux cleaned = 0.0155796 Jy ! Component: 150 - total flux cleaned = 0.0208101 Jy ! Component: 200 - total flux cleaned = 0.0246348 Jy ! Total flux subtracted in 200 components = 0.0246348 Jy ! Clean residual min=-0.009234 max=0.009763 Jy/beam ! Clean residual mean=0.000002 rms=0.002017 Jy/beam ! Combined flux in latest and established models = 2.12959 Jy selfcal ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 251 components and 2.12959 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153985Jy sigma=1.033673 ! Fit after self-cal, rms=0.153936Jy sigma=1.033122 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-14.5, 12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00948202 Jy ! Component: 100 - total flux cleaned = 0.0156694 Jy ! Component: 150 - total flux cleaned = 0.0192303 Jy ! Component: 200 - total flux cleaned = 0.0215232 Jy ! Total flux subtracted in 200 components = 0.0215232 Jy ! Clean residual min=-0.008239 max=0.009820 Jy/beam ! Clean residual mean=0.000005 rms=0.001935 Jy/beam ! Combined flux in latest and established models = 2.15111 Jy ! Performing phase self-cal ! Adding 47 model components to the UV plane model. ! The established model now contains 269 components and 2.15111 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.153058Jy sigma=1.022736 ! Fit after self-cal, rms=0.153018Jy sigma=1.022170 ! Inverting map ! Added new window around map position (-39, 19). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00853856 Jy ! Component: 100 - total flux cleaned = 0.0139028 Jy ! Component: 150 - total flux cleaned = 0.0173774 Jy ! Component: 200 - total flux cleaned = 0.0196957 Jy ! Total flux subtracted in 200 components = 0.0196957 Jy ! Clean residual min=-0.007521 max=0.007515 Jy/beam ! Clean residual mean=0.000006 rms=0.001864 Jy/beam ! Combined flux in latest and established models = 2.17081 Jy ! Performing phase self-cal ! Adding 51 model components to the UV plane model. ! The established model now contains 286 components and 2.17081 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152234Jy sigma=1.014494 ! Fit after self-cal, rms=0.152145Jy sigma=1.013975 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.152145Jy sigma=1.013975 ! Fit after self-cal, rms=0.151557Jy sigma=1.010708 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.095 mas, bmaj=9.07 mas, bpa=-38.29 degrees ! Estimated noise=2.42102 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.013722 Jy ! Component: 100 - total flux cleaned = 0.0239275 Jy ! Component: 150 - total flux cleaned = 0.0320149 Jy ! Component: 200 - total flux cleaned = 0.0386946 Jy ! Total flux subtracted in 200 components = 0.0386946 Jy ! Clean residual min=-0.011139 max=0.012297 Jy/beam ! Clean residual mean=0.000015 rms=0.003079 Jy/beam ! Combined flux in latest and established models = 2.2095 Jy selfcal ! Performing phase self-cal ! Adding 34 model components to the UV plane model. ! The established model now contains 310 components and 2.2095 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.151126Jy sigma=1.003997 ! Fit after self-cal, rms=0.150909Jy sigma=1.002749 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00734869 Jy ! Component: 100 - total flux cleaned = 0.0132413 Jy ! Component: 150 - total flux cleaned = 0.0176533 Jy ! Component: 200 - total flux cleaned = 0.0210887 Jy ! Total flux subtracted in 200 components = 0.0210887 Jy ! Clean residual min=-0.011854 max=0.012407 Jy/beam ! Clean residual mean=0.000019 rms=0.003011 Jy/beam ! Combined flux in latest and established models = 2.23059 Jy ! Performing phase self-cal ! Adding 38 model components to the UV plane model. ! The established model now contains 325 components and 2.23059 