! Started logfile: /scr/pima/rv123_uvs/J0648-3044_X_dfm.log on Sun Dec 23 00:40:48 2018 float field_size field_size = 1024 float field_cell field_cell = 0.2000 float taper_size taper_size = 70.0 float freq freq = 8.36575 obs /scr/pima/rv123_uvs/J0648-3044_X_uva.fits ! Reading UV FITS file: /scr/pima/rv123_uvs/J0648-3044_X_uva.fits ! AN table 1: 3 integrations on 36 of 36 possible baselines. ! AN table 2: 13 integrations on 15 of 15 possible baselines. ! AN table 3: 5 integrations on 3 of 3 possible baselines. ! AN table 4: 3 integrations on 6 of 6 possible baselines. ! AN table 5: 14 integrations on 28 of 28 possible baselines. ! Apparent sampling: 0.773352 visibilities/baseline/integration-bin. ! Found source: J0648-3044 ! ! There are 4 IFs, and a total of 4 channels: ! ! IF Channel Frequency Freq offset Number of Overall IF ! origin at origin per channel channels bandwidth ! ------------------------------------------------------------- (Hz) ! 01 1 8.36575e+09 8e+06 1 8e+06 ! 02 2 8.44575e+09 8e+06 1 8e+06 ! 03 3 8.80575e+09 8e+06 1 8e+06 ! 04 4 8.92575e+09 8e+06 1 8e+06 ! ! Polarization(s): RR ! ! Read 89 lines of history. ! ! Reading 2252 visibilities. select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 ! Restricting channel ranges to the available 4 channels. ! Selecting polarization: RR, channels: 1..4 ! Reading IF 1 channels: 1..1 ! Reading IF 2 channels: 2..2 ! Reading IF 3 channels: 3..3 ! Reading IF 4 channels: 4..4 print "field_size =", field_size ! field_size = 1024 print "field_cell =", field_cell ! field_cell = 0.2 print "taper_size =", taper_size ! taper_size = 70 ![@/opt64/bin/pima_mupet_01.dfm J0648-3044_X] float lim_self lim_self = 120.0 float lim_val lim_va = 1.2 integer clean_niter clean_niter = 100 float clean_gain clean_gain = 0.03 float dynam dynam = 6.0 float soltime1 soltime1 = 120 float soltime2 soltime2 = 20 float thresh thresh = 0.5 float win_mult win_mult = 1.8 float time_av time_av = 16 float old_peak float new_peak float flux_cutoff print "===============================================================" ! =============================================================== ! print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === " ! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 === ! mapsize field_size, field_cell ! Map grid = 1024x1024 pixels with 0.200x0.200 milli-arcsec cellsize. startmod ! Applying default point source starting model. ! Performing phase self-cal ! Adding 1 model components to the UV plane model. ! The established model now contains 1 components and 1 Jy ! ! Correcting IF 1. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 26 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 2. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 26 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 3. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 26 telescope corrections were flagged in sub-array 5. ! ! Correcting IF 4. ! A total of 9 telescope corrections were flagged in sub-array 1. ! A total of 27 telescope corrections were flagged in sub-array 2. ! A total of 9 telescope corrections were flagged in sub-array 3. ! A total of 4 telescope corrections were flagged in sub-array 4. ! A total of 26 telescope corrections were flagged in sub-array 5. ! ! Fit before self-cal, rms=1.195512Jy sigma=15.533737 ! Fit after self-cal, rms=0.446951Jy sigma=4.847184 ! clrmod: Cleared the established, tentative and continuum models. ! Redundant starting model cleared. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.59% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Estimated beam: bmin=0.6972 mas, bmaj=1.482 mas, bpa=-6.913 degrees ! Estimated noise=1.98556 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (0, 0). