! Started logfile: /scr/pima/rv123_uvs/J0808+4052_S_dfm.log on Sun Dec 23 05:02:30 2018 float field_size field_size = 1024 float field_cell field_cell = 0.5000 float taper_size taper_size = 20.0 float freq freq = 2.23275 obs /scr/pima/rv123_uvs/J0808+4052_S_uva.fits ! Reading UV FITS file: /scr/pima/rv123_uvs/J0808+4052_S_uva.fits ! AN table 1: 12 integrations on 10 of 10 possible baselines. ! AN table 2: 15 integrations on 45 of 45 possible baselines. ! AN table 3: 13 integrations on 45 of 45 possible baselines. ! AN table 4: 3 integrations on 3 of 3 possible baselines. ! AN table 5: 8 integrations on 10 of 10 possible baselines. ! AN table 6: 29 integrations on 28 of 28 possible baselines. ! AN table 7: 87 integrations on 66 of 66 possible baselines. ! AN table 8: 2 integrations on 21 of 21 possible baselines. ! Apparent sampling: 0.320893 visibilities/baseline/integration-bin. ! *** This seems a bit low - see "help observe" on the binwid argument. ! Found source: J0808+4052 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 2.23275e+09 8e+06 1 8e+06 ! 02 2 2.26275e+09 8e+06 1 8e+06 ! 03 3 2.35275e+09 8e+06 1 8e+06 ! 04 4 2.37275e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 89 lines of history. ! ! Reading 10352 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.5 print "taper_size =", taper_size ! taper_size = 20 ![@/opt64/bin/pima_mupet_01.dfm J0808+4052_S] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 5. ! A total of 168 telescope corrections were flagged in sub-array 6. ! A total of 748 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 2. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 5. ! A total of 168 telescope corrections were flagged in sub-array 6. ! A total of 748 telescope corrections were flagged in sub-array 7. ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! A total of 150 telescope corrections were flagged in sub-array 2. ! A total of 130 telescope corrections were flagged in sub-array 3. ! A total of 9 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 5. ! A total of 232 telescope corrections were flagged in sub-array 6. ! A total of 896 telescope corrections were flagged in sub-array 7. ! A total of 14 telescope corrections were flagged in sub-array 8. ! ! Correcting IF 4. ! A total of 14 telescope corrections were flagged in sub-array 1. ! A total of 64 telescope corrections were flagged in sub-array 2. ! A total of 44 telescope corrections were flagged in sub-array 3. ! A total of 3 telescope corrections were flagged in sub-array 4. ! A total of 22 telescope corrections were flagged in sub-array 5. ! A total of 168 telescope corrections were flagged in sub-array 6. ! A total of 748 telescope corrections were flagged in sub-array 7. ! ! Fit before self-cal, rms=1.162247Jy sigma=14.515253 ! Fit after self-cal, rms=0.501227Jy sigma=6.268844 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.221 mas, bmaj=2.684 mas, bpa=33.23 degrees ! Estimated noise=1.05454 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.411465 Jy ! Component: 100 - total flux cleaned = 0.513429 Jy ! Total flux subtracted in 100 components = 0.513429 Jy ! Clean residual min=-0.017726 max=0.040087 Jy/beam ! Clean residual mean=-0.000045 rms=0.003791 Jy/beam ! Combined flux in latest and established models = 0.513428 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 8 components and 0.513428 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.204582Jy sigma=2.114778 ! Fit after self-cal, rms=0.204456Jy sigma=2.114332 ! Inverting map ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0440022 Jy ! Component: 100 - total flux cleaned = 0.0684113 Jy ! Total flux subtracted in 100 components = 0.0684113 Jy ! Clean residual min=-0.018340 max=0.030634 Jy/beam ! Clean residual mean=-0.000020 rms=0.003349 Jy/beam ! Combined flux in latest and established models = 0.58184 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 18 components and 0.58184 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.192329Jy sigma=1.930161 ! Fit after self-cal, rms=0.192140Jy sigma=1.928443 ! Inverting map ! Added new window around map position (6, 6). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0275152 Jy ! Component: 100 - total flux cleaned = 0.0431512 Jy ! Total flux subtracted in 100 components = 0.0431512 Jy ! Clean residual min=-0.016637 max=0.023999 Jy/beam ! Clean residual mean=-0.000005 rms=0.003140 Jy/beam ! Combined flux in latest and established models = 0.624991 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 34 components and 0.624991 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.187486Jy sigma=1.853397 ! Fit after self-cal, rms=0.187017Jy sigma=1.846109 ! Inverting map ! Added new window around map position (-6.5, -5.5). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0190228 Jy ! Component: 100 - total flux cleaned = 0.0311607 Jy ! Total flux subtracted in 100 components = 0.0311607 Jy ! Clean residual min=-0.015812 max=0.013592 Jy/beam ! Clean residual mean=0.000005 rms=0.003012 Jy/beam ! Combined flux in latest and established models = 0.656152 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 43 components and 0.656152 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.184743Jy sigma=1.811226 ! Fit after self-cal, rms=0.184690Jy sigma=1.810605 ! Inverting map print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.547 mas, bmaj=2.851 mas, bpa=4.514 degrees ! Estimated noise=0.828635 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0094954 Jy ! Component: 100 - total flux cleaned = 0.0143466 Jy ! Component: 150 - total flux cleaned = 0.0179511 Jy ! Component: 200 - total flux cleaned = 0.0199735 Jy ! Total flux subtracted in 200 components = 0.0199735 Jy ! Clean residual min=-0.016839 max=0.015530 Jy/beam ! Clean residual mean=0.000047 rms=0.003574 Jy/beam ! Combined flux in latest and established models = 0.676125 Jy ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 54 components and 0.676125 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.182701Jy sigma=1.792639 ! Fit after self-cal, rms=0.182630Jy sigma=1.791772 ! Inverting map print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.547 x 2.851 at 4.514 degrees (North through East) ! Clean map min=-0.015874 max=0.52129 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.18 MK 1.06 NY 1.23 ON 0.82 ! WN 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 0.90 FD 1.06 HN 0.94 KP 0.99 ! LA 0.90 MC 1.02 MK 1.11 NL 1.03 ! OV 0.95 SC 0.91 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.13 FD 1.03 HN 0.94 KP 0.95 ! LA 0.92 MK 1.05 NL 1.04 ON 0.76 ! OV 0.92 SC 0.94 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MK 0.00* WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WN 0.00* WZ 0.00* ! YG 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.17 KP 0.97 LA 0.99 MK 1.04 ! NY 1.53 OV 1.17 WN 1.00* YG 1.00* ! ! A total of 42 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.05 FD 1.14 HH 1.13 HN 0.91 ! KP 0.99 LA 0.92 NL 1.15 NY 1.48 ! ON 0.85 SC 0.99 WN 1.00* WZ 0.92 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.11 FD 1.09 HN 0.92 LA 0.91 ! NL 1.20 PT 1.07 SC 1.01 ! ! ! Correcting IF 2. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.16 MK 1.03 NY 1.07 ON 1.01 ! WN 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.49 FD 1.07 HN 0.97 KP 0.98 ! LA 0.92 MC 0.87 MK 1.09 NL 1.01 ! OV 0.75 SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.95 FD 1.03 HN 0.94 KP 0.95 ! LA 0.92 MK 1.03 NL 1.06 ON 0.86 ! OV 0.73 SC 0.93 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MK 0.00* WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WN 0.00* WZ 0.00* ! YG 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.17 KP 0.95 LA 1.07 MK 0.98 ! NY 1.56 OV 1.57 WN 1.00* YG 1.00* ! ! A total of 42 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.12 FD 1.15 HH 1.10 HN 0.91 ! KP 0.96 LA 0.92 NL 1.15 NY 1.32 ! ON 1.00 SC 0.96 WN 1.00* WZ 0.81 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.08 FD 1.09 HN 0.92 LA 0.92 ! NL 1.12 PT 1.04 SC 1.05 ! ! ! Correcting IF 3. ! A total of 30 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 0.00* MK 0.00* NY 0.00* ON 0.00* ! WN 0.00* ! ! Telescope amplitude corrections in sub-array 2: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MC 0.00* MK 0.00* NL 0.00* ! OV 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 3: ! BR 0.00* FD 0.00* HN 0.00* KP 0.00* ! LA 0.00* MK 0.00* NL 0.00* ON 0.00* ! OV 0.00* SC 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MK 0.00* WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WN 0.00* WZ 0.00* ! YG 0.00* ! ! Telescope amplitude corrections in sub-array 6: ! BR 0.00* KP 0.00* LA 0.00* MK 0.00* ! NY 0.00* OV 0.00* WN 0.00* YG 0.00* ! ! A total of 60 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.00* FD 1.00* HH 1.02 HN 1.00* ! KP 1.00* LA 1.00* NL 1.00* NY 1.29 ! ON 0.70 SC 1.00* WN 1.00* WZ 0.86 ! ! Telescope amplitude corrections in sub-array 8: ! BR 0.00* FD 0.00* HN 0.00* LA 0.00* ! NL 0.00* PT 0.00* SC 0.00* ! ! ! Correcting IF 4. ! A total of 6 telescope corrections were flagged in sub-array 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.13 MK 1.08 NY 1.12 ON 0.86 ! WN 1.00* ! ! A total of 18 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! BR 1.21 FD 1.05 HN 0.93 KP 0.98 ! LA 0.90 MC 1.09 MK 1.02 NL 0.92 ! OV 0.88 SC 0.92 ! ! Telescope amplitude corrections in sub-array 3: ! BR 1.01 FD 1.05 HN 0.95 KP 0.94 ! LA 0.89 MK 0.96 NL 1.05 ON 0.68 ! OV 0.87 SC 0.92 ! ! A total of 6 telescope corrections were flagged in sub-array 4. ! Telescope amplitude corrections in sub-array 4: ! BR 0.00* MK 0.00* WZ 0.00* ! ! A total of 18 telescope corrections were flagged in sub-array 5. ! Telescope amplitude corrections in sub-array 5: ! NY 0.00* ON 0.00* WN 0.00* WZ 0.00* ! YG 0.00* ! ! A total of 12 telescope corrections were flagged in sub-array 6. ! Telescope amplitude corrections in sub-array 6: ! BR 1.04 KP 1.00 LA 1.04 MK 1.01 ! NY 1.51 OV 1.50 WN 1.00* YG 1.00* ! ! A total of 42 telescope corrections were flagged in sub-array 7. ! Telescope amplitude corrections in sub-array 7: ! BR 1.06 FD 1.11 HH 0.95 HN 0.91 ! KP 0.97 LA 0.91 NL 1.15 NY 1.36 ! ON 0.75 SC 0.95 WN 1.00* WZ 0.77 ! ! Telescope amplitude corrections in sub-array 8: ! BR 1.06 FD 1.05 HN 0.92 LA 0.91 ! NL 1.15 PT 1.03 SC 1.04 ! ! ! Fit before self-cal, rms=0.182630Jy sigma=1.791772 ! Fit after self-cal, rms=0.130662Jy sigma=1.248236 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Estimated beam: bmin=2.577 mas, bmaj=2.892 mas, bpa=7.746 degrees ! Estimated noise=0.848104 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00817494 Jy ! Component: 100 - total flux cleaned = -0.0104829 Jy ! Component: 150 - total flux cleaned = -0.0112099 Jy ! Component: 200 - total flux cleaned = -0.0115238 Jy ! Total flux subtracted in 200 components = -0.0115238 Jy ! Clean residual min=-0.007524 max=0.009445 Jy/beam ! Clean residual mean=0.000016 rms=0.001847 Jy/beam ! Combined flux in latest and established models = 0.664601 Jy ! Performing phase self-cal ! Adding 14 model components to the UV plane model. ! The established model now contains 62 components and 0.664602 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129738Jy sigma=1.235035 ! Fit after self-cal, rms=0.129845Jy