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150841Jy sigma=1.001154 ! Fit after self-cal, rms=0.150752Jy sigma=1.000832 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.038 mas, bmaj=2.807 mas, bpa=88.64 degrees ! Estimated noise=1.56373 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.038 x 2.807 at 88.64 degrees (North through East) ! Clean map min=-0.0067588 max=0.62489 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.150752Jy sigma=1.000832 ! Fit after self-cal, rms=0.133606Jy sigma=0.802284 ! Inverting map and beam ! Estimated beam: bmin=2.037 mas, bmaj=2.81 mas, bpa=88.72 degrees ! Estimated noise=1.56602 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00581137 Jy ! Component: 100 - total flux cleaned = 0.00836456 Jy ! Component: 150 - total flux cleaned = 0.0101533 Jy ! Component: 200 - total flux cleaned = 0.0116492 Jy ! Total flux subtracted in 200 components = 0.0116492 Jy ! Clean residual min=-0.007397 max=0.007557 Jy/beam ! Clean residual mean=0.000003 rms=0.001695 Jy/beam ! Combined flux in latest and established models = 2.24224 Jy ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 333 components and 2.24224 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.133136Jy sigma=0.795620 ! Fit after self-cal, rms=0.133083Jy sigma=0.795359 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00260634 Jy ! Component: 100 - total flux cleaned = 0.00370488 Jy ! Component: 150 - total flux cleaned = 0.00488718 Jy ! Component: 200 - total flux cleaned = 0.00558638 Jy ! Total flux subtracted in 200 components = 0.00558638 Jy ! Clean residual min=-0.007250 max=0.007333 Jy/beam ! Clean residual mean=0.000004 rms=0.001669 Jy/beam ! Combined flux in latest and established models = 2.24783 Jy ! Performing phase self-cal ! Adding 36 model components to the UV plane model. ! The established model now contains 339 components and 2.24783 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132813Jy sigma=0.790988 ! Fit after self-cal, rms=0.132795Jy sigma=0.790845 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.132795Jy sigma=0.790845 ! Fit after self-cal, rms=0.132736Jy sigma=0.790165 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.091 mas, bmaj=2.43 mas, bpa=53.84 degrees ! Estimated noise=1.75286 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.534904 Jy ! Component: 100 - total flux cleaned = 0.790887 Jy ! Component: 150 - total flux cleaned = 0.970001 Jy ! Component: 200 - total flux cleaned = 1.10445 Jy ! Total flux subtracted in 200 components = 1.10445 Jy ! Clean residual min=-0.039488 max=0.081123 Jy/beam ! Clean residual mean=-0.000142 rms=0.008889 Jy/beam ! Combined flux in latest and established models = 1.10445 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 62 model components to the UV plane model. ! The established model now contains 62 components and 1.10445 Jy ! Inverting map and beam ! Estimated beam: bmin=2.037 mas, bmaj=2.81 mas, bpa=88.64 degrees ! Estimated noise=1.56475 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.160924 Jy ! Component: 100 - total flux cleaned = 0.28472 Jy ! Component: 150 - total flux cleaned = 0.384673 Jy ! Component: 200 - total flux cleaned = 0.466902 Jy ! Total flux subtracted in 200 components = 0.466902 Jy ! Clean residual min=-0.028503 max=0.050292 Jy/beam ! Clean residual mean=-0.000077 rms=0.007422 Jy/beam ! Combined flux in latest and established models = 1.57136 Jy ! Adding 70 model components to the UV plane model. ! The established model now contains 104 components and 1.57136 Jy ! Inverting map ! Added new window around map position (-6.5, 1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0690844 Jy ! Component: 100 - total flux cleaned = 0.127573 Jy ! Component: 150 - total flux cleaned = 0.177689 Jy ! Component: 200 - total flux cleaned = 0.221046 Jy ! Total flux subtracted in 200 components = 0.221046 Jy ! Clean residual min=-0.018734 max=0.028248 Jy/beam ! Clean residual mean=-0.000045 rms=0.004682 Jy/beam ! Combined flux in latest and established models = 1.7924 Jy ! Adding 80 model components to the UV plane model. ! The established model now contains 152 components and 1.7924 Jy ! Inverting map ! Added new window around map position (3, -1.