! Started logfile: /scr/pima/rv123_uvs/J0507+7912_S_dfm.log on Sun Dec 23 05:01:21 2018
float field_size
field_size =  1024
float field_cell
field_cell =   0.5000
float taper_size
taper_size =   20.0
float freq
freq       =    2.23275
obs     /scr/pima/rv123_uvs/J0507+7912_S_uva.fits
! Reading UV FITS file: /scr/pima/rv123_uvs/J0507+7912_S_uva.fits
! AN table 1: 29 integrations on 1 of 1 possible baselines.
! AN table 2: 29 integrations on 1 of 1 possible baselines.
! AN table 3: 29 integrations on 6 of 6 possible baselines.
! Apparent sampling: 1 visibilities/baseline/integration-bin.
! Found source: J0507+7912
! 
! There are 4 IFs, and a total of 4 channels:
! 
!  IF  Channel    Frequency  Freq offset  Number of   Overall IF
!       origin    at origin  per channel   channels    bandwidth
!  ------------------------------------------------------------- (Hz)
!  01        1  2.23275e+09        8e+06          1        8e+06
!  02        2  2.26275e+09        8e+06          1        8e+06
!  03        3  2.35275e+09        8e+06          1        8e+06
!  04        4  2.37275e+09        8e+06          1        8e+06
! 
! Polarization(s): RR
! 
! Read 89 lines of history.
! 
! Reading 928 visibilities.
select rr, 1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16 
! Restricting channel ranges to the available 4 channels.
! Selecting polarization: RR,  channels: 1..4
! Reading IF 1 channels: 1..1
! Reading IF 2 channels: 2..2
! Reading IF 3 channels: 3..3
! Reading IF 4 channels: 4..4
print "field_size =", field_size
! field_size = 1024 
print "field_cell =", field_cell
! field_cell = 0.5 
print "taper_size =", taper_size
! taper_size = 20 
![@/opt64/bin/pima_mupet_01.dfm J0507+7912_S]
float lim_self
lim_self = 120.0
float lim_val
lim_va   = 1.2
integer clean_niter
clean_niter = 100
float clean_gain
clean_gain = 0.03
float dynam
dynam = 6.0
float soltime1
soltime1 = 120
float soltime2
soltime2 = 20
float thresh
thresh = 0.5
float win_mult
win_mult = 1.8
float time_av
time_av = 16
float old_peak
float new_peak
float flux_cutoff
print "==============================================================="
! =============================================================== 
! 
print "=== Difmap script: pima_mupet_01.dvm version of 2016.05.19 === "
! === Difmap script: pima_mupet_01.dvm version of 2016.05.19 ===  
! 
mapsize field_size, field_cell
! Map grid = 1024x1024 pixels with 0.500x0.500 milli-arcsec cellsize.
startmod
! Applying default point source starting model.
! Performing phase self-cal
! Adding 1 model components to the UV plane model.
! The established model now contains 1 components and 1 Jy
! 
! Correcting IF 1.
!  A total of 58 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 2.
!  A total of 58 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
! 
! Correcting IF 3.
!  A total of 58 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
!  A total of 116 telescope corrections were flagged in sub-array 3.
! 
! Correcting IF 4.
!  A total of 58 telescope corrections were flagged in sub-array 1.
!  A total of 58 telescope corrections were flagged in sub-array 2.
! 
! Fit before self-cal, rms=1.004268Jy  sigma=19.526342
! Fit after  self-cal, rms=0.962763Jy  sigma=18.514261
! clrmod: Cleared the established, tentative and continuum models.
! Redundant starting model cleared.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.185 mas, bmaj=10.12 mas, bpa=73.04 degrees
! Estimated noise=2.27813 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=100  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0279053 Jy
! Component: 100  -  total flux cleaned = 0.027757 Jy
! Total flux subtracted in 100 components = 0.027757 Jy
! Clean residual min=-0.006313 max=0.006254 Jy/beam
! Clean residual mean=-0.000016 rms=0.002300 Jy/beam
! Combined flux in latest and established models = 0.027757 Jy
! Performing phase self-cal
! Adding 26 model components to the UV plane model.
! The established model now contains 26 components and 0.027757 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.080587Jy  sigma=1.115343
! Fit after  self-cal, rms=0.079976Jy  sigma=1.100425
! Inverting map 
print "============== Finished uniform weighting clean ==============="
! ============== Finished uniform weighting clean =============== 
! 