sigma=1.233277 ! Inverting map ! Added new window around map position (9.5, 6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00724739 Jy ! Component: 100 - total flux cleaned = 0.00825143 Jy ! Component: 150 - total flux cleaned = 0.00869105 Jy ! Component: 200 - total flux cleaned = 0.00831921 Jy ! Total flux subtracted in 200 components = 0.00831921 Jy ! Clean residual min=-0.007081 max=0.008234 Jy/beam ! Clean residual mean=0.000021 rms=0.001789 Jy/beam ! Combined flux in latest and established models = 0.672921 Jy ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 73 components and 0.672921 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129358Jy sigma=1.219269 ! Fit after self-cal, rms=0.129314Jy sigma=1.218027 ! Inverting map selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.129314Jy sigma=1.218027 ! Fit after self-cal, rms=0.126450Jy sigma=1.061771 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.577 mas, bmaj=2.901 mas, bpa=8.206 degrees ! Estimated noise=0.848356 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00483314 Jy ! Component: 100 - total flux cleaned = 0.00534011 Jy ! Component: 150 - total flux cleaned = 0.00545172 Jy ! Component: 200 - total flux cleaned = 0.00566922 Jy ! Total flux subtracted in 200 components = 0.00566922 Jy ! Clean residual min=-0.004942 max=0.004992 Jy/beam ! Clean residual mean=-0.000014 rms=0.001174 Jy/beam ! Combined flux in latest and established models = 0.67859 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 83 components and 0.67859 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126140Jy sigma=1.052785 ! Fit after self-cal, rms=0.126396Jy sigma=1.051904 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (3, 3). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00295766 Jy ! Component: 100 - total flux cleaned = 0.00295994 Jy ! Component: 150 - total flux cleaned = 0.00315423 Jy ! Component: 200 - total flux cleaned = 0.00341959 Jy ! Total flux subtracted in 200 components = 0.00341959 Jy ! Clean residual min=-0.004893 max=0.004678 Jy/beam ! Clean residual mean=-0.000012 rms=0.001153 Jy/beam ! Combined flux in latest and established models = 0.68201 Jy ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 96 components and 0.68201 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126195Jy sigma=1.047198 ! Fit after self-cal, rms=0.126199Jy sigma=1.046770 ! Inverting map selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.126199Jy sigma=1.046770 ! Fit after self-cal, rms=0.123872Jy sigma=0.983292 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.575 mas, bmaj=2.905 mas, bpa=7.533 degrees ! Estimated noise=0.847024 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000492947 Jy ! Component: 100 - total flux cleaned = -0.000273617 Jy ! Component: 150 - total flux cleaned = 6.04646e-06 Jy ! Component: 200 - total flux cleaned = 0.000163964 Jy ! Total flux subtracted in 200 components = 0.000163964 Jy ! Clean residual min=-0.004109 max=0.003998 Jy/beam ! Clean residual mean=-0.000004 rms=0.000969 Jy/beam ! Combined flux in latest and established models = 0.682174 Jy selfcal ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 109 components and 0.682174 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123752Jy sigma=0.979090 ! Fit after self-cal, rms=0.123784Jy sigma=0.978870 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000450161 Jy ! Component: 100 - total flux cleaned = 0.000739657 Jy ! Component: 150 - total flux cleaned = 0.000942154 Jy ! Component: 200 - total flux cleaned = 0.00119735 Jy ! Total flux subtracted in 200 components = 0.00119735 Jy ! Clean residual min=-0.004098 max=0.003905 Jy/beam ! Clean residual mean=-0.000003 rms=0.000962 Jy/beam ! Combined flux in latest and established