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.456747 Jy ! Component: 100 - total flux cleaned = 0.579524 Jy ! Total flux subtracted in 100 components = 0.579524 Jy ! Clean residual min=-0.033012 max=0.056354 Jy/beam ! Clean residual mean=-0.000133 rms=0.006424 Jy/beam ! Combined flux in latest and established models = 0.579524 Jy ! Performing phase self-cal ! Adding 10 model components to the UV plane model. ! The established model now contains 10 components and 0.579524 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.197141Jy sigma=2.385862 ! Fit after self-cal, rms=0.197015Jy sigma=2.385167 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Added new window around map position (1.4, -1.8). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0603096 Jy ! Component: 100 - total flux cleaned = 0.0960401 Jy ! Total flux subtracted in 100 components = 0.0960401 Jy ! Clean residual min=-0.027528 max=0.042029 Jy/beam ! Clean residual mean=-0.000077 rms=0.005059 Jy/beam ! Combined flux in latest and established models = 0.675564 Jy ! Performing phase self-cal ! Adding 8 model components to the UV plane model. ! The established model now contains 14 components and 0.675564 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.162654Jy sigma=1.834209 ! Fit after self-cal, rms=0.161956Jy sigma=1.823280 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Added new window around map position (0.8, 2.2). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0373844 Jy ! Component: 100 - total flux cleaned = 0.0585637 Jy ! Total flux subtracted in 100 components = 0.0585637 Jy ! Clean residual min=-0.022330 max=0.033099 Jy/beam ! Clean residual mean=-0.000044 rms=0.004468 Jy/beam ! Combined flux in latest and established models = 0.734128 Jy ! Performing phase self-cal ! Adding 9 model components to the UV plane model. ! The established model now contains 21 components and 0.734128 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.146824Jy sigma=1.591101 ! Fit after self-cal, rms=0.146345Jy sigma=1.577628 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Added new window around map position (-1.8, 0.4). ! clean: niter=100 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0272433 Jy ! Component: 100 - total flux cleaned = 0.0438653 Jy ! Total flux subtracted in 100 components = 0.0438653 Jy ! Clean residual min=-0.018061 max=0.021577 Jy/beam ! Clean residual mean=-0.000020 rms=0.004121 Jy/beam ! Combined flux in latest and established models = 0.777993 Jy ! Performing phase self-cal ! Adding 12 model components to the UV plane model. ! The established model now contains 29 components and 0.777993 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.136950Jy sigma=1.451812 ! Fit after self-cal, rms=0.136574Jy sigma=1.446367 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec print "============== Finished uniform weighting clean ===============" ! ============== Finished uniform weighting clean =============== ! uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. win_mult = win_mult * 1.6 clean_niter = clean_niter * 2 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.59% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Estimated beam: bmin=0.9019 mas, bmaj=2.069 mas, bpa=-5.975 degrees ! Estimated noise=1.39791 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0260215 Jy ! Component: 100 - total flux cleaned = 0.0428446 Jy ! Component: 150 - total flux cleaned = 0.0546664 Jy ! Component: 200 - total flux cleaned = 0.0631841 Jy ! Total flux subtracted in 200 components = 0.0631841 Jy ! Clean residual min=-0.019903 max=0.020054 Jy/beam ! Clean residual mean=0.000052 rms=0.005006 Jy/beam ! Combined flux in latest and established models = 0.841177 Jy ! Performing phase self-cal ! Adding 22 model components to the UV plane model. ! The established model now contains 42 components and 0.841177 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.130122Jy sigma=1.355873 ! Fit after self-cal, rms=0.130015Jy sigma=1.355022 ! Inverting map ! Your choice of large map pixels excluded 2.59% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec print "============== Finished natural weighting clean ==============" ! ============== Finished natural weighting clean ============== ! restore ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9019 x 2.069 at -5.975 degrees (North through East) ! Clean map