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
win_mult = win_mult * 1.6
clean_niter = clean_niter * 2
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.492 mas, bmaj=9.932 mas, bpa=72.36 degrees
! Estimated noise=1.63638 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.0015293 Jy
! Component: 100  -  total flux cleaned = -0.00243924 Jy
! Component: 150  -  total flux cleaned = -0.00165381 Jy
! Component: 200  -  total flux cleaned = -0.000129587 Jy
! Total flux subtracted in 200 components = -0.000129587 Jy
! Clean residual min=-0.004047 max=0.004062 Jy/beam
! Clean residual mean=-0.000017 rms=0.001914 Jy/beam
! Combined flux in latest and established models = 0.0276275 Jy
! Performing phase self-cal
! Adding 72 model components to the UV plane model.
! The established model now contains 95 components and 0.0276274 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.077294Jy  sigma=1.061358
! Fit after  self-cal, rms=0.076939Jy  sigma=1.058078
! Inverting map 
print "============== Finished natural weighting clean =============="
! ============== Finished natural weighting clean ============== 
! 
restore
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.492 x 9.932 at 72.36 degrees (North through East)
! Clean map  min=-0.0073274  max=0.030918 Jy/beam
gscale true
! Performing overall amplitude self-cal
! 
! Correcting IF 1.
!  Telescope amplitude corrections in sub-array 1:
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.13     HN        1.11     MK        0.79     PT        0.88     
! 
! 
! Correcting IF 2.
!  Telescope amplitude corrections in sub-array 1:
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.17     HN        1.15     MK        0.74     PT        0.81     
! 
! 
! Correcting IF 3.
!  Telescope amplitude corrections in sub-array 1:
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        0.00*    HN        0.00*    MK        0.00*    PT        0.00*    
! 
! 
! Correcting IF 4.
!  Telescope amplitude corrections in sub-array 1:
!   OV        0.00*    PT        0.00*    
! 
!  Telescope amplitude corrections in sub-array 2:
!   HN        0.00*    NL        0.00*    
! 
!  Telescope amplitude corrections in sub-array 3:
!   BR        1.01     HN        1.01     MK        0.83     PT        0.95     
! 
! 
! Fit before self-cal, rms=0.076939Jy  sigma=1.058078
! Fit after  self-cal, rms=0.054805Jy  sigma=1.044067
dynam = dynam - 0.5
flux_cutoff = imstat(rms) * dynam
! Inverting map and beam 
! Estimated beam: bmin=2.442 mas, bmaj=9.755 mas, bpa=73.57 degrees
! Estimated noise=1.48291 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00173995 Jy
! Component: 100  -  total flux cleaned = 0.00226246 Jy
! Component: 150  -  total flux cleaned = 0.00298969 Jy
! Component: 200  -  total flux cleaned = 0.00339575 Jy
! Total flux subtracted in 200 components = 0.00339575 Jy
! Clean residual min=-0.002126 max=0.002129 Jy/beam
! Clean residual mean=-0.000001 rms=0.000633 Jy/beam
! Combined flux in latest and established models = 0.0310232 Jy
! Performing phase self-cal
! Adding 45 model components to the UV plane model.
! The established model now contains 135 components and 0.0310232 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053910Jy  sigma=1.029109
! Fit after  self-cal, rms=0.053789Jy  sigma=1.025470
! Inverting map 
selfcal true, true, soltime1
! Performing amp+phase self-cal over 120 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053789Jy  sigma=1.025470
! Fit after  self-cal, rms=0.053850Jy  sigma=1.025327
dynam = dynam - 0.75
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.453 mas, bmaj=9.762 mas, bpa=73.6 degrees
! Estimated noise=1.47694 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00170026 Jy
! Component: 100  -  total flux cleaned = 0.00183168 Jy
! Component: 150  -  total flux cleaned = 0.00172778 Jy
! Component: 200  -  total flux cleaned = 0.00234239 Jy
! Total flux subtracted in 200 components = 0.00234239 Jy
! Clean residual min=-0.001612 max=0.001611 Jy/beam
! Clean residual mean=-0.000001 rms=0.000516 Jy/beam
! Combined flux in latest and established models = 0.0333656 Jy
selfcal
! Performing phase self-cal
! Adding 46 model components to the UV plane model.