models = 0.683371 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 119 components and 0.683371 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123715Jy sigma=0.977278 ! Fit after self-cal, rms=0.123722Jy sigma=0.977204 ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123722Jy sigma=0.977204 ! Fit after self-cal, rms=0.123794Jy sigma=0.976416 clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.311 mas, bmaj=8.2 mas, bpa=-46.58 degrees ! Estimated noise=1.25275 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000999783 Jy ! Component: 100 - total flux cleaned = 0.00154811 Jy ! Component: 150 - total flux cleaned = 0.00180959 Jy ! Component: 200 - total flux cleaned = 0.00203037 Jy ! Total flux subtracted in 200 components = 0.00203037 Jy ! Clean residual min=-0.005402 max=0.005655 Jy/beam ! Clean residual mean=-0.000009 rms=0.001449 Jy/beam ! Combined flux in latest and established models = 0.685401 Jy selfcal ! Performing phase self-cal ! Adding 19 model components to the UV plane model. ! The established model now contains 137 components and 0.685401 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123771Jy sigma=0.975493 ! Fit after self-cal, rms=0.123772Jy sigma=0.975383 flux_cutoff = imstat(rms) * dynam ! Inverting map repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000439931 Jy ! Component: 100 - total flux cleaned = 0.000631916 Jy ! Component: 150 - total flux cleaned = 0.000795117 Jy ! Component: 200 - total flux cleaned = 0.000901296 Jy ! Total flux subtracted in 200 components = 0.000901296 Jy ! Clean residual min=-0.005299 max=0.005747 Jy/beam ! Clean residual mean=-0.000007 rms=0.001448 Jy/beam ! Combined flux in latest and established models = 0.686302 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 145 components and 0.686302 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123786Jy sigma=0.975364 ! Fit after self-cal, rms=0.123791Jy sigma=0.975308 ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=2.908 mas, bpa=7.431 degrees ! Estimated noise=0.846747 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.576 x 2.908 at 7.431 degrees (North through East) ! Clean map min=-0.0048116 max=0.52294 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123791Jy sigma=0.975308 ! Fit after self-cal, rms=0.123751Jy sigma=0.855911 ! Inverting map and beam ! Estimated beam: bmin=2.575 mas, bmaj=2.909 mas, bpa=7.468 degrees ! Estimated noise=0.845974 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00122703 Jy ! Component: 100 - total flux cleaned = -0.00166512 Jy ! Component: 150 - total flux cleaned = -0.00179576 Jy ! Component: 200 - total flux cleaned = -0.00191338 Jy ! Total flux subtracted in 200 components = -0.00191338 Jy ! Clean residual min=-0.003978 max=0.003879 Jy/beam ! Clean residual mean=-0.000003 rms=0.000940 Jy/beam ! Combined flux in latest and established models = 0.684389 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 152 components and 0.684389 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123674Jy sigma=0.854234 ! Fit after self-cal, rms=0.123676Jy sigma=0.854178 ! Inverting map ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.67367e-06 Jy ! Component: 100 - total flux cleaned = 3.7224e-06 Jy ! Component: 150 - total flux cleaned = -9.47301e-05 Jy ! Component: 200 - total flux cleaned = -9.31744e-05 Jy ! Total flux subtracted in 200 components = -9.31744e-05 Jy ! Clean residual min=-0.004009 max=0.003874 Jy/beam ! Clean residual mean=-0.000003 rms=0.000938 Jy/beam ! Combined flux in latest and established models = 0.684296 Jy ! Performing phase self-cal ! Adding 32 model components to the UV plane model. ! The established model now contains 154 components and 0.684296 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123631Jy