min=-0.019381 max=0.5843 Jy/beam gscale true ! Performing overall amplitude self-cal ! ! Correcting IF 1. ! Telescope amplitude corrections in sub-array 1: ! BR 1.06 FD 0.99 HN 1.36 LA 1.02 ! MK 0.99 NL 1.00 OV 0.95 PT 0.91 ! SC 1.01 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.93 KP 1.08 LA 1.04 MK 0.96 ! OV 0.96 YG 1.53 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.82 HH 0.75 HN 1.19 SC 0.82 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.91 HN 1.05 KP 1.05 LA 1.03 ! NL 1.02 OV 1.03 PT 0.92 SC 0.98 ! ! ! Correcting IF 2. ! Telescope amplitude corrections in sub-array 1: ! BR 1.04 FD 0.96 HN 1.37 LA 1.06 ! MK 1.02 NL 0.98 OV 0.95 PT 0.89 ! SC 0.98 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.92 KP 1.11 LA 1.09 MK 0.93 ! OV 0.95 YG 1.63 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.33 HH 0.78 HN 1.50 SC 0.91 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.92 HN 1.11 KP 1.07 LA 1.05 ! NL 1.01 OV 1.03 PT 0.92 SC 0.98 ! ! ! Correcting IF 3. ! Telescope amplitude corrections in sub-array 1: ! BR 1.09 FD 0.96 HN 1.34 LA 1.05 ! MK 1.00 NL 1.02 OV 0.92 PT 0.90 ! SC 0.99 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.87 KP 1.13 LA 1.10 MK 0.97 ! OV 0.93 YG 1.94 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.60 HH 1.22 HN 1.26 SC 0.77 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.93 HN 1.13 KP 1.09 LA 1.05 ! NL 1.02 OV 1.01 PT 0.93 SC 1.00 ! ! ! Correcting IF 4. ! Telescope amplitude corrections in sub-array 1: ! BR 1.05 FD 0.98 HN 1.22 LA 1.03 ! MK 1.02 NL 1.04 OV 0.91 PT 0.91 ! SC 0.95 ! ! A total of 9 telescope corrections were flagged in sub-array 2. ! Telescope amplitude corrections in sub-array 2: ! FD 0.94 KP 1.13 LA 1.07 MK 0.99 ! OV 0.91 YG 2.24 ! ! A total of 6 telescope corrections were flagged in sub-array 3. ! Telescope amplitude corrections in sub-array 3: ! HH 0.00* SC 0.00* WZ 0.00* ! ! Telescope amplitude corrections in sub-array 4: ! FD 1.90 HH 0.83 HN 1.25 SC 0.92 ! ! Telescope amplitude corrections in sub-array 5: ! FD 0.94 HN 1.21 KP 1.07 LA 1.05 ! NL 0.99 OV 1.03 PT 0.92 SC 0.98 ! ! ! Fit before self-cal, rms=0.130015Jy sigma=1.355022 ! Fit after self-cal, rms=0.124742Jy sigma=1.088575 dynam = dynam - 0.5 flux_cutoff = imstat(rms) * dynam ! Inverting map and beam ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Estimated beam: bmin=0.9374 mas, bmaj=2.358 mas, bpa=-4.146 degrees ! Estimated noise=1.42979 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! Added new window around map position (2.8, -0.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00965026 Jy ! Component: 100 - total flux cleaned = 0.0113474 Jy ! Component: 150 - total flux cleaned = 0.0123752 Jy ! Component: 200 - total flux cleaned = 0.0129305 Jy ! Total flux subtracted in 200 components = 0.0129305 Jy ! Clean residual min=-0.011817 max=0.009598 Jy/beam ! Clean residual mean=0.000013 rms=0.002476 Jy/beam ! Combined flux in latest and established models = 0.854107 Jy ! Performing phase self-cal ! Adding 26 model components to the UV plane model. ! The established model now contains 67 components and 0.854107 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120653Jy sigma=1.043256 ! Fit after self-cal, rms=0.120526Jy sigma=1.039466 ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec selfcal true, true, soltime1 ! Performing amp+phase self-cal over 120 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.120526Jy sigma=1.039466 ! Fit after self-cal, rms=0.119402Jy sigma=1.017923 dynam = dynam - 0.75 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Estimated beam: bmin=0.9379 mas, bmaj=2.347 mas, bpa=-4.067 degrees ! Estimated noise=1.4225 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000953942 Jy ! Component: 100 - total flux cleaned = 0.00154648 Jy ! Component: 150 - total flux cleaned = 0.00203139 Jy ! Component: 200 - total flux cleaned = 0.00243561 Jy ! Total flux subtracted in 200 components = 0.00243561 Jy ! Clean residual min=-0.010353 max=0.008446 Jy/beam ! Clean residual mean=0.000014 rms=0.002147 Jy/beam ! Combined