! Started logfile: /scr/pima/rv123_uvs/J0958+6533_S_dfm.log on Sun Dec 23 05:02:56 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv123_uvs/J0958+6533_S_uva.fits ! Reading UV FITS file: /scr/pima/rv123_uvs/J0958+6533_S_uva.fits ! AN table 1: 3 integrations on 45 of 45 possible baselines. ! AN table 2: 4 integrations on 6 of 6 possible baselines. ! AN table 3: 8 integrations on 45 of 45 possible baselines. ! AN table 4: 22 integrations on 6 of 6 possible baselines. ! AN table 5: 3 integrations on 21 of 21 possible baselines. ! AN table 6: 6 integrations on 15 of 15 possible baselines. ! AN table 7: 5 integrations on 21 of 21 possible baselines. ! AN table 8: 13 integrations on 55 of 55 possible baselines. ! AN table 9: 8 integrations on 28 of 28 possible baselines. ! AN table 10: 4 integrations on 15 of 15 possible baselines. ! Apparent sampling: 0.708595 visibilities/baseline/integration-bin. ! Found source: J0958+6533 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 89 lines of history. ! ! Reading 5408 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0958+6533_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 6. ! A total of 17 telescope corrections were flagged in sub-array 7. ! A total of 91 telescope corrections were flagged in sub-array 8. ! A total of 36 telescope corrections were flagged in sub-array 9. ! A total of 14 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 2. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 6. ! A total of 17 telescope corrections were flagged in sub-array 7. ! A total of 91 telescope corrections were flagged in sub-array 8. ! A total of 36 telescope corrections were flagged in sub-array 9. ! A total of 14 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 3. ! A total of 24 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 80 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 21 telescope corrections were flagged in sub-array 5. ! A total of 30 telescope corrections were flagged in sub-array 6. ! A total of 35 telescope corrections were flagged in sub-array 7. ! A total of 137 telescope corrections were flagged in sub-array 8. ! A total of 64 telescope corrections were flagged in sub-array 9. ! A total of 24 telescope corrections were flagged in sub-array 10. ! ! Correcting IF 4. ! A total of 10 telescope corrections were flagged in sub-array 1. ! A total of 2 telescope corrections were flagged in sub-array 2. ! A total of 10 telescope corrections were flagged in sub-array 3. ! A total of 2 telescope corrections were flagged in sub-array 4. ! A total of 9 telescope corrections were flagged in sub-array 5. ! A total of 20 telescope corrections were flagged in sub-array 6. ! A total of 17 telescope corrections were flagged in sub-array 7. ! A total of 91 telescope corrections were flagged in sub-array 8. ! A total of 36 telescope corrections were flagged in sub-array 9. ! A total of 14 telescope corrections were flagged in sub-array 10. ! ! Fit before self-cal, rms=1.343351Jy sigma=16.525942 ! Fit after self-cal, rms=0.298474Jy sigma=3.651777 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.399 mas, bmaj=3.598 mas, bpa=-12.51 degrees ! Estimated noise=1.46897 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.57782 Jy ! Component: 100 - total flux cleaned = 0.714431 Jy ! Total flux subtracted in 100 components = 0.714431 Jy ! Clean residual min=-0.026347 max=0.059577 Jy/beam ! Clean residual mean=-0.000141 rms=0.007241 Jy/beam ! Combined flux in latest and established models = 0.71443 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.71443 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.241380Jy sigma=2.710276 ! Fit after self-cal, rms=0.241355Jy sigma=2.710005 ! Inverting map ! Added new window around map position (0.5, -4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0664108 Jy ! Component: 100 - total flux cleaned = 0.106131 Jy ! Total flux subtracted in 100 components = 0.106131 Jy ! Clean residual min=-0.024893 max=0.041537 Jy/beam ! Clean residual mean=-0.000084 rms=0.006276 Jy/beam ! Combined flux in latest and established models = 0.820561 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 15 components and 0.820561 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.210608Jy sigma=2.308318 ! Fit after self-cal, rms=0.210452Jy sigma=2.306220 ! Inverting map ! Added new window around map position (-7, -3.