! The established model now contains 160 components and 0.0333656 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053342Jy  sigma=1.017698
! Fit after  self-cal, rms=0.053229Jy  sigma=1.016403
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000931476 Jy
! Component: 100  -  total flux cleaned = 0.00173117 Jy
! Component: 150  -  total flux cleaned = 0.00191251 Jy
! Component: 200  -  total flux cleaned = 0.00157532 Jy
! Total flux subtracted in 200 components = 0.00157532 Jy
! Clean residual min=-0.001352 max=0.001348 Jy/beam
! Clean residual mean=0.000000 rms=0.000467 Jy/beam
! Combined flux in latest and established models = 0.0349409 Jy
! Performing phase self-cal
! Adding 58 model components to the UV plane model.
! The established model now contains 186 components and 0.0349409 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052911Jy  sigma=1.010963
! Fit after  self-cal, rms=0.052834Jy  sigma=1.010085
! Inverting map 
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.052834Jy  sigma=1.010085
! Fit after  self-cal, rms=0.054406Jy  sigma=1.009525
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.47 mas, bmaj=9.782 mas, bpa=73.45 degrees
! Estimated noise=1.47229 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00055932 Jy
! Component: 100  -  total flux cleaned = 0.000464165 Jy
! Component: 150  -  total flux cleaned = 0.000214814 Jy
! Component: 200  -  total flux cleaned = -0.000179859 Jy
! Total flux subtracted in 200 components = -0.000179859 Jy
! Clean residual min=-0.001270 max=0.001271 Jy/beam
! Clean residual mean=0.000000 rms=0.000442 Jy/beam
! Combined flux in latest and established models = 0.0347611 Jy
selfcal
! Performing phase self-cal
! Adding 57 model components to the UV plane model.
! The established model now contains 213 components and 0.0347611 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.054116Jy  sigma=1.005504
! Fit after  self-cal, rms=0.054043Jy  sigma=1.004371
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00100425 Jy
! Component: 100  -  total flux cleaned = 0.00170252 Jy
! Component: 150  -  total flux cleaned = 0.00131528 Jy
! Component: 200  -  total flux cleaned = 0.000951048 Jy
! Total flux subtracted in 200 components = 0.000951048 Jy
! Clean residual min=-0.001187 max=0.001175 Jy/beam
! Clean residual mean=0.000001 rms=0.000410 Jy/beam
! Combined flux in latest and established models = 0.0357121 Jy
! Performing phase self-cal
! Adding 61 model components to the UV plane model.
! The established model now contains 255 components and 0.0357121 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053810Jy  sigma=1.000051
! Fit after  self-cal, rms=0.053777Jy  sigma=0.999424
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
win_mult = win_mult * 1.2
selfcal true, true, soltime2
! Performing amp+phase self-cal over 20 minute time intervals
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.053777Jy  sigma=0.999424
! Fit after  self-cal, rms=0.055306Jy  sigma=0.999066
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.401 mas, bmaj=8.559 mas, bpa=75.9 degrees
! Estimated noise=2.0406 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000813996 Jy
! Component: 100  -  total flux cleaned = -0.00067151 Jy
! Component: 150  -  total flux cleaned = -0.000543031 Jy
! Component: 200  -  total flux cleaned = -0.000544212 Jy
! Total flux subtracted in 200 components = -0.000544212 Jy
! Clean residual min=-0.000717 max=0.000719 Jy/beam
! Clean residual mean=0.000000 rms=0.000221 Jy/beam
! Combined flux in latest and established models = 0.0351679 Jy
selfcal
! Performing phase self-cal
! Adding 38 model components to the UV plane model.
! The established model now contains 287 components and 0.0351679 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055229Jy  sigma=0.997117
! Fit after  self-cal, rms=0.055210Jy  sigma=0.996848
flux_cutoff = imstat(rms) * dynam
! Inverting map 
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  selfcal
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.000557098 Jy
! Component: 100  -  total flux cleaned = 0.000747823 Jy
! Component: 150  -  total flux cleaned = 0.00089507 Jy
! Component: 200  -  total flux cleaned = 0.000930303 Jy
! Total flux subtracted in 200 components = 0.000930303 Jy
! Clean residual min=-0.000592 max=0.000594 Jy/beam
! Clean residual mean=0.000000 rms=0.000185 Jy/beam
! Combined flux in latest and established models = 0.0360982 Jy
! Performing phase self-cal
! Adding 34 model components to the UV plane model.