flux in latest and established models = 0.856543 Jy selfcal ! Performing phase self-cal ! Adding 23 model components to the UV plane model. ! The established model now contains 76 components and 0.856543 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.117561Jy sigma=1.001993 ! Fit after self-cal, rms=0.117479Jy sigma=1.000859 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00113022 Jy ! Component: 100 - total flux cleaned = 0.00130762 Jy ! Component: 150 - total flux cleaned = 0.00146061 Jy ! Component: 200 - total flux cleaned = 0.00159874 Jy ! Total flux subtracted in 200 components = 0.00159874 Jy ! Clean residual min=-0.009770 max=0.008140 Jy/beam ! Clean residual mean=0.000015 rms=0.002108 Jy/beam ! Combined flux in latest and established models = 0.858142 Jy ! Performing phase self-cal ! Adding 18 model components to the UV plane model. ! The established model now contains 77 components and 0.858142 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116760Jy sigma=0.995251 ! Fit after self-cal, rms=0.116692Jy sigma=0.994789 ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.116692Jy sigma=0.994789 ! Fit after self-cal, rms=0.114604Jy sigma=0.951692 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Estimated beam: bmin=0.9373 mas, bmaj=2.336 mas, bpa=-3.953 degrees ! Estimated noise=1.42176 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00209854 Jy ! Component: 100 - total flux cleaned = -0.00208318 Jy ! Component: 150 - total flux cleaned = -0.00173713 Jy ! Component: 200 - total flux cleaned = -0.00143802 Jy ! Total flux subtracted in 200 components = -0.00143802 Jy ! Clean residual min=-0.008238 max=0.007851 Jy/beam ! Clean residual mean=0.000008 rms=0.001711 Jy/beam ! Combined flux in latest and established models = 0.856704 Jy selfcal ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 79 components and 0.856704 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113610Jy sigma=0.943508 ! Fit after self-cal, rms=0.113582Jy sigma=0.942926 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000649784 Jy ! Component: 100 - total flux cleaned = 0.000895436 Jy ! Component: 150 - total flux cleaned = 0.00089677 Jy ! Component: 200 - total flux cleaned = 0.000998287 Jy ! Total flux subtracted in 200 components = 0.000998287 Jy ! Clean residual min=-0.007777 max=0.007311 Jy/beam ! Clean residual mean=0.000009 rms=0.001686 Jy/beam ! Combined flux in latest and established models = 0.857702 Jy ! Performing phase self-cal ! Adding 20 model components to the UV plane model. ! The established model now contains 87 components and 0.857702 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113088Jy sigma=0.940232 ! Fit after self-cal, rms=0.113062Jy sigma=0.939932 ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. win_mult = win_mult * 1.2 selfcal true, true, soltime2 ! Performing amp+phase self-cal over 20 minute time intervals ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.113062Jy sigma=0.939932 ! Fit after self-cal, rms=0.112653Jy sigma=0.937286 clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Estimated beam: bmin=2.188 mas, bmaj=5.749 mas, bpa=-5.292 degrees ! Estimated noise=1.68979 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00197984 Jy ! Component: 100 - total flux cleaned = -0.00250737 Jy ! Component: 150 - total flux cleaned = -0.00259553 Jy ! Component: 200 - total flux cleaned = -0.00259729 Jy ! Total flux subtracted in 200 components = -0.00259729 Jy ! Clean residual min=-0.009128 max=0.007886 Jy/beam ! Clean residual mean=0.000021 rms=0.002058 Jy/beam ! Combined flux in latest and established models = 0.855105 Jy selfcal ! Performing phase self-cal ! Adding 16 model components to the UV plane model. ! The established model now contains 97 components and 0.855105 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112409Jy sigma=0.934912 ! Fit after self-cal, rms=0.112407Jy sigma=0.934714 flux_cutoff = imstat(rms) * dynam ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000142629 Jy ! Component: 100 - total flux cleaned = 