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0378983 Jy ! Component: 100 - total flux cleaned = 0.0710358 Jy ! Component: 150 - total flux cleaned = 0.100292 Jy ! Component: 200 - total flux cleaned = 0.126332 Jy ! Total flux subtracted in 200 components = 0.126332 Jy ! Clean residual min=-0.013934 max=0.016685 Jy/beam ! Clean residual mean=-0.000028 rms=0.003396 Jy/beam ! Combined flux in latest and established models = 1.91873 Jy ! Adding 72 model components to the UV plane model. ! The established model now contains 193 components and 1.91873 Jy ! Inverting map ! Added new window around map position (-18, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0233572 Jy ! Component: 100 - total flux cleaned = 0.0444972 Jy ! Component: 150 - total flux cleaned = 0.0637543 Jy ! Component: 200 - total flux cleaned = 0.0813924 Jy ! Total flux subtracted in 200 components = 0.0813924 Jy ! Clean residual min=-0.011156 max=0.012662 Jy/beam ! Clean residual mean=-0.000020 rms=0.002723 Jy/beam ! Combined flux in latest and established models = 2.00013 Jy ! Adding 76 model components to the UV plane model. ! The established model now contains 234 components and 2.00013 Jy ! Inverting map ! Added new window around map position (-20.5, 12.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0164983 Jy ! Component: 100 - total flux cleaned = 0.0317222 Jy ! Component: 150 - total flux cleaned = 0.0459061 Jy ! Component: 200 - total flux cleaned = 0.0591811 Jy ! Total flux subtracted in 200 components = 0.0591811 Jy ! Clean residual min=-0.009442 max=0.010115 Jy/beam ! Clean residual mean=-0.000015 rms=0.002311 Jy/beam ! Combined flux in latest and established models = 2.05931 Jy ! Adding 77 model components to the UV plane model. ! The established model now contains 273 components and 2.05931 Jy ! Inverting map ! Added new window around map position (0.5, -29). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126745 Jy ! Component: 100 - total flux cleaned = 0.0244095 Jy ! Component: 150 - total flux cleaned = 0.03543 Jy ! Component: 200 - total flux cleaned = 0.0458007 Jy ! Total flux subtracted in 200 components = 0.0458007 Jy ! Clean residual min=-0.008171 max=0.008449 Jy/beam ! Clean residual mean=-0.000011 rms=0.002030 Jy/beam ! Combined flux in latest and established models = 2.10511 Jy ! Adding 81 model components to the UV plane model. ! The established model now contains 305 components and 2.10511 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=8.101 mas, bmaj=9.072 mas, bpa=-37.73 degrees ! Estimated noise=2.42069 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0246028 Jy ! Component: 100 - total flux cleaned = 0.0444696 Jy ! Component: 150 - total flux cleaned = 0.0612854 Jy ! Component: 200 - total flux cleaned = 0.0757482 Jy ! Total flux subtracted in 200 components = 0.0757482 Jy ! Clean residual min=-0.011898 max=0.012393 Jy/beam ! Clean residual mean=-0.000013 rms=0.003384 Jy/beam ! Combined flux in latest and established models = 2.18086 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0126264 Jy ! Component: 100 - total flux cleaned = 0.0237771 Jy ! Component: 150 - total flux cleaned = 0.0336604 Jy ! Component: 200 - total flux cleaned = 0.0424443 Jy ! Total flux