! The established model now contains 305 components and 0.0360982 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055143Jy  sigma=0.995790
! Fit after  self-cal, rms=0.055132Jy  sigma=0.995665
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
win_mult = win_mult / 1.2
print "============== Finished amplitude self-cal =============="
! ============== Finished amplitude self-cal ============== 
restore
! Inverting map and beam 
! Estimated beam: bmin=2.483 mas, bmaj=9.771 mas, bpa=73.32 degrees
! Estimated noise=1.47294 mJy/beam.
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.483 x 9.771 at 73.32 degrees (North through East)
! Clean map  min=-0.0041494  max=0.026793 Jy/beam
if(peak(flux) > thresh)
  selfcal true, true
  clean clean_niter,clean_gain
  selfcal
  flux_cutoff = imstat(rms) * dynam
  repeat
    if (peak(flux) > flux_cutoff) peakwin win_mult
    clean clean_niter,clean_gain
    flux_cutoff = imstat(rms) * dynam
    selfcal
    new_peak = peak(flux)
    until(new_peak<=flux_cutoff)
  selfcal true, true
  end if
print "============== Clearing model and starting over =========="
! ============== Clearing model and starting over ========== 
clrmod true
! clrmod: Cleared the established and tentative models.
uvw 2,-1
! Uniform weighting binwidth: 2 (pixels).
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=2.18 mas, bmaj=9.921 mas, bpa=74.04 degrees
! Estimated noise=2.01637 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.0204522 Jy
! Component: 100  -  total flux cleaned = 0.0197972 Jy
! Component: 150  -  total flux cleaned = 0.0189014 Jy
! Component: 200  -  total flux cleaned = 0.0184668 Jy
! Total flux subtracted in 200 components = 0.0184668 Jy
! Clean residual min=-0.006143 max=0.006101 Jy/beam
! Clean residual mean=-0.000008 rms=0.001963 Jy/beam
! Combined flux in latest and established models = 0.0184668 Jy
uvw 0,-1
! Uniform weighting is not currently selected.
! Gridding weights will be scaled by errors raised to the power -1.
! Radial weighting is not currently selected.
flux_cutoff = imstat(rms) * dynam
! Adding 42 model components to the UV plane model.
! The established model now contains 42 components and 0.0184668 Jy
! Inverting map and beam 
! Estimated beam: bmin=2.483 mas, bmaj=9.771 mas, bpa=73.32 degrees
! Estimated noise=1.47294 mJy/beam.
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 0.00111325 Jy
! Component: 100  -  total flux cleaned = 0.000829729 Jy
! Component: 150  -  total flux cleaned = 0.00130014 Jy
! Component: 200  -  total flux cleaned = 0.00216542 Jy
! Total flux subtracted in 200 components = 0.00216542 Jy
! Clean residual min=-0.003480 max=0.003480 Jy/beam
! Clean residual mean=-0.000010 rms=0.001330 Jy/beam
! Combined flux in latest and established models = 0.0206322 Jy
! Adding 56 model components to the UV plane model.
! The established model now contains 95 components and 0.0206322 Jy
! Inverting map 
uvtaper 0.3,taper_size
! Gaussian taper: value 0.3 at UV radius = 20 mega-wavelengths.
clean clean_niter,clean_gain
! Inverting map and beam 
! Estimated beam: bmin=4.401 mas, bmaj=8.559 mas, bpa=75.9 degrees
! Estimated noise=2.0406 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -0.000113448 Jy
! Component: 100  -  total flux cleaned = 0.000546947 Jy
! Component: 150  -  total flux cleaned = 0.000914909 Jy
! Component: 200  -  total flux cleaned = 0.000735257 Jy
! Total flux subtracted in 200 components = 0.000735257 Jy
! Clean residual min=-0.001433 max=0.001437 Jy/beam
! Clean residual mean=-0.000001 rms=0.000457 Jy/beam
! Combined flux in latest and established models = 0.0213674 Jy
flux_cutoff = imstat(rms) * dynam
repeat
  if (peak(flux) > flux_cutoff) peakwin win_mult
  clean clean_niter,clean_gain
  flux_cutoff = imstat(rms) * dynam
  keep
  new_peak = peak(flux)
  until(new_peak<=flux_cutoff)
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = -8.59364e-05 Jy
! Component: 100  -  total flux cleaned = -0.000436601 Jy
! Component: 150  -  total flux cleaned = -0.000612615 Jy
! Component: 200  -  total flux cleaned = -0.00107024 Jy
! Total flux subtracted in 200 components = -0.00107024 Jy
! Clean residual min=-0.001527 max=0.001538 Jy/beam
! Clean residual mean=-0.000000 rms=0.000488 Jy/beam
! Combined flux in latest and established models = 0.0202972 Jy
! Adding 67 model components to the UV plane model.