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0367924 Jy ! Component: 100 - total flux cleaned = 0.0541574 Jy ! Total flux subtracted in 100 components = 0.0541574 Jy ! Clean residual min=-0.024815 max=0.037317 Jy/beam ! Clean residual mean=-0.000053 rms=0.005893 Jy/beam ! Combined flux in latest and established models = 0.874719 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 25 components and 0.874719 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.199828Jy sigma=2.182635 ! Fit after self-cal, rms=0.199122Jy sigma=2.173994 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.025 mas, bmaj=4.234 mas, bpa=-12.87 degrees ! Estimated noise=1.13787 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0331784 Jy ! Component: 100 - total flux cleaned = 0.0497427 Jy ! Component: 150 - total flux cleaned = 0.05586 Jy ! Component: 200 - total flux cleaned = 0.0605609 Jy ! Total flux subtracted in 200 components = 0.0605609 Jy ! Clean residual min=-0.024493 max=0.029368 Jy/beam ! Clean residual mean=0.000007 rms=0.006267 Jy/beam ! Combined flux in latest and established models = 0.93528 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 35 components and 0.93528 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.190918Jy sigma=2.091693 ! Fit after self-cal, rms=0.190529Jy sigma=2.085145 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.025 x 4.234 at -12.87 degrees (North through East) ! Clean map min=-0.024209 max=0.73991 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 1.07 KP 0.95 LA 0.94 ! MC 1.02 MK 1.01 NL 1.08 NY 1.32 ! OV 0.94 PT 1.07 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MC 1.16 MK 0.77 NY 1.65 ON 0.80 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.08 HN 0.91 KP 0.96 ! LA 0.94 MK 1.05 NL 1.03 ON 0.86 ! OV 0.94 SC 0.93 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MC 1.11 NY 1.40 ON 0.81 WZ 0.95 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.12 FD 1.11 KP 0.96 MK 0.94 ! NY 1.41 OV 0.91 WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 0.87 MC 1.01 NL 1.09 NY 1.50 ! WN 1.00* WZ 1.04 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.12 HN 0.82 KP 0.98 LA 0.92 ! NL 1.17 PT 1.09 WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.20 HN 0.83 KP 0.93 LA 0.92 ! NL 1.07 NY 1.34 ON 0.82 OV 0.93 ! PT 1.06 WN 1.00* WZ 1.01 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.11 FD 1.08 KP 0.99 LA 0.93 ! NL 1.08 OV 0.91 PT 1.05 WN 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 0.86 NL 1.10 NY 1.42 SC 0.83 ! WN 1.00* WZ 0.85 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.07 FD 1.11 KP 0.95 LA 0.95 ! MC 0.86 MK 0.99 NL 1.10 NY 1.14 ! OV 0.69 PT 1.07 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MC 1.05 MK 0.78 NY 1.29 ON 0.97 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.04 FD 1.08 HN 0.92 KP 0.95 ! LA 0.95 MK 1.05 NL 1.03 ON 1.04 ! OV 0.74 SC 0.91 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MC 0.99 NY 1.23 ON 0.96 WZ 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.69 FD 1.09 KP 0.95 MK 0.94 ! NY 1.19 OV 0.75 WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 0.84 MC 0.89 NL 1.12 NY 1.38 ! WN 1.00* WZ 0.88 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.11 HN 0.86 KP 0.90 LA 0.93 ! NL 1.17 PT 1.06 WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.15 HN 0.85 KP 0.95 LA 0.92 ! NL 1.06 NY 1.17 ON 0.99 OV 0.72 ! PT 1.03 WN 1.00* WZ 0.96 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.07 FD 1.07 KP 1.21 LA 0.92 ! NL 1.06 OV 0.72 PT 1.04 WN 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 0.87 NL 1.10 NY 1.25 SC 0.81 ! WN 1.00* WZ 0.79 ! ! ! Correcting IF 3. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* FD 0.00* KP 0.00* LA 0.00* ! MC 0.00* MK 0.00* NL 0.00* NY 0.00* ! OV 0.00* PT 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MC 1.34 MK 1.86 NY 1.29 ON 0.73 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* SC 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MC 1.23 NY 1.23 ON 0.72 WZ 0.95 ! ! Telescope amplitude corrections in sub-array 5: ! BR 0.00* FD 0.00* KP 0.00* MK 0.00* ! NY 0.00* OV 0.00* WN 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 0.00* MC 0.00* NL 0.00* NY 0.00* ! WN 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 7: ! FD 0.00* HN 0.00* KP 0.00* LA 0.00* ! NL 0.00* PT 0.00* WN 0.