subtracted in 200 components = 0.0424443 Jy ! Clean residual min=-0.010758 max=0.011011 Jy/beam ! Clean residual mean=-0.000002 rms=0.002919 Jy/beam ! Combined flux in latest and established models = 2.2233 Jy ! Adding 155 model components to the UV plane model. ! The established model now contains 413 components and 2.2233 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.037 mas, bmaj=2.81 mas, bpa=88.64 degrees ! Estimated noise=1.56475 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00701773 Jy ! Component: 100 - total flux cleaned = 0.0122034 Jy ! Component: 150 - total flux cleaned = 0.0167888 Jy ! Component: 200 - total flux cleaned = 0.0209275 Jy ! Total flux subtracted in 200 components = 0.0209275 Jy ! Clean residual min=-0.006795 max=0.007674 Jy/beam ! Clean residual mean=-0.000001 rms=0.001602 Jy/beam ! Combined flux in latest and established models = 2.24423 Jy selfcal ! Performing phase self-cal ! Adding 28 model components to the UV plane model. ! The established model now contains 432 components and 2.24423 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.131652Jy sigma=0.771986 ! Fit after self-cal, rms=0.131333Jy sigma=0.765712 wmodel J1230+1223_S_map.mod ! Writing 432 model components to file: J1230+1223_S_map.mod wobs J1230+1223_S_uvs.fits ! Writing UV FITS file: J1230+1223_S_uvs.fits wwins J1230+1223_S_map.win ! wwins: Wrote 16 windows to J1230+1223_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = 0.00276245 Jy ! Component: 100 - total flux cleaned = 0.00277084 Jy ! Component: 150 - total flux cleaned = 0.00208885 Jy ! Component: 200 - total flux cleaned = 0.00142756 Jy ! Component: 250 - total flux cleaned = 0.000999031 Jy ! Component: 300 - total flux cleaned = 0.000475179 Jy ! Component: 350 - total flux cleaned = -0.000139885 Jy ! Component: 400 - total flux cleaned = -0.000543982 Jy ! Component: 450 - total flux cleaned = -0.0015302 Jy ! Component: 500 - total flux cleaned = -0.00182052 Jy ! Component: 550 - total flux cleaned = -0.00248873 Jy ! Component: 600 - total flux cleaned = -0.00286478 Jy ! Component: 650 - total flux cleaned = -0.00314298 Jy ! Component: 700 - total flux cleaned = -0.00360127 Jy ! Component: 750 - total flux cleaned = -0.00396398 Jy ! Component: 800 - total flux cleaned = -0.00414259 Jy ! Component: 850 - total flux cleaned = -0.00484985 Jy ! Component: 900 - total flux cleaned = -0.00493684 Jy ! Component: 950 - total flux cleaned = -0.0053685 Jy ! Component: 1000 - total flux cleaned = -0.00528471 Jy ! Component: 1050 - total flux cleaned = -0.00587698 Jy ! Component: 1100 - total flux cleaned = -0.00587669 Jy ! Component: 1150 - total flux cleaned = -0.00612679 Jy ! Component: 1200 - total flux cleaned = -0.00637204 Jy ! Component: 1250 - total flux cleaned = -0.0066978 Jy ! Component: 1300 - total flux cleaned = -0.00661743 Jy ! Component: 1350 - total flux cleaned = -0.00677724 Jy ! Component: 1400 - total flux cleaned = -0.00717348 Jy ! Component: 1450 - total flux cleaned = -0.00725093 Jy ! Component: 1500 - total flux cleaned = -0.00709475 Jy ! Component: 1550 - total flux cleaned = -0.00740361 Jy ! Component: 1600 - total flux cleaned = -0.00724976 Jy ! Component: 1650 - total flux cleaned = -0.00717312 Jy ! Component: 1700 - total flux cleaned = -0.00702146 Jy ! Component: 1750 - total flux cleaned = -0.00694697 Jy ! Component: 1800 - total flux cleaned = -0.00717017 Jy ! Component: 1850 - total flux cleaned = -0.00687413 Jy ! Component: 1900 - total flux cleaned = -0.0068748 Jy ! Component: 1950 - total flux cleaned = -0.00694765 Jy ! Component: 2000 - total flux cleaned = -0.00673126 Jy ! Component: 2050 - total flux cleaned = -0.00687502 Jy ! Component: 2100 - total flux cleaned = -0.00687549 Jy ! Component: 2150 - total flux cleaned = -0.00673423 Jy ! Component: 2200 - total flux cleaned = -0.00694427 Jy ! Component: 2250 - total flux cleaned = -0.00652507 Jy ! Component: 2300 - total flux cleaned = -0.00645511 Jy ! Component: 2350 - total flux cleaned = -0.0063867 Jy ! Component: 2400 - total flux cleaned = -0.00638709 Jy ! Component: 2450 - total flux cleaned = -0.00638699 Jy ! Component: 2500 - total flux cleaned = -0.00645489 Jy ! Component: 2550 - total flux cleaned = -0.00638737 Jy ! Component: 2600 - total flux cleaned = -0.00638737 Jy ! Component: 2650 - total flux cleaned = -0.00678624 Jy ! Component: 2700 - total flux cleaned = -0.00685231 Jy ! Component: 2750 - total flux cleaned = -0.00665525 Jy ! Component: 2800 - total flux cleaned = -0.00639497 Jy ! Component: 2850 - total flux cleaned = -0.0067847 Jy ! Component: 2900 - total flux cleaned = -0.00684909 Jy ! Component: 2950 - total flux cleaned = -0.0071054 Jy ! Component: 3000 - total flux cleaned = -0.00691425 Jy ! Component: 3050 - total flux cleaned = -0.00704161 Jy ! Component: 3100 - total flux cleaned = -0.00697913 Jy ! Component: 3150 - total flux cleaned = -0.00741736 Jy ! Component: 3200 - total flux cleaned = -0.00729281 Jy ! Component: 3250 - total flux cleaned = -0.00766481 Jy ! Component: 3300 - total flux cleaned = -0.00754134 Jy ! Component: 3350 - total flux cleaned = -0.00754184 Jy ! Component: 3400 - total flux cleaned = -0.00790775 Jy ! Component: 3450 - total flux cleaned = -0.00790761 Jy ! Component: 3500 - total flux cleaned = -0.00814879 Jy ! Component: 3550 - total flux cleaned = -0.00808821 Jy ! Component: 3600 - total flux cleaned = -0.0080884 Jy ! Component: 3650 - total flux cleaned = -0.00808889 Jy ! Component: 3700 - total flux cleaned = -0.00838392 Jy ! Component: 3750 - total flux cleaned = -0.00838399 Jy ! Component: 3800 - total flux cleaned = -0.00826734 Jy ! Component: 3850 - total flux cleaned = -0.00826691 Jy ! Component: 3900 - total flux cleaned = -0.00832524 Jy ! Component: 3950 - total flux cleaned = -0.00815276 Jy ! Component: 4000 - total flux cleaned = -0.00838223 Jy ! Component: 4050 - total flux cleaned = -0.0085534 Jy ! Total flux subtracted in 4096 components = -0.00855304 Jy ! Clean residual min=-0.003151 max=0.002934 Jy/beam ! Clean residual mean=-0.000005 rms=0.001005 Jy/beam ! Combined flux in latest and established models = 2.23568 Jy keep ! Adding 342 model components to the UV plane model. ! The established model now contains 774 components and 2.23568 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv123_uvs/J1230+1223_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.037 x 2.81 at 88.64 degrees (North through East) ! Clean map min=-0.0047444 max=0.63245 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv123_uvs/J1230+1223_S_map.fits wmodel /scr/pima/rv123_uvs/J1230+1223_S_map.mod ! Writing 774 model components to file: /scr/pima/rv123_uvs/J1230+1223_S_map.mod wobs /scr/pima/rv123_uvs/J1230+1223_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv123_uvs/J1230+1223_S_uvs.fits wwins /scr/pima/rv123_uvs/J1230+1223_S_map.win ! wwins: Wrote 17 windows to /scr/pima/rv123_uvs/J1230+1223_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.63245 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00100154 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.475076 0.475076 0.950152 1.9003 3.80061 7.60122 15.2024 30.4049 60.8097 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.003 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.632 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 631.477 quit ! Quitting program ! Log file /scr/pima/rv123_uvs/J1230+1223_S_dfm.log closed on Sun Dec 23 05:03:43 2018