! The established model now contains 161 components and 0.0202972 Jy
! Inverting map 
uvtaper 0,0
! No UV-taper is currently set.
clean
! Inverting map and beam 
! Estimated beam: bmin=2.483 mas, bmaj=9.771 mas, bpa=73.32 degrees
! Estimated noise=1.47294 mJy/beam.
! clean: niter=200  gain=0.03  cutoff=0
! Component: 050  -  total flux cleaned = 5.75629e-05 Jy
! Component: 100  -  total flux cleaned = -0.000471821 Jy
! Component: 150  -  total flux cleaned = -0.000467772 Jy
! Component: 200  -  total flux cleaned = -0.000353853 Jy
! Total flux subtracted in 200 components = -0.000353853 Jy
! Clean residual min=-0.001744 max=0.001747 Jy/beam
! Clean residual mean=-0.000002 rms=0.000598 Jy/beam
! Combined flux in latest and established models = 0.0199434 Jy
selfcal
! Performing phase self-cal
! Adding 52 model components to the UV plane model.
! The established model now contains 209 components and 0.0199434 Jy
! 
! Correcting IF 1.
! 
! Correcting IF 2.
! 
! Correcting IF 3.
! 
! Correcting IF 4.
! 
! Fit before self-cal, rms=0.055431Jy  sigma=0.998670
! Fit after  self-cal, rms=0.055328Jy  sigma=0.996162
wmodel J0507+7912_S_map.mod
! Writing 209 model components to file: J0507+7912_S_map.mod
wobs   J0507+7912_S_uvs.fits
! Writing UV FITS file: J0507+7912_S_uvs.fits
wwins  J0507+7912_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
![Exited script file: /opt64/bin/pima_mupet_01.dfm]
! 
wmap   /scr/pima/rv123_uvs/J0507+7912_S_map.fits
! Inverting map 
! restore: Substituting estimate of restoring beam from last 'invert'.
! Restoring with beam: 2.483 x 9.771 at 73.32 degrees (North through East)
! Clean map  min=-0.0069785  max=0.017193 Jy/beam
! Writing clean map to FITS file: /scr/pima/rv123_uvs/J0507+7912_S_map.fits
wmodel /scr/pima/rv123_uvs/J0507+7912_S_map.mod
! Writing 209 model components to file: /scr/pima/rv123_uvs/J0507+7912_S_map.mod
wobs   /scr/pima/rv123_uvs/J0507+7912_S_uvs.fits
! Writing UV FITS file: /scr/pima/rv123_uvs/J0507+7912_S_uvs.fits
wwins  /scr/pima/rv123_uvs/J0507+7912_S_map.win
! wwins: No CLEAN windows to write.
! Error occured in command: wwins
! 
float peak_flux
peak_flux = peak(flux,max)
print "The peak flux is", peak_flux
! The peak flux is 0.017193 
invert
! Inverting map 
float image_rms
image_rms = imstat(rms)
print "The final image rms is",image_rms
! The final image rms is 0.000550306 
loglevs 100*3*image_rms/peak_flux
! The new contour levels are:
!  -9.60226 9.60226 19.2045 38.409 76.8181
print "clev=      ", int(3*image_rms*10000)/10000
! clev=       0.0016 
print "peak=      ", int(1000*peak_flux)/1000
! peak=       0.017 
print "dyn_range= ", int(1000*peak_flux/image_rms)/1000
! dyn_range=  31.242 
quit
! Quitting program
! Log file /scr/pima/rv123_uvs/J0507+7912_S_dfm.log closed on Sun Dec 23 05:01:24 2018