0.000135594 Jy ! Component: 150 - total flux cleaned = 0.000133386 Jy ! Component: 200 - total flux cleaned = 0.000132664 Jy ! Total flux subtracted in 200 components = 0.000132664 Jy ! Clean residual min=-0.009050 max=0.007815 Jy/beam ! Clean residual mean=0.000020 rms=0.002052 Jy/beam ! Combined flux in latest and established models = 0.855238 Jy ! Performing phase self-cal ! Adding 15 model components to the UV plane model. ! The established model now contains 101 components and 0.855238 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112267Jy sigma=0.934252 ! Fit after self-cal, rms=0.112265Jy sigma=0.934083 ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. win_mult = win_mult / 1.2 print "============== Finished amplitude self-cal ==============" ! ============== Finished amplitude self-cal ============== restore ! Inverting map and beam ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Estimated beam: bmin=0.9362 mas, bmaj=2.327 mas, bpa=-3.883 degrees ! Estimated noise=1.42049 mJy/beam. ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9362 x 2.327 at -3.883 degrees (North through East) ! Clean map min=-0.0070909 max=0.598 Jy/beam if(peak(flux) > thresh) selfcal true, true clean clean_niter,clean_gain selfcal flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam selfcal new_peak = peak(flux) until(new_peak<=flux_cutoff) selfcal true, true end if ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.112265Jy sigma=0.934083 ! Fit after self-cal, rms=0.108612Jy sigma=0.840159 ! Inverting map and beam ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Estimated beam: bmin=0.9368 mas, bmaj=2.324 mas, bpa=-3.857 degrees ! Estimated noise=1.41943 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.00298792 Jy ! Component: 100 - total flux cleaned = -0.00324087 Jy ! Component: 150 - total flux cleaned = -0.00324433 Jy ! Component: 200 - total flux cleaned = -0.00314893 Jy ! Total flux subtracted in 200 components = -0.00314893 Jy ! Clean residual min=-0.006771 max=0.006627 Jy/beam ! Clean residual mean=0.000011 rms=0.001542 Jy/beam ! Combined flux in latest and established models = 0.852089 Jy ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 107 components and 0.852089 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.108177Jy sigma=0.836537 ! Fit after self-cal, rms=0.108164Jy sigma=0.836376 ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 2.4769e-05 Jy ! Component: 100 - total flux cleaned = -0.000135846 Jy ! Component: 150 - total flux cleaned = -0.00021237 Jy ! Component: 200 - total flux cleaned = -0.000284298 Jy ! Total flux subtracted in 200 components = -0.000284298 Jy ! Clean residual min=-0.006396 max=0.006646 Jy/beam ! Clean residual mean=0.000011 rms=0.001532 Jy/beam ! Combined flux in latest and established models = 0.851804 Jy ! Performing phase self-cal ! Adding 21 model components to the UV plane model. ! The established model now contains 113 components and 0.851804 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107953Jy sigma=0.835064 ! Fit after self-cal, rms=0.107937Jy sigma=0.834978 ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Added new window around map position (7, 5.6). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00411955 Jy ! Component: 100 - total flux cleaned = 0.00446291 Jy ! Component: 150 - total flux cleaned = 0.00386319 Jy ! Component: 200 - total flux cleaned = 0.00376124 Jy ! Total flux subtracted in 200 components = 0.00376124 Jy ! Clean residual min=-0.006141 max=0.006000 Jy/beam ! Clean residual mean=0.000011 rms=0.001431 Jy/beam ! Combined flux in latest and established models = 0.855566 Jy ! Performing phase self-cal ! Adding 13 model components to the UV plane model. ! The established model now contains 125 components and 0.855566 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107228Jy sigma=0.827852 ! Fit after self-cal, rms=0.107255Jy sigma=0.827187 ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Performing amp+phase self-cal ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.107255Jy sigma=0.827187 ! Fit after self-cal, rms=0.107175Jy sigma=0.825024 print "============== Clearing model and starting over ==========" ! ============== Clearing model and starting over ========== clrmod true ! clrmod: Cleared the established and tentative models. uvw 2,-1 ! Uniform weighting binwidth: 2 (pixels). ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Estimated beam: bmin=0.7156 mas, bmaj=1.616 mas, bpa=-4.909 degrees ! Estimated noise=2.05321 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.466542 Jy ! Component: 100 - total flux cleaned = 0.58567 Jy ! Component: 150 - total flux cleaned = 0.641245 Jy ! Component: 200 - total flux cleaned = 0.67877 Jy ! Total flux subtracted in 200 components = 0.67877 Jy ! Clean residual min=-0.016608 max=0.023496 Jy/beam ! Clean residual mean=-0.000069 rms=0.003451 Jy/beam ! Combined flux in latest and established models = 0.67877 Jy uvw 0,-1 ! Uniform weighting is not currently selected. ! Gridding weights will be scaled by errors raised to the power -1. ! Radial weighting is not currently selected. flux_cutoff = imstat(rms) * dynam ! Adding 28 model components to the UV plane model. ! The established model now contains 28 components and 0.67877 Jy ! Inverting map and beam ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Estimated beam: bmin=0.9363 mas, bmaj=2.315 mas, bpa=-3.813 degrees ! Estimated noise=1.41915 mJy/beam. repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0523959 Jy ! Component: 100 - total flux cleaned = 0.0863812 Jy ! Component: 150 - total flux cleaned = 0.109993 Jy ! Component: 200 - total flux cleaned = 0.126897 Jy ! Total flux subtracted in 200 components = 0.126897 Jy ! Clean residual min=-0.008148 max=0.011998 Jy/beam ! Clean residual mean=-0.000026 rms=0.002552 Jy/beam ! Combined flux in latest and established models = 0.805667 Jy ! Adding 33 model components to the UV plane model. ! The established model now contains 50 components and 0.805667 Jy ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Added new window around map position (18.8, 36.8). ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.0131053 Jy ! Component: 100 - total flux cleaned = 0.0228529 Jy ! Component: 150 - total flux cleaned = 0.0303853 Jy ! Component: 200 - total flux cleaned = 0.0347822 Jy ! Total flux subtracted in 200 components = 0.0347822 Jy ! Clean residual min=-0.006534 max=0.006033 Jy/beam ! Clean residual mean=-0.000000 rms=0.001533 Jy/beam ! Combined flux in latest and established models = 0.840449 Jy ! Adding 35 model components to the UV plane model. ! The established model now contains 68 components and 0.84045 Jy ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec uvtaper 0.3,taper_size ! Gaussian taper: value 0.3 at UV radius = 70 mega-wavelengths. clean clean_niter,clean_gain ! Inverting map and beam ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Estimated beam: bmin=2.195 mas, bmaj=5.769 mas, bpa=-5.329 degrees ! Estimated noise=1.68407 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.00611224 Jy ! Component: 100 - total flux cleaned = 0.00818434 Jy ! Component: 150 - total flux cleaned = 0.00963565 Jy ! Component: 200 - total flux cleaned = 0.0108946 Jy ! Total flux subtracted in 200 components = 0.0108946 Jy ! Clean residual min=-0.007837 max=0.005574 Jy/beam ! Clean residual mean=0.000022 rms=0.001615 Jy/beam ! Combined flux in latest and established models = 0.851344 Jy flux_cutoff = imstat(rms) * dynam repeat if (peak(flux) > flux_cutoff) peakwin win_mult clean clean_niter,clean_gain flux_cutoff = imstat(rms) * dynam keep new_peak = peak(flux) until(new_peak<=flux_cutoff) ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = 0.000823128 Jy ! Component: 100 - total flux cleaned = 0.00121035 Jy ! Component: 150 - total flux cleaned = 0.00141995 Jy ! Component: 200 - total flux cleaned = 0.00167452 Jy ! Total flux subtracted in 200 components = 0.00167452 Jy ! Clean residual min=-0.007872 max=0.005677 Jy/beam ! Clean residual mean=0.000026 rms=0.001593 Jy/beam ! Combined flux in latest and established