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* HN 0.00* KP 0.00* LA 0.00* ! NL 0.00* NY 0.00* ON 0.00* OV 0.00* ! PT 0.00* WN 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 9: ! BR 0.00* FD 0.00* KP 0.00* LA 0.00* ! NL 0.00* OV 0.00* PT 0.00* WN 0.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 0.00* NL 0.00* NY 0.00* SC 0.00* ! WN 0.00* WZ 0.00* ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.10 FD 1.07 KP 0.96 LA 0.95 ! MC 1.11 MK 1.06 NL 1.13 NY 1.25 ! OV 0.91 PT 1.07 ! ! A total of 6 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! MC 1.17 MK 0.74 NY 1.62 ON 0.71 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.06 FD 1.08 HN 0.92 KP 0.97 ! LA 0.95 MK 1.08 NL 1.06 ON 0.86 ! OV 0.92 SC 0.95 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! MC 1.23 NY 1.36 ON 0.80 WZ 0.90 ! ! Telescope amplitude corrections in sub-array 5: ! BR 1.12 FD 1.03 KP 0.94 MK 1.02 ! NY 1.29 OV 0.90 WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! HN 0.85 MC 1.15 NL 1.23 NY 1.47 ! WN 1.00* WZ 0.76 ! ! A total of 6 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! FD 1.12 HN 0.85 KP 0.97 LA 0.91 ! NL 1.19 PT 1.07 WN 1.00* ! ! A total of 6 telescope corrections were flagged in sub-array 8. ! Telescope amplitude corrections in sub-array 8: ! BR 1.17 HN 0.87 KP 0.96 LA 0.94 ! NL 1.11 NY 1.30 ON 0.83 OV 0.90 ! PT 1.04 WN 1.00* WZ 1.00 ! ! Telescope amplitude corrections in sub-array 9: ! BR 1.06 FD 1.06 KP 1.15 LA 0.93 ! NL 1.13 OV 0.94 PT 1.07 WN 1.00* ! ! Telescope amplitude corrections in sub-array 10: ! HN 0.82 NL 1.19 NY 1.38 SC 0.87 ! WN 1.00* WZ 0.65 ! ! ! Fit before self-cal, rms=0.190529Jy sigma=2.085145 ! Fit after self-cal, rms=0.113379Jy sigma=1.074423 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=3.047 mas, bmaj=4.206 mas, bpa=-14.9 degrees ! Estimated noise=1.15024 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0120476 Jy ! Component: 100 - total flux cleaned = -0.0132747 Jy ! Component: 150 - total flux cleaned = -0.0140415 Jy ! Component: 200 - total flux cleaned = -0.0147294 Jy ! Total flux subtracted in 200 components = -0.0147294 Jy ! Clean residual min=-0.007860 max=0.008095 Jy/beam ! Clean residual mean=0.000008 rms=0.001866 Jy/beam ! Combined flux in latest and established models = 0.920551 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 45 components and 0.920551 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111684Jy sigma=1.048358 ! Fit after self-cal, rms=0.111444Jy sigma=1.045026 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.111444Jy sigma=1.045026 ! Fit after self-cal, rms=0.103951Jy sigma=0.944016 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=4.203 mas, bpa=-14.86 degrees ! Estimated noise=1.14728 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0067695 Jy ! Component: 100 - total flux cleaned = -0.00720545 Jy ! Component: 150 - total flux cleaned = -0.00778494 Jy ! Component: 200 - total flux cleaned = -0.00813004 Jy ! Total flux subtracted in 200 components = -0.00813004 Jy ! Clean residual min=-0.005612 max=0.006776 Jy/beam ! Clean residual mean=-0.000006 rms=0.001396 Jy/beam ! Combined flux in latest and established models = 0.912421 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.912421 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.103031Jy sigma=0.929052 ! Fit after self-cal, rms=0.102969Jy sigma=0.927973 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (-3.5, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00362066 Jy ! Component: 100 - total flux cleaned = 0.00341083 Jy ! Component: 150 - total flux cleaned = 0.00304018 Jy ! Component: 200 - total flux cleaned = 0.00272815 Jy ! Total flux subtracted in 200 components = 0.00272815 Jy ! Clean residual min=-0.005256 max=0.005808 Jy/beam ! Clean residual mean=-0.000003 rms=0.001301 Jy/beam ! Combined flux in latest and established models = 0.915149 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 65 components and 0.915149 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.102269Jy