sigma=0.853469 ! Fit after self-cal, rms=0.123634Jy sigma=0.853433 ! Inverting map ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123634Jy sigma=0.853433 ! Fit after self-cal, rms=0.123570Jy sigma=0.853029 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=2.276 mas, bmaj=2.718 mas, bpa=32.61 degrees ! Estimated noise=1.0674 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.410677 Jy ! Component: 100 - total flux cleaned = 0.509626 Jy ! Component: 150 - total flux cleaned = 0.550926 Jy ! Component: 200 - total flux cleaned = 0.57566 Jy ! Total flux subtracted in 200 components = 0.57566 Jy ! Clean residual min=-0.006168 max=0.013829 Jy/beam ! Clean residual mean=-0.000035 rms=0.001514 Jy/beam ! Combined flux in latest and established models = 0.575661 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 23 model components to the UV plane model. ! The established model now contains 23 components and 0.575661 Jy ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=2.91 mas, bpa=7.49 degrees ! Estimated noise=0.845576 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0240475 Jy ! Component: 100 - total flux cleaned = 0.0410611 Jy ! Component: 150 - total flux cleaned = 0.0537985 Jy ! Component: 200 - total flux cleaned = 0.0638641 Jy ! Total flux subtracted in 200 components = 0.0638641 Jy ! Clean residual min=-0.004555 max=0.006044 Jy/beam ! Clean residual mean=-0.000023 rms=0.001155 Jy/beam ! Combined flux in latest and established models = 0.639525 Jy ! Adding 57 model components to the UV plane model. ! The established model now contains 70 components and 0.639525 Jy ! Inverting map ! Added new window around map position (10, 10.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00813251 Jy ! Component: 100 - total flux cleaned = 0.0147644 Jy ! Component: 150 - total flux cleaned = 0.0198432 Jy ! Component: 200 - total flux cleaned = 0.0232119 Jy ! Total flux subtracted in 200 components = 0.0232119 Jy ! Clean residual min=-0.004167 max=0.004253 Jy/beam ! Clean residual mean=-0.000012 rms=0.000995 Jy/beam ! Combined flux in latest and established models = 0.662736 Jy ! Adding 45 model components to the UV plane model. ! The established model now contains 93 components and 0.662736 Jy ! Inverting map ! Added new window around map position (-31, -76.5). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00379146 Jy ! Component: 100 - total flux cleaned = 0.0065838 Jy ! Component: 150 - total flux cleaned = 0.00906879 Jy ! Component: 200 - total flux cleaned = 0.0113003 Jy ! Total flux subtracted in 200 components = 0.0113003 Jy ! Clean residual min=-0.004063 max=0.003822 Jy/beam ! Clean residual mean=-0.000007 rms=0.000945 Jy/beam ! Combined flux in latest and established models = 0.674037 Jy ! Adding 40 model components to the UV plane model. ! The established model now contains 110 components and 0.674037 Jy ! Inverting map uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Estimated beam: bmin=7.317 mas, bmaj=8.192 mas, bpa=-46.62 degrees ! Estimated noise=1.25009 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00543785 Jy ! Component: 100 - total flux cleaned = 0.00809147 Jy ! Component: 150 - total flux cleaned = 0.00862821 Jy ! Component: 200 - total flux cleaned = 0.00893546 Jy ! Total flux subtracted in 200 components = 0.00893546 Jy ! Clean residual min=-0.005451 max=0.005332 Jy/beam ! Clean residual mean=-0.000011 rms=0.001422 Jy/beam ! Combined flux in latest and established models = 0.682972 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000324039 Jy ! Component: 100 - total flux cleaned = 0.000499497 Jy ! Component: 150 - total flux cleaned = 0.000604795 Jy ! Component: 200 - total flux cleaned = 0.000655949 Jy ! Total flux subtracted in 200 components = 0.000655949 Jy ! Clean residual min=-0.005383 max=0.005386 Jy/beam ! Clean residual mean=-0.000010 rms=0.001415 Jy/beam ! Combined flux in latest and established models = 0.683628 Jy ! Adding 68 model components to the UV plane model. ! The established model now contains 167 components and 0.683628 Jy ! Inverting map uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Estimated beam: bmin=2.576 mas, bmaj=2.91 mas, bpa=7.49 degrees ! Estimated noise=0.845576 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000945154 Jy ! Component: 100 - total flux cleaned = 0.00155234 Jy ! Component: 150 - total flux cleaned = 0.00162123 Jy ! Component: 200 - total flux cleaned = 0.00162213 Jy ! Total flux subtracted in 200 components = 0.00162213 Jy ! Clean residual min=-0.004032 max=0.003943 Jy/beam ! Clean residual mean=-0.000002 rms=0.000925 Jy/beam ! Combined flux in latest and established models = 0.68525 Jy selfcal ! Performing phase self-cal ! Adding 27 model components to the UV plane model. ! The established model now contains 185 components and 0.68525 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.123479Jy sigma=0.850897 ! Fit after self-cal, rms=0.123422Jy sigma=0.849970 wmodel J0808+4052_S_map.mod ! Writing 185 model components to file: J0808+4052_S_map.mod wobs J0808+4052_S_uvs.fits ! Writing UV FITS file: J0808+4052_S_uvs.fits wwins J0808+4052_S_map.win ! wwins: Wrote 7 windows to J0808+4052_S_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.000980558 Jy ! Component: 100 - total flux cleaned = -0.00146597 Jy ! Component: 150 - total flux cleaned = -0.00192949 Jy ! Component: 200 - total flux cleaned = -0.00231475 Jy ! Component: 250 - total flux cleaned = -0.00237831 Jy ! Component: 300 - total flux cleaned = -0.00231782 Jy ! Component: 350 - total flux cleaned = -0.00255867 Jy ! Component: 400 - total flux cleaned = -0.00255757 Jy ! Component: 450 - total flux cleaned = -0.00267355 Jy ! Component: 500 - total flux cleaned = -0.00267291 Jy ! Component: 550 - total flux cleaned = -0.00255954 Jy ! Component: 600 - total flux cleaned = -0.00256014 Jy ! Component: 650 - total flux cleaned = -0.00278143 Jy ! Component: 700 - total flux cleaned = -0.0026712 Jy ! Component: 750 - total flux cleaned = -0.00267081 Jy ! Component: 800 - total flux cleaned = -0.00256316 Jy ! Component: 850 - total flux cleaned = -0.0024567 Jy ! Component: 900 - total flux cleaned = -0.00240399 Jy ! Component: 950 - total flux cleaned = -0.00219525 Jy ! Component: 1000 - total flux cleaned = -0.00224722 Jy ! Component: 1050 - total flux cleaned = -0.00214391 Jy ! Component: 1100 - total flux cleaned = -0.00214404 Jy ! Component: 1150 - total flux cleaned = -0.0021442 Jy ! Component: 1200 - total flux cleaned = -0.00199305 Jy ! Component: 1250 - total flux cleaned = -0.00229359 Jy ! Component: 1300 - total flux cleaned = -0.00224401 Jy ! Component: 1350 - total flux cleaned = -0.00224419 Jy ! Component: 1400 - total flux cleaned = -0.00229327 Jy ! Component: 1450 - total flux cleaned = -0.00253762 Jy ! Component: 1500 - total flux cleaned = -0.00244031 Jy ! Component: 1550 - total flux cleaned = -0.00244071 Jy ! Component: 1600 - total flux cleaned = -0.00258499 Jy ! Component: 1650 - total flux cleaned = -0.00248938 Jy ! Component: 1700 - total flux cleaned = -0.00263202 Jy ! Component: 1750 - total flux cleaned = -0.00253775 Jy ! Component: 1800 - total flux cleaned = -0.00239688 Jy ! Component: 1850 - total flux cleaned = -0.00244382 Jy ! Component: 1900 - total flux cleaned = -0.00249038 Jy ! Component: 1950 - total flux cleaned = -0.00235167 Jy ! Component: 2000 - total flux cleaned = -0.00239775 Jy ! Component: 2050 - total flux cleaned = -0.00230624 Jy ! Component: 2100 - total flux cleaned = -0.00235199 Jy ! Component: 2150 - total flux cleaned = -0.00226157 Jy ! Component: 2200 - total flux cleaned = -0.00221684 Jy ! Component: 2250 - total flux cleaned = -0.00230647 Jy ! Component: 2300 - total flux cleaned = -0.00244033 Jy ! Component: 2350 - total flux cleaned = -0.00221821 Jy ! Component: 2400 - total flux cleaned = -0.00208552 Jy ! Component: 2450 - total flux cleaned = -0.00199786 Jy ! Component: 2500 - total flux cleaned = -0.00221706 Jy ! Component: 2550 - total flux cleaned = -0.00195551 Jy ! Component: 2600 - total flux cleaned = -0.00186878 Jy ! Component: 2650 - total flux cleaned = -0.00191183 Jy ! Component: 2700 - total flux cleaned = -0.00182584 Jy ! Component: 2750 - total flux cleaned = -0.00156901 Jy ! Component: 2800 - total flux cleaned = -0.0016546 Jy ! Component: 2850 - total flux cleaned = -0.00173956 Jy ! Component: 2900 - total flux cleaned = -0.00165497 Jy ! Component: 2950 - total flux cleaned = -0.00178107 Jy ! Component: 3000 - total flux cleaned = -0.00165521 Jy ! Component: 3050 - total flux cleaned = -0.00148807 Jy ! Component: 3100 - total flux cleaned = -0.00165428 Jy ! Component: 3150 - total flux cleaned = -0.00161251 Jy ! Component: 3200 - total flux cleaned = -0.00136481 Jy ! Component: 3250 - total flux cleaned = -0.00157049 Jy ! Component: 3300 - total flux cleaned = -0.00148885 Jy ! Component: 3350 - total flux cleaned = -0.00169294 Jy ! Component: 3400 - total flux cleaned = -0.00140837 Jy ! Component: 3450 - total flux cleaned = -0.00140833 Jy ! Component: 3500 - total flux cleaned = -0.00148893 Jy ! Component: 3550 - total flux cleaned = -0.00160953 Jy ! Component: 3600 - total flux cleaned = -0.00128879 Jy ! Component: 3650 - total flux cleaned = -0.00136838 Jy ! Component: 3700 - total flux cleaned = -0.00128876 Jy ! Component: 3750 - total flux cleaned = -0.00124894 Jy ! Component: 3800 - total flux cleaned = -0.00128843 Jy ! Component: 3850 - total flux cleaned = -0.00120985 Jy ! Component: 3900 - total flux cleaned = -0.000974377 Jy ! Component: 3950 - total flux cleaned = -0.0011306 Jy ! Component: 4000 - total flux cleaned = -0.00109158 Jy ! Component: 4050 - total flux cleaned = -0.00093636 Jy ! Total flux subtracted in 4096 components = -0.000936327 Jy ! Clean residual min=-0.002128 max=0.002047 Jy/beam ! Clean residual mean=0.000001 rms=0.000691 Jy/beam ! Combined flux in latest and established models = 0.684314 Jy keep ! Adding 367 model components to the UV plane model. ! The established model now contains 552 components and 0.684314 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv123_uvs/J0808+4052_S_map.fits ! Inverting map ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 2.576 x 2.91 at 7.49 degrees (North through East) ! Clean map min=-0.003637 max=0.52405 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv123_uvs/J0808+4052_S_map.fits wmodel /scr/pima/rv123_uvs/J0808+4052_S_map.mod ! Writing 552 model components to file: /scr/pima/rv123_uvs/J0808+4052_S_map.mod wobs /scr/pima/rv123_uvs/J0808+4052_S_uvs.fits ! Writing UV FITS file: /scr/pima/rv123_uvs/J0808+4052_S_uvs.fits wwins /scr/pima/rv123_uvs/J0808+4052_S_map.win ! wwins: Wrote 8 windows to /scr/pima/rv123_uvs/J0808+4052_S_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.524049 invert ! Inverting map float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.00068923 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.39456 0.39456 0.789121 1.57824 3.15648 6.31297 12.6259 25.2519 50.5037 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.002 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.524 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 760.339 quit ! Quitting program ! Log file /scr/pima/rv123_uvs/J0808+4052_S_dfm.log closed on Sun Dec 23 05:02:35 2018