models = 0.853019 Jy ! Adding 43 model components to the UV plane model. ! The established model now contains 108 components and 0.853019 Jy ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec uvtaper 0,0 ! No UV-taper is currently set. clean ! Inverting map and beam ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! Estimated beam: bmin=0.9363 mas, bmaj=2.315 mas, bpa=-3.813 degrees ! Estimated noise=1.41915 mJy/beam. ! clean: niter=200 gain=0.03 cutoff=0 ! Component: 050 - total flux cleaned = -0.000111895 Jy ! Component: 100 - total flux cleaned = -0.000109264 Jy ! Component: 150 - total flux cleaned = -4.432e-07 Jy ! Component: 200 - total flux cleaned = 2.33503e-06 Jy ! Total flux subtracted in 200 components = 2.33503e-06 Jy ! Clean residual min=-0.006002 max=0.005464 Jy/beam ! Clean residual mean=0.000014 rms=0.001336 Jy/beam ! Combined flux in latest and established models = 0.853021 Jy selfcal ! Performing phase self-cal ! Adding 17 model components to the UV plane model. ! The established model now contains 116 components and 0.853021 Jy ! ! Correcting IF 1. ! ! Correcting IF 2. ! ! Correcting IF 3. ! ! Correcting IF 4. ! ! Fit before self-cal, rms=0.109050Jy sigma=0.826572 ! Fit after self-cal, rms=0.108726Jy sigma=0.824616 wmodel J0648-3044_X_map.mod ! Writing 116 model components to file: J0648-3044_X_map.mod wobs J0648-3044_X_uvs.fits ! Writing UV FITS file: J0648-3044_X_uvs.fits wwins J0648-3044_X_map.win ! wwins: Wrote 7 windows to J0648-3044_X_map.win x = (field_size-8) * field_cell / 4 addwin -x,x,-x,x clean (field_size*4),0.01 ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! clean: niter=4096 gain=0.01 cutoff=0 ! Component: 050 - total flux cleaned = -0.00232413 Jy ! Component: 100 - total flux cleaned = -0.00331439 Jy ! Component: 150 - total flux cleaned = -0.00425295 Jy ! Component: 200 - total flux cleaned = -0.00470347 Jy ! Component: 250 - total flux cleaned = -0.00557373 Jy ! Component: 300 - total flux cleaned = -0.00607753 Jy ! Component: 350 - total flux cleaned = -0.00640462 Jy ! Component: 400 - total flux cleaned = -0.0071252 Jy ! Component: 450 - total flux cleaned = -0.00759471 Jy ! Component: 500 - total flux cleaned = -0.00805471 Jy ! Component: 550 - total flux cleaned = -0.00835582 Jy ! Component: 600 - total flux cleaned = -0.00865122 Jy ! Component: 650 - total flux cleaned = -0.00901524 Jy ! Component: 700 - total flux cleaned = -0.00944464 Jy ! Component: 750 - total flux cleaned = -0.00965615 Jy ! Component: 800 - total flux cleaned = -0.0100034 Jy ! Component: 850 - total flux cleaned = -0.0102084 Jy ! Component: 900 - total flux cleaned = -0.010208 Jy ! Component: 950 - total flux cleaned = -0.0106063 Jy ! Component: 1000 - total flux cleaned = -0.0106056 Jy ! Component: 1050 - total flux cleaned = -0.0109292 Jy ! Component: 1100 - total flux cleaned = -0.0109919 Jy ! Component: 1150 - total flux cleaned = -0.0109924 Jy ! Component: 1200 - total flux cleaned = -0.011306 Jy ! Component: 1250 - total flux cleaned = -0.0114922 Jy ! Component: 1300 - total flux cleaned = -0.0116154 Jy ! Component: 1350 - total flux cleaned = -0.0116153 Jy ! Component: 1400 - total flux cleaned = -0.0117349 Jy ! Component: 1450 - total flux cleaned = -0.0116742 Jy ! Component: 1500 - total flux cleaned = -0.0116144 Jy ! Component: 1550 - total flux cleaned = -0.0116725 Jy ! Component: 1600 - total flux cleaned = -0.0117877 Jy ! Component: 1650 - total flux cleaned = -0.0119017 Jy ! Component: 1700 - total flux cleaned = -0.0118435 Jy ! Component: 1750 - total flux cleaned = -0.0120121 Jy ! Component: 1800 - total flux cleaned = -0.0122359 Jy ! Component: 1850 - total flux cleaned = -0.0122916 Jy ! Component: 1900 - total flux cleaned = -0.0124565 Jy ! Component: 1950 - total flux cleaned = -0.012456 Jy ! Component: 2000 - total flux cleaned = -0.0124021 Jy ! Component: 2050 - total flux cleaned = -0.0124559 Jy ! Component: 2100 - total flux cleaned = -0.0125089 Jy ! Component: 2150 - total flux cleaned = -0.0126154 Jy ! Component: 2200 - total flux cleaned = -0.0127194 Jy ! Component: 2250 - total flux cleaned = -0.0127198 Jy ! Component: 2300 - total flux cleaned = -0.0129273 Jy ! Component: 2350 - total flux cleaned = -0.0131332 Jy ! Component: 2400 - total flux cleaned = -0.0130825 Jy ! Component: 2450 - total flux cleaned = -0.0131339 Jy ! Component: 2500 - total flux cleaned = -0.0134368 Jy ! Component: 2550 - total flux cleaned = -0.013587 Jy ! Component: 2600 - total flux cleaned = -0.0136866 Jy ! Component: 2650 - total flux cleaned = -0.0135872 Jy ! Component: 2700 - total flux cleaned = -0.0135879 Jy ! Component: 2750 - total flux cleaned = -0.0136856 Jy ! Component: 2800 - total flux cleaned = -0.013879 Jy ! Component: 2850 - total flux cleaned = -0.0137346 Jy ! Component: 2900 - total flux cleaned = -0.0137341 Jy ! Component: 2950 - total flux cleaned = -0.0135919 Jy ! Component: 3000 - total flux cleaned = -0.0135918 Jy ! Component: 3050 - total flux cleaned = -0.0134509 Jy ! Component: 3100 - total flux cleaned = -0.0137309 Jy ! Component: 3150 - total flux cleaned = -0.013545 Jy ! Component: 3200 - total flux cleaned = -0.0136377 Jy ! Component: 3250 - total flux cleaned = -0.0135916 Jy ! Component: 3300 - total flux cleaned = -0.0135006 Jy ! Component: 3350 - total flux cleaned = -0.013501 Jy ! Component: 3400 - total flux cleaned = -0.0136812 Jy ! Component: 3450 - total flux cleaned = -0.013771 Jy ! Component: 3500 - total flux cleaned = -0.0137712 Jy ! Component: 3550 - total flux cleaned = -0.0139933 Jy ! Component: 3600 - total flux cleaned = -0.0139486 Jy ! Component: 3650 - total flux cleaned = -0.0140368 Jy ! Component: 3700 - total flux cleaned = -0.0140805 Jy ! Component: 3750 - total flux cleaned = -0.0140806 Jy ! Component: 3800 - total flux cleaned = -0.0139073 Jy ! Component: 3850 - total flux cleaned = -0.0140799 Jy ! Component: 3900 - total flux cleaned = -0.0140798 Jy ! Component: 3950 - total flux cleaned = -0.0142081 Jy ! Component: 4000 - total flux cleaned = -0.0143358 Jy ! Component: 4050 - total flux cleaned = -0.0142507 Jy ! Total flux subtracted in 4096 components = -0.0141661 Jy ! Clean residual min=-0.002668 max=0.002553 Jy/beam ! Clean residual mean=-0.000001 rms=0.000724 Jy/beam ! Combined flux in latest and established models = 0.838855 Jy keep ! Adding 266 model components to the UV plane model. ! The established model now contains 382 components and 0.838855 Jy ![Exited script file: /opt64/bin/pima_mupet_01.dfm] wmap /scr/pima/rv123_uvs/J0648-3044_X_map.fits ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec ! restore: Substituting estimate of restoring beam from last 'invert'. ! Restoring with beam: 0.9363 x 2.315 at -3.813 degrees (North through East) ! Clean map min=-0.0064985 max=0.60204 Jy/beam ! Writing clean map to FITS file: /scr/pima/rv123_uvs/J0648-3044_X_map.fits wmodel /scr/pima/rv123_uvs/J0648-3044_X_map.mod ! Writing 382 model components to file: /scr/pima/rv123_uvs/J0648-3044_X_map.mod wobs /scr/pima/rv123_uvs/J0648-3044_X_uvs.fits ! Writing UV FITS file: /scr/pima/rv123_uvs/J0648-3044_X_uvs.fits wwins /scr/pima/rv123_uvs/J0648-3044_X_map.win ! wwins: Wrote 8 windows to /scr/pima/rv123_uvs/J0648-3044_X_map.win float peak_flux peak_flux = peak(flux,max) print "The peak flux is", peak_flux ! The peak flux is 0.602041 invert ! Inverting map ! Your choice of large map pixels excluded 2.44% of the data. ! The x-axis pixel size should ideally be below 0.17 milli-arcsec ! The y-axis pixel size should ideally be below 0.1984 milli-arcsec float image_rms image_rms = imstat(rms) print "The final image rms is",image_rms ! The final image rms is 0.000719526 loglevs 100*3*image_rms/peak_flux ! The new contour levels are: ! -0.358543 0.358543 0.717086 1.43417 2.86835 5.73669 11.4734 22.9468 45.8935 91.7871 print "clev= ", int(3*image_rms*10000)/10000 ! clev= 0.0021 print "peak= ", int(1000*peak_flux)/1000 ! peak= 0.602 print "dyn_range= ", int(1000*peak_flux/image_rms)/1000 ! dyn_range= 836.719 quit ! Quitting program ! Log file /scr/pima/rv123_uvs/J0648-3044_X_dfm.log closed on Sun Dec 23 00:40:52 2018