sigma=0.915129 ! Fit after self-cal, rms=0.102145Jy sigma=0.913913 ! Inverting map ! Added new window around map position (7, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295418 Jy ! Component: 100 - total flux cleaned = 0.00313582 Jy ! Component: 150 - total flux cleaned = 0.00284607 Jy ! Component: 200 - total flux cleaned = 0.00270382 Jy ! Total flux subtracted in 200 components = 0.00270382 Jy ! Clean residual min=-0.005373 max=0.005240 Jy/beam ! Clean residual mean=-0.000001 rms=0.001232 Jy/beam ! Combined flux in latest and established models = 0.917852 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 79 components and 0.917852 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101619Jy sigma=0.904990 ! Fit after self-cal, rms=0.101538Jy sigma=0.904061 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.101538Jy sigma=0.904061 ! Fit after self-cal, rms=0.101244Jy sigma=0.900730 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=4.198 mas, bpa=-14.9 degrees ! Estimated noise=1.14574 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.0035664 Jy ! Component: 100 - total flux cleaned = -0.0040944 Jy ! Component: 150 - total flux cleaned = -0.00424599 Jy ! Component: 200 - total flux cleaned = -0.00411426 Jy ! Total flux subtracted in 200 components = -0.00411426 Jy ! Clean residual min=-0.004798 max=0.004749 Jy/beam ! Clean residual mean=-0.000001 rms=0.001140 Jy/beam ! Combined flux in latest and established models = 0.913738 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 84 components and 0.913738 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100765Jy sigma=0.891880 ! Fit after self-cal, rms=0.100723Jy sigma=0.891446 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.38053e-05 Jy ! Component: 100 - total flux cleaned = 0.000110207 Jy ! Component: 150 - total flux cleaned = 0.000226234 Jy ! Component: 200 - total flux cleaned = 0.000224695 Jy ! Total flux subtracted in 200 components = 0.000224695 Jy ! Clean residual min=-0.004720 max=0.004551 Jy/beam ! Clean residual mean=-0.000001 rms=0.001110 Jy/beam ! Combined flux in latest and established models = 0.913963 Jy ! Performing phase self-cal ! Adding 31 model components to the UV plane model. ! The established model now contains 87 components and 0.913963 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100472Jy sigma=0.887030 ! Fit after self-cal, rms=0.100446Jy sigma=0.886787 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100446Jy sigma=0.886787 ! Fit after self-cal, rms=0.100224Jy sigma=0.884811 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.948 mas, bmaj=10.76 mas, bpa=-13.08 degrees ! Estimated noise=1.52156 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00183505 Jy ! Component: 100 - total flux cleaned = -0.00261014 Jy ! Component: 150 - total flux cleaned = -0.00300738 Jy ! Component: 200 - total flux cleaned = -0.00328354 Jy ! Total flux subtracted in 200 components = -0.00328354 Jy ! Clean residual min=-0.004438 max=0.004266 Jy/beam ! Clean residual mean=0.000000 rms=0.001213 Jy/beam ! Combined flux in latest and established models = 0.910679 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 109 components and 0.910679 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100226Jy sigma=0.883233 ! Fit after self-cal, rms=0.100197Jy sigma=0.883014 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000103864 Jy ! Component: 100 - total flux cleaned = -0.000207265 Jy ! Component: 150 - total flux cleaned = -0.000206113 Jy ! Component: 200 - total flux cleaned = -0.000294203 Jy ! Total flux subtracted in 200 components = -0.000294203 Jy ! Clean residual min=-0.004363 max=0.004172 Jy/beam ! Clean residual mean=-0.000000 rms=0.001196 Jy/beam ! Combined flux in latest and established models = 0.910385 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 119 components and 0.910385 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100189Jy sigma=0.882172 ! Fit after self-cal, rms=0.100174Jy sigma=0.882086 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=3.048 mas, bmaj=4.196 mas, bpa=-14.92 degrees ! Estimated noise=1.14436 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.048 x 4.196 at -14.92 degrees (North through East) ! Clean map min=-0.0045596 max=0.74488 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.100174Jy sigma=0.882086 ! Fit after self-cal, rms=0.090512Jy sigma=0.793399 ! Inverting map and beam ! Estimated beam: bmin=3.049 mas, bmaj=4.197 mas, bpa=-14.92 degrees ! Estimated noise=1.14344 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00377117 Jy ! Component: 100 - total flux cleaned = -0.00414508 Jy ! Component: 150 - total flux cleaned = -0.00415302 Jy ! Component: 200 - total flux cleaned = -0.00415507 Jy ! Total flux subtracted in 200 components = -0.00415507 Jy ! Clean residual min=-0.004310 max=0.004448 Jy/beam ! Clean residual mean=-0.000001 rms=0.001029 Jy/beam ! Combined flux in latest and established models = 0.90623 Jy ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 126 components and 0.90623 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090189Jy sigma=0.788118 ! Fit after self-cal, rms=0.090183Jy sigma=0.787988 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000118023 Jy ! Component: 100 - total flux cleaned = -0.000115376 Jy ! Component: 150 - total flux cleaned = -0.000117863 Jy ! Component: 200 - total flux cleaned = -0.00020228 Jy ! Total flux subtracted in 200 components = -0.00020228 Jy ! Clean residual min=-0.004236 max=0.004247 Jy/beam ! Clean residual mean=-0.000001 rms=0.001015 Jy/beam ! Combined flux in latest and established models = 0.906028 Jy ! Performing phase self-cal ! Adding 30 model components to the UV plane model. ! The established model now contains 130 components and 0.906027 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090011Jy sigma=0.785523 ! Fit after self-cal, rms=0.090008Jy sigma=0.785440 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.090008Jy sigma=0.785440 ! Fit after self-cal, rms=0.089857Jy sigma=0.784120 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.411 mas, bmaj=3.593 mas, bpa=-13.91 degrees ! Estimated noise=1.51722 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.590579 Jy ! Component: 100 - total flux cleaned = 0.727692 Jy ! Component: 150 - total flux cleaned = 0.7831 Jy ! Component: 200 - total flux cleaned = 0.81551 Jy ! Total flux subtracted in 200 components = 0.81551 Jy ! Clean residual min=-0.008975 max=0.017338 Jy/beam ! Clean residual mean=-0.000057 rms=0.002049 Jy/beam ! Combined flux in latest and established models = 0.81551 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 22 model components to the UV plane model. ! The established model now contains 22 components and 0.81551 Jy ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=4.196 mas, bpa=-14.95 degrees ! Estimated noise=1.14241 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0308097 Jy ! Component: 100 - total flux cleaned = 0.0497819 Jy ! Component: 150 - total flux cleaned = 0.0620833 Jy ! Component: 200 - total flux cleaned = 0.0703675 Jy ! Total flux subtracted in 200 components = 0.0703675 Jy ! Clean residual min=-0.004714 max=0.005749 Jy/beam ! Clean residual mean=-0.000017 rms=0.001152 Jy/beam ! Combined flux in latest and established models = 0.885877 Jy ! Adding 46 model components to the UV plane model. ! The established model now contains 54 components and 0.885877 Jy ! Inverting map ! Added new window around map position (-10, 2.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00662845 Jy ! Component: 100 - total flux cleaned = 0.0116137 Jy ! Component: 150 - total flux cleaned = 0.015486 Jy ! Component: 200 - total flux cleaned = 0.0185061 Jy ! Total flux subtracted in 200 components = 0.0185061 Jy ! Clean residual min=-0.004210 max=0.004281 Jy/beam ! Clean residual mean=-0.000001 rms=0.001000 Jy/beam ! Combined flux in latest and established models = 0.904383 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 79 components and 0.904383 Jy ! Inverting map ! Added new window around map position (0.5, -99). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00344189 Jy ! Component: 100 - total flux cleaned = 0.00465308 Jy ! Component: 150 - total flux cleaned = 0.00483891 Jy ! Component: 200 - total flux cleaned = 0.0050161 Jy ! Total flux subtracted in 200 components = 0.0050161 Jy ! Clean residual min=-0.004108 max=0.003910 Jy/beam ! Clean residual mean=0.000002 rms=0.000977 Jy/beam ! Combined flux in latest and established models = 0.909399 Jy ! Adding 31 model components to the UV plane model. ! The established model now contains 99 components and 0.909399 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.961 mas, bmaj=10.79 mas, bpa=-12.85 degrees ! Estimated noise=1.5161 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000787776 Jy ! Component: 100 - total flux cleaned = 0.000720699 Jy ! Component: 150 - total flux cleaned = 0.000662296 Jy ! Component: 200 - total flux cleaned = 0.000712796 Jy ! Total flux subtracted in 200 components = 0.000712796 Jy ! Clean residual min=-0.004075 max=0.003650 Jy/beam ! Clean residual mean=0.000009 rms=0.001137 Jy/beam ! Combined flux in latest and established models = 0.910112 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -1.45225e-06 Jy ! Component: 100 - total flux cleaned = -7.99746e-07 Jy ! Component: 150 - total flux cleaned = 3.88984e-05 Jy ! Component: 200 - total flux cleaned = 2.51724e-06 Jy ! Total flux subtracted in 200 components = 2.51724e-06 Jy ! Clean residual min=-0.004048 max=0.003590 Jy/beam ! Clean residual mean=0.000009 rms=0.001125 Jy/beam ! Combined flux in latest and established models = 0.910115 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 141 components and 0.910114 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=3.05 mas, bmaj=4.196 mas, bpa=-14.95 degrees ! Estimated noise=1.14241 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000657462 Jy ! Component: 100 - total flux cleaned = -0.000581162 Jy ! Component: 150 - total flux cleaned = -0.000508767 Jy ! Component: 200 - total flux cleaned = -0.00043635 Jy ! Total flux subtracted in 200 components = -0.00043635 Jy ! Clean residual min=-0.004010 max=0.003821 Jy/beam ! Clean residual mean=0.000003 rms=0.000949 Jy/beam ! Combined flux in latest and established models = 0.909678 Jy selfcal ! Performing phase self-cal ! Adding 29 model components to the UV plane model. ! The established model now contains 156 components and 0.909678 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.089255Jy sigma=0.776297 ! Fit after self-cal, rms=0.089137Jy sigma=0.774522 wmodel J0958+6533_S_map.mod ! Writing 156 model components to file: J0958+6533_S_map.mod wobs J0958+6533_S_uvs.fits ! Writing UV FITS file: J0958+6533_S_uvs.fits wwins J0958+6533_S_map.win ! wwins: Wrote 7 windows to J0958+6533_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000448454 Jy ! Component: 100 - total flux cleaned = -0.000931678 Jy ! Component: 150 - total flux cleaned = -0.00132788 Jy ! Component: 200 - total flux cleaned = -0.00145648 Jy ! Component: 250 - total flux cleaned = -0.00183051 Jy ! Component: 300 - total flux cleaned = -0.00219462 Jy ! Component: 350 - total flux cleaned = -0.00261049 Jy ! Component: 400 - total flux cleaned = -0.00284412 Jy ! Component: 450 - total flux cleaned = -0.00324518 Jy ! Component: 500 - total flux cleaned = -0.00363872 Jy ! Component: 550 - total flux cleaned = -0.00380555 Jy ! Component: 600 - total flux cleaned = -0.00402437 Jy ! Component: 650 - total flux cleaned = -0.00413309 Jy ! Component: 700 - total flux cleaned = -0.00439927 Jy ! Component: 750 - total flux cleaned = -0.00439952 Jy ! Component: 800 - total flux cleaned = -0.00450339 Jy ! Component: 850 - total flux cleaned = -0.0046591 Jy ! Component: 900 - total flux cleaned = -0.00471106 Jy ! Component: 950 - total flux cleaned = -0.00496432 Jy ! Component: 1000 - total flux cleaned = -0.00506421 Jy ! Component: 1050 - total flux cleaned = -0.00521396 Jy ! Component: 1100 - total flux cleaned = -0.00526351 Jy ! Component: 1150 - total flux cleaned = -0.00541019 Jy ! Component: 1200 - total flux cleaned = -0.00541072 Jy ! Component: 1250 - total flux cleaned = -0.00565121 Jy ! Component: 1300 - total flux cleaned = -0.00550821 Jy ! Component: 1350 - total flux cleaned = -0.00569783 Jy ! Component: 1400 - total flux cleaned = -0.00579213 Jy ! Component: 1450 - total flux cleaned = -0.0057455 Jy ! Component: 1500 - total flux cleaned = -0.00602408 Jy ! Component: 1550 - total flux cleaned = -0.00606937 Jy ! Component: 1600 - total flux cleaned = -0.00597747 Jy ! Component: 1650 - total flux cleaned = -0.00602347 Jy ! Component: 1700 - total flux cleaned = -0.00615925 Jy ! Component: 1750 - total flux cleaned = -0.00633903 Jy ! Component: 1800 - total flux cleaned = -0.0062944 Jy ! Component: 1850 - total flux cleaned = -0.00651654 Jy ! Component: 1900 - total flux cleaned = -0.00642824 Jy ! Component: 1950 - total flux cleaned = -0.00655981 Jy ! Component: 2000 - total flux cleaned = -0.00664652 Jy ! Component: 2050 - total flux cleaned = -0.00673339 Jy ! Component: 2100 - total flux cleaned = -0.00690553 Jy ! Component: 2150 - total flux cleaned = -0.00686261 Jy ! Component: 2200 - total flux cleaned = -0.00699082 Jy ! Component: 2250 - total flux cleaned = -0.00720216 Jy ! Component: 2300 - total flux cleaned = -0.00699142 Jy ! Component: 2350 - total flux cleaned = -0.00720085 Jy ! Component: 2400 - total flux cleaned = -0.00732605 Jy ! Component: 2450 - total flux cleaned = -0.0073259 Jy ! Component: 2500 - total flux cleaned = -0.00749059 Jy ! Component: 2550 - total flux cleaned = -0.00744947 Jy ! Component: 2600 - total flux cleaned = -0.00757161 Jy ! Component: 2650 - total flux cleaned = -0.00765226 Jy ! Component: 2700 - total flux cleaned = -0.00781383 Jy ! Component: 2750 - total flux cleaned = -0.00785387 Jy ! Component: 2800 - total flux cleaned = -0.00789388 Jy ! Component: 2850 - total flux cleaned = -0.00805286 Jy ! Component: 2900 - total flux cleaned = -0.00813174 Jy ! Component: 2950 - total flux cleaned = -0.00797408 Jy ! Component: 3000 - total flux cleaned = -0.00805242 Jy ! Component: 3050 - total flux cleaned = -0.00816939 Jy ! Component: 3100 - total flux cleaned = -0.00828612 Jy ! Component: 3150 - total flux cleaned = -0.00832489 Jy ! Component: 3200 - total flux cleaned = -0.00844042 Jy ! Component: 3250 - total flux cleaned = -0.00855561 Jy ! Component: 3300 - total flux cleaned = -0.00844107 Jy ! Component: 3350 - total flux cleaned = -0.00866933 Jy ! Component: 3400 - total flux cleaned = -0.00863166 Jy ! Component: 3450 - total flux cleaned = -0.00874468 Jy ! Component: 3500 - total flux cleaned = -0.00889487 Jy ! Component: 3550 - total flux cleaned = -0.00885736 Jy ! Component: 3600 - total flux cleaned = -0.00919326 Jy ! Component: 3650 - total flux cleaned = -0.00941633 Jy ! Component: 3700 - total flux cleaned = -0.00956416 Jy ! Component: 3750 - total flux cleaned = -0.0098591 Jy ! Component: 3800 - total flux cleaned = -0.00978547 Jy ! Component: 3850 - total flux cleaned = -0.0100049 Jy ! Component: 3900 - total flux cleaned = -0.0100051 Jy ! Component: 3950 - total flux cleaned = -0.00986003 Jy ! Component: 4000 - total flux cleaned = -0.010294 Jy ! Component: 4050 - total flux cleaned = -0.0102578 Jy ! Total flux subtracted in 4096 components = -0.0101143 Jy ! Clean residual min=-0.002137 max=0.002290 Jy/beam ! Clean residual mean=0.000000 rms=0.000635 Jy/beam ! Combined flux in latest and established models = 0.899564 Jy keep ! Adding 306 model components to the UV plane model. ! The established model now contains 462 components and 0.899563 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv123_uvs/J0958+6533_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 3.05 x 4.196 at -14.95 degrees (North through East) ! Clean map min=-0.0031884 max=0.75617 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv123_uvs/J0958+6533_S_map.fits wmodel /scr/pima/rv123_uvs/J0958+6533_S_map.mod ! Writing 462 model components to file: /scr/pima/rv123_uvs/J0958+6533_S_map.mod wobs /scr/pima/rv123_uvs/J0958+6533_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv123_uvs/J0958+6533_S_uvs.fits wwins /scr/pima/rv123_uvs/J0958+6533_S_map.win ! wwins: Wrote 8 windows to /scr/pima/rv123_uvs/J0958+6533_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.756169 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000631853 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.250679 0.250679 0.501359 1.00272 2.00544 4.01087 8.02174 16.0435 32.087 64.1739 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0018 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.756 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 1196.75 quit ! Quitting program ! Log file /scr/pima/rv123_uvs/J0958+6533_S_dfm.log closed on Sun